Locker Tenders

Details: Werr Rmgs Tsh-10, Part No. 104p82026 , Main Shaft En- 8, Part No. 201p382027 , Stud Main Casing En8, Part No. 301p82041 , Lanternal Ring Gm, Part No. 209p82035 , nut For Bearing Housing For Tsh-10 Pump, Part No. 305p82041 , Stuffing Box Ci Tsh 203p82029, Part No. 203p82029 , Nut For Main Casing Tsh10 Pump, Part No. 302p82041 , Stud Inspection Cover En8, Part No. 311p82041 , Breg Cover Imp Side Ci 204p82030 Tsh-1, part No. 204p82030 , Pump Body Assy Wearing Ring,insp cover, Part No. 406p82041 , Stud For Breg House 304p82041, Part No. 304p82041 , Stuffing Box Bush tsh10, Part No. 211p82037 , Stud Gland En8, Part No. 307p82041 , Breg Cover Moy Side 205p82031techno, part No. 205p82031 , Oil Seal For Bearing Nde Tsh 10 pump Big, Part No. 403p82044 , Impeller Enclosed For tsh10 Pump, Part No. 101p82023a , Sleeve Nut Impeller bolt Impeller Locking Bolt Aisi-410, Part No. 212p82038 , Split Gland Gm For Tsh-10 Pump, Part No. 207p2033 , Suppt. Leg 213 P 82039, Part No. 213p82039 , pump Body Assly. For Tsh-10 Pump, Part No. 102p82024 , set Of Domed Nut339p82041, Part No. 339p82041 , gland Plate M.s., Part No. 208p82034 , C.i.bearing housing, Part No. 202p82028 , Shaft Sleeve Bush, Aisi 410, Part No. 210p82036 , Motor Side Liquid deflector., Part No. 206p82032a , Oil Seal Small Tsh 404p82044, Part No. 404p82040 , Nut For Gland For tsh-10 Pump, Part No. 413p82041

Details: 51124129 Ic Pldc20g10-30dmb M/s. Cypress , 86999730 Screw, Cap Head, Hex Socket Recess, Full Sh, P/n: Ms16995-30. M/s. Hardware Speciality Compan , 58201350 Conn Rf Recp Jack Pcb Mmcx Smt, Stra, , P/n: 90mmcx-s50-0-55/119 Oh, M/s. Huber Suhner Or , 58202303 Meter Dynatime Dc Series, P/n: D16c8e-630, , M/s. L3 Communications Narda Microwave W , 58202313 Oscillator 125mhz 3.3v T&r, P/n: Vfxo321- Dgel125mhz, , M/s. Cts Valpey Corporation , 58202323 Module Optical Trnscvr 850nm Lc 4gb/s, P/n: Fte8504k1lty, , M/s. Fastener Technology Corp , 58204050 Insert, Helical Coil, Free Running, Tangless, Notched Ends, Non Locking, Coarse Thread, Right , 58204052 Insert, Helical Coil, Free Running, Tanged, P/n: 1191-3cn0190s M/s Emhart Technologies Inc. , 58204075 Insert, Helicoil, Freerunning, Tanged, P/n: 1084- 5cn0050, M/s. Emhart Technologies Inc. / M/ , 58205142 Ultra-low Phase Noise Lvpecl, Lvds Buffer & Translator P. No: Azs10qgr1: M/s: Arizona Microtek , 86999335 Washer Flat Metal Round General Purp, P/n: Ms15795-802, M/s. Hardware Specialty Company, , 86999438 Screw, Machine, 100 Deg. Flush Head, Crucif, P/n: Nas662c2r16, M/s. Wesco Aircraft Hardware C , 86999455 Rivet, Blind, 100 Deg. Flush Head, Partial, P/n: Ccr264cs-3-04, M/s. Cherry Aerospace Fasteners , 58200874 Conn Circ Dust Cap Antistatic 6-shl, P/n: Sec-6; Make: M/s. Caplugs Div Protective Closures , 58002477 Conn Access Ring 6.5mm/3mm For Chain/wire, P/n: 4.13. 00615-5 M/s Huber Suhner. , 51129056 40 Pin Socket Connector, P/no: 222y40m12l, M/s. Nicomatic

