Fabrication Tender Results

Description: INNER CONE DRUM SECTION (HY-2.10) - FABRICATED AND FULLY M/CD AS PER DRG. 26137600038/09 WITH MATL

CATEGORY: Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 1 Removal of insulation along with mineral wool wire mesh binding wires and cladding sheet on sodium pipelines; As per tender d.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 2 Fixing of mineral wool insulation along with wire mesh binding wires fixing screws and Aluminium cladding sheet on sodium pi.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 3 Stainless steel pipe cutting grinding WEP LPE of WEP fitup welding; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 4 Sodium wetted Stainless steel pipe cutting cleaning grinding WEP LPE of WEP fitup welding; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 5 Carbon steel pipe cutting grinding WEP LPE of WEP fitup welding using CS electrode or filler wire including root and final .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 6 Erection of SS piping CS Piping fabrication of bend routing Surface treatment like pickling and passivation or painting pneum.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 7 Modification and Fabrication of existing Structural Steel Support structure as per suit to site condition; As per tender docum.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 8 Erection of sodium pipe Support with support clamps; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 9 Cutting blanking and removal of sodium wetted pipeline and valves at Primay Ramp location; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 10 Installation and removal of scaffolding including supply; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 11 Radiography testing using Se75 Ir192 as per requirements; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 12 Cutting and removal of support structures at SGDHR loop 60m elevation for accessing and operating valves and equipments; .. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 13 Removal of Small sodium components from the loop and re erection of spare after collecting from CMM BHAVINI; As per tender do.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Pipelines, Sl No 14 Removal rectification and reinstallation of relief valves and diaphram valves at site; As per tender document

Description: Superstructure of Cook House Dining Hall,Fabrication from Structural steel and all other specificat

Description: LABOUR CHARGE FOR FABRICATION OF MOTOR BASE / A-FRAME / SUPPORT FOOT /ACTUATOR BASE / ANTI-ROTATION

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia , Stone boulder 9inch to 12inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded . , Coarse Aggregate 40mm graded , Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol , PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll , Cement based paint Snowcem Make Berger or Asian or Nerolac , Synthetic paint enamelled OG conforming to IS 5 Ur 2004 Make Asian or Berqer or Nerolac , Synthetic Paint enamelled Brown confirming to IS 5 2004 Make Berger or Asian or Nerolac , Anti corrosive Red Oxide zinc chromate primer conforming to IS 5 2004 Make Asian or Berger or Nerolac , Loop Holes 1000 x 300 mm Make Tata or Sail or JSW , Ventilator Steel 300 x 450 mm will be fabricated using ISA 35 x 35 x 5mm for outer frame and ISA 30 x 30x 3mm for shutter frame with blace sheet as per TS , MS Binding Wire , ISMB hot rolled MS 125 4000 mm long Make Tata or Sail or JSW , ISMS hot rolled MS 125 1200 mm long Make Tata or Sail or JSW , SRT 1840 x 613x 180 mm 2 mm thick MS Sheet Hot rolled steel with nuts bolt incl one coat of Red Oxide Make Tata or Sail or JSW , Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner as per TS , HDPE sand Bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per Bag , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part ll 1982 Make Tata or Sail or JSW , Prefeb folding double sleeping bunks madeof MS columns 65x 65x6mm and ms plate form made of ISA 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per TS , Polythene sheet colour less and weight of sheet shall be not less than 70gm or Sqm , Wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 X 0 point 026m , Wooden Scantling various sizes , Nails various size , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side , Air termination single pointed aluminium rod 12mm dia and 300mm long , GI pipe 20 mm dia light grade Make Jindal or Tata or Kalinga , GI pipe 40 mm dia light grade Make Jindal or Tata or Kalinga , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex , Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw , Aluminium strips 25x3mm , Nut and bolts 6 mm dia 30mm long with check nut and washer , Charcoal , Salt normal , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1 point 5 m Long Pipe Make Jindal or Tata or Kalinga , Galvanised iron strip 32x6mm

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech, ACC,JK or Dalmia under Job No 2504 AGS PD as per store list att , Stone boulder 9 inch to 12 inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded , Coarse Aggregate 40mm graded , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make- Tata,Sail,JSW , Water proofing compund conforming to IS 2645-2003 Make- Pidilite,Dr Fixit,Fevicol , Quick setting compound Make- Pidiite,Quick Fix,Fevicol , PBS Roll 20m Long , Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , GI binding wire TATA,Sail,JSW , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Slack lime , Painting brush 4 inch ISI Marked , HDPE sand Bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique Bag , Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian,Berger,Neroloc , Synthetic paint enamelled OG conforming to IS 5-2004 Make- Asian,Berger,Nerolac , Thinner Make-Nerolac,Berger,Asian , SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make- TATA, SAIL,JSW , ISMB hot rolled 200x100mm and 4 mtr long Make-TATA,SAIL,JSW , Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame of Make-Tata,Sail,JSW as per store list , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata,Sail,JSW , Loop Holes 780 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1000 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1250 x 300 mm Make-TATA, SAIL,JSW , Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm Make-TATA, SAIL,JSW as per store list , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Air terminal single pointed aluminium rod 12mm dia and 300mm long , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mmas per store list , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make-Jindal, Tata, Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make- Presto,Polycab, Finolex , Charcoal , Salt

Description: Fabrication and supply of stiffened segment

Description: Intra-Oral Scanner for Fabrication of (Sterio-Lithography) STL Model in CAD CAM Machine

Description: FABRICATION AND SUPPLY OF BOREHOLE DEVIATION LOGGING PROBE ASSEMBLY AS PER SPECIFICATION ATTACHED

Description: Fabrication, SUpply, Installation, of Customize Jaggery making furnace with porous media, utensils,