Valve Tenders

Description: Public tender VOB/A expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, T ... Further expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, depth up to 4.00 m 530 m³ 2. 3. 2. 180. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 VOB 2012), 1150 tonnes 2. 3. 2. 190. Allowance for excavation Bm-f3 recycling/disposal, 1150 tonnes. 2. 3. 2. 150. Install filling material, embedding pipes Dn 1600, 200 m³ 2. 3. 3. 60. Reinforced concrete pipes Dn 1600, 37.50 m 2. 3. 3. 100. Throttle shaft 1 piece 2. 3. 3. 110. Connection to union collector, slip shaft 1 piece 2. 3. 3. 120. Alpheus throttle device, delivery and installation 1 piece 2. 4. 1. 10. Soil excavation, trench channel, depth up to 4.00 m, 900 m³ 2. 4. 1. 30. Coarse chipping, grain size 0/45-0/63, 100 m³ 2. 4. 1. 40. Trench shoring, 1350 M² 2. 4. 1. 170. Install filling material, embedding pipes Dn 300-600, 210 M³ 2. 4. 1. 190. Backfilling canal trench Material: Stone earth 'up to 3.00 M 450 M³ 2. 4. 1. 200. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012) 1550 To. 2. 4. 1. 210. Allowance for excavation Bm-f3 recycling/disposal 1550 To. 2. 4. 2. 10. Pp - sewer pipe Dn/od 315, 90 M 2. 4. 2. 30. Pp - sewer pipe Dn/od 400, 115 M 2. 4. 2. 50. Pp - sewer pipe Dn/od 500, 50 M Shaft structures Dn 1000, 8 sewer house connections, 21 drinking water pipes 3. 3. 1. 20. Soil excavation, trench for drinking water supply, depth up to 1.75 m, 415 m³ 3. 3. 1. 120. Pipeline zone, 185 m³ 3. 3. 1. 130. Backfilling of drinking water trench, with materials to be delivered from the supplier, 150 m³ 3. 3. 1. 220. Removal, recycling Excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 700 tons 3. 3. 1. 230. Allowance for excavation Bm-f3 recycling/disposal, 700 tons. 3. 4. 1. 30. Pe 100 - pipe Dn 100, 370 M 3. 4. 1. 110. Ductile fittings, 350 Kg 3. 5. 1. 10. Pe-100 pressure pipe Da 40 / earthworks, 80 M 3. 5. 1. 20. Pe-100 pressure pipe Da 63 / earthworks, 20 M 3. 5. 1. 30. Removal, recycling of excavated soil, uncontaminated, homogeneous range B2 - B4 (bkl. 2-5 Vob 2012), 230 To. 3. 5. 1. 40. Allowance for excavation Bm-f3 recycling/disposal, 230 To. 3. 5. 1. 120. Valve drilling fitting for Da 125 Pehd, 19 pieces 3. 5. 1. 150. Water meter shaft delivery, installation 1 meter, 10 pieces 3. 5. 1. 310. Drinking fountain Twb, 1 piece flood protection 04.03.03.1 Soil excavation construction pit, depth up to 2.50 m 800 M3 04.03.03.6 Soil, excavation pit backfill, choice of, 210 M3 04.03.04.1 Removal, recycling of soil excavation, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 650 T 04.03.04.2 Allowance for excavation Bm-f3 recycling/disposal, 650 T 04.04.01.1 Shoring for excavations, T up to 2.50 m, 600 m2 04.05.01.6 Open GW-section, pump output 20 l/s, 1500 h 04.07.01.5 Sb-prefabricated part made of C 35/45, 120 m3 04.07.01.6 Sb-prefabricated part made of C 35/45 Ramp access to allotments, 15 m3 04.07.01.8 Installing B500a / B500b reinforcing steel, 35 T 04.07.01.15 Wall plate, height 80 cm, width 99 cm, 20 pieces 04.07.01.16 Wall plate, height 105 cm, width 99 cm, 16 pieces Road construction 5. 2. 4. 40. Traffic area up to 60 cm removal / disposal Bm-0*, 1380 m² 5. 2. 4. 50. Traffic area up to 65 cm removal / disposal Bm-0*, 80 m² 5. 2. 4. 60. Traffic area up to 60 cm removal / disposal Bm-0*, 420 m² 5. 2. 4. 70. Allowance for interim soil storage for sampling according to Laga, 760 m³ 5. 2. 4. 80. Allowance for soil disposal, Bm-f3* / Avv 17 01 07, 1400 tonnes 5. 2. 4. 110. Allowance for disposal of tar-containing rubble up to 400 mg/kg / Avv 17 03 01*, 300 tonnes 5. 2. 6. Road drainage Road drain, 19 pieces 5. 2. 7. 20. "Create gravel base layer, Bk1.0 to Bk100*0/32, 1450 M² 5. 2. 7. 40. Frost protection layer D 26 cm roadway, 390 M² 5. 2. 8. 150. Drainage channel three-row, trough shape, B=0.50 M, 265 M 5. 2.10. 20. Paving from concrete blocks, St.100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow joint, 1440 M² 5. 3. 3. 30. Remove traffic area up to 34 cm / Disposal Bm-0*, 405 M² 5. 3. 4. Street drainage 5. 3. 4. 30. Kg-pipes Dn 150 / Earthworks Up to 2.00 m average depth, 55 M 5. 3. 7. 20. Paving made of concrete blocks, manufacturer st. 100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow connection, 515 M²

Description: Public tender VOB/A expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, T ... Further expansion of the streets at Klippelgarten and "Klosterhofstrasse in Sulzbach (Taunus) including flood protection wall, drinking water supply and sewer channel 2. 3. 2. 30. Soil excavation, trench channel, depth up to 4.00 m 530 m³ 2. 3. 2. 180. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 VOB 2012), 1150 tonnes 2. 3. 2. 190. Allowance for excavation Bm-f3 recycling/disposal, 1150 tonnes. 2. 3. 2. 150. Install filling material, embedding pipes Dn 1600, 200 m³ 2. 3. 3. 60. Reinforced concrete pipes Dn 1600, 37.50 m 2. 3. 3. 100. Throttle shaft 1 piece 2. 3. 3. 110. Connection to union collector, slip shaft 1 piece 2. 3. 3. 120. Alpheus throttle device, delivery and installation 1 piece 2. 4. 1. 10. Soil excavation, trench channel, depth up to 4.00 m, 900 m³ 2. 4. 1. 30. Coarse chipping, grain size 0/45-0/63, 100 m³ 2. 4. 1. 40. Trench shoring, 1350 M² 2. 4. 1. 170. Install filling material, embedding pipes Dn 300-600, 210 M³ 2. 4. 1. 190. Backfilling canal trench Material: Stone earth 'up to 3.00 M 450 M³ 2. 4. 1. 200. Removal, recycling of excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012) 1550 To. 2. 4. 1. 210. Allowance for excavation Bm-f3 recycling/disposal 1550 To. 2. 4. 2. 10. Pp - sewer pipe Dn/od 315, 90 M 2. 4. 2. 30. Pp - sewer pipe Dn/od 400, 115 M 2. 4. 2. 50. Pp - sewer pipe Dn/od 500, 50 M Shaft structures Dn 1000, 8 sewer house connections, 21 drinking water pipes 3. 3. 1. 20. Soil excavation, trench for drinking water supply, depth up to 1.75 m, 415 m³ 3. 3. 1. 120. Pipeline zone, 185 m³ 3. 3. 1. 130. Backfilling of drinking water trench, with materials to be delivered from the supplier, 150 m³ 3. 3. 1. 220. Removal, recycling Excavated soil, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 700 tons 3. 3. 1. 230. Allowance for excavation Bm-f3 recycling/disposal, 700 tons. 3. 4. 1. 30. Pe 100 - pipe Dn 100, 370 M 3. 4. 1. 110. Ductile fittings, 350 Kg 3. 5. 1. 10. Pe-100 pressure pipe Da 40 / earthworks, 80 M 3. 5. 1. 20. Pe-100 pressure pipe Da 63 / earthworks, 20 M 3. 5. 1. 30. Removal, recycling of excavated soil, uncontaminated, homogeneous range B2 - B4 (bkl. 2-5 Vob 2012), 230 To. 3. 5. 1. 40. Allowance for excavation Bm-f3 recycling/disposal, 230 To. 3. 5. 1. 120. Valve drilling fitting for Da 125 Pehd, 19 pieces 3. 5. 1. 150. Water meter shaft delivery, installation 1 meter, 10 pieces 3. 5. 1. 