Cables Tenders

Details: Description:- Supply, Installation, Testing, Commissioning Of On Grid Solar Power Plant At Roof Top Of various Station Buildings And Platform Shelters, Including Wall Mounted Type Inverter, Spv Array, module Mounting Structure, Power Conditioning Unit, , Mppt, Controls, Protections, Interconnecting cables, Switch Gears, Necessary Features To Supplement The Grid Power, Power Factor >0.9, Operating temperature -25 To +60 Deg. C, Solar Meter, Net Meter Approved By Govt. , Operating Voltage Range 200 V To 1000 V, Max. Input Current 28.5 Amp. For Each Mppt, Complete With All Accessories As Per attached Technical Specification. (grid Connected Solar Power Plants Are To Be Provided On Rooftop Of various Station Buildings And Platform Sheds Over Bikaner Division. Location Of These Are Scattered In the Division. Inverter, Solar Meters, Net Meters And Other Accessories May Be Provided At Each Of The location As Per State Electricity Board Norms. Therefore Bidder May Keep In Mind While Quoting The bid For The Same. No Extra Charge Will Be Paid By Railway For The Same.)

Details: Design, Manufacture, Supply, Installation, Testing And Commissioning Of Microprocessor Based Electronic Interlocking (ei) System In "hot Stand By Mode"at Durgapura (dpa), Sanganer (sngn) And Shivdaspura Padampura (sas) Stations Including Alteration Work In Existing Medha Make Ei At Jaipur (jp) With Provision Of Automatic Block Signalling (abs For Jp-sas) And At Devpura (dpz), Chauth Ka Barwara (ckb), Isarda (isa), Siras (sras), Banastwali Niwai (bnlw), Channani (chnn),chaksu (cks) And Sawai Madhopur (swm) With Provision Of Absolute Block Signalling With Double Distant (sas-swm Section) And Mid Section Interlocked Lc Gates For Execution Of Indoor And Outdoor Signalling And Telecom Works, Which Includes Excavation Of Trench, Laying Of Cables, Casting Of Foundations Of Macls Signals & Apparatus Cases, Erection/ Installation Of Macls Signals, Fixing & Wiring Of Track Circuits & Point Machines, Centralized Operation Of Points & Signals, Hassdac, Block, Installation Of Telecomm Equipments As Per Re Standard In Connection With Doubling Work In Phased Manner Of Jaipur-sawai Madhopur Section Of Jaipur Division On North Western Railway.

Details: Amtc of EPHS in sector 4 and 5 UE Karnal Prov and laying of 100mm i/d GI pipe prov and fixing of 10mm 3 core submerisble flat cable repair of submersible motor complete in all respect and all other works contingent thereto A/ C Rs 1.60 Lacs

Details: Consultants For The Work Consultancy Services For To Provide Third Party Quality Assurance And Quality Control For The Infrastructure Works Like Buildings/roads/water Supply Lines/sewer Lines/storm Water Drains/ Bridges/electrical Items Like Cable For Service Connections, Central Lighting, Bore Well Parts Etc In Khammam Municipal Corporation Limits, Khammam

Details: Description:- Supply Of Electron Beam Irradiated Thin Walled Flexible Elastomeric Cable With Copper conductors For Working Voltage Above 750 V Upto 1.8 Kv/3.0 Kv Conforming To Rdso Spec No. elrs/spec/elc/0019, Rev-4 Of Feb 2018. Size:1.5 Sq.mm.

Details: Supply, Erection, Testing & Commissioning Of 220kv Mc Line At Radhanesda Substation From Ap-27 (to Be Connected To Tharad & Ghodasar Via Separate Dc Lines) Having Route Length 20.610 Km With Al-59 (61/3.50) Conductor On M/c Tower And Opgw Cable On Turnkey Basis.

