Valve Tenders

Details: Description 1 Unit - Pump Irrigation System From Open Source (pisos) Specifications: Pump: 3"x3" Non-self Priming Prime Mover: 7hp (minimum) Water-cooled Diesel Engine Pump And Engine Are Both Mounted On A Common Steel Base, With Pulleys And Belts Accessories: 1 Pc Flexible Hose, Steel Belted, 3in. Diameter X 20 Inches 1 Pc Foot Valve, 3in. Diameter, Cast Iron (ci) 2 Pcs Hose Adaptor, 3in. Diameter 2 Pcs Elbow, 3in. Diameter X 90 Degrees, Galvanized Iron (gi), Standard 4 Pcs Hose Clamp 3in. Diameter 2 Pcs Nipple 3" X 12" Schedule 40, Galvanized Iron (gi) 1 Roll Duct Hose, 3in X 100meters Inclusions With Amtec Test Result For Both Engine And Pump (coupled) Warranty: One (1) Year Training: Operation And Maintenance Training On Site. Testing And Demo On Site. 1 Unit - Walking Type Hand Tractor Specifications: Prime Mover: 12hp (minimum) Air-cooled Diesel Engine 60:60 Transmission (chain And Sprocket) Peak Transmission Efficiency (minimum): 88% Field Efficiency (minimum) 88% Average Width Of Tillage (minimum): 575 Mm Accessories: One Pair Cage Wheel, 24in X 16in (minimum) One Pair Spiral Plow, 20in X 8in (minimum) One Set Comb Harrow Or Leveling Rake One Unit Heavy Duty Trailer (suspension: Combination Of Leaf Spring And Coils Spring) One Pair Brand New Pneumatic Tires Inclusions With Amtec Test Result For Both Engine And Pump (coupled) Warranty: One (1) Year Training: Operation And Maintenance Training On Site. Testing And Demo On Site. Place Of Delivery Arbo: Batang Pamplona Agrarian Reform Beneficiaries Association (bparba) Inc. Address: Batang, Pamplona, Camarines Sur Feed Milling Equipment 1 Unit - Hammer Mill / Corn Craker Specifications: Dimensions (minimum): 57cm X 40cm X110cm Weight (maximum): 50 Kg Capacity (minimum): 150kg/hr Prime Mover: 2.2 Kw Electric Motor 1 Unit - Pulverizer With Cyclone Collector Specifications: Dimensions (minimum): 83cm X 58cm X106cm Weight (maximum): 54 Kg Capacity (minimum): 15-120kg/hr Prime Mover: 2.2 Kw Electric Motor Screen Sizes: 0.6mm,1mm, 3mm & 5mm 1 Unit - Feed Mixer Specifications: Mixing Bin: Stainless Steel Capacity: 50-100kg/batch Prime Mover: 2.2 Kw Electric Motor 1 Unit - Feed Pelletizer Specifications: Type: 3-roller Capacity: 50-100kg/batch Prime Mover: 5hp Electric Motor, Single Dimensions: 86cm X 33cm X 70cm Weight W/ Motor (maximum): 105kg Die Plate Sizes: 3mm, 4mm & 6mm Inclusions Warranty: One (1) Year Training: Operation And Maintenance Training On Site. Testing And Demo On Site. Place Of Delivery Arbo: Mantalisay Libmanan Agrarian Reform Beneficiaries Association (mlarba) Inc. Address: Mantalisay, Libmanan, Camarines Sur 1 Unit - Coco Decorticator Specifications: Input Capacity: 800-1500 Kg/hr With Separate Output Chute For Coco Fiber And Coco Peat Belt-driven Prime Mover: 16-18hp Air-cooled Diesel Engine (with Amtec Test Result) Inclusions Warranty: One (1) Year Training: Operation And Maintenance Training On Site. Testing And Demo On Site. Place Of Delivery Arbo: Masaganang Buhay Farmers And Agrarian Reform Beneficiaries Association, Inc. Address: Aldezar, Sipocot, Camarines Sur 1 Unit Forage Chopper Specifications: Dimensions: 136cm X 91cm X 143cm Weight (maximum): 175kg Capacity: 700-1000kgs/hour Prime Mover: 12-14hp Air-cooled Diesel Engine Inclusions With Amtec Test Result Both Engine And Machine Coupled Warranty: One (1) Year Training: Operation And Maintenance Training On Site. Testing And Demo On Site. Place Of Delivery Arbo: Catabangan Proper Agrarian Reform Beneficiaries Organization (cparbo) Address: Catabangan Proper, Ragay, Camarines Sur

Details: Description Republic Of The Philippines Province Of Northern Samar Municipality Of Lapinig Bids And Awards Committee Invitation For Negotiated Procurement Improvement Of Level Iii Water System Goods-np2024-018 1. In View Of The Two (2) Public Biddings, The Municipal Government Of Lapinig, N. Samar Through Its Bids And Awards Committee (bac) Invites Interested Bidders To Participate In The Negotiation For The Project, “improvement Of Level Iii Water System” In Accordance With Section 53.1 Of The Revised Implementing Rules And Regulations (irr) Of Republic Act (r.a.) No. 9184, Otherwise Known As The “government Procurement Reform Act.” The Approved Budget For The Contract (abc) Is Three Hundred Sixty-three Thousand Seven Hundred Fifty-five Pesos Only (php 363,755.00). For More Details On This Project, Please Refer To Attached Schedule Of Requirements (annex A) And Technical Specifications (annex B). 