Wood Tenders

Description: Cut Up Iron And Steel Scrap Of Condemned Icf Bg Coaches, 02=04 Units With Non ¿ferrous, Wood, Pvc And Other Coach Items Attachment Excluding Complete Bogie Assembly Coach No. 04425 Wgs /ecr & 024110 Gs/ecr Condemnation Details , Built Up Year 08/2004 And 02/2002 , Place Of Condemnation Bandikui Yard Jp Division. Exluded Items List As Per Pcme Nwr Crse Chg Nwr L.no. Nwr/hq/m/c&w/24/loose Dated-22.12.2021 Coach Items:-1. Irs Side Buffer Casing For Coaching Stock Qty. 08 Nos = Gross Wt. 0.32 Mt, 2. Buffer Plunger In Riveted Qty. 08 Nos= Gross Wt. 0.32 Mt, 3. Draw Hook Qty. 04 Nos.= Gross Wt. 0.12 Mt, 4.draw Bar With Castle For Draw Gear Arrangment Qty. 04 Nos= 0.08 Mt, 5. Distributor Valve Without Common Pipe Bracket Qty. 02 Nos= 0.1 Mt, 6. Auxiliary Reservoir 200 Ltrs Qty. 02 Nos.=0.2 Mt, 7. Centre Pivot Pin Qty. 04 Nos.= 0.2 Mt, 8. Draft Key Qty. 04 Nos.= 0.08 Mt, 9. Enhanced Capacity Screw Coupling Assembly Qty. 04 Nos.=0.2 Mt, 10. Wearing Piece For Side Bearer Qty. 08 Nos.= 0.024 Mt, 11. Buffring Spring Parting Plate Size-41x178x5 Mm Qty. 32 Nos.= 0.16 Mt Total Coach Itmes Net Weight= 1.804 Mt, Bogie Items 17. Bogie Complete With Wheel Set Assembly With All Fitting (1. Brake Beam, 2. Brake Block Hanger, 3. Axle Box Hosing, 4. Lower Spring Seat, 5. Equalising Stay For Lower Spring Beam, 6. Pull Rod Size-32x125x524mm, 7. Lower Spring Beam For Non Ac16t, 8. Anchor Link, 9. Double Acting Hydraulic Shock Absorbers, 10. Bg Coaching Axles 16.25 Tonnes Rough, 11. Bg Coaching Wheels, 12. Helical Spring For Axi Box(nac), 13. Helical Spring For Bogie Bolster, 14. 203 Mm Air Brake Cylinder With Slack Adjuster, 15. Adjuster For Brake Block, 16. Bogie Frame Arrangement) 04 Nos.= 24 Mt Note:-wearing Piece 04 Nos And 16 Nos Dashpot Spring Available With Sse/c&w/bki And Bio-tank Not Available With Coach. Total Weight Of Excluded Item= 25.804 Summary Of Saleable Quantities Of Condemned Coaches (all Weights In Tones) (coaches No. 024110 & 04425) Type Gs/ecr & Wgs/ecr= Tare Weight=73.390 Mt, Water Tank + Alternator + Fan + Battery (removed By Workshop)= 02.072 Mt, Effective Tare Weight= 71.318 Mt, Excluded Item Weight= 25.804 Mt, (floor Type Boord) Total Deducation Weight= 27.876 Mt, Net Saleable Weight= 45.514 Mt, Total Saleable Qty.(approx Weight In Mt)- S/steel =0.264 Mt, Aluminum+(electrical Aluminum) (1.334+0.024)=1.358 Mt, Rubber= 0.024 Mt, Wooden= 04.320 Mt, Electrical Copper=0.090 Mt, Electrical Lead= 0.340 Mt, Ferrous= 39.118 Mt

Details: Title: Framework Agreement For Artificial Turf Coatings With Organic Infill (natural Infill) 2025-2026 description: In Helsinki, An Estimated 3–6 City-owned Artificial Grass Fields Will Be Renewed Each Year. The Areas Of The Fields Are Approximately 7,500 M2 – 15,000 M2 Per Field. The Framework Agreement Is Related To The City Of Helsinki's Artificial Turf Field Projects, Which Will Be Implemented In 2025 And 2026. The Estimated Need For New Artificial Grass Coatings Is 40,000–50,000 M2theoretical Per Year During The Contract Period. The Aim Of The Procurement Is To Clarify The Selection And