Tender Results of Yantra India Limited

CATEGORY: BURNER BLOCK FOR FORGING FURNACE. AS PER DRAWING NO. NGF-350 (Q3)

CATEGORY: ROOF DELTA CASTABLE. CHEMICAL COMPOSITION: Al2O3- 80% MIN, Fe2O3-2% MAX, Cr2O3-3% MAX, ADDITIVE-2% SS FIBRE (Q3)

CATEGORY: Small Angle Grinders (Q3)

CATEGORY: S S CORRUGATED BELLOWS HOSE WITH S S WIRE BREADING STAINLESS STEEL FEMALE SWIVEL NUT AND NIPPLE FITTING ON BOTH ENDS WORKING PRESSURE 10 KG PER CM SQUARE TESTED , CARBON FREE RUBBER HOSE WITH ASBESTOS SLEEVE AND BOTH END FITTED WITH SWIVEL NUT AND NIPPLE WORKING PRESSURE 10 KG PER CM SQUARE HOSE MAKE DUNLOP INDO MAKSSON GATES PADAMINI TEKSONS FLEXI HOSE , CARBON FREE RUBBER HOSE WITH ASBESTOS SLEEVE AND BOTH END FITTED WITH 1 INCH BSP SWIVEL NUT AND NIPPLE MAKE DUNLOP INDO MAKSSON GATES PADMINI VARDHMAN FLEXI HOSE , CARBON FREE RUBBER HOSE WITH ASBESTOS SLEEVE AND BOTH END FITTED WITH BSP SWIVEL NUT AND NIPPLE WORKING PRESSURE 10 KG PER CMSQUARE HOSE MAKE DUNLOP INDO MAKSSON GATES PADAMNI TEKSONS FLEXI HOSE , PNEUMATIC ROCK DRILL HOSE TO SPECIFICATION AS PER IS 446 1987 TYPE 3 MAKE DUNLOP INDOMAKSSON , STEEL CHAIN WITH 4 JOINTING LINK IN EVERY PACKET MAKE DIAMOND RENOLD AND ROLON , SET OF CHAIN SPROCKET , HYDRAULIC HOSE PIPE M22 X 1 METER LENGTH TAPER FERRUL FITTING HIGH PR R 2 HIGH PRESSURE 200 KG PER CM SQUARE AND WORKING PRESSURE 90 KG PER CMSQUARE MAKE TEKSONS GATES SUPER SEAL HMT , HYDRAULIC HOSE PIPE M22 X 1.5 METER LENGTH TAPER FERRUL FITTING HIGH PR R 2 HIGH PRESSURE 200 KG PER CM SQUARE AND WORKING PRESSURE 90 KG PER CMSQUARE MAKE TEKSONS GATES SUPER SEAL HMT , HYDRAULIC HOSE PIPE M22 X 2 METER LENGTH TAPER FERRUL FITTING HIGH PR R 2 HIGH PRESSURE 200 KG PER CM SQUARE AND WORKING PRESSURE 90 KG PER CMSQUARE MAKE TEKSONS GATES SUPER SEAL HMT , HYDRAULIC HOSE PIPE M22 X2.5METER LENGTH TAPER FERRUL FITTING HIGH PR R 2 HIGH PRESSURE 200 KG PER CM SQUARE AND WORKING PRESSURE 90 KG PER CMSQUARE MAKE TEKSONS GATES SUPER SEAL HMT

CATEGORY: SMCRCA Coil of size 1.6 mm thick X 1250/1270/1310 mm width (Q3)

Pneumatic Feeder For Mechanical Press, Size 50 X 50 X 1 Mm, Air Pressure 6 Bar, Suitable For Strip

CATEGORY: ORDINARY PORTLAND CEMENT (OPC) , 43 GRADE, PACKED IN 50 KG, BAG, CONFIRMING TO IS: 8112/1989 REAFFIRM (Q3)

Conversion Of Base Bleed Motor Of Forged Blank Drg. No. F-453f (or Latest Issue) To Machined Drg. N

1.2mm Ss Mig Welding Wire As Per Specification Aws: A5.9 Er 309l, Suitable To Use In Mig Welding Sy CATEGORY: 1.2MM SS MIG WELDING WIRE AS PER SPECIFICATION AWS: A5.9 ER 309L, SUITABLE TO USE IN MIG WELDING SYST (Q3)

Carbide Die For Heading To Ofaj. Drg. No. Cct-734.