Tenders of Labour Resources Department

CATEGORY: DIGITAL IC TRAINER (Q3) , CRO DUAL TRACE (Q3)

Power Generator - Dg Set (up To 900 Kva)

Engagement Of An Agency For Conducting A Tracer Study For Technical Vocational Education And Training (tvet) Employment Outcomes Of Graduates From Industrial Training Institutes (itis) In Bihar.

To Implement Employment Linked Domain Skill Development Program Under Minority Welfare Department, Govt. Of Bihar Under The Overall Framework Of Bihar Skill Development Mission. training Partners Those Have Placement Opportunities Available Through Verifiable Placement Tie-ups Can Only Apply Under This Rfp.

Request For Proposal From Chartered Accountant Firms For Working As Financial Management And Accounting Support Consultant

BOQ ITEMS: Steel Rule with metric & British graduation, Try Square., Caliper hermaphrodite spring type, Divider spring type, Scriber, Centre Punch, Screw driver, Chisel cold flat, Hammer ball peen with handle, Hammer ball peen with handle., File flat - second cut, File half round second cut, Hacksaw frame fixed type, Dot punch, Straight edge steel, Spirit Level metal Type - 2, Stud Extractor EZY - out, Micrometer outside., Micrometer inside with extension rods., Vernier bevel protractor Blade with Acute Angle Attachment, Screw pitch gauge Metric, Wire gauge, metric standard., Surface plate C.I/Granite with Stand and Cover, Marking table (Mild steel), Universal scribing block., V-Block pair with clamps, Angle plate, Punch letter set., Punch number set., Portable hand drill (Electric), Drill twist Taper shank, File triangular smooth, File round second cut, Feeler gauge, File triangular second cut., File flat second cut safe edge., File Swiss type needle, File card., Oil Can, Pliers combination insulated, Wooden handle forged Soldering Iron copper bit., Blow Lamp, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Spanner- Double Ended, Interchangeable ratchet socket set, Double Ended tubular Box spanner set with Tommy bar., Glass magnifying, Clamp toolmaker, Hand Reamer set (Taper pin straight flute), Machine Reamer parallel (Helical flute), Scraper flat, Scraper triangular, Scraper half round, Chisel cold crosscut& diamond point., Chisel cold round nose, Drill chuck with key, Pipe wrench, Pipe vice, Adjustable pipe die set BSP, Wheel dresser (One for 4 units) Star/Dresser with Holder, Machine vice - Swivel Base, Machine vice - Swivel Base, Sleeve drill Morse, Lockers with 8 drawers (standard size)., Machine vice., Wing compass., Hand hammer with handle., Torque wrench (Standard/Ratchet type), Power tools for fastening, Different Profile gauges (Plate type) - For demonstration, Knurling tool (Diamond, straight & Diagonal), Indexable boring bar with inserts, Temperature gauge, Dowel pin (straight), Standard Tap screws, Lapping plate, Medium carbon Heat treated alloy steel Metric Studs and bolts along with nuts (for display) of standard length (May be manufactured in-house), Caps screws, Drill gauges, Cast Iron Globe Valve (Flanged type), C.I. Sluice / Gate valve (flanged type), Stop cock, M.S. Pipe, G.I. Pipe, Slip-on Forged steel Flange, Bolt & Nut with washer (May be manufactured in-house), Pipe threading die with handle, Jigs & Fixture (sample)-For demonstration (May be manufactured in-house), Pulleys (for V-belt or Flat belt), Steel keys (May be manufactured in- house), Damaged old spur gear, V-belt and Flat belt, Packing gasket, Washer, clutch, keys, jib, cotter &circlip, Hollow punch, Drill Drift (May be manufactured in- house), Lifting sling, Bearing extractor, Pulley extractor, Trammel, Pocker, Prick punch, Mallet., Aviation Snips straight Cut, Flat headed hammers with handle., Planishing hammer., Stake hatchet with Leg., Stake grooving., Slip Gauge as Johnson metric set., Gauge snap Go and Not Go, Gauge plug, Gauge telescopic set., Dial test indicator on stand, Sine bar, Dial Vernier caliper. (Universal type), Screw thread micrometer with interchangeable. Pitch anvils for checking metric threads 60., Digital vernier caliper., Digital Micrometer outside., Comparators Gauge - Dial Indication with Stand and Bracket., Engineers try square knife edge, Surface roughness comparison plates, Digital Vernier caliper, Vernier Bevel protector, Carbide Wear Block., Lathe tools H.S.S. tipped set., Lathe tools bit., Lathe tools bit., Arm strong type tool bit holder., Arm strong type tool bit holder., Arm strong type tool bit holder., Stilson wrenches, Pipe bender machine spool type with stand manually operated., Adjustable pipe chain tonge to take pipes, Adjustable spanner., Compressor unit, Pneumatic Trainer Kit, each consisting of the following matching components and accessories, II. Double acting cylinder, III. 3/2-way valve, IV. 3/2-way valve, V. One-way flow control valve, VI. 5/2-way valve, VII. 5/2-way valve, VIII. 5/2-way pneumatic actuated valve, IX. 3/2-way roller lever valve, X. Shuttle valve (OR), XI. Two-pressure valve (AND), XIII. Manifold with self-closing, XIV. Pushbutton station for electrical signal input, XV. Relay station, XVI. 3/2-way single solenoid valve, XVII. 5/2-way single solenoid valve, XVIII. 5/2-way double solenoid valve, XIX. Power supply unit,, XX. Profile plate, Anodised Aluminium, Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide, Carrier for mounting components, such as PB & relay boxes., Hydraulic Trainer Kit, each consisting of the following matching components and accessories, I. Hydraulic Power pack, II. Pressure relief valve, III. Drip tray, steel, IV. Pressure Gauge, V. Four-Way distributor, VI. Double acting hydraulic cylinder, VII. Suitable Weight, VIII. Mounting kit for weight, IX. 3/2-way directional control valve, XI. 4/3-way directional control valve, XII. Non-return valve., XIII. Pilot-operated check valve, XIV. One-way flow control valve, XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.)., XVI. Profile plate,, Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide, Cut-section models for hydraulic components

CATEGORY: Online UPS , Computer UPS with dual battery , Xerox machine , Split AC , Battery Charger

CATEGORY: CAMERA , MICROPHONE VOICE SYSTEM FOR LECTURE CLASS ACTIVITIES , ASSESMENT AND TEST TOOLS FOR DAY TO DAY ONLNE TEST ASSESMENT , flipchart with marker , supporting software application for projecting audio video recording , READING RESOURCES , STUDY MATERIAL , PROJECTOR WITH SCREEN , FACULTY LAPTOP WITH LATEST CONFIGUARTION , FOR IT LAB SESSION , Computer Chair Adequate seating arrangement in full half circle format , Computer Table

CATEGORY: interactive panels and accessories (Q2)

CATEGORY: Instructor Table , Instructor Chair , Podium , Biometric , White Board , Laptop