310. Drinking fountain Twb, 1 piece flood protection 04.03.03.1 Soil excavation construction pit, depth up to 2.50 m 800 M3 04.03.03.6 Soil, excavation pit backfill, choice of, 210 M3 04.03.04.1 Removal, recycling of soil excavation, uncontaminated, homogeneous area B2 - B4 (bkl. 2-5 Vob 2012), 650 T 04.03.04.2 Allowance for excavation Bm-f3 recycling/disposal, 650 T 04.04.01.1 Shoring for excavations, T up to 2.50 m, 600 m2 04.05.01.6 Open GW-section, pump output 20 l/s, 1500 h 04.07.01.5 Sb-prefabricated part made of C 35/45, 120 m3 04.07.01.6 Sb-prefabricated part made of C 35/45 Ramp access to allotments, 15 m3 04.07.01.8 Installing B500a / B500b reinforcing steel, 35 T 04.07.01.15 Wall plate, height 80 cm, width 99 cm, 20 pieces 04.07.01.16 Wall plate, height 105 cm, width 99 cm, 16 pieces Road construction 5. 2. 4. 40. Traffic area up to 60 cm removal / disposal Bm-0*, 1380 m² 5. 2. 4. 50. Traffic area up to 65 cm removal / disposal Bm-0*, 80 m² 5. 2. 4. 60. Traffic area up to 60 cm removal / disposal Bm-0*, 420 m² 5. 2. 4. 70. Allowance for interim soil storage for sampling according to Laga, 760 m³ 5. 2. 4. 80. Allowance for soil disposal, Bm-f3* / Avv 17 01 07, 1400 tonnes 5. 2. 4. 110. Allowance for disposal of tar-containing rubble up to 400 mg/kg / Avv 17 03 01*, 300 tonnes 5. 2. 6. Road drainage Road drain, 19 pieces 5. 2. 7. 20. "Create gravel base layer, Bk1.0 to Bk100*0/32, 1450 M² 5. 2. 7. 40. Frost protection layer D 26 cm roadway, 390 M² 5. 2. 8. 150. Drainage channel three-row, trough shape, B=0.50 M, 265 M 5. 2.10. 20. Paving from concrete blocks, St.100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow joint, 1440 M² 5. 3. 3. 30. Remove traffic area up to 34 cm / Disposal Bm-0*, 405 M² 5. 3. 4. Street drainage 5. 3. 4. 30. Kg-pipes Dn 150 / Earthworks Up to 2.00 m average depth, 55 M 5. 3. 7. 20. Paving made of concrete blocks, manufacturer st. 100/200/100*mf, O.front., bedding 0/5*sz 22*joint 0/2, elbow connection, 515 M²

Details: Description Invitation To Bid For Supply And Delivery Of One (1) Lot Various Diving Gears For Monitoring And Assessment Of Nipas Marine Protected Areas In Region X 1. The Department Of Environment And Natural Resources (denr) – Region 10, Through The Fy 2024 – General Appropriations Act (ra 11975) Intends To Apply The Sum Of Two Million Four Hundred Eighty-six Thousand Seven Hundred Seventy-six Pesos And Ninety-seven Centavos Only (₽ 2,486,776.97) Being The Abc To Payments Under The Contract For Supply And Delivery Of One (1) Lot Various Diving Gears For Monitoring And Assessment Of Nipas Marine Protected Areas In Region X. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Denr-10 Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Particulars (specifications) Unit Qty Supply And Delivery Of One (1) Lot Various Diving Gears For Monitoring And Assessment Of Nipas Marine Protected Areas In Region X - (₽2,486,776.97) 50-meter Transect Line • 50mx12.5mm Long Measuring Tape • Fiberglass Blade, With Clear And Durable Scale; • High Impact Abs Case; • Strong Belt Clip Ergonomic Comfortable Grip Roll 3 100-meter Transect Line • 100mx12.5mm Long Measuring Tape • Fiberglass Blade, With Clear And Durable Scale; • High Impact Abs Case; • Strong Belt Clip Ergonomic Comfortable Grip Roll 3 Gps Unit • Physical Dimensions: 3.4" X 7.2" X 1.3" (8.76 X 18.30 X 3.27 Cm) • Touchscreen • Display Size: 2.55"w X 4.25"h (6.48 X 10.80 Cm); 5" Diag (12.70 Cm) • Display Resolution: 480 X 800 Pixels • Display Type: Wvga Transflective, Dual Orientation • Weight: 14.0 Oz (397 G) With Included Lithium-ion Battery Pack • Battery Type: Rechargeable Lithium-ion (included) Or 3 Aa Batteries (not Included); Lithium Recommended • Battery Life Gps Mode: Up To 18 Hours Expedition Mode: Up To 330 Hours • Water Rating: Ipx7 • Mil-std-810: Yes (thermal, Shock, Water, Vibe) • High-sensitivity Receiver • Interface: High Speed Micro Usb And Nmea 0183 Compatible • Memory/history: 16 Gb (user Space Varies Based On Included Mapping) Unit 3 Buoyancy Control Device (bcd) • With Padded Neck Collar • 3 Dump Valves • Chest Strap • Waist Strap Velcro Type With Rear Adjustment • Zipper On Both Pockets • 2 Female Clips On Both Left And Right Shoulder Strap For Size Adjustment • Octopus Hose And Gauge Slits On Both Side For Stream Lining Convenience • 4 Metal D-rings • Tank Band Adjuster Water Drain On Pocket Sides Unit 10 Weight Belts • Weight Belts Made Of Durable Webbing Plastic Or Stainless Steel Buckle Pc 10 Weights (2lbs) Pc 40 Regulator Set • Two 1st Stage Regulators, Ideally Incorporating A Swivel And 5th (end) Ip Port. • Two 2nd Stage Regulators • A Long Hose Of 1.5 To 2m In Length • A Short Hose Of 24-28cm In Length • An Lpi Hose (bottom Routed Lpi Bcds Need An 8-12", Depending On Chest Size) • Two Spgs (small, Flat Spgs Are Generally Best) • Two 6-9" Spg Hp Hoses • A Bungee Or Rubber Necklace• An Angle Adaptor For The Short Hose Regulator (70-90 Degrees) A Bolt Snap And Attachment For The Long Hose Regulator Set 10 Mask • Single-frame Mask • Low Volume Frame And Excellent Wide Vision • Double-edged Hypoallergenic Skirt Tempered Lenses Pc 16 Snorkel • Rounded Design Minimizes Drag Significantly • Large Diameter Bore For Easy Breathing Large Single Purge For Easy Clearing Pc 16 Fins • Flexible Center Directional Channel • Lightweight Anti-skid Pair 16 Wetsuit (full) Pc 10 Air Tank (80 Cubic) • Capacity (cu. Ft.): S80 • Diameter (in./mm.): 7.25 / 184.2 • Length (in./mm.): 25.8 / 654 • Empty Weight (lbs./kgs.): 31.6 / 14.3 • Water Capacity (cu. In./lbs./liters): 679 / 24.5 / 11.1 • Buoyancy (full/500 Psi/empty): 7.8 / -2.0 / -0.04 Unit 14 Dive Computer • Lens Material: Sapphire Crystal• Bezel Material: Fiber-reinforced Polymer • Case Material: Fiber-reinforced Polymer • Quickfit Watch Band Compatible: Yes (22 Mm) • Strap Material: Silicone • Physical Size: 45.5 X 45.5 X 15.2 Mm • Silicone Band: 128-224 Mm • Extra Long Silicone Band: 128- 373 Mm • Display Size: Custom, Two-window Design: 0.9” X 0.9” (23 X 23 Mm) • Display Resolution: 176 X 176 Pixels • Display Type: Monochrome, Sunlight-visible, Transflective Memory-in-pixel (mip) • Weight: 61 G • Battery Life: - Dive Mode: Up To 25 Hours - Smartwatch: Up To 21 Days - Battery Saver Watch Mode: Up To 48 Days - Gps: Up To 26 Hours - Max Battery Gps Mode: Up To 56 Hours - Expedition Gps Activity: Up To 27 Days • Water Rating: Dive (100 Meters) Memory/history: 32 Mb Pc 8 Booties (high Cut) • 5mm High-cut Booties Pair 10 Dive Buoy • Scd Diving Surface Marker Buoy With Valve - Orange Pc 6 Dive Flag • Scuba Diving Inflatable Float Buoy With Dive Flag • 600d Nylon, Pu Coating, Pvc • Length: Approx. 80 Cm/31.5 Inch• Tiling Width: Approx. 26 Cm/10.2 Inch • Flag Pole Height: Approx. 