Painting Tenders

Details: Description:- Supply Of Maintainer's Furniture Of Godrej Make Or Superior And Each Set Consist Of(i) executive Revolving Bearing Series Low Back-floating Chair With Normal Arms Cushioned Chair-01 Nos. (ii) Executive Table Size 1650x900x728 Mm With 3 Drawers One Side Locker- 01 No .(iii) Visitor Chair seat & Back Cushion With High Density Foam With Plastic Pvc Handle Capsule Type Painted Back-03 Nos. inspection: Consignee Inspection Charges: None Payment Terms:100% After Supply.

Description: CATEGORY: Broach nerve canal , Endo Z Bur , Tetric powerfill package complete IV A 3 x 3 gm , Miracle mix restorative cement MMR , Choline salicynate Lidocaine Gel Dologel , Injection lignocaine with adrenaline 1 80000 cartridge 2 perc , Hand sanitizer bott of 500 ml , Crown and bridge preparation kit , Neo Endoflex files 4 Percent , Neo Endoflex files 6 percent , Mouth mirror top only , GIC Luting cement , Intermediate restorative material , Calcium hydroxide powder , Hand piece lubricant spray bott of 350 ml , Rotary proglider No 15 , Ribbon Gauze , Savlon 1Ltr Bott , Gum Paints , K File size 06 21 mm set of 06 , K File size 06 25 mm set of 06 , K File size 08 21 mm set of 06 , K File size 08 25 mm set of 06 , K File size 10 21 mm set of 06 , K File size 15 25 mm set of 06 , K File size 20 25 mm set of 06 , Dentsply Rotary protaper gold assorted 21 mm , Dentsply Rotary protaper gold assorted 25 mm , Fiber post 1 point 3 1 point 5 mm , Chlorhexidine mouth wash bott of 80 ml , EDTA Gel for root canal preparation , Miracle mix restorative cement , Dycal , Cement mixing spatula , Cement mixing pad , Spreader , Examination Gloves size small pkt of 100 , Etchant , Bonding agent , Bite registration wax , Endo irrigation needle , Hyflex CM rotary file assorted size 21mm , Hyflex CM rotary file assorted size 25mm , Dental Napkin Paper , Glass ionomer filling material cement , Applicator tip , Polishing and finishing kit , Articulating paper , Polycarboxylate cement , Solution Povidone iodine Bott of 500 ml , Flowable composite kit , Surgical Gloves Size 6 5 , Surgical Gloves Size 7

Description: CATEGORY: MINERAL JELLY AMMUNATION , NAIL BRAD STEEL CUT 25MM X 1 POINT 50MM , NAILS STEEL WIRE ROUND 25MM X 2 MM , NAILS STEEL WIRE ROUND 50 MM X 2 POINT 8 MM , NUTS UNC 2B PREC A STEEL HEX ASL 7 OBLIQUE 1 , BOLT UNC 2A PREC S STEEL HEX HD Z OBLIQUE P 1 , WASHERS PLAIN STEEL ZINC PLATED 6 POINT 6MM , WASHERS PLAIN STEEL ZINC PLATED 11MM , WSH SPG S OBLIQUE C TY B STL N OBLIQUE S 8MM , WSH SPG S OBLIQUE C TY B STL 12MM , WSH SPRI SC TY B STL N OBLIQUE SZ 16MM , PIN COTTER SPLIT STEEL 2 POINT 5MM X 32MM , PIN COTTER SPLIT STEEL 4 MM X 45MM , PIN COTTER SPLIT STEEL 4 MM X 56MM , PIN COTTER SPLIT STEEL 3 PONT 2MM X 25MM , PIN COTTER SPLIT STEEL 5MM X 71MM , SCREWS WOOD SLOTTED CSK HD BRASS NO 8 , SCREWS WOOD SLOTTED CSK HD BRASS NO 4X2 , ELECTRODES WELDING STEEL ARMOUR 4 MM , ELECTRODES WELDING STEEL HIGH TENSILE 5 , ELECTRODES WELDING TOOL TIPPING 3 POINT 15MM , ELECTRODES WELDING HIGH ALLOY STEEL 3 POINT 15MM , WIRE STEEL MILD BRIGHT 4 MM , WIRE STEEL MILD ANNEALED ZERO POINT 56MM , WIRE STEEL MILD GALVANISED 1 POINT 60MM , FEVICOL SR 998 , ADHESIVE SYNTHETIC RESIN ARALDITE AY 105 , TURPENTINE , PAINT RFU PRIMING RED OXIDE , CLOTH HASSIAN MED 102 CM WIDE

