Tender Results of Defence Research And Development Organisation in Maharashtra

CATEGORY: Rear Closing Plate Assy-BWH as per Drg. No. 2112 02 01 04 00 000 00XA , Rear Gasket-BWH as per Drg. No. 2112 02 01 00 00 005 00XA , Rear Bulkhead Assy-BWH as per Drg. No. 2112 02 01 03 00 000 00XB

CATEGORY: EXPLOSIVE VAN LOAD CAPACITY 10 TON

CATEGORY: Non Sparking Flat Screwdriver 10 x 300 x 420 mm , Non Sparking Flat Screwdriver 12 x 350 x 470 mm , Non Sparking Flat Scraper 12 x 150 mm , Non Sparking Flat Scraper 8 x 150 mm , Non Sparking Flat Scraper 20 x 300 mm , Non Sparking Scraper L Shape 30W x 30H x125L , Non Sparking Scraper L Shape 10W x 30H x125L , Non Sparking Scraper L Shape 15W x 30H x125L , Non Sparking Flat Scraper 40 x 300 MM , Non Sparking Round Files 300 MM , Non Sparking Putty Knife Types A 25 x 200 MM , Non Sparking Putty Knife Types A 25 x 150 MM , Non Sparking Putty Knife Types A 25 x 300 MM , Non Sparking Common Knife 40 x 300 x 425 MM , Non Sparking Putty Knife Types B 75 x 200 MM , Non Sparking Putty Knife Types B 100 x 200 MM , Non Sparking Planers 150 MM , Non Sparking Planer Blade 40 MM , Non Sparking Small Decoring Kit , Non Sparking Handsaw 750 MM , Non Sparking Cu-Ti UBR Punching Dye Od 50 x ID 35 x 117 MM , Non Sparking Specimen Holder D1 55 x D2 70 x L 117 MM , Non Sparking RUSS Punching Dye OD 50 x ID 20 x L 117 MM , Non Sparking RUSS Specimen Holder OD 50 x L 107 MM , Non Sparking CuTi T Burner Punching Dye D 20x L 107 MM , Non Sparking Flat Screwdriver Offset 6 x 72 MM , Non Sparking Flat Screwdriver Offset 7 x 120 MM , Non Sparking Flat Flies 300 MM , Non Sparking Punching Die Wheel Peel , Non Sparking Dumbell Cutter ISO Type 1Spring loaded with Taper 115 x 25 MM , Non Sparking Allen Key 4 MM , Non Sparking Allen Key 5 MM , Non Sparking Allen Key 6 MM , Non Sparking Allen Key 7 MM , Non Sparking Allen Key 8 MM , Non Sparking Allen Key 9 MM , Non Sparking Allen Key 10 MM , Non Sparking Allen Key 11 MM , Non Sparking Allen Key 12 MM , Non Sparking Allen Key 13 MM , Non Sparking Allen Key 14 MM , Non Sparking Allen Key 15 MM , Non Sparking Allen Key 16 MM , Non Sparking Allen Key 17 MM , Non Sparking adjustable wrench 12 inch 36 x 300 MM , Non Sparking Flat Screwdriver 12 x 350MM x 470 MM , Non Sparking Hex Drive Nut 10 x 110 MM , Non Sparking Hex Drive Nut 12 x 120 MM , Non Sparking Long Nose Pliers 200 MM , Non Sparking Combination Pliers 200 MM , Non Sparking Double Ended Open Spanner 12 x 13 MM , Non Sparking Double Ended Open Spanner 16 x 17 MM , Non Sparking Double Ended Open Spanner 18 x 19 MM , Non Sparking Double Ended Open Spanner 24 x 27 MM , Non Sparking Double Ended Open Spanner 30 x 32 MM , Non Sparking Doble Ended Ring Spanner 12 x 13 MM , Non Sparking Doble Ended Ring Spanner 16 x 17 MM , Non Sparking Doble Ended Ring Spanner 18 x 19 MM , Non Sparking Doble Ended Ring Spanner 24 x 27 MM , Non Sparking Doble Ended Ring Spanner 30 x 32 MM , Non Sparking Triangle Files 6 inch , Non Sparking Brass Wire Brush 25 x 300 MM , Non Sparking C Clamp 36 x 60 x 210 MM , Non Sparking C Clamp 36 x 80 x 250 MM , Non Sparking C Clamp 36 x 100 x 290 MM , Non Sparking Oil Pump , Non Sparking Scriber 5 x 30 x 180 MM , Non Sparking Scriber 5 x 40 x 250 MM , Non Sparking Hacksaw Frame 500 MM , Non Sparking Hacksaw Blade Single Cut 12 x 300 MM , Non Sparking Hacksaw Blade Double cut 12 x 300 MM

CATEGORY: Automatic Thermal Conditioning System with accessories as per specification no. HEMMED230

CATEGORY: PENTA 24N104J000 T-2 W-1.04 IC908 , PENTA 24N150J010 R-.1 T-5 W-1.50 IC908 , PENTA 24N200J020 R- 2 T-6 W-2.0 IC908 , PENTA 24N247J020 R- 2 T-5 W-2.47 IC908 , PENTA 24N300J000 R- 2 W-3.0 IC908 , PCHR 25-24,25X25 F-23.5, L-135 -F12 RH , PCHL 25-24,25X25 F-23.5, L-135-F12 LH , PCHR 25-24,20X20 F-18.5, L-120-F12 RH , SVJNR 2525M-12F RH , SVJNL 2525M-12F LH , SVJNR 2020M-12F RH , VNMG 12T302-NF IC3028 , VNMG 12T304-NF IC3028 , VBMT 160404-SV VP15TF , DNMG 150604 2P TN 15M , VCGT 160408-AK , CCMT 09T304 CCMT 3251 TN 2000 , LA PARTING OF TOOL INSERT W-4.15 , THREADING INSERT PITCH RANGE 1.5-2 MM , THREADING INSERT PITCH RANGE 2.5-4MM , GROOVING INSERT W-3MM , RIGHT HAND PARTING TOOL HOLDER 20X20 , RIGHT HAND PARTING TOOL 25X25 , RIGHT HAND PARTING TOOL 20X20 T-40 , RIGHT HAND PARTING TOOL 25X25 T-40 , LEFT HAND PARTING TOOL 20X20 , LEFT HAND PARTING TOOL 25X25 , RIGHT HAND PARTING TOOL 2020 T-40 , LEFT HAND PARTING TOOL 2525 T-40 , BORING BAR S25T , TOOL HOLDER BUSHNG TYPE J , TOLL HOLDER BUSHUNG TYPE CS , TURNING TOOL HOLDER FROM B1 , BORING BAR HOLDER FROM E2 , COLLET ER-40 , COLLET CHUCK ER-40

Hiring Of Additional Private Security Manpower 02 Nos Supervisors And 22 Nos Unarmed Security Guards

CATEGORY: Customized AMC/CMC for Pre-owned Products - HP; HP,LIBERT,SONICWALL,IOSAFE,EATON ETC; Comprehensive Maintenance Contract (CMC); MONTHLY; No

CATEGORY: Proof Target for Lethality Trial as per Specn. No ARDE/IA/PT/2025/01

CATEGORY: Rotary Joint BN835047 make Spinner GmbH Germany , Single channel rotary joint DC-18 GHz N female part number RJ1-18-005 , Assembled LVDS to TTL and RS422 Convertor Board , ADIS breakout board ADIS16IMU1/PCBZ

CATEGORY: Stationary Valve Regulated Lead Acid Batteries (V2) as per IS 15549 (Q3)