28 Cm/11 Inch • Package Includes: 1 Piece Scuba Diving Buoy Float With Flag Pc 6 First Aid Kit • Treat Wounds, Stings, Scrapes, Cuts And Punctures • Contains Products To Clean, Disinfect And Control Pain • Includes Razor, Gloves And Tweezer Forceps Organized Padded Soft Case Set 3 Clinometer • 52 X 77 X 15 Mm / 2.05 X 3.03 X 0.59 " • 94 G / 3.32 Oz • Acrylic Box Contains Suunto Pm-5/360 Pc Clinometer, Lanyard, Nylon Pouch, Quick Guide Pc 4 Underwater Camera With Underwater Housing • Rx100 Iii Advanced Camera With 13.2 X 8.8 Mm Sensor + Sony Mpkurx100a Underwater Housing - Black Unit 3 Action Camera • Insta360 X4 8k Video Resolution 360° Action Camera + Insta360 X4 Invisible Dive Case Unit 3 Life Vest • Opening At The Front Supporting Of Two Side Release • Compression Strap At The Front To Fit On The Body Sized • Ring Holder And Hook Holder For Accessories • Reflector At The Front And Back Hanging Strap At The Back Pc 10 Dry Bag 8l • Capacity Is 5l Instead Of The Indicated 8l • Double-stitched And Fully Taped Waterproof Seams • Light-reflecting White Interior For Better Visibility Of Gear • Bluesign Approved Recycled 70d Nylon Main Body Fabric Uses A Pfc-free Dwr Finish D-ring Attachment Point At Buckle For Securing To Boats, Bikes, Kayaks Pc 10 Dry Bag 20l • Roll • Top Closure Secured With The Patented Field Repair Buckle For A Reliable Seal Double • Stitched And Fully Taped Waterproof Seams Bluesign • Recycled 70d Nylon Fabric Uses A Pfc • Free Dwr Finish Light • Reflecting White Interior For Better Visibility Of Gear • Oval Base Prevents Rolling Away And Packs Better D • Ring Attachment Point At Buckle For Securing To Boats, Bikes & Kayaks Well Made, Compact, And Durable Pc 10 Slate/water Notebook • 120 Gsm Environmentally Friendly • 7.50cm X 12.5cm 100% Waterproof • Can Be Written On Underwater Ideally With Use Of A Pencil Suitable For Use In Moist, Humid, And Wet Environments Pc 20 Throw Bag With Rope (50ft) Set 3 Padi Open Water Diver Scuba Diving Certification Training Pax 5 Other Requirements: Duly Notarized Documents: • Certification From Manufacturer As Authorized Distributor For At Least Five (5) Years; • Certificate Of Manufacturer’s Service/support Center Stating That The Bidder Is Authorized To Repair Or Fix The Product(s); • Certificate Of Manufacturer’s After Sales Support; And • Business Permit Of Service/support Center As Proof Of Its Establishment. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From Denr Bids And Awards Committee Secretariat’s Office At The Procurement Section And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours From 8:00 Am To 5:00 Pm Mondays To Fridays Starting December 03, 2024 Up To December 23, 2024. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 03, 2024 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱5,000.00). 6. The Denr-10 Will Hold A Pre-bid Conference On December 10, 2024 At 10:30 Am At Denr-10 Conference Room, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 23, 2024 At 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 23, 2024 At 10:30 Am At Denr-10 Conference Room, Puntod, Cagayan De Oro City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Schedule Of Bac Activities Are As Follows: Activity Date Time Venue Availability Of Bidding Documents December 03, 2024 To December 23, 2024 8:00 Am To 5:00 Pm Monday To Friday (december 03, 2024 To December 20, 2024) 8:00 Am To 8:50am (december 23, 2024) Denr-10 Bac Secretariat, Puntod, Cagayan De Oro City Pre-bid Conference December 10, 2024 10:30 Am Denr-10 Conference Room Deadline For Submission Of Bid Documents December 23, 2024 9:00 Am Denr-10 Conference Room Opening Of Bids December 23, 2024 10:30 Am Denr-10 Conference Room 11. The Denr-10 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Rogelito D. Urbiztondo Chairperson, Bac Secretariat Denr-10, Puntod Cagayan De Oro City Contact. Nos. 0927-718-4359 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: R10.denr.gov.ph And At Philgeps Website [december 02, 2024] Pura T. Pallares Chairperson, Bids And Awards Committee Chief, Finance Division

Details: Description Republic Of The Philippines Carlos Hilado Memorial State University Talisay City, Negros Occidental Mobile Phone Number: (0939) 929 6624 Bac.sec@chmsu.edu.ph Request For Quotation Page 1 Of 9 Date: November 28, 2024 Quotation No.: 24-509 __________________________ __________________________ Please Quote Your Lowest Price On The Item/s Listed Below, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than ________________ In The Return Envelope Attached Herewith. Dr. Andrew Eusebio S.tan Bac Chairman Note: 1. All Entries Must Be Typewritten 2. Delivery Period Within ___15__ Calendar Days 3. Warranty Shall Be For A Period Of Six (6) Months For Supplies & Materials, One (1) Year For Equipment, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of ______ Calendar Days 5. G-eps Registration Certificate Shall Be Attached Upon Submission Of The Quotation 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered Item Item & Description Qty. Unit Unit Price Total Price No. (pls. Indicate Brand Offered) One(1) Lot Long Nose Plier 10 Inches 1 "badminton Racquet, Axforce Light Cannon Badminton Racquet - " 2 Pieces White, Material Frame: High Elastic Carbon Fiber, Middle Shaft Material: "high Elastic Carbon Fiber, Tension: 4u <= 32 Lbs, 5u <= 31 Lbs, " 6u <= 28 Lbs, 675mm Length Racquet, Max Tension: 4u.5u.6u, Balance: Head Heavy, Flexible Shaft Flexibility, Shaft Thickness(mm) 7 2 "shuttlecock, For Badminton, Feather: Duck Feather, " 23 Tube Head Material: 2 Layer Cork For Extended Durability, Quantity: 12 Pieces Per Tube,flight: A+,durability: A 3 Badminton Strings, String Bg65; The 0.70mm Specially Braided 10 Pieces Fibre Increases String Abrasion Durability. 4 Tennis String, Rpm Blast 12m, String Type: Polyester Mono 10 Pieces Filament, Length:12 M / 39 Ft 5 Official Balls For Basketball- Gg7, Spalding Nba Neverflat 9 Pieces Original Indoor/outdoor Basketball Size 7; • Specially Designed Valve With Cap Eliminates Leaks And Keeps Dirt Out • Performance Composite Leather Cover • Superior Grip And Feel • Designed For Competitive Indoor/outdoor Play • Indoor/ Outdoor Basketballs; Composite Basketball (men's Official); Color: Brown, Yellow; Size (l X W X H Cm) 25 X 25 X 25; Weight (kg) 0.4,basketball Leather ,fiba Approved 6 Official Balls For Basketball- Gg6, Spalding Nba Neverflat 9 Pieces Original Indoor/outdoor Basketball Size 6; • Specially Designed Valve With Cap Eliminates Leaks And Keeps Dirt Out • Performance Composite Leather Cover • Superior Grip And Feel • Designed For Competitive Indoor/outdoor Play • Indoor/ Outdoor Basketballs; Composite Basketball (men's Official); Color: Brown, White, Basketball Leather , Fiba Approved 7 Basketball Net, Heavy-duty, Made Of Bn288 Material, 2 Pieces Colored White, Suited For Size 7 Ball 8 Tabletop Score Flipper For Basketball, Flip Type, Triangle Base 2 Pieces Design, 6 Digits Or More, Metal Solid Frame With Plastic Numbers, At Least 38cmx20cmx22cmx16.5cm 9 Football Ball, F5v3700, White/blue/silver, 5, Ifa Approved, 4 Pieces Fifa Inspected, International Match Standard Ball 10 Futsal Ball, F9v2950, Size 4,laminated,matte Finish, 4 Pieces Pu Leather Material, Butyl Bladder,white,blue And Black, Fifa Approved, Fifa Inspected, International Match Standard Ball 11 Football Ball Bag, 10-12 Balls, Durable And Lightweight, 2 Pieces Drawstring Enclosure,100% Polyester 12 Official Standard Net For Volleyball - 4” Mesh Netting, With Cord 2 Pieces Headline Wire, 18 Ounce Vinyl Top And Sidebands, 2” Top And