Cabinet Tenders

Airports Authority Of India - AAI Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Tender Amount Updated
Chittoor, Andhra Pradesh
Details: CATEGORY: Bookcase , Mini Storage or Mini Shelf , Locker 6 main 1 PLUS 1 , Vault 6 main 1 PLUS 3locker , Angle Rack , Vertical filling Cabinet , Study Chair or Trainee Chair , Small Table , Table , Premium Leatherette 3 seater sofa , Single Bed , Single Mattress , Pillow , Dressing Table , High Back Chair , Medium Back Chair , Visitor Chair , Conference TABLE L 4900MM X D 1800MM X H 750MM for Negotiation Room , Conference TABLE L 6250MM X D 1800MM X H 750MM for Anti Hijack Control Room , Conference Table Seater TABLE L 8950MM X D 1800MM X H750MM for Conference Room , Steel Almirah
Closing Date19 May 2025
Tender Amount₹ 37.7 Lac 

South Central Railway - SCR Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
Ireps
Hyderabad, Telangana
Details: Description :insulation Monitoring Relay, 415v Ac, 3 Phase, Neutral Isolated, Voltage Range 0-500 V Ac, Insulation Measuri ng Range-10 K Ohm To 150 K Ohm, Control Voltage: 24 - 240 V Ac/dc,as Per Page No: 39, S.no.63, Item Code: A2 And Place Of I nstallation S1a7, Of Bill Of Material Of Rdso Spec. No. Rdso/pe/spec/ac/0184-2015(rev.1), Used For Insulation Control 415 v Of Lhb Type Ac Coaches, Confirming To Rdso Spec. No.rdso/pe/spec/ac-0184-2015 (rev.1), Suitable For Lhb Type Ac Coaches switch Board Cabinet (s1a07). [ Warranty Period: 30 Months After The Date Of Delivery ] ]
Closing Date26 Apr 2025
Tender Amount₹ 5 Lac 
This is an estimated amount, exact amount may vary.