Details: Category: Drape Surgical Disposable For Eye Surgery 100cmx 70 Cm with Adhesive Area And Attached Pouch In Pre Sterilised pack Point , Sterile Eye Patch With Adhesive Disposable , silicon Tire Pre Sterilized 7mm 276 Series Disposable , bandage Contact Lenses , Drape Mini With Pouches For intraocular Injection Of 41x41 Cm , Ear Buds Pack Of 100 buds , Hydrophobic Foldable Iol With Refractive Index 1 Point 55 And Pmma Blue Haptics 10 Degree Angulation , Meroseal sponge Pva Packet Of 5 Spears , Orbital Conformer Size from 20 To 26 For Right Eye , Orbital Pmma Conformer Size from 20 To 26 For Left Eye , Orbital Pmma Implant Size From 16 To 20 Mm , Precut Ophthalmic Surgical Drape Size 100 Cm x 80 Cm With Pouch , Silicone Bands In Pre Sterilised disposable Pack 2mm Wide 240 Series , Silicone Tire Pre sterilised 276disposable , 20g Mvr Knife , Disposable chopper With 20 Degree Angulation , Disposable Dialer 110 degree Forward Angulation , Disposable Endolaser Probes 23g Straight For Quantel Green Laser System Should Fit through 0 Point 6 Mm Incision , Disposable Endolaser Probes 25g Straight For Quantel Diode Laser Point , Disposable endolaser Probes 25g Straight For Quantel Green Laser should Fit Through 0 Point 5 Mm Incision , 26g 1 Oblique 2 inch Disposable Needle , Mini Monaka Stent For Ophthalmic canalicular Surgery , Syringe 1 Ml With Detachable 30 G Or 26 G Needle Sterile The Syringe Should Be Sterile Individually packed With A Removable Attached Needle And Markings In 10 Divisions Per Ml Point , Disposable Dialer For Cataract surgery , Disposable Self Retaining Eye Speculum , disposable Lims Corneoscleral Forceps , Suture Tying Curved forceps For Eye Surgery Titanium , Suture Tying Straight forceps For Eye Surgery Titanium , Disposable Baraquer needle Holder , Disposable Vannas Capsulotomy Scissor , corneal Scissors Titanium , Sterile Surgical Gloves Size 7 powder Less , 25g Fitnesse Flex Loop , Sterile Surgical gloves Size 7 1 Oblique 2 Powder Less , Disp Albama forceps , Disp Needle Holder Locking

Details: Es6031d-5050814000 Washer Copper , Es6031d5050835000 Waser Copper , Es6031d-7405071000 Oil Seal , Es6031d-7407706000 Gasket , Es6031d7426505000 O Ring Rubber , Es6031d-7432412000 Set Of Oil Seal 19by30 By 7 For Aroto G 15sp Ffp , Es6031d-7903109000 Outside Spring , Es6031d7508411000 Gasket 138by138by2mm , Es6031d7526719000 Barring Gear Air Outlet Connect , Es6031d-7530404000 Flexmaster Conn Pipe 60 3mm Od , Es6031d-7551901000 Air Cooler Outlet Conn Hose , Es6031d-7551942000 Governor Speed Setting Air Inlet Connection , Es6031d-7902906000 Exhaust Valve Seat , Es6031d-7904628000 O Ring , Es6031d79046115000 Plunger Spring , Es6031d-7904625000 Fuel Pump Filter , Es6031d-7908821000 Oval Joint , Es6031d-7915237000 Loctite , Es6031d-7909304000 Banjo Bolt , Es6031d-8019205000 Piston Ring Compression , Es6031d-50037125000 Self Locking Nut , Es6031d-5050810000 Copper Washer 12 By 18 , Es6031d-5054005012 Spring Dowel Pin , Es6031d7426963000 Bearing Bush , Es6031d-7425134000 Gasket , Es6031d-7432641000 Bush Dia 22 By 26 14 , Es6031d-7527134000 Flexmaster Conn Gm 1006 038 Pipe 48 3 Od , Es6031d-7902934000 Nut , Es6031d7904115000 Ring D164 3 5d 6 531 60c7 , Es6031d7531208000 Round Joint , Es6031d-7550311000 Thermostat Element 74 By 82 Deg C , Es6031d7902107000 Con Rod Small End Bush , Es6031d7904004000 Washer , Es6031d-7904006000 Piston Ring , Es6031d-7904608000 Barrel Cap , Es6031d7904404000 Spring , Es6031d-7905012000 Ball Bearing , Es6031d-7913508000 Intermediate Pinion , Es6031d7248022000 Joint , Es6031d-7230642000 Gasket

