Valve Tenders

Details: Description Item No. Description Quantity Unit I. Pump & Electro-mechanical Equipment Estimated Qty. = 1.00 Lot A. Materials • Submersible Deep Well Pump Rated To Deliver 8 Lps @ 352.63 Ft. (107.5 M) Design Tdh. 4" Ø Riser Pipe Connection. Made Of Heavy-duty Stainless Steel; Corrosion Resistant; Complete With Cable Guard And Built-in Jam-free Check Valve, 1 Unit • Submersible Motor 15hp, 460v, 3-phase, 60hz. Stainless Steel; Double Flanged Nema Mounting Design; Stainless Splined Shaft; External Sand Slinger On Shaft; Copper Bar Rotor; Complete With Motor Lead Wire, 1 Unit • 4" Ø X 3m Upvc Column Pipe, Heavy Type, Square Thread With Rubber Seals, 32 Pcs • 4" Ø Top And Bottom Adaptor (male End Connection), Stainless, 1 Set • 4" Ø Upvc Column Pipe Coupler, 33 Pcs • Pump Guard With Connector, 1 Pc • Well Seal 14" X 14" X 1" With 100mm Ø Bore With Flange And Elbow (long Radius), 1 Pc • Submersible Cable, 3c-8.0mm², 150 Meters • Tw Wire #14 Stranded, 2 Boxes • Splicing Kit 82-a3, 1 Lot • Splicing Tapes (rubber Tapes, Electrical Tapes), 1 Lot • Pull Box, Electrically Insulated, Size: 12", 1 Unit • Variable Frequency Drive (vfd) Suited For 15hp, 460v, 3-phase, 60hz With Graphical Display Includes Supply And Delivery. The Whole Panel Is Assembled In Nema 12 Enclosure Complete With Mcb/mccb Rated Depending On Motor Size, By-pass Contactor, Thermal Overload Relay, Lightning Arrester, Liquid Level (well) Control Relay, Start/stop Push Button, Pilot Lights, Ammeter And Voltmeter Transfer Switches And Hoa Selector Switch, 1 Assembly • Pressure Transmitter 0 - 10 Bars, 4 - 20ma, With Shielded Wire, 1 Unit • Soft Starter Suitable For 15hp, 460v, 3-phase, 60hz. Complete With Mcb/mccb Rated Depending On Motor Size, Magnetic Contactor With Start/stop Push Buttons, Pilot Lights, Liquid Level Control Relay With Electrodes, Overload Relay, Under/over Voltage Relay, Lightning Arrester, With Phase Failure And Phase Imbalance Relay, Ammeter, Voltmeter, Ats, Vts And Hoa Selector Switch Mounted In Nema 12 Enclosure, 1 Assembly B. Installation, Testing, And Commissioning, 1 Lot Ii. Discharge Line Estimated Qty. = 1.00 Lot A. Materials • Discharge Pipe, Bi, 4" Ø X 20 Ft., Sch. 40, Seamless, 2 Pcs • Dynamic/ Combination Air Valve 1", 2 Pcs • Discharge Elbow 4" Ø X 90°, Flange-type (long Radius), 1 Pc • Sleeve-type Coupling With Harness 4" Ø (adapted To Bi Pipe), 2 Pcs • Pressure Switch, 1 Pc • Pressure Transmitter/switch/gauge Fitting Assembly, 1 Pc • Bi Tee, 4" Ø, Flange-type, Weldable, 1 Pc • Manometer Assembly, 1 Unit • Orifice Plate 75mm Ø X 180mm Ø,1 Pc • Hose Bib Assembly, 1 Unit • Fabricated B.i. Elbow, 4" Ø X 45°, Flange-type, Weldable, 2 Pcs • Flexible Conduit, Ltc, 2" Ø, 1 Length • Straight Connector, 2" Ø, 1 Set • Pvc Pipe With Coupling, 2" Ø, 1 Length • Pvc Pipe With Coupling, 3/4" Ø, 1 Length • Pvc Elbow, 2" Ø X 90°, 1 Lot • Pvc Elbow, 3/4" Ø X 90°, 1 Lot • Slip-on Flange 4" Ø With Gasket, 1 Lot • Bolt And Nuts, 1 Lot • Chlorinator, 10 Gpd @ 100 Psi, 1 Unit • 4"ø D.i Gate Valve, F/f, 1 Pc • 4"ø D.i Adaptor, F/m, 1 Pc • 12mm Reinforcement Steel Bar, 7 Pcs • 10mm Reinforcement Steel Bar, 9 Pcs • Cement 40 Kgs/bag, 10 Bags • 1/2" X 8" Anchor Bolt With Nut And Washer, 16 Pcs • 4-10"x10"x1/2" Base Plate, 1 Lot • 4" Ø Pipe Clamp With Bolt And Nut, 8 Pcs • Sand, 1 M3 • Gravel, 1.5 M3 B. Installation, Testing, And Commissioning, 1 Lot Iii. Electrical Equipment Estimated Qty. = 1.00 Lot, A. Materials, • 3 Phase, 60a, 460 Vac Molded Case Circuit Breaker, Panel Mounted, 1 Unit • Manual Transfer Switch With Two Mechanical Interlocked Circuit Breaker (60 At, 3ø, 460 V) With Two Pilot Lamps Indicator For Normal Cooperative Power And Emergency Generator Set Power, 1 Unit • Dry Type Transformer, Rated 5 Kva, 460 Vac Primary, 230 Vac Secondary, Single Phase, 60 Hz 2 - 2 1/2% Above And Below Normal Tappings, Class H Insulation, Pad Mounted And In Nema 1 Enclosure. The Unit Shall Be Provided With 50at/50af Circuit Breaker Protection At Primary Side, 1 Unit • 8mm² Thhn Cu. Wire Including The Wire To Be Used In The Interconnection Of The 3-10kva Transformer, 1 Lot B. Installation, Energization, Testing, And Commissioning, 1 Lot Iv. Generator Set Estimated Qty. = 1.00 Unit, A. Specification Prime Rating Power, Heavy Duty Generator, Diesel Engine Rated At 25 Kva, 480 Volts, 3 Phase 60hz, 1800 Rpm. Automatic Transfer Switch (ats) Compatible, Sound Proof And Water Protected Canopy, Trailer Mounted With Two Wheels With Towing Bar, 1 Unit Technical Data: Prp Continuous Power: 25 Kva / 20 Kw Power Factor: 0.8 Pf Voltage (vac): 460 V Frequency: 60 Hz Speed: 1800 Rpm Governor Type: Mechanical Battery: 12 V Combustion System: Direct Injection Fuel: Diesel No. Of Cylinder: 6 Induction System: Turbocharged, Air To