Central Public Works Department - CPWD Tender

Goods
Furnitures and Fixtures
GEM
New Delhi, Delhi
Details: BOQ ITEMS: Providing making and fixing in position wooden almira with aluminium framed glazed shutter of size approx 2840, 590, 2310mm ht depth approx 590mm 600mm, as per approved design, the almira top, bottom, side, partition, shelve, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface, unit back shall be consisting of 6mm thick commercial ply, all the exposed edges shall be covered with 20mm to 25mm wide edge binding pvc tape, aluminium shutter with 45, 25mm profile panel fixed with 8mm thick fluited glass of approved shade, the cost including all necessary, cotton rod, hinges L vihari 0, nails, screws, fevicol etc. All complete as per the direction of the engineer in charge. front elevation of the almira shall be measure for the payment purpose, Providing making and fixing in position wooden almira of size approx 1030, 530, 2370mm ht, with aluminium profile glazed shutter as per approved design, the almira top, bottom, side, shelve, partition, drawer head, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer and inner surface, drawer side, drawer back, base, unit back shall be made up of 12mm commercial ply, shutter shall be made up of 8mm thick tinted glass with aluminium framed shutter as per approved design, all the exposed edges shall be covered with edge binding pvc tape, the cost including all necessary hinge L vihari 0, nails, screws, fevicol etc. all complete as per the direction of engineer in charge., Providing making and fixing in position wooden showcase unit of size approx 4400, 580, 3130mm ht. having two side unit of size approx 990mm width, middle unit of 2420mm width and having one overhead unit of 790mm height. as per approved design, the showcase top, bottom, middle tops, shelve, partition, middle cabinet middle shutter, top overhead shutters, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface, side cabinets and bottom side of middle cabinet shall be consisting of aluminium profile glazed shutter with fluited glass design, unit back shall be consisting of 12mm thick commercial ply, all the exposed edges shall be covered with edge binding pvc tape, both type of shutter shall be fixed with L vihari hinges of hettich or equivalent make, the cost including all necessary hinges, profile shutter, nails, screws, fevicol etc. all complete as per the direction of the engineer in charge., Providing making and placing in position wooden overhead cabinet of size approx 1200mm, 400mm, 600mm ht, as per approved design, the cabinet top, bottom, side, shutter, shelve, unit back shall be made up of 18mm thick hdhmr ply of Action Tesa or equivalent make, and finished with 1mm laminate on inner surface, all exposed edges shall be covered with edge binding pvc tape, finishing outer exposed wooden surface with high quality high gloss polish of make Sirca or equivalent, the cost including all necessary hinges L vihari 0, nails, screws, fevicol, fastner etc. all complete as per the direction of engineer in charge., Providing, making and fixing in position wooden palmet of size approx 370mm depth and 200 mm wide face, as per approved design, the palmet top, side, front shall be made up of 19mm thick commercial ply of make Duro Green or equivalent, and finished with 5.5mm thick hdhmr ply of make Action Tesa or equivalent, fixing on the top ceiling with the help of 100mm fastner, finally all wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent, the cost including all necessary fastner, nails, screws, fevicol etc. All complete as per the direction of engineer in charge. Running length of the palmet shall be measure for the payment purpose., Providing making and fixing in position stainless steel framed glazed partition, of size approx 1066mm , 2350mm ht, having 3 nos. frame, as per approved design, top and bottom circle frames consisting of 8mm thick tinted brown toughened glass, middle oval shape frame shall be consisting of 8mm thick fluted toughened glass as per approval, ss frame shall be finished with gold colour pvd coating with all necessary process, fixing on site with the help of rectangular frame of 75, 25mm SS section all around, the cost including all necessary pvd coating, screws, fixing etc. all complete as per the direction of engineer in charge., Providing of Spinetech Luxury Mattress of size approx 72, 78, 8 ht, of Sleepwell or equivalent make as standard quality, all complete as per the direction of engineer in charge., Providing making and placing in position ottoman of size approx 1500mm, 470mm, 470mm ht, as per approved design, the ottoman top, side, front, back, base shall be made up of 19mm thick commercial ply of make Duro Green or equivalent, the top, sides, back, front of the ottoman shall be finished upholstered with foam 50mm, 12mm of 32D of sleepwell or equivalent make and finished stitching with approved shade fabric with all necessary threadroll, adhesive, gun pin, nails, screws, fevicol etc. all complete as per the direction of the engineer in charge., Providing of Mattress of size approx 97, 124, 4 mm thick, as per approval, filing 100mm PU foam of Sleepwell make and cover with approved shade fabric with all necessary sewing, foam, fabric, threadroll etc. all complete as per the direction of engineer in charge., Providing making and fixing of aluminium framed sliding glass shutter having aliminium framed glazed fixed partition around it, fixed portions aluminium frame having section of 50mm, 50mm and fixing 8mm thick toughened glass as per required size in its middle panel, sliding shutter frame of section 65mm x 30mm and fixing 8mm thick toughened sliding glass on it with all necessary sliding fitting arrangement, nails, screws, joint filler, adhesive etc. providing lock arrangement all complete as per the direction of the engineer in charge., Providing making and fixing in position wooden dressing unit cabinet of size approx 1390, 350,160 mm ht, having side table base of size approx 460, 480, 590 mm ht, with having wall panel of size approx 1620, 2440mm as per approved design, wall panel frame shall be made up of hollock wood with required size and section, panel base with 19mm thick commercial ply of make Duro, Green or equivalent, the cabinet top, bottom, side, middle partition, drawer head, side table top, bottom, side, drawer head, panel surface shall be made up of 18mm thick hdhmr ply of make Action Tesa or equivalent, drawer side, drawer back, drawer base, unit back shall be consisting of 12mm thick hdhmr ply, side table outer surface shall be covered with approved shade fabric, all the visible wooden surface shall be finished with high quality high gloss polish of make Sirca or equivalent, the cost including all necessary 300mm quadro push channel, nails, screws, fevicol etc. all complete as per the direction of the Engineer in charge., Providing making and fixing in position wooden dressing panel of size approx 1450, 2440mm, as per approved design, having dressing table of size approx 1450, 365,770mm ht, having 2 nos. side table as base of size 400, 400, 660mm ht, and top box unit of size 1450, 365, 110mm ht, top side having a open cabinet of size approx 400,160,1680mm ht, and having a panel in other side, the cabinet top, bottom, side, side table, top, bottom, side, drawer head, panel, open cabinet top, bottom, side, shelve shall be made up of 18mm thick hdhmr ply of make Action Tesa or equivalent, panel base shall be consisting of 19mm thick commercial ply of make Duro/Green or equivalent, table box op shall be finished with 12mm thick corian as per approved shade, drawer side, drawer back, base, side table back shall be made up of 12mm thick hdhmr ply, the cost including all necessary push channel 300mm, nails, screws, fevicol etc. all complete as per the direction of engineer in charge.
Closing Date5 Mar 2025
Tender Amount₹ 30.1 Lac 

