Tenders of South Eastern Railway

Skirt Rubber Sheet: 1000mm Length X 2000mm Width X 30mm Thickness Specification As Per Attached Annexure.

Cleaning, Sanitation And Disinfection Service - Outcome Based - Healthcare; General Cleaning (sweep

Lot No.p.nfc-1.bin No-40.exmp.02.2024-25.17, Description- Scrap Copper Lump & Sheets (comprising Of Fire Bronze Pcs, Plate, Stays, Rivets, Stude, Rods, Pipe Etc.) Copper Wire Without Insulation. Copper Boring & Turning. Our Offer:- Scrap Copper Catenery,jumper & Dropper Wire Without Insulation. Bin No-40, Qty= 4562 Kgs. Loading Will Be Done By Purchaser's Own Arrangement.

Lot No.m.mms.exmp.d & G.12.24-25.07, Description- Mixed Ferrous Melting Scrap Amalgamating The Various Types Consisting Of Fresh Plate, Sheets Plate Cuttings And Shearing Of All Shapes And Sizes. Structural Sections, Scrap Low Phosphorous Steel, Iron Pipes, Bar Fittings, Buffer Cases And Plungers (other Than Cast Steel) Sleeves And Spindles With Heads, Screw Couplings, Tie Bars, All Types Of Equalising Beams & Centralize Beams, Fish Plate Other Than Cast Steel), Wire & Wire Rope, All Types Of Sleeper, All Types Of Bars And Rods, Junk Kutchra, Steel Fabrication, Nut Bolt, Grease Seal Etc. (our Offer): Mixed Ferrous Melting Scrap Amalgamating The Various Type Consisting Of Fresh Plate, Sheets Plate Cuttings And Shearing Of All Shapes And Sizes. Structural Sections, Lever, Scrap Low Phosphorous Steel, Iron Pipes, Bar Fittings, Flap Door, Shaft, Brake Cylinder, Buffer Cases And Plungers Other Than Cast Steel Sleeves And Spindles With Heads, Screw Couplings, Tie Bars, All Types Of Centralize Beams, Fish Plate Other Than Cast Steel, Wire & Wire Rope, All Types Of Bars And Rods, Junk Kutchra, Steel Fabrication, Nut Bolt, Grease Seal Etc., As In The Lot. Materials Lying At Three Places [two Places At ''d-1" Sector Both Side Of Line No.-3] And [one Place At "g-1" Sector] (nf Or Other Class Items If Available Excluded From This Lot] [loading Will Be Done By Purchaser's Own Arrangement].

Lot No.y.pt-1.exemp.j-1.01.25.10, Description- Scrap Comprising Of Low Phospohrous Steel Tools, Steel Implements & Equipments Of All Sizes, Machine & Machine Parts With Or Without Little Nf Attachment. [our Offer:- Scrap & Cond. Shovel, Phowrah, Crank Shaft, Beater, Belcha, Pick Axe, Bucket, Common Pipe Bracket With Control Reservoir & Other Misc. Tools Items As Available In The Lot.] [loading Will Be Done By Purchaser's Own Arrangement].

CATEGORY: XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2)

Cabergoline 0.5 Mg Tab

Lot No.ws/s-yd/54/12/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Cr 10019760031 Boxnm1 (nlb) 2) Se 30079370957 Bcnam1 (nlb) 3) Se 10079561135 Boxnm1 (nlb) 4) Se 12079560064 Boxnhsm1 (nlb) 5) Se 10079670363 Boxnr (nlb) Steel Body 6) Sc 10099662676 Boxnm1 (nlb) 7) Sc 25099638460 Boxnr (nlb) Steel Body 8) Sc 10099636097 Boxnm1 (nlb) 9) Se 10079660449 Boxnel (nlb) 10) Se 30079371695 Bcnam1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 18 Nos. Nlb Trolleys Against Srl. No. 01 To 09. Ii) Wagon Are To Be Sold With 02 Nos. Wm Trolleys Against Srl No.10. Iii) All Wagons To Be Sold Without 40 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb (2): Special Condition For Rolling Stock-a) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At Sse/44 & 38/nws The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour, Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Present Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3). The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

Lot No.ws/ayma/65/02/24-25/bg/cond./4w/8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond/4w/8w/wgn. Without Contents If Any. 1) Se 10079461121 Boxnm1 (nlb) 2) Se 99079306892 Brn (nlb) 3) Se 10079513134 Boxnm1 (nlb) 4) Sr 30069260084 Bcnm1 (nlb) 5) Se 99079102975 Brn (nlb) 6) Sr 25069660071 Boxnr (nlb) Steel Body 7) Sc 99099270562 Brn (nlb) 8) Sr 30068861152 Bcnm1 (wm) 9) Sc 99099272191 Brn (wm) 10) Cr 85019660193 Bvzc Nb: (1): I) Wagons Are To Be Sold Without 14 Nos. Nlb Trolleys Against Srl. No. 01 To 07. Ii) Wagon To Be Sold With 04 Nos. Wm Trolley Against Srl No. 08 & 09. Iii) Wagon Serial No. 01 To 09 To Be Sold Without 36 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve,sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower Etc And Other Excluded Fitting As Per Latest Excluded Fitting List* Iv) Wagon Serial No. 10 To Be Sold Without 02 Nos. R/b Wheel Sets , Axle Box Cover Plate , Bg Spring And Brake Gear With Lever Pull Rod Etc . As Per Latest Fitting List . *(it Contains No Trolley ) V) Ng Rail Fitted With 03 Wagons Are To Be Treated As Excluded Fitting. * *excluded Fittings List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Lot No.m.cs-1.exmp.d & I.01.24-25.06, Description- Scrap Steel Casting (drag Boxes Centers Castings Streatcher Casting, Pivot Cbc Components Knuckles, Axle Boxes & Buffer Cases, Rubbing Blocks Etc). Our Offer :- Pinions, Thrower, Racers, Creddle, Adopter, Casnub Trolley, Center Pivot For Electric Loco, End Shield, Cbc Components, And Its Fittings Along With Draft Gear, Yoke, Wedge Block, Knuckle, Lock, Clevis, Coupler Body And Other Misc Cs-1 Items As In The Lot. Materials Lying In Two Places [one Place At "d-1" Sector] & [one Place At "i-8" Sector]. Cutting May Be Allowed Only For Casnub Trolley. Loading Will Be Done By Purchaser's Own Arrangement.