2. The Following Eligibility And Technical Documents, As Well As The Financial Proposal Form (annex C) Shall Be Submitted On December 06, 2024, Before 1:00 Pm At The Conference Room, Annex Bldg. Mun. Hall, Lapinig, N. Samar: A. Philgeps Membership Certificate (platinum) Or In The Absence Of Philgeps Certificate, Bidder May Opt To The Following: I. Dti Business Name Registration Or Sec Registration Certificate Or Cooperative Development Authority. Ii. Valid And Current Mayor’s Permit/license To Operate Iii. Tax Clearance Per Executive Order 398, Series Of 2005 As Finally, Reviewed And Approved By The Bir. Iv. Audited Financial Statements B. Statement Of All Ongoing Government And Private Contracts C. Bid Security Issued In Favor Of The Municipal Government Of Lapinig Shall Be Either In The Following Forms And Amount: I. 2% Of The Abc, If Cash Or Cashier’s//manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Ii. 5% Of The Abc, If Survey Bond With Certification From Insurance Commission That Such Insurance Company Is Authorized To Issue Such Security; Iii. Bid Securing Declaration. Sample Form Is Attached As Annex D. D. Compliance With The Schedule Of Requirements (annex A) And Technical Specifications (annex B); E. Notarized Omnibus Sworn Statement (form – Annex E); F. Authority Of The Signatory; 3. Opening Of The Eligibility Documents, Technical Documents And Financial Proposal Will Be On December 06, 2024, Before 1:00 Pm. 4. For Further Information, You May Contact Bac Secretariat At 09526174315 From 8:00 A.m. To 5:00 P.m. (working Days And Hours Only). 5. The Municipal Government Of Lapinig Northern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 6. For Further Information, Please Refer To: Ma. Devorah D. Cidro Bac Secretariat Municipal Budget Office, 2nd Floor, Mun. Hall, Lapinig,northern Samar Cp # 09526174315 (sgd)engr. Angeles M. Maestre Bac Chairperson Description Qty. Uom Total 63mm Upvc Ball Valve 18 Pcs 63mm Upvc Elbow Threaded Both Side 30 Pcs 63mm Upvc Male Adapter 30 Pcs 63mm Upvc Nipple 30cm Length 30 Pcs 75mm Upvc Tee 20 Pcs 75mmx2mm Upvc Coupling Reducer 20 Pcs Upvc Pipe 75mm, Series 10 For Potable Water 5 Pcs Upvc Pipe 63mm, Series 10 For Potable Water 25 Pcs 32mm Pe Pipe, 60meters 2 Roll 32mm Pe Pipe Coupling 2 Pcs 40mm Pe Pipe, 60meters 8 Roll 40mm Pe Pipe, Coupling 10 Pcs 75mmx32mm Pe Pipe Coupling Reducer 4 Pcs Cement Solvent 20 Cans Teflon Tape1" 10 Roll 12mm Square Bar 81 Pcs 10mm Square Bar 81 Pcs 4" Cutting Disc 2 Box 4" Grinding Disc 5 Pcs Welding Rod 6013 10 Kgs Epoxy Primer 1 Gal Qde Red 2 Gal Lacquer Thinner 1 Gal 1/2" Paint Brush 2 Pcs Baby Roller 2 Pcs Cement 10 Bgs. Sand 2 Cu.m.

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Barangay San Julian Bids And Awards Committee Invitation To Bid For Water Tank For Purok 4b The Barangay Local Government Unit Of San Julian, Through The Barangay Supplemental Fund, Intends To Apply The Sum Of Seventy-three Thousand Six Hundred Eighty-one Pesos Only (₱ 73,681.00) Being The Approved Budget For The Contract To Payment Under The Contract For The Supply/delivery Of Hardware/materials For The Water Tank For Purok 4b. Bids Received In Excess Shall Be Automatically Rejected To Bid Opening. Good-01-2024 Name Of Contract: Water Tank For Purok 4b Brief Description: 10-bags Portland Cement, 20-bags Washed Sand, 30-bags Gravel Pea-size, 1- Pcs. 12mm Diam Rsb, 2-pcs. 2''x 5mm Angle Bar, 1-kg. #16 Tie Wire, 2-kgs Welding Rod, 1-set 2000 Ltrs. Pvc Water Tank, 1-unit 2 Hp Motor Pump, 30-l.m. 1''diam Pe Pipe Sdr 11, 4-l.m. 1/2''diam Pe Pipe Sdr 11, 1-pc. 1''diam Foot Valve, 1-pc. 1''x 1/2''diam Pe Reducer, 4-pcs. 1/2''diam Pe Tee, 4-pcs. 1/2''diam Pe Elbow, 1-set Float Switch And 2-roll Teflon Tape. Approved Budget For The Contract: ₱ 73,681.00 Contract Duration: 30 Calendar Days Delivery Period: 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund: Barangay Development Fund The Barangay Local Government Unit Of San Julian Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven (7) Calendar Days. Bidders Should Have Completed For The Last Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fall Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least 60% Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Barangay Local Government Unit Of San Julian And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 27, 2024 Until December 4, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (₱ 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person Of The Official Receipt Of Bid Documents To The Bac Office. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before December 4, 2024, 09:00am At Bac Office Barangay Compound,, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On December, 2024, 09: 00 Am At The Given Address Below Barangay Hall Of Julian, Office Of The Punong Barangay, Barangay Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Address Below. The Barangay Local Government Unit Of San Julian Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Rodolfo G. Santiago Punong Barangay Barangay Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Issued Date: November , 2024.