Description: Various Type Of Ms & Ci Scrap At Sse (sig/m) Daund Depot Of Pune Division. 1.main Signal Post-28 Nos. 2.signal Base-28 Nos, 3.signal Unit 2 Aspect-17 Nos, 4.signal Unit 3 Aspect-7 Nos, 5.signal Unit 4 Aspect-4 Nos, 6.offset Bracket Main Signal-18 Nos, 7. Route Indicator-18 Nos, 8.shunt Signal Post-27 Nos, 9.shunt Signal Base-27 Nos, 10.shunt Signal Unit-27 Nos, 11.offset Bracket Shunt Signal-14 Nos. Total Lot Qty: 10.420 Mts (approx) Remarks 1. Pakka /kaccha Road Approach Road Is Available. 2.the Weight Has Been Assessed On Approximate & Documentation Basis, Subject To Any Variation During Delivery By Actual Weighment If Any, Will Be The Responsibility Of Custodian. 3. No/ Similar & Other Type Of Material Is Lying Nearby The Lot. (sse/sig/m/dd) Has Assure To Remove The Extra Material Lying Near The Lot. Or Side Assets. 4. The Lot Is Ok For Auction Sale. 5. The Quantity Physically Available. The Lot No & Measurement Has Been / Painted By The Stock Holder. 6. The Quantity Is As Per Ds-8 Note & Ss 11 Has Been Verified Of The Lot. 7. If There Are Any Discrepancies Like Addition, Deletion, Alteration In Material Or In Weighment Or Tampering With The Lot Will Be The Responsibility Of The Stock Holder. Any Weight Difference Between Actual And On Ds-8 Note & Ss 11 Will Also Be Responsibility Of The Stock Holder. 8. The Gas Cutting May Be Allowed For Easy Loading In The Truck. The Pulling Shifting And Lifting To Be Done By The Purchasers 9. Nfs Or Non-descript Material Has Not Be Stocked At Least 15 Mtrs. From The Lot. 10. Scrap Delivery On Actual Weighment Basis On Nearest Govt. Recognized/ Approved Weigh Bridge Only. 11. Bidders Are Advised To Inspect The Lot Material Before Bidding. Location: Sse(sig/m)dd Depot Office Compound

Details: Description:- Periodicalmaintenanceoflcgates(cleaning,oiling,greasing,checkingof components, Replacement Of Worn Out/ Defective Parts I.e., Booms, Pedestals, Drums, Lock Posts, Wire run, Rod Run Etc Other Than In Case Of Accident And Ensuring Proper Functioning Of The Lc Gate As mentioned In Scope Of Work & Schedule Of Activity For Maintenance Of Lc Gates In The Tender document.allconsumablesrequiredmaterialslikenuts,bolts,spindlebolt,oil,grease,paints, flexible Wire, Cement, Sand, Chips Etc. Shall Be Supplied By Contractor Except Boom, Pedestal, Drum, winch, Lock Post, Rodding, A/b Type Foundation, E-type Lock, Cross/vertical Wheels.(1 Numbers = Per Lc gate Per Year)

