Water Proofing Tenders

Details: Austenitic Steel Coil 1.25x1250mm., As Per Drawing: Rdso Spec. No. C-k201, Gra De X5crni1810 (304) Table 1&2, Heat Treatment Condition 2b As Per Table-5., Packing Instruct Ion: Stainless Steel Sheets, Coils And Plates:- (a) Stainless Steel (austenitic & Ferritic St Eel) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Nor Mal Handling Hazard During Transit With The Following Provision As The Barest Minimu M: I) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Leng Th. Ii) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii) Outer & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv) Side Of The Coil Should Be Covered With Card B Oard Sheet. V) After This Whole Coil Should Be Wrapped With Biodegradeable Plastic Sh Eet Of Suitable Thickness. Vi) The Inner Edge Of The Coil Should Be Protected By Gi Ring F Ollowed By Another Iron Ring. Vii) Outer Edge Of The Coil Should Be Wrapped With Gi Rin G. Viii) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix) Whole Coil Shoul D Be Mounted On Wooden Blocks For Easy Lifting/stacking. X) The Sheets In Coil Form Fo R Thickness 2mm And Above Shall Have: Inner Dia Of Coil 450-800mm Outer Dia Of Coil 100 0-1300mm Weight Of Coil 2.4 - 10 Tonnes Xi) The Sheets In Coil Form For Thickness Below 2 Mm Shall Have: Inner Dia Of Coil 450-650mm Outer Dia Of Coil 1000-1300mm Weight Of Coil 5.0 - 10 Tonnes. (b) Stainless Steel (austenitic & Ferritic Steel Plates/sheets) I) The Sheet S/plates Shall Be Supplied In Bundles Of Optimum Weight: 2mt+/-10% & Each Sheet/plate S Hall Be Seprated With A Layer Of Water Proof Paper, After This The Whole Bundle Shoul D Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic She Et Of Suitable Thickness. A Metal Protection In Edges Should Also Be Provided. Ii) All Bu Ndles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid (wooden Packing Under Neath) To Facilitate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. , Proction Procedure: Covered In Pi [ Warranty Period: 3 0 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

Details: CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech,ACC,JK or Dalmiya under Job No 2502 MMG BKR as per store list , Stone Boulder 9 inch to 12 inch , Coarse aggregate 40-63 mm graded , Coarse sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40 mm graded , Water Proofing compound confirming to IS 2645-2003 Make-Pidilite,Dr fixit, Fevicol , PBS Roll 20m Long , Width of 0.9 Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Synthetic Paint enamelled OG confirming to IS 5-2004 Make- Berger,Asian,Nerolac , Synthetic Paint enamelled Brown confirming to IS 5-2004 Make-Berger,Asian,Nerolac , Anti corrosive red oxide zinc chromate primer confirming to IS 5- 2004 Make-Berger,Asian,Nerolac , Loop Holes 1000 x 300 mm Make-TATA,SAIL,JSW , Ventilator Steel 300 x450 mm wiil be fabricated using ISA 35x35x5mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make- TATA, SAIL,JSW as per store list att , MS binding wire TATA, SAIL,JSW , ISMB hot rolled MS 125, 4000mm long Make- TATA,SAIL,JSW , ISMB hot rolled MS 125, 1200mm long Make-TATA, SAIL,JSW , SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA,SAIL,JSW , Prefab mild steel door of size 900x1700, outer frame made out of ISA 40x40x6mm and door shutter frmae of ISA 35x35x5mm and all stiffner ISA 30x30x3mm. Steel shall conform to IS-800 Make- TATA,SAIL,JSW , HDPE sand bag OG colour of size 34 inch x 14 inch , Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 Part I 1982 Make-TATA,SAIL,JSW , Preferb folding double sleeping sleeping bunks made of MS columns 65x65x6 mm and ms plate from made of ISA 40x40x6mm, hold fast Make-Tata,Sail,Jsw as per store list attached , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden Scantling various sizes , Nails various size , Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side , Air termination single pointed aluminium rod 12 mm dia and 300 mm long , GI pipe 40 mm dia light grade Make-Jindal,Tata,Kalinga , GI pipe 20 mm dia light grade Make-Jindal,Tata, Kalinga , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make-Presto,Polycab,Finolex , Testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw , Aluminium strips 25 x 3.0 mm , Nut and bolts 6 mm dia 30mm long with check nut and washer , Charcoal , Salt Normal , CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long Pipe Make-Jindal,Tata,Kalinga , Galvanized Iron strip 32 x 6 mm