Details: City Of Tuscaloosa Advertisement For Bids Project Name: Garner Road Gravity Sewer Rehabilitation Project File Number: A22-1282 Engineering Project Number: 2022.005.011 Sealed Bid Proposals Will Be Received By The City Of Tuscaloosa, At The Council Chamber Of City Hall, 2201 University Boulevard, On Wednesday, December 4, 2024, Until 2:30 P.m. Local Time For This Project, At Which Time Bids Will Be Opened And Read. Pre-bid Conference: Attendance At The Mandatory Pre-bid Conference Is Required In Order For A General Contractor To Submit A Bid On This Project. The Pre-bid Conference Will Be Held At The Council Chamber Of City Hall, 2201 University Boulevard, On Wednesday, November 20, 2024, At 2:30 P.m. Local Time. Project Scope: The Scope Of Work Includes The Rehabilitation Of The Existing Sewer In The Vicinity Of Garner Road Within The City Of Tuscaloosa, Alabama. The Work Is Shown In Detail On The Contract Plans But Is Generally Described For Each Station As: (1) Mobilization And Demobilization In Accordance With Section 01 505 – Mobilization And Demobilization. (2) Remove And Replace Four Existing Air/vacuum Release Valves (arvs) On The Existing 20-inch Force Main From Lift Station 42 With 6-inch Combination Arvs. (3) Remove And Replace Four Existing Arv Manholes With Four New 5-foot Diameter Standard Flat Top Manholes And Vented Covers. (4) Rehabilitate Approximately 19,000 Lf Of 24-inch/30-inch With Cured In Place Pipe Liner. (5) Rehabilitate Approximately 68 Manholes. (6) Perform Post-rehabilitation Cctv Inspection Of Approximately 19,000 Lf Of Sewer Main. Award Of The Contract Will Be Made Within Fifty (50) Calendar Days From The Date Of The Bid Opening. Plans And Specifications: Plans And Specifications And All Related Contract Documents Are Open For Public Inspection At The Office Of Bryan Gurney, P.e., Located At 4010 Reese Phifer Ave, Tuscaloosa, Al 35401 And Plans, Specifications And Other Elements Of The Contract Documents May Be Obtained From The Office Of Gresham Smith, Designated As The Office Of The Awarding Authority For This Purpose, Located At 2222 Arlington Avenue South, Birmingham, Al 35205. The Contact Person For The Project Is Cameron Traylor, P.e. They Can Be Reached At Email Cameron.traylor@greshamsmith.com. Official Bid Documents Can Also Be Downloaded At Www.centralbidding.com. Electronic Bids Can Be Submitted At Www.centralbidding.com. For Any Questions About The Electronic Bidding Process, Please Contact Central Bidding At 225-810-4814 Or Support@centralbidding.com.

Details: Description Republika Ng Pilipinas Department Of Education Region Xi Davao City Request For Quotation Date: November 27, 2024 Pr No.: 00271 Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than In The Return Envelope Attached Herewith. Aris B. Juanillo Bac Vice Chairperson Qty Unit Item Description Abc Unit Cost Total 2 Units Floor Mounted Type Aircon ₱150,000.00 4 Hp, Floor Standing Inverter Full High Density Filter 20m Long Wind With 4-way Auto Swing Auto Shutter Hidden Display & Touch Control Anti Corrosion Treatment Cooling: 29,500kj/hw Or 36,400 Kj/hw Easy Monitoring And Inverter Pcb Self Diagnosis 5-year Warranty On Compressor 5-star Energy Efficiency Rating Control Method: Electronic Expansion Valves (eev) Net Dimensions (wxhxd) (mm) 610 X 1850 X 400 Mm With Free Labor/installation, Materials And Complete Wiring 5 Units Split Type Aircon ₱70,000.00 2.5hp, Digital Inverter Boost Fast Cooling Triple Protector Plus, Auto Clean R32 Refrigerant, Eco Mode 10-yeart Warranty On Compressor With Free Labor/installation, Materials And Complete Wiring Total ₱650,000.00 Rneap Purpose: Procurement Of Airconditioning Units To Be Used In Rneap Emerald Hall And Dormitories. Mode Of Procurement: Small Value Please Attach The Following Documents: 1) Mayor's/business Permit 2) Philgeps Registration Number 3) Omnibus Sworn Statement 4) Businnes/income Tax Return 5) Tax Clearance Note: * This Rfq Should Be Submitted Manually To Deped Regional Office Xi With Wet Ink/fresh Signature And Date By The Bidder "* Attach Complete Documents And Sealed In The Envelope With Written Pr Number Outside Of It Upon Submission On Or Before December 09, 2024" Pls Contact : Aida P. Placencia (082) 224-0749 Warranty : Price Validity : After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item/s At Prices Noted Above. _____________________________________ Printed Name And Signature Signature Over Printed Name Of The Canvasser Tel. No. / Cellphone No. E-mail Address Pr Date Deliberated: November 15, 2024 Date:_______________________ Rfq Date Prepared : November 27, 2024 Pu/jls