Description: Total Qty. = 607 Nos. And 01 Set, Description - 1. Voice Card 3 Nos. 2. Dtmf Card 133 Nos. 3. Pd Mux 5 Nos. 4. Psu Card 21 Nos. 5. Rcf 4 Nos. 6. Ddf Frame 4 Nos. 7. Auto Dialing System 2 Nos. 8. Smr Amaraja 4 Nos. 9. Smps Battery Charger 48v 11 Nos. 10. Smr Statcon 9 Nos. 11. Ct Box 20 Pair 6 Nos. 12. Power Supply Unit 6 Nos 13. Control Telephone 83 Nos 14. Magneto Telephone 91 Nos. 15. Auto Telephone 90 Nos 16. Modem 15 Nos 17. Power Supply Unit For Vhf 5 Nos 18. Dtmf Box (empty) 30 Nos 19. Head Qtr Equipment 4 Nos 20. 9u Rack 3 Nos. 21. Empty Paint Drum 2 Nos 22. U-link Panel 14 Nos 23. Coral Mux 13 Nos. 24. Emergency Portable T/p 01 Nos 25. Float Battery Charger 24v10amp 3 Nos 26. Btp 2 Nos 27. Face To Face System 5 Nos. 28. Krone Module (30 Channel) 2 Nos 29. Steel Location Hut 1 Nos 30. Vf Transformer 15 Nos. 31.puncom Charger 1 Nos. 32. Fare Display Board 2 Nos. 33. Gps Clock 1 Nos. 34. Digital Master Clock 1 Nos. 35. Digital Tower Clock 1 Nos. 36. Five Line Arrival/departure Display Board 2 Nos. 37. 4g Fct Phone 4 Nos 38. Vhf Ariel Antenna Accessories 1 Set 39. Socket Box 2 Nos. 40. Coaxial Cable 3 Nos. 41. Amararaja Charger 1 Nos 42. Jointer Tools Kit 25 Items 2 Nos. (remarks:- Material To Be Sold On As Is Where Is Basis And Material Sr. No. 38 To Be Delivered In Set. And Other Materials To Be Delivered In Nos.)

Description: CATEGORY: HDPE laminated Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120x120mm x 2.4m long for column with holes as per tech spec , ISMB 150 RSJ 150 x 75 mm 1.85 mtr long for beam conforming to relevant IS as per tech spec att , ISMB 150 RSJ 150 x 75 mm 60 Cm mtr long for beam conforming to relevant IS as per tech spec att , ISMB 125 RSJ 125 x 70mm 3.0m long for beam conforming to relevant IS as per tech spec att , SHS 6 mm thick size 70x70mm x 1.85m long for with conforming to IS as per tech spec att , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts , 6mm thick MS plate 100mm x 100mm with a gap of 75mm as per tech spec att , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , 6mm thick MS base plate of size 150 x150 mm for SHS column as per tech spec att , Steel Roofing Trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , MS hexagonal nuts Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1.00 Kg per RM black in colour and shall contain as per tech spec att , Red Oxide primer conforming to relevant IS , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS as per tech spec att , Thinner as per as per tech spec att . Sample to be approved before supply. , Dry distemper as per tech spec att. Sample to be approved before supply , Chalk whiting as per tech spec attSample to be approved before supply , Paint Brush 4 inch Make Amar or Lucky Sample to be approved before supply , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet as per tech spec att , Supply of Swivel Bullet proof glass glass 750mm x500mm size 72 mm thick as per tech spec att , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun , Ply wood 10 mm thick as per requirement for flat surface , Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS , Natural sand confirming to relevant IS as per tech spec att , Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS as per tech spec att , Rapidite quick setting liquid. , Integrated water proofing compound. , Drilling machine portable type, electrically driven , Aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden Flat Gurmala , Water leveling pipe PVC 100 mtr , Hand Rivet Gun machine , Drill bit 6mm dia , Drill bit 8mm dia , Drill bit 10mm dia , Tape measuring metallic 30 M , Mason trowel Karchi , Tasla Iron 18 inch , Shovel with wooden handle , Axe Picks with wooden handle , Fawda with wooden handle , Crobar 5 feet long , Rammer with wooden handle of WT 5 AND 10 KG , Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand , Brick Hammer 1,2 Kgs , Cutting plier Insulate 6 inch , Screw Driver 12 INCH with insulated plastic , Digital Clamp Meter , Pipe Wrench 12 inch , Pipe Wrench 18 inch , Adjustable spanner 12 inch , Hacksaw frame with 2 Blade , Hand Gloves Canvas with ISI Mark , Aluminium Sprit level 6 inch , Brick Line , Plumbob

