Valve Tenders

Description: Icf Coach-annavaram-plno:98111048 (hsn Code-72042910) Cond And Unserviceable Bg 8 Wheeler Over Aged Converted Ocv Coach (icf)-sc Camping Coach No-089215 - 01no; Said To Contain - Ms-29.406 Mt. Aluminium (mech)-0.3040 Mt, Window Frames, Vention Shutters, Decolams, Compreg Sheets, Wood, Wool, Limpet Sheet, Rexene, Foam And Pvc Etc, Weight 0.4496mt). Total Weight : 30.16 Mt Approx. Reclaimable(rc) Items For One Coach Consist Of 1) Complete Wheelset-04 Nos, 2) All Axle Boxes With Bearings-8 Nos, 3) Distributor Valve-01 Nos, 4)control Reservoir-01 Nos And Bronze Wearing Piece-4 Nos- To Be Handed Over To Custodian While On Before Loading Time , At Loading Spot. Coach Lying On Rails And Under Ohe. Sale By Number Basis, Delivery By Lot Basis. Cutting Is Permitted For Loading Purpose Only. Coach Are Available At Annavaram Yard,tt Machine Siding. Under Control Of Sse/c&w/rjy. Coach Ds-8 No-23220001, Date.24/01/25. Note 1]all Berths Available In Coaches Are Also Part Of The Lot. 2] The Purchaser Is Strictly Instructed To Stack All The Rc Items At One Location Well Away From The Cut Up Parts Of The Coaches And The Custodian Is Advised To Lift The Same On The Day Of Delivery Affected. [before Affecting/commencing/starting Of The Delivery Itself]. 3] The Purchaser Is Responsible For Providing Adequate Safety Firefighting Equipment On The Spot At The Time Of Cutting And Delivery. The Purchaser Shall Be Liable To Make Good Any Damage/loss Caused To Railway Property During Cutting Or Delivery.4] Any Reclaimable Items Found In Excess To The Below, At The Time Of Cutting And Delivery Of Coaches Should Be Returned To Railways 5] The Purchaser Is Instructed To Remove All Debris Arising From Cutting Of The Lot Purchased ,from The Cutting/loading Spot And Keep The Delivery Spot Neat And Clean Before The Final Lorry Delivery, Failing Which, The Final Lorry Will Be Stopped.ipf/rjy."

