Uniform Tenders

Description: CATEGORY: TC BOOKLET WITH SCHOOL NAME PRINTED , STUDENT DAILY ATTENDANCE REGISTER OF CLASS VI TO XII , STAFF ATTENDANCE REGISTER , TEACHERS DIARIES LESSON PLAN REVISED ACCORDING TO BACK TO BASICS , CLASS WISE DAILY TEACHERS DIARY , ORDER BOOK , SERVICE BOOK REVISED WITH LATEST INSTRUCTION AS PER CHAUDHARI S , CHARACTER CERTIFICATE BOOK , ADMISSION AND WITHDRAWAL REGISTER , GENERATOR LOG BOOK , VEHICLE LOG BOOK , BLANK REGISTER 1 QUIRE RULED , BLANK REGISTER 2 QUIRE RULED , FILE TAG NYLON , DAILY CONSUMPTION REPORT REGISTER MESS 300 PAGES REGISTER , MESS ATTANDENCE REGISTER HOUSE MESS , DUTY MASTER REPORT REGISTER MOD , T ABILL FORMS LOOSE SHEETS CS17 , TA DA DELCARATION FORM CS 17A , STOCK REGISTER NON-CONSUMABLE , STOCK REGISTER CONSUMABLE , MISCELLANIOUS RECEIPT AND PAYMENT REGISTER , LEAVE SALARY AND PENSION CONTRIBUTION AC REGISTER CS28 , LOSSES WRITE OFF ACC REGISTER , DISPATCH REGISTR CS30 , STUDENT IDENTITY CARD , GATE ENTRY REGISTER , OUT PASS REGISTER , NIGHT ROLL CALL REGISTER , HOSTEL NIGHT ATTENDANCE REGISTER , P T MORNING ATTENDANCE REGISTER , CLASS ABSENTEE DIARY , HOSTEL EQUIPMENT DISTRIBUTION REGISTER FOR STUDENT , TOILET ITEM ISSUE REGISTER , UNIFORM DISTRIBUTION REGISTER , MEDICINES ISSUE REGISTER , REGISTER OF FUNDS RECEIVED FORM NVS , DAILY ATTENDANCE REGISTER ON SUPERIOR PAPER WITH AN ADDITIONAL SHEET FOR DETAILS ABOUT THE STUDENTS , LECTURE ATTENDANCE REGISTER , RECEIPT BOOKS FOR MISCELLANIOUS INCOME , CASUAL LEAVE REGISTER , EARNED LEAVE REGISTER , MEDICAL REIMBURSEMENT FORMS , MOVEMENT REGISTER , LOSS AND DAMAGE REGISTER FOR EACH LABORATORY , EXAMINATION ANSWER BOOK 11X 9 8 PAGES , SUPPLIMENTRY ANSWER SHEETS 11X9 4 PAGES , STATIONARY ISSUE REGISTER , BEDDING ITEMS DISTRIBUTION REGISTER , FILE COVER WITH SINGLE FOLD , FILE BOARD , FOUR FOLDER FILE , PRACTICAL NOTE BOOK GENERAL SCIENCE AND MATHS , GEOGRAPHY PRACTICAL BOOK , DRAWING BOOK 40 PAGES , GRAPH BOOK 32 PAGES , ENVELOP SIZE 254 X 44 CM 4 X45 , ENVELOP SIZE 12 X 10 INCH 3048X25 4 CM , APPLICATION FOR ADVANCE FORM CPF GPF ACCOUNT , APPLICATION FOR FINAL WITHDRAWAL FROM CPF GPF ACCOUNT , NOTE SHEET , A4 SIZE PAPER FOR CERTIFICATE PRINTING LIGHT GREEN , WHITE BOARD MARKER PEN BLUE , WHITE BOARD MARKER PEN BLACK , WHITE BOARD MARKER INK BLUE , WHITE BOARD MARKER INK BLACK , LONG EXERCISE BOOK 140 PAGES , GEOMETRY BOX DOMS , SHARPNER DOMS , CELLO PEN BLUE , PLASTIC SCALE , RUBBER ERAZOR , CHART PAPER