Details: Description :copper Tubular Crimping Socket For 25 Sq.mm E Beam Cable And With M16 Stud Hole, As Per edts-200,am-2, Corr 3, Table-1,item-23 Makes:icf/rcf/mcf/rdso Approved Sources [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Description: CATEGORY: HT BOLT FOR FRONT COVER Part no CB100D11 , HT BOLT FOR TOP COVER Part no CB100D11A , HT BOLT FOR CABLE BOX Part no CB100D11B , SENSETIVE CBT FOR EL RELAY 750MA Part no CB100D2MA , CURRENT TRANSFORMER FOR OVERLOAD Part no CB100D3 , SENSITIVE EARTH LEAKAGE RELAY UPTO 750MA Part no CB100C3MA , HT BOLT FOR TOP COVER Part no CB200D11A , HT BOLT FOR FRONT COVER Part no CB200D11 , BUSH INSULATOR FOR OUTGOING INTERLOCKING Part no CB200D21A , SENSITIVE CBT FOR EL RELAY 750MA Part no CB200D2MA , HT BOLT FOR CABLE BOX Part no CB200D11B , BUSH INSULATOR FOR THROUGH GOING INCOMIN Part no CB200D21 , EARTH LEAKAGE RELAY 750MA Part no CB200C3MA , BUSH INSULATOR FOR THROUGH GOING INCOM Part no CB300D21 , BUSH INSULATOR FOR OUTGOING INTERCONNE Part no CB300D21A , INTERLOCKING PLUNGER WITH SPRING Part no CB200D24 , INTERLOCKING PLUNGER WITH SPRING Part no CB300D24 , HT ALLEN BOLT FOR FRONT COVER Part no CB300D11 , HT ALLEN BOLT FOR TOP COVER Part no CB300D11A , HT BOLT FOR CABLE BOX Part no CB300D11B , NEUTRAL RESISTOR Part no SDPA00017 , SENSITIVE EARTH LEAKAGE RELAY UPTO 750MA Part no SDPA0019MA , FRONT COVER BOLT Part no SDPA0010 , TOP COVER BOLT Part no SDPA0011 , HRC FUSE BASE WITH CARRIER Part no SDPA00013 , HRC FUSE Part no SDPA00016 , RESISTANCE FOR PILOT RELAY Part no SDPA00017A , TEST RESET MICRO SWITCH Part no SDPA00018 , HT BOLT FOR TERMINAL BOX Part no SDPA0014 , SENSITIVE CBT FOR 750 MA EARTH LEAKAGE R Part no SDPA0019AMA , HT BOLT FOR PLUG AND SOCKET Part no SDPA0016 , PILOT RELAY Part no SDPA00012B , HT BOLT FOR TOP COVER Part no FGI33 , SENSITIVE CBT FOR EARTH LEAK AGE RELAY 75 Part no FG116MA , SENSITIVE EARTH LEAKAGE RELAY UPTO 750MA Part no FG115MA , HT BOLT FOR TERMINAL BOX Part no FG134 , HT BOLT FOR FRONT COVER Part no FG132 , PILOT RELAY Part no FG120 , AUXILIARY TRANSFORMER 150VA Part no FG119A , MAIN CONTACTOR KIT FOR 90 150 HP Part no FDB102B2 , SENSITIVE EARTH LEAKAGE RELAY 750MA Part no FDB114MA , AUXILLARY CONTACTOR Part no FDB142 , START STOP MICRO SWITCH Part no FDB122 , TEST RESET SPINDLE WITH FLAPPER Part no FDB124 , CT FOR OVERLOAD Part no FDB119 , CT FOR AMMETER Part no FDB120 , MAIN CONTACTOR 50A Part no SDPA000141AN , MAIN CONTACTOR COIL FOR 90 150 HP Part no FDB102B1 , MAIN CONTACTOR 90 150 HP Part no FDB102B , AUXILIARY TRANSFORMER 250 VA Part no FDB117B , TEST MICROSWITCH Part no CB100C5 , PILOT RELAY Part no FDB131 , OCTAL PLUG BASE Part no FDB132 , HT BOLT FOR TERMINAL BOX Part no FDB130 , HT BOLT FOR TOP COVER Part no FDB129 , HT BOLT FOR FRONT COVER Part no FDB128 , STOP PLUNGER Part no FDB127 , START PLUNGER Part no FDB126 , RELAY BASE ONLY Part no SDPA00012F

Details: Description :copper Tubular Crimping Socket For 25 Sq.mm E Beam Cable And With M16 Stud Hole, As Per edts-200,am-2, Corr 3, Table-1,item-23 Makes:icf/rcf/mcf/rdso Approved Sources [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Testingofemergencycommunicationandrlyautotelephonecommunication through Emc Socket With All Control Boards Via S&t Control Room. This Schedule Includes Painting Of each Emc Socket Post Once In A Year, Replacement And Restoration Of Defective Emc Sockets, Box derivation Joint And Testing/fault Analysis Of Section Cable If Any. Testing Shall Be Carried Out With Gps enable Mobile App. Technical Specification Of Gps Enable Mobile App And Web Application And Its working Is Enclosed In Technical Specification. All Other Consumables Required For Maintaining The emc Sockets Shall Be Supplied By The Contractor And Also Contractor Has To Arrange Testing And measuring Equipment (wayside & Hq) For Testing Of Emc And Auto Telephone Circuits. This Schedule does Not Includes Supply Of 6 Pin Socket, Emc Box, Derivation Jointing Kit And Restoration Of Defective 6-quad & Pijf Cable.