North Eastern Electric Power Corporation Limited - NEEPCO Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
Lower Subansiri, Arunachal Pradesh
Details: CATEGORY: Godrej Executive Table, Cignus 1800mm Table with ERU 1200mm and Pedestal 1800 X 2100 X 750 , Godrej Table, Cignus 1665mm Table without ERU 1650 X 750 X 750 , Godrej Table, S 1070 1665mm Table 1665 X 900 X 725 , Godrej Table,T- 9 Table 1365 X 680 X 735 , Godrej Chair, Marvel High Back Chair , Godrej Chair, Premium 7001 High Back Chair , Godrej Visitor Chair,Premium 7004 Chair without Arm , Godrej Computer Table, Stylo Table 1200 X 600 X 750 , Godrej Computer Chair, Diva 7042 Chair , Godrej Almirah Storwel Plain , Godrej Filling Cabinet 4 Dr VFC , Godrej Bookcase 4dr Bookcase
Closing Date21 Jan 2025
Tender Amount₹ 15.4 Lac 
This is an estimated amount, exact amount may vary.

Banaras Locomotive Works - BLW Tender

Goods
Healthcare and Medicine
GEM
Corrigendum : Closing Date Modified
Varanasi, Uttar Pradesh
Details: CATEGORY: Wall Paneling , Embeded glass panel , PVC Flooring for OT as per tender specification , Laminar Air Flow, Exhaust Cabinet, and AC ducting as per tender specification , Peripheral Lights and clean room luminaries as per tender specification , Touch screen control panel as per tender specification , Storage units for OT as per tender specifications , Pressure relief Damper as per tender specifications , Automatic Sliding Door as per tender specification , Hermetically sealed Manual Slide Door as per tender specifications , Glass Operating board as per tender specifications , Xray View Box as per tender specifications , Electrical Installation incl Distribution Box internal wiring and switch socket as per tender specification , Single Arm Anesthesia Pendant with Terminal Unit as per Tender Specs , Medical gas pipeline inside OT , Air Handling Unit with ODU as per tender specifications , 2 bay scrub station foot operated and toucless option , PVC flooring for connecting corridors , Hatch box as per specification
Closing Date16 Jan 2025
Tender Amount₹ 46 Lac 

East Coast Railway - ECOR Tender

Goods
Software and IT Solutions...+1Security and Emergency Services
Ireps
Bhubaneswar, Odisha
Details: Description :supply, Installation And Commissioning Of Lobby Tss Equipment Set For Cms With Every Year breath Analyzer Device Calibration And Certificate With Complete Fitment Of Accessories In Numbers Of Sets A s Per Cris Specification No.2007/cris/ndls-hq/cms/project/rollout-ii/0030/pt-1 Date27.12.2018 Or Latest E nclosed As Annexure -a. For Cms Kiosk Specification: 1) 17" Touch Screen With Led Monitor, Cabinet With K eyboard, Mouse, Pen Drive. 2. Thin Client: 1.86 Ghz Or Higher, 4 Gb Ram, 16 Gb Flash Or Higher Cris Image . 3) Biometric - Secugen. 4) Breath Analyser - Tayaltech Or Similar, 5) Usb Camera - Logitech C270, 6) 1 Kva Ups With Complete Fitment Of Accessories. Make - Addsoft/tayaltech/agmatel Or Similar. [ Warranty period: 30 Months After The Date Of Delivery ] ]
Closing Date3 Feb 2025
Tender Amount₹ 45.5 Lac 
This is an estimated amount, exact amount may vary.