Details: Description:- Excavation Of Cable Trench As Per Cable Route Plan, 1.2 Mtr. Deep And Of 0.3 Mtr. To 0.6 mtr. Wide At Bottom As Per Rdso Sketch No. Sdo/cable Laying/003 Or Latest Alongside The Track In normal (all Type) Soil/strata, Conforming To Distances As Per Cable Route Plan And Refilling. This Work includes Clearing Of Route From Bushes Etc, Covering Of Cable Laid In Trench By Loose Soil For A Layer Of 50mm Thickness Approximately Before Covering By Bricks. The Work Shall Be Done As Per The Extant practice On Eastern Railway And Instructions Of Railway Engineer At Site. Note:-(a)for All Trenches From distant Signal To Home Signal And To Relay Room, The Minimum Headway Above The Uppermost Cable In the Trench Should Be 600mm. If Due To A Large No. Of Cables Headway I S Not Available, 4 " O F 1:2:4 concreting Should Be Done. Note:-(b-1) Payment Will Be Made As Per Actual Work Done On Pro-rata basis, If Required Depth Is Not Available At Site. (b-2) If The Depth Of Trench Is Not Uniform In A Span Of 100 Mtr. Or Shorter Lengths If Site Condition Demands Along The Cable Run, Minimum Depth Will Be taken For That Particular Stretch For Payment.

Details: Description:- Excavation Of Trench As Per Cable Route Plan In All Kinds Of Soil (1.2 Mtr. Depth And 0.3 mtr. To 0.6 Mtr Width At Bottom) And Refilling Of The Trench Without Bricks And Final Back Filling, ramming And Consolidation Of Soil As Well As The Disposal Of The Soil, If Any. Note:- Payment Will Be made As Per Actual Work Done On Pro-rata Basis, If The Required Depth Is Not Available At Site. If The depth Of Trench Is Not Uniform In A Span Of 100 M Or Shorter Lengths If Site Condition Demands Along the Cable Run Minimum Depth Will Be Taken For That Particular Stretch For Payment. Prior Permission should Be Taken From Field Officer Before Laying Of Cable If The Depth Of Trenching Is Less Than 1.2 Mtr. and Duly Mentioning Location, Length Etc. In Site Register. This Work Includes Clearing Of Route From bushes Etc. The Work Shall Be Done As Per The Extant Practice On Eastern Railway And Instructions Of railway Engineer At Site. For All Trenches From Distant Signal To Home Signal And To Relay Room, The minimum Headway Above The Uppermost Cable In The Trench Should Be 600mm. If Due To A Large No. Of cables Headway Is Not Available, 4" Of 1:2:4 Concreting Should Be Done.

Details: G.i.wire Netting Mesh 2 Inch X 2 Inch,1.5mtr Widthx5mtr Length , H.t.hand Gloves,11kv , Canvas Fire Fighting Hose,size 2.5 Inch,mass Per Meter Length 400g , First Aid Box , Canvas Fire Fighting Hose,size 3 Inch Nominal Diameter 70mm,mass Per Meter Length 470g , G.i.wire, 10swg , G.i.wire,12 Swg , Reflective Fluorescent Strip Jacket With Cil Logo And Ecl Printed On Both Side , Pvc,heavy Duty Suction Discharge Helical Water Hose, Size 3 Inch , Coupler For Hose 3 Inch , Synthetic Enamel Blue Paint , Danger Tape Barricade Tape,size 2 Inch,50mtr Per Roll , Insulation Tester,500v,with Leather Case, Ht Type , Leather Hand Gloves,12inch Long, Shall Have Uniform Leather Thickness As Per Is 578 1985 , Pu Coated Hand Gloves,heat Resistant,oil,water And Chemical Resistant, Industrial Use,cuff Length 25inch , Rubber Spray Hose,id 19mm,thickness 7mm,cotton Braided,black, Epdm,must Withstand Pressure Of 140psi. , Chaser Die Head 0.75inch, For M 20 Chaser Machine , Synthetic Enamel White Paint , Protective Safety Goggles For Ug Use

