Valve Tenders

Details: Description Republic Of The Philippines Bids And Awards Committee City Of Dapitan February 13, 2025 Invitation To Bid The City Government Of Dapitan, Through Its Bids And Awards Committee (bac), Invites Interested Parties To Apply For Eligibility And If Found Eligible To Bid For The Following Contract: Contract Id: Pr# 2025-02-10-044, 2025-02-10-045, 2025-02-10-046, 2025-02-10-047, 2025-02-10-049 & 2025-02-10-050 Contract Name: Procurement Of Hardware & Electrical Supplies Purpose: Use For Different Barangays Of This City Approved Budget For The Contract (abc): Php 12,796,342.00 (inclusive Of All Applicable Taxes) Source Of Fund: Poc • Prospective Bidders Should Have Expertise In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. • Bidders / Contractor’s Shall Submit Their One (1) Copy Sealed Envelope Containing Their Technical And Financial Documents. • Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. • The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualification Of The Lowest/single Calculated Bid Shall Be Conducted. • All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting February 14 – 21, 2025 Availability And Issuance Of Bidding Documents February 14 – March 10, 2025; 1:30 P.m. Pre-bid Conference February 24, 2025; 2:00 P.m Deadline For The Submission Of Bids March 10, 2025; 1:30 P.m Bid Evaluation March 10, 2025; 2:00 P.m. • Philippine Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The City Of Dapitan. (bacdapitan@gmail.com) • Payment For The Philippine Bidding Documents Is A Non – Refundable Amount Of Twenty Five Thousand Pesos Only (php 25,000.00) Payable To The Office Of The City Treasurer, Dapitan City. The City Government Of Dapitan Assumes No Responsibility Whatsoever Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The City Government Of Dapitan Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Rejects All Bids At Any Time Prior To Award Of Contract, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Sgd.engr. Renmar Terenz E. Draper Cgdh I, Management Information Systems Office Bac Chairman Annex A: Pr#2025-02-10-044 Cmo P2,143,300.00 1. 200 Pcs 2” X 20” Gi Pipe (s-40) 2. 200 Pcs 10mmx6mm Rebars 3. 50 Cu. Sand 4. 50 Cu. Gravel 5. 250 Pcs. 2”x2”x10” Coco (38bd Ft) 6. 20 Kls. Cwn #2 7. 20 Kls. Cwn #3 8. 200 Pcs Amakan 9. 100 Pcs Superlum Sin 10ft. Corrugated Gi Sheet 10. 15 Pcs Service Drop Wire #6 11. 20 Roll Hose #1/2 12. 20 Roll Hose #2 13. 100 Pcs Ordinary #8 Corrugated Gi Sheet 14. 10 Roll Pdx Wire #14 15. 10 Roll Pdx Wire #12 16. 500 Pcs Cfl Bulb (15wts) 17. 500 Pcs Electrical Tape Big Size 18. 300 Pcs Safety Breaker 30a Pr# 2025-02-10-045 Cmo P2,655,000.00 1. 1,000 Pcs Corrugated Sheet 10” 2. 1,000 Pcs Plywood ¼ Ordinary 3. 50 Rolls Service Drop Wire #06 4. 10 Bxs Pdx Wire #10 5. 10 Bxs Pdx Wire #12 6. 10 Bxs Pdx Wire #14 Pr# 2025-02-10-046 Cmo P2,615,000.00 1. 1,000 Pcs Corrugated Sheet 8” 2. 1,000 Pcs Plywood ¼ Ordinary 3. 50 Rolls Service Drop Wire #6 4. 10 Bxs Pdx Wire #10 5. 10 Bxs Pdx Wire #12 6. 10 Bxs Pdx Wire #14 Pr# 2025-02-10-047 Cmo P161,542.00 1. 1 Unit Gasoline Engine Water Pump- Four Stroke Power 4” 2. 1 Unit Gasoline Water Pump- Four Stroke Power 3” 3. 50 Mtr Bns Duct Hose 3 4. 50 Mtr Bns Duct Hose 4 5. 50 Mtr Spiral Suction Hose 4 6. 50 Mtr Spiral Suction Hose 3 7. 1 Pc Duct Hose Connector 4 8. 1 Pc Duct Hose Connector 3 9. 1 Pc Pe Foot Valve #3 10. 1 Pc Pe Foot Valve #4 11. 6 Pcs Hose Clip Ss Tw 4 12. 6 Pcs Hose Clip Ss 4 ½ Pr# 2025-02-10-049 Cmo P1,864,000.00 1. 500 Bags Cement 2. 1,000 Pcs Hollow Blocks 3. 30 Rolls Service Drop Wire #6 4. 10 Bxs Pdx Wire #10 5. 10 Bxs Pdx Wire #12 6. 10 Bxs Pdx Wire #14 7. 1000 Pcs Steel Rod 10mm 8. 1000 Pcs Steel Rod 9mm 9. 10 Pcs Floodlight – 100 Watts 10. 20 Cu. G2 Gravel 11. 1,000 Pcs 3 Gang Convenience Outlet 12. 100 Bxs Staple Wire (for Electrical) # 3/4 Pr# 2025-02-10-050 Cmo P3,357,500.00 1. 1,000 Pcs Ordinary- #8 Corrugated Gi Sheet 2. 1,000 Pcs Plywood – ¼ Ordinary 3. 50 Rolls Service Drop Wire #4 4. 10 Bxs Pdx Wire #10 5. 10 Bxs Pdx Wire #12 6. 10 Bxs Pdx Wire #14 7. 20 Rolls Hose #1/2 8. 20 Rolls Hose #2 9. 10 Rolls Pdx Wire#14 10. 10 Rolls Pdx Wire#12 11. 15 Rolls Service Drop Wire #6 12. 250 Pcs Safety Breaker 30a 13. 300 Pcs. Cfl Bulb (15 Watts)

