Valve Tenders

Description: Providing And Fixing Sluice Valve And Gate Valve With Labor And Matrerial At Site Ward No. 48 File No. 43/24x9/1, 2nd Call

Description: Contract notice – general guideline, standard rule, open procedure (construction work) Mps Hartenrod, replacement new sports hall, sewage, water and gas systems, material delivery free to construction site as well as complete assembly and acceptance-ready commissioning of all the systems. Roof and emergency drainage as high-pressure and gravity drainage, sewage and drinking water systems, TW system with decentralized hot water preparation, rainwater utilization system, sanitary fixtures for changing rooms and showers. 1 piece automatic rainwater supply and fresh water refill system as a compact module, flow rate 2.5 m³/h including connection to cistern approx. 3 pieces rainwater drains up to DN100 including accessories and heating approx. 125 m cast iron pipe inside as roof and emergency drainage DN 50-200 approx. 200 pieces cast iron molded parts as roof and emergency drainage DN 50-200 approx. 125 m insulation aluminum-laminated mineral wool and partially with sheet metal sheathing approx. 250 pieces connectors for socketless cast iron pipe systems with accessories approx. 100 pieces claw rings with rounded claw teeth made of stainless steel approx. 75 m pipe waste water pipes cast iron pipe DN 50-100 approx. 200 pieces cast iron molded parts waste water pipes and PE pipe DN 50-100 Approx. 275 connectors for socketless cast iron pipe systems with accessories Approx. 50 m waste water pipes inside as HT pipe DN 50-100 Approx. 250 HT pipe fittings DN 50-100 Approx. 24 creating underground pipe connections to waste/rainwater Approx. 3 floor drains DN 100 including accessories for technical rooms Approx. 500 m stainless steel system pipe drinking water with approx. 250 press sleeves DN 12 - DN 40 Approx. 500 bends and approx. 250 other stainless steel system pipe fittings Approx. 500 m insulation aluminum-coated mineral wool and partially with sheet metal sheathing Approx. 25 valves and shut-off fittings DN 12 - DN 40 1 TW house connection DN 32 with accessories backwash filter, water meter set Etc. Pressure tests in accordance with DIN EN 806-4 TW water analysis including flushing and commissioning of the entire drinking water system Approx. 100 kg of structural steel for the manufacture of guide structures Approx. 50 m of mounting rails up to 41 mm Approx. 25 wall brackets including accessories Approx. 750 connections to wooden ceiling Approx. 25 core drillings 80 to 220 mm with closing of the surrounding annular gap Approx. 25 installation of fire pipe seals including closing of the surrounding annular space 1 toilet system with shower with mounting elements fully in accordance with DIN 18040 2 electronic toilet flushing systems including folding support handles 12 standard flush-down toilet systems including mounting elements and accessories 2 waterless urinals including mounting elements and accessories 16 hand ash basins for showers and toilet rooms including mounting elements And accessories 16 x single-lever stand mixers 2 x mix self-closing stand mixers 16 x electronic interval stand mixers 15 x showers as shower panels for sports facilities including equipment and accessories 11 x electronic instantaneous water heaters Flat rate adjustment and commissioning of all supplied systems Flat rate instruction for users/operating personnel Flat rate assembly/work planning including static proof of fastening technology Flat rate electronic connection of installed devices/components, i.e. laying, inserting and laying down cables provided by the customer Flat rate preparation and delivery of inspection/inventory documents Flat rate maintenance - sample maintenance contract up to 4th warranty year Mps Hartenrod replacement new sports hall sewage, water and gas systems Material delivery free to construction site as well as complete assembly and acceptance-ready commissioning of all systems. Roof and emergency drainage as high-pressure and gravity drainage, wastewater and drinking water systems, TW system with decentralized hot water preparation, rainwater utilization system, sanitary fittings for changing rooms and showers. 1 piece automatic rainwater supply and fresh water refill system as a compact module, flow rate 2.5 m³/h including connection to cistern approx. 3 pieces rainwater drains up to DN100 including accessories and heating approx. 125 m cast iron pipe inside as roof and emergency drainage DN 50-200 approx. 200 pieces cast iron molded parts as roof and emergency drainage DN 50-200 approx. 125 m insulation aluminum-laminated mineral wool and partially with sheet metal sheathing approx. 250 pieces connectors for socketless cast iron pipe systems with accessories approx. 100 pieces claw rings with rounded claw teeth made of stainless steel approx. 75 m pipe waste water pipes cast iron pipe DN 50-100 approx. 200 pieces cast iron molded parts waste water pipes and PE pipe DN 50-100 Approx. 275 connectors for socketless cast iron pipe systems with accessories Approx. 50 m waste water pipes inside as HT pipe DN 50-100 Approx. 250 HT pipe fittings DN 50-100 Approx. 24 creating underground pipe connections to waste/rainwater Approx. 3 floor drains DN 100 including accessories for technical rooms Approx. 500 m stainless steel system pipe drinking water with approx. 250 press sleeves DN 12 - DN 40 Approx. 500 bends and approx. 250 other stainless steel system pipe fittings Approx. 500 m insulation aluminum-coated mineral wool and partially with sheet metal sheathing Approx. 25 valves and shut-off fittings DN 12 - DN 40 1 TW house connection DN 32 with accessories backwash filter, water meter set Etc. Pressure tests in accordance with DIN EN 806-4 TW water analysis including flushing and commissioning of the entire drinking water system Approx. 100 kg of structural steel for the manufacture of guide structures Approx. 50 m of mounting rails up to 41 mm Approx. 25 wall brackets including accessories Approx. 750 connections to wooden ceiling Approx. 25 core drillings 80 to 220 mm with closing of the surrounding annular gap Approx. 25 installation of fire pipe seals including closing of the surrounding annular space 1 toilet system with shower with mounting elements fully in accordance with DIN 18040 2 electronic toilet flushing systems including folding support handles 12 standard flush-down toilet systems including mounting elements and accessories 2 waterless urinals including mounting elements and accessories 16 hand ash basins for showers and toilet rooms including mounting elements And accessories 16 single-lever stand fittings 2 mixed self-closing stand fittings 16 electronic interval stand fittings 15 showers as shower panels for sports facilities including equipment and accessories 11 electronic instantaneous water heaters Flat rate adjustment and commissioning of all supplied systems Flat rate instruction for users/operating personnel Flat rate assembly/work planning including static proof of fastening technology Flat rate electronic connection of installed devices/components, i.e. the setting down, insertion and laying of the cables brought in by the customer Flat rate creation and delivery of inspection/inventory documents Flat rate maintenance - sample maintenance contract up to 4th warranty year

