Tender Results of Nlc Tamilnadu Power Limited

CATEGORY: Air Diversion Assembly , Coal Compartment Seal Plate , Coal Nozzle Tip Lock , Coal Nozzle Compartment Support , Shear Pin for Burner Tilt , Key Type I , Key Type II , Silicon O Ring 57x50x3.5 , Oil gun guide and diffuser , Scanner Guide pipe , Ignitor Guide pipe

CATEGORY: O-RING ID 50 mm X 4 mm Viton Rubber , O Ring 14 mm X 1.78 mm Viton Rubber , O-RING 0.275 inch X 20.95 inch BS 1806-1989 , O-Ring ID 79.5 x Thickness 4 mm Viton , O- Ring ID 70 x Thickness 5.3 mm Viton , O-Ring ID 50 x Thickness 3.5 mm Viton , O-Ring 60mm X 4 mm Viton Rubber , O-Ring 34.5mm X 3.55 mm Viton Rubber , O-Ring 19mm X 2.65 mm Viton Rubber , O-Ring 11.2mm X 1.8 mm Viton Rubber , O-Ring 18mm X 3.55 mm Viton Rubber , O- Ring 43.7mm X 3.55 mm Viton Rubber , O-Ring 67mm X 3.55 mm Viton Rubber , O-Ring 75mm X 5.3 mm Viton Rubber , O-Ring 50mm X 3.55 mm Viton Rubber , O-Ring 60mm X 5.3 mm Viton Rubber , O-Ring 92.5mm X 5.3 mm Viton Rubber , O-Ring 75.8mm X 3.53 mm Viton Rubber , O- Ring 7.0mm X 1.5 mm Viton Rubber , O-Ring 56mm X 4 mm Viton Rubber , O-Ring 63mm X 3 mm Viton Rubber , O-Ring for SKO 16 - O-Ring 12mm X 2 mm Viton Rubber , O-Ring for SKO 20 - O-Ring 16.3mm X 2.4 mm Viton Rubber , O-Ring for SKO 30 - O-Ring 20.3mm X 2.4 mm Viton Rubber , O- Ring for SKO 25 - O-Ring 25.3mm X 2.4 mm Viton Rubber , O-ring kit Viton, in inches size , O-ring kit Viton, in MM size , O Ring Cords 8 mm Viton Rubber , OIL SEAL SIZE 25 ID x 40 OD x 10 MM, Material -VITON FOR HYDRAULIC SPEED GOVERNER , OIL SEAL SIZE 15 ID x 30 OD x 12.5 MM, Material -VITON FOR HYDRAULIC SPEED GOVERNER , OIL SEAL SIZE 12 ID x 27 OD x 9.5 MM, Material -VITON FOR HYDRAULIC SPEED GOVERNER

Astronomical Timer For Street Light Control (timer Controls) As Per Is 9000

CATEGORY: Custom Bid for Services - Hiring of one minivan vehicle on 12 hours basis and another one minivan vehicle on 24 hours basis Total 02 nos Minivan vehicles with seating capacity of 13 Seater or above for CISF Fire Barrack CISF kids school trips and oth..

CATEGORY: Custom Bid for Services - Third Party Inspection TPI of conveyor belts

Custom Bid For Services - Construction Of Basket Ball Court In Ntpl Township

CATEGORY: Custom Bid for Services - Design Supply and Erection of Ceramic Pad Insulation of HP IP TDBFP Turbines Other pipings in UNIT 2

CATEGORY: 1800 KVA, 11/0.500 KV, Cast Resin Dry Type Transformer of Vector Group: Dyn11 (Q3)

Bmc For Outsourcing Operation And Maintenance Of Ash Handling System Of Unit I And Ii For Period Of Two Years During 2024 2026

CATEGORY: QUICK EXHAUST VALVE , Pnuematic limit switch , POLYURETHANE PIPE OD-6MM X ID-4MM , POLYURETHANE PIPE OD-10MM X ID-7 , MALE CONNECTOR 10MM x Quater INCH , MALE CONNECTOR 6MM X Quater INCH , MALE CONNECTOR 10MM X Half INCH , MALE CONNECTOR 6MM X Half INCH , MALE 10MM X Quater INCH ELBOW , MALE 6MM X Quater INCH ELBOW , MALE CONNECTOR 6MM X 3 OVER 8 INCH , Level sensing drain valve , model- LDV 2000 , level sensing drain valve, model- LDV 2030 , Timer based Auto drain valve, 230 Vac