Bhadradri Kothagudem Tender Results

CATEGORY: Shoe Polish Liquid as per IS 12010 (Q4)

CATEGORY: SPINDLE C 2306 1 , SPINDLE SCREW B 5126 1 , MALE CLUTCH B 5127 1 , BEARING SPACER A 131 1 , DRAG BUSHING C 5194 2 , RING DAM GASKET A 117 1 , BELT BS 3029 7 , BEARING SEAL RING P NO 7FF 18 AL , COUPLING NUT C 5253 1 , COLLET L 5226 3A , DRAG BODY GASKET P NO 410 1 , BOWL BOTTOM GASKET P NO D2327 27 , FEED NOZZLE GASKET D2324 38 , BEARING FILLER B 281 1 T , BEARING PULLEY CAP C 5260 1 , IDLER SPINDLE A1232 1 , FEED NOZZLE BRASS C5230 4 , BEARING SLEEVE NUT , IDLER ASSEMBLY , FEMALE CLUTCH B 5250 B1

CATEGORY: PUMP IMPELLER PUMP TYPE. RPH-CM-100-450, PUMP Sr.NO.459017 to 459020 FOR PUMP TAG No. 12-P- 109BY209. , PUMP IMPELLER PUMP TYPE. RPK-CM-50-315, PUMP Sr.NO.459053 to 459056 FOR PUMP TAG No. 12-P- 120BY220. , PUMP IMPELLER PUMP TYPE. RPK-CM-50-315, PUMP Sr.NO.459057 to 459060 FOR PUMP TAG No. 12-P- 121BY221. , PUMP IMPELLER PUMP TYPE. RPK-CM-50-315, PUMP Sr.NO.459061 to 459064 FOR PUMP TAG No. 12-P- 122BY222. , PUMP IMPELLER PUMP TYPE. RPK-CM-50-315, PUMP Sr.NO.459065 to 459068 FOR PUMP TAG No. 12-P- 123BY223.

Screw Drivers As Per Is 844

CATEGORY: SUPPLY OF TELEMECHANIQUE RELAYS, MODEL NO. RHN 412F. (Q3)

CATEGORY: SUPPLY OF CAUSTIC SODA LYE (TECHNICAL GRADE) ON 100% BASIS CONFIRMING TO IS-252-2013(FOURTH REVISION (Q3)

Manufacturing,testing,packing Supply Of Following Cadmium Coated Stud With One Nut For Dd Valve Bod CATEGORY: MANUFACTURING,TESTING,PACKING SUPPLY OF FOLLOWING CADMIUM COATED STUD WITH ONE NUT FOR DD VALVE BODY BONNET JOINTS AS PER TECH SPEC AT ANNEX-B,M 14 X 85 mm LONG, COARSE PITCH 2.0 mm AS PER ANNEX 1 , M 18 X 100 mm LONG, COARSE PITCH 2.5 mm AS PER ANNEXURE-1 , M 27 X 130 mm LONG, COARSE PITCH 3.0 mm AS PER ANNEXURE-1 , M 16 X 47 mm STUD 14 INCH to 18 INCH SIZE VALVES COARSE PITCH , M 20 X 67 mm STUD 30 INCH AND 36 INCH SIZE VALVES COARSE PITCH , M 10 X 100 mm LONG COARSE SERIES , M 12 X 100 mm LONG COARSE SERIES , MANUFACTURING,TESTING,PACKING , SUPPLY OF FOLLOWING ELECTROLESS NICKEL COATED CARBON STUD WITH ONE NUT AS PER TECH SPEC AT ANNEX-C ,M 16 X 65 mm LENGTH , M -16 X 75 mm LENGTH , M -20 X 85 mm LENGTH , M- 24 X 95 mm LENGTH , M -24 X 120 mm LENGTH , MANUFACTURING,TESTING,PACKING , SUPPLY OF FOLLOWING CARBON STEEL FULL THREADED STUD WITH TWO NUTS AS PER TECH SPEC AT ANNEX-A ,1 3 BY 8 INCH X 425 mm LENGTH , 1 1 BY 4 INCH X 525 mm LENGTH , 1 1 BY INCH X 250 mm LENGTH , 1 1 BY 8 INCH X 400 mm LENGTH , 1 INCH X 190 mm LENGTH , 1 INCH X 205 mm LENGTH , 7 BY 8 INCH X 190 mm LENGTH , 3 BY 4 INCHX 180 mm LENGTH , 3 BY 4 INCHX 150 mm LENGTH

4 Inch Journal Bearing Bearing Bush Assembly For Fd Fan As Per Enclosed Drawings And Annexure Ts,5

CATEGORY: Measuring Tape (Q3) , Screw Drivers as per IS 844 (Q4) , Cutting Wheel (Q3)

Supply Of Tyre With Rim 205/50-10 Tubeless 6 Ply. Detailed As Per Specification Attached