Description: CATEGORY: Senior Mechanical Fitter Marine Equipment for Second Year Qty 24 Months Refer SCC SOW an.. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 2 Highly Skilled Out sourced manpower services required Senior Mechanical Fitter Static and Rotary for Second Year Qty 24 Months Refer SCC SOW .. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 4 Skilled Out sourced manpower services required Maintenance Fitter Marine Equipment for Second Year Qty 48 Months Refer SCC SOW and ITB For Det.. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 4 Skilled Out sourced manpower services required Maintenance Fitter Static Rotary and Forklift for Second Year Qty 48 Months Refer SCC SOW and I.. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 4 Skilled Out sourced manpower services required Maintenance Fitter BOT Technician or Piping Technician Spares Management or Store Keeping for S.. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 1 Skilled Out sourced manpower services required Maintenance Fitter Foreman Piping Technician for Second Year Qty 12 Months Refer SCC SOW and IT.. , Custom Bid for Services - Total Price For Minimum Wages Including PF Overheads And Site Allowance Minimum 5 Semi Skilled Out sourced manpower services required Rigger for Second Year Qty 60 Months Refer SCC SOW and ITB For Detailed Description and Mo.. , Custom Bid for Services - Total Price For Bonus Or Exgratia At Eight Point Three Three Percentage Of Minimum Wages Per Month For 22 Manpower Services Qty Lumpsum 1 Refer SCC SOW And ITB For Detailed Description And More Details , Custom Bid for Services - Total Price For ESI Employer Contribution At Three Point Two Five Percentage For 22 Manpower Services Qty Lumpsum 1 Refer SCC SOW And ITB For Detailed Description And More Details , Custom Bid for Services - Provision For Leave With Wages At Four Point Eight One Of Minimum Wages Per Month For 22 Manpower Services Qty Lumpsum 1 Refer SCC SOW And ITB For Detailed Description And More Details , Custom Bid for Services - Provision For Premium For Group Personnel Accident Insurance Policy With A Coverage Of 5 Lakhs and Premium For PMJJBY and Premium For PMSBY for 22 Manpower Services Qty Lumpsum 1 Refer SCC SOW And ITB For Detailed Descriptio.. , Custom Bid for Services - Total Price For Uniform Cotton Other PPEs And Safety Gears For 22 Manpower Services Qty Lumpsum 1 Refer SCC SOW And ITB For Detailed Description And More Details

Description: CATEGORY: supply only led acid battery of capacity 80 AH 12 volt , supply only outer cover and inner cover tube with tyre size 215 to 75 R 16 for Tata xenon , supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 04 Nos front tyre , Supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 08 Nos Rear , Supply only tubeless tyre size 165 to 80 R14 for Maruti Dzire , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe motorcycle 04 Nos front Tyre , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe Motorcycle 04 Nos Rear Tyre , Mild steel barrel of 200 to 210 litres capacity close mouth barrel internally plain or expoxy coated externally painted 18 gauge tare weight 22 kgs height 890mm plus 3mm diamter 584mm max opening 50mm , LED acid battery of capacity 70AH 12 Volt , LED acid battery of capacity 100 to110AH 12 Volt , LED acid battery of capacity 150 AH 12 Volt , LED acid battery of capacity 180 AH 12 Volt , PAC powder for treatment of STP water , Battery charger of 12 Volt 5 Amp , Battery charger of 24 Volt 10 Amp , PVC flexible sever drain pipe of size 80mm , supply only dry maintenance free battery of capacity 7AH 12 Volt , Supply only dry maintenance free battery of capacity 12 AH 10 Volt , PVC service cable aluminium conductor of size 4 sqmm 2 core per 100 mtr bundle , PVC service cable aluminium conductor of size sqmm 2 core per 100 mtr bundle , Supply only LED bollard light with robust design and efficient light distribution of 9 to 10 watt 230 volts AC with all fittings , supply only three phase street lighting distribution board time board 6 kw 3 ph LDB 24 HR timer enclosure of thermoplastic polycarbonate degree of protection IP 65 , supply only cold shrinkable LT cable jointing kit for size 4Cx25 Sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 35 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 50 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 70 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 95 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 120 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 150 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 185 sqmm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 80mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 100mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 150mm , sluice valve both end flanged made of cost iron IS 5312 complete with nut bolt and washer size 150mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 100mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 80mm , Foot valve both end flanged made of cost iron IS 4038 complete with nut bolt and washers size 80mm , supply only uniformly distributed lead pig , supply only uniformly distributed lead wool , supply only graphite gland packing of size 6mm , supply only graphite gland packing of size 8mm , DOL starter for pump motor 10Amp , Star Delta starter for pump motor 15 Amp , Star Delta starter for pump motor 25 Amp , supply only 0 point 5 HP single phase booster pressur pum head range 6 to 24 M flow rate 633 Ipm copper wound

