Tenders of South Eastern Railway

Lot No.m/stb/adme/nmp/11/24-25/25, Description- Scrap Steel Turning Boring (stb). Materials To Be Sold "as Is Where Is Basis". Loading Will Be Commance From West End Side To East End Side. Special Conditions Vide Lot No: M/stb/adme/nmp/11/24-25/25, 1. The Bidders Must Inspect The Location Of Steel Turning And Boring As Mentioned In Lot Details And Satisfy Themselves On All Points Before Submitting Their Bids. The Bidders Are Advised To Point Out Discrepancy, If Any, Well Before Start Of Bidding Process. Once The Bid Is Submitted, No Claims In Respect Of Quality/quantity, Location, Description And Delivery Of Materials, Special Request Etc. Shall Be Entertained. 2. Delivery Should Commence From West End Side And East End Side, Pick And Choosing Will Not Be Allowed. Delivery Witnessing Official Will Ensure The Same. 3. Safety Of Purchaser Staff And Railway Property: Purchaser Will Arrange To Provide Safety Gears To His Engaged Worker And Abide By All Relevant Regulations. Any Injury /death / Accident Caused During Delivery Of Scrap Will Be On Purchaser's Account. No Railway Property Shall Be Damaged In Course Of Delivery. If Any Damage Is Sustained To Railway Property, Proportionate Loss Value Will Be Recovered From Purchaser. 4. Weighment Of Truck: The Empty Truck Will Be Weighed On Calibrated Working Electronic Weighbridge Only At Amm/s-yard /kgp In Presence Of Delivery Witnessing Official. The Nominal Payment On Private Weighbridge Will Be Paid By Purchaser. After Loading Of Steel Turning And Boring, Final Weighment Will Be Taken On The Same Weighbridge In Presence Of Delivery Witnessing Official. 5. At The Time Of Loading The Stock Holder Concerned Reserves Himself The Right To Determine How Near To A Lot Purchaser's Vehicles May Be Parked For The Purpose Of Loading; Purchaser Must Ascertain This At The Time Of Inspection Of Materials. 6. The Purchaser Will Solely Be Responsible For The Payment Of Any Compensation For Injury Or Death Caused To The Labor Employed By Him For Cutting/loading/removal Etc. Of The Purchases In Accordance With The Govt. Laws. The Railway Administration Will Have Nothing To Do In This Concern. The Contractor Shall Be Liable For All Material Or Works Spoiled Or Damaged By His Men And He Shall Pay The Cost Of Any Damage Done To The Property Of The Railway Administration While Performing This Contract And He Shall Personally Be Responsible For Any Unsatisfactory Work Or Any Detention Caused To The Railway Works Or To Train, Through The Negligence Of His Men For Which He Will Accept Any Penalty That May Be Inflicted By The Railway Administration. 7. Delivery Program And Witnessing Of Delivery: Delivery Program And Co-ordination For Delivery Witnessing Official Will Be Made By Stock Holder. The Delivery Of Stb Will Be Witnessed By Sr.isa/sv, Pc/rpf (preferably Of Inspector Rank), Stock Holder(s). 8. The Delivery Of The Materials Will Be Given On Weighment Basis. 9. No Sale Delivery Will Be Given On Gazetted Holidays Or Other Holidays Observed By The Depot/division/workshop. [continued In Special Conditions...]

(1)xerox Machine Make- Ricoh. Qty- 02 Nos. I.e. 60 Kg [electronic Waste]. (2) Cpu Make- Various Brands. Qty- 10 Nos. I.e. 20 Kg [electronic Waste]. (3) Monitor (lcd). Qty- 11 Nos. I.e. 16.50 Kg [electronic Waste]. (4) Keyboard & Mouse. Qty- 10 Nos. I.e. 4.00 Kg [electronic Waste]. Total Qty- 33 Nos. I.e. 100.50 Kg [electronic Waste]. Us And Scrap.

