Tenders of Eastern Railway in Bihar

Pl No. 98057054, Scrap M.s. Consisting Of Ctr Bearing Cap Only.

Screw Size 6 Mm X 20 Mm

Pl No.98230013, Scrap Dom Cylinder Consisting Of Aluminum, Iron & Fibre Contents.

Scrap And Condemned Machine & Plants Consisting Of M&p No.(1) 10624-hz Band Saw (2) 10367a- Turrent Lathe. Conditions:-[1] As Is Where Is Basis.[2] Minimum Dismantle In 2 Parts. [3] All Electrical Fittings & Electrical Motor Are Included For Sale. [4] Before Bidding Bidders Are Advised To Inspect And Tally Every Details Of The Lot As Appearing In Catalogue Which Is Published In Ireps Portal With The Actual Material In Ground. No Complaints/claim By The Purchaser Will Be Entertained In This Regards After E-auction Sale. [5] Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.[6] Cutting/ Dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc Get Affected In Any Way.

Pl No. 98230013, Scrap Aluminium Consisting Of Water Tank With 5% Ferrous Attached.

Scrap Iron And Steel Cut Up Parts Of Condemned Bcnm1, Boxnm1, Boxnr & Bvzc Wagons No As Following: [1] Nr 30039006216 Bcnm1 [2]scr 10099761713 Boxnm1 [3]wr 25089501347 Boxnr [4]ser 25079671319 Boxnr [5]cr 85019650187 Bvzc [6]cr 10019602119 Boxnm1 [7]scr 10099560798 Boxnm1 [8]ser 25079516016 Boxnr [9]sr 10069660466 Boxnm1 [10] Scr 10099560675 Boxnr. Condition:-[1] Cutting Is Allowed For Loading Facilities Only. [2] Cutting Time Of Sold Wagons Of Jmpw/dhobighat Would Be 08.00 Hrs. To 16.00 Hrs. On Weekdays And 08.00 Hrs. To 12.00 Hrs. On Saturday. Purchaser, Their Labours Or Any Other Staff Will Not Be Allowed To Remain At Dhobighat Area Beyond The Scheduled Working Hour. The Purchaser May, However, Be Allowed To Keep Their Watchman To Guard Their Material. No Cutting Tools Will Be Allowed Inside Dhobighat Area On Sunday And Other Holidays. [3] To Be Sold Without All Available Excluded Fittings As Follows:- (i) For Bcnm1, Boxnm1, Boxnr : Bogie (except 22w & 22wm), Wheel Set With Ctrb, Brake Cylinder, Draft Gear, Coupler Body, Yoke & Yoke Pin, Distributer Valve, Yoke Supporting Plate, Yoke Pin Supporting Plate, All Sorts Of Bolster Springs, Slack Adjuster, Hand Brake Wheel, Knuckle, Anchor Plate With Safety Plate, Apm, Brake Beam Complete For Casnub Bogie, Equalising Lever With Bushes, Bogie Brake Push Rod.as Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024 (ii) For Bvzc : Wheel Set With Rb And Axle Box, Brake Cylinder, Distributer Valve, Draft Gear, Coupler Body, Yoke & Yoke Pin As Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024.(iii) Sl No. 06 & 08 Are Fitted With 22w(m) Casnub Bogie Which Are To Be Sold With Wagon.

Scrap Iron And Steel Cut Up Parts Of Condemned Boxnm1, Boxnr, Bobrm1 & Bvzc Wagons No As Following:- [1]scr 10099560897 Boxnm1 [2] Ser 25079560026 Boxnr [3]scr 10099660511 Boxnm1 [4]wr 85080151002 Bvzc [5]ecr 85100429876 Bvzc [6]er 72029860262 Bobrm1 [7]scr 10099663642 Boxnr [8] Er 10029613877 Boxnm1 [9] Sr 85060260199 Bvzc [10]scr 10099660467 Boxnm1 [11]scr 10099663673 Boxnm1 [12]scr 10099660771 Boxnm1 [13]ser 10079665505 Boxnm1. Condition:-[1] Cutting Is Allowed For Loading Facilities Only. [2] Cutting Time Of Sold Wagons Of Jmpw/dhobighat Would Be 08.00 Hrs. To 16.00 Hrs. On Weekdays And 08.00 Hrs. To 12.00 Hrs. On Saturday. Purchaser, Their Labours Or Any Other Staff Will Not Be Allowed To Remain At Dhobighat Area Beyond The Scheduled Working Hour. The Purchaser May, However, Be Allowed To Keep Their Watchman To Guard Their Material. No Cutting Tools Will Be Allowed Inside Dhobighat Area On Sunday And Other Holidays. [3] To Be Sold Without All Available Excluded Fittings As Follows:- (i) For Boxnr & Boxnm1 : Bogie (except 22w & 22wm), Wheel Set With Ctrb, Brake Cylinder, Draft Gear, Coupler Body, Yoke & Yoke Pin, Distributer Valve, Yoke Supporting Plate, Yoke Pin Supporting Plate, All Sorts Of Bolster Springs, Slack Adjuster, Hand Brake Wheel, Knuckle, Anchor Plate With Safety Plate, Apm, Brake Beam Complete For Casnub Bogie, Equalising Lever With Bushes, Bogie Brake Push Rod.as Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024 (ii) For Bobrm1 : Bogie (except 22w & 22wm), Wheel Set With Ctrb, Brake Cylinder, Draft Gear, Coupler Body, Yoke & Yoke Pin, Distributer Valve, Yoke Supporting Plate, Yoke Pin Supporting Plate, Dom Cylinder, Square Shaft With Bush, All Sorts Of Bolster Springs, Slack Adjuster, Hand Brake Wheel, Knuckle, Anchor Plate With Safety Plate, Lsd, Apm, Brake Beam Complete For Casnub Bogie, Equalising Lever With Bushes, Bogie Brake Push Rod.as Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024. (iii) For Bvzc : Wheel Set With Rb And Axle Box, Brake Cylinder, Distributer Valve, Draft Gear, Coupler Body, Yoke & Yoke Pin As Per List Of Excluded Fittings Of Wagon Letter No. Mc/300/pt-xx Kolkata Dated 10.04.2024

Scrap And Condemned Machine & Plants Consisting Of M&p No. 10210a -t.c. Milling. Conditions:-[1] As Is Where Is Basis.[2] Minimum Dismantle In 2 Parts [3] All Electrical Fittings &electrical Motor Are Included For Sale. [4] Before Bidding Bidders Are Advised To Inspect And Tally Every Details Of The Lot As Appearing In Catalogue Which Is Published In Ireps Portal With The Actual Material In Ground. No Complaints/claim By The Purchaser Will Be Entertained In This Regards After E-auction Sale. [5] Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.[6] Cutting/ Dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc Get Affected In Any Way.

Pl No.98057054, Scrap M.s. Consisting Of Elastomeric Pad And Metal Bounded Rubber Pad Big And Small, Snuber Pad, Side Bearer Rubber Pad Only.

Scrap And Condemned Machine & Plants Consisting Of M&p No. (1) 10608c- Dv Test Bench (2) 10623- Peeco Press. Conditions:-[1] As Is Where Is Basis.[2] Minimum Dismantle In 01 Parts [3] All Electrical Fittings & Electrical Motor Are Included For Sale. [4] Before Bidding Bidders Are Advised To Inspect And Tally Every Details Of The Lot As Appearing In Catalogue Which Is Published In Ireps Portal With The Actual Material In Ground. No Complaints/claim By The Purchaser Will Be Entertained In This Regards After E-auction Sale. [5] Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.[6] Cutting/ Dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc Get Affected In Any Way.