Details: U-clamp Size- 1 By 2 Inch , U-clamp Size- 1 Inch , Uclamp Size- 2 Inch , Magnet V-block, Size-1 Inch With locking Clamp , Photo Imaging Paper, Size- A4 Size, qty In Packet , Safety Belt Web Sling, Capacity- 3 ton, Length- 4 Meter , Filler Wire, Moc-316l Size- 1 mm, Qty In Roll , Filler Wire, Moc-316l Size- 1.6 Mm, qty In Packet , Filler Wire, Moc-316l Size- 2.4 Mm, Qty in Packet , Filler Wire, Moc-304 Size- 1.6 Mm, Qty In packet , Filler Wire, Moc-304 Size- 2.4 Mm, Qty In packet , Filler Wire, Moc-309 Size- 1.6 Mm, Qty In packet , Filler Wire, Moc-309 Size- 2.4 Mm, Qty In packet , Hss Tap And Die Set, Size- M14x 1.5mm , analog Pressure Gauge, Dial- 6 Inch End connection- 1by2 Inch Range- 25 Bar , Analog pressure Gauge, Dial- 6 Inch End Connection- 1 By 2 inch Range- 50 Bar , Analog Pressure Gauge, Dial- 6 inch End Connection- 1 By 2 Inch Range - 100 Bar , analog Pressure Gauge, Dial- 6 Inch End connection- 1 By 2 Inch Range - 160 Bar , Analog pressure Gauge, Dial- 6 Inch End Connection- 1by2 inch Range - 200 Bar , Analog Pressure Gauge, Dial6 Inch End Connection- 1 By 2 Inch Range - 400 Bar , hot Glue Gun With 30 Nos Of Glue Stick, Power200w , Pipe Wrench, Size- 18 Inch , Vacuum Pump, capacity-1 2 Hp , Rubber Mat, Size- 1500x1000x25mm , air Plasma Cutter Welding Machine With accessories , Power Hacksaw Machine With 10 Nos of Spare Blade, Round Cutting Capacity- Min 300mm, cutting Blade, Size- 400x32x16mm, Number Of Speed strokes- 3 , Coolant For Power Machine Volume-5 litre , Magnetic Drill Machine With Drill Bits,

Details: Description:- Supply, Installation, Commissioning Of 11kv Compact Sub-station Consisting Of The following: 1. Transformer: 500kva 11kv/433v Dyn11 Oil Filled Hermatically Sealed Transformer With corrugated Wall And Without Conservator Type Design & Top Normal Porcelain Bushing For Ht And Lt with Off Load Tap Changer Of Range + 5% To -5% Insteps Of 2.5%. Losses (as Per Is 1180 Energy efficiency Level 2) Impedance Shall Be 4.5% (is Tol.) Temperature Rise Limits For Oil/winding - 40/45 degrees 2. Ht Switchgear: 11kv 630amps 21ka For 3 Sec. Sf6 Insulated Non-extensible Compact switchgear (type Ccv) Consisting Of Two Nos. Of Fixed Manual Load Break Switches And One No. fixed Manual Vacuum Circuit Breaker In Sf6 Insulated Stainless Steel Enclosure With Series Trip, 24 voltdcauxiliarypowersupplysystemwithbatterybankandbatterycharger,selfpowered microprocessorbasednumericalovercurrentandearthfault(idmt+inst.)relayprotection. interconnection Between Ht Switchgear And Transformer Shall Be Using 1c X 3r X 95 Sq.mm Al. Un- armoredxlpecable. 3. Lvs Panel - 800amps Aluminium Bus-bar (100% For Phase & 50% For neutral, Current Density- 1 Amp/sqmm) Lt Panel Made Up Of 1.5/2 Mm Thick Crca Sheet. 4. incomer From Transformer: 800amps 433v 65ka 4p Fixed Manual Air Circuit Breaker (acb) With microprocessor Based Release For Over Current, Short Circuit And Earth Fault Protection- Pr 121. 