Bottom Bands With 3” Side Bands, 32”x1m (39”),fivb Approved, With 3 Side Ties, Color: Black 13 Official Balls For Volleyball- Colour: Light Colours Or A Combination 12 Pieces Of Colours; Circumference: 66 To 68 Cm; Weight: 260 To 280 G; Inside Pressure: 0.175 To 0.225 Kg/cm 2 (171 To 221 Mbar Or Hpa). Mik-v330w, Fivb Approved, Mva 300 14 Ball Cart- Seze 64x64 X 100 Cm , Color: Blue, Holds, 20-30 Balls, 1 Pieces Collapsible With Caster Wheels 15 Volleyball Antenna, Size 180x1 Cm , Color Blue Red, Material 1 Pair Aluminum Alloy, Weight O.45 Kg 16 Referee Flag, For Volleyball Linesman, Flag Steel Hand Signal 1 Pair Size 45cm Color Red, Cotton, Stainless Steel Weight 0.45kg 17 Volleyball Ball Bag, Bg260w Volleyball Ball Bag,color Blue, 2 Pieces 6 Pcs Ball Capacity 18 Inflatable Air Pump, High Pressure , 28.5cm X5cmx3.5cm, 2 Pieces Material: Pp Material With Built-in Steel Pipe Weight 94.2kg 19 Sepak Takraw Ball, Waterproof 2 Pieces Rubber Padding, Women's Tournament Ball, 160 Grams Officially Approved By The International Sepak Takraw Federation (istaf); Manufactured Under Iso 9001 Certified Quality System 20 Sepak Takraw Net, Packaged Included: 1 X Sepak Takraw Net 2 Pieces Material: Nylon; Size: Standard Size; Net Size: 6.5m X 0.76m (lxh) Weight: 0.6kg; Color: Black; Sepak Takraw Net In The Series Of 701 & 801. 21 Sepak Takraw Ball, Sepak Takraw Ballsize : 5.5″ (14 Cm), 2 Pieces Weight : 180 Grams; Material : Synthetic With Rubber Padding Men’s Tournament Ball. Officially Approved By The International Sepak Takraw Federation (istaf); Used In South East Asia (sea) Games 2015 Manufactured Under Iso 9001 Certified Quality System 22 Table Tennis Rubber, Color: Black; Type: Butterfly Dignics 09c 7 Pieces Rubber; Speed 8.7; Spin 9.5; Control 9.1; Tackiness: 5.6 Medium Tacky; Weight 7.0 Heavy; Sponge Hardness :8.3 Medium Hard 23 Table Tennis Rubber, Color: Black, Type: Baracuda Rubber, 7 Pieces Speed : 9.1, Spin : 9.8, Control : 7.1, Sponge Hardness : 47°, Type : Pimple-in 24 Table Tennis Blade, Type: Flared Or Concave; Wood Type: Timo 2 Pieces Boll Alc; Speed : 8.9; Control : 8.5; Weight : 90g; Layers : 7 Ply 25 Table Tennis Official Ball, 3 Star; Nsd Polly Ball; Size: 40+ 25 Boxes 26 Net, Table Tennis Clip Net Set 2 Pieces 27 Fins, Short Silicone Training Adult Snorkeling Professional Swimming 5 Pairs Equipment; Fins: Ultra Lightweight, Ultra Solid Blade: Asymmetrical, Flat With Rounded Edges, Responsive, Solid 28 Swim Paddles Hand, Swim Training Hand Paddles Adjustable 5 Pairs Swimming Training Fins For Adult; Specification: Material: Silicone Size(length X Width): S: 15.5x14.5cm/6.10x5.71inch M: 19x17.5cm/7.48x6.89inch; L: 22x20.5cm/8.66x8.07inch Package Includes: 1 Pair Swim Hand Paddles 29 Swimming Kickboard 5 Pieces 30 Swimming Goggles, Hydroscopic Lens Shape For Maximum Foveal 5 Pieces & Peripheral Vision With Minimum Head Movement; Traditional Speedsocket Goggle Seal For Reliable Fit And Performance Double Silicone Racing Strap For A Quick And Secure Fit; Anti-fog Coated Lenses With 100% Uv Protection; Chrome Mirror-coated Lenses For Reduced Brightness And Glare - Ideal For Racing & Triathlons, Fully Approved By Fina 31 Swim Wear, Regular Standard Swim Wear, Soft Removable Pads 5 Pieces Wear With Or Without, To Achieve The Right Courage And Comfort For You 100% Chlorine Resistant For Long Lasting Performance Quick Dry - Dries Faster After You Swim Workout Made Of Oeko-tex Textile; Fits Like New For Longer With Creora Highclo Shape Retention Fabric Stretches To Enjoy Swim Without Feeling Restricted Made From Recycled Waste Fabric Yarn In The Fabric Made From 100% Pre-consumer Waste Such As Waste Fabric From Factories Midnight Blue Or Black In Color; Size 26 - 1; Size 28 - 3; Size 29 - 1 32 Jammer Half Suit, Shape Retention Fabric Stretches To Enjoy Swim 5 Pieces With Feeling Restricted; Made From Recycled Waste Fabric Yarn In The Fabric Made From 100% Pre- Consumer Waste Such As Waste Fabric From Factories. Midnight Blue Or Black In Color: Size 28 - 3, Size 30 - 2 33 Swimming Pull Buoy, Swimfit, High Quality ; 5 Pieces Material: High-quality Eva Foam; Dimensions: 12.7 X 24 Cm 34 Head Cap, 30 Moulded Silicone Swim Cap, For Improved Comfort & Fit 5 Pieces 35 Stix Body Armor, High-grade Plastic Visor,synthetic Leather, 2 Pieces Branded Foam Padding, Reversible Design (blue/ Red) Provides Versatility In Usage During Sparring Matches. Size Medium 36 Stix Femail Groin Guard, High-grade Plastic Visor, Synthetic 2 Pieces Leather, Pe Foam Padding, Elastic Garter, Strong-hold Hook-and-loop Fastener,size Medium 37 Stix Arm Guard, Biceps (2 Pcs- Red, 2pcs- Blue), Hard Plastic 4 Pieces Visor, Branded Garter, Strong Hold Hook-and-loop Fastener,pe Foam Padding, Size Medium 38 Stix Arnis Guard, Forearm (2pcs- Red, 2pcs-blue), 4 Pieces Mesh Inner Lining, Branded Garter, Strong Hold Hook-and-loop Fastener, Pe Foam Padding, Size Medium 39 Stix Eskrima Body Armor (1 Pc- Red, 1pc- Blue), High-grade 2 Pieces Plastic Visor, Branded Foam Paddings ,size Medium 40 Stix Eskrima Hand Gloves (1 Pc- Red, 1pc- Blue), Hard Plastic 2 Pairs Visor, Mesh Inner Lining, Branded Garter, Strong-hold Hook-and-loop Fastener, Foam Padding,size Medium 41 Arnis Headgear Eskrima Kali Stick Fighting Adult Sparring Headgear, Fully Padded 2 Pieces With Metal Face Cage, Padded Crown And Ears. Size Medium, (1 Pc- Red, 1pc- Blue) 42 Arnis Stick, Tournament Rattan Escrima Kali Arnis Stick 28" X 7/8" 4 Pieces Blue, Red (2pcs- Red, 2pcs-blue) 43 Whistle, Fox 40 Sonik Blast Cmg Whistle With Breakaway Lanyard 5 Pieces Sports Safety Outdoors; Fox 40 Sonik Blastcmghas A Distinct, Loud And Clear Sound; 2-chamber Pealess +cmg Design.sound Rated To 120 Db; Color: Purple And Red 44 Cones, Size:12 Inch ; Color:red / Orange; Material:polyethylene Pe 30 Pieces Plastic Agility Cones 18cm Soccer Cones Traffic Cone Sport Training Agility Marker Cone For Soccer Skating Football Basketball Indoor And Outdoor Games 45 Frisbee Disc, Weighs 175 Grams And Measures 10.5" Diameter 10 Pieces 46 Resistance Band, Legs Training Resistance Band; 20 Pairs Material: 2.54 Cm Elastic Band 47 Sensor Socks (m) - Materials: Pu Outer Layer, Sponge, Elastic 2 Pairs Textile And Sensor. 48 Sensor Socks (l) - Materials: Pu Outer Layer, Sponge, Elastic 2 Pairs Textile And Sensor. 49 Groin Guard For Tae Kwon Do (women) (size 2); Material: High 4 Pcs Quality Mayan Lethaer , Eva, Size 150 Cm - 170 Cm 50 Silicon Human Dummy Kick 2 Pcs Description: The Base Has An Option To Be Filled With Water Or Sand To Really Secure It Down,very Easy To Set Up, Literally Put The Punch Man Onto Base And Screw Down Body Weight Is Approx 19kg, Base Weight Is Approx 5kg, Once Filled Can Reach A Whopping 130k Life Like Dummy To Practise Combos And Accuaracy Full Sized Dummy Which Allows You To Kick And Punch 170 Cm Tall, 65cm Wide. 51 Head Gear, For Tae Kwon Do (m)(blue) - Material: Molded Foam 2 Pcs Padding, Glossy Fisnish Coating And Garterized Starp With Strong Hook And Loop Fastener, Size Wxlxh 24x25x26. 