Details: Description Engine / Transmission Fuel Type: Diesel No. Of Cylinders : 4 Engine Size / Displacement : 2,488 Engine Type Inline 4 Cylinder Maximum Power Ps/rpm : 190/3,600 Maximum Torque Nm/rpm : 450/2,000 Engine Type: Inline 4 Cylinder, Dohc, 16 Valves, Variable Turbocharger (vgs) Intercooler Transmission Type 7-speed Manual Mode 4wd Sysyem : Part-time(2h/4h/4l) Shift-on-the Fly Electronic Locking Rear Differential : With Chassis / Tires & Wheels Suspension : Front / Rear Brakes : Front / Rear Steering Type: Power Assisted Tires: Tow Ball, Tires 265-75/60-75 R17 2inch Suspension Lift Dimensions & Weight Dimensions (lxwxh) Mm 5,260x1,875x1,855 Wheelbase Mm 3,150.00 Curb Weight Kg 2,011.00 Payload Kg 1,017.00 Bed Dimensions(lxwxh) Mm 1,470x1,495x470x520 Seating Capacity Persons 5.00 Intelligent Mobility Intelligent Around View Monitor (iavm) With Intelligent Emergency Braking (ieb) With Intelligent Forward Collision Warning (ifcw) With Intelligent Driver Alertness With Blind Spot Warning (bsw) With Rear Cross Traffic Alert (rcta) With Lane Departure Warning (ldw) With High Beam Assist (hba) With Hill Descent Control (hdc) With Functions Power Windows With (driver Side One-touch Auto Up/down) Power Door Locks With Speed Sensing And Driver Side Lock/unlocked Switch Keyless Entry System With Intelligent Key System Push Button Engine Start/stop System With Cruise Control With Air Conditioning System Dual Zone Automatic Climate Control With Rear Vents Audio Type Advanced Touchscreen Display Audio Connectivity With Navigation With Speakers 6 With 2 Tweeters Lto Registration W/ Tpl 3 Years Comprehensive C/o Gsis Insurance 1 Year Tint Med-black (upper-lower), Floor Matting, Full Tank, Free 1k Check Up With 10kms-change Oil, Front Steel Bumper Power Winch, Roll Bar, Top Light And Tow Witch With Tow Ball With Technical Support 5 Years Or 150,000 Kms, Warranty Whichever Comes First. Free Check Up /pms First 1,000km Emergency First Aid Kit With Rain Visor With Color Aspen Pearl White

Description: BOQ ITEMS: 8 mm thick square edge PVC False Ceiling Detail Specification as per Annexure A, 12 point 5 mm thick tapered edge gypsum moisture resistant board False Ceiling Detail Specification as per Annexure A, Dismantling tile work in floors ,roofs,Wall Detail Specification as per Annexure A, Demolishing brick work manually and by mechanical means Detail Specification as per Annexure A, Brick work with common burnt clay modular bricks I isto 4 Cement Coarse sand Detail Specification as per Annexure A, Plain Cement Concrete 1 isto 4 isto 8 Cement Coarse sand stone ballast Detail Specification as per Annexure A, Rein forced Cement Concrete M20 Grade Cement Coarse sand stone grit 20 mm Detail Specification as per Annexure A, Steel reinforcement for RCC Work Detail Specification as per Annexure A, Vitrified tiles in Wall floor Double Charge Detail Specification as per Annexure A, Vitrified tiles in floor mat and anti skid Detail Specification as per Annexure A, 18 mm thick gang saw cut mirror polished premoulded and prepolished granite Detail Specification as per Annexure A, aluminium work for partitions with extruded built up Detail Specification as per Annexure A, aluminium work for doors window ventilators with extruded built up Detail Specification as per Annexure A, 5 mm glass pan glazing in aluminium door window ventilator shutters and partitions Detail Specification as per Annexure A, 12 mm thick prelaminated particle board flat pressed three layer Detail Specification as per Annexure A, 12 mm thick frameless toughened glass door shutter Detail Specification as per Annexure A, 12 mm thick frameless toughened glass for Fix Partition Detail Specification as per Annexure A, partition upto ceiling height consisting of GI frame and required board Detail Specification as per Annexure A, aluminium American Handle 200 mm Long Detail Specification as per Annexure A, SS Handle 600 mm Long Set Inside and Outside for Toughned Glass Door Detail Specification as per Annexure A, stainless steel Toughned Glass Door Lock Detail Specification as per Annexure A, aluminium die cast body tubular type universal hydraulic door closer Detail Specification as per Annexure A, lock with 6 levers for aluminium Door Detail Specification as per Annexure A, aluminium tower bolts Detail Specification as per Annexure A, Cleaning of Tile by Sand paper scraper or Scraping machine using necessary Floor Cleaner Chemical Detail Specification as per Annexure A, Fiber Glass Molded Gratings over Drain with Frame Detail Specification as per Annexure A, 14 mm thick Thick WPC Panel in Reception area over alumimium Base Pipe Frame with Specialied Clip Detail Specification as per Annexure A, Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster Detail Specification as per Annexure A, 12 or 15 mm cement plaster of mix 1 isto 4 