Description: Contact Information|4|n741.6|gdh|n/a|tyreese.c.smith.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| wide Area Workflow Payment Instructions (jan 2023)|16|combo Invoice And Receiving Report||tbd|n00104|tbd|tbd|w25g1u|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (jan 2025)|13|332919|750 Emp|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| all Freight Is Fob Origin. Any Resulting Contract Will Be In Accordance To The Terms And Conditions Of Thebasic Ordering Agreement #n0010424gz901 the Resultant Award Of This Repair Solicitation Will Be Issued Bilaterally, Requiring The Contractors Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. government Source Inspection (gsi) Is Required. your Quote Should Include The Following Information: Quote Amount And Rtat unit Price:__________ total Price:__________ repair Turnaround Time (rtat): _______ Days repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor?s Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. return Material Authorization # (rma), If Applicable:__________ Awardee Info & Performance Location awardee Cage: __________ inspection & Acceptance Cage, If Not Same As ""awardee Cage"": __________ facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As ""awardee Cage"":__________ \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Valve,linear,direct . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Valve,linear,direct Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;78062 20196-006; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Description: P.l No.98050047. Scrap C & W Fittings Consisting Of Bolster Hanger, Anchor Link, Buffer Flange, Equalising Stay, Brake Head, Striker Block, Face Plate, Spare Parts Of Brake Cylinder, Knuckle, Cbc, Cbc Coupler, Axle Box, Laminated Pole Shoe, Housing, Rear Cover, Suspension Tube, Brake Beam, Dash Pot, Buffer, Oil Thrower, Top Casting, Brake Cylinder (ferrous) ,bottom Casting, Lower Spring Beam, Ox Cut Ferrous Ball Bearing, Misc. Spares Parts Of Valve & Cock, Draft Pad, Screw Coupling, Yoke , Hand Bar, Pull Road, Cam Shaft, Axle Cap, Ferrous Bearing Of Sorts And Sizes, Ferrous Part Of Different Type Of Valve, Collar, Ring, Racer, Socket Head, Jumper Head, Felt Ring, Ms Cylinder, Buffer Casing, Draw Bar Hook, Hanger Block, Chain Bolt, Chute Plate, Wear Plate, Flap Plate, Draft Gear, Gear, Pinion, Impeller, Schaku Coupler Parts, Traction Motor Parts, Nut Bolts, Pin, Icf Bogie Component And Misc. Ferrous Etc. As Available In Lot. Qty-136mt. Location-east Of Vm Road In Ncb-09. Nb: Delivery To Be Made In Actual Weighment Basis Through Lorry.

Description: P.l No.98050047. Scrap C & W Fittings Consisting Of Bolster Hanger ,anchor Link, Buffer Flange, Equalising Stay, Brake Head, Striker Block, Face Plate, Spare Parts Of Brake Cylinder, 60 Mm Suspension Belt Assemble, Traction Motor Frame, Knuckle, Cbc, Cbc Coupler, Axle Box , Laminated Pole Shoe, Housing, Rear Cover, Suspension Tube, Brake Beam, Dash Pot, Buffer ,oil Thrower, Top Casting, Brake Cylinder(ferrous), Bottom Casting, Lower Spring Beam, Ox Cut Ferrous Ball Bearing, Misc. Spares Parts Of Valve & Cock, Draft Pad, Screw Coupling, Yoke , Hand Bar, Pull Road, Cam Shaft, Axle Cap, Ferrous Bearing Of Sorts And Sizes, Ferrous Part Of Different Type Of Valve, Collar, Ring, Racer, Socket Head, Jumper Head, Felt Ring, Ms Cylinder, Buffer Casing, Draw Bar Hook, Hanger Block, Chain Bolt, Chute Plate, Wear Plate, Flap Plate, Draft Gear, Gear, Pinion, Impeller, Schaku Coupler Parts, Traction Motor Parts, Nut Bolts, Pin, Icf Bogie Component And Misc. Ferrous Etc. As Available In Lot. Qty-134mt. Location-east Of Vm Road In Ncb-10. Nb: Delivery To Be Made In Actual Weighment Basis Through Lorry.

