Scrap Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 17676 With Available Items [refer Enclosure For The Approximate Weight And Material Composition ].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc]- 1no. S.1539 No.124442 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Description: Locos-02nos - Sale Is On Number Basis And Delivery Is By Lot (the Fdp Is 65 Days For This Lot). Lot No 5321 24 09 60 Gtl Gtl Con Locos Ap. Available With Sse Dsl Gtl. Scrap Cond.unserviceable Alco Diesel Locomotives 02nos. Of 14779/wdg 3a And 14898/wdg 3a . 1) Ferrous Items Weight- 191678.000 Kgs (approx). 2) Copper Items Weight- 13176.000 Kgs (approx). 3) Brass Items Weight- 1680.000kgs (approx). 4) Aluminium Items Weight- 1284.000 Kgs (approx)5)insulation/rubber- 1432.000 Kgs(approx). Total: - 209250.00 Kgs (approx). 1) For Loco No. 14779/wdg3a Rc Items List Are Enclosed At Annexure-ii, From 1 To 2 And Major Condemned Items List Enclosed At Annexure-i, From 1 To 86. 2) For Loco No. 14898/wdg3a Rc Items List Are Enclosed At Annexure-ii, From 1 To 2 And Major Condemned Items List Enclosed At Annexure-i, From 1 To 86. Delivery On Lot Basis. Sale On Number Basis. Available At Diesel Loco Shed, Guntakal. Hsn Code: 720429/gst 18%. Ds.8 No.053211038 And 053211039, Dt. 14.09.24. For Full Description Along With The Annexures Of Two Loco¿s Reclaimable Items And Major Condemned Items And Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. The Fdp Is 65 Days For This Lot. Important Note To Bidders: (1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances.(2) Bidders May Visit The Loco Shed For Physical Inspection Of The Material And The Premises Of The Lot, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.5) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Such As Fire Extinguishers Etc, Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) Railways Reserve The Right To Provide Placement Of Locos After The Date Of Auction Depending Upon The Availability Of Space For Cutting. If Any Hsd Oil Available In Fuel Tank Of The Said Locos, The Same May Be Return To The Custodian, Railways Are Not Responsible For Any Shortage.

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Details: Sources Sought Notice manufacturing Circulated, Uncirculated And Proof Copper-plated-zinc Planchettes this Is Not A Solicitation, Request For Quote (rfq) Or Proposal (rfp). This Sources Sought Notice Is For Informational And Planning Purposes, Only. This Announcement Is Strictly Intended For Market Research And Shall Not Be Construed As A Solicitation, Obligation Or Commitment By The Government. please Note, In Accordance With 31 U.s.c. §5136, No Provisions Of Law Governing Procurement Or Public Contracts Are Applicable To The Procurement Of Goods Or Services Necessary For Carrying Out The United States Mint Programs And Operations. the United States Mint, Manufacturing Procurement, Washington, Dc Is Issuing This Sources Sought Notice As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement For Circulating And Un-circulated Copper-plated Zinc (cpz) One-cent Planchets To Be Delivered To The Philadelphia And Denver Mints. Also Included In This Requirement Is Proof Cpz One-cent Planchets For The San Francisco Mint. Cpz Planchets Shall Be In Accordance With The Requirements And Specifications Set Forth Herein the Raw Material Acquired Must Produce Coins That Are Compatible With Existing Coinage In Circulation Within The Vending, Banking, Commerce As Well As The General Public. The Raw Material Breaks Down Into Two Separate Alloys. The One-cent Alloy Composed Of 2.5% Copper (cu) And 97.5% Zinc (zn). general Specifications For United States Mint Coinage Strip: plated Blank Dimensions Of Standard Cpz Planchets Weight (individual Blank) 2.50 Grams ± 0.16 Grams Plated Diameter 18.75 Mm ± 0.05 Mm Plated Gauge 1.255 Mm ± 0.043 Mm (preferred Tolerance ± 0.030 Mm) Plating Thickness 0.008 Mm + 0.017 Mm/-0.003 Mm Upset Configuration Same As Pre-plated (c.2.1) Upset Edge Thickness 1.461 Mm ± 0.076 Mm Overall Thickness 1.626 Mm Maximum “a” Dimension On Upset 0.64 Mm ± 0.05 Mm “b” Dimension On Upset 1.27 Mm + 0.13 Mm/-0.00 Mm Estimated Volume Requirements: denomination annual Volume pieces weekly Volume kilogram/pieces 1-cent 2.5 – 5 Billion 40 – 260 M in Addition, The United States Mint Generates Scrap. The Contractor Must Be Able To Recycle And Use Returned Scrap From The Coining Process As Feed Stock For Future Coinage Strip. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement. The Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 3314. if Your Organization Has The Potential Capacity To Perform These Contract Services, Please Provide The Following Information: 1) Organization Name, Address, E-mail Address, Web Site Address, Telephone Number, And Size And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By December 31, 2024. All Responses Under This Sources Sought Notice Must Be Emailed To James.bacinski@usmint.treas.gov & Amalee.elayyan@usmint.treas.gov.