Detail Specification as per Annexure A, Removing dry or oil bound distemper water proofing cement paint Detail Specification as per Annexure A, white cement based putty of average thickness 1 mm Detail Specification as per Annexure A, acrylic distemper ready mixed having VOC content less than 50 gram per litre Detail Specification as per Annexure A, Finishing walls with Acrylic Smooth exterior paint Detail Specification as per Annexure A, Removing dry or Enamel Paint and the like by scrapping sand papering Detail Specification as per Annexure A, Painting with synthetic enamel paint Detail Specification as per Annexure A, Fly proof stainless steel grade 304 wire gauge Detail Specification as per Annexure A, GI chicken wire mesh 24 gauge and 12 mm mesh and 300 mm width Detail Specification as per Annexure A, Disposal of building rubbish malba similar unserviceable dismantled or waste materials Detail Specification as per Annexure A, Chipping of unsound or weak concrete material from slabs beams columns Detail Specification as per Annexure A, Cleaning of reinforcement from rust from the reinforcing bars Detail Specification as per Annexure A, bonding coat of approved adhesive on chipped portion of RCC Detail Specification as per Annexure A, Shotcreting RCC columns beams and slab Detail Specification as per Annexure A, Applying anticorrosive coating with brush to reinforcement Detail Specification as per Annexure A, two coats of SIKA LATEX POWER coating Detail Specification as per Annexure A, anti skid Ceramic glazed floor tiles Detail Specification as per Annexure A, ceramic glazed wall tiles Detail Specification as per Annexure A, Window Roller blinds Curtain Made of Febric material Detail Specification as per Annexure A, Glue based Frosted sheet over Glass Detail Specification as per Annexure A, Wiring for light Fan and for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, Rewiring for light point and for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, Wiring for group controlled looped light point for all with Switch 1 point 5 sqmm Detail Specification as per Annexure A, 2 by 1 point 5 sqmm fire alarm armoured cable 600 by 1000V rated with annealed copper Detail Specification as per Annexure A, 25 A modular socket outlet and 25 A modular SP MCB Detail Specification as per Annexure A, FRLS PVC insulated copper conductor single core cable Detail Specification as per Annexure A, led lights in false ceiling 36 wattts 600 by 600 Detail Specification as per Annexure A, Extension of Ceiling Fan Rod including Supply of Rod and Changing Detail Specification as per Annexure A, 400 or 450 mm sweep wall bracket fan including Hanging Bracket Detail Specification as per Annexure A, 1200 mm Ceiling Fan With Fan Regulator Detail Specification as per Annexure A, white vitreous china pedestal type water closet European type WC pan Detail Specification as per Annexure A, wash basin with 15 mm CP brass pillar taps Swan Neck Tap Detail Specification as per Annexure A, white vitreous china pedestal for wash basin Detail Specification as per Annexure A, CPVC pipes having thermal stability for hot and cold 20 mm Detail Specification as per Annexure A, CP Brass or SS Ablution health faucet assembly with 1 m long 15 mm Detail Specification as per Annexure A, CP brass angle valve for basin and points 15 mm Detail Specification as per Annexure A, CP Brass extension nipple 15 by 50 mm Detail Specification as per Annexure A, CP brass long Single Lever body bib cock 15 mm Detail Specification as per Annexure A, PVC connection pipe with brass unions 45 mm long 15 mm nominal bore Detail Specification as per Annexure A, PTMT liquid soap container 109 mm wide 125 mm high and 112 mm Detail Specification as per Annexure A, PTMT towel ring trapezoidal shape 215 mm long 200 mm Detail Specification as per Annexure A, 600 by 450 mm beveled edge mirror of superior glass Detail Specification as per Annexure A, PVC waste pipe for sink or wash basin 32 mm Detail Specification as per Annexure A, UPVC Pipe Type B class including PVC Pipe Fitting Specification as per Annexure A, Nahani Trap 110 by 75 or 110 mm Detail Specification as per Annexure A, Stainless Steel Round Jali size as N trape Detail Specification as per Annexure A, brick masonry gully chamber 50 by 45 by 60 cm internal size Detail Specification as per Annexure A