5. outdoor Enclosure: Outdoor Type Enclosure Having Construction Of Galvanised Sheet Steel Having 2mm Thickness For Load Bearing Member And 1.5mm Thickness For Non Load Bearing Members With 4 mmbaseframe.theenclosureshallhaveip54degreeofprotectionforht<switchgear compartment & Ip23 Degree Of Protection For Transformer Compartment. The Enclosure Exterior Shall be Powder Coated (colour Light Gray & D.a. Gray). Each Compartment Will Be Provided With The Door and Pad Locking Arrangement. The Compartment Illumination Lamp With Door Operated Switch Shall Be providedformv&lvcompartment. The Installation And Commissioning Work Should Be As Per direction Of Site In- Charge And As Per Enclosed Specification No. Sdee/gh/spn/150 Dtd. 19-03-2021.

Details: BOQ ITEMS: Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing (1 Cement , 2 coarse sand (zone III), 4 graded stone aggregate 20 mm nominal size) , Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landing, balconies and access platform , Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts, Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more. , Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in a) Cement mortar (1 cement, 6 coarse sand) , 12 mm cement plaster of mix (1 cement, 4 fine sand) , Neat cement punning. , Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by EIC in skirting, risers of steps and dados over 12 mm thick bed or cement Mortar (1 cement, 3 coarse sand) and jointing with grey cement slurry, 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , White washing with lime to give an even shade. a) Satna lime wash on walls with one coat. , Removing white or colour wash by scrapping and sand preparing the surface smooth including necessary papering and repairs to scratches etc. complete, Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. One or more coats on old work , Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied, 3.84 kg per 10 sqm) , Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. One or more coats on old work , Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, One or more coats on old work , Providing and fixing soil, waste and vent pipes 100 mm dia, Sand cast iron S and S pipe as per IS 1729 , Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC, Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. , Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of EIC. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. , Cement concrete flooring (1 cement, 2 coarse sand, 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate, 1.5 mm thick decorative laminated sheet , Labour for fitting and fixing G.C.l. or C.A. sheet roofing in proper slope including the cost of J or L hooks, limpet Iand bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of EIC., Servicing of rolling Shutters, Rolling shutter made of 80mm x 1.25 mm machine rolled laths , Servicing of rolling Shutters, Top cover for rolling shutters 1.25 mm thick metre , Servicing of rolling Shutters, 27.5 cm long wire spring grade No. 2 for rolling shutters, Servicing of rolling Shutters, Ball bearing for rolling shutters

