Bench Tenders

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: irs-0004 Or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include uprooting And Disposing Of All The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In benching Portion And Compaction Using Suitable Slope Vibratory Rollers/compactors Etc. To Achieve prescribed Mdd. Note: 1. Payment Of Cess Repairs Shall Be Based On The Quantities Worked Out From the Cross Sectional Calculations Only And Worked Out From The Initial Ground Levels Before Doing benching And Final Levels As Done For New Embankment. The Earth Work In Benching Portion Shall Not be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be Started Only After completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum Height of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: irs-0004 Or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include uprooting And Disposing Of All The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In benching Portion And Compaction Using Suitable Slope Vibratory Rollers/compactors Etc. To Achieve prescribed Mdd. Note: 1. Payment Of Cess Repairs Shall Be Based On The Quantities Worked Out From the Cross Sectional Calculations Only And Worked Out From The Initial Ground Levels Before Doing benching And Final Levels As Done For New Embankment. The Earth Work In Benching Portion Shall Not be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be Started Only After completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum Height of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Details: Description:- Cess Repair/widening Work As Per Rdso Specifications And Guidelines Rdso/2020/ge: irs-0004 Or Latest In Running Line With Suitable Soil To The Designed Profile The Work Shall Include uprooting And Disposing Of All The Vegetation, Benching At Every 30 Cm Vertical Height, Earthwork In benching Portion And Compaction Using Suitable Slope Vibratory Rollers/compactors Etc. To Achieve prescribed Mdd. Note: 1. Payment Of Cess Repairs Shall Be Based On The Quantities Worked Out From the Cross Sectional Calculations Only And Worked Out From The Initial Ground Levels Before Doing benching And Final Levels As Done For New Embankment. The Earth Work In Benching Portion Shall Not be Paid Extra As The Same Has Been Included In The Rate. 2. The Earth Work Shall Be Started Only After completing Of The Benching And Certified. 3. The Benching Work Shall Be Done For A Maximum Height of 1.50 M At Any Time Based On The Progress Of Earthwork Starting From Toe Of The Embankment.

Description: CATEGORY: Platform Swing - Square , Bolster Swing , Disc Swing , Tube Swing - With Cover , Trapeze Bar , Basic Rope Ladder , Zip line , Wall climber , Net climber , Bean Bag , Floor Protection Therapy Mat , Wall protection Mat , Massager , Texture Wall , Activity Board , Jungle Gym , Do nut Roll , Ball pool - detachable , Ball pool balls , Working Table , Ball pool Stairs , Trampoline with Hand Support frame , Weighted Cuffs - Pair , Thera band , Theraputty , Weighted softToys , Balance Board , Wobble Board , Scooter Board , Balance Beam , Barrel , Pathways , Therapy ball , Therapy ball - Spike , Therapy ball - Peanut , LED Chain , Blue LED , Floor Mat , Half Kneeler Support Bench , Wedge , Wedge Foldable , Bolster , Standing Frame small , Positioning Mirror , Adjustable Multipurpose bed table , Quadriceps table , Over head pully , Mirror , Basketball Net portable , Nirmal hand Exercise unit , Sanding Unit bilateral , Peg Board size, shape, color , Finger ladder , Lacing Frame , Exercise Table , Nut Bolt Frame , Commode with grab bars , crutches elbow and shoulder , Mirror 6x3 , ADL training kit

Description: Scrap Of Various Type Of Used And Condemned Hand Tools Like Screw Driver 6",8",12",18",star Head Screw Driver 8",10",14", Screw Driver Phillip Head Set ,ratchet 1/2" Sq Drive , Surplus Drill Chuck Three Jaw Light Duty Capacity 10mm With Key ,strap Cutter Model-cu-30 ,hacksaw Frame-12 , Sealant Applicator Gun, Drill Chuck-3/8"x24 Unf , Drill Chuck 1/2"x20 Unf , Drill Chuck 13mm , Torque Wrench Ratchet3/4 Square Drive Ratchet Type Torque Wrench Cap- 135-675nmetc , Pliers, Spanners, Wrench, Drill Socket, Dot Punch, Center Punch, Combination Plier, Chisels, Scissors, Vices,measuring Tapes, Die Set, Spoke Saw, Rachid ,try Square,torches, Hammer, Tessa, Foot Rule, Hexa Frame , Welding Electrode Holders,pad Locks, Bench Vice, T-max Tool And Other Misc Hand Tools Of Various Types ,make,sort & Sizes With Or Without Broken/unbroken, Damaged Etc (qty Shown In The Lot Is Approximate) Pl No-98090331

Description: CATEGORY: High Jump Landing Mat with cover , Obstacle clear jump , Swiss Ball , Discuss Throw , Shot Put , Javelin Throw , Hammer Throw , Measuring Tape Cycle Plastic Ys 100mtr , Measuring Tape 100mtr , Measuring Tape 50mtr , Measuring Tape 30mtr , Marking Cone 1Set 10 Cone , Speed Hurdils , Battile Rope , Loud Hailer , Take Off Board , Flooring Gym Mat rubber , Weighing Scale , Flat Gym Bench , Weight lifting Platform , Weight plates 2.5kg , Weight plates 20kg , Weight plates 25kg , Weight plates 7.5kg , Weight plates 5kg , Relay Baton , Starting Block , High Jump stand , High Jump Cross Bar , Pole Vault Cross bar , Toe Board , Wooden Plyometric Boxes , Starting Fire Gun , Steeple Chase Hurdle , Hammer throw safety cage net , Discus throw safety cage net , pole Vault pole. UCS sprint 4.60 mtrX150LBS , pole Vault pole. UCS sprint 4.30 mtrX140LBS , Thera gun , Arena Massage Chair