Details: Description 80 Alcohol 70 % Solution Bottle 1 Alcohol , Ethyl Gallon 4 Asepto Syringe 4 Autoclave Indicator X Roll 4 Activated Glutaraldehyde Solution 4 Alcohol 70% / Gallon 4 Arm Sling, Adult X Piece 4 Arm Sling, Pedia X Piece 2 Adhesiive Tape, Surgical Plaster 3mmx 1mmx Roll 3 Bp Aneroid 100 Blood Transfusion Set 4 Bleaching Solution X Gallon 20 Hand Soap, Fresh Melon 2 Bp Cloth Cuff, Adult 2 Bp Cloth Cuff, Pedia 2 Bp Rubber Cuff, Adult 2 Bp Rubber Cuff, Pedia 1 Bag Valve Mask, Adult 1 Bag Valve Mask, Pedia 2 Bp Rubber Vault, Adult 2 Bp Rubber Vault, Pedia 1 Cautery Pen With Cautery Tip 4 Cold Compress 2 Cord Clamp X 100 X Box 12 Chromic Atraumatic 1.0 X Piece 12 Chromic Double Arm 2.0 X Piece 12 Chromic Atraumatic 3.0 X Piece 12 Chromic Atraumatic 4.0 X Piece 12 Chromic Atraumatic 5.0 X Piece 5 Cotton 2.0 X Roll, Skin 5 Cotton 400g X Roll 1 Cutting Needles, Assorted X Dozen 20 Catheter, Straight Assorted Sizes/ Pack 30 Clean Gloves, Unsterile Ss / Box 30 Clean Gloves, Unsterile Sm / Box 1 C-collar, Adult 10 Cotton Pledget, Wooden X Box 30 Digital Thermometer 30 `disposable Surgical Head Cap X Pack 30 Disposable Surgical Mask X Pack 80 Disposable Razor X Piece 1 Disinfectant X Gallon 15 Disinfectant Spray 400g X Bottle 2 Disposable Surgical Blade # 10 X Box 2 Disposable Surgical Blade # 12 X Box 2 Disposable Surgical Blade # 15 12 Ecg Paper 50 X 30mm X 10 30 Ecg Electrode X Piece 25 Elastic Bandage 2x5 X Roll X Piece 20 Elastic Bandage 3x5 X Roll X Piece 20 Elastic Bandage 4x5 X Roll X Piece 10 Et Tube Id 2.5 X Piece 10 Et Tube Id 3.0 X Piece 10 Et Tube Id 5.5 X Piece 10 Et Tube Id 6.0 X Piece 10 Et Tube Id 6.5 X Piece 10 Et Tube Id 7.0 X Piece 40 Et Tube Id 7.5 X Piece 15 Et Tube Id 8.0 X Piece 12 Foley Catheter F 10 X Piece 10 Foley Catheter F 12 X Piece 10 Foley Catheter F 14 X Piece 50 Foley Catheter F 16 X Piece 20 Foley Catheter F 18 X Piece 15 Feather Blade X Piece 2 Formalin X Liter 10 Gauze Surgical 36 X 100 Yards X Roll 20 Gloves, Sterile 6.5 X Box 20 Gloves, Sterile 7.0 X Box 20 Gloves, Sterile 7.5 X Box 2 Glucometer With Strip 120 Heplock 10 Hot Water Bag X Piece 200 Iv Catheter G 18 X Piece 300 Iv Catheter G 20x Piece 500 Iv Catheter G 22 X Piece 500 Iv Catheter G 24 X Piece 200 Iv Catheter G 26x Piece 2 Kidney Basin, Stainless X Piece 2 Kelly Pad 18 Ky Jelly, 50g X Tube 70 Lidocaine, 2% 500 Macroset 400 Microset 100 Nebulization Kit, Adult W/ Mask 100 Nebulization Kit, Pedia W/ Mask 50 Ngt F 8x Piece 20 Ngt F 10x Piece 20 Ngt F 12x Piece 20 Ngt F 14x Piece 50 Ngt F 16x Piece 30 Ngt F 18x Piece 4 Non Rebreather Mask, Adult 4 Non Rebreather Mask, Pedia 150 Oxygen Cannula, Adult 150 Oxygen Cannula, Pedia 28 Oxygen Canula, Neonate 75 Oxygen Mask, Adult 70 Oxygen Mask, Pedia 40 Oxygen Mask, Neonate 4 Oxygen, Gauge 4 Pulse Oxymeter 50 Plaster, Micropore 1" X 12 X 12mm 4 Povidone Iodine X Gallon 1 Round Neddles , Assorted X Dozen 11 Rubber Suction 2 Rubber Sheet 30 Syringe 1 Ml X 100 X Box 40 Syringe 3 Ml X 100 X Box 40 Syringe 5 Ml X 100 X Box 30 Syringe 10 Ml X 100 X Box 1 Insulin Syringe X 100 X Box 18 Suction Set, F 25 20 Suctiom Cath F8 8 Suctiom Cath F12 10 Suctiom Cath F14 30 Suctiom Cath F16 1 Surgical Clamps, Assorted X Dozen 1 Surgical Scissors, Assorted X Dozen 12 Silk, Surgical With Needle 1.0 X Piece, Round 12 Silk, Surgical With Needle 2.0 X Piece, Round 12 Silk, Surgical With Needle 3.0 X Piece, Round 12 Silk, Surgical With Needle 4.0 X Piece, Round 12 Silk, Surgical With Needle 5.0 X Piece, Round 12 Silk, Surgical With Needle 1.0 X Piece, Cutting 24 Silk, Surgical With Needle 2.0 X Piece, Cutting 12 Silk, Surgical With Needle 3.0 X Piece, Cutting 12 Silk, Surgical With Needle 4.0 X Piece, Cutting 12 Silk, Surgical With Needle 5.0 X Piece, Cutting 4 Sphymomanometer, Table Tap 4 Stethoscope 1 Silk, Braided, Assorted X Box 12 1 Silk, Surgical, Assorted X Box X12 50 Spinal Needle, G25 20 Spinal Needle, G23 50 Soluset 1 Tympanic Thermometer X Piece 5 Triangular Bandage, Medium X Piece 5 Triangular Bandage, Large X Piece 3 Togue Depressor, Woodedn Pack 120 Urine Bag X 2l 12 Vycril 1.0 24 Vycril 2.0 12 Vycril 3.0 12 Vycril 4.0 12 Vycril 5.0 28 Wee Bag 650 Oxygen Refill 4 Expanded Nbs Kit X-ray Supplies 10 X-ray Film 14x17x100’s 10 X-ray Film 14x14x100’s 7 X-ray Film 11x14x100’s 7 X-ray Film 10x12x100’s 7 X-ray Film 8x10x100’s 8 X-ray Envelope 14x17 8 X-ray Envelope 14x14 1 X-ray Envelope 11x14 3 X-ray Envelope 10x12 7 X-ray Envelope 8x10 4 X-ray Fixer Solution Powder 12 X-ray Developer Powder 12 Tissue Double Ply X 12 Roll 15 Face Mask 3 Ply 50’s (local) 12 Garbage Bag (medium) 12 Alcohol 70%, 500ml 6 Disinfectant Spray, 400g 1 Disinfectant (gal,) 11 Latex Examination Gloves, Medium 12 Hand Soap Fresh Melon 6 Detergent Powder 1 Red Light Bulb Dental Supplies 6 Universal Bonding Agent 25 Alcohol,70%,500ml 5 Cotton Roll,400g 12 Denfill Light Curing Composite,flowable 30 Dental Anesthesia,box 1 Dental Bur, Finishing Straight Long/pack 1 Dental Bur,inverted Cone Meduim/pack 1 Dental Bur, Round(small)/pack 10 Dental Proximal Bur 18 Explorer 10 Dental Needle Gauge 30,box,short 6 Dental Needle Gauge 27,box Long 20 Disinfectant