Lot No.ws/s-yd/44/11/24-25/bg/cond./4w/8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./4w/8w/wgn. Without Contents If Any. 1) Er 10029660086 Boxnm1 (nlb) 2) Se 25079560880 Boxnr (nlb) Steel Body 3) Sc 25099560686 Boxnr (nlb) Steel Body 4) Se 10079662191 Boxnr (nlb) Steel Body 5) Nr 25039660230 Boxnr (nlb) Steel Body 6) Se 10079670882 Boxnm1 (wm) 7) Sc 85099560154 Bvzc. Nb: (1): I) Wagons Are To Be Sold Without 10 Nos. Nlb Trolleys Against Srl. No. 01 To 05. Ii) Wagon Are To Be Sold With 02 Nos Wm Trolleys Against Srl No.06. Iii) All Wagons To Be Sold Without 24 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List **excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023 , Iv) Wagon Serial No. 07 To Be Sold Without 02 Nos. R/b Wheel Sets , Axle Box Cover Plate , Bg Spring And Brake Gear With Lever Pull Rod Etc . As Per Latest Fitting List . * (it Contains No Trolley) Nb(2): Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Nlb Trolleys Are To Be Handed Over By The Purchaser At Sse/44 & 38/nws The Nominated Location Suggested By The Concerned Sse For Which They Have To Arrange Labour, Tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Present Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3). The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb: (4) Delivery Will Be Given In Numbers.

U/s & Scrap Psc 60 Kg

(1)condemn Maruti Suzuki Car Model Sx4, Vehicle No- Jh01be-3880, Make- Maruti Suzuki, Engine No- M16ah2049018, Chassis No.- Ma3efjc1s00219574, Qty- 01 Nos. Us And Scrap.

(1)cpu. Qty- 04 Nos. I.e. 36.00 Kg [electronic Waste]. (2) Printer (dot Matrix). Qty- 07 Nos. I.e. 42.00 Kg [electronic Waste]. (3) Printer (line Matrix). Qty- 01 No. I.e. 75.00 Kg [electronic Waste]. (4) Monitor (lcd). Qty- 04 Nos. I.e. 12.00 Kg [electronic Waste]. (5) Desktop (all-in-one). Qty- 04 Nos. I.e. 26.00 Kg [electronic Waste]. (6) Printer (inkjet). Qty- 02 Nos. I.e. 4.00 Kg [electronic Waste]. (7) Scanner (deskjet). Qty- 02 Nos. I.e. 17.00 Kg [electronic Waste]. (8) Ups (1000 Va). Qty- 02 Nos. I.e. 18.00 Kg [electronic Waste]. (9) Ups (650 Va). Qty- 01 No. I.e. 5.00 Kg [electronic Waste]. (10) 42 Ah Smf Batteries. Qty- 13 Nos. I.e. 260.00 Kg [battery]. (11) Hdd (external). Qty- 01 No. I.e. 0.50 Kg [electronic Waste]. (12) Voltage Stabilizer. Qty- 01 No. I.e. 15.00 Kg [electronic Waste]. (13) Cpu Iron Stands. Qty- 06 Nos. I.e. 6.00 Kg [ferrous]. Total Qty- 516.500 Kg [electronic Waste & Battery]. Us And Scrap.

U/s Psc Sleeper 60kg

Lot No.y.mms.exmp.w-6.11.24.114, Description- Mixed Ferrous Melting Scrap Amalgamating The Various Type Consisting Of Scrap Classes Like- Fresh Plate & Sheets Plate Cuttings And Shearing Of All Shapes And Sizes Structural Sections. Scrap Low Phosphorous Steel .iron Pipes .bar Fittings .buffer Cases And Plungers (other Than Cast Steel) Sleeves And Spindles With Heads .tie Bars .all Types Of Equilising Beams & Centralize Beams , Wire And Fish Plate Other Than Cast Steel.wire & Wire Rope, All Types Of Chains, All Types Of Sleeper, Shock Absorber, All Types Of Bars & Rods. Junk Kutchra, Spring Wire , Screw Couplings, Steel Fabrication And Misc, Nut Bolt,grease Seal Etc. Our Offer -grease Seal And Locking Plate As In The Lot [loading Will Be Done By Purchaser's Own Arrangement]

U/s & Scrap Rail 52kg. (1mtr And Above Length)

As Per Tms Lot Details Given.