Details: BOQ ITEMS: SPADE IRON BELCHA D- GRIP HANDLE ROUND NOSE SHOVEL GENERAL PURPOSE TATA OR SIMILAR, PICK AXE PICK AXE (1800GMS 34 INCH(850MM) WITH WOODEN HANDLE, SLEDGE HAMMER 3 KG HEAD MATERIAL- ALLOY STEEL WITH WOODEN HANDLE OF 22 INCH LENGTH, GROUPING MEASUREMENT RING5 INTERCONNECTED RINGS EACH OF 5MM THICK MS BARDIA OF OUTERMOST RING 12INCH DIAMETER OF INNERMOST RING4INCH EACH RING CONNECTED WITH A GAP OF ONE INCH AT 4 SUITABLE PLACES WITH ONE ANOTHERHANDLE OF SAME MATERIAL AT OUTER RING, GROUPING MEASURING SQUARE5 INTERCONNECTED SQUARES EACH OF 5MM THICK MSBAR SIZE OF OUTERMOST SQUARE12INCH SIZE OF INNERMOST SQUARE 4INCH EACHSQUARE CONNECTED WITH A GAP OF ONEINCH AT 4 SUITABLE PLACES WITH ONEANOTHER HANDLE OF SAME MATERIAL, STOP WATCH ELECTRONIC 1/100 SEC. Casio Stop Watch HS 70-W or similar, BINOCULAR LONG RANGE 10X50 CELESTRON MAKE UPCLOSE G2 MODEL OR SIMILAR, CROW BAR MADE OF HIGH CARBON STEEL 3 FEET LENGTH 24 MM DIA PER PIECE APPROX, COTTON DARI (RED/BLUE) SIZE 12FT X 18FT, TARPAULIN HEAVY COTTON CANVAS KHAKI SIZE 20FT X 20FT, L TYPE TENT WATER PROOF WITH IRON PIPE FRAME SIZE 6MTR X 4MTR, TENT 180 LBS WATER PROOF WITH ACCESSORIES SIZE 14FT X 14FT, TWOLAYER RANGE CENTER POLE UMBRELLAPOLE MADE UP IN TWO PIECESRADIUS OF CANOPY 1200MM HANGING FLAPS AROUND THE EDGEOPEN TYPE- MANUAL HANDLESQUARE BASE STAND UPPER POLE 1300MM LOWER POLE 1200MM FABRIC-POLYESTER COTTON COLOUR -WHITE AND ORANGE, RED FLAGS SIZE D21 X 60CM)

Details: CATEGORY: 4 MP ANPR with clamp , 2MP IP Motorized Camera STQC Certified with clamp , 2 MP IP PTZ Camera STQC Certified with clamp , 64 CH NVR , 8 Port Full Giga PoE Switch with 2 SFP Port , 4 Port Gigabit plus 2 Port Gigabit SFP Managed Industrial PoE Switch , Polmount Outdoor Heavy Duty Water Proof Rack Full Loaded , LC SFP Duplex Module , 6Core Armoured Optical Fiber Cable , Optical Fiber Patch Cords Single Mode Duplex , 8 Tb Hard Disk , LED TV 50 inch , 1KVA UPS , Media Convertor SFP 1G , RJ 45 Connector Box , Outdoor Cat6 Cable 305mtr Roll , GI Pole 18 feet , Fiber Jointer Box , Server Rack 18 U full loaded , Power Socket , Installation and laying charges

Details: BOQ ITEMS: Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing (1 Cement , 2 coarse sand (zone III), 4 graded stone aggregate 20 mm nominal size) , Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landing, balconies and access platform , Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts, Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more. , Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in a) Cement mortar (1 cement, 6 coarse sand) , 12 mm cement plaster of mix (1 cement, 4 fine sand) , Neat cement punning. , Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by EIC in skirting, risers of steps and dados over 12 mm thick bed or cement Mortar (1 cement, 3 coarse sand) and jointing with grey cement slurry, 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , White washing with lime to give an even shade. a) Satna lime wash on walls with one coat. , Removing white or colour wash by scrapping and sand preparing the surface smooth including necessary papering and repairs to scratches etc. complete, Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. One or more coats on old work , Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied, 3.84 kg per 10 sqm) , Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. One or more coats on old work , Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, One or more coats on old work , Providing and fixing soil, waste and vent pipes 100 mm dia, Sand cast iron S and S pipe as per IS 1729 , Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC, Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. , Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of EIC. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. , Cement concrete flooring (1 cement, 2 coarse sand, 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate, 1.5 mm thick decorative laminated sheet , Labour for fitting and fixing G.C.l. or C.A. sheet roofing in proper slope including the cost of J or L hooks, limpet Iand bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of EIC., Servicing of rolling Shutters, Rolling shutter made of 80mm x 1.25 mm machine rolled laths , Servicing of rolling Shutters, Top cover for rolling shutters 1.25 mm thick metre , Servicing of rolling Shutters, 27.5 cm long wire spring grade No. 2 for rolling shutters, Servicing of rolling Shutters, Ball bearing for rolling shutters