Description: CATEGORY: Gabion Box , Scantling , Planks , PVC pipe , Ceramic Tiles , Non skid tile , White Cement , Water Storage Tank , Diesal Engine Pump 5 HP , GI Pipe , Barbed wire , Galvanized steel Concertina Wire , Angle Iron , Lime , Plywood , Ply wood , Nails 5 inch , Nails 4inch , Nails 3inch , Nails 2point5 inch , Nails 2inch , Nails 1inch , Nails zero point 5 inch , Steel cutter 11inch dia , Steel cutter blade dia 1 feet , Wall mounting Fan , Distemper white , Ceiling fan 48 inch with regulator , PVC watertank , W Beam Crash Barrier , Street Light poles , LED Lights 60watt , Under gound Armoured Cable , Pole Junction Box , Cut out device , Ordinary Cable , Delineators , Street Solar , Lightening Conductor , Iron Door with frame , Iron window with frame , Exaust fan , Binding wire , Welding rod , Tubelight 20 W , Socket 16 Amp with Box , MCCB 42 W 03 Pole , MCCB 42 W 04 Pole , Steel MCV Box , Screw , Galvanised Steel Earth Plate , Modular Switch 6 A with fitting , Modular Socket 6 A , Steel Board Modular , Wall Drilling Machine , Wall Chaser , Mineral Fibre Roof false ceiling , Aluminum Angle , Suspended Ceiling grid 600 mm Cross T , Suspended Ceiling Grid Suspension Wire , Aluminum Door , Aluminum Window , Aluminum ventilator , Colour CGI Sheel , Roof Rain Water Collection Channel 10 inch dia , Rolling Shutter , PVC Elbow , PVC Tee , Self driling screw , Red Clay Weathering tiles , Runner , J Hook With Washer , Nut Bolt , MS Flat , Enamel Paint , Wall Putty , Primer , Scantling 10 ft by 4inch by 4inch , Scantling 10 ft by 3inch by 3inch , UPS 600 VA , Geyser , Brush Cutter , 3HP heavy duty Petrol Chain Saw , Concrete Texture Brush , PU Sealent , PU Sealant Gun For 600 ml sausage , Backer rod , Blower for cleaning

