South Africa Tenders

* Quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Autogear 12v/18ah 900 Amp Jump Start Voltage: 12 V, Battery Capacity: 900 Ah, Rated Current: 18 A Features: Constant Start Current. Start Current 400a/ Peak 900a. Automatic Overload Protection. Contains An 18ah Sealed Lead-acid Battery. Includes 12v Dc Charger <(>&<)>amp; 230v Ac Charger. Features A Led Work Light For Emergency Use. Rechargeable 38cm X 14cm X 40cm (+-9kg) Department: Ssiu Contact Person: F Alexander 021 4003784/ 071 770 3986 Location: 100 Fairway Close, Parow, 7500 * Bennett Read Hpw180 Dynamic Pressure Washer 1800 W Not Less Than 110 Bars High Pressure Gun <(>&<)> Cable (not Less Than 5mtres) Integrated Soap Dispenser Hose Not Less Than 5mtres Wash Brush Department: Ssiu Contact Person: F Alexander 021 400 3784/ 071 700 3986 Location: 100 Fairway Close, Parow, 7500

* Manhole Cover - Type: Sabs Type 2a; Material: Polymer; Cover Dimensions: Ø610mm; Seating Dimension: 80mm; Dimension Tolerances: Cover Dimension Tolerance Of +0mm /-2mm. Seating Dimension Tolerance Of ±2mm. Frame Dimension Tolerance And Nominal Daylight Opening Dimension Tolerance Of ±5mm; Compatibility: To Be Compatible For Replacement In A Sabs Type 2a Frame. In All Instances Where Covers Are To Be Compatible With Frames, The Fitment Shall Be Flush And Not Create A Step With The Surface Of Installation Of Frame; Class Duty: Heavy Duty; Force: 135kn; Shape: Circular; Material Composition: The Resin Shall Be A Resin Specifically Made For Casting Which Conforms To The Requirments As Defined In Sans 713 - Unsaturated Polyester (up) Resin Systems; Specifications: Solid Top. New City Specification; Branding: Casting To Be Branded With The "city Of Cape Town", "stormwater", "h" For Heavy Duty Class, "sabs" Mark And Manufacturer Name; Standards: The Manhole Cover Shall Comply With Sans 1882. Product Markings As Per Sans 1882. Certificate Of Conformance To Sabs Standards To Accompany Every Delivery. Proof Of Conformance And Test Reports To Be Supplied On Request; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Important: Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Valuation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared No N-responsive. Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero-point Allocation. ***please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This***

* `quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** 1 X Bf80 80mm Diaphragh Pump Honda Gp160 1 X Genset 6.0kva 220v Id6000 Nsm Honda Contact : A Brits : 021 400 3258 / 0835886377 Sample Pictures Attached * 1 X Bf80 80mm Diaphragh Pump Honda Gp160 1 X Genset 6.0kva 220v Id6000 Nsm Honda Contact : A Brits : 021 400 3258 / 0835886377 Sample Pictures Attached

* Concrete Channel - Type: C1; Size: 125mmx90mmx300mmx1m; Standard: To Comply With Sabs 927; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Important: Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Valuation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared No N-responsive. Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero-point Allocation. ***please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This***

* `quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Specifications # Diameter (mm): 1,0 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 / 4,0 / 4,5 / 5,0 / 5 ,5 / 6,0 / 6,5 / 7,0 / 7,5 / 8,0 / 8,5 / 9,0 / 9,5 / 10,0 / 10,5 / 11,0 / 11,5 / 12,0 / 12,5 / 13,0 # Working Length (mm): 12 / 18 / 24 / 30 / 33 / 39 / 43 / 47 / 52 / 57 / 57 / 63 / 69 / 69 / 75 / 75 / 81 / 81 / 87 / 87 / 94 / 94 / 101 / 101 / 101 * Specifications Weight 1.840000 Kg Minimum Order Quantity 1 Length 310 Mm Width 195 Mm Selling Uom Ea Height (mm) 45

* Quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** 32 Piece Backpack Tool Kit Hellerman Tyton Elecbp Or Equivalent Must Contain The Following Items: 1 X Heavy Duty Uninsulated Crimper (1.5 - 16mm2) 1 X 8mm Socket Wrench Screwdriver 1 X 10mm Socket Wrench Screwdriver 1 X 5 Led Headlight With Adjustable Settings 1 X 38mm Cable Cutter 1 X Wire Stripper 1 X 160mm Long Nose Pliers (super Range) 1 X 200mm Pliers (super Range) 1 X 200mm Diagonal Cutter (super Range) 1 X 200mm Adjustable Spanner 1 X Utility Knife 1 X 7 Piece 1000v Insulated Screwdrivers 1 X Universal Panel Key 1 X 5m Magnetic Tip Tape Measure 1 X 250mm Vice Grip 1 X 300g Ball Pein Hammer 1 X Junior Hacksaw 1 X 7 Piece Allen Key Set 1 X 250mm Groove Joint Pliers 1 X 300mm Groove Joint Pliers Backpack Must Be Water Resistant And Suitable For Harsh Working Environments. For Any Information Please Contact Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services; Water And Sanitation Tel: 021 417 4148| Cell: 076 521 5612 * Fibre Optic Visual Fault Locator Proskit Mt-7530 Or Equivalent Approved Required Specifications: Wavelength: 650nm±10nm Output Power: 30 Mw Light Source: Class Iiib Test Distance Up To 20km Connector Type: 2.5mm Fc/st/sc Universal Connector Power: 2× Aa 1.5v Battery Powered For Any Information Please Contact Marque Cupido System Specialist Instrumentation, Automation And Data Management, Eam, Technical Services; Water And Sanitation Tel: 021 417 4148| Cell: 076 521 5612