Procurement Of Artificial Turf Coatings For Future Artificial Turf Field Construction Projects, Taking Into Account: - The Artificial Turf Coating Must Comply With The Eu Regulation Banning The Use Of Microplastics - A Wide Range Of Products For Different Applications And Application Levels, Making It Easier To Select The Coating For Each Field - Clarifying And Speeding Up The Procurement Of Artificial Turf Coatings - Cost-effectiveness And Future Volume The Procurement Will Be Carried Out In Three Sections, In All Of Which The Infill Is Chemically Unmodified Natural Infill Without Polymer Filling Or Biodegradable Filler (fifa Definition “natural Infill”). All Sections Include Also Shock Pad Below. Section 1: Artificial Turf Coating Where Organic Performance Infill Is Wood Crumbs - One Supplier Is Selected For This Section. Section 2: Artificial Turf Coating Where Organic Performance Infill Is Corn - One Supplier Is Selected For This Section. Section 3: Artificial Turf Coating Where Organic Performance Infill Is Different Than In Section 1 And 2. Crushed Olive Stone Is Not Approved. - One Supplier Is Selected For This Section. For Section 3, The Provider Is Free To Offer An Infill That Meets The Minimum Requirements Such As For Example Cork And Is Not Wood Or Corn Crumbs. However, Infill Made From Olive Stone Will Not Be Accepted. The Products Offered Must Meet The Minimum Technical Requirements Set Out In The Invitation To Tender And Its Annexes.

Description: Contract notice – general guideline, standard rule, open procedure (construction work) Astrid Lindgren School, Weiterstadt -extension, new classrooms - interior doors (004, 005, 009) interior doors (004, 005, 009) The Darmstadt-Dieburg district (client = Ag) intends to build an inclusive, three-stream elementary school with all-day care in timber construction (new building = building 009) and to renovate the two existing buildings (buildings 005 and 004) on the site of the existing Astrid Lindgren elementary school (als) in Weiterstadt-Braunshardt. Interior doors are required for the interior work (steel frames, wooden frames, stainless steel frames and wooden block frames). Main quantities in the LV for wooden interior doors (buildings 009, 005 and 004): 009 New building: - Factory and assembly planning - Wet room doors = 6 pieces. - Wet room doors with sound insulation requirements = 1 piece. - Damp room doors = 15 pieces. - Doors with sound insulation requirements = 19 pieces. - Doors with fire and sound insulation requirements = 1 piece. - Doors without fire and sound insulation requirements = 1 piece. - Doors with fire protection requirements = 8 pieces. 005 Boxwood construction: - Factory and assembly planning ? - Doors without fire and sound insulation requirements = 3 pieces. ? - Doors with sound insulation requirements = 11 pieces. 004 Swedish construction: - Factory and assembly planning ? - Doors without fire and sound insulation requirements = 7 pieces. - Doors with sound insulation requirements = 10 pieces. - Doors with fire and/or sound insulation requirements = 3 pieces.