Air Charge Cooled Cooling System: Water-cooled Insulation System: Class H Type Of Excitation: Shunt Type Of Regulation: Avr Voltage Regulation (steady): ± 5% B. Testing And Commissioning, 1 Lot V. Additional Requirements: A. Project Items And Technical Specifications Shall Comply In Accordance With All Annexes Of This Section Which Includes Annex “a”: Detailed Plans And Annex “b”: Operating Specifications And Other Requirements. B. Installation Works Shall Include The Provision Of All Necessary Equipment To Complete All Works. Note: 1. Fob Mnwd Naga City 2. Partial Delivery Shall Not Be Accepted 3. Delivery, Installation, Testing, And Commissioning Completion: Ninety (90) Calendar Days 4. Warranty: A. One (1) Year Against Structural Defects/failures B. Three (3) Years Against Factory Defects For Pump And Motor

Details: Description Procurement Of Various Agricultural Equipment And Machineries: (nineteen (19) Units Brush Cutter; Nineteen (19) Units Knapsack Sprayer; Five (5) Units Chainsaw) 1. The Department Of Agriculture-regional Field Office 7, Through National Expenditures Program (nep) For Calendar Year ( Fy) 2025 Intends To Apply The Sum Of Eight Hundred Eighty Thousand Pesos (₱880,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Agricultural Equipment And Machineries (nineteen (19) Units Brush Cutter; Nineteen (19) Units Knapsack Sprayer; Five (5) Units Chainsaw). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office 7, Now Invites Platinum Philgeps Registered Supplier/manufacturer/ Contractors/ Bidders To Bid For The Procurement Of Various Agricultural Equipment And Machineries (nineteen (19) Units Brush Cutter; Nineteen (19) Units Knapsack Sprayer; Five (5) Units Chainsaw) With The Minimum Specifications: Nineteen (19) Units Brush Cutter Minimum Specifications: Displacement (cc): Minimum Of 35; Engine: Single Cylinder, 4 Stroke Cycle, Gasoline; Ignition: Transistorized Magneto; Anti-vibration Device: On Handle; Gear Head: High Quality, Heavy Duty Gears Ensure Extraordinary Durability And Reliability; Clutch Housing: Free Rotation Of The Shaft And The Upright Position Of The Engine; Ergonomic Grip: Enabling Effortless Long Term Operation; Other Requirements: Non-symmetrical Bike Handle; Vibration Dampening Bracket; With Reflectorized Da Logo (2 Inches Diameter); With One (1) Year Warranty On Parts And Services (warranty Certificate); With Complete Standard Tools And Accessories; Nineteen (19) Units Knapsack Sprayer Minimum Specifications: A. Prime Mover: Type: Battery Operated; B. Performance/classifications: Sprayer Capacity (l): Minimum Of 16; Lance Length (mm): Minimum Of 500; Classification: Dual; Tank Material: Stainless Steel Or Plastic; C. Other Features/ Accessories/parts: With Spare Parts (nozzle - 2 Pcs.); With Original Equipment Manufacturer Manual (oem); With Set Of Standard Tools For Maintenance; Pressure Gauge With Accuracy Of ± 1% Of Maximum Pressure; Fluid Level Indicator; Cut-off Valve With Safety Lock; Minimum Of Two Filters (mesh 16/cm2); Emergency/quick Release Mechanism; At Least One Set Of Protective Nose And Mouth Mask And A Pair Of Eye Goggles; With Safety Markings And Labels; All Valve And Valve Seats Must Be Corrosion Resistant; With Reflectorized Da Logo (4 Inches Diameter); Subject For Actual Demonstration And Training Of Operators/ Site; Five (5) Units Chainsaw Minimum Specifications: Prime Mover : Gasoline Engine :2 Stroke/4 Stroke, Single Cylinder; Displacement: Minimum Of 30 Cm3; Power Output: Minimum Of 1.2kw; Chain Brake: Quick Stop; Bar Length: Minimum Of 12"; Other Requirements: With 3 Sets Spare Chain; With Safety Belt/harness; With Basic Tools And Accessories For Maintenance; With Reflectorized Da Logo (4 Inches Diameter); Subject For Actual Demonstration And Training Of Operators/site. Delivery Sites: 1.la Suerte Organic Vegetable Growers Association (lasovega) - La Suerte, Pilar Bohol – Brush Cutter (3 Units); 2.organic Agriculture Farmers Practitioners Association Of Bayawan City (ofprab) Villareal, Bayawan City, Negros Oriental – Brush Cutter (9 Units); Knapsack Sprayer (4 Units); Chain Saw (5 Units); 3. Siquijor Organic Farmer Practitioners Association - Helen, Larena, Siquijor – Brush Cutter (7 Units); Knapsack Sprayer (6 Units); 4.lgu Tuburan - Poblacion, Tuburan, Cebu - Knapsack Sprayer (9 Units). Delivery Period: Sixty (60) Calendar Days From Receipt Of Notice To Proceed (ntp). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project To Be Bid.similar Contract Shall Refer To Agricultural Machinery And Equipment. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 5. Interested Bidders May Obtain Further Information From Department Of Agriculture-regional Field Office 7- Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders November 5, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Of One Thousand Pesos (₱ 1,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 7. The Department Of Agriculture-regional Field Office 7 Will Hold A Pre-bid Conference On November 13, 2025-3:00 P.m. At Da Conference Room, Da Complex, Highway Maguikay, Mandaue City, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before November 25, 2025- 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause. 9. Bid Opening Shall Be On November 25, 2025 - 10:00 A.m. At Da-rfo 7 Da Conference Room, Da Complex, Highway Maguikay, Mandaue City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. The Department Of Agriculture Regional Field Office 7 Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 12. The Department Of Agriculture-regional Field Office 7 (da-rfo 7) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Bac Secretariat Department Of Agriculture Regional Field Office-7 Tel No. 032-2682698 Fax Number 032- 256-3063 (sgd.) Dr. Fabio G. Enriquez Bac Chairperson

Details: Description Construction Of 3-storey Additional Hospital Building In Brgy. Pagalungan 2024 -mo(2202) Item No. Qty Unit Description Of Articles Of Materials 1 1 Lot Supply Of Labor, Materials, Tools, Equipment And Other Incidental Expenses Necessary To Complete The Project For The Construction Of 3-storey Additional Hospital Building In Brgy. Pagalungan, Psc Item No. / Description / Quantity / Unit A.1.1(8) Provision Of Field Office For The Engineer 1.00 L.s. B.5 Project Billboard/signboard 1.00 Ea B.7(2) Occupational Safety & Health Program 1.00 L.s. B.9 Mobilization/demobilization 1.00 L.s. 803(1)a Structure Excavation (common Soil) 1,075.49 Cu.m. 804(1)a Embankment (from Excavation) 996.24 Cu.m. 804(1)b Embankment (from Borrow) 173.23 Cu.m. 804(4) Gravel Bedding 78.72 Cu.m. 900 Structural Concrete Class A (3000 Psi Ready Mix - 28 Days) 861.71 Cu.m. 901(1) Lean Concrete ( Ready Mix 28 Days) 44.31 Cu.m. 902(1) (grade 40) 903(2) Reinforcing Steel For Reinforced Concrete Structure 121,505.78 Kg Formworks And Falseworks 5,624.25 Sq.m. 1001(1)a 100mm Pvc Pipe Series 1000 (rain Water Drain) 110.00 M 1001(1)b 100mm Pvc Pipe Series 1000 (downspout) 363.50 M 1001(1)c 50mm Pvc Pipe Series 1000 (sanitary Line) 687.50 M 1001(1)d 100mm Pvc Pipe Series 1000 (sanitary Line) 723.50 Sq.m. 1001(6) Catch Basin (chb) 19.00 Unit 1002(3)a1 1"ø Polypropylene Random Copolymer (ppr-c)pn10 Water Supply Line 41.00 Pcs 1002(3)a2 1/2"ø Polypropylene Random Copolymer (ppr-c) Pn10 Water Supply Line 170.00 Pcs 1002(5) Water Closet With Complete Accessories 30.00 Set 1002(5)b 4"x4" Ss Floor Drain Plate 59.00 Set 1002(5)c Bedit, Lavatory Faucet, Faucet, And Two Way Nagle Valve With Complete Accessories 130.00 Pcs 1002(5)d Ss Grab Bar(swing Up And Grab Bar For Toilet And Grab Bar For Bathroom 87.00 Set 1002(5)e Two Way Faucet With Handshower 27.00 Set 1002(5)o Ss Steel Bath Towel Holder (60cm) 27.00 Set 1002(11)a Stainless Steel Sink With Complete Accessories 6.00 Set 1002(11)b Heavy Duty Janitorial Cart With 20l Mop Squeezer 4.00 Set 1002(11)c Stainless Linen Hamper (stainless Tubular Mounted On 4 Pcs Swivel Caster Wheel With Cover Canvass Bag(l-20", W- 20", H36") 3.00 Set 1002(14)a Lavatory With Wall Hung 40cm, X 70cm Pvc Cabinet (set) 34.00 Set 1002(14)a1 Ante Room 485x485x1400mm Ss Sink With Stand With Accessories. 3.00 Set 1003(1)a 4.5mm Fiber Cement Board On Metal Frame Ceiling 1,447.02 Sq.m. 1003(1)b 4.5mm Fiber Cement Board On Metal Frame Ceiling Roof Ceiling 442.32 Sq.m. 1003(1)g2 Ceiling (pvc Panel) On Metal Frame 31.19 Sq.m. 1003(3)a Built In Cabinet 96.46 Sq.m. 1003(3)b Wire Basket With Pull Out Rail White(80x55cm, Max Load -7kg, Materials - Steel, Polyestercoating Acetal Plastic 36.00 Set 1003(3)c Equipment Storage Metal Cabinet With Glass Door (l- 16",x W-31"x H-60") 3.00 Set 1003(3)d 5-layer Metal Ppe Rack ( L-35.5"x W- 13.75", H - 59") 3.00 Set 1004(2)a Losse Pin Hinges 200.00 Pair 1004(2)b Door Knob 750.00 Set 1006(5) Fire Rated Fire Exit Swing Steel Door With Panic Locking Device 12.60 Sq.m. 1007(1)a Powder Coated Aluminum Frame 6.0mm Clear Glass Swing Door 12.60 Sq.m. 1007(1)a1 Powder Coated Aluminum Frame 6.0mm Clear Glass Sliding Door 13.05 Sq.m. 1008(1)a Analok Frame Reflective Dark Gray Glass Fixed With Sliding Window 386.62 Sq.m. 1008(1)a1 Analok Frame Reflective Dark Gray Glass Sliding Window 10.95 Sq.m. 1008(1)c Analok Frame Reflective Dark Gray Glass Awning Window 36.99 Sq.m. 1010(2) Wooden Flush Swing Door 8.40 Sq.m. 1010(2)a Double Swing Wooden Flush Door With Ss Push Plate (back To Back) 65.52 Sq.m. 1010(2)b Double Swing Wooden Flush Door With View Glass And Ss Push Plate (back To Back) 7.56 Sq.m. 1012(1) Tempered Clear Glass Door In Powder Coated Aluminum