Details: CATEGORY: 6 Module Pvc box , 8 Module Pvc box , 12 Module Pvc box , 6 Module sheet , 8 Module sheet , 12 Module sheet , switch 10 Amp , switch 20 Amp , Socket 10 Amp , Socket 20 Amp , Two way switch 20 Amp , 2 Module swich 25 Amp , 2 Module Fan Regulator , Surface Mounted Ceiling light 15 watt , Ceiling Round light 12 w , Fan Capacitor 2.5 MFD , Pvc Batten 32 mm , Pvc Batten 25 mm , Pvc Pipe 25 mm , Pvc Bend 25 mm , J.B 25 mm , Pvc Gitti 6 mm , Batten Gitti , Pvc Saddle 25 mm , Isulation tape , Flood light 50 watt , Flood light 150 watt , Flexiable Pipe 25 mm , Cable FR LSH 2 core zero point zero seven five sq mm of Copper , Cable FR LGH 3 core One Point Five sq mm of Copper , Cable FR-LSH 3 core Two Point Five sq mm of of Copper , Cable FR-LSH 3 core 4 sq mm of Copper , Cable FR-LSH 3 core 6 sq mm of Copper , Aluminium cable 4 core 10 sq mm armoured , Copper Ring Type Thimble 16 Sq mm , Copper Ring Type Thimble 35 Sq mm , Aluminium Thimble Ring Type 6 x 10 Sq mm , Aluminium Thimble Ring Type 6 x 16 Sq mm , Aluminium Thimble Straight Type 10 Sq mm , Aluminium Thimble Straight Type 16 Sq mm , Aluminium Thimble Ring Type 25 Sq mm , Aluminium Thimble Ring Type 35 Sq mm , Aluminium Thimble Ring Type 50 Sq mm , Aluminium Thimble Ring Type 95 Sq mm , Aluminium Thimble Ring Type 120 Sq mm , Aluminium Thimble Ring Type 150 Sq mm , Aluminium Thimble Ring Type 185 Sq mm , Aluminium Thimble Ring Type 240 Sq mm , Aluminium Thimble Ring Type 300 Sq mm , Aluminium Thimble Ring Type 400 Sq mm , Fan Bearing 6201 , Fan Bearing 6202 , Bearing Puller , Red Gel Grease , Ht Tape , Silca Gel Transformer , Steel wire , Panel lock Power coated pin type , Panel lock Push pin type , Aluminium Thimble pin Type 4mm Sq mm , Aluminium Thimble pin Type 6 Sq mm , Aluminium Thimble pin Type 10 Sq mm , Aluminium Thimble pin Type 16 Sq mm , Aluminium Thimble U Type 2.5 Sq mm , Aluminium Thimble U Type 4 Sq mm , Aluminium Thimble U Type 6 Sq mm , Aluminium Thimble U Type 10 Sq mm , Copper Thimble Ring Type 6 x 2.5 Sq mm , MCB SINGLE POLE 6 AMP TRIPING RANGE -C , MCB SINGLE POLE 16 AMP TRIPING RANGE -C , Extension Borad , Plug Top 6 amp , Plug Top 16 amp , Fan Clamp , Geyser Element 2000W , Themostate , Ovicart 30A 3Way Bakelite Connector black , Charcoal , Salt , Coolant DG , L -Key Scerw 8 mm x 2 inch , L -Key Scerw 5 mm x 2 inch , Street Light Pole Mcb Box Closed Plate , Digtal timer Switch cat no 67DDT0 -110 V -240 V AC , Battery Water , Sleev 4 mm , Driver Led 40 watt Zero Pint Seven Amp Philips Xitanium 45 - 58 v Dc , Mcpcba 16 Led Seoul 3535 4000 cct size 102 and half 5 x 102 and half mm , Battery terminals , Gi Nut Bolt with washer 8 x 40 mm , Gi Nut Bolt with washer 10 x 50 mm , Gi Nut Bolt with washer 6 x 35 mm , GI Strip 25 x 5 mm , Bakelite Connector Plate 63 amp 4 Bolt Type 3PH , Wire 1.5 sqmm single core copper FR-LSH , Wire 2.5 sqmm single core copper FR-LSH , Wire 4 sqmm single core copper FR-LSH , Wire 6 sqmm single core copper FR-LSH , Meco 27 Auto Digital Clamp Meter 600 amp , 66 KV Line Gloves , 11 kv Line Gloves , 66 Line Discharge Rod , Tool Bag , Nose Plier , Plier , Screw Driver 2 in one with Sleev 12 inch , Screw Driver 2 in one with Sleev 6inch , L- Key Set , Hack saw Blade double side , Grees Gun , Totta Wranch , Slide Wranch 12 mm , Slide Wranch 8mm , oil kuppi , Pipe Wranch Small Side , Ring Snanner Set , Screw Driver Kit , Hammer 250 gm , Thimble Crimping Tool upto 10sqmm