Details: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; And Request For Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2025-01 (12 November 2024). The Solicitation Number For This Request For Proposal (rfp) Is W91zlk-25-r-0007. this Combined Synopsis/solicitation Is Being Issued As Full And Open Competition Under The Associated North American Industry Classification System (naics) Code 334519 Other Measuring And Controlling Device Manufacturing. The Government Contemplates Award Of A Firm-fixed Price Type Contract In Accordance With Far Part 13, Simplified Acquisition Procedures. This Procurement Will Be Evaluated As Lowest Price Technically Acceptable, For The Procurement Of The Following Service. All Offerors Shall Provide A Price To Perform The Requirements Of The Attached Performance Work Statement (pws) Using The Schedule Of Services Attached. calibration And Repair Services For Government Owned Radiac Instruments - W91zlk-25-r-0007. Price Proposals Shall Include Firm Fixed Pricing For One (1) Base Year And Two (2) Option Years Of 12 Months. The Expected Period Of Performance Will Be 15 February 2025 To 14 February 2028 For A Total Of 42 Months. instructions And Information To Offerors: 52.212-1 Instruction To Offerors-- Commercial Items/services this Clause Applies In Its Entirety And There Are Currently No Addenda To The Provision. proposals Shall Be Submitted In Two (2) Separate Volumes: volume I: Technical Proposal: Radiac Instruments – W91zlk-25-r-0007 volume Ii: Pricing Proposal Price Proposals Shall Include Firm Fixed Pricing For One (1) Base Year And Two (2) Option Years With A Duration Of Twelve (12) Months. all Proposals Shall Be Submitted Via Email With The Subject Line: w91zlk-25-r-0007 Proposal From (insert Company Name) the Provision At Far 52.212-2 - Evaluation -- Commercial Items, Applies To This Acquisition. far 52.212-2 - Evaluation -- Commercial Items, Applies To This Acquisition. acceptability Of Proposals Will Be Based On Meeting All The Requirements Of The Performance Work Statement (pws). Failure To Address Each Requirement Will Result In The Proposal Being Rated Unacceptable. The Contract Will Be Awarded To The Lowest Price Technically Acceptable (lpta) Offeror. The Technical Evaluation Will Be A Determination Based On Information Furnished By The Vendor In The Submitted Proposals. The Government Is Not Responsible For Locating Or Securing Any Information Which Is Not Identified In The Offer. The Government Reserves The Right To Make An Award Without Discussions. 52.212-3 Offeror Representations And Certifications -- Commercial Items. all Quotations From Responsible Sources Will Be Fully Considered. Vendors, Who Are Not Registered In The System For Award Management (sam), Prior To Award, Will Not Be Considered. partial Proposals Will Not Be Evaluated By The Government. The Government May Reject Any Proposal That Is Evaluated To Be Unrealistic In Terms Of Program Requirements, Contract Terms Or Conditions, Or An Unrealistic High Or Low Price When Compared To Government Estimates, Such That The Proposal Is Deemed To Reflect An Inherent Lack Of Competence Or Failure To Comprehend The Complexity And Risks Of The Program. all Proposals Shall Be Submitted Via Email With The Subject Line: w91zlk-25-r-0007 Proposal From (insert Company Name). proposal Format: volume I: Detailed Technical Proposal To Include The Following Elements: 1. Capability To Perform The Required Services As Indicated In The Pws 2. Quality Assurance Plans 3. Proposed Format And Schedule For Deliverables a. Detailed Information Showing That The Contractor Is Able To Meet The Performance Requirements Of The Performance Work Statement; b. Point Of Contact Name And Contact Information, Company Cage Code, Uei Number, And Tin. Partial Quotes Will Not Be Evaluated By The Government. volume Ii: Detailed Price Proposal 1. Proposed Firm Fixed Price For A Base Year And Three Option Years, On Attached Schedule Of Services. 