Indian Army Tender

Goods
GEM
Corrigendum : Corrigendum Added
Gurdaspur, Punjab
Details: CATEGORY: Mock Built Up Area , Single Storey Building , Double Storey Building , Mud House , Masjid , Watch Tower , Bfg Room 45x14 , Modular Panel , Paint Ball Gun and Accy , Paint Ball Gun , Pellets per gun , CO2 Refilling Stn , Practice Targets , Pop up Targets , Static Targets , Training Aids , Flex Boards 4x3 , Glow sign 12x3 , Briefing , Projector , Computer , AC 1.5 Ton with stabilizer , Podium , Cabinet , Table , Chair , UPS , Interactive Screen , Surveillance Room , Category 6 Cable Outdoor , CP Bullet Camera IP , POE Switch and Port , NVR and Port , RJ Connector , HDD 1TB , Installation , LED Screen 43 Inch , Fire Point , Fire Extinguisher , Buckets , Fire Hook , Fire Beater
Closing Date21 Jun 2025
Tender Amount₹ 1.5 Cr 

NBCC India Limited - NBCC Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
South East Delhi, Delhi
Details: CATEGORY: Wooden Single Bed , Metal Single bed , Wooden Double Bed , Double Mattress , Single Mattress , Single Mattress with Memory Foam , Foam Pillow , Blanket with pillow cover , Bedside Unit , Back Cabinet Unit of size 5500MM X450MM X 3000MM , Back Cabinet Unit of size 4000MM X 450MMX 3000MM , Back Cabinet Unit of size 3500MM X450MM X 3000MM , Wooden Wardrobe of size 1800MM X 900MMX450 MM , Mid Back Revolving chair , 10 seater conference table , 20 seater conference table , 50 seater conference table , Auditorium table , Dressing table , Luggage Rack , Reception Table , Study Table , TV Unit , Wardrobe of size 2100mm H x 1800mm W x 450mm D , Aduitorium chair , High back revolving chair , High back revolving chair natural leather , Cafeteria chair , High back executive chair , Visitor chair Powder coated , Visitor chair Chrome finish , Back Unit , Working Storage , Center Table , Storage Unit of size 4500W X 450D X 1800HT , Working table of size 1500 mml x 600 mm d x 750 mmh , Personal Locker Unit , Coffee Table , Single Seater Sofa , Single seater Recliner , 2 seater sofa , 3 seater sofa , Cafeteria Table , Cubicle workstation with side composite pedestal , Working Cabin table with side composite storage and 1.2 meters height L shaped partition. , Executive Table 3.6 Meter , Executive Table 2.4 Meter , Modular Office Table 1.8 Meter , Single Burner Unit , Support Table , Two Burner Unit , Working Table with sink , Tilting rice Boiler , SS drain , DOSA Chapatti plate , Chapati rolling table , Chapati collecting trolley , Three burner chinese cooking unit , Tandoor Unit SS Gas , Chapati Rolling table , Worktop refidgerator , 4 door vertical Refridgerator , 2 Door Vertical Refridgerator , Chest Freezer , MS Fabricated Rack , Atta maida Bins , SS Soiled Dish , SS 3 sink washing unit , SS Pot rack 4 shelf , Clean dish and glass rack 4 shelf , SS Bain marie with 10 vessel , SS Soiled dish collection Trolley 3 Tier , Water cooler 80 Ltrs , SS paltform trolley , L.P.Gas PIPELINE MANIFOLD SYSTEM , L.P.Gas pipeline , MS Fabricated Cylinder room , HOT AIR VENTILATION SYSTEM , Ductline , External Signage made of SS 304 , Logo Signage , 12mm WPC Letter , Planter 3Ft , Planter 2Ft , Wooden planter 1.5Ft
Closing Date24 Jan 2025
Tender Amount₹ 4.6 Cr 