Description: U/s Condemned Aluminium Scrap ( Alluminium -5.202 Mt + Brass -0.025 Mt + Bronze - 0.17 Mt + Fe- 0.136 Mt) Total 5.533 Mt 1) U/s Distributor Valve Make Escors (ek) Aluminium And Brass , Weight Per Item (kg) - Alluminium- 5.767 Kgs, And Brass (0.100 Kgs) Qty -02 Nos, Total Weight (kg)- 11.534 Kgs 2) U/s Distributor Valve Make Knorr (kb) Aluminium And Brass, Wt Per (item (kg) Qty 02 Nos , Total Wt(kg)- 11.664 Kgs, 3) U/s Distributor Valve Make C3w (kb) Aluminium And Brass, Wt Per Item (kg) - Alluminium- 7.439 Kgs And Brass (0.200 Kgs), Qty 05 Nos, Total Wt- 37.495 Kgs 4) U/s Spare Parts Of Distributor Valve And Air Brake Equipments Of Aluminium I.e. 1) Relay Valve 2) Bottom Cover 3) R-charge 4) Name Plate (aluminium), Weight Per Item (kg) , 1) Relay Valve 2.800 Kgs Qty 14 Nos (2.800 X 14 = 39.200 Kgs) 2) Bottom Cover -0.100 Kgs ( 04 Nosx 0.100 = 0.400 Kgs) 3) R-charger-0.600 Kgs ( 8 X 0.600 = 4.80) 4) Name Plate (allum.) 0.012 (0.012 X 600 = 7.20 Kgs Total 51.6 Kgs 5) Released Aluminium Armoured Cable Of Various Size (fe- 230 Kgs, Pvc- 410 Kgs, Alluminium- 610 Kgs Total 1250 Kgs 6) U/s Spare Parts Of Brake Cylinder With Slack Adjuster 1) Dome Cover- Alluminium- 3.011 Kgs ( 05 Nos X 3.011 Kgs = 15.050 Kgs 2) Cylinder Body -fe- 8.557 Kgs (140 Nos X 8.557 = 1197.98 Kgs) 3) Ratchet With Adjusting Screw Ferrous-4.730 Kgs (50 Nos X4.730 Kgs = 236.50 Kgs 4) Bmbc Trunion Body- Brass-1.363 Kgs ( 10 Nos X 1.363 Kgs = 13.63 Kgs 7) Axle Box Rear Cover (alluminium Casting), Wt Per Item - 3.85 Kgs Each , Qty 300 Nos , Total Wt (kg) - 1155 Kgs, 8) Axle Box Front Cover (aluminium Casting) , Wt Per Item 4.5 Kgs, Qty 40 Nos, Total Wt (kg)- 180 Kgs 9) Alluminium (consisting Of Chequered Plate , Fiat Moulding And Other Moulding , Total Weight 1500 Kgs, 10) Junction Box For Speed Senor Consisting Of Aluminium, Stainless Steel, Plastic, Wt Per Item (kg)( 0.625 Kg X 34 Nos ) = 21.25, (0.080 Kgsx34nos) =2.72, ( 0.120 X 34 Nos) = 4.08 Kgs(10) Aluminium Levelling Valve ( 0.800 Kgsx 21 Nos) = 16.80 Kgs , Aluminium Duplex Check Valve ( 0.600 Kgs X 06 Nos ) = 3.60 Kgs, (11) Sd Tech Distributor Valve Consist Of Aluminium Brass, Rubber, Plastic & Iron , ( 22.595 Kgs X 50 ) = 1129.75 Kgs, ( 0.376 Kgs X 50 ) = 18.80 Kgs(, 0.230 Kgs X50) = 11.50kgs ,(2.720kgs X 50 ) = 136.0 Kgs. (12) Overhead Aluminium Water Tank 455 Ltrs, Overhead Aluminium Water Tank 390 , ( 72 Kgs X 05 ) = 360 Kgs, ( 49.250 X 02 ) = 98.50 Kgs

Description: Procurement Of �diaphragm Rubber & Rubber Lined Diaphragm Valve� (as Per Specification) For 2x250 Mw Dspm Tps, Korba, E.

Description: Work Contract For Round The Year Maintenance Of Auxiliaries/mechanical Devices/valves/pipe Lines Etc. Of Area Comprising Of Hydrogen Plant, Fire Pump House, Domestic Pump House & Hvac System Ccb At Ktps, Cspgcl, Korba East.

Description: Procurement Of Cast Steel Valve 100nb And 200nb, Gun Metal Valve & Gun Metal Gate Valve 50mm For Generator Stator Air Cooling System At Hbhps, Machadoli.