2. This Requirement Shall Be Awarded On The Basis Of Lowest Priced Technically Acceptable. the Price Volume Shall Clearly Identify The Proposed Firm-fixed Price Unit Prices With All Estimated Totals For Clins. all Evaluated Quotes Shall Be Rated Technically Acceptable Or Unacceptable. To Be Considered For An Award, A Rating Of Acceptable Must Be Achieved In Each Factor And Sub Factor. Offerors Shall Clearly Articulate The Technical Approach (including Risks And Contingencies) For Performing The Work, An Understanding Of The Requirement, And The Capacity To Perform The Following Services. far 52.212-2 - Evaluation -- Commercial Items, Applies To This Acquisition. acceptability Of Proposals Will Be Based On Meeting All The Requirements Of The Performance Work Statement (pws). Failure To Address Each Requirement Will Result In The Proposal Being Rated Unacceptable. The Contract Will Be Awarded To The Lowest Priced Technically Acceptable (lpta) Offeror. The Government Is Not Responsible For Locating Or Securing Any Information Which Is Not Identified In The Offer. The Government Reserves The Right To Make An Award Without Discussions. 52.212-3 Offeror Representations And Certifications -- Commercial Items. all Quotations From Responsible Sources Will Be Fully Considered. Offerors, Who Are Not Registered In The System For Award Management (sam), Prior To Award, Will Not Be Considered. Offerors May Register With Sam By Going To Www.sam.gov the Offeror Shall Include A Point Of Contact Name And Contact Information, Company Cage Code, Uei Number, And Tin. partial Quotes Will Not Be Evaluated By The Government. offerors Shall Include A Completed Copy Of The Provision At Far 52.212-3, Offeror Representations And Certifications- Commercial Items, With Its Offer. submission Procedures: all Questions Regarding This Solicitation Must Be Submitted To The Contracting Officer Nikeena Brown And The Contract Specialist Julius Wood Via Email No Later Than 12:00 P.m. Eastern Time, 21 January 2025, To Julius.a.wood.civ@army.mil Or Nikeena.s.brown.civ@army.mil. responses To This Solicitation Must Be Signed, Dated, And Received No Later Than 15:00 Or 3:00 P.m. Eastern Time, 6 February 2025. Responses Must Be Sent By Email Directly To The Contracting Officer Nikeena Brown And The Contract Specialist Julius Wood Julius.a.wood.civ@army.mil Or Nikeena.s.brown.civ@army.mil. primary Point Of Contact: julius Wood contract Specialist julius.a.wood.civ@army.mil no Telephone Inquires Will Be Honored

Description: CATEGORY: PAINT R F U MARKING BLACK , PAINT RFU AD SPR SYN ENA SKY BLUE , PAINT RFU FIN SYN ENA BR SPR OLIVE GREEN , PAINT RFU OLIVE GREEN , PAPER WRAPPING WATER PROOF PLAIN 841 MM , POLISH LEATHER BLACK , POLISH METAL POTASSIUM , POLISH WAX , POLYTHENE FILM 25 MM THICK X 1 M WIDTH , RIVETS COUNTERSUNK FLAT HEAD 90 DEGREE S , PINS COTTER SPLIT STEEL 1 Point 6 MM X 25 MM , PINS COTTER SPLIT STEEL 2 Point 0 MM X 25 MM , PINS COTTER SPLIT STEEL 2 Point 5 MM X 25 MM , PINS COTTER SPLIT STEEL 4 Point 0 MM X 40 MM , PINS COTTER SPLIT STEEL 5 Point 0 MM X 80 MM , PINS COTTER SPLIT STEEL 8 Point 0 MM X 80 MM , SCREW WOOD SLOTTED CSK HEAD MILD STEEL N , SOAP LAUNDRY , SOAP TOILET , SOAP SOFT , SPIRIT DENATURED , SUPER BRIGHT EL , TURPENTINE , WIRE STEEL MILD ANNEALED 5 Point 00MM , WIRE STEEL SPRING SOFT 0 Point 500MM , WIRE STL MILD DRAWN GLVD 2 Point 00MM , NAILS STEEL WIRE ROUND 100 MM X 5 Point 0 MM , NEEDLE TAILOR DARNING 65 MM X 1 Point 4 MM , THINNER ANTICHILL , PAPER WRAPPING 1189 MM X 100 MTRS , OIL LINSEED RAW , PAINT R F U MARKING SIGNAL RED , PAINT R F U MARKING WHITE , PAINT FRU GS SYN DARK BROWN , NAILS STEEL WIRE ROUND 50 MM X 3 Point 15 MM , NAILS STEEL WIRE ROUND 70 MM X 2Point 5 MM , NAILS STEEL WIRE ROUND 70 MM X 3 Point 15 MM , NAPTHALENE BALLS , NEEDLE DARNING TAILOR 47 MM

