Valve Tenders

Details: i) Geo-Technical & Hydro- geological Sub Surface Investigation, Surveying, Planning, Designing, Construction & commissioning of atleast. 5.0 meter dia. & required depth Radial Collector well with 250 mm dia & 300 mtr.(approx) long Infiltration Gallery with laying of LCG strainer pipe of minimum 8 mm thick including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with 01(one) LT Station room for termination of WBSEDCL power source at vicinity of High Bank at Subarnarekha River (Kerwari), protection work at river bank, including construction of Pipe carrying Bridge with necessary Civil, Electrical (according to I.E. rules), Mechanical & all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement and (ii)Laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves for raw water rising main work, temporary road restoration works for vehicular movement and pillar carrying pipe line and Jack Pushing works for raw and clear water rising main work all complete and (iii)Construction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per approved departmental design, drawing & Specification etc at zone – A & Zone – B including land development , approach road, internal drainage, boundary wall and Sal Bullah Piling etc and pipe line work and connection to the Distribution and inlet line all complete (iv) Surveying , Geo-Technical Investigation, Planning, Designing, Construction & Commissioning of 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir with minimum 400 cum capacity sedimentation tank and Slow sand filter of area 1000 Sqm minimum, Chlorination treatment unit, ,land development ,approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement within Jhalda Municipality under AMRUT 2.0 Project.

Details: i) Geo-Technical & Hydro- geological Sub Surface Investigation, Surveying, Planning, Designing, Construction & commissioning of atleast. 6.0 meter dia. & required depth Radial Collector well with 250 mm dia & 300 mtr.(approx) long Infiltration Gallery with laying of LCG strainer pipe of minimum 8 mm thick including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with 01(one) LT Station room for termination of WBSEDCL power source at vicinity of High Bank at Subarnarekha River (Kerwari), protection work at river bank, including construction of Pipe carrying Bridge with necessary Civil, Electrical (according to I.E. rules), Mechanical & all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement and (ii)Laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves for raw water rising main work, temporary road restoration works for vehicular movement and pillar carrying pipe line and Jack Pushing works for raw and clear water rising main work all complete and (iii)Construction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per approved departmental design, drawing & Specification etc at zone – A & Zone – B including land development , approach road, internal drainage, boundary wall and Sal Bullah Piling etc and pipe line work and connection to the Distribution and inlet line all complete (iv) Surveying , Geo-Technical Investigation, Planning, Designing, Construction & Commissioning of 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir, sedimentation tank and Slow sand filter , Chlorination system ,land development ,approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement within Jhalda Municipality under AMRUT 2.0 Project.

Details: Description Project Reference Number : Rfq Number: 014-02-2025 Location Of The Project : Bureau Of Fire Protection - Mimaropa Region : District 1a, Brgy. Sta Rita, Pinamalayan, Oriental Mindoro Standard Form Number : Sf-good-60 Revised On : 24-may-18 Request For Quotation Maintenance Of Generator Set Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions Below And Submit The Rfq In A Sealed Envelope Duly Signed By You Or Your Authorized Representative With Labels Addressed To Rbac Mimaropa, The Company Name And The Name Of The Project At The Bfp Mimaropa Regional Office, District 1a, Brgy. Sta. Rita, Pinamalayan, Oriental Mindoro Or Via Email Containing Only One (1) Pdf File Encrypted With Password Thru Bacbfpmimaropa@gmail.com. Notes For Online Submission: A. The Subject Must Be The Title Of The Procurement Project; B. There Should Be A Message Containing The Company/business Name, Name And An Active Contact Number Of The Bidder Or Its Authorized Representative To Be Contacted During The Bid Opening To Give The Password Of The Encrypted Pdf File; C. There Should Be Only 1 Pdf File Attached Containing This Form And Other Documentary Requirements Needed For The Project; And D. Unavailability Of The Contact Person During The Opening Of Bids Will Nullify And Disqualify Your Submitted Quotations. General Conditions: 1. Deadline Of Submission: Not Later Than 10 1300h February 2025 2. Instructions: Physical And Online Submission Of Rfq Are Accepted. Late Submission Is Not Allowed. 3. Warranty Shall Be For A Minimum Of Three (3) Months For Expendable Supplies, Or A Minimum Of One (1) Year For Non-expendable Supplies From Date Of Final Acceptance By The Procuring Entity; 4. Price Validity Shall Be For A Period Of One Hundred Twenty (120) Calendar Days; And 5. The Following Documents Shall Be Attached To The Duly Accomplished Quotation Form, To Wit: Eligibility Requirements A. Mayor's/business Permit B. Philgeps Registration Number C. Omnibus Sworn Statement D. Bir Registration Item No. Description Qty Abc Unit Price Abc Total Price Unit Price Total Price Maintenance Of Generator Set Generator Unit: 75 Kva Cummins 1 Change Oil And Filters 2 Lot 1,000.00 2,000.00 2 Change Of Fuel Filters 2 Lot 1,000.00 2,000.00 3 Adjustment Of Valve Clearance 2 Lot 2,700.00 5,400.00 4 Clean/change Of Air Cleaner 2 Lot 1,000.00 2,000.00 5 Cleaning Of Intake System 2 Lot 2,800.00 5,600.00 6 Change Of Air Cooler 2 Lot 2,700.00 5,400.00 7 Checking/addition Of Coolant 2 Lot 900.00 1,800.00 8 Check/lubricate Bearing 2 Lot 1,000.00 2,000.00 9 Adjustment Of Belt Tension 2 Lot 1,000.00 2,000.00 10 16.5 Liter Engine Oil 2 Container 5,500.00 11,000.00 11 Oil Filter 5052 2 Piece 3,300.00 6,600.00 12 Oil Filter Ff 1280 2 Piece 3,100.00 6,200.00 13 Oil Filter Lf 3345 2 Piece 3,500.00 7,000.00 14 Air Filter 2 Piece 1,300.00 2,600.00 15 4 Liters Coolant 2 Bottle 1,500.00 3,000.00 16 Service Charge 2 Lot 2,700.00 5,400.00 Mode Of Procurement: Small Value Procurement Date Of Delivery/completion/service: June And December 2025 Grand Total 70,000.00 (total Amount In Words) The Above Quoted Prices Are Inclusive Of All Cost And Applicable Taxes. Delivery Period Warranty Price Validity After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Signature Full Name Of Authorized Representative Company Name/business Name Tel. No. / Cellphone No./ Email Address Date

Details: Description Invitation To Bid 1. The Municipal Government Of Coron, Palawan, Through The Municipal Annual Budget Cy-2024 Intends To Apply The Sum Of Two Million Five Hundred Fifty Thousand Pesos (php2,550,000.00) Only Being The Abc To Payments Under The Contract For Supply And Delivery Of One (1) Unit Brand New 4x4 Pick-up Truck. (re-bid) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Unit Item Description Quantity 1 Unit Brand New 4x4 Pick-up Truck With At Least, 2.8l Diesel, 4 Cylinder Engine Type, 2024 Model Manual Transmission, 16 Valve Dohc Variable Nozzle Turbo With Air-cooled Intercooler, 2,755cc Engine Displacement, 204/3000-3400 Max Output, 420/140- 3400 Nm/rpm, 6-speed Manual Transmission With Lmt, 5325x2020x1845 Length X Width X Height, Front: Light Tinted, Back And Side Window: Tinted, Chair: Leather, Rubber Mat Floor, Color: Black, 3 Years/1000,000kms Warranty, With Lto Registration 1 2. The Municipal Government Of Coron, Palawan Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Forty-five (45) Calendar Days From The Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipal Government Of Coron And Inspect The Bidding Documents At The Address Given Below During Monday To Friday 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 29, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. The Municipal Government Of Coron, Palawan Will Hold A Pre-bid Conference On February 05, 2025, 10:00 Am At 3rd Floor Municipal Annex Building, Poblacion, Coron, Palawan, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The 3rd Floor Municipal Building, Poblacion, Coron, Palawan, On Or Before February 19, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 19, 2025 At 10:00 Am At The 3rd Floor Municipal Annex Building, Poblacion, Coron, Palawan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of Coron, Palawan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dr. Alan R. Guintapan Municipal Health Officer Municipal Health Office, Coron, 5316 Palawan Mobile Nos. 63-906-0644344 048-553-1799 Email: Lgucoron.bac@gmail.com

Details: Sources Sought for bash Scare Wars System – Quarterly Service/maintenance Technician (guam) this Is A Market Research/sources Sought Notice Seeking Information Only. This Is A Sources Sought Announcement Only Seeking Responses In Order To Determine Participation In This Acquisition. This Is Not A Solicitation/request For Proposal. This Should Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach Or Otherwise Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice. the Contractor Will Provide Quarterly Maintenance On Bird Aircraft Strike Hazard (bash) System Equipment As Specified In Salient Characteristics, To Include Direct Delivery To Andersen Air Force Base, Guam. salient Characteristics: 1. Overview: a. Maintenance Technician Trained And Certified On The Reed-joseph Scare Wars System Will Be Required To Ensure That All Equipment Is In Proper Working Order. Maintenance Technician Will Perform Quarterly Maintenance Inspections On The Complete Scare Wars Systems At Andersen Air Force Base To Include Performance Of Remote Radios, Testing Solar Panels For Proper Output, Verifying Charging Regulator, Battery Inspection, Checking Fuses And Wiring, Checking Hoses And Solenoids For Leaks And Corrosion, Lubricating All Bearings, And Will Ensure That All Lp Gas Cylinders Are Filled To Capacity For 1 Year. 2. Service/maintenance: a. Remote Bird Deterrent Units: check Remote Radios For Frequency Drift And Overall Performance load Test Solar Panels For Proper Output verify Charging Regulator Operation battery Inspection: check Hoses And Solenoid Valve For Leaks Or Corrosion check Fuses And Wiring scare Away Lp Gas Cannons: check All Components check Sparking Assembly check Rotomat Rotating Platforms For Loose Or Worn Parts Lubricate Cannons And Rotomats check Lp Gas Cylinders And Refill As Required distress Cry Generators: check All Components For Proper Operation check Fuses And Wiring the Anticipated Naics Code Is 811310, Commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance. this Sources Sought Is Issued Solely For Information And Planning Purposes Only And Is Not A Request For Proposals Or Quotes (rfp Or Rfq) Or An Obligation On The Part Of The Government To Acquire Any Services. Responses To This Sources Sought Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. The Government Reserves The Right To Determine How It Should Proceed As A Result Of This Notice. Furthermore, Those Who Respond To This Sources Sought Should Not Anticipate Feedback With Regard To Its Submission. The Government Will Not Pay Any Cost Incurred In Response To This Sources Sought. All Costs Associated With Responding To This Sources Sought Will Be Solely At The Responding Party's Expense. The Information Provided In This Sources Sought Is Subject To Change And Is Not Binding On The Government. Please Carefully Review The Attachments And Respond According To The Directions Stated Below. Documentation Of Technical Expertise And Capability Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Of Expertise, Certification, Authorization And Experience To Compete For This Acquisition. It Is Imperative That Business Concerns Responding To This Notice Articulate Their Capabilities Clearly And Adequately. Responses