Description: Preliminary information for the purpose of shortening the deadline for receipt of offers - General guidelines (construction work) Daycare center "in der Eck" New building - Technical building equipment (tga) Start of work: February 2026 Completion of work: October 2026 Rough dimensions of shell construction Drainage: Pipeline Kg 2000-dn 110 to Dn 160: 650.0 m Bend Kg 2000-dn 110 to Dn 160: 270.0 pcs Drinking water Pe pipe: 50.0 m District heating pipe Eco Flex Thermo Twin 50/4.6: 50.0 m Grease separator: 1.0 pcs Kg 410 Sanitary The Drinking water is supplied via the public water supply network of the Steinbach water supply company. For hygiene reasons, hot water is supplied via decentralized, electronic instantaneous water heaters. The entire drinking water consumption is recorded in the technical center. The entire network of drinking water pipes is located in the suspended ceiling of the building. To ensure drinking water hygiene, the pipes are looped through. Each section of the looped drinking water pipe is equipped with a hygiene station that ensures that the water in the pipes is exchanged every 72 hours. The entire drinking water network is made of stainless steel and the insulation is aluminum-coated mineral wool. Rough dimensions: Stainless steel system pipe Crnimo DN 12-40 including insulation: 560 m Hygiene flushing station drinking water: 5 pieces Automatic backwash dirt filter drinking water: 1.0 piece Instantaneous heater: 30.0 pieces Soundproof socket pipe - DN 50 to DN 110: 250 m Floor drains: 5.0 pieces Urinals: 6.0 pieces Toilet system: 21.0 pieces Disabled toilet system: 2.0 pieces Wash basin: 29.0 pieces Shower: 3.0 pieces All systems including assembly modules, ceramics and accessories. Kg 420 Heating The building is heated by two air-water heat pumps, which are located outside in the direction of the garbage area. A low-pressure buffer tank for the underfloor heating is planned in the building. The pipes laid in the suspended ceilings and central unit are made of stainless steel, the insulation of the pipes is made of aluminum-coated mineral wool. The pipes laid in the screed for the underfloor heating are planned to be made of Pe-xa. Rough dimensions: Air-water heat pump 33 kW: 2.0 pieces Heat distributor including 2 pump groups: 1.0 piece Stainless steel system pipe Crnimo Dn 15-65 including insulation: 600 m Buffer storage 1,000 liter: 1.0 piece Floor area: 1,900 m2 Pipe length underfloor heating: 11,000 m Fbh Heat distributor: 10.0 pieces Msr technology: 1.0 Psch Kg 430. Ventilation system The interior rooms are mechanically ventilated and de-ventilated. The supply air is reheated via electric heating registers if necessary and supplied to the rooms. The exhaust air is also collected in the rooms via separate exhaust air elements and discharged through the ventilation units. All air conditioning systems are equipped with heat recovery. The ventilation system is controlled to ensure a constant air exchange. The air conditioning unit (air conditioning unit) for the kitchen is placed outside. For the remaining rooms, decentralized ventilation units are installed in the positions provided for them in the suspended ceilings. Overview of air handling units: Ventilation unit Short name Area Air volume Air handling unit 01 RLT-01 Kitchen 2,500 m³/h Air handling unit 02 RLT-02 Technical center 270 m³/h Air handling unit 03 RLT-03 Toilet area general 520 m³/h Air handling unit 04 RLT-04 Children's bathrooms-u3 360 m³/h Air handling unit 05 RLT-05 Children's bathrooms-ü3 810 m³/h Rough dimensions: Air handling unit: 5.0 pieces Air ducts Rectangular galvanized steel Incl. fittings: 815.0 m2 Spiral seam duct galvanized steel Dn100 - 250 Incl. fastening and fittings: 190.0 m Roof hood for fort and Outside air: 8 pieces of plate valves, supply and exhaust air: 60.0 pieces, fire dampers: 16.0 pieces, Kg 434. Air conditioning systems The server room of the building is cooled with a split air conditioning unit to prevent the servers from overheating. Rough dimensions: Outdoor and indoor unit including connection and fastenings: 1.0 piece Kita "in Der Eck" new building - technical building equipment (tga) Start of work: February 2026 Completion of work: October 2026 Rough dimensions shell drainage: Pipeline Kg 2000-dn 110 to DN 160: 650.0 m Bend Kg 2000-dn 110 to DN 160: 270.0 pieces Drinking water Pe pipe: 50.0 m District heating pipe Eco Flex Thermo Twin 50/4.6: 50.0 m Grease separator: 1.0 piece Kg 410 Sanitary The drinking water supply is provided via the public water supply network of the water supply company Wasserversorgung Steinbach. For hygienic reasons, the hot water supply is realized via decentralized, electronic instantaneous water heaters. The entire drinking water consumption is recorded in the technical center. The entire network of drinking water pipes is located in the suspended ceiling of the building. To ensure drinking water hygiene, the pipes are looped through. Each section of the looped drinking water pipe is equipped with a hygiene station that ensures that the water in the pipes is exchanged every 72 hours. The entire drinking water network is made of stainless steel and the insulation is aluminum-coated mineral wool. Rough dimensions: Stainless steel system pipe Crnimo DN 12-40 including insulation: 560 m Hygiene flushing station drinking water: 5 pieces Automatic backwash dirt filter drinking water: 1.0 piece Instantaneous heater: 30.0 pieces Soundproof socket pipe - DN 50 to DN 110: 250 m Floor drains: 5.0 pieces Urinals: 6.0 pieces Toilet system: 21.0 pieces Disabled toilet system: 2.0 pieces Wash basin: 29.0 pieces Shower: 3.0 pieces All systems including assembly modules, ceramics and accessories. Kg 420 Heating The building is heated by two air-water heat pumps, which are located outside in the direction of the garbage area. A low-pressure buffer tank for the underfloor heating is planned in the building. The pipes laid in the suspended ceilings and central area are made of stainless steel, the insulation of the pipes is made of aluminum-coated mineral wool. The pipes laid in the screed for the underfloor heating are planned to be made of Pe-xa. Rough dimensions: Air-water heat pump 33 kW: 2.0 pieces Heat distributor including 2 pump groups: 1.0 piece Stainless steel system pipe Crnimo Dn 15-65 including insulation: 600 m Buffer storage 1,000 liter: 1.0 piece Floor area: 1,900 m2 Pipe length underfloor heating: 11,000 m Fbh Heat distributor: 10.0 pieces Msr technology: 1.0 Psch Kg 430. Ventilation system The interior rooms are mechanically ventilated. The supply air is reheated via electric heating registers if necessary and supplied to the rooms. The exhaust air is also collected in the rooms via separate exhaust air elements and discharged through the ventilation units. All air conditioning systems are equipped with heat recovery. The ventilation system is controlled to ensure a constant air exchange. The air conditioning unit (air conditioning unit) for the kitchen is placed outside. For the remaining rooms, decentralized ventilation units are installed in the positions provided for them in the suspended ceilings. Overview of air handling units: Ventilation unit Short name Area Air volume Air handling unit 01 RLT-01 Kitchen 2,500 m³/h Air handling unit 02 RLT-02 Technical center 270 m³/h Air handling unit 03 RLT-03 Toilet area general 520 m³/h Air handling unit 04 RLT-04 Children's bathrooms-u3 360 m³/h Air handling unit 05 RLT-05 Children's bathrooms-ü3 810 m³/h Rough dimensions: Air handling unit: 5.0 pieces Air ducts Rectangular galvanized steel Incl. fittings: 815.0 m2 Spiral seam duct galvanized steel Dn100 - 250 Incl. fastening and fittings: 190.0 m Roof hood for fort and Outside air: 8 pieces Plate valves for supply and exhaust air: 60.0 pieces Fire dampers: 16.0 pieces Kg 434. Air conditioning systems The server room of the building is cooled with a split air conditioning unit to prevent the servers from overheating. Rough dimensions: Outdoor and indoor unit including connection and fastenings: 1.0 pieces

