Sand Filter Tenders

Description: CATEGORY: Custom Bid for Services - Complete Management of House Keeping Other Activities of Electric Loco Trip Shed premises including the loco cleaning HLC filter cleaning AC filter cleaning sand filling with repairing calibration of equipment at Trip Shed ..

Details: - Modernizaton/upgradation of existing parks/green belts. SH - SITC of Ornamental Poles,Post top LED Lights, Monocolour flood lights, uplighter, Feeder Pillar and Automatic sand media filter unit alongwith other allied accessories for Conservation of Roshnara bagh Monument under HD-2 North Zone.

Details: Hydro- geological & Geo-Technical Sub Surface Investigation, Surveying, Planning, Designing, Construction & Commissioning of approx 5.0 meter dia Infiltration Gallery Collector well with laying of Stainless steel strainer including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with HT substation and guard room at vicinity of High Bank at Subarnarekha River (Kerwari), with necessary approach bituminous road, boundary wall, earth filling, internal drain, river side pitching, Civil, Electrical (according to I.E. rules), Mechanical & all other allied works related for pump house with necessary approval from respective Competent Authority including lighting within yard, pump house, walkway and internal illumination complete and laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves, temporary road restoration works for raw water rising main work and Jack Pushing works and pillar carrying pipe line in all respect for Raw And Clear water rising main work andConstruction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per departmental design, drawing & Specification etc at zone – A & Zone – B. and 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir with 400 cum capacity sedimentation tank and Slow sand filter of area 1000 Sqm minimum, Chlorination treatment unit, administrative building along with minimum 500 KVA capacity HT Sub Station, land development , approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works complete in all respect, on turnkey basis as per satisfaction of the department. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement under AMRUT 2.0 Project.

Description: Supply of Various Equipment for Mandroseza I Factories Divided into Twelve (12) Lots: - Lot No. 1: Electrical Equipment - Lot No. 2: Electromechanical Equipment - Lot No. 3: Tranquilizers - Lot No. 4: Hydraulic Equipment - Lot No. 5: Anthracite - Lot No. 6: Calibrated Sands for Filters - Lot No. 7: Tools - Lot No. 8: Various Hardware - Lot No. 9: Graphite Braids for Pumps - Lot No. 10: Various Bearings for Electric Pump Groups - Lot No. 11: Lubricants - Lot No. 12: Laboratory Equipment

Description: Condemned, Heavy Ferrous Scrap Released From Diesel Locomotives. The Lot Consisting Of 1] Cylinder Heads 2] Compressor Liners 3] Compressor Body 4] Shock Absorber 5] Couplings 6] Brake Hangers 7] After Cooler Covers 8] Stay Plates 9] Brake Cylinders 10] Camshafts 11] Brake Ring Parts 12] Fasteners 13] Blower Parts 14] Blower Impellers Shaft And Body 15] Water Pump Body Impeller And Shaft 16] Fip Supports 17] Cross Heads 18] Sand Box And Components 19] Pipelines 20] Electrical Components, Ns Parts 21] Resilient Pads 22) Push Rods 23] Compressor Shafts 24] Headlight Assembly Body 25] Traction Motor Gear Box 26] Air Brake Pipings And Valve Components 27] Traction Motor Pinion 28] Crankshaft And Main Shaft Bearings 29] Ada Parts 30] Split Pins 31] Brake Heads 32] Fip Parts 33] Radiator Ferrous Parts 34] Injector Body And Parts 35] Side Bearers 36] Wire Ropes 37] Piston Rings 38] Hanger Pins 39] Damaged Girders And Angles 40] Removed Tore Steel Rods 41] Filter Parts 42] Gears 43] Sander Bracket 44] Cyclonic Filter Body 45] Ms Radiator Grills 46] Compressor Fan Guards 47] Cam Rollers 48] Valve Guides And Yokes 49] Ms Compressor Piston 5o] Connecting Rod 51] Gear Pump, Body And Gears 52] Transition Rods 53] Clevis, Knuckles 54] Auxiliary Alternator Body And Cover 55] Ms Fabricated Sheet 56] Springs 57] Impellers 58] Ecc Body And Spider 59] Etp Plant Body Parts 60] Nails And Nut Bolts 61] Cylinder Liners 62] Connecting Rods And Pistons 63] Grids 64] Compressor And Ab Valve Body As Is Where Is Basis. - Total Qty : 30.00 Mt , Custodian : Sr. Section Engineer/diesel Loco/ernakulam Jn. Location : Sse, Diesel Shed, , Ernakulam Yard., S.1539 No.053430-24-01687 Dtd. 20.08.2024. Note- Delivery To Be Made On Actual Weighment Basis.. Special Conditions: - 1] Segregation Of The Material Is Strictly Not Permitted., 2] Purchaser [by Engaging His Own Labourers] Is Permitted To Load The Items And Hand Over The Non - Ferrous And Excess Quantity To The Custodian.,3] Any Material Found In The Lot Other Than The Material Description, During Delivery, The Same Be Returned To The Custodian. 4) Jurisdiction- The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/ Arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. 5) Forfeiture Of Bsv Payment Along With Emd.-in Southern Railway Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable., 6) Part Delivery-part Delivery Is Not Permitted Against Part Payment On Southern Railway., Nfs/side Assets : 1] One Stack Of Released Brake Blocks, Released Hoses Of Varoius Types, Released Empty Drums, Condemned Ferrous Scrap Released From Diesel Locomotives Etc Are Available Near The Lot, Being Scrap Yard Of Sse/dsl/ers. [pl No. 98057054, Hsn Code : 720429, Gst : 18 % On Fcm], Item : Actual Weighment Ms Item. [image Attached].

