Sand Tenders

Description: CATEGORY: Cement OPC 43 grade in poly bag of 50 Kg each , Sand Coarse conforming to IS 383 to 1970 , Stone aggregate coarse 20mm conforming to IS 383 to 1970 , Interlocking Tiles 60mm thick , Bricks

Description: CATEGORY: INDO SURGICAL EMERGENCY BLANKET 140 X 210 CM , SAND COLOUR CLOTH , ADHESIVE , NYLON ROPE 5 MTR , TARPAULIN

Description: Scrap Us Various Types Of Coal Lumps And Coal Powder Obtain From Floor Cleaning Of Wagons Of Sorts And Sizes. Coal Comprises Sand, Stone If Any Cond. 1. Loading By Purchaser 2. Delivery In Only Rto Registered Vehicles Location:- Open Area In Front Of Power Shop/workshop Bikaner

Description: Cement Bag 43 Grade Opc In Polythene Bags Weighing 50 Kgs,sand Coarse,crushed Stone Aggregate 40mm

Description: CATEGORY: Sixteen Mtr High Mast pole , Two hundred Watt High Mast Flood light , Electrical Panel , Aviation light , Cable Ten SQMM , Cement , Aggregate two hundred mm , Sand , Flood Light one hundred twenty Watt , Electric Cable, Three Core, Copper wires , Installation and Making charges

Description: Supply And Stacking Of Stone Boulders, Smetal 40 Mm, Schips 20 Mm, 10 Mm, And Sand For Pmt Works And Smetal 63 Mm, 45 Mm, 26.5 Mm,

Description: Scrap Rubber Items With Or Without Ms Attachment Of Sort And Sizes Consisting Of Rubber Pad All Types, Side Bearer, Em Pad, Rubber Stair Case, Used Rubber, V Belts, Lower Rubber Washers, Rubber Ring, Escalator Handrail Belt, Lorry Tyre Of Sort And Sizes, Hose Pipe, Sand Pipe With Or Without Ms Attachment And Other Similar Type Of Rubber Item. Location: B By 1

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm, Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120 x 120mm x 2.4m long for column with holes made on the top of coln as per design for fixing G1 Beam. Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 1.85 mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 60 Cm mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 125 RSJ 125 x 70mm G2 3.0m long for beam 2 conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , SHS 6 mm thick size 70x70mm x 1.85m long for G3 Bottom bracing with conforming to relevant IS Make TATA oblique Sail oblique Jindal , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts. , 6mm thick MS plate 100mm x 100mm with a gap of 75mm welded with coln bottom to connect 70mm x70mm SHS with nut and bolts, 04 each. , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , 6mm thick MS base plate of size 150 x150 mm for SHS column including welding, knotching, cutting and nuts,bolts, washer etc. , Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete. , MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1 Kg oblique RM black in colour and shall contain not less than 2 percenttage of carbon black, Sample to be approved before supply. , Red Oxide primer conforming to relevant IS. , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS, Make, Johnson and Nicholson India Ltd, Nerolac Paint and Asian Paint. , Thinner, Sample to be approved before supply. , Dry distemper, Sample to be approved before supply. , Chalk whiting, Sample to be approved before supply. , Paint Brush 4 inch Make, Amar oblique Lucky Sample to be approved before supply. , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame. , Supply of Swivel Bullet proof glass glass 750mm x 500mm size 72 mm thick with fabricated iron frame including necessary locking arrangement in the frame to fix the glass in the loop hole. , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun. , Ply wood 10 mm thick as per requirement for flat surface. , Foundation bolts of 16 mm dia and 250 m long with nut, bolts washer etc.

Description: Lot Consisting Of Condemned Foundry Slag Cake With Rubbles Including Slag Dust, Waste Foundry Sand And Refractory Bricks As Available In The Lot Area Except Loose Ferrous Items. However Ferrous Items Embedded With The Slag Cake, Which Cannot Be Removed Ordinarily By Hand Shall Be Permitted For Loading. Delivery Will Be Given From Road Approaching Point In One Direction Only Note : Purchaser Should Lift All The Material As Available In The Lot Including Rubbles, Ash Content, Mud Etc., While Delivery. Material From The Lot Shall Be Lifted From One End Removing Both Slag And Rubbles By Scooping Both Simultaneously. No Loose Ferrous Items Such As Wheel Cuts, Axle End Cuts, Runners, Raisers, Rail Cuts, Pipes, Angles, Channels, Rods, Sheets Etc., Will Not Be Permitted For Delivery. Purchaser Can Inspect The Materials Thoroughly Before E-auction. Purchaser Are Requested To Take Sufficient Safety Measures While Loading And Purchaser Should Arrange All Safety Equipment For Workers Engaged While Loading Into The Trucks. Delivery Unit : In Mt

Description: Lot Consisting Of Condemned Foundry Slag Cake With Rubbles Including Slag Dust, Waste Foundry Sand And Refractory Bricks As Available In The Lot Area Except Loose Ferrous Items. However Ferrous Items Embedded With The Slag Cake, Which Cannot Be Removed Ordinarily By Hand Shall Be Permitted For Loading. Delivery Will Be Given From Road Approaching Point In One Direction Only Note : Purchaser Should Lift All The Material As Available In The Lot Including Rubbles, Ash Content, Mud Etc., While Delivery. Material From The Lot Shall Be Lifted From One End Removing Both Slag And Rubbles By Scooping Both Simultaneously. No Loose Ferrous Items Such As Wheel Cuts, Axle End Cuts, Runners, Raisers, Rail Cuts, Pipes, Angles, Channels, Rods, Sheets Etc., Will Not Be Permitted For Delivery. Purchaser Can Inspect The Materials Thoroughly Before E-auction. Purchaser Are Requested To Take Sufficient Safety Measures While Loading And Purchaser Should Arrange All Safety Equipment For Workers Engaged While Loading Into The Trucks. Delivery Unit : In Mt