South Africa Tenders

* Refer To Gk12500372 Base Station Transceiver <(>&<)> Vehicle Mounted Antenna Specifications The City Requires Air-band Transceivers And Related Accessories For Aviation Related Operations. The Airband Transceivers Must Meet The Icasa Legal Requirements. Icasa Type Approval Certificates Must Be Provided On Delivery. The Air-band Radio Must Meet The Following Specification: 1. The Air-band Transceiver Must Be In The "base Station" Form Factor. 2. The Air-band Transceiver Must Include The Hand Microphone. 3. The Air-band Transceiver Must Be Supplied With A Suitable Vehicle Mounted Antenna Tuned For Air-band, With A Compatible Antenna Connector. General (base Station) Frequency Range (tx/rx) 118.000#136.992 Mhz Channel Spacing 25 Khz/8.33 Khz Type Of Emission 6k00a3e, 5k60a3e (fcc/exp) 6k00a3e (industry Canada) Operating Temperature Range #30°c To +60°c; #22°f To +140°f Frequency Stability ±5 Ppm (#30°c To +60°c) Antenna Connector So-239 (50 O) Number Of Memory Channels 200 Channels Power Supply Requirements 13.75 V/27.5 V Dc Current Drain (at 13.75 V) Tx 5.0 A (maximum) Rx Stand-by 0.5 A Max. Audio 4.0 A Dimensions (w×h×d) 161×45×175 (mm) Weight (approximately) 1.5 Kg; 3.3 Lb (main Unit) Ingress Protection Standard Ip54 Transmitter (base Station) Output Power (at 13.75 V) 9.0 W Typical Spurious Emissions Less Than #60 Dbc Modulation 70% To 100% Microphone Impedance 600 O Receiver (base Station) Intermediate Frequencies 38.85 Mhz/450 Khz (1st/2nd) Sensitivity (at 6 Db S/n) Less Than 1 Μv Selectivity 8.33 Khz 2.778/7.37 Khz (6 Db/60 Db) 25 Khz 8/25 Khz (6 Db/60 Db) Spurious Response Rejection Audio Output Power (at 10% Distortion, 60% Modulation) Internal Sp (8 O Load) 1.5 W Typical External Sp (8 O Load) More Than 10 W Headphone (500 O Load) More Than 100 Mw Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***

* Tape - Type: Petro Anti Corrosion; Size: 100mm; Length: 10m; Standard: Awwa C217- 09. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***

* Please Supply And Deliver 138 Two Tier Steel Lockers Dimensions :1800h X 300w X 450d Colour:grey Hammertone Must Have Hanging Rails In Both Sections On The Top And The Bottom Must Be Lockable Must Have Hasp And Staple For Padlock Facility Must Have A Five Year Warranty. "1. Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation,supplier To Complete Rfq Sample Checklist Attached To Ad 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent# To Be Delivered To Various Community Recycling Centers: Simonstown Hout Bay Woodstock Ravensmead Gordonsbay Belhar Atlantis Killarney Welgelegen De Grendel Tygerdal Kensington Mplain Schaapkraal Prince George Drive Retreat Wynberg Induland Please Contact: Tasneem For Arrangement Of Delivery Tasneem.seartz@capetown.gov.za

* Repairs To Be Done Or Specification Of The Product:rear Shocks X2 Registration Number & Type Of Vehicle:cct33522 Toyota Etios Vin Number: N/a Mileage: N/a Hrs Notification Number:902150863 Contact Person:nikita Jacobs Department And Address: Sts Corporate Services, 23 Oude Molen Rd N'dabeni Tel: 021 417 4047 Fax: Quotation Received No: * Repairs To Be Done Or Specification Of The Product:red Coolant Registration Number & Type Of Vehicle: Cct33506 Polo Vivo 1.4 Vin Number: N/a Mileage: N/a Hrs Notification Number:902163695 Contact Person:nikita Jacobs Department And Address: Sts Corporate Services, 23 Oude Molen Rd N'dabeni Tel: 021 417 4047 Fax: Quotation Received No:red Coolant

* Ballast - Type: Luminaire High Pressure Sodium Vapour; Wattage: 70w; Voltage: 240v; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". ****please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Made Non-responsive**** *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.** In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Complete Mbd6.1 Form With Your Rfq! Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points

* Gg12500475 Timber;pine;50mm;76mm;4.8m;treat Ruf 1.nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2.please Ensure That You Attach The Rfq Sample Checklist, Technical Data Sheets With Pictures And The Certificaiton Documentation (s Ans/sabs/sanas/jawswic) Where Applicable Of All Items Quoted On, To Your Rfq Submisison. Information Provided/attached In Relation To Specifications Must Be Submitted To The Email Address On Or Before The Closing Date And Time Of The Rfq For Evaluation:****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent"

* Gg12500479 Glass Sheet;clear;flt;1175mm;575mm;4mm 1.nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2.please Ensure That You Attach The Rfq Sample Checklist, Technical Data Sheets With Pictures And The Certificaiton Documentation (s Ans/sabs/sanas/jawswic) Where Applicable Of All Items Quoted On, To Your Rfq Submisison. Information Provided/attached In Relation To Specifications Must Be Submitted To The Email Address On Or Before The Closing Date And Time Of The Rfq For Evaluation: ****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent"

* Switch Socket; Amperage: 16a; Configuration: Double; Size: 4x4;mounting: Flush; Specification: With Plate; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". * Switch Socket; Amperage: 16a; Configuration: Double; Size: 4x4;mounting: Flush; Specification: With Plate; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". -----delivery To Various Stores----- **********please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Made Non-responsive.********** *****nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.*****

* Remote Switching Unit - Type: Hard Wired Pendant; Application: Remote Tripping And Closing Of The Circuit Breaker On 11kv Switchgear Range - Lmx, Rps, Unigear, Zx0.2; Voltage Class: 30 - 110v Dc; Functions: Open Function Shall Comprise Of A Red Momentary Push Button With A Normally Open And Normally Closed Contact, Respectively. Close Function Shall Comprise Of A Green Momentary Push Button With A Normally Closed And Normally Open Contact, Respectively.; Lead: 30m Long, 4-core, 1.5mm2 Copper Conductor With A Silicone Outer Jacket.; Connector: Mil Spec, 4-pin, Bayonet Type Canon Plug, Suitable For Canon Socket Of Type - Itt Canon Ca3102f14s-2sb,or Equivalent To The Engineer#s Approval; Degree Of Protection: Ip54; Drawing: Unit To Comply With Drawing - Sk 5305 Attached; Specification: Cee 88; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". **********please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Made Non-responsive.********** *****nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.*****

* Gg12500471 1.nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2.please Ensure That You Attach The Rfq Sample Checklist, Technical Data Sheets With Pictures And The Certificaiton Documentation (s Ans/sabs/sanas/jawswic) Where Applicable Of All Items Quoted On, To Your Rfq Submisison. Information Provided/attached In Relation To Specifications Must Be Submitted To The Email Address On Or Before The Closing Date And Time Of The Rfq For Evaluation:****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent"