Cleaning Tenders

Description: [e Waste Certificate Required] Scrap Electric Items Such As Electric Ballast, Geysers, X Ray Machine, Transformer, Electronic Weilding Rods, Panel, Electrical Box, Electric Convertet / Inverter, Chock, Small Rotor / Motor Part, Different Type Of Switch, Rtu, Capacitor, Transformer, Heating Device, Measuring And Testing Instruments, Electric Heater Geasers, Pantry Items Speakers, Electric Fuses And Bulb, Ictp, Light Board, Various Types Of Meters, Stabilizing Device, Fitting Cap, Charging Devices, Regulator, Lighting Device, Starter, Sfu, Terminals, Water Level Gauge, Led, Home Appliances, Welding Holder, Electric Iron, Cards, Oven, Lamp, Contact, Elb, Vacuume Cleaner, Microscope, Weingh Machine, Emergency Tubelight, Rotary Switch, Holder, Ups, Socket, Inverter, Current Regulator Meter, House Hold Electric Devices, Coil, Timer, Hooter, Fuse, Washing Machine, Speaker, Water Purifier, Fuse Switch, Digital Frequency Meter, Transmitter, Dc Regulator Power Supply, Electric Shock Protector, Circuit Breaker, Inverter, Air Circuit Braker, Heater Element, Pantry Items, Hospital Equipment, Relay, Converter, Wire, And Other Electrical Items. All Are With / Without Parts And Attachments Old Used And U.s.

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: The Contractor Should Clean The Sub-division Office Colony Premises Water Works Premises Its Premises By Brooming Through Out Including Disposing Off All The Dust Or Waste Material As Directed By Engineer Including Maintenance Of Garden

Details: Description :kit Of Filters Consisting Of Following Items Suitable To Cummins Make Diesel Engines Of Model Nt 855 R/nta 855 R. A. Element A ir Cleaner To Cummins Part No: 3237742/ Fleetguard Part No: Af0192200 M/parker Part No: Bsk4177 - (qty: 01 No) B. Element Air Cleaner To cummins Part No: 3872336/fleetguard Part No: Af0192100 M/parker Part No: Bsk4178 - (qty: 01 No) Make: Cummins/fleetguard/parker/bal dwin Only. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Providing Services For Day To Day Running Operation, Routine Maintenance & Preventive maintenance Of Pump Sets, Dg Set All Electrical Installations Such As Light Points, Fans Points, Exhaust fan Points, Call Bell Points, Light/ Power Plug Points, All Electrical Fitings & Fixtures I/c Sub- Station With associated Accessories And Equipments, Control Panel, Edbs/ Sdbs, Feeder Pillar, Compound Lights, repairing Of Defective Parts Of Above Installation And Cleaning, Oiling Greasing I/c Rectification Of Faults i/c Connections, Interconnections I/c Carring Out Preventive Maintenance I.e. Insulation Test, Earth test, Polarity Tests, Checking And Filling Of Distilled Water Etc. Of Complete Installation And Keeping The all Installation Neat And Clean Always And Maintaining All Relevant Log Books For Each System Etc. As reqd. On All Working Days I/c Sunday & Holidays By Providing Following Minimum Multi Disciplined E&m staff /workman As Per Duty Chart Prepared By Site Incharge And As Per Terms & Conditions . ( 1 Nos highly Skilled +1 Nos Skilled +2 Nos Semi Skilled+2 Nos Unskilled Persons ) With Weekly Rest Required at Each Station In As Per Required Shifts Of Eight Hours ) (availability Of Staff As Requirement Is For 24x7 hour) Note: Please Quote The Rate Either Above Or At Par For Schedule - 1. If Bidders Intend To Quote overall Rebates For All Schedules, Then They Must Ensure That Final Amount For Schedule - 1 Must Not go Below The Advertised Value For Schedule-1 I.e.rs.4,03,36,758.26/- Failing Which Offer Shall Be summarily Rejected

Details: Pipe Flexible , Mounting Pad , Lub Oil Filter Spin Type , Lub Oil filter , Fuel Water Separator , Exhaust Assy , Element Fuel filter , Element For Air Cleaner , Disc Coupling , Automatic voltage Regulator , Air Filter

Description: Allocation No.04091198.on As Is Where Is Basis. Sc. Condemned Structure Consisting Of Rly Quarter Nos.[1]rt/2 (a To T), [2]rt/3 (a To T), [3] Rt/4 (a To T), [4] Rt/5 (a To T), [5] Rt/9 (a To H), [6] Rt/10 (a To T), [7] Rt/11 (a To T), [8] Rt/12 (a To T), [9] Rt/13 (a To T). Total-168 Units. Qty-01 By Lot. Location- Danga Para Railway Colony. Condition-purchasers Are Advised To See The Lot Before Bidding. Structure Wise Details Of Items Are Available With The Custodian. The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian, Nominated Isa-sv And Nominated Rpf Personal. Dismantling Work Of Sold Structures Is To Be Done By The Purchaser On His Own Arrangement. Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Levels Of The Condemned Structures. Dismantling Of The Condemned Structure [sold Lot] Will Take Place In Presence Of Engg. Officials. Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety And Running Of Trains, Life And Rly. Property In Near Vicinity. After Dismantling Of The Condemned Structures [sold Lot] Purchaser Will Make The Railways Land Clean, Clear, And Level For Further Use. Nb: Free Delivery Period Is Allowed For 80 (eighty) Days.