Spray, 454ml 8 Disposable Bib Towel,100pcs/pack 30 Disposable Facemask,50's/box 2500 Disposable Paper Cups,6 Oz 3 Disposable Prophy Brush,100pcs/pack 5 Disposable Saliva Ejector Tips,100pcs/pack 7 Etchant Flowable 30 Examination Gloves,medium/box 1 Highspeed Handpiece,2 Hole 10 Bib Holder 15 Mouth Mirror 5 Light Cured Cav-liner,flowable 1 Lowspeed Handpiece Contrangle 1 Polishing Inverted Cone (whitestone)/pack 1 Polishing Round Bur (whitestone)pack 2 Scaler Handpiece, Woodpecker 5 Straight Bur,tapered 1 Surgical Gauze Roll,28x24 Mesh 30 Tissue Paper,12/bale 3 Aspirating Dental Syringe 1 Flexible Dental Elevators,set(3pcs) 4 Dental Plugger 5 Dental Spoon Excavator,small 2 Low And High Speed Lubricant,330ml 10 Cleansing Wipes,80 Sheets/pack 1 Dental Surgical Scissor,curve

Details: Description 1 Bags Cement 135.0 315.65 42,612.75 2 Cum Sand 9.0 963.00 8,699.50 3 Sqm Gravel 5.0 1284.00 6,420.00 4 Pcs Concrete Hollow Block - 4" 939.0 20.33 19,089.87 5 Pcs 12 Mmø Def Bar (grade 60) 93.0 224.70 20,897.10 6 Pcs 10 Mmø Def Bar (grade 40) 100.0 224.70 22,470.00 7 Kg Gi Tie Wire # 16 18.6 85.60 1,592.16 8 Pcs Phenolic Board 7.0 1605.00 11,235.00 9 Kgs Assorted Nails 15.0 96.30 1444.50 10 Bd Ft Lumber For Formworks ( 2"x 3" And 2"x 2") 1101.5 37.45 41250.47 11 Pcs Metal Furring (jeamaxx G.24) 7.0 235.40 1,647.80 12 Pcs Carrying Channel (jeamaxx G.24) 19.0 235.40 4,472.60 13 Pcs Double U-clip (jeamaxx) 200.0 10.70 2,140.00 14 Pcs Wall Angle (jeamaxx G.24) 23.0 65.27 1,501.21 15 Pcs 1/4" Thick Cement Board (hardiflex) 18.0 513.60 9,244.80 16 Boxes Blind Rivets 1/8" Dia. X 1/2" (150 Pcs Per Box) 5.0 171.20 856.00 17 Pcs Drill Bits 10.0 10.70 107.00 18 Set Exterior Sliding Glass Windows (1.2 X 1.2 ) 2.0 5350.00 10,700.00 19 Set Exterior Sliding Glass Windows (1.6 X 1.2) 3.0 5885.00 17,655.00 20 Set Exterior Kitchen Sliding Glass Windows (2.2 X 0.6) 1.0 5350.00 5,350.00 21 Set Exterior T&b Awning Windows (0.6 X 0.6) 1.0 3210.00 3,210.00 22 Set Interior Sliding Window (1.2 X 0.5) 1.0 2675.00 2,675.00 23 Set Matwood Solid Panel Doors (2.1 X 0.9 ) 2.0 6420.00 12,840.00 24 Set Matwood Panel Type Doors (2.1 X 0.8)) 1.0 5885.00 5,885.00 25 Set Cr Door - Painted Flush Door (0.6 X 2.1) 1.0 3745.00 3,745.00 26 Pcs White Floor Tiles (60x60 ) 164.0 167.99 27,550.36 27 Pcs Cr Floor Tiles (30 X 30) 32.0 85.60 2,739.20 28 Bags Tile Adhesive 7.0 449.40 3,145.80 29 Bags White Cement 1.0 963.00 963.00 30 Gallons Flat Latex (boysen) 7.0 963.00 6,741.00 31 Gallons Semi Gloss Latex 2nd And Final Coating (boysen) 4.0 963.00 3,852.00 32 Bags Skim Coat 10.0 588.50 5,885.00 33 Roll Joint Connection Tape 3.0 440.84 1,322.52 34 Pcs # 7 Paint Roller 3.0 64.20 192.60 35 Pcs # 2 Paint Brush 5.0 21.40 107.00 36 Pcs Sand Paper 10.0 10.70 107.00 37 Gallons Flat Wall Enamel (boysen) 10.0 834.60 8,346.00 38 Gallons Quick Dry Enamel (boysen) 5.0 802.50 4,012.50 39 Gallons Laquer Thinner (boysen) 1.0 511.46 511.46 40 Gallons Paint Thinner (boysen) 1.0 511.46 511.46 41 Pcs 4''ø Upvc Pipe (neltex-orange) 4.0 770.40 3,081.60 42 Pcs 2''ø Upvc Pipe (neltex-orange) 4.0 321.00 1,284.00 43 Pcs 1/2''ø Upvc Pipe (neltex-blue) 8.0 85.60 684.80 44 Pcs 4''ø Upvc Clean Out (neltex) 2.0 107.00 214.00 45 Pcs 2''ø Upvc P-trap (neltex) 3.0 139.10 417.30 46 Pcs 4'' Ø Upvc Wye (neltex) 3.0 224.70 674.10 47 Pcs 4'' X 2 Ø Upvc Wye (neltex) 3.0 181.90 545.70 48 Pcs 2'' Ø Upvc Tee (neltex) 1.0 64.20 64.20 49 Pcs 1/2'' Ø Upvc Tee (neltex) 9.0 21.40 192.60 50 Pcs 4''ø Upvc Elbow 1/8 Bend (neltex) 3.0 96.30 288.90 51 Pcs 2''ø Upvc Elbow 1/8 Bend (neltex) 3.0 37.45 112.35 52 Pcs 2''ø Upvc Elbow 1/4 Bend (neltex) 7.0 128.40 898.80 53 Pcs 1/2''ø Upvc Elbow 1/4 Bend (neltex) 11.0 16.05 176.55 54 Pcs 1/2''ø Upvc Male Adapter (neltex) 4.0 16.05 64.20 55 Pcs Teflon Tape 10.0 11.77 117.70 56 Can Pvc Cement / 400cc 5.0 192.60 963.00 57 Pcs 4" Floor Drain S/s (pozzi Ys-d101) #div/0! 0.00 58 Pcs Stainless Sink ( Franke Ssx-110-45) 2.0 63.13 126.26 59 Pcs Goose Neck Faucet (kasch Lj-5001c Cold Tap Wall Kitchen Faucet 304 Ss) 2.0 2675.00 5,350.00 60 Pcs Faucet (kasch Lj-5003, Wall Faucet 304 Ss) 1.0 390.55 390.55 61 Pcs Check Valve 1.0 254.66 254.66 62 Pcs Gate Valve 3.0 201.16 603.48 63 Unit Water Closet(amstd Pck Winplus Ii Fl Premier Suite P2398-05 White) 2.0 321.00 642.00 64 Unit Lavatory (amstd/lav W/ped-newton White 1h W/ Bracket Set) - 1.0 4815.00 4,815.00 65 Pcs Stainless Bidet 1.0 3959.00 3,959.00 66 Set Tissue Holder And Hand Towel Rod 1.0 535.00 535.00 67 Mtrs 20mmø Liquidtight Flexible Metal Conduit With Fitting 1.0 267.50 267.50 68 Boxes 3.5 Mm² Thhn (phelps Dodge) 150.0 37.45 5,617.50 69 Boxes 2.0 Mm² Thhn (phelps Dodge) 0.5 6707.83 3,353.92 70 Pcs 2 Gang Convenience Outlet Universal 1.0 4060.65 4,060.65 71 Pcs 2 Gang Switch 6.0 342.40 