52 Head Gear For Tae Kwon Do (m)(red) - Material: Molded Foam 4 Pcs Padding, Glossy Fisnish Coating And Garterized Starp With Strong Hook And Loop Fastener, Size Wxlxh 24x25x26. 53 Kickpad Double Paces For Tae Kwon Do - Material: Pu, Eva, 4 Pcs Size Lxwxh 38x19x5cm Weight 320g 54 Mouth Guard For Tae Kwon Do (senior) - Material: Silicon 16 Pcs Color: Transparent. 55 Arm Guard & Shin Guard For Tae Kwon Do (m) - Material: Pu , 4 Pairs Soft, Strudy And Burstproof. 56 Offical Body Armor For Tae Kwon Do (size 3) - Material: Pu 2 Pcs Jacquard Leather, Size: Wxlxh 94x45x2 Cm 57 Taekwondo Gloves (m)- Material: Pu Leather Size: 150-160 Cm 4 Pairs 58 Taekwondo Training Uniform (xl) - Material: Cotton And 2 Pcs Polyester Packing Includes 1 Pants + 1 Top + 1 Free Black Belt. 59 Taekwondo Training Uniform (l) -material:cotton And Polyester 4 Pcs Packing Includes 1 Pants + 1 Top + 1 Free Black Belt. 60 Taekwondo Training Uniform (m) - Material: Cotton And 4 Pcs Polyester Packing Includes 1 Pants + 1 Top + 1 Free Black Belt. 61 Taekwondo Training Uniform (s) - Material: Cotton And 4 Pcs Polyester Packing Includes 1 Pants + 1 Top + 1 Free Black Belt. Alijis-4 62 Mats For Taekwondo (8x8) Specs: 2.5cm With 8 Interlocks, 40 Pcs Materials: Eva Rubber Mats Foam Floor . Total ***************nothing Follows****************** Total Abc = Php 600,195.00 Procurement Of Various Sporting Goods For The Upcoming Sports Events - Talisay Campus/ J.r. Bascar Pr# 24-862-1024 10-24-24 Income 482-164-24-11 11-14-24

Details: - Renewal of drinking water pipeline D 125 (680 m) / D 90 Pe Sdr 11 (220 m) / D 63 Pe Sdr 11 (210 m), of which approx. 1,085 m trenchless installation, 25 m open pipe trench - Removal of drinking water pipelines no longer required including construction of valve crosses and hydrants

Details: Description Republic Of The Philippines Province Of Iloilo Bids And Awards Committee Request For Quotation Quotation No.ass-24-1798-np2(sv) Reference Pr No.ass-24-1798 November 27, 2024 Avescor Motors Of Bacolod, Inc. Araneta St., Singcang Airport, Bacolod City Tel Nos. (034) 433-5088 The Iloilo Provincial Government, Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Supplier/distributor To Quote Their Lowest Price On The Item/s Listed Below Subject To The Terms And Conditions Stated Herein, Stating The Shortest Time Of Delivery, And Submit The Same Duly Signed By Their Authorized Representatives Not Later Than December 9, 2024 At 9:00 A.m. At The 5th Floor, Bac Secretariat Office, Capitol Building, Iloilo City After Payment Of The Rfq Form In The Amount Of Five Hundred Pesos (₱500.00). Atty. Dennis T. Ventilacion Chairperson, Bac Approved Budget For The Contract: ₱58,530.00 Place Of Delivery: Iloilo Provincial Assessor’s Office Date Of Delivery: Within Ten (10) Calendar Days From Receipt Of Notice To Proceed X Complete Bid Partial Bid Item No. Quantity Unit Of Issue Description Estimated Unit Cost Brand Unit Cost Total Cost 1 1 Job Furnishing Of Labor And Parts, Materials And Other Incidentals Necessary For The Replacement Of Fluids Except Engine Oil Of Service Vehicle Montero Sport –glx4x2 58,530.00 A. Parts And Materials Coolant 5 Liters, Brake Fluids 2 Bottles, Gear Oil, 4 Liters, Gear Oil, 3 Liters, Cleaner 3 Cans, A/c Belt 1 Pc, Alternator Belt 1 Pc, A/c Filter 1 Pc, Air, Cleaner 1 Pc, Fuel Filter Element 1pc, Front Shock Absorber 2 Pcs, Rear Shock Absorber 2 Pcs, Throttle Cleaner B. Labor Replace All Fluids Except Engine Oil, Replace Front And Rear Shock Absorber Cleaning Egr Valve, Replace A/c And Alternator Belt Terms And Conditions 1.warranty Of The Repair And Replacement Of Parts Should Be 3 Months After Servicing. 2.winning Bidder Must Coordinate With The Provincial Assessor’s Office. 3.the Above Repair Must Be Completed Within 10 Calendar Days From The Effectivity Of The Contract. Kindly Indicate The Delivery Period And Bid Amount In Words And Figures In The Space Provided Below. Non-compliance Shall Be A Ground For Disqualification. Total Bid Amount In Figures: ₱ Statement Of Delivery Period: ________________________________________________________________ Bid Amount In Words: ______________________________________________________________________ Kindly Indicate The Rfq Number And Date Of Opening Of Bids On The Outside Of The Envelope And Submit This Quotation With The Following Requirements: 1. Mayor's/business Permit; 2. Philgeps Registration Number For The Alternative Methods Of Procurement Under Section 50, Section 52.1 (b), Section 53.3, Section 53.6, Section 53.7, Section 53.9, Section 53.10, And Section 53.11 Of The Revised Irr Of R.a. No. 9184; 3. Income/business Tax Return For The Procurement Projects With Abc Above ₱500,000.00; 4. Notarized Omnibus Sworn Statement Specifying The Rfq Number For Procurement Projects With Abc Above ₱50,000.00; 5. Dti/sec/cda Registration Certificate; 6. Notarized Authority Of The Signatory, If Representative (spa Of Proprietor For Single Proprietorship/secretary Certificate For Corporation); 7. Technical Specifications In The Prescribed Form (for Non-expendables/non-consumables) 8. Schedule Of Requirements/delivery Period In The Prescribed Form; 9. After-sales Service/parts (for Goods Requiring Maintenance Service/parts); 10. Manpower Requirements (for The Procurement Of Projects With Labor Component); 11. Financial Proposal In The Prescribed Form; 12. Active Email Address Or Working Fax Number. Absence Of Both Is A Ground For The Rating Of Its Bid As "failed" Or "disqualified." 13. For Easy Validation During The Post-qualification In The Procurement Of Drugs And Medicines, Bidders Are Encouraged To Submit The Following: A. License To Operate From The Food And Drug Administration (fda); B. Certificate Of Product Registration From The Fda; C. Certificate Of Good Manufacturing Practice From The Fda; D. Batch Release Certificate From The Fda; E. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Products /items; And F. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer) 14. For The Procurement Of Infrastructure Projects, Bidders Must Submit A Valid Philippine Contractors Accreditation Board (pcab) License And Indicate Compliance With The Manpower Requirements. Province Of Iloilo Bids And Awards Committee Request For Price Quotation No. Ass-24-1798-np2(sv) Reference Pr No. Ass-24-1798 Terms And Conditions: 1. All Entries Must Be Filled-up, Written, Or Printed Legibly. Failure To Use This Form Will Result To Disqualification Of Your Bid. 2. Delivery Period: Within Ten (10) Calendar Days After Receipt Of Notice To Proceed. 3. Bids And Bid Securities Shall Be Valid For One Hundred Twenty (120) Calendar Days From The Date Of The Opening Of Bids. 4. Bids Exceeding From The Approved Budget For The Contract (abc) Shall Be Disqualified. 5. The Participating Bidder/supplier Or An Authorized Representative Must Indicate An Email Address Or Working Fax Number. Notice To The Bidder Through Either Of These Means (email/working Fax Number) Is Considered Sufficient Notice. 