Frame Swing Door 22.38 Sq.m. 1013(2)a Pre Painted Flashing 307.44 M 1013(2)c Pre Painted Gutter 78.12 M 1014 Pre Painted Metal Sheet (0.40mm Rib Type Long Span) 507.30 Sq.m. 1017 Roof Drain With Strainer 18.00 Set 1018(2) 0.60m X 0.60m Unglazed Granite Floor Tiles 1,479.54 Sq.m. 1018(2)a 0.40m X0.40m Unglazed Floor Tiles 343.79 Sq.m. 1018(2)b 0.60m X 0.60m Outdoor Rough Finish Floor Tiles With Stair Nosing 8.92 Sq.m. 1018(2)c 0.40m X0.40m Glazed Wall Tiles And Trims 917.55 Sq.m. 1018(2)d 0.30m X0.30m Glazed Wall Tiles And Trims 16.22 Sq.m. 1018(2)e 0.30m X0.30m Non-skid Floor Tiles For Stairs And Stair Nosing 170.19 Sq.m. 1018(2)f 12mm Thk. Solflex Slab 8.82 Sq.m. 1021(1)a Plain Cement Non-skid Floor Rough Finish With 5mm Groove On Ramp With Pwd Signage 415.05 Sq.m. 1027(1) Cement Plaster Finish 10,500.00 Sq.m. 1032(1)a Painting Works (masonry Painting) 10,667.00 Sq.m. 1032(1)b Painting Works (ficem Board Ceiling) 1,889.33 Sq.m. 1032(1)c Painting Works (wood Painting) 555.84 Sq.m. 1032(1)d Painting Works ( Metal Painting) 2,026.34 Sq.m. 1043(1) Pvc Doors And Frames 98.70 Sq.m. 1046 100mm Thk. Chb Non-load Bearing (including Reinforcing Steel) 3,965.00 Sq.m. 1047(2) Structural Steel ( Steel Ramp Columns And Beams) 21,031.41 Kg 1047(2)a Structural Steel (5.0mm X 4" X 2" Channel Bar Steel Ramp Floor Joist) 4,528.80 Kg 1047(2)b Structural Steel (5.0mm Checkered Plate Steel Ramp Flooring) 10,412.93 Kg 1047(2)c Structural Steel Purlins (cee Purlins And Facia Frames) 2,341.96 Kg 1047(2)c1 Structural Steel Purlins (purlin Cleat) 41.98 Kg 1047(3)a Metal Structure Accessories (anchore Bolt) 418.00 Pcs 1047(3)b Metal Structure Accessories (sag Rods &cross Bracing) 243.94 Kg 1047(3)c Metal Structure Accessories (turnbuckle) 30.00 Pcs 1047(5) Consstruc Metal Structure Accessories (steel Base Plate) 587.77 Kg 1047(6) Railings (ss Railings For Stairs Ss Pipe Sch. 10 And Rectangular Tubing For Roofdeck) 1.00 L.s. 1047(6)a Railings (2"ø Gi Pipe Sch. 20 Steel Ramp Railings) 1.00 L.s. 1100 20mm & 25mm Pvc Electrical Pipe 2,500.00 Lg 1100(1) Utility Box / Junction Box 1,622.00 Pcs 1101(2) 2.0mm², 3.5mm², 5.5mm² Thhn Electric Wire 13,200.00 M 1101(7) 38mm² Thhn Copper Wire With Terminal Lugs Long Barrel 90.00 M 1101(7)a 80mm² & 125mm² Thhn Copper Wire With Terminal Lugs Long Barrel 430.00 M 1101(7)b Pdx Wire 150.00 M 1101(8) Switches 182.00 Set 1101(16) Outlet (flush Type) And Acu Outlet 215.00 Set 1101(42) Rubber Tape, Electrical Tape, 20mmø Flexible Hose 900m , Triple Secondary Rack With Spool-15 Set 1.00 L.s. 1101(42)a Metal Cable Tray With Cover Including Bolts 1.00 L.s. 1101(42)b 25ft Concrete Pole 3.00 Lg 1102 Panel Board - 12 Branches , 3 Phase Connection With 100at Main Cb 1.00 Set 1102(1) Panel Board - 30 Branches , 3 Phase Connection With 100at Main Cb 3.00 Set 1102(1)a Panel Board - 30 Branches , 3 Phase Connection With 225at Main Cb 3.00 Set 1102(1)b Circuit Breaker - 15,20,30amp, 2-pole Bolt On Type 121.00 Set 1102(1)c Circuit Breaker - 60amp, 3-pole Molded Case 3.00 Set 1102(1)d Circuit Breaker - 100amp, 3-pole Molded Case 2.00 Set 1102(1)e Circuit Breaker - 300amp, 3-pole Molded Case 3.00 Set 1102(1)f Circuit Breaker - 750amp, 3-pole Molded Case 2.00 Set 1103 Led Strip Light 300.00 Pcs 1103(1) Round Surface Type Ceiling Led Light Panel 115.00 Set 1103(1)a 20cm X 40cm & 40cm X 40cm Led Surface Type Ceiling Light Panel 255.00 Set 1103(1)b 60cm X 60cm Led Surface Type Ceiling Light Panel 18.00 Set 1103(1)c Outdoor Wall Lamp 8.00 Set Auxiliary System 1105(1)a Network System (active) Supply, Delivery, Installation, Testing, And Commissioning, Rg-nbs 3100-48gt4sfp -p = 3 Set, Rg-nbs300-24gt4sfp-p = 2 Set,rg-nbs3100- 8gt2sfp-p = 1set 1.00 L.s. 1105(1)b Network System (wap) Supply, Delivery, Installation, Testing, And Commissioning Ua Ap-ac = 4 Sets 14.00 Set 1105(1)c Network System (passive) Supply, Delivery, Installation, Testing And Commissioning 1.00 L.s. Data Cabinet 42u With Pdu = 1set, Intermidiate Distribution Frame (idf) = 4 Set, Cable Manger 2u = 7 Set, Utf Cat6 Patch 48 Port Panelfully Loaded = 5 Set, Sfp Module = 5 Set, 1 Portwith Io Cat6 = 26 Set, 2 Port With 10 Io Cat6 = 48 Set, Rj 45=376 Set. Hdmi 30m = 2 Set, Fiber Patch Panel 24 Port = 4 Set, Fiber Backbone 24-core = 1 Set, Utp Cable Cat6, 305m = 44 Set, Faceplate With Duplex = 48 Set, Faceplate With Simplex = 26 Set, Surface Box = 74 Set, Lc-st Fiber Patchcord = 10 Set, Utp Patchcord 1.5m = 168 Set, Ups 1.5 Kva = 4 Set. 1105(1)d Voip - Telephone 1.00 L.s. Ip7ww Pabx Main Chassis = 1set, Sl2100 Main Processor Board = 1 Set, Entry Ip Phone = 23set, Model Ip Phone = 23set, Model Ip Phone = 12 Set, Ip Extension License For Ip Phone = 35set, Hybrid Extension Board + 3 Analog Trunks = 8set, Ip7ww-voippdb-c1 (voip Daughter Board) = 3set 