Description: Acquisition of cardiac valve prostheses, coronary stents, occlusive devices, pacemakers, implantable automatic defibrillators and implantable Holters with transfer of equipment, as well as associated consumables for the centers dependent on the Balearic Islands Health Service.

Description: Iron And Steel Scrap Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 4.in Bvzc Wagon Lb Springs To Be Cut Marked Before Delivery To Ensure Non-recycling Of Material. 5. To Be Sold On "as Is Where Is Basis"

Description: P.l No. 98050047. Scrap C & W Fittings Consisting Of Bolster Hanger ,anchor Link, Buffer Flange, Equalising Stay, Brake Head, Striker Block, Face Plate, Spare Parts Of Brake Cylinder, Traction Motor Frame, Knuckle, Cbc, Cbc Coupler, Axle Box, Laminated Pole Shoe, Housing, Rear Cover, Suspension Tube, Brake Beam, Dash Pot, Buffer, Oil Thrower, Top Casting, Brake Cylinder(ferrous), Bottom Casting, Lower Spring Beam, Oxy Cut Ferrous Ball Bearing, Misc. Spares Parts Of Valve & Cock Pantograph, Screw Coupling, Yoke , Hand Bar, Pull Road, Cam Shaft, Axle Cap, Ferrous Bearing Of Sorts And Sizes, Ferrous Part Of Different Type Of Valve, Collar, Ring, Racer, Socket Head ,jumper Head, Felt Ring, Ms Cylinder, Buffer Casing, Draw Bar Hook, Hanger Block, Chain Bolt, Chute Plate, Wear Plate, Flap Plate, Draft Gear, Gear, Pinion, Impeller, Shaku Coupler Parts, Traction Motor Parts, Nut Bolts, Pin, Icf Bogie Component And Misc. Ferrous Etc. As Available In Lot. Qty-154mt. Location-east Of Vm Road In Ncb-08. Nb: Delivery To Be Made In Actual Weighment Basis Through Lorry.

Description: Aoh Overhauling Kit For D1 Type Drain Valve Of M/s Trident Pneumatics Pvt Ltd., Magnet Valve In Triplate Panel.

Description: Procurement Of Motor Operated Concentric Butterfly Valves (4inx150) For Hvlr Monitors And Api 6d Plug Valves(10inx150) For Separator Filters At Nrpl Bijwasan And Associated Service Jobs During Installation.

Description: Bmi_t1183_proc Of Valves Grease Sealents

Description: P.l No.98327008.scrap Machinery Parts Consisting Of Ci Shock Absorber Cleaning Tank , Hydraulic Dimensional Lifting Table, Shaft Pinion , Gears Etc. Hydraulic Lifting Table, Allied System Consisting Hyde Gear Pump Assy, Link Chain Etc. Moulding Box & Other Foundry Components, C&w Item, Gear Pump, Assy, Dcr Valve Assly, Loco Component, M/c Parts, Turbo, M/c Parts, Tower Car, Like Compressor, Push Rod Etc. Traverse Beam, Craper, Chain Finger Plate Etc. Impeller, Sleav, Bush, Shaft Etc. Snatch Block & Hook, Ring & Hook Of Slings Etc, Gear Box, Gear, Pulley, Deep Trolley, Wheel, Hook, Brake Shoe Etc, Various Wire Plate, Chain, Eigi Compressor Turbo Part, T/beam Thrust Plate, Wear Plate, Lifting Roller, Chute Assly, Clutch Plate, Ci Slice Valve, Vibration Shaft, Lifting Roller, Expresser, Forges Smith Circular Ci Block Stand, Tamping Tools Broken, Ci Stand For Iron Bar, Balance Weight, Ci Bases And Cover Of Various Type Of Machines, Ms Slab, Ms Base Etc. Qty-57mt. Location- West Of Vm Road In Ncb-21. Nb :(1) Cutting Is Allowed For Loading Purpose Only. (2)delivery To Be Made In Actual Weighment Basis Through Lorry.

Description: Gasket Copper Low Pressure Valve