6. The Supplier/awardee(s) Must Conform To The Notice Of Award Within Three (3) Calendar Days From Notice Of Such Award And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award. Otherwise, The Award Shall Be Forfeited Or Cancelled. 7. The Awardee Shall Be Responsible For The Source(s) Of His Supplies, Materials, Equipment And Shall Make Deliveries In Accordance With The Schedule, Quality And Specifications Of Award And Purchase Order. Failure Of The Awardee To Comply With The Same Shall Be Ground For The Cancellation Of The Award And Purchase Order Issued To The Awardee. 8. All Deliveries By Suppliers Shall Be Subject To Inspection And Acceptance By The Representative Of The General Services Office And End User. 9. Rejected Deliveries Shall Be Construed As Non-delivery Of The Product(s)/item(s) So Ordered And Shall Be Subject To Liquidated Damages, Subject To The Terms And Conditions Prescribed Under Paragraph 10 Hereof. 10. Supplier Shall Guarantee His Deliveries To Be Free From Defects. Any Defective Item(s)/product(s) Therefore That May Be Discovered By The End-user Within The Warranty Period After Acceptance Of The Same Shall Be Replaced By The Supplier Within Seven (7) Calendar Days Upon Receipt Of A Written Notice To That Effect. 11. Performance Security Or Warranty Security, As The Case May Be, Shall Be Required From The Winning Bidder In Accordance With The Provisions Of R.a. No. 9184 And Its Revised Implementing Rules And Regulations. 12. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 13. The Supplier Must Indicate Its Complete Business/mailing Address. Otherwise, The Lack Thereof Is A Ground For Disqualification. 14. All Offers/quotations Must Be Properly Sealed And Marked In Envelopes. Unsealed Or Unmarked Envelopes Shall Be Rejected. 15. The Printed Name And Signature Of The Bidder/supplier Or Of Its Authorized Representative Must Be Legible And Verifiable And Must Indicate His/her Position. Non-compliance Is A Ground For Disqualification. 16. Bidders Shall Prepare An Original Of The Documentary Requirements For Negotiated Procurement. In Addition, Bidders Shall Submit Separate Copies Thereof (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. Non-compliance Shall Be A Ground For Declaration Of Failure/disqualification. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail.

Details: Description Republic Of The Philippines Province Of Zamboanga Del Norte Municipality Of Kalawit -ooo- Invitation To Bid “supply And Delivery One (1) Lot Construction Materials And Supplies (for The Establishment Of Nursery)” 1. The Municipality Of Kalawit, Zamboanga Del Norte, Through The Mlgu Intends To Apply The Sum Of One Hundred Twenty Three Thousand Ninety Three Pesos And 90/100 (₱123,093.90) Being The Abc To Payments Under The Contract For Supply And Delivery One (1) Lot Construction Materials And Supplies (for The Establishment Of Nursery) At Poblacion, Kalawit, Zamboanga Del Norte, (pr No.2024-745). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. Qty. Unit Item Description 1. 36 Bags Portland Cement 2. 6.0 Cu.m. Washed Sand 3. 5.0 Cu.m. Washed Gravel 4. 144 Pcs. 4"x8"x16" Chb 5. 13 Lengths 10mmø Def. Bars 6. 1 Kgs. #16 Tiewire 7. 5 Kgs. C.w. Nails # 2½ 8. 5 Kgs. C.w. Nails # 4 9. 5 Kgs. C.w. Nails # 3 10. 4 Pcs. ¼" Thk. Ordinary Plywood 11. 19 Shts. ¼" Thk. Hardiflex 12. 8 Kgs. Hardi Nails #1 13. 2 Pairs 3"x3" Loose Pin Hinges 14. 4 Pairs 1½" X 3" Loose Pin Hinges 15. 1 Pc. Heavy Duty Door Knob 16. 4 Pcs. 2" Barrel Bolt 17. 12 Pcs. Hardi Senepa 10"x8" 18. 1 Box ⅛" X ¼" Blind Rivets 19. 1 Box ⅛" Drill Bit Metal (10 Pcs/box) 20. 24 Pcs. 0.4mm X 8' Corr. Gi Shts. 21. 2 Pcs. 0.4mm X 8' Plain Gi Shts. 22. 2 Kgs. Umbrella Nails #2½ 23. 1 Sack Ammonium Phosphate Fertilizer (16-20-0) 24. 1 Gallon Glyophosate Herbicide 25. 1 Pc. Electric Knapsack Sprayer 26. 1 Pc. Plastic Pressure Sprayer (2 Liters Cap.) 27. 1 Roll Garden Hose (5/8" X 30m, Dark Green) 28. 1 Unit Watering Can (5 Liters) 29. 1 Unit Wheel Barrow (18", Wide Type) 30. 1 Unit Weighing Scale (flat Plate, 20 Kgs) 31. 4 Pcs. Garden Transplanter (steel) 32. 2 Pcs. Garden Claw 33. 2 Pcs. Fork (steel) 34. 2 Pcs. Trowel 35. 1 Pc. Pruning Saw 36. 1 Pc. Pruner/trimmer 37. 2 Pcs. Cultivator 38. 2 Pcs. Machete (curve) 39. 2 Pcs. Bolo, Wood Handle (bunglay) 40. 1 Pc. Post Hole Digger 41. 2 Pcs. Digging Bar 42. 1 Pc. Hedge Shear 43. 2 Pcs. Shovel 44. 2 Pcs. Hoe 45. 1 Pc. Garden Hose Noozle (set Of 4 Pcs.) 46. 1 Pc. Measuring Tape, Yellow, 50 Meters 47. 1 Pc. Crow Bar 48. 60 Packs 4" X 6" Plastic Seedling Bag (100 Pcs/pack) 49. 50 Packs 6" X 8" Polybag/seedbag (100 Pcs./pack) 50. 1 Unit Water Pump Couple, 6.5 Hp, 4 Stroke Gasoline Engine, 2"x2" 51. 1 Pc. 2" X 1" G.i. Bell Reducer 52. 1 Pc. 2" X 3/4" G.i. Bell Reducer 53. 1 Pc. 1" Pvc Male Adaptor 54. 2 Pcs. 1" Pvc Coupling 55. 1 Pc. 1" Pvc Elbow 56. 1 Pc. 1" Pvc Union 57. 1 Pc. 1" Pvc Foot Valve 58. 4 Pcs. 1" Pvc Pipe, 3 Meters 59. 1 Pc. Upvc Solvent Cement, 50ml 60. 1 Pc. Teflon Tape 61. 1 Roll 3/4" P.e. Pipe @ 90 Meters Per Roll (ordinary) 62. 1 Pc. 3/4" P.e. Male Adaptor 2. The Municipality Of Kalawit, Zamboanga Del Norte Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Twenty (20) Calendar Days. Bidders Should Have Completed, Within December 5, 2022 To December 4, 2024 From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Municipality Of Kalawit – Bids And Awards Committee (bac) Secretariat Through The Contact Details Given Below And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 From The Given Address And Website Below And Upon Payment Of A Fee In The Amount Of Five Hundred Pesos (₱500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Which Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 6. The Municipality Of Kalawit, Zamboanga Del Norte Will Hold A Pre-bid Conference On November 25, 2024, 1:00 P.m. At Bac Office, Kalawit, Zamboanga Del Norte Which Shall Be Open To Prospective Bidders. Bidders’ Representatives Who Choose To Attend The Activity And Has To Present The Following:  Letter Of Intent  Original Copy Of Special Power Of Attorney (spa)  Certified True Copy Of Valid Id Of The Owner  Certified True Copy Of The Philgeps Registration 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 5, 2024, 12:00 Nn. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 5, 2024, 1:00 P.m At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity And Has Original Special Power Of Attorney And Certified True Copy Of Valid Id’s Of The Owner With Certified True Copy. 10. The Municipality Of Kalawit, Zamboanga Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Sergio Runem M. Brillantes Bac Chairman Kalawit, Zamboanga Del Norte Cellphone No.:09778036395 November 15, 2024 Sgd. Sergio Runem M. Brillantes Bac Chairperson