2,054.40 72 Pcs 1x18w Philips Fs 13804 Glass Recessed White W/ 9w Ess Ledbulb E27 3.0 161.57 484.71 73 Set Panel Board 15.0 267.50 4,012.50 74 Pcs 125at/225af (mpb) 1.0 1455.20 1,455.20 75 Pcs 20at/50af 2.0 342.40 684.80 76 Pcs Electrical Tape 1.0 342.40 342.40 77 Pcs Utility Box 10.0 27.82 278.20 78 Pcs Junction Box 9.0 37.45 337.05 79 Lms Hi Rib Metal Roof (1220mm Width,0.5mm Thck) 4.0 42.80 171.20 80 Pcs C-purlins 6m Legnth (2" X 3") 105.0 577.80 60,669.00 81 Pcs Ga 22 Gutter 4' Length 24.0 335.98 8,063.52 82 18mm Hardiflex Senepa 17.0 374.50 6,366.50 83 Pcs 2" X 4" X 1.2mm Thck Tubular Rafter 24.0 955.51 22,932.24 84 Pcs Ga 22 Pre Painted Flashing And Gutter 4' Length 30.0 955.51 28,665.30 Grand Total 500,000.00

Details: Description Republic Of The Philippines City Of Lapu-lapu 6015 Bids And Awards Committee Invitation To Bid For The Procurement Of One (1) Unit Patient Transport Vehicle The City Of Lapu-lapu Through The Capital Outlay Funds 9998-1-07-06-010-24s1 Intends To Apply The Sum Of Two Million Pesos (₱ 2,000,000.00 ) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of One (1) Unit Patient Transport Vehicle Under P. R No. 24-10-1509. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Of Lapu-lapu Through The Bids And Awards Committee (bac) Now Invites Bids For The Abovementioned Procurement Project. Ldrrmo Item No. Qty. Unit Of Issue Item Description 1. 1 Unit Rescue Ambulance / Patient Transport Vehicle Hi-roof Engine Model: In-line 4- Cylinder, 16 Valves, Variable Turbocharger Transmission: 5-speed M/t (dash-mounted) Displacement: 2,400 Cc - 2,500 Cc Max Power: 125-129ps/3,2000rpm Fuel System: Common Rail Direct Injection Fuel Tank Capacity: 65 Liters Suspension: Front-torsion Bar With Front Stabilizer/rear-leaf Spring Steering System: Power Steering Wheelbase: 2,900 - 2950 Mm Minimum Turning Radius: 5.2m Seat Material: Fabric Safety Features: Dual Srs Airbags, With Load Sensing Valves (lvs), Seat Belt, Seat Belt Reminder (driver), High Mount Stop Lamp Warranty: 3 Years Warranty Or 100,000 Km Whichever Comes First - Vehicle Only Patient Transport Vehicle (ptv) Kit Features: -collapsible Stretcher -fire Extinguisher -spine Board -iv Hook -wall-mounted Bp Apparatus -first Aid Kit -ambubag - Pedia & Adult -stethoscope -fluorescent/ Dome Light -top Light W/ Pa System -aluminum Flooring -power Outlet & Power Inverter -oxygen Tank W/ Content -oxygen Regulator -aluminum Medicine Cabinet -divider W/ Sliding Window (separating The Driver & Rear Passenger) - Overhead Grabrail - Stainless Read Guard (for Stretcher) - Three-seated Side Passenger Seat & One-seated W/ Compartment & Seatbelt - Ambulance Stickers Inclusions: 3 Years Lto Registration, 1 Year Gsis Insurance - Compre & Ctpl, Ewd & Tint Terms & Conditions: - Delivery: Terms Required In Purchase Order/ Contract And Availability Of Lto Registration. The City Of Lapu-lapu Now Invites Bids For The Above Procurement Project. Delivery Of The Vehicle Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice Of Award/purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From The City Of Lapu-lapu Through The Bids And Awards Committee, Located At The 2/f City General Services Office, City Hall, Pusok, Lapu-lapu City And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m To 4:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 28, 2024 (from 8 A.m. To 5 P.m.) Until On Or Before 12 Noon Of December 17, 2024 From Bac Office Located At The 2/floor Of The City General Services Office, City Hall, Pusok, Lapu-lapu City And Upon Payment Of A Non-refundable Fee For The Bidding Documents, Pursuant To The Standard Rates Set On R.a.9184 In The Amount Of ₱ 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fee For The Bidding Documents During The Period Provided In The Preceding Paragraph. The City Of Lapu-lapu/ Bac Will Hold A Pre-bid Conference On December 5, 2024 (1:30 P.m.) At Bac Conference Room Located At 2/floor City General Services Office, Pusok, Lapu-lapu City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat At The Given Address Above On Or Before 12 Noon Of December 17, 2024. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 17, 2024 (1:30 P.m.) At Bac Conference Office, Located At 2/floor City General Services Office, Pusok, Lapu-lapu City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The City Of Lapu-lapu /bac Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: You May Visit The Following: Vanessa Jeanne A. Dela Serna Philgeps: ______ Website: _______ Bac Secretariat 3 Conspicuous Place: City General Service Office Ceo Bulletin: ____ Cgso:____ Market:____ Telephone Number: 340-5735 Ronaldo D. Malacora Officer-in-charge- Cgso Bac Chairperson 28th Day Of November, 2024 (philgeps’ Posting Date)