Description: CATEGORY: T HANDLE Part No.A1152 , SLIP JOINT PLIER Part No.451TI11226 , PLIERS CMBNTN INSULATED CUTTING-6 , WRENCH PIPE 600MM , WRENCH ADJSTBL 300MM , CHISEL FLAT 25MM 250MM , BIT SET TWSTDRL HSS 3-14MM 12NOS 1MM , HAMMER DBLFACDSLDG 1.8KG , FILE HAND TRNGLR SMTH 300MM , FILE HAND ROUND ROUGH 300MM , SCREWDRIVER STR 100MM , NOSE PLIER LONG Part No. 6V6164 , FILE HAND FLAT SMTH 300MM , SCREWDRIVER 300MM , TAP THRD CUTNG HSS GRND HND 3 By 8IN BSW , TAP SET THREADING 5 BY 8IN 11TPI 3 PCS , TAP THRD CUTNG HSS 3 BY 4IN BSW , PENCIL GRINDER 650w 240v 6mm 25000RPM , PUNCH SML 8IN , RATCHET HANDLE Part No.9392976 , SNAP RING PLIER Part No.J8039A , VISE BENCH AND PIPE APEX- 741 300MM , HAMMER CRSS PIN 0.45KG , FILE HAND HALF RND SMTH 300MM

Description: CATEGORY: Reception Table , public seating 3 seater , chair , Main Table Taylor Made , Side Unit Taylor Made , Back Unit Taylor Made , Display Media Unit , High Back Chair , the Visitor Chair Wooden Taylor Made , the Display Unit Taylor Made , the Consolate Unit Taylor Made , the Customised Mirror Cum Table Taylor Made , the Recliner Chair , the Center Table , the 3 Seater Sofa , the 1 Seater Sofa , the Corner Table , the Table , the High Back Chair , the Visitor Chair , the Back Unit , the 3 Seater Sofa Set , the 2 Seater Sofa Set , the Display Media Unit 2 , the Main Table , the High Back Executive Chair , the Visitor Chairs for Court Rooms , the Wooden Bench for Court Room Taylor Made , the Judges Table Customized Taylor Made , the Partition in front of JUD and CD , the Customised Desk with Glass top Taylor Made , the Customised Rac shelf Taylor Made , the CD Chair , the 1 Seater sofa , the Compactor , the Table for Judicial Record Room , the Customised Table for Photocopy Machine , the Chair , the Executive Table , Sofa Set Make Godrej Model Pisa Seat Foam , the 6 Seater Workstation , the 4 Seater Workstation , the 18 Seater Conference Table , the Mid Back Chair , the Circular Table

Details: Description:- Earthworkinfillinginembankment,guidebunds,aroundburiedtypeabutments, bridge Gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching includingadditionalearthworkonaccountofthis,whereverrequired,shallbepaidextraunder relevant Schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based on The Cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based on Initial Ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final levels As Per Prevailing Guidelines. Using Soil Class Sq2

Description: CATEGORY: OHMS LAW APPLICATION , RHEOSTAT 100 OHM , RHEOSTAT 150 OHM , METRE BRIDGE , ONE WAY KEY , TWO WAY KEY , JOCKEY , GALVANOMETER , MULTIMETER , VOLTMETER , MICRO AMMETER , OPTICAL BENCH WITH UPRIGHTS , EXTENSION BOARD , WIRE CUTTER , SPIRIT LEVEL , SCREW GAUGE , TRIANGULAR GLASS PRISMS , THIN CONVEX LENS , THIN CONCAVE LENS , PN JUNCTION INPUT OUTPUT CHARACTERISTICS INSTRUMENT , LABORATORY STAND , 3 D MODEL OF RNA , 3 D MODEL OF DNA , LH OF HONEY BEE , MODEL OF ANIMAL CELL , MODEL OF PLANT CELL , MODEL OF VIRUS , MODEL OF FLOWER , MODEL OF HUMAN OVARY , MODEL OF SKIN , MODEL OF HEART , M ODEL OF BRAIN , SET OF BODY JOINTS , MODEL OF NOSE , SET OF EIGHT BODY SYSTEM DIGESTIVE, EXCRETORY, CIRCULATORY,NERVOUSE,RESPIRATORY,MUSCULAR,MALE ENDOCRINE,FEMALE ENDOCRINE , PROJECTION MICROSCOPE , TRINOCULAR MICROSCOPE WITH USB CAMERA , APRON COAT , ETHANOL-2 LITRES , KM NO-4 500 GM , MOHARS SALT1 KG , CALCIUM CARBONATE 1KG , NH4CL AMMONIUM CHLORIDE 1KG , SULPHURIC ACID 5 LITRES , HYDROCHLORIC ACID -3 LITRES , CARBOXYLIC ACID- ACETIC ACID 1 LITRES , FORMIC ACID 1 LITRES , PHENUL ACID 1 LITRES , ACETONE ACID 1 LITRES , AMMONIUM CARBONATE 1 KG , PH PAPER , REAGENT , DISTILLED WATER 5 LITRE