To This Notice Are Strictly Voluntary. please Include The Following In Your Response: name Of Company primary Poc (point Of Contact) institution Or Organization Affiliation email Address phone Number company's Business Size And Cage/uei Codes any Existing Or Pertinent Certifications, Trainings, Etc. do Not Include The Following In The Response: do Not Submit Formal Proposals Or Offers; do Not Submit Requests To Be Considered For Award Or To Be Notified Of A Future Solicitation; do Not Submit Requests To Be Added To A Mailing Or Distribution List; do Not Submit Questions Or Comments Not Related To This Sources Sought; do Not Respond Via Telephone. how To Submit Responses: submit The Required Information To Ms. Crystal Pryde, Contract Specialist, And Ms. Elena Gifford, Contracting Officer, At Elena.gifford.1@us.af.mil. please Include "sources Sought: Bash Scare Wars System – Quarterly Service/maintenance Technician" In The E-mail Subject Line. if You Have Any Questions Regarding This Sources Sought, Please Submit Them Via E-mail. the Sources Sought Closing Date Is 22 December 2025, At 1100 Am Chst. contracting Office Address: unit 14040 andersen Afb, Guam 96543 fob Destination: andersen Afb yigo, Guam 96929

Details: Description Republic Of The Philippines Santa Rosa (ne) Water District Santa Rosa – Fort Magsaysay Road, Brgy. Rizal, Santa Rosa, Nueva Ecija Invitation To Bid For Supply And Delivery Of 840 Pieces ½ Inch Volumetric Cold Water Meter With Two Pieces Tailpiece And Calibration Certificate 1. The Santa Rosa (ne) Water District (srwd), Through The Corporate Budget Approved By The Board Of Directors Intends To Apply The Sum Of Two Million Two Hundred Twenty-six Thousand Pesos (php 2,226,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of 840 Pieces ½ Inch Volumetric Water Meter, With Two Pieces Tailpiece And Calibration Certificate. Specification: - 15mm Volumetric Cold Water Meters - With Iso 4064-1 2024 - Meter Body Manufactures With Copper Alloy No Less Than 57% Copper - Meter's Measuring Chamber Equipped With Strainer - Meter Supplied With Non-return Valve, With Maximum Working Temperature @ 50 Deg. C. - With Two Tailpieces - With Calibration Certificate Terms And Conditions: Staggered Delivery Upon Receipt Of Purchase Order (p.o). Upon Receipt Of Po, Delivery Must Be Within Seven (7) Calendar Days. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Srwd Now Invites Bids For The Supply And Delivery Of 840 Pieces Volumetric Cold Water Meter ½ Inch, With Two Tailpiece And Calibration Certificate. Delivery Of The Goods Is Required 7 Days After The Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From Srwd And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8 Am To 5 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From January 20 To 12:00 Noon Of February 10, 2025 From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos (p 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than 12:00 Noon Of February 10, 2025. 5. The Srwd Will Hold A Pre-bid Conference On January 29 At 2 O’clock In The Afternoon At The Address Indicated Below. Bidders Are Required To Attend Pre-bid Conference And Conduct Product Presentation And Submit Sample/ Samples Of Product. Failure To Conduct Presentation Is A Ground For Disqualification. 6. Bids Must Be Delivered To The Address Below On Or Before 12:00 Noon Of February 10, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On February 10, 2025, At 2 O’ Clock In The Afternoon At Srwd Office Santa Rosa – Fort Magsaysay Road Brgy. Rizal, Santa Rosa Nueva Ecija. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 7. The Srwd Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Ms. Armie B. Tuazon Santa Rosa (ne) Water District Santa Rosa – Fort Magsaysay Road, Brgy. Rizal Santa Rosa Nueva Ecija 0908-814-5758 E-mail : Bac@santarosawater.gov.ph