Description: Cond. Ferrous Heavy Mix Melting Component Such As Comp. Housing With Crank Shaft, Brake Hanger, Pull Rod, Brake Cylinder, Cam Shaft Gear, Extension Shaft Gear, Liner Sleeve, Main Bearing Shell , Con Rod Bearing Shell , Out Board Housing, Fuel Jumper, Free End Spacer, Crank Case Cover, Baby Coupling, Knuckle, Knuckle Pin, Knuckle Lock, Yoke, Tapet Cover Iron, Knuckle Thrower, Coupler Body, Draft Gear Bottle Type, Draft Gear Yoke Complete Assembly, Fuel Lifter, Rocker Arm Alco, Lever Shaft Alco, Yoke Assembly, Rocker Arm Chair, Valve Bridge Stamp, Button Bridge Valve Bridge, Rocker Arm Hhp, Roller Assembly, Lever Shaft(rocker Arm), Spline Shaft, Governer Base, Counter , Liner Sleeve, Expansion Joint Assembly, Joint Assly Adopter, Water Inlet Tube, Auxiliary Shaft, Elbow Assly. Pipe, Auxiliary Shaft, Elbow Piston Cooling Pipe, Coupling Assly, Dura Cam Shaft(lb & Rb), R1 Fe Cam Shaft, R2 Fe Cam Shaft, R3 Fe Cam Shaft, R4 Fe Cam Shaft, L1 Fe Cam Shaft,l2 Fe Cam Shaft,l3 Fe Cam Shaft, L4 Fe Cam Shaft, Wds6 No. 1 Cam Shaft, Wds6 No. 2 Cam Shaft, Wds6 No. 3 Cam Shaft, Steafer Unit Cam Shaft(lhs & Rhs), R1 Bearing Spacer, L1 Bearing Spacer, R9 Bearing Spacer, L9 Bearing Spacer, R2 L2,r6 L6, R4 L4,r8 L8,r3 L3,r7 L7 Bearing Spacer, Snubber, Stub Shaft Flange (long), Stub Shaft Flange (short), Holder, Sandwich, , Auxiliary Shaft, Con-rod Bearing Shell(lower), Con-rod Bearing Shell (upper), Joint Assembly Adopter, Cam Bush Upper And Lower, Coupling Assembly, Water Inlet Tube, Main Bearing Center, Extension Shaft Gear, Fire Ring, Hand Brake, Fuel Lifter, Push Rod, Rocker Arm, Lever Shaft (alco), Rocker Arm Chair, Armed Coupling, Fulcrum Pin, Yoke Assembly, Fuel Roller, Roller A/e, Roller Assly. (hhp), Spring Valve Bridge, Cross Head Stamp, Counter Plunger, , Push Rod Lifter, Rocker Arm (hhp), Transition Screw Coupling, Coupler Body, High Capacity Draft Gear, Coupler Yoke, Yoke Pin Etc. Released From Diesel & Ac Locomotives & Tower Wagon. Qty. 51.115 Mts Depot Lot No. Sse/d/et/24-25/35 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2. Lot To Be Sold On Actual Weight Only. 3.cutting Is Allowed For Easy Loading, Any Other Material If Found Other Than Mentioned Ferrous Item Will Not Be Delivered.

Description: CATEGORY: RING SEAL , BEARING ROLLER , BUSHING , VALVE NEEDLES , LINING BRAKE 1 , LINING BRAKE , SOLENOID SWITCH , DRIVE ASSY , LIGHT REAR COMBINATION LH , LIGHT REAR COMBINATION RH

Description: CATEGORY: Fuel Filter Assy , Fuel Pipe Line , Pilot Valve , Safety Valve , Air Line , Drive Belt , Bty Terminal , Air Compressor Pipe Cyl to Tank , Air Pressure Pipe , Compressor Air Filter , Bty Lid , Ignition Switch

Description: CATEGORY: Single lever exposed parts kit of HI FLO N , Alive range bath tub spout , Shower arm 20mm dia and 450mm long round S , Alive maze overhead shower 200x300mm , Single lever basin mixer without popup W alive , Counter top basin of size 600x400x185mm , Waste coupling 32mm F thread allied , Angular stop cock alive , Wall hung WC with UF seat cover , Metropole flush valve concetype 32mm florentine , M S chair bracket P coated heavy , Towel rack with single rail with hooks , Soap dish holder kubix , Corner glass self with bracket , Toilet roll holder with flap , Tumbler holder Kubix , Soap dispenser with Glass bottle , Towel ring square , Hand SH HLTH FCT 1 point 2mtr Flex tube , Swivel mirror 630x445 mm rectangular SH , Concealed body for single lever high flo

Description: Comprehensive Operation, Preventive Maintenance & Repairs Of Civil Structures, Various Type Of Pipeline, Various Type Of Valves, Storage Structures, Pumping Machineries And Electrical Equipment Etc. Located At Different Head Works And Sub Headwork Sites Including Supply Of Potable Water To All The Hamlets/villages/cities For 36 Months Period For Khambha Rwss, Ta.:khambha , District : Amreli. ( 4th Attempt)

Description: Delivery Valve Spring