Description: 122005tool24j, 98090616, Quantity: 3450 Kgs. Scrap Condemned Unserviceable Tools Consisting Of Cutting Pliers,toe Load Measuring Device, Heavy Duty Stapler, Gauge Cum Level, Beach Umberlla, Plate Screw, Screw Drivers, Cc Insert, Twist Drill, Drill Bits, De Spanners, Spirit Level, Hacksaw Blades, Nose Pliers, Garden Scissors, Oxygen Regulators, Probe, Sewing Machine, Typewriters, Taco Meters, Screw Gauges, Inside And Outside Calipers, Hammers, Chisels, Augers, Anvil, P.m. Yoke, Wheel Distance Measuring Gauges, Cutting Jaws Spreader, Rail Thermometers, Punches, Milling Cutters, Saws, Welding Holders, Welding Shields, Pipe Wrenches, Grease Guns, Compass, Torque Wrench Feeler Gauges, Files, Box Spanners, Level Spirit, Piston Holding, Bp Gauge, Fp Gauge,tail Gauge, Electronic Drum Clock, Theodolite, Hydraulic Crimping Tool, Hydraulic Pressure Test Pump, Tap Set Different Sizes, Diameter Gauge, Bench Vice, Oil Cans Different Sizes, Hammer Keying, Axes, Chisel Flats, Ratchets, Hacksaw Frames, Poldi Hardness Tester, Reversible Ratchets, Petro Max Lamp, Torch Lights, Steel Tape, Small Gas Cylinder Lamp, Weighing Holder, Electrode Holders, Earth Clamp, Nozzles, Circular Band Saws, Wood Cutting Pads, Tool Inserts, Allen Keys, Standard Weights, Leveling Instruments, Drawing Tools, Booster Chisel, Hand Hammer Riveting, Blowers, Bench Vice, Grease Gun, Rail Thermo Meter, Spark Plug, Power Coil, Bridge Rammer, Bearing Puller, Tirfors, Paragon Automatic Level With Pvc Box And Other Similar Items Of Tool Scrap Of Sorts And Sizes, Full Or Broken, With Or Without Attachments. Special Note- Negligible Non-ferrous Attachments. Note: Delivery By Weighment Basis Only Location: Bin No-2005, In Godown No- 2. Hsn Code: 72044900 Gst: 18 Percent. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988.

Description: Lot No.sse/w/bs/01 To Sse/w/bs/24 "total Qty: 26 Railway Qrts.scrap And Unservicable Masonary Structure Of Abandoned, Ballyshop Railway Colony Nagpur, (19) Qtrs, Qtr No.(gl/54/7+8), (gl/55/1+2), (gl/60/4), (gl/60/8), (gl/61/1+2), (gl/64/5+6), (gl/65/1+2), (gl/70/7+8), (gl/74/1+2), (gl/74/7+8), (gl/80/3+4), (gl/80/5+6), (gl/84/1+2), (gl/85/7+8), (gl/96/1+2), (c/l/102/1+2), (m/104/1+2), (m/106/4), (l/110/2) Motibagh Railway Colony Nagpur, (05) Qtrs, Qtr No.(s/90/1-2), (gl/21/1-2), (gl/22/1), Punjabi Line Railway Colony Nagpur, (02) Qtrs, Qtr No.(gl/27/3+4), 226/1 Abandoned Structure Components Includes. 1) Ms Scrap Weight :- 12.184 Mt Approx 2) Wood : 16.981 Mt Approx,3)pvc: 0.024 Mt Approx 4) Ac Sheet :- 1256.75 Sqm Approx 5)brick Work:-464.01 Cum Approx, & 6)concrit :-6.89 Cum Approx, The Lot To Be Sold & Delivered In "as Is Where Is Basis".remarks: The Masonry Structures (building/quarter) Should Be Dismantling/demolished Completely And Removal Of The Released Materials By The Purchaser On His Own Arrangement And Take All Debris And Materials Etc Which Has Come Out From Dismantling. Purchaser Will Demolish And Clear Upto Ground Level Only. Explosive Should Not Be Used For Dismantling. Any Loss/damage That May Arise (if Any) From Due To Theft, Accident, Flood Etc Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances. Remarks: Due To Complexity Of Lots, Free Delivery Period Against This Lot Will Be 80 Days.