Details: Description:- Main Distribution Board (mdb): Supply, Fixing, Testing And Commissioning Of New 8 way Tpn Main Distribution Board (water Proof) Double Door Type, Sheet Steel, Dust Protected, Duly powder Coated, Inclusive Of 125 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Rail For mounting Mcbs As Required. (note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets are Required.)of Suitable Size In The Existing One, Each Main Distribution Board Shall Consist Of: I) 415v, 125a Tpn Mcb-1 Nos. Ii) 32 A Dp- 8 Nos. Iii) 10 A Sp-6 Nos. Iv) 40 Amp Rccb Tpn- 1 Nos. Make ofmcb'sexplainedinannexure-sofchapter-8 Disconnection&removalofoldmdb box/isolator/cables/wiresfromexistingmdbandreleasedmaterialtobehandedoverto sse/el/colony Office With All Accessories And The Required Civil Works Like Grove Cutting, Plastering, painting, All Interconnections In Suitable Capacity Etc Required For The Work Will Be On Contractor scope Only As Per Detailed Explanatory Note.

Details: Description:- Supply Of Outdoor Type Led 3d Light Fitting 16w, 48v, Ac Of Standard Size Along With led Light Conforming With Ip-67 & Ik-10 Water & Dust Proof, Impact Protection, Protection From Reverse polarity, Short Circuit, Open Circuit With Toughened Glass With Prizmatic Diffuser Etc. For Under Pit lighting Suitable For Surface / Recess Mounting Similar To Model Ir Goldc2 Of Goldwyn Make Or Similar reputed Make, Warranty-5 Years.

Details: CATEGORY: Aluminium label with Wire 3 inch X 1 inch , Polythene Bags 5 kg Capacity 45X30 , Synthetic Label water proof with eyeleted 8X3 cm , Polythene Bags 250 gm Capacity 15X10 cm , Polythene Bags 500 gm Capacity 22.5X15 cm , Blotting Paper Hand Made , Acrylic label with stand for field 4 inch x 3 inch x 16 inch , Acrylic label with stand for field 6 inch x 4 inch x 20 inch , Field note book , Laboratory coats Aprons - Terricot , Filter paper best quality 46x57 , Plastic pots made of fresh virgin 20x20x14 cm , Plastic pots made of fresh virgin 25x25x17 cm , Nursery bags Black with holes 17.5x10x5 cm , Nursery bags Black with holes 22x10x8 cm , Tissue paper roll -- , Tissue Paper Roll - , Butter Paper Sheet 38x50cm , Blotting Paper Hand Made - , Filter Papers Best Quality 46x57cm , Aluminium Foil 9 mtr -

Details: CATEGORY: Modular N plus 1 UPS , Battery bank for both 10 KVA modular N Plus 1 UPS , Metalic rack , Surge Protector Device , Work station For Centralized Monitoring , Wiring work for both modular UPS , Power Cable for Two 10 KVA N Plus 1 modular UPS , Power Cable for Two 10 KVA N plus 1 modular UPS , Data cable for Two 10 KVA N plus 1 modular UPS , ITC work for Two 10 KVA N Plus 1 modular UPS along with SPD , Conventional UPS in hot standby configuration , Battery bank for all four 05 KVA conventional UPS , Internal or External Automatic Transfer Switch for 05 KVA UPS , Wiring work for all 05 KVA UPS , Power cable for four 05 KVA UPS , Data cable for four 05 KVA UPS , ITC work for four 05 KVA UPS along with SPD and Automatic transfer switch , Copper Plate for earthing pit , Copper strip for earthing pits , Insulated Copper wire , PVC pipe , Salt , Charcoal , Construction of 04 Earth pits as per defined technical specification with using matreials as per above Sr. no. 31 to Sr. no. 36. , Bonding of earth pits , Earth bonding water proof junction box

Details: CATEGORY: Water Proof Multi Purpose Rain Poncho with Convertibility as Bivouac (MHA) (Q2) , bag kit universal (Q2) , Shirt Trouser TC KhakiBB2 B39 , Barret Cap Khaki , Cap Badge CCL , Shoulder Badge CCL , Socks Khaki Nylon , Lanyard With Whistle Khaki , Jersey Woolen V Neck Khaki , Chevron , Shirt and Trouser Khaki Woolen , Sari Khaki TC , Blouse Khaki TC , Petticoat TC , Hair Net , Can Lathi 5 , Can Lathi 3 , Star Four Point , Ribbon Red and Blue , Barret Cap Navy Blue , Lanyard Navy Blue , Belt Brown Leather , Great Coat Khaki Woolen , Jute Web Belt , PT Shoes Size 6 No , PT Shoes Size 7 No , PT Shoes Size 8 No , PT Shoes Size 9 No , Hunter Shoes 6 No , Hunter Shoes 7 No , Hunter Shoes 8 No , Hunter Shoes 9 No , Boot Black DMS Size 6 No , Boot Black DMS Size 7 No , Boot Black DMS Size 8 No , Boot Black DMS Size 9 No , Boot Brown Leather Size 7 No , Boot Brown Leather Size 8 No , Shoes Brown Leather Size 6 No , Shoes Brown Leather Size 7 No , Shoes Brown Leather Size 8 No