Details: Description Republic Of The Philippines Province Of Iloilo Bids And Awards Committee Request For Quotation Quotation No. Pen-24-1885-np(sv) Reference Pr No. Pen-24-1885 November 28, 2024 (supplier's Name And Office Address) The Iloilo Provincial Government, Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Supplier/distributor To Quote Their Lowest Price On The Item/s Listed Below Subject To The Terms And Conditions Stated Herein, Stating The Shortest Time Of Delivery, And Submit The Same Duly Signed By Their Authorized Representatives Not Later Than December 6, 2024 At 9:00 A.m.at The Bids And Awards Committee Secretariat Office 5th Floor, Iloilo Provincial Capitol After Payment Of The Rfq Form In The Amount Of Five Hundred Pesos (₱500.00). Atty. Dennis T. Ventilacion Chairperson, Bac Approved Budget For The Contract: ₱78,973.04 Place Of Delivery: Service Center Within Iloilo City Date Of Delivery: Within Fourteen (14) Calendar Days Upon Receipt Of Notice To Proceed X Complete Bid Partial Bid Item No. Quantity Unit Of Issue Description Estimated Unit Cost Brand Unit Cost Total Cost 1 1 Job Preventive Maintenance Service Of Office Vehicle Mitsubishi (strada Plate No. 060106 72,800.00 General Job Press Abs Sensor Front Lh & Rear Rh Replace Front Wheel Axle & Hub Bearing Lh Replace Rear Brake Shoe Cleaning Egr Valve & Intake Manifold Miscellaneous Engine Detailing Materials: 3 Pcs Sensor, Fr, Abs, Lh 1 Pc Shoe Set, Pr Brake 1 Pc Joint & Shaft K, Fr Axle, Lh 1 Pc Hub Assy, Fr Wheel 1 Pc Shock Absorber, Fr Susp. Kindly Indicate The Delivery Period And Bid Amount In Words And Figures In The Space Provided Below. Non-compliance Shall Be A Ground For Disqualification. Total Bid Amount In Figures: ₱_________________ Statement Of Delivery Period: ________________________________________________________________ Bid Amount In Words: ______________________________________________________________________ Kindly Indicate The Rfq Number And Date Of Opening Of Bids On The Outside Of The Envelope And Submit This Quotation With The Following Requirements: 1. Mayor's/business Permit; 2. Philgeps Registration Number For The Alternative Methods Of Procurement Under Section 50, Section 52.1 (b), Section 53.3, Section 53.6, Section 53.7, Section 53.9, Section 53.10, And Section 53.11 Of The Revised Irr Of R.a. No. 9184; 3. Income/business Tax Return For The Procurementprojects With Abc Above ₱500,000.00; 4. Notarized Omnibus Sworn Statement Specifying The Rfq Number For Procurement Projects With Abc Above ₱50,000.00; 5. Dti/sec/cda Registration Certificate; 6. Notarized Authority Of The Signatory, If Representative (spa Of Proprietor For Single Proprietorship/secretary Certificate For Corporation); 7. Technical Specifications In The Prescribed Form (for Non-expendables/non-consumables) 8. Schedule Of Requirements/delivery Period In The Prescribed Form; 9. After-sales Service/parts (for Goods Requiring Maintenance Service/parts); 10. Manpower Requirements (for The Procurement Of Projects Withlabor Component); 11. Financial Proposal In The Prescribed Form; 12. Active Email Address Or Working Fax Number. Absence Of Both Is A Ground For The Rating Of Its Bid As "failed" Or "disqualified." 13. For Easy Validation During The Post-qualification In The Procurement Of Drugs And Medicines, Bidders Are Encouraged To Submit The Following: A. License To Operate From The Food And Drug Administration (fda); B. Certificate Of Product Registration From The Fda; C. Certificate Of Good Manufacturing Practice From The Fda; D. Batch Release Certificate From The Fda; E. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Products /items; And F. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer) 14. For The Procurement Of Infrastructure Projects, Bidders Must Submit A Valid Philippine Contractors Accreditation Board (pcab) License And Indicate Compliance With The Manpower Requirements. Province Of Iloilo Bids And Awards Committee Request For Price Quotation No. Pen-24-1885-np (sv) Reference Pr No. Pen-24-1885 Terms And Conditions: 1. All Entries Must Be Filled-up, Written, Or Printed Legibly. Failure To Use This Form Will Result To Disqualification Of Your Bid. 2. Delivery Period: Within Fourteen(14) Calendar Days Upon Receipt Of Notice To Proceed. 3. Bids And Bid Securities Shall Be Valid For One Hundred Twenty (120) Calendar Daysfrom The Date Of The Opening Of Bids. 4. Bids Exceeding From The Approved Budget For The Contract (abc) Shall Be Disqualified. 5. The Participating Bidder/supplier Or An Authorized Representative Must Indicate An Email Address Or Working Fax Number. Notice To The Bidder Through Either Of These Means (email/working Fax Number) Is Considered Sufficient Notice. 6. The Supplier/awardee(s) Must Conform To The Notice Of Award Within Three (3) Calendar Days From Notice Of Such Award And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award. Otherwise, The Award Shall Be Forfeited Or Cancelled. 7. The Awardee Shall Be Responsible For The Source(s) Of His Supplies, Materials, Equipment And Shall Make Deliveries In Accordance With The Schedule, Quality And Specifications Of Award And Purchase Order. Failure Of The Awardee To Comply With The Same Shall Be Ground For The Cancellation Of The Award And Purchase Order Issued To The Awardee. 8. All Deliveries By Suppliers Shall Be Subject To Inspection And Acceptance By The Representative Of The General Services Office And End User. 9. Rejected Deliveries Shall Be Construed As Non-delivery Of The Product(s)/item(s) So Ordered And Shall Be Subject To Liquidated Damages, Subject To The Terms And Conditions Prescribed Under Paragraph 10 Hereof. 10. Supplier Shall Guarantee His Deliveries To Be Free From Defects. Any Defective Item(s)/product(s) Therefore That May Be Discovered By The End-user Within The Warranty Period After Acceptance Of The Same Shall Be Replaced By The Supplier Within Seven (7) Calendar Days Upon Receipt Of A Written Notice To That Effect. 11. Performance Security Or Warranty Security, As The Case May Be, Shall Be Required From The Winning Bidder In Accordance With The Provisions Of R.a. No. 9184 And Its Revised Implementing Rules And Regulations. 12. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 13. The Supplier Must Indicate Its Complete Business/mailing Address. Otherwise, The Lack Thereof Is A Ground For Disqualification. 14. All Offers/quotations Must Be Properly Sealed And Marked In Envelopes. Unsealed Or Unmarked Envelopes Shall Be Rejected. 15. The Printed Name And Signature Of The Bidder/supplier Or Of Its Authorized Representative Must Be Legible And Verifiable And Must Indicate His/her Position. Non-compliance Is A Ground For Disqualification. 16. Bidders Shall Prepare An Original Of The Documentary Requirements For Negotiated Procurement. In Addition, Bidders Shall Submit Separate Copies Thereof (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. Non-compliance Shall Be A Ground For Declaration Of Failure/disqualification. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. I Hereby Certify That I Have Issued This Request For Quotation (rfq) To A Bonafide Supplier. _______________________________ Signature Over Printed Name Of End User/bac Secretariat Focal Person ______________________________ Signature Over Printed Name ______________________________ Position ______________________________ Firm/company Name ______________________________ Office Address And Contact Number