Description: * Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** 3 X Rotosure 32cm Measuring Wheel Deluxe Type 10km: Rot1050 Specifications Zero Reset On Handel Folds In Half Push Button Release Clip Push Button Zero Reset Kick Down Side Stand Convenient Carry Handle Debris Removing Scraper Follwong Fine Edges Runs In Straight Line Balanced In Line Movement Better Traction Wheel Runs In Sealed Roller Bearings Heavy Duty Trigger Brake Zero Point Indicator Please Deliver To Tasmiyah Karbelkar Bloemhof Electrical Head Office Bellville Contact Details: 072 401 6906

Description: Scrap Cond. Abandoned Railway Quarters, Consisting Of Rcc, Brick Masonry, Doors And Window Rails, Steel, Wood, Ac Sheets Total Qty 52 Nos Quarters. These Quantity Are Only Indicative 1) Brick Masonry Approximate Qty 1678.00 M3 2)wood 62.39 M3, Approximate 3) Steel, 6509.12 Kg Approximate 4)r.c.c. Only 88.54 Approximate 5) Ac Sheet. 2291.01 M2 Approximate, 6) Wooden/steel Door/windows 251 Nos Approximate. Abandoned Quarters Details- 1) Qtr. No. D/338/ab , D/339/ab, O4nos. 2) Qtr. No. D/340/ab O1nos , 3) Qtr. No. Tyg/2/a, 3/ab, 4/ab, 5/ab, 6/ab, 8/ab,h/26/ab 13nos. ,4)qtr. No. Rb-i 470/abcdef, 471/abcdef 12 Nos. . 5)qtr. No. Rb-i/483/abcde 5 Nos. (location Of Sr. No. 1 To 5 Total 36 Nos Qtrs. At 18 Block Railway Colony Et. 6)qtr. No. H/78//a To G 07 Nos. 7)qtr. No. H/31/a 01 Nos. 8)qtr. No. H/4/a 01 Nos. 9)qtr. No. Tyj/5ab 02 Nos. (location Of Sr. No. 6 To 9 Total 11 Nos Qtrs. At Porter Chal Railway Colony Et. 10)qtr. No. Rb I/208/a-d 04 Nos. ,11)map/153/ab 2 Nos. (location Of Sr. No. 10 To 11 Total 06 Nos Qtrs. At 3 Block/12 Block Railway Colony Et. (total Qtrs Under Sse/w/m/et 52 Nos ) Sse Lot No. Ss-11/sse/w/et-2024-25/01 Note: 1. Any Other Material Found Nearby The Lot It Will Not Be Delivered. 2. Delivery Will Be Given On As Is Where Is Basis By Lot(texture Unit Wise). 3. It Is Strictly Advised To Bidder To See The Lot Personally Before Biding For The Lot, Any Dispute About Quantity Will Not Be Considered After Bidding. 4. Cutting, Dismantling May Be Allowed For Easy Loading Purpose At The Cost And Risk Of Purchaser. 5.dismantling Permitted Up-to Ground Level Only. 6. Purchaser Should Ensure That During Cutting Dismantling Nearby Structures Building Should Not Be Affected. 7. Purchaser Will Be Fully Responsible For Any Mishaps. 8. Trains Operations And Other Railway Work Should Not Be Disturbed And Suitable Banners At Work Place Has To Be Arranged By Purchaser. 9.after Delivery Complete Removal Of Rcc , Cc, Bricks Masonry And Rubbish From Site Will Be Permitted. 10. The Land Should Be Cleared Of All Debris. 11. All Pway Material, S&t And Electrical Materials, Fencing, Fencing Gates Items Are Returnable Items Which Are Not Included In Auction And Not Permitted To Take Along With Other Auctioned Items, All Returnable Items Which Can Be Transported To Depot Will Be Submitted In Depot. 12.the Material Which Is Taken Out By The Purchaser Of Various Other Department Will Be Checked Jointly By Sse(works) And Sse Of Respective Department And Deposit It To In Depot Of Concern Department Sse.

