Paint Tenders

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- 1.marking And Cutting Of 25 Mm Plate, Channels, Angles To Size As Per The Existing structure2.fabricatingthebaseframewithrequiredmountingsupportsfromthefloorlevel 3.matching Of Escapement Arm, Shaft With Bearings. 4.fabrication Of Kicker/escapement Assembly supporting Base Structure. 5.removal Of The Existing Loader After Removal Of Pneumatic Cylinder And pneumatic Connections 6.cleaning The Area Of All Accumulated Debris. 7.fixing Of Fabricated Structure in Place With Rigid Foundation And Align The Escapement Arm With Both Receiving And Dis-charging end Conveyor After Assembly Of Shaft And Bearings With Back Stopper Arrangement. 8.connecting The pneumatic Cylinder, Valves And Pipeline To The New Loader Station With A Frl Unit. 9.full Weld The completestructurewithsupports.provideguiderails,flangeguidesinplace.10.checkthe equipment With Wheel For Smooth Flow Of Wheels And Weld Limit Switch Bracket For Fixing Electrical limit Switches At Required Places For Auto Mode. 11. Paint The All Replaced Structures, Column With onecoatofred-oxideand2 Coats Of Apple Green Paint. Note: A) All Mounting Holes For Pivot bearings, Adjustable Guides, Cylinders Should Have Drilled Holes. B) All Pneumatic Pipe Lines Should Be clamped Using Suitable Pipe Clamps. Rates Are Inclusive Of Gst

Details: Description:- Signallingexecutionsor(includinggst)-scopeofworkincludestrenching, transportation And Laying Of S&t Cable, Mechanised Drilling/ Micro Tunnelling Under Important/ Busy metal/concreteroad/railwaytrackandlayinggipipe,boringandpullingcable,supply, transportation And Fixing Of Galvanised Iron Pipe And Drawing Of Cables Inside The Pipe, Hiring Of jcb/hydra/poclainmachine(ingoodworkingcondition)forlevelling&dressingofground/ dismantling Structures, Erection Of Full Location Box, Painting Of Location Box, Lettering / Numbering termination Particulars, Equipments Names Etc. Inside Location Box, Transportation, Installation Of signal Post For Macls (2-aspect And 3/4 - Aspect), Transportation And Fixing Of Junction Type Route indicator,transportation,installationandpaintingwithretroreflectivetapeof slb/bslb/legend/stop Board Etc., Painting Of Two Coats Of Synthetic Enamel Paint Over One Coat Of primer On Main Signal Post With Signal Units, Surface Base And Complete Fittings & Shunt Signal Post with Signal Unit, Surface Base, Lettering / Numbering Termination Particulars, Equipments Names Etc on Signals/track Lead Junction Box, Transportation, Grouting/erection, Wiring As Per Approved Wiring diagram Of 19" Relay Rack/composite/q-series Relay Rack, Transportation, Installation And Charging of Secondary Cell 2 V (2 Volt 80ah/ 2 Volt 120 Ah/ 2 Volt 200 Ah), Transportation And Installation Of electric Point Machine, Painting & Lettering Of Point Machine With Ground Connections Complete And point Junction Box, Painting & Lettering Of Electric Lifting Barriers (elb), Installation Of Maintenance freeearthingandconventionalearthing,routingandconnectingalltheequipmentinthe equipment/relay Room To Seeb With 10 Sq. Mm Copper Cable, Provision Of Cement Concrete Enclosure for Earth Electrode As Per Approved Drawing, Cement Concrete For Miscellaneous Items.

Details: Maintenance Of Staircase And Painting At Vadakku Theru Oht In Thazhakudy Town Panchayat

Details: Painting of different EHV transmission line tower structures complete 400KV, 220KV &132KV by surface preparation, application of one coat of primer and two coats of anti corrosive aluminium paints as per standard spec under jurisdiction of Durgapur 400kv Area office, WBSETCL.

Details: -Applying creative painting on the compound wall of Anjuman E Islam College in A Ward.

Details: Repair Of Plaster, Distempering, Painting, Wood Work And Aluminum Work, Sanitary Installation Etc.

Details: Painting Of Dhono Dhanye Setu (alipore Bridge) Over Tollys Nallah At Alipore Kolkata.

Details: Painting Of Dhono Dhanye Setu (alipore Bridge) Over Tollys Nallah At Alipore, Kolkata.

Details: - Painting/Lighting (Internal/External) with Minor Repair Works in SDH Dasuya District Hoshiarpur