Description: Allocation No.21213304.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Memu Tr. Coach Body Bearing Nos.[1]er/22088/asn, Type.-c. [2] Er/22089/asn, Type.-c. [3] Er/410018/asn, Type.-c. Total Qty-03 Nos. To Be Sold Along With 02 Nos. Of Condemned Bogie [per Coach] But Without Excluded Fittings. Excluded Fittings Are 04 Nos. Of Wheel Sets (per Coach) With Its Fittings & Non-ferrous Attachment If Any Are Excluded From Sale And Will Be Returned To The Custodians As Per Extent Procedure. Approx Saleable Weights Of Condemned Memu Tr. Coaches Are Included With The Un-serviceable Items, Ferrous-iron, N- Ferrous/ Other¿s Items .i.e. Un-serviceable Aluminium Window Guide Frame- (22nos In 140.4 Kg Approx For Coach Sl-1, 15nos. In 93.6 Kg. Approx For Sl-2 & 21nos. In 131.04 Kg. Approx For Sl-3). Aluminium-(approx. 0.1kg. For Each Coaches), Bronze-(approx. 0.6kg. For Each Coaches), Copper Cable-(approx. 62.59kg. For Each Coaches), Rubber-(approx. 259.376 Kg. For Each Coaches), S.s.trough Floor-(approx. 960 Kg. For Each Coaches), Fibre & Glass-(approx. 470.24 Kg. For Coach Sl-1, 520.72kg For Sl-2 & 480.4kg For Sl-3), Wood-(approx. 1551.3kg For Each Coaches) & Rexin And Foam-(approx706.56 Kg For Each Coaches) Etc. Which Are Unserviceable And Non-returnable. Location- Lying At Carriage Complex/kpa. After Sale, Coaches Will Be Handed Over To Purchaser For Dismantling And Cutting At C And W Extension Yard/kpa. Cutting And Dismantling Of Coaches Is To Be Made At C And W Extension Yard/kpa By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Coaches Are To Be Returned To The Custodian Before Delivery.

Details: Customized Packaging Of The Following: 5 Packs Of Stirrer (wooden, 1000s/pack) 5,000 Sachets Of Coffee (2 Grams, With 1 Color Print) 7,000 Sachets Of Creamer (5 Grams, With 1 Color Print) 7,000 Sachets Of Sugar (7 Grams, With 1 Color Print)

Details: Solihull Council Currently Commissions Information And Advice Support, Which Is Delivered From The Core In Solihull, The Bluebell Centre In Chelmsley Wood, By Phone And Online. These Are Called Our Community Advice Hubs. The Community Advice Hub Provides Universal Services With The Focus On Maintaining Independence, Good Health And Promoting Wellbeing. This Will Include, But Not Be Limited To: • Self-help Tools • Signposting On A Wide Range Of Issues Including: O Public Health Services, O Health And Wellbeing Information & Advice, O Leisure Services, O Employment And Education, O Relationships, O Legal, O Consumer, O Travel, O Immigration And Discrimination, O General Debt Advice, O Disability Benefits And Financial Advice, O Fast Track Triage People Through To Level 2 Specialist Services. The Council Wants To Engage With The Market To Help Inform The Shape Of Future Procurements To Secure The Right Capacity To Meet Local Needs In The Future. We Propose A Market Testing Exercise To Help With This.