1106(1) Cctv System 1.00 L.s. 4mp Bullet Camera Hi Watch Series = 10 Set, 2mp Dome Camera Hi Watch Series = 36 Set, 32 Channel Nvr = 2 Set, 8tb Hdd = 6 Set, 65" Tv = 2 Set. 1107(1) Paging System 1.00 L.s. Poe Wall Mount Speaker = 12 Set, Ip Network Ceiling Speaker = 26 Set, Network Pa Host 2u = 1 Set, Ip Network Paging Station = 1 Set, Desktop Computer = 1 Set 1200 Exhaust And Ceiling Fan 136.00 Unit 1200(1) Air Conditioning Units ( 4 Units - 1hp, 3 Units - 2 Hp Split Type 7.00 Unit Automatic Fire Sprinkler System. Fittings 1202(1)a 75mmø X 90° Elbow 38.00 Pcs 1202(1)b 65mmø X 90° Elbow 32.00 Pcs 1202(1)c 50mmø X 90° Elbow 43.00 Pcs 1202(1)d 40mmø X 90° Elbow 104.00 Pcs 1202(1)e 25mmø X 90° Elbow 890.00 Pcs 1202(2)a Tee Straight (40mm) 48.00 Pcs 1202(2)a1 Tee Straight (25mm) 184.00 Pcs 1202(2)b Coupling And Bushing Reducer (50 X 40) 12.00 Pcs 1202(2)b2 Coupling And Bushing Reducer (40 X 32) 18.00 Pcs 1202(2)b3 Coupling And Bushing Reducer (32 X 25) 72.00 Pcs 1202(2)b4 Coupling And Bushing Reducer (40 X 25) 32.00 Pcs 1202(2)b5 Coupling And Bushing Reducer (25 X 12.5) 244.00 Pcs 1202(2)b6 Slip On Flange (75mm) 40.00 Pcs 1202(2)b7 Slip On Flange (65mm) 4.00 Pcs 1202(2)b8 Slip On Flange (50mm) 8.00 Pcs 1202(2)c1 Blind Flange (75mm) 4.00 Pcs 1202(3)a Sprinkler Heads 218.00 Pcs 1202(3)b Alarm Test Valve (25mmø) 1.00 Pcs 1202(3)c Water Flow Switch (75mmø) 4.00 Pcs 1202(3)d 75mmø Gate Valve (flange Type) 5.00 Pcs 1202(3)d1 50mmø Gate Valve (flange Type) 2.00 Pcs 1202(3)d2 75mmø Check Valve (flange Type) 2.00 Pcs 1202(3)d3 50mmø Check Valve (flange Type) 2.00 Pcs 1202(3)d4 25mmø Ball Valve (screw Type) 14.00 Pcs 1202(3)h Inspector Valve (25mm) 5.00 Pcs 1202(3)h2 Inspector Test Connector ( Sight Glass 25mmø) 4.00 Pcs 1202(3)i Pressure Gauge (0-200 Psi) 1/4" 6.00 Pcs 1202(3)i1 Pressure Alarm Switch 1/2" 2.00 Pcs 1202(3)i2 Auxiliary Drain (50mmø And 32mmø 2.00 Pcs 1202(4) 75mmø Black Iron Pipe (sch. 40) 22.00 Pcs 1202(4)1 65mmø Black Iron Pipe (sch. 40) 26.00 Pcs 1202(4)1a 50mmø Black Iron Pipe (sch. 40) 15.00 Pcs 1202(4)1b 40mmø Black Iron Pipe (sch. 40) 31.00 Pcs 1202(4)1c 25mmø Black Iron Pipe (sch. 40) 114.00 Pcs 1202(10) Fdc Siamese Twin (65mmø X 65mmø X 150mmø With Cap And Chain) 1.00 Pcs 1202(11) Fire Hose Cabinet Fhc 100 Ft With Complete Accessories 8.00 Pcs 1202(12) Support, Hanger, And Paint (automatic Fire Sprinkler System) 1.00 L.s. 1202(12)a Consumables (automatic Fire Sprinkler System) 1.00 L.s. Fire Detection And Alarm System Active 1208 Conventional Aw- Cf2166- 4 Fire Alarm Panel 8 Zone 1.00 L.s. 1208(1) Conventional Repeater / Annunciator 3.00 Set 1208(1)a Conventional Aw- Csd381conventional Smoke Detector 64.00 Set 1208(1)b Conventional Aw-d135c Resettable Maual Call Point 16.00 Set 1208(1)c Conventional Aw-css2166- 2 Fire Strobe Siren 16.00 Set Passive 1208(1)d Tf Wire #18 Twisted Pair, Black And Red 30.00 Set Spl - 1 5000 Ltrs. Capacity Ss Cylindrical Water Storage Tank Horizontal ( Dia. = 187cm, L=268cm, H=197cm 1.00 Unit

Description: CATEGORY: Sterile eye patch with adhesive Disposable , Needle Atraumatic 6 mm 3 Oblique 8 circle Spatulated micro point 10O blique 0 Nylon monofilament pkt of 12 , Silk braided size 3Oblique 0 70 to 76 cm RB 3 Oblique 8 circle needle 45 mm , Polyamide Monofilament size 10 Dash 0 20 to 25 cms 3 Oblique 8 circle spatulated double needle 4 Oblique 6 mm. , Synthetic Absorbable Polygalactin 910 Oblique Polyglycolic Acid coated with Polycaprolate size 8 Dash 0 20 to 30 cm 3 Oblique 8 circle Micropoint 6 to 10 mm Spatulated Needle Double armed , Silk braided size 4 Oblique 0 70 to 76 cm RB 1 Oblique 2 circle needle 20 to 25 mm , 26G Hypodermic needle , 30 G hypodermic needle , Liquor Formaldehyde 40 Percent w Oblique v , Haemostatic sponge gelatin 80 mm long 50mm broad 10 mm thick , Catheter suction Endobronchial with terminal transparent non toxic PVC tubing size FG 14 length 50 cm , Combined Epidural Oblique spinal sets , Disposable gown , Pressure infusion Bags 1000 ml , Tube Endo Dash tracheal Catheter mount for , Strip indicators for sterilisation control for testing sterility of drums , Bandage open woven for plaster of paris 10 cm Maltiply 5 m , Dressing medicated adhesive 25 cm Maltiply 6 cm in a single strip pack , Dressing wound care occlusive and hydrocolloid dressing with flexible foam padding for optimum healing, 10 cm Maltiply 10 cm box of 5 , Dressing wound care occlusive and hydrocolloid dressing with flexible foam padding for optimum healing 20 cm Maltiply 20 cm box of 3 , Dressing extra thin wound care 10 cm Maltiply 10 cm box of 5 , Dressing post op medicated 6 Maltiply 7 cm pack of 100 dressings Flexigrid , Dressing postop medicated 10 Maltiply 12 cm pack of 50 dressings Flexigrid , Dressing sterile 4 x 4 inch box of 5 , Dressing collagen