Details: Description 1. The Municipality Of Consolacion, Through The Municipal Assistance Fund Intends To Apply The Sum Of Two Hundred Fifty Thousand Pesos (p 250,000.00) Being The Abc To Payments Under The Contract For Purchase Of Motorcycle Vehicle With Side Car To Be Used By The Barangay Tanods Of Barangay Tilha-ong, Consolacion, Cebu During Roving (second Posting). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Consolacion Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 10cd. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Office Of The Municipality Of Consolacion And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 31, 2025 To February 24, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (p 500.00). 1 May Be Deleted In Case The Abc Is Less Than One Million Pesos (php1,000,000) Where The Procuring Entity May Not Hold A Pre-bid Conference. 6. The Municipality Of Consolacion Will Hold A Pre-bid Conference On February 10, 2025 At 10:00 O’clock In The Morning At The Bac Office Located At The 4th Floor, Municipal Building, Poblacion Oriental, Consolacion, Cebu, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00 O’clock In The Morning, February 24, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 24, 2025 At 10:00 O’clock In The Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Consolacion Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Sharon Rose Gigremosa Jakhelene C. Tubin Bac Office 4th Floor, Municipal Building Poblacion Oriental, Consolacion, Cebu 268-3736/232-0392 Consolacionbac@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: A. Lguconsolacion.gov.ph Or B. Philgeps Website Atty. Paolo Crispino C. Sucalit Bac Chairperson Total Length 2090, Width 830mm, Height 1115mm, Seat Height 840mm, Distance Between Axis 1340mm, Minimum Distance Floor 260mm Weight (oil And Gas) 109kg Weight (w/ Oil And Full Fuel Tank 118kg) Type Of Motor Sohc 4-stroke, Air-cooled Arrangement Of Cylinders Acyl 124cc Bore And Stroke 54.0x54.0mm 1 Units Motorcycle Vehicle W/ Side Car 125cc Air Cooled, 4stroke, Sohc,2 Valve Engine, 8hp And 10mm Of Torque Manual Transmission Kick And Electric 2 Units

Details: The Department Of National Defence Has A Requirement For The Items Detailed Below. The Delivery Is Requested At Cfb Esquimalt And Cfb Halifax. Item 1, Gsin: 6110, Nsn: 99-7296313, Contactor, Magnetic Part No.: B32601, Ncage: K0738 Part No.: 2f210-1 + 2/2 Rh, Ncage: K0738 Part No.: A32365 Item 27 , Ncage: K0738 Quantity: 7, Unit Of Issue: Ea , To Be Delivered To Cfb Esquimalt. Item 2, Gsin: 6110, Nsn: 99-7296313, Contactor, Magnetic Part No.: B32601, Ncage: K0738 Part No.: 2f210-1 + 2/2 Rh, Ncage: K0738 Part No.: A32365 Item 27 , Ncage: K0738 Quantity: 7, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item3, Gsin: 5945, Nsn: 99-7225296, Relay, Electromagnetic Part No.: Tlfx, Ncage: U1528 Quantity: 6, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 4, Gsin: 5945, Nsn: 99-7225296, Relay, Electromagnetic Part No.: Tlfx, Ncage: U1528 Quantity: 6, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 5, Gsin: 4720, Nsn: 99-7301452, Tubing, Nonmetallic Part No.: 670-08-152, Ncage: K6451 Quantity: 4, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 6, : Gsin: 4720, Nsn: 99-7301452, Tubing, Nonmetallic Part No.: 670-08-152, Ncage: K6451 Quantity: 4, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 7, Gsin: 9150, Nsn: 99-2205612, Damping Fluid Part No.: 9956-1, Ncage: K1409 Part No.: Dtd5581, Ncage: K0379 Quantity: 4, Unit Of Issue: Bot, To Be Delivered To Cfb Esquimalt. Item 8, Gsin: 9150, Nsn: 99-2205612, Damping Fluid Part No.: 9956-1, Ncage: K1409 Part No.: Dtd5581, Ncage: K0379 Quantity: 4, Unit Of Issue: Bot, To Be Delivered To Cfb Halifax. Item 9, Gsin: 5330, Nsn: 99-7602120, Gasket Set Part No.: Jt22254-104, Ncage: U8616 Part No.: Cj-128625, Ncage: U2164 Quantity: 8, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 10, Gsin: 5330, Nsn: 99-7602120, Gasket Set Part No.: Jt22254-104, Ncage: U8616 Part No.: Cj-128625, Ncage: U2164 Quantity: 12, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 11, Gsin: 5920, Nsn: 99-0590120, Fuse, Cartridge Part No.: 059-0120, Ncage: K0647 Part No.: 27380-077, Ncage: K1159 