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 14672 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]- 06 Sets. [2] Exciter Generator -01 No [3] Aux. Generator - 01 No [4] Bkbl -01 No [5]resister Grid -12 Nos [6] Inter Cooler Air Compressor - 02 Nos [7] Air Compressor -01 No. S.1539 No.124447 Dt.21.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Description: Lot No.divn/nmp/34/10/24-25/bg/cond./8w/wgn. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/wgn. Without Contents If Any. 1) Ne 30048863251 Bcnm1 (nlb) 2) Er 30028962394 Bcnm1 (nlb) 3) Nr 30038961462 Bcnm1 (wm) 4) Scr 30098961198 Bcnm1 (wm) 5) Er 30028912306 Bcnm1 (wm) Nb: (1): I) Wagons Are To Be Sold Without 04 Nos. Nlb Trolleys Against Srl. No. 01 And 02. Ii) Wagons Are To Be Sold With 06 Nos Wm Trolleys Against Srl No. 03 To 05. Iii) All Wagons To Be Sold Without 20 Nos. Wheel Sets With Ctrb, Brake Cylinder Complete, Brake Gear Complete, Hand Brake Set Complete With Connecting Link, Bush, Seam Less Pipe With Fitting For Air Brake Equipment, Distributor Valve, Apm Valve, Sab, Coupler Body With Shank Wear Plate, Knuckle, Knuckle Pivot Pin, Coupler Yoke, Yoke Pin, Yoke Pin Support With Wear Plate, High Capacity Draft Gear With Draft Gear Follower, Etc And Other Excluded Fitting As Per Latest Excluded Fitting List * *excluded Fitting List Letter No. M2/c-19/e.ftg/ 1302 Dt.25.10.2023, Nb(2): Special Condition For Rolling Stock- A) All Excluded Fitting Along With Nlb Trolleys Are To Be Handed Over By The Purchaser To Sse/c&w/nmp At (nimpura) And Wheel Sets To Sse/44/nws/kgp Respectively Nominated Location Suggested By The Concerned Sse Respectively For Which They Have To Arrange Labour,tools & Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Nominated Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labour And Hand Over The Same To Concern Stock Holder With Clear Acknowledgement. (b) The Excluded Fittings Should Be Kept Away From The Cutting Lines And Adjacent Areas So That Future Grounding Of Rolling Stock Is Not Hampered In Any Way. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. (c) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register. "purchaser Has Cleared All Nil Value Item Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site. (d) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolleys/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. (e)the Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In Near Vicinity Of The Cutting Spot/ Loading Point And Unloading Point Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery, And Also He Will Be Solely Responsible Of Any Loss Applied (railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Transportation Loading And Unloading Of All Excluded Fittings Of The Wagons. Including Wheel Sets And Trolleys. Nb: (3) Delivery Will Be Given In Numbers.

Details: Description Acrylic Latex Paint Flat Finish Paint, Color: Kitten White Or Winter Morning, Or Close Alternative 12 Gal Acrylic Gloss Roof Paint Color: Coastlight Dv 50-92 12 Gal Roller Paint Brush With Handle: 7 " 20 Pcs Roller Paint Brush Refill Size 7" 50 Pcs Roller Paint Brush With Handle: 4 " 20 Pcs Roller Paint Brush Refill Size 4" 50 Pcs Paint Brush: 4" 20 Pcs Paint Brush: 2" 20 Pcs Paint Brush: 1" 20 Pcs Pvc Paint Roller Tray 20 Pcs Stainless Steel Paint Scraper/spatula 4" 10 Pcs Blue Sheet Trapal, Color: Blue Orange (makapal) 50 Meters Multipurpose Rugs, Round 15 Kilos Include Delivery To Non-com Pops Facility, Pnoc Industrial Park Mariveles Bataan

Description: Condemned And Unserviceable Linen Scraps Such As Iii Ac/ii Ac Bed Sheets, Iii Ac/ii Ac Blankets, Iii Ac/ii Ac Pillows, Iii Ac/ii Ac Hand/face Towels, Iii Ac/ii Ac Pillow Covers, I Ac Bed Sheets, I Ac Blanket, I Ac Pillow, I Ac Pillow Covers, I Ac Towels On As Is Where Is Basis Under The Custody Of Sse/c&w/pf/tpj/sr.(i) Iii Ac/ii Ac Bed Sheets-74,459 Nos-32,547kgs,(ii)iii Ac/ii Ac Blankets-1,871nos-3,357kgs, (iii) Iii Ac/ii Ac Pillows-7,015nos-2,895kgs,(iv)iii Ac/ii Ac Hand/face Towels-21,860 Nos-2,409kgs, (v) Iii Ac/ii Ac Pillow Covers-40,910 Nos-3,121kgs, (vi)1st Ac Bedsheets-268 Nos-101kgs, (vii) I Ac Blankets-11 Nos-21kgs, (viii)1st Ac Pillow-77 Nos-56kgs (ix)i Ac Towel-08 Nos-3 Kgs, (x) 1st Ac Pillow Covers-135 Nos-14kg. Total Qty-44,520kgs (approx). Location-first Floor Of Sse/c&w/pf/tpj. Note-(1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction, (2)post Auction No Representation Shall Be Entertained, (3)delivery Should Be Made On Actual Weighment Basis Only, (4)purchaser Has To Cut The Corners Of The Material Not Less Than 3 Inches And It Should Be Ensured Before Commencing Delivery, (5)segregation/pick And Choose Should Not Be Permitted, (6)if Any Extraneous Material Found In The Lot The Same Should Be Handed Over To The Custodian At The Time Of Delivery, (7)neighboring Undeclared And Nfs Items Shall Not Be Disturbed, (8)it Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. Ds8 No.733201 Dt. 27.07.2024. Pl No. 98415852. Hsn Code.63090000.