wound management material 5 ml Granules Collagen , Suspensory Scrotal , Transparent medicated wound dressing 15 Maltiply 20 cm box of 10 , Monofilament Polyglyconate Synthetic Absorbable Suture size 3 Dash 0 70 to 75 cm 1 Oblique 2 Circle Taper Cutting 20 Dash 30 mm , Synthetic Absorbable Polygalactin 910 Oblique Polyglycolic Acid coated with Polycaprolate size 1 Dash 0 70 Dash 90 cm 1 Oblique 2 circle RB 20 Dash 25 mm , Marking Pen , Under water seal drainage with Trocar Size 28 and 32 FG , Under water seal drainage with Heimlich valve , Spoon Finger Splint , Stax Mallet Finger Splint , Endo Bag Medium 200ml , Guide wire for catherisation , Orthopadic cotton cast padding roll , Paraffin sealing roll , Parasafe Pdr 1 kg , Sol Bacillocid 5 Ltr , Stapler remover disposable , Sterile swab sticks , Surgicel absortant hemostat Oxidised regenerated cellulose , Manometer Scales , Cotton Wool non Dash absorbent pkt of 500 gm , Functional Knee Support , Lint Absorbent Cotton , Silicone Folleys Catheter 6 FG , Hand Gloves size 7 pair of , Hand Gloves size 7 1 Oblique 2 pair of , Adhesive plaster zinc oxide 2 Point 5 cm Maltiply 1 mtr , Bandage Triangular , Bandage T Shaped , Pad Abdominal Swab 25 X 25 cm with tape 30 cm , Pad Abdominal Swab 40 X 25 cm with tape 30 cm , Abdominal Binder 10 , Button cell for digital thermometer , Cell for Glucometer , Diethyl Ether Solvent Bott of 500 ml , Laryngoscope cell 1 Point 5 V diameter 13 mm and length 51 mm for , Troponin T Test card

Description: Cond/scrap Alco Diesel Locomotive -vijayawada-pl No: 98112326 [hsn Code-86079100]. Cond/scrap Alco Diesel Locomotive No-11117 Wdm3d, 11123 Wdm3d And 11136 Wdm3d Of Dls/bza. Consisting Of-main Chassis-chassis Fuel Tank, Cattle Guard With Stay Rods, Mr Air Tanks, Engine Blocks, Cylinder Head Assembly, Cylinder Head Studs, Valve Leaver , Cylinder Liners, Fip Supports, Fips, Dampers, Vibration Damper Housings, Modified Steel Cap Pistons, Crank Shaft Gear, Crank Shaft Dampers, Crank Shaft , Cam Shaft Bushings, Cam Shaft Gears, S-pipes, Main Bearings, Gudgeon Pins, Connecting Rod Assembly, Fuel Control Shaft, Extension Shafts, Extension Shaft Gears, Turbo Super Chargers, Tsc Supports, Turbo Air Larger After Cooler, Lubricating Oil Pumps, Fuel Oil Header, Push Rods, Push Rod Spacer, Fuel Jumpers, Water Jumpers, Water Risers, C/r Bushing With Nut & Bolts, Copper Pipes, Engine Base Sumps, On Line Lube Oil Centrifuge, Piston Rings, System Pipes, Lube Oil Coller (ptloc), Fuel Oil Filter Housing, Fast Coupling, Flexible Coupling, Rttm Blowers, Lube Oil Filter Drum, Inter Cooler Air Compressor, Radiator2-core Modified, Air Compressor, Fttm Blowers, Horizontal Shaft With Pulley, Right Angular Gear Box With U-shaft, Truck Without Traction Motors And Wheel Sets, Bogie Frame, Equalizers, Compensating Beams, Vertical Links, Outer Coil Springs, Inner Coil Springs, Spring Seaters, Brake Cylinders, Brake Hanger With Brake Heads, Brake Cylinder Pipes, Fish Plates, Re Silent Pads, Pull Rods, Slack Adjuster Assembly, Stay Plate, Gear Case, Vertical Dampers, Latter Dampers, Axle Boxes, Hnbc With Bearings, Hand Brake Assembly, Engine Hood Consisting Of - Power Pack Hoods, Driver Cabins, Radiator Compressor Hoods, Radiator Fan With U-shaft And Pedestal, Fuel Oil Gauge, Water Expansion Tank, Traction Alternator Without Brush Arm, Exciter Generator Without Brush Arm, Traction Motors, Armature With Fittings, Bkbl, Power Cables, Control Wires, Ccem, Dem, Water Pump, Pe End Shield With Bearing, Ce End Shield With Bearing, Pinion, Lube Oil Pump, Ost Unit, Ep Contactors, Control Drums, Fpm, Bkt, Rev, Gf Contactor, Resister Grid, Rectifier, Wood Ward Governor Base, Head Light, Classification Light, Ecc Drum Brush Holder, Cranking Contactor, Flasher Light, Speedometer With Pulse Generator, Air Maize, Exhaust Manifold Set, J-filter Housing, Load Pad, Miscellaneous With All The Above Items Contains ¿ferrous-264258.93kg, Copper-23291.64kg, Brass-2710.08kg, Aluminium-1235.04kg, Total Qty-291.496 Mt. (these Weights Are Obtained As Per Ds-8). All Weights Are Given By The Custodian. The Locomotive Is Available At Compound Of Dls/bza. Under Control Of Sse/loco/bza. Sold On Number Basis And Delivery On By Lot Basis. Cutting Is Permitted For Loading Purpose. This Locomotive Consisting Of Rc- Items-1) Wheel Sets With Bull Gear Suspension Tube-18-nos. 2) 8v 450/500 Ah Lead Acid Batteries -24nos.3) Loco Side Buffers-12nos, 4) Cbc Coupler Unit With Draft Gear-06nos. Note-a) The Above Rc-items Should Return To The Railways Before Effecting The Delivery Of The Cut Parts Of The Locomotive. B) The Purchaser Should Keep The Similar Items As Separate Heap. C) The Purchaser Must Clean The Cutting Area After Completion Of Delivery. Ds-8 No: 236200019/20/21. Dt.14/09/2024.