Description: Construction Of Feeder Tunnel, Desander, Hrt, Sft, Surge Shaft, Valve House , Adits And Its Appurtenant Works And Associated Project Roads Of Sirkari Bhyol

Details: CATEGORY: Air cleaner filter of Maruti Gypsy , Accelerator cable of Maruti Gypsy , Backlight assembly of Maruti Gypsy , Clutch bearing of Maruti Gypsy , Clutch cable of Maruti Gypsy , Clutch plate of Maruti Gypsy , Waterbody assembly of Maruti Gypsy , DDLI coil of Maruti Gypsy , Valve cup seal of Maruti Gypsy , Door strip of Maruti Gypsy , Radiator assembly of Maruti Gypsy , Front brake caliper assembly of Maruti Gypsy , Front brake pad of Maruti Gypsy , Front bumper assembly of Maruti Gypsy , Front disc rotter assembly of Maruti Gypsy , Front leaf spring 2nd of Maruti Gypsy , Front leaf spring 3rd of Maruti Gypsy , Front shall upper lower set of Maruti Gypsy , Front plastic corner of Maruti Gypsy , Front shock absorber of Maruti Gypsy , Fuel ignition relay of Maruti Gypsy , Fuel filter of Maruti Gypsy , Fuel tank assembly of Maruti Gypsy , Glass machine assembly of Maruti Gypsy , Tailboard outer handle of Maruti Gypsy , Engine overhauling gaskit set of Maruti Gypsy , Hose pipe clip of Maruti Gypsy , Ignition switch of Maruti Gypsy , Hose pipe of Maruti Gypsy , Nylon hood assembly of Maruti Gypsy , Parking light assembly of Maruti Gypsy , Pressure plate of Maruti Gypsy , Propellor shaft 2 of Maruti Gypsy , Radiator hose pipe UL of Maruti Gypsy , Rear axle cone of Maruti Gypsy , Rear axle spacer of Maruti Gypsy , Rear brake shoes of Maruti Gypsy , Rear leaf spring 2nd of Maruti Gypsy , Rear leaf spring 3rd of Maruti Gypsy , Rear leaf spring assembly of Maruti Gypsy , Rear main leaf spring of Maruti Gypsy , Rear plastic corner of Maruti Gypsy , Rear shock absorber of Maruti Gypsy , Rear silencer assembly of Maruti Gypsy , Rear wheel axle bearing of Maruti Gypsy , Rear wheel axle stud of Maruti Gypsy , Rear wheel brake cylinder of Maruti Gypsy , Shackle assembly of Maruti Gypsy , Side indicator mudguard of Maruti Gypsy , Side mirror LR of Maruti Gypsy , Spark plug oil seal of Maruti Gypsy , Sparking plug of Maruti Gypsy , Steering box assembly of Maruti Gypsy , Suspension bushkit of Maruti Gypsy , Tailboard hings of Maruti Gypsy , UJ cross of Maruti Gypsy , Widow cardboard of Maruti Gypsy , Valve cotter of Maruti Gypsy , S rod bush of Maruti Gypsy , M oil filter of Maruti Gypsy , Backlight glass of Maruti Gypsy , Wiper blade set of Maruti Gypsy , Fan belt of Maruti Gypsy , Shocker bush of Maruti Gypsy , Delta rubber of Maruti Gypsy , Bumper piece FR of Maruti Gypsy , R wheel oil seal of Maruti Gypsy , Protector oil seal of Maruti Gypsy , Tappet cover gaskit of Maruti Gypsy , Tie rod Assembly set of Maruti Gypsy , Brake Booster of Maruti Gypsy , TMC Assembly of Maruti Gypsy , Rod spring sleeve of Maruti Gypsy , Wiper machine assembly with link of Maruti Gypsy , Air Cleaner filter Zen Estilo of Maruti Suzuki Esteem , Backlight assembly LR Zen Estilo of Maruti Suzuki Esteem , Front brake pad Zen Estilo of Maruti Suzuki Esteem , Headlight assembly Zen Estilo of Maruti Suzuki Esteem , M oil filter Zen Estilo of Maruti Suzuki Esteem , Spark plug Zen Estilo of Maruti Suzuki Esteem , Front axle LR of Maruti Alto 800 , Front Brake Pad of Maruti Alto 800 , Spark Plug of Maruti Alto 800 , M Oil Filter of Maruti Alto 800 , Air Cleaner Filter of Maruti Alto 800 , Rear brake shoes set of Maruti Alto 800 , Accelerator Cable of Maruti Alto 800 , Clutch Cable of Maruti Alto 800 , Clutch plate pressure plate of Maruti Alto 800 , Clutch bearing of Maruti Alto 800 , Wiper blade set of Maruti Alto 800 , Wiper blade set of Maruti Ertiga

Description: Regret Letter And Award Letter For Refurbishment Of Boiler Feed Pump Turbine Low Pressure Control Valve On Unit 1 – Unit 6 At Lethabo Power Station For Period Of 5 Years.

Description: Regret Letter And Award Letter For Refurbishment Of Boiler Feed Pump Turbine Low Pressure Control Valve On Unit 1 – Unit 6 At Lethabo Power Station For Period Of 5 Years.