Description: Condemned Diesel Loco No.36142 Wds/6 With Iron, Steel And Non-ferrous. Restricted Items: 1. Complete Wheel Set With Gear Without Axle Box Equal To 06 Sets. 2. Piston Main ( 22 Kg Each) Equal To 06 Nos. List Of Removed Items: 1. Air Brake Valves And Cocks 01 Set. 2. Fttm Blower 01 Number. 3. Radiator Core 01 Number. 4. Lube Oil Pump 01 Number. 5. Radiator Fan 01 Number. Non- Ferrous Unserviceable Items To Be Handed Over To Purchaser: 1. Car Body Cables Equal To 01 Set. 2. Radiator Core 01 Number. 3. Epc, Reverser & Bkt Equal To 01 Set. 4. Traction Motor Equal To 06 Nos. 5. Traction Generator Equal To 01 Nos. 6. Auxiliary Generator & Exciter Equal To 02 Nos. 7. Fpm & Ccem Equal To 02 Nos. 8. Suspension Bearing Equal To 24 Nos. Remark: 1. Restricted Items To Be Returned To The Stockholder In Good Condition By The Purchaser At The Time Of Delivery. 2. Lot No. Is Painted On Loco. 3. Approach Road Is Available Up To The Lot. 4. Hsd Oil And Lubricants If Found To Be Returned To The Stockholder. 5. Loco Is Presently Stabled At Diesel Loco Shed Kurla, After Auction And Before Handing Over, Loco Will Be Placed At Cla Yard For Cutting And Delivery Purpose. Purchaser Is Advised That Loco Will Be Placed Only After Certification Of Line By Sse/pway/mnkd And As Advised By Sse/d/cla. 6. After Purchaser Submit All The Documents And D.o. After Auction To Adme/d/cla Office, Sse/d/cla In Consultation With Sse/p.way/mnkd Will Decide The Date Of Placement Of Loco At Cutting Yard And Only After Handing Over Of Loco Will Be Done. 7. Purchaser Has To Ensure Safety Of Railway Assets And His Labour While Working In Railway Premises. If Any Losses Arise Due To Negligence, The Purchaser Will Be Fully Responsible. 8. Purchaser Has To Personally Visit The Site And See The Lot. No Claim Will Be Entertained After Sale Of Lot. 9. Purchaser Has To Keep Enough Water/ Sand At The Cutting Site. 10. Lot Is Ok For Sale. Location: Presently Stabled At Diesel Loco Shed Kurla. Stockholder: Adme D Cla.

Description: Dismantling Of Abandoned/condemned Railway Shed No. 8 Consisting Of - Columns, Base Plate, Top Plate, Truss, Cantilever, Cross Bracket, Plate/cleat, Purline, Side Angle, Cross Bracing, Angle Above Gate, Flat, Ac Sheet, G.i.sheet, Shutters. Remarks - Lot Is Approachable By Pakka Road. The Delivery Of M.s. Ferrous/gi Sheet/shutters Will Be Made On Actual Weighment Basis Only At Hbhr Depot. The Weighment Will Be Done At Hbhr Depot. The Items Mentioned In The Description Only Will Be Delivered. Delivery Of Ac Sheet (1787.3m2 (approx.) Will Be Done On As Is Where Is Basis. No Claim Will Be Entertained For Any Shortage Of Ac Sheets. Lot Number Is Exhibited/painted On The Shed. The Quantity Is Worked Out On Approximate Basis. In Case Of Excess Quantity Of Ferrous Entire Quantity To Be Lifted By The Purchaser By Payment For Difference Of Actual Quantity Delivered With Lot Quantity. Materials Like Electric Wires, Fittings & Cables And Other Such Kind Of Materials Available Inside The Shed Which Is Not Within The Scope Of Lot Description, Shall Be Handed Over By The Purchaser To Custodian. The Items Used In Fencing Around The Structure Such As Rail, Tie Bar, Jali, Stone, Bricks, Wooden Pillar Or Any Other Items And Similar Type Of Material Lying Nearby The Structure/lot Will Not Be Delivered. Dismantling & Cutting Is Allowed For Easy Loading Purpose At The Risk & Cost Of The Purchaser. Dismantling Is Permitted Upto Ground Level Only. The Purchaser Should Ensure That During Dismantling & Cutting Operation No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property. The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Dismantling. Extra Precaution To Be Taken If There Are Trees Near The Structure Or Its Branches Are Spread Over The Same. Train Operations And Other Railway Work Should Not Be Disturbed/affected. All Debris Should Be Cleared Before Completion Of Delivery. The Purchaser Is Advised To See The Lot Site/content Before Bidding. No Claim Will Be Entertained After Sale Of Lot. Lot Is Ok For Sale With Above Observations. Qty - Ferrous - 70.042 Mts. (approx.), G.i. Sheet - 0. 628mts. (approx), Shutter - 0.254 Mts. (approx). Total Qty (ferrous) - 70.924 Mts. (approx). Location - Wadibunder Yard. Stock Holder - Sse (works) Wadi Bunder. Note - Free Delivery Period Up To 80 Days. Note - Original Lot No. 520223101006.