Details: Description Brand New 2024 Pickup Truck (diesel Type) Engine: 2.5 L Diesel, In-line 4 Cylinder, 16 Valve Dohc With Variable Turbocharger (vgs) And Intercooler; Engine Displacement 2488cc; Maximum Output (ps/rpm) 190/3,600; Maximum Torque (nm/rpm) 450/2,000; Fuel Tank Capacity 80 Liters; 2 Wheel Drive (2wd) System; Transmission: 7 Speed A/t With Manual Mode Transmission; Interior: Driver Seat Zero Gravity Type With 8-way Power Adjust; Front Passenger Seat Zero Gravity Type With 4-way Manual Adjust; Rear Passenger With Armrest; Instrument Meter Cluster High Contrast W/7” Advanced Drive- Assist Display; Rear View Mirror Auto-dimming; Exterior: Headlights Quad Led Projector; Daytime Running Lights Led; Function: Keyless Entry System W/ Intelligent Key System; Push Button Engine Start / Stop System; Air Conditioning System Dual Zone Automatic Climate Control With Rear Vents; Audio Type Advanced Touchscreen Display; Audio Connectivity Apple Carplay / Android Auto / Bluetooth /usb (type A & Type C) Ipod Power Windows; Power Door Locks With Speed Sensing & Driver Side Lock/unlock Switch; Safety: 6 Srs Airbags Anti-lock Brake System (abs); Parking Sensors; Seat Belt Font & Rear; Anti-theft System Alarm And Engine Immobilizer; Chassis: Front Brake: Ventilated Disc; Rear Brake: Drum Type; Tires 255 / 65 R17; 17” Black Alloy Wheels; Front Suspensions: Independent Double Wishbone With Coil Spring & Stabilizer Bar; Rear Suspensions: Multi-link With Dual Rate Coil Spring And Stabilizer Bar; Overall Dimension (l X W X H) 5260 X 1875 X 1875; Steering Type: Power Assisted; 5 Person Seating Capacity; Intelligent Mobility: Blind Spot Warning; Lane Departure Warning; Hill Start Assist; Intelligent Around View Monitor With Moving Object Detection; Inclusions: Early Warning Device (ewd), Full Tint, Rust Proof, Three (3) Years Warranty Or 100,000 Km, Whichever Comes First, On Parts And Services. Free Labor On First 1,000- & 5,000-kilometers Periodic Maintenance, At Least One (1) Year Comprehensive Insurance, Three (3) Years Lto Registration, Freebies: Matting, Basic Tools And Fuel

Details: Description Invitation To Bid The Municipality Of Hindang, Leyte Through Its Bids And Awards Committee (bac) Invites The Philgeps Registered Vehicle Suppliers To Apply To Bid For The Procurement Of 1 Unit Brand New 2025 Utility Van Vehicle Cab Specifications: 1 Unit Brand New 2025 Utility Van Vehicle Cab Overall Length Mm 4,440 Overall Width Mm 1,695 Overall Height Mm 1,915 Wheelbase Mm 2,350 Ground Clearance Mm 195 Max Gross Vehicle Weight Kg 2,345 Curb Weight Kg 1,130 Engine Type (4n14) 2.2l 4 In Line 16valve Dohc With Turbocharged Intercooler System Fuel System Electronic Common Rail Direct Injection Displacement Cc 2268 Maximum Power Ps 99.25/3500 Maximum Torque Nm 200/1000-3500 Suspension: (front/rear): Independent Wishbone And Coil Spring / Semi Elliptic Leaf Spring Brakes Front 10" Ventilated Disc Rear 10" Leading And Trailing Drums Steering Gear Type Ball And Nut Gear Type With Power Steering Steering Wheel 2 Spoke Polypropylene Wheels & Tires: Tires 185r14c-8pr Wheels 14x5.0j Steel Rims Inclusions: 1 Yr. Gsis Insurance, 3 Years Lto Registration Municipal Logo Early Warning Device, Tint, Seat Cover & Matting Warranty: 3 Years Warranty Or 100,000kms Whichever Comes First Interested Bidders May Purchase Bid Documents At The Municipal Treasurer's Office In The Amount Of Php 5,000.00 On Or Before December 9, 2024. Bids Must Be Duly Received By The Bac Secretariat On Or Before December 9, 2024. At 8:30 A.m. (pst) Bid Opening: December 9, 2024 @ 9:00 A.m. Venue: Conference Room, Lgu Hindang, Leyte Pre Bid Conference: November 22, 2024 9:00 Am At The Lgu Hindang Conference Room The Bids And Awards Committee (bac) Of Lgu Hindang, Leyte Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Mr. Dexter R. Sarcon Bac Chairman

Details: Description Item No. Qty Unit Of Issue Item & Description (specifications) 1 1 Unit Brand New Excavator (backhoe) Minimum Specifications: Engine Type: 4 Stroke, 4 Cylinder, Diesel Fed Power Output: 147kw/2100 Rpm Emission: Tier 3/stage 3a Bore X Stroke: 115x125mm Displacement: 5.193 Liter Cooling System: Water Cooled Valve Train: Ohc Injection: Direct Injected Dimensions: (mm) A. Overall Transport Length: 7690 B. Overall Width: 2490 C.overall Height (to The Cab Roof): 3200 D. Overall Height (travelling): 3610 E. Track Gauge: 1944 F. Wheelbase: 2800 G. Minimum Ground Clearance: 360 H. Tail Swing Radius: 2310 I. Counterweight Ground Clearance: 1230 J. Bulldozing Plate With: 2490 Performance: (standard) Operating Weight: 13500 Bucket Capacity: 0.58cu.m. Rate Power: 120/2000 Travel Speed(fast/slow): 37/10 Kph Rotation Speed: 12.3 Gradeability: 70%/350 Bucket Digging Force:75.2 Tires: 10.00x20 14pr Dual Operation Range: (mm) A. Max Digging Height: 8600 B. Max Unloading Height: 6200 C. Max. Digging Depth: 4800 D. Max Digging Radius:7960 E. Max Ground Digging Radius: 7750 F. Max Height At Min Rotation Radius: 6800 G. Max Vertical Digging Depth: 4390 H. Min. Rotation Radius: 400 X-x-x-x-x-x-x-x-x-x-x-x-x-x A Complete Set Of Bidding Documents May Be Acquired By Interest Bidders On November 8-28, 2024 From The Office Of The Mayor, 2nd Floor, Municipal Hall, Poblacion, Itogon, Benguet And The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (php10,000.00). In Acquiring A Bid Documents And Submits On The Opening, The Procuring Entity Shall Allow The Bidder Its Duly Authorized Representative Accompanied By A Duly Notarized Spa, In Case Of A Corporation, A Secretary’s Certificate Is Sufficient. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On The Opening Date At 9:00a.m. Late Bids Shall Not Be Accepted.