Description: CATEGORY: DG servicing 15 KVA , DG servicing 20-25 KVA , DG servicing 30-40 KVA , DG servicing 50-63 KVA , DG servicing 100-125 KVA , DG servicing 160-200 KVA , Providing fixing of 12 volt 100 Ah maintenance free Battery , Providing fixing of 12 volt 130 Ah maintenance free Battery , Providing fixing of 12 volt 150 Ah maintenance free Battery , Providing fixing of 12 volt 180 Ah maintenance free Battery , Replacement of Stop Solinoid 12 volt , Mechanical Type RPM Cum Hour Meter , RPM Cum Hour Meter Chain , 12 V 10 amp Battery Charger SMPS ic Transformer , Oil pressure gauge , Oil temperature meter , Oil temperature safety , Water temperature meter , Starting key switch , 100 amps THREE POLE MCCB 18 KA , VAF meter , 32 Amp 4 pole MCB , 63 Amp 4 Pole MCB , DC voltmeter , DC Ammeter , Auto manual Rotary switch , Overspeed safety , Battery leads flexible ic terminals , Coolant , Flexible wire braided fuel pipe. , Benzo Bolts. , Engine start relay , V Belt , LED Type Indication Lights , Repairing and General Servicing of the existing faulty radiator Upto 20KVA DEA set , Repairing and General Servicing of the existing faulty radiator above 20KVA Upto 50KVA DEA set , Servicing of the self starter of DEA set , Repairing of following faulty items in the self starter Carbon bush set , Repairing of following faulty items in the self starter Solenoid coil , Repairing of following faulty items in the self starter Bendex Gear , Supplying and installation of 12 volt battery operated self starter , Calibration of the fuel injection pump up to 20 KVA DEA set , Calibration of the fuel injection pump More than 20 KVA and up to 50 KVA , Extra charges for associated items of fuel pump Delivery valve , Extra charges for associated items of fuel pump Delivery element , Extra charges for associated items of fuel pump Nozzle , Repairing of cylinder head , Replacement Repairing of faulty AVR Make National or SS , Replacement Repairing of faulty Power Diode for Rotating Rectifier Assembly , Rewinding of existing parts upto 50 KVA Main Stator winding , Rewinding of existing parts upto 50 KVA Main rotor winding , Rewinding of existing parts upto 50 KVA Exciter Stator winding , Rewinding of existing parts upto 50 KVA Exciter rotor winding , Repairing of existing canopy of 15 KVA DG set , Rewinding of existing exhaust fan in 15 KVA DG silent enclosure , Supplying and fixing of 450 mm sweep , Replacement of on load Changeover switches Four Pole 32A with side handle with SS enclosure , Replacement of on load Changeover switches Four Pole 63A with side handle with SS enclosure , Repairing of control wiring of existing , Replacement of faulty coupling 10 15 KVA , Replacement of faulty coupling 20 30 32 KVA , Dismentling the Fuel tank from canopy and Cleaning the tank , Dismentling the Fuel tank from canopy and trasporting the same

Description: CATEGORY: Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) , File Folder Cover (V2) (Q4) , Dak Pad (V2) (Q4) , Register (V2) (Q4) , conference folder (Q4) , Report Cover (Q4) , Document Folder (Q4) , Plastic Container (V2) (Q4) , paper or eyelet punches (Q4) , Metric Steel Scales (V2) as per IS 1481 (Q4) , Tags for Files (V2) as per IS 8499 (Q4) , Staplers (V2) (Q3) , Air Freshener Solid and Gel (Q4) , Fluid Correction Pen (V2) (Q4) , Paper Adhesive, Liquid Gum and Office Paste Type as per IS 2257 (Rev) (Q3) , stamp pads (Q4) , Permanent Marker Pen (Q4) , scissors (Q4) , Sketch Pen (V2) (Q4) , Stapler Pin / Staples (V2) (Q4) , Seat Cushioned Foam (Q4) , Waste Containers and Accessories - Domestic (V2) (Q3) , Highlighter Pen (Q4) , Toilet Soap or Liquid (Q4) , Glass Cleaner, Liquid (V2) as per IS 8540 (Q4)