Details: CATEGORY: TRM-54 1320TPH , Sch20_100244815_200_M5501156526_SEAL 30 TRF TRM-54 1320TPH , Sch21_100244815_210_M5501156527_FEMALE CLEVIS 31 TRF TRM-54 1320TPH , Sch22_100244815_220_M5501156529_HYDRAULIC CYLINDER 36 TRF TRM-54,1320TPH , Sch23_100244815_230_M5501156531_HOPPER SIDE LINER 38 TRF TRM-54 1320TPH , Sch24_100244815_240_M5501156532_HOPPER TOP LINER 39 TRF TRM-54 1320TPH , Sch25_100244815_250_M5501156533_REAR TOP COVER 40 TRF TRM-54 1320TPH , Sch26_100244815_260_M5501156534_TRAMP POCKET TRF GRANULATOR TRM-54 , Sch27_100244815_270_M5501156535_TRAMP POCKET ROOF,42,TRF,TRM-54,1320TPH , Sch28_100244815_280_M5501156536_TRAMP POCKET LINER,43,TRF,TRM-54,1320TPH_ , Sch29_100244815_290_M5501156537_RTR LOCK NUT GUARD 45 TRF TRM-54 1320TPH , Sch30_100244815_300_M5501156538_UPPER FRONT LINER 47 TRF TRM-54 1320TPH , Sch31_100244815_310_M5501156539_UPPER FRONT LINER 48 TRF TRM-54 1320TPH , Sch32_100244815_320_M5501156540_UPPER TOP LINER 49 TRF TRM-54 1320TPH , Sch33_100244815_330_M5501156541_UPPER TOP LINER 50 TRF TRM-54 1320TPH , Sch34_100244815_340_M5501156542_UPPER REAR LINER 51 TRF TRM-54 1320TPH , Sch35_100244815_350_M5501156543_UPPER REAR LINER 52 TRF TRM-54 1320TPH , Sch36_100244815_360_M5501156544_LOWR REAR SIDE PLATE TRF TRM-54 1320TPH , Sch37_100244815_370_M5501156545_LOWR REAR SIDE PLATE TRF TRM-54 1320TPH , Sch38_100244815_380_M5501156546_LOWR FRNT SIDE PLATE TRF TRM-54 1320TPH , Sch39_100244815_390_M5501156547_LOWR FRNT SIDE PLATE TRF TRM-54 1320TPH , Sch40_100244815_400_M5501156573_HOPPR SIDE LINR REAR TRF TRM-54 1320TPH , Sch41_100244815_410_M5501156574_HOPPER LINER 87 TRF TRM-54 1320TPH

Details: CATEGORY: Supply of spare Relief Valve part no A3801 000 0000 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GUIDE part no 103359 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPRING WASHER part no 103478 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare ADJUSTING.BOLT part no 103479 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare LOCK NUT part no 103480 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SET SCREW part no 104150 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC INSERT part no 136980 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE RING part no 137302 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare DISC HOLDER part no 147158 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare RETENTION CLIP part no 147601 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare GASKET SET part no 108305 A for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare SPINDLE ASSY part no S60668 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506 , Supply of spare NOZZLE part no 102701 for BFP lube oil system. Model 1.5 H 3 JLT JOS E 15 S J Serial no 201501506