Details: Description Bids And Awards Committee Invitation To Bid The Sangguniang Barangay Barangka, Through Its Committee On Bids & Awards, Hereby Invites All Interested Parties To Submit Sealed Bid For The Hereunder Project: Name Of Project: Purchase Of 1 Unit Barangay Service Vehicle Approved Budget For The Contract: Php 1,400,000.00 Delivery Of Goods: 7 Days Brief Description: Brief Description: - Engine:2.8l,4-cylinder,16-valve Dohc - Transmission Type : Automatic - Fuel : Gasoline - No. Of Doors: 5 - Seating Capacity : 8 Seaters Prospective Bidders Should Experience Undertaking Have A Similar Project With A Value Of At Least 50% Of The Abc Available For The Prosecution Of The Contract. The Abc Will Use Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of The Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of Ra 9184 And Its Revised Implementing Rules And Regulations (irr). Complete Sets Of Eligibility Requirements And Bid Documents May Be Obtained At The (bac Secretariat), Barangka Barangay Hall. Duly Accomplished Eligibility Forms Shall Be Submitted In Sealed Envelope Addressed To The Bac Chairman, C/o Bac Secretariat. The Schedule Of Bidding Activities Are As Follows: Activities Schedule 1. Receipt From Prospective Bidders Of Letters Of Intent (loi) November 19-22 , 2024. 2. Issuance Of Bid Form November 19-29, 2024. 3. Deadline For Submission Of Eligibility Requirement And Bids Is On December 3 ,2024 Not Later Than 9:00 Am. 4. Pre-bid December 3 ,2024 At 9:00 Am 5. Opening Of Bids In Sealed Envelope At Barangka Barangay Hall, December 6 , 2024, 8:00 Am. 6. Bid Evaluation December 9 ,2024 7. Post Qualification December 9, 2024, 8. Issuance Of Notice Of Awards December 10 , 2024. The Bac Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Bid & Reserves The Right To Accept Or Reject All Bids Or Part Thereof, To Waive Formality Therein, Or To Accept Such Bids Or To Award Any Work That Is Considered Most Advantageous To The Barangay Barangka, Marikina City Nestor A. Borja Bac Chairman

Details: Description Republic Of The Philippines Province Of Samar Municipality Of San Jorge Invitation To Bid For Purchase Of Life Saving Materials And Equipment 1. The Lgu-san Jorge, Samar, Through General Funds Intends To Apply The Sum Of One Million Four Hundred Twenty-seven Thousand Seventy-one Pesos (php 1,427,071.00) Being The Abc To Payments Under The Contract For Purchase Of Life Saving Materials And Equipment Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Select This For Lot-procurement: The Lgu-san Jorge, Samar, Through General Fund Intends To Apply The Sum Of One Million Four Hundred Twenty-seven Thousand Seventy One Pesos (php 1,427,071.00) Being The Abc To Payments Under The Contract For Purchase Of Life Saving Materials And Equipment Total Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Item Quantity Unit Of Item Description Estimated Estimated No. Issue Unit Cost Cost 1 25 Set Personal Protective Equipment 2 3 Set Tent Canvass 3 10 Pcs Fire Extinguisher 4 2 Pcs Adult Manikin With Cpr Monitor 5 2 Pcs Infant Manikin With Cpr Monitor 6 2 Pcs Full Body Harness 7 1 Set Battery Operated Portable Chainsaw 8 1 Set Portable Generator 4500w (diesel) 9 1 Pc Generator 9.5kva (diesel) 10 2 Pcs Bag Valve Mask (bvm) Adult 11 2 Pcs Bag Valve Mask (bvm) Infant 12 1 Pc Single Phase Motor Siren Ac-10w 13 10 Pcs Led Head Lamp 14 4 Pcs Recue 8 Ring 15 4 Pcs Rescue Pulley 16 15 Pcs Aluminum Twistlock Carabiner (automatic) 17 1 Pc Basket Stretcher 18 4 Pcs Cervical Collar 19 1 Pc Stihl Chain Saw 20 1 Pc Reflective Water Floating Pp Water Rope (100m) 21 2 Sets Trauma Bag With Contents 22 1 Pc Command Post Tent 23 50 Pcs Evacuation Tent 24 50 Pcs Heavy Duty Rain Coat 2. The Lgu-san Jorge, Samar Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By To Be Delivered Within 15 Calendar Days. Bidders Should Have Completed, Within 2 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Lgu – San Jorge, Samar And Inspect The Bidding Documents At The Address Given Below During Office Hours. 5. Interested Bidders Can Acquire A Complete Set Of Bidding Documents From November 15, 2024, To December 10, 2024, From 8:00am To 5:00pm, And On December 10, 2024, Until 11:00am Only From The Given Address Below And Upon Payment Of None Refundable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00).the Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Be Presented In Person. 6. The Lgu- San Jorge, Samar Will Hold A Pre-bid Conference On November 25, 2024 @ 2:00pm At The Bac Office, San Jorge Samar, Which Shall Be Open To Prospective Bidders 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, On Or Before December 10, 2024 @ 1:00pm Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 @ 2:00pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Submit 3 Copies Of Illegibility And Technical Documents And Financial Documents. One Original Copy Each And Two Photo Copy Each. 11. The Lgu-san Jorge, Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Josefina B. Rollo Bids And Awards Committee, Secretary Municipal Hall, San Jorge, Samar 6707 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Not Applicable For Online Bid Submission: Not Applicable. February 14, 2024 Engr. Arthur M. Porcil Bac Chairperson