Airports Authority Of India - AAI Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Corrigendum : Tender Amount Updated
Mumbai, Maharashtra
Description: CATEGORY: 0.75 sq. mm. , 1.5 sq.mm. , 2.5 sq.mm. , 4.0 sq.mm. , 100 Watt Lamps , 200 Watt Lamps , LED 9W , Tube Light Rod , Electrolytic Capacitor of 2.5 micro F , Universal type starter , Penta Piano type 6 A switch of 1 way, White colour , Penta 6A, 2-in 1 pin Socket, white colour , Penta Power switch of 1 way, 20 A, white colour with Two hole fixing , universal Socket, white colour , combined unit with box of Two Fixing hole , 6A, 2in1 switch socket combined with box , Electronic step type fan regulator , Batten holder , 6A Angle holder , Supply of 5A, 3 Pin Ceiling Roseper , 3 Pin Industrial Plug Top, 20 A , 20A, 1 way switch, white color, Modular type , 3 Pin 16A, Socket, white color, Modular type , 3 pin 6A Socket, Modular type , 10A, 1 way Switch, white color, Modular type , Supply of PVC insulation taperoll of 1.8 cm x 7.5 mtr, of colours , 8 X 10 inch PVC switch board boxes, PVC switch board boxes , 3 Module, PVC modular surface switch board boxes with plates , 6 module, PVC modular surface switch board boxes with plates , 8 module, PVC modular surface switch board boxes with plates , Casing -Caping , Supply of ISI marked 20 mm uPVC Conduit Pipe , Lamp, LED, 230V AC, Blue dia 22.5 mm LED indication lamps , Lamp, LED, 230V AC Green dia 22.5mm LED indication lamps , Lamp, LED, 230V AC Red dia 22.5mm LED indication lamps , Lamp, LED, 230V AC Amber dia , Lamp, LED, 230V AC Yellow dia , 2 way Plastic Enclosure distribution Board , Wall Mount Fan , 25x8 mm PVC Rawal Plug , 25 x 8 mm half thread wood screw , 35 x 8 mm half thread wood screw , 50 x 8 mm half thread wood screw , SS pin type Electrical Panel door lock , LED Street light , water Geyser , LED tube light , Water purifier , UPS batteries , Insulation Mat , Insulation Mat LT Pane , Electrical Safety pair of gloves , Electrical Safety pair of Gum Boot , Electrical Safety Helmet , Wall mount First Aid Kit Cabinet , LED Flood light fitting
Closing Date2 Jun 2025
Tender Amount₹ 13.6 Lac 

Indian Navy Tender

Goods
Furnitures and Fixtures...+1Electrical and Electronics
GEM
Corrigendum : Corrigendum Added
Uttara Kannada, Karnataka
Details: CATEGORY: PROVIDING FIXING OF STAINLESS STEEL GRADE MIRROR INCLUDING SURFACE PREPARATION INCLUDING REMOVAL OF OLD PANNEL , APPLICATION OF HIGH STRENGTH MARINE GRADE COMPOSITE PANELS , PROVIDING FIXING OF IMPACT OBSORPTION HIGH DURABILITY INTERLOCKING 15 MM TILE PROFILE MARINE GRADE MATS , FIRE RESISTANCE ALUMINIUM FLASE CEELING , PATTERNED CHARCOAL LOUVERS PANNEL 8 FT X 5 INCH 12 MM , FABRICATION OF STORAGE RACK , FIXING OF BOX SHELF TV CABINET WITH MARINE GRADE PLYWOOD , FIXING APPLICATION OF MDF PANNELING ON EXISTING PANNELS, EXTERIOR GRADE THICKNESS 18 MM WATER RESISTANCE , ACRYLIC WALL LAMINATE SIZE 3 FT X 7 FT , NEON LED BOARDS 6 FT X 4 FT , WALL FIXTURES , LED PROFILE LIGHTS , ELECTRICAL CABLING , CABLE LAYING , ELECTRICAL SOCKET WITH SWITCH SOCKET MODULAR BOX , ELECTRICAL LABOUR COST
Closing Date14 Feb 2025
Tender Amount₹ 7.4 Lac 
This is an estimated amount, exact amount may vary.
3841-3850 of 4131 archived Tenders