Tiruchirappalli Tender Results

CATEGORY: THREAD CHASER METRIC 3PITCH

CATEGORY: mosquito repellant cream spray and lotion (Q4)

CATEGORY: INSTALLATION OF VIDEO WALL 2 x 2 (4 DISPLAYS) TO SIZE W7.94 X H 4.47x D 0.23 FT, DIAGONAL 109.31" , W , SUPPLY OF VIDEO WALL 2x2(4 DISPLAYS) TO SIZE W 7.94 x H4.47 x D0.23 FT. DIAGONAL 109.31" , WEIGHT 67.

CATEGORY: SUPPLY OF VIDEO WALL 1 X 2 (2 DISPLAYS) TO SIZE W 3.97 X H 4.47 X D 0.23 FT. DIAGONAL 54.655" , WEIGH , INSTALLATION OF VIDEO WALL 1x2 (2 DISPLAYS) TO SIZE W3.97 x H 4.47x D0.23 FT, DIAGONAL 54.655" , WEIG

CATEGORY: Custom Bid for Services - Re-canning of CH6 Armed chair / CH4 Armless chair seat & back at BHEL Trichy

CATEGORY: XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2)

CATEGORY: Hand Held Search Light (Q2)

CATEGORY: PAPER COMPUTER INTERLEAVED (PRE-PRINTED MANUFACTURING WARRANT FORM 2 PLY WITH CARBON) 80 GSM SIZE 30

CATEGORY: PAPER COMPUTER INTERLEAVED (PRE-PRINTED MATERIAL WARRANT FORM 2 PLY WITH CARBON) 80 GSM SIZE 30.5 X

CATEGORY: 920054400000-UN MACHINED BEARING LEVER AS PER DRG.3-45-836-00015 REV 01 AND SPECIFICATION ASTM A297 GR HH , 920055910100-UN MACHINED LEVER MAIN TILT VAR 01 AS PER DRAWING 3-45-000-01433 REV 02 AND TDC 0435 REV 00 SPECIFICATION ASTM A27 Gr 65-35 WITH RADIOGRAPHY TEST , 920055920100-UN MACHINED LEVER MAIN TILT VAR 02 AS PER DRAWING 3-45-000-01433 REV 02 AND SPECIFICATION A27 GR65-35 AND TDC 435 REV 00 - WITH RADIOGRAPHY TEST , 920055930100-UN MACHINED LEVER MAIN TILT DRIVE MECH AS PER DRAWING 3-45-000- 01159 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055940100-UN MACHINED LEVER INT BELL CRANK VAR01 AS PER DRAWING 3-45-000-01434 REV 01 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055970200-UN MACHINED RODENDCLEVIS SMALL VAR 01 AS PER DRAWING 4-45-000-01482 REV 01 AND SPECIFICATION A216GrWCA , 920055980200-UN MACHINED ROD END CLEVIS SMALL VAR 02 AS PER DRAWING 4-45- 000-01482 REV 01 AND SPECIFICATION A216GRWCA , 920055990200-UN MACHINED ROD END CLEVIS LARGE VAR 01 AS PER DRAWING 3-45-000-01156 REV 02 AND SPECIFICATION A216GRWCA , 920056030200-UN MACHINED NOZZLE TIP SUPPORT BLOCK AS PER DRAWING 4-45-000-01481 REV 01 AND SPECIFICATION SA351- 18CR8NI , 920056040200-UN MACHINED NOZZLE TIP SUPPORT BLOCK CAP AS PER DRAWING 4-45-000-01480 REV 01 AND SPECIFICATION A351-18CR8NI , 920056200000-UN MACHINED DIFFUSER CONE EXTN LEVER AS PER DRG.4-41-350-00877 REV 07 AND SPECIFICATION SA216 GR WCA , 920131830000-UN MACHINED SUPPORT LUG AS PER DRG.6112-2042-21 VAR.01 REV.02 AND SPECIFICATION SA351GRCH20 , 920131840000-UN MACHINED SPACER LUG AS PER DRG.6112-2041-21 VAR.01 REV.02 AND SPECIFICATION SA351GRCH20 , 920132940000-UN MACHINED CLAMP CASTING AS PER DRG.3-41-000-00342 REV 00 AND SPECIFICATION SA 216 WCA , 920400010000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45-000-01655 REV 00 AND SPECIFICATION SA351-18CR8NI , 920401900000-UN MACHINED PIN CONNECTING LUG DIA 13 MM HOLE AS PER DRG.4-45-836-00047 REV 02 AND SPECIFICATION ASTM A297GRHH , 920404830000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45-000-01158 REV 00 AND SPECIFICATION SA351-18CR8NI , 920510040000-UN MACHINED DIFFUSER DISK CASTING AS PER DRAWING 3-41- 125-00116 REV 04 AND SPECIFICATION A560-50CR50NICB , 920510230000-UN MACHINED 3 BY 8 INCH FEMALE CONNECTOR AS PER DRG.4-11-395-00503 REV.00 AND SPECIFICATION SA351GRCH20 , 920510800000-UN MACHINED 3 BY 8 INCH MALE CONNECTOR AS PER DRG.3- 11-078-04450 REV.03 AND SPECIFICATION SA351CK20 , 920510810000-UN MACHINED 3 BY 8 INCH FEMALE CONNECTOR AS PER DRG.3-11-078-04451 REV.01 AND SPECIFICATION SA351CK20 , 920510820000-UN MACHINED FLEXIBLE TIE 76.2 MM AS PER DRG.3-11-078-04460 REV.01 AND SPECIFICATION SA351CK20 , 920510830000-UN MACHINED DIFFUSER DISC AS PER DRAWING 4-45-000- 01470 REV 00 AND SPECIFICATION A560-GR50CR50NICB