* Metal Sheet - Material: Galvanised; Thickness: 3mm; Width: 1225mm; Length: 2450mm; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Important: Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Valuation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared No N-responsive. Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero-point Allocation. ***please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This***

* `quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Pulse Automated Targeting Device Notification/work Order No: Depot:reticulation Schaapkraal Loc:philippi Vendor: Depot Contact Person:trevor Grootjie Depot Person Contact Number:021 444 2540 Important: Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Valuation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared No N-responsive. Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero-point Allocation. ***please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This***

* Bend - Type: Socketed Both Ends; Material: Upvc; Size: 110mm; Degree: 22.5deg; Class Type: Class 34; Standards: Sabs 791; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Important: Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Valuation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared No N-responsive. Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero-point Allocation. ***please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This***

* Quotation Conditions Nb Please Submit Sample Picure Or Spesification Sheet, If Not Received You May Be Deemed Non Compliant Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Specifications Jigsaw Makita 450w 4329k; Model 4329k Or Equivalent * Specifications: Welding Machine Welder Inverter 200a 220v # Lightweight <(>&<)> Portable # Digital Display # Advanced Igbt Technology # Suitable For Arc/tig Welding # 35-50 Dinse Plug # Supplied With Welding Cables Technical Data # Arc200 Mat9050 # Input Power Voltage Single Phs Ac220v±10% # Rated Input Power Capacity 5.3kva # No Load Voltage 56v # Output Current Range 20-195a # Rated Output Voltage 26.2 # Duty Cycle 60% # Weight 8kg # Dimensions (lwh) 371 X 155 X 295mm * Chainsaw Husqvarna 450e Chainsaw With 20 Inch Bar Or Equivalent Slimmer Saw Body, Flip-up Tank Caps, And Easy Starting Even With A Slower Pull. Reduced Fuel Consumption And Exhaust Emissions Are Benefits Of The X-torq® Engine. The Saw#s Tool-less Chain Tensioner, Transparent Gas Gauge, And Auto-return Stop Switch All Contribute To Its User-friendliness. Features Smart Start® And A Fuel Pump For Hassle-free Starting Every Time. Chain Speed At Max Power 17,3 M/s Cylinder Displacement 50,2 Cm³ Power Output 2,4 Kw Emission Exhaust Emissions (co2 Eu V) 742 G/kwh Equipment Scientific Services Form No: As/sop 03(1)/2 Rev(amdt) No.:00 Effective Date: 2012-01-10 Recommended Bar Length, Min 33 Cm Recommended Bar Length, Max 50 Cm Pitch .325" Chain Type Sp33g Bar Length 50 Cm Bar Length (inch) 20 In Dimensions Weight (excl. Cutting Equipment) 5,1 Kg Sound And Noise Sound Pressure Level At Operators Ear 104 Db(a) Sound Power Level, Guaranteed (lwa) 115 Db(a) * Cordless Blower Makita 18v Cordless Blower Dub185z Or Equivalent # Variable Speed Control By Trigger # 3 Air Volume Settings: Low, Medium, High # Increased Air Volume # Compact And Lightweight Design # Ergonomic Soft Grip # Vacuum Function - Can Be Used As A Vacuum With A Dust Bag. # Equipped With Battery Protection Circuit: Designed To Protect The Battery From Damages Due To Over Discharge, High Temperature Or Overload Current. Technical Data Air Pressure 5.8 Kpa Voltage 18v 3.0ah Or 1.3ah Sound Pressure Level 83 Db(a) Sound Power Level 94 Db(a) Vibration Lev 2.5 M/s² No Load Speed (r/min) 0-18,000r/min Dimensions (lxwxh) 525 X 155 X 212mm Net Weight 1.6kg Includes 1x Nozzle Assembly Solo - Machine Only And Does Not Include Any Batteries Or Charger * # Ideal Choice When Powerful And Accurate Cuts Are Needed # 545mm Rip Cut Capacity; Cutting Depths Of 80mm Straight <(>&<)> 55mm Angle # 1,800w Motor With High Torque And Ideal Overload Capacity # Precision Made Easy: Robust Steel Table Ensures Stability While Working # 265mm Table Extension With Sliding Wheel For A Larger Cutting Range # Comes With Robust <(>&<)> Stable Metal Stand That Ensures Stability Included # 1 X Circular Saw Blade, Optiline Wood, 254 X 2,8/1,8 X 30mm Specifications Saw Blade Diameter 254mm Incline Setting 45° L / 0° R Table Size 555 X 555mm Rated Input Power 1,800w No-load Speed 4,300rpm Saw Blade Bore Diameter 30mm Tool Dimensions (width X Length X Height) 690 X 620 X 1000mm Cutting Height 90° 80mm Cutting Height 45° 55mm Max. Cutting Capacity On The Right 545mm