Part No.: 42131-070-00-7, Ncage: Kc1m9 Quantity: 150, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 12, Gsin: 5920, Nsn: 99-0590120, Fuse, Cartridge Part No.: 059-0120, Ncage: K0647 Part No.: 27380-077, Ncage: K1159 Part No.: 42131-070-00-7, Ncage: Kc1m9 Quantity: 50, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 13, Gsin: 5920, Nsn: 99-0119925, Fuse, Cartridge Part No.: L693-10, Ncage: K0059 Part No.: 043-11113/06-fs3, Ncage: K7596 Part No.: 17-00006-005, Ncage: K0268 Quantity: 150, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 14, Gsin: 5920, Nsn: 99-0119925, Fuse, Cartridge Part No.: L693-10, Ncage: K0059 Part No.: 043-11113/06-fs3, Ncage: K7596 Part No.: 17-00006-005, Ncage: K0268 Quantity: 150, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 15, Gsin: 5920, Nsn: 99-0590115, Fuse, Cartridge Part No.: B22969, Ncage: K0967 Quantity: 50, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 16, Gsin: 5920, Nsn: 99-0590115, Fuse, Cartridge Part No.: B22969, Ncage: K0967 Quantity: 50, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 17, Gsin: 3110, Nsn: 99-9500077, Bearing, Ball, Annular Part No.: 6305cn, Ncage: K7182 Part No.: 105e7065b, Ncage: U1980 Part No.: 2100/13, Ncage: Kb256 Quantity: 16, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 18, Gsin: 3110, Nsn: 99-9500077, Bearing, Ball, Annular Part No.: 6305cn, Ncage: K7182 Part No.: 105e7065b, Ncage: U1980 Part No.: 2100/13, Ncage: Kb256 Quantity: 16, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 19, Gsin: 6110, Nsn: 99-7440571, Panel, Control, Electrical-electronic Equi Part No.: Ssks001959, Ncage: Kc6k3 Quantity: 2, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 20, Gsin: 6110, Nsn: 99-7440571, Panel, Control, Electrical-electronic Equi Part No.: Ssks001959, Ncage: Kc6k3 Quantity: 2, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 21, Gsin: 2040, Nsn: 99-2529309, Leading Edge, Acoust Part No.: 2040-99-252-9309, Ncage: Ka352 Quantity: 200, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 22, Gsin: 2040, Nsn: 99-2529309, Leading Edge, Acoust Part No.: 2040-99-252-9309, Ncage: Ka352 Quantity: 200, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 23, Gsin: 5305, Nsn: 99-1924428, Screw, Cap, Socket Head Part No.: Ssk/m/112/90/0001 Sheet 019 Issu, Ncage: K6451 Quantity: 300, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 24, Gsin: 5305, Nsn: 99-1924428, Screw, Cap, Socket Head Part No.: Ssk/m/112/90/0001 Sheet 019 Issu, Ncage: K6451 Quantity: 300, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 25, Gsin: 4820, Nsn: 99-2389119, Parts Kit, Valve Part No.: 808-a1-4-d-1-a-2 , Ncage: K9077 Part No.: 808-a1-4-d-1-a-2, Ncage: L6427 Quantity: 4, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 26, Gsin: 4820, Nsn: 99-2389119, Parts Kit, Valve Part No.: 808-a1-4-d-1-a-2 , Ncage: K9077 Part No.: 808-a1-4-d-1-a-2, Ncage: L6427 Quantity: 4, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Item 27, Gsin: 5310, Nsn: 99-8845932, Nut, Plain, Castellated, Hexagon Part No.: Qca/ssk/m/100/40/0002/202, Ncage: K2516 Quantity: 150, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 28, Gsin: 4720, Nsn: 99-5313472, Tubing, Nonmetallic Part No.: Rl504, Ncage: K7053 Part No.: Cmd151688, Ncage: K7053 Part No.: U4629101, Ncage: 38655 Quantity: 300, Unit Of Issue: Ea, To Be Delivered To Cfb Esquimalt. Item 29, Gsin: 4720, Nsn: 99-5313472, Tubing, Nonmetallic Part No.: Rl504, Ncage: K7053 Part No.: Cmd151688, Ncage: K7053 Part No.: U4629101, Ncage: 38655 Quantity: 300, Unit Of Issue: Ea, To Be Delivered To Cfb Halifax. Bidders Proposing An Equivalent Or A Substitute Product Must Indicate The Brand Name And Model And/or Part Number And The Ncage They Are Offering. This Procurement Is Subject To The Controlled Goods Program. The Defence Production Act Defines Canadian Controlled Goods As Certain Goods Listed In Canada’s Export Control List, A Regulation Made Pursuant To The Export And Import Permits Act (eipa). The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada.

Details: Description Republic Of The Philippines Province Of Iloilo Municipality Of Calinog Lgucalinog@yahoo.com/mpdocalinog@gmail.com Invitation To Bid For The Purchase Of Two (2) Units Garbage Compactor Intended For Solid Waste Collections "1. " The Local Government Unit Of Calinog, Through The 20% Development Fund 2025 Intends To Apply The Sum Of Eight Million Pesos Only (php. 8,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Two (2) Units Garbage Compactor Intended For Solid Waste Collections. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Calinog Now Invites Bids For Purchase Of Two (2) Units Garbage Compactor Intended For Solid Waste Collections, With The Following Item/description:. Item No. Unit Item Description Qty 1 Unit Garbage Compactor 2 Specification: "engine: Features: 6-cylinder In-line, Rated Power(hp): 180-200hp" Fuel Type: Diesel Fuel Capacity (l): 250 - 300 Liters Max Engine Speed: 2,600-2, 650 Breaking System: Type: Air Break System, Service Brake: Dual-circuit Air Brake, Parking Brake: Spring Energy, Auxiliary Brake: Exhaus Valve Braking (evb) Gross Vehicle Weight (kg): 14,000- 14,500 Kg "3. " Delivery Of The Goods Is Required Sixty (60) Calendar Days Upon The Issuance Of Po/notice To Proceed. Bidders Should Have Completed, Within One Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 5. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 6. Interested Bidders May Obtain Further Information From Bac Secretariat Of Local Government Of Calinog, Temporary Municipal Hall Building (calinog Food Court), Poblacion Rizal Ilawod, Calinog, Iloilo And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm From Monday To Friday . 7. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 10, 2024 From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Ten Thousand Pesos (php. 10,000.00). 8. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 9. The Local Government Unit Of Calinog Will Hold A Pre-bid Conference On December 20, 2024 9:00 A.m. At Poblacion Rizal Ilawod, Calinog, Iloilo Which Shall Be Open To Prospective Bidders. 10 Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 9:00 A.m. Of January 03, 2025 . All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause. Bid Opening Shall Be On 9:00 A.m. Of January 03, 2025 At Calinog Temporary Municipal Hall Building (calinog Food Court), Poblacion Rizal Ilawod, Calinog, Iloilo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 11 The Local Government Unit Of Calinog Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12 For Further Information, Please Refer To: Engr. Jose Nolito Tomulto Head, Bac Secretariat Poblacion Rizal Ilawod, Calinog, Iloilo Lgucalinog@yahoo.com/mpdocalinog@gmail.com Issued This December 07, 2024. Jose Rex Casipe Bac Chairperson

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For The Procurement Of Utility Vehicle Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The Pgo – Capital Outlay 2025 (utility Vehicle) Intends To Apply The Sum Of Six Million Nine Hundred Thousand Pesos Only (php6,900,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Itb No. (gds) 2025-01-002 Procurement Of Utility Vehicle, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids For Procurement Of Utility Vehicle, Eastern Samar With The Following Items; No. Unit Item Description Qty. Total Cost 1 Unit Motovehicle Key Specification 2 6,900,000.00 Dimension And Weight Overall Dimensions (mm): 5,325x1,9000x1,845 Wheelbase (mm): 3,085 Seating Capacity: 5 Seater Engine Engine Type: 2.8l Diesel, 4-cylinder, 16 Valve Dohc Variable Nozzle Turbo With Air-cooled Intercooler. Engine Displacement (cc): 2,755 Maximum Torque (nm/ Rpm): 420nm/1,400-3,400 Rpm Fuel Capacity: (l)80 Transmission Power Transmission: 6-speed M/t W/ Imt Front Brake/rear Brake: Ventilated Dics/drum Type Tires: 265/60 R18 Wheels (size): 18” Alloy Delivery Of The Goods Is Required Within 60 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Ten Thousand Pesos Only (php10,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On January 10, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before, January 24, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bac Office, Capitol Building Borongan City, Eastern Samar Contact No. 63-55-5608312; 09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman