Tenders of Nhpc Limited

Tenders of Nhpc Limited

NHPC Limited - NHPC Tender

Auction
Scraps
MSTC
Lower Dibang Valley, Arunachal Pradesh
Auction Sale Of Lot No : 1 Lot Name : Loader Cum Excavator ,
Closing Soon18 Nov 2024
Tender AmountRefer Documents 

NHPC Limited - NHPC Tender

Services
Machinery and Tools...+1Electrical and Electronics
GEM
Chamba Hp, Himachal Pradesh
CATEGORY: Operation And Maintenance Of Other Machines And Plants - Hiring of services of Engineer from OEM Anupam Industries Ltd Gujrat for Servicing of EOT cranes installed at Power House Chamera III Power Station
Closing Date26 Nov 2024
Tender Amount₹ 7.8 Lac 

NHPC Limited - NHDC Tender

Goods
GEM
Kathua, Jammu & Kashmir
CATEGORY: LUGS 25MM2 , TINNED COPPER LUG 35 SQ MM , LUGS COPPER 50 SQ.MM , CU RING TYPE LUGS 70MM2 , GLASS FUSE 1AMP 250V , GLASS FUSE 2AMP 250V , GLASS FUSE 4A , GLASS FUSE 10A , HEAT SHRINK TUBING SLEEVE SIZE 8MM , HEAT SHRINK TUBING SLEEVE SIZE 16MM , FEXIBLE HEAT SHRINK SLEEVE PVC TUBING SIZE 25 POINT 4MM , FIBER INSULATION SLEEVE IN PIPE SHAPE 12 MM ID , FIBER INSULATION SLEEVE IN PIPE SHAPE 16 MM ID , PTFE WIRE SIZE 1 SQMM , IRON,SOLDERING 25W , Soldering Iron 100Watt , SOLDER WIRE , SOLDRING FLUX PASTE , SOLDERING STATION DIGITAL CONTROL VARIABLE TEMPERATURE 200 TO 400 DEG oC , INSULATED ELECTRICIAN SCREW DRIVER M4, TIP SIZE 0.6X4.0 MM, BLADE LENGTH 150MM , NSULATED ELECTRICIAN SCREW DRIVER M8, TIP SIZE 1.2X8.0 MM, BLADE LENGTH 200MM , LONG NOSE PLIER 215 MM LENGTH , HACKSAW FRAME 2BB 12 INCH , POWER HACKSAW BLADE , EMERY CLOTH ROUGH 50M , EMERY CLOTH FINE, 50M , HAMMER 2KG WIH HANDLE , MALLET HAMMER SIZE 40 MM , HIGH DIELECTRIC RED INSULATING VARNISH-500ML CAN , INSULATED RED GEL VARNISH SPRAY 500ML FOR CLASS F INSULATION , HARDNER FOR RED ANTI - TRACKING PAINT , Polyester Winding Thread Thickness 5MM NYLON THREAD 50 M ROLL , LIGHT ORANGE ENAMEL PAINT , LIGHT GREY PAINT , ENAMEL PAINT SMOKE GREY , SYNTHETIC ENAMEL PAINT PO RED , ENAMEL PAINT YELLOW , ENAMEL PAINT BLUE , SYNTHETIC ENAMEL PAINT WHITE , BLACK PAINT , GREEN PAINT , RED OXIDE PRIMER PAINT , THINNER FOR ENAMEL PAINT 5 LTR PACK , HOLDITE GASKET SEALING COMPOUND 500 GM PACK, , SILICONE TUBE , PAINTING BRUSH 2 INCH , PAINT BRUSH 4 INCH , BRAIDED COPPER WIRE ROPE 25 SQ MM , CAT6A 23AWG UTP CABLE 305M , Slide wrench 6 Inch , Slide wrench 8 Inch , Slide wrench 12 Inch , CRIMPING TOOLS , TUBULAR SPANNER SET , Spider crimping tool Capacity 0.5 mm2 to 6 mm2 , Phenolic Textolite washer sample based , UMBRELLA , DANGRI , RAIN SUIT THREE PIECE PANT,SHIRT AND CAP
Closing Soon18 Nov 2024
Tender AmountRefer Documents 

NHPC Limited - NHPC Tender

Services
GEM
Corrigendum : Tender Amount Updated
Chamba Hp, Himachal Pradesh
CATEGORY: Calibration Services - As per list of items in ATC; as per SCC; as per SCC; Buyer premises (onsite)
Closing Date28 Nov 2024
Tender Amount₹ 1 Lac 

NHPC Limited - NHPC Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Darjeeling, West Bengal
CATEGORY: CONTROL TRANSFORMER 1KVA , MOTOR PROTECTION CUIRCUIT BREAKER, RANGE- 51 -70A , BREAKER HANDLE WITH KNOB, SIEMENS 3VT SERIES , PANEL DOOR LOCK FOR POWER PACK , ETHRNET SWITCH 5-PORT UNMANAGED, PORTS- 5 UNMANGED TYPE AUX. SUPPLY- 24VDC , SMPS DIN RAIL MOUNTED 24V DC 10A, OUTPUT- 24V DC, 10A DIN RAIL MOUNTED TYPE , STAR DELTA TIMER, 0 -60 SEC , PANEL FAN, 220V AC, SIZE 6 Inch , MCB 2.0 AMP. SINGLE POLE , MCB 4 A SINGLE POLE , SINGLE POLE MCB 6 AMP , MCB 4 A DOUBLE POLE , DC MCB DOUBLE POLE 220 V DC 06 AMP , TRIPPLE POLE MCB 4A, C04 , MCB TRIPPLE POLE, C CURVE, 6AMP , RELAY 8-PIN WITH BASE, 8-PIN 24V DC WITH BASE , SPACE HEATER, RATING-500W 230V AC , PRESSURE GAUGE, ANALOG TYPE, RANGE- 0-500KGF per SQ. CM , TANK OIL GAUGE, TANK MOUNTED DIRECT MEASURING , DIRECTIONAL SOLENOID VALVE, OPERATING PRESSURE- 315 KGF per SQ. CM COIL VOLTAGE-24V DC , GATE POSITION SENSOR FOR RADIAL GATE, E1-TYPE RANGE 0- 360 Degree, ANALOG OUTPUT 4 - 20 MA , INDICATION LIGHT - BLUE, INDICATION LAMP 22.5 MM 220V AC BLUE , DIFFERENTIAL PRESSURE TRANSMITTER, TWO WIRE 4 -20 MA DC OUTPUT WITH HART , LEVEL TRANSMITTER ACCURACY 5-10 MM , GATE POSITION INDICATOR 5 DIGIT 0.56 Inch DISPLAY 21 , VOLTMETER 0- 500V - ANALOG , PUSH BUTTON RED WITH NC ADD ON , AMMETER, 0 -250A ANALOG , INDICATION LIGHT - RED, INDICATION LAMP 22.5MM 220VAC RED , INDICATION LIGHT - YELLOW, INDICATION LAMP 22.5MM 220V AC YELLOW , INDICATION LIGHT - GREEN, INDICATION LAMP 22.5MM 220V AC GREEN , JUMBO DISPLAY SIZE 6.5 Inch USB PORTS 2.0 X 1, 3.0 X 1 , PUSH BUTTON YELLOW WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON BLUE WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON GREEN WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON BLACK WITH NO ADD ON, SIZE 22.5 MM , EMERGENCY PUSH BUTTON, SIZE 22.5 MM , PHASE PREVENTER RELAY SYSTEM AC MODE AUTO , UTP CABLE CAT-5e , CABLE 1.5 SQMM 4C FLEXIBLE 100M BUNDLE , 1024 TAGS and DDLS OF SCADA SYSTEM , CONTROL TERMINAL BLOCK, 2.5SQ.MM , Service Engineer charges , Traveling Charges , Freight Charges
Closing Soon18 Nov 2024
Tender Amount₹ 37.2 Lac 

NHPC Limited - NHDC Tender

Services
Electrical and Electronics
GEM
Reasi, Jammu & Kashmir
Annual Maintenance Service - Photocopier Machine - Photocopier Machines ( Monochrome , Laser , Sep
Closing Date2 Dec 2024
Tender Amount₹ 1.7 Lac 

NHPC Limited - NHPC Tender

Services
Hiring of Vehicles
GEM
Lower Dibang Valley, Arunachal Pradesh
CATEGORY: Monthly Basis Cab and Taxi Hiring Service - Without Fuel - SUV; Mahindra Bolero; AS PER ATC; AS PER ATC; A/C; AS PER ATC
Closing Date5 Dec 2024
Tender Amount₹ 37.8 Lac 

NHPC Limited - NHDC Tender

Services
GEM
Dhemaji, Assam
Purchase Of Services For Calibration Of Laboratory Testing Instruments / Equipment Of Quality Assur
Closing Date29 Nov 2024
Tender AmountRefer Documents 

NHPC Limited - NHDC Tender

Goods
Energy, Oil and Gas
GEM
Corrigendum : Closing Date Modified
Faridabad, Haryana
CATEGORY: Supply of PNG Based Genset of Capacity 2000 KWe @ 415V as per technical specification& scope of work , Installation, testing and commissioning of PNG Based Genset of Capacity 2000 KWe @ 415V at site , Supply of PNG Based Genset of Capacity 1000 KWe @ 415V as per technical specification& scope of work , Installation, testing and commissioning of PNG Based Genset of Capacity 1000 KWe @ 415V at site
Closing Soon18 Nov 2024
Tender Amount₹ 9.6 Cr 

NHPC Limited - NHPC Tender

Works
Electrical Generators And Transformers...+1Electrical and Electronics
Eprocure
Corrigendum : Closing Date Modified
Champawat, Uttarakhand
Supply, Retrofitting, Testing And Commissioning Of Transformer Protection Numerical Relay At Nhpc Tanakpur Power Station
Closing Date27 Nov 2024
Tender AmountRefer Documents 
141-150 of 191 active Tenders