Details: Description Republic Of The Philippines Province Of Aklan Municipality Of Kalibo Invitation To Bid For Purchase Of One Unit Brand New Bulldozer, One Unit Brand New Backhoe And One Unit Brand New 10 Wheeler Truck Use At The Municipality Of Kalibo, Aklan The Municipality Of Kalibo, Through The General Fund/loan Intends To Apply The Sum Of Twenty Million Pesos (php20,000,000.00) Being The Abc To Payments Under The Contract For Purchase Of One Unit Brand New Bulldozer, One Unit Brand New Backhoe And One Unit Brand New 10 Wheeler Truck Use At The Municipality Of Kalibo, Aklan With Identification Number 11-012-1715-24. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item Description Unit Quantity 1 Brand New 10- Wheeler Mini Dump Truck Unit 1 Specification: Engine Type- 6 Cylinder- 4 Stroke- Water Cooled, Turbo- Charge Inter- Cooling, Common Rail Electrical Controlled Injection Diesel Engine Engine Power : 310 Hp @ 1900 Rpm Torque Power: 1,304 N.m/ 1200-1700 Rpm Gross Vehicle Weight 30,000 Kgs Transmission: Fast Tech Manual Drive Type: 6x4 Clutch: Diaphragm Type Steering: Power Steering With Assist Brake: Dual Circuit Compressed Air Brake Parking Brake: Air Discharging With Spring Control Auxiliary Brake Type: Engine Exhaust Brake Axles: Front Axle: Man Tech. 5, 800kg Rear Axle: Man Tech 8, 000kg, Single Reducer, Ration: 6.83 Dumpbox Capacity: 14 Cubic Tires: 12,00 R20-16pr (10+1) Fuel Tank Capacity: 400 L Aluminum 2 Brand New Backhoe (crawler Excavator) Unit 1 Specification: Engine Type 4- Cylinder, In- Line Water- Cooled, Turbo- Charged Intercooling Common Rail Electrical Controlled Injection Diesel Engine, Engine Power: 60 Hp @ 2100 Rpm Operating Weight: 7, 800 Kgs. Bucket Capacity: 0.26 C.u.m Gradeability: 35 Degrees Max Digging Depth: 4022 Arm Digging Force: 38 Kn Bucket Digging Force 68 Kn Digging Radius 6390 Mm Dimensions: 6215 X 2260 X 2705mm 3 Brand New Bulldozer Unit 1 Specification: Engine Type: Six (6) Cylinders, Four (4) Stroke, In-line, Water- Cooled, Turbocharge, Overhead Valve Direct Injection Diesel Engine Engine Power: 160 Hp @ 1850 Rpm Displacement : 9,726 L Operating Weight 16, 900 Kgs. Transmission: Transmission Speed: 3 Forward, 3 Reverse Travel Speed (km/h) Forward: 1st = 3.8, 2nd = 6.6, 3rd = 10.6 Reverse: 1st = 4.9, 2nd = 8.5, 3rd = 13.6 Torque Converter: 3-element, 1 Stage, 1 Phase, Transmission Planetary Gear, Hydraulic Shift, Forced Lubrication Main Drive Spiral Bevel Gear, Splash Lubrication, Single Stage Speed Reduction Steering Clutch: Wet, Multi-disc, Spring Loaded, Hydraulically Separated, Hydraulic Control Steering Brake: Wet, Brand Type Pedal Hydraulic Booster With Parking Brake Final Drive 2- Stage Speed Reduction Of Spur Gear Splash Lubrication Undercarriage Ground Pressure: 0.066mpa Track Guage: 1880 Mm Min. Turning Radius: 3.1 M Carrier Rollers: 2 (each Side) Track Rollers (6 / Each Side (single Flange 4, Double Flange 2) Width Of Track Shoes: 510 Mm Pitch: 203 Mm Blades Blade Capacity: 4.5 Cu.m. Blade Width: 3416 Mm Blade Height: 1149 Mm Ripper Type: Max. Digging Depth Of 3-shrank Ripper: 570mm Max. Lift: 702 Mm Hydraulic: Max. Pressure: 13.7 Mpa Pump Type: Gear Pump Discharge 250 (1850 Rpm) Terms And Condition 1. Bidder Must Have Mechatronics Certified Service Technician 2. Bidders/company Must Be Iso-9001:2015 Certified 3. Free Delivery To End User 4. All Equipment/trucks Must Be Marked With Official Logo And For Official Used Only Of Both Side 5. Warranty Three (1) Year Of 2,000 Hours Whichever Comes First Heavy Equipment) 6. Warranty Three (1) Year Or 80,000 Kms Whichever Comes First (truck) 7. All Units Must Have Standard Tools 8. 1-year Free Of Service Check-up Of Units, Prompt Sales Service And Spare Parts Supports During Pms Application, Troubleshooting And Repair Works. The Municipality Of Kalibo Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Ninety (90) Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Municipality Of Kalibo And Inspect The Bidding Documents At The Address Given Below During 8:00 -12:00 A.m. And 1:00 – 5:00 P.m., Except Saturdays, Sundays & Holidays. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 28 – December 18, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The Municipality Of Kalibo Will Hold A Pre-bid Conference On December 6, 2024; 9:00 A.m. At 2nd Floor Municipal Conference Hall, Old Building, Kalibo, Aklan. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 8:30 A.m. Of December 18, 2024. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On December 18, 2024; 9:00 A.m. At 2nd Floor, Municipal Conference Hall, Old Building, Kalibo, Aklan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Municipality Of Kalibo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Leah E. Yarre Bac – Secretariat Telephone Number (036) 268-4436 You May Visit The Website: For Downloading Of Bidding Documents: Www.kaliboaklan.gov.ph Sgd: Leenard M. Cristobal Bac, Vice-chairperson

Details: Description 1. The Local Government Unit Of Bislig City, Through The Lgsf-sbdp Cy 2023, Intends To Apply The Sum Of One Million Three Million Six Hundred Six Thousand Eight Hundred Eighty Two Pesos And 17/100 (p 3,606,882.17) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Level Ii Potable Water System At San Lorenzo, Brgy. San Roque, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. 2.1 Brief Description Of Work: I. Construction Of Elevated Water Tank Includes Reinforced Concrete Footing And Pedestal, Fabrication And Installation Of Painted Steel Framing Support And Installation Of 4,222 L Stainless Steel Tank. Ii. Solar Panel Mounting Includes The Construction Of Reinforced Concrete Footing And Pedestal, Painted Structural Steel Supports. Mechanical System Includes The Installation Of Solar Pumps & Accessories, Water Pumping System With Valves And Fittings. Electrical System Includes The Installation Of Panel Board, Electrical Wirings And Devices. Iii. Waterline Distribution Includes The Embedment Of Polyethylene Water Pipelines From Water Source, Water Tanks And To Tap Stand. Iv. Construction Of Concrete Water Tank Includes The Reinforced Concrete Tank Wall And Top And Bottom Flooring, Painting And Waterproofing. V. Construction Of Cyclone Wire Fence Includes The Reinforced Concrete Footing And Pedestal, Painted G.i. Pipe Post And Framing, Barbed Wire And Installation Of Cyclone Wire Sheets. Vi. Construction Of Concrete Tap Stand Includes The Reinforced Concrete Pad And Pedestal, Installation Of Water Pipe Fittings And Faucets. 2.2 Contract Duration: Fifty Five (55) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 18, 2024 Until The Deadline For The Submission Of Bids, From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 26, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before December 10, 2024, 1:30 P.m... Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 10, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.