Description: CATEGORY: supply only led acid battery of capacity 80 AH 12 volt , supply only outer cover and inner cover tube with tyre size 215 to 75 R 16 for Tata xenon , supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 04 Nos front tyre , Supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 08 Nos Rear , Supply only tubeless tyre size 165 to 80 R14 for Maruti Dzire , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe motorcycle 04 Nos front Tyre , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe Motorcycle 04 Nos Rear Tyre , Mild steel barrel of 200 to 210 litres capacity close mouth barrel internally plain or expoxy coated externally painted 18 gauge tare weight 22 kgs height 890mm plus 3mm diamter 584mm max opening 50mm , LED acid battery of capacity 70AH 12 Volt , LED acid battery of capacity 100 to110AH 12 Volt , LED acid battery of capacity 150 AH 12 Volt , LED acid battery of capacity 180 AH 12 Volt , PAC powder for treatment of STP water , Battery charger of 12 Volt 5 Amp , Battery charger of 24 Volt 10 Amp , PVC flexible sever drain pipe of size 80mm , supply only dry maintenance free battery of capacity 7AH 12 Volt , Supply only dry maintenance free battery of capacity 12 AH 10 Volt , PVC service cable aluminium conductor of size 4 sqmm 2 core per 100 mtr bundle , PVC service cable aluminium conductor of size sqmm 2 core per 100 mtr bundle , Supply only LED bollard light with robust design and efficient light distribution of 9 to 10 watt 230 volts AC with all fittings , supply only three phase street lighting distribution board time board 6 kw 3 ph LDB 24 HR timer enclosure of thermoplastic polycarbonate degree of protection IP 65 , supply only cold shrinkable LT cable jointing kit for size 4Cx25 Sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 35 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 50 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 70 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 95 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 120 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 150 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 185 sqmm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 80mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 100mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 150mm , sluice valve both end flanged made of cost iron IS 5312 complete with nut bolt and washer size 150mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 100mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 80mm , Foot valve both end flanged made of cost iron IS 4038 complete with nut bolt and washers size 80mm , supply only uniformly distributed lead pig , supply only uniformly distributed lead wool , supply only graphite gland packing of size 6mm , supply only graphite gland packing of size 8mm , DOL starter for pump motor 10Amp , Star Delta starter for pump motor 15 Amp , Star Delta starter for pump motor 25 Amp , supply only 0 point 5 HP single phase booster pressur pum head range 6 to 24 M flow rate 633 Ipm copper wound

