Tender Results of Nuclear Power Corporation Of India Limited

CATEGORY: 33-HSS Cutting Tool Bits Square Ends HARDERNED GROUND TO CRYOGENIC ULTRTA LOW HEAT TREATMENT SIZE 5 BY 8 INCHX 6INCH LONG X 10 PERCENTAGE COBALT , Item No. 34-WHEEL GRINDING SILICON CARBIDE 150 X 25 X31.75 MM 4200 RPM FINE , Item No. 35-WHEEL GRINDING SILICON CARBIDE 150 X 25 X31.75 MM 4200 RPM ROUGH , Item No. 36-Threading Die Nut 1 by 2 Inch BSW , Item No. 37- Threading Die Nut 7 by 8 Inch BSW , Item No. 38-Threading Die Nut 3 by 4Inch BSW , Item No. 39- REVOLING CENTER MT 5 , Item No. 40-CARBIDE TIPPED BAR TURNING TOOLS116 GradeP30-RH-1212. , Item No. 41-CARBIDE TIPPED BAR TURNING TOOLS 116 GRADEP30-LH-1212. , Item No. 42-CARBIDE TIPPED CRANKED ROUND NOSETURNING TOOLS 115 GRADE P30-RH-1212 , Item No. 43-MIRANDA MAKE CARBIDE TIPPED STRAIGHTROUND NOSE TURNING TOOLS 113 GRADEP30-1616 , Item No. 44- CARBIDE TIPPED CRANKED TURNING AND FACINGTOOLS CONFORMING TO ISO 2 111GRADEP30-LH-1212 , Item No. 45-CARBIDE TIPPED CRANKED TURNING AND FACINGTOOLS CONFORMING TO ISO2 111GRADEP30-LH-1616 , Item No. 46-PARALLEL SHANK END MILL CUTTER SIZE 3MM DIA x 10MM LENGTH x 42MM OVERALL LENGTH , Item No. 47- STRAIGHT SHANK END MILL CUTTERS 6MM DIA , Item No. 48-END MILL CUTTER 8 MM , Item No. 49-HSS STRAIGHT SHANK END MILL CUTTERSADDISION 5 MM DIA WITH 5 MM PARALLEL , Item No. 50-HSS PARALLEL SHANK END MILL CUTTER STDSERIES , Item No. 51-ADDISON HSS PARALLEL SHANK END MILLCUTTERS , Item No.52- TWIST DRILL 3MM DIA 2 FLUTES STRAIGHTSHANK MICROGRAIN SOLID CARBIDE COATEDWITH TITANIUM ALUMINIUM NITRIDE TiAlN , Item No.53-TWIST DRILL 6MM DIA 2 FLUTES STRAIGHTSHANK MICROGRAIN SOLID CARBIDE COATEDWITH TITANIUM ALUMINIUM NITRIDE TiAlN , Item No. 54-TWIST DRILL 12MM DIA 2 FLUTES STRAIGHTSHANK MICROGRAIN SOLID CARBIDE COATEDWITH TITANIUM ALUMINIUM NITRIDE TiAlN , Item No. 55-TWIST DRILL 10MM DIA 2 FLUTES STRAIGHTSHANK MICROGRAIN SOLID CARBIDE COATEDWITH TITANIUM ALUMINIUM NITRIDE TiAlN , Item No. 56-END MILL CUTTER 4 MM DIA , Item No.57- 1PARALLEL SHANK CUTTER HSS END MILL AS PERBS 122 1953 IS 6353-1991 , Item No.58-BIMETAL BAND SAW BLADE , Item No. 59- MIRANDA MAKE BIMETAL BAND SAW BLADE COIL

CATEGORY: PVC Shoe Cover (NPCIL) (Q3)

CATEGORY: Parker make O ring one , Parker make O ring two , Parker make O Ring three , Parker make O Ring four , Parker make O Ring five , Parker make O Ring six , Parker make O Ring seven , Parker make O Ring eight , Parker make O Ring nine , Parker make O Ring ten , Parker make O Ring eleven , Parker make O Ring twelve , Parker make O Ring thirteen , Parker make O Ring fourteen , Parker make O Ring fifteen , Parker make O Ring sixteen , Parker make O Ring seventeen , Parker make O Ring eighteen , Parker make O Ring nineteen , Parker make O Ring twenty , Parker make O Ring twenty one , Parker make O Ring twenty two , Parker make O Ring twenty three , Parker make O Ring twenty four , Parker make O Ring twenty five , Parker make O Ring twenty six , Parker make O Ring twenty seven , Parker make O Ring twenty eight , Parker make O Ring twenty nine , Parker make O Ring thirty , Parker make O Ring thirty one , Parker make O Ring thirty two

CATEGORY: Ice Lined Refrigerator (Q3)

CATEGORY: CHESTERTON make STYLE 5100 carbon bush for PHT system BCD CV/BCD reflux CV/Feed CV/Bleed CV

CATEGORY: MANUFACTURING AND SUPPLY OF TG JOURNAL BEARING SHELL FOR H. P. TURBINE REAR END OF SIZE 18" X 9" , MANUFACTURING AND SUPPLY OF TG JOURNAL BEARING SHELL FOR L. P. TURBINE REAR END OF SIZE 18" X 14"

CATEGORY: Fibre Cable for Networking (Q3)

CATEGORY: Ice Cube Machine (Q3)

CATEGORY: Oil Seal For Plunger Pump

CATEGORY: Supply of Parker make" Seal kit" for containment isolation valve EG1 and its actuator. Parker CC no- , Supply of Parker make" Seal kit" for containment isolation valve EG2 and its actuator. Parker CC no- , Supply of Parker make" Seal kit" for Service Cart cylinder, Parker CC no-Y-NAP/SC-SEAL/150- 205