Description: CATEGORY: supply only led acid battery of capacity 80 AH 12 volt , supply only outer cover and inner cover tube with tyre size 215 to 75 R 16 for Tata xenon , supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 04 Nos front tyre , Supply only outer cover and inner cover tube with tyre size 7 point 50 to 16 LT for Tata LPT 709 08 Nos Rear , Supply only tubeless tyre size 165 to 80 R14 for Maruti Dzire , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe motorcycle 04 Nos front Tyre , Supply only outer cover and inner cover tube with tyre size 2 point 75 to 18 for Hero HF deluxe Motorcycle 04 Nos Rear Tyre , Mild steel barrel of 200 to 210 litres capacity close mouth barrel internally plain or expoxy coated externally painted 18 gauge tare weight 22 kgs height 890mm plus 3mm diamter 584mm max opening 50mm , LED acid battery of capacity 70AH 12 Volt , LED acid battery of capacity 100 to110AH 12 Volt , LED acid battery of capacity 150 AH 12 Volt , LED acid battery of capacity 180 AH 12 Volt , PAC powder for treatment of STP water , Battery charger of 12 Volt 5 Amp , Battery charger of 24 Volt 10 Amp , PVC flexible sever drain pipe of size 80mm , supply only dry maintenance free battery of capacity 7AH 12 Volt , Supply only dry maintenance free battery of capacity 12 AH 10 Volt , PVC service cable aluminium conductor of size 4 sqmm 2 core per 100 mtr bundle , PVC service cable aluminium conductor of size sqmm 2 core per 100 mtr bundle , Supply only LED bollard light with robust design and efficient light distribution of 9 to 10 watt 230 volts AC with all fittings , supply only three phase street lighting distribution board time board 6 kw 3 ph LDB 24 HR timer enclosure of thermoplastic polycarbonate degree of protection IP 65 , supply only cold shrinkable LT cable jointing kit for size 4Cx25 Sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 35 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 50 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 70 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 95 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 120 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 150 sqmm , cold shrinkable LT cable jointing kit for size 3 point 5 core x 185 sqmm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 80mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 100mm , sluice valve both end flanged made of cost iron IS 14846 complete with nut bolt and washer size 150mm , sluice valve both end flanged made of cost iron IS 5312 complete with nut bolt and washer size 150mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 100mm , Non return valve both end flanged made of cost iron IS 5312 complete with nut bolt and washers size 80mm , Foot valve both end flanged made of cost iron IS 4038 complete with nut bolt and washers size 80mm , supply only uniformly distributed lead pig , supply only uniformly distributed lead wool , supply only graphite gland packing of size 6mm , supply only graphite gland packing of size 8mm , DOL starter for pump motor 10Amp , Star Delta starter for pump motor 15 Amp , Star Delta starter for pump motor 25 Amp , supply only 0 point 5 HP single phase booster pressur pum head range 6 to 24 M flow rate 633 Ipm copper wound

Details: Description:- Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / level In Stages Not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The track, Insertion Of Moorum / Sand / Stone Ballast Uniformly Under The Existing Track And Placing The same To Safe Approved Gradient, Gauge, Cushion Including Levelling And One Round Of Through Packing to Allow Train Movement At Restricted Speed Of 30 Kmph For A Specified Length With All Leads & Lifts and Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. Note: Lifting Of Track Shall Be Done in Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The Proposed Final Level As Per approved Working Profile, As Directed By Engineer In-charge.

Details: Description:- Lifting And Packing For Regrading The Existing Psc Sleeper Track To Required Height / level In Stages Not Exceeding 75mm Or Part Thereof At A Time, Providing Permissible Ramp For The track, Insertion Of Moorum / Sand / Stone Ballast Uniformly Under The Existing Track And Placing The same To Safe Approved Gradient, Gauge, Cushion Including Levelling And One Round Of Through Packing to Allow Train Movement At Restricted Speed Of 30 Kmph For A Specified Length With All Leads & Lifts and Fixing, Marking, Painting Rail Level Pegs At Every 30m Interval. Note: Lifting Of Track Shall Be Done in Stages As Per Procedure Prescribed In Latest Edition Of Irpwm To Get The Proposed Final Level As Per approved Working Profile, As Directed By Engineer In-charge.