Details: Description 1 Lot - Php2,000,000.00 4units - "stainless Steel Table : Dimension (lxwxh) : 200x70x84cm 1 Layer Table Top Shelf : 1.0mm 304 Stainless Steel Sheet Footing : 1 1/2 304stainless Steel Round Tube Roller" 1unit - "moisture Meter: Digital Moisture Meter Repeat Error: ≤ 0.2% Measurement Range: 3-35% Ambient Temperature: 0-40 ℃ Weight: Industry Standard Power Supply: Four Aa Alkaline Batteries Or External 6v Dc Power Supply " 3units - "table Top Vacuum Sealer 10 Inches Sealing Capacity 2 Packs/min In 120 Pcks/hr Volts: 220 With 60hz Power: 0.75kw Heat Sealing Power:0.6kw Lowest Absolute Pressure: 1.33kpa Volume Of Vacuum Case: 385x390x90mm Number Of Heat Strips: 1 To 2pcs Exhaust Of Vacuum Pump: 260x8mm Dimension: 480x 330x360 Weight :38kgs" 1units - "horizontal Band Sealer Voltage (v/hz): 220/60 Sealing Width (mm): 10 (0.39inches) Temperature Range (c): 0-300 Power(w):50 Sealing Power (w): 300x2 Distance From Sealing Center To Conveyor Table (mm): 150 To 270 Conveyor Table Size (l W) (mm): 840x153" 1units - "mechanical Weighing Scale Platform Type: Bench Scale (open Pan) Rated Load: 1000kg Accuracy: 50g " 2units - "digital Weighing Scale Capacity (kg): 0-15kg Readability (g): 0.1g Pan Size (mm): Φ255*190mm Display: Lcd (white Back Light) Print: Rs232c Power : Ac/dc Unit : G, Oz, Lb, Ct, Gn ,pcs , % Packing (cm) : 32*24*16cm G.w./n.w. (kg): 3.5kg/3kg" 1units - "cylinder Screen Printing Machine For Pen, Bottles Or Other Round Products Max Frame 320*210mm Max Diameter 60mm Max Circumference 200mm Max Printing Size 200*100mm Dimensions (l*w*h) 680*310*220mm Weight 20kg" 1units - "diesel Generator Set: Rated Voltage: 220v, Rated, Current: 20.4a Maximum Rated Output: 10kva Rated Speed: 3600 Rpm, Rated Frequency: 60hz Fuel: Diesel Fuel Tank Capacity: 15 L Type (72-75db), Current: 25-27.3a, , Silent Type Rotor Coils: Pure Copper" 1units - "computer Unit Complete With Accessories And Printer: 16gb Intel Core I7 10th Gen, 24"" Windows 11 Operating System Processor: Intel Core I7-10700 Power Supply : 650watts Gold Rated Memory: 16 Gb Of Ddr4 System Memory Storage: 1tb Ssd Display: 24"" Display With Ips Panel 650va Ups Keyboard And Mouse Computer Speaker Computer Table And Chair Camera: Hd Webcam With: 1280 X 720 Resolution, 720p Hd Audio/video Recording" "3-in-1 Printer: Printing Technology:on-demand Inkjet (piezoelectric) Nozzle Configuration:180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Print Direction:bi-directional Printing Maximum Print Resolution:5760 X 1440 Dpi (with Variable-sized Droplet Technology)5760 X 1440 Dpi (with Variable-sized Droplet Technology) Minimum Ink Droplet Size:3 Pl Printer Language:esc / P-rautomatic 2-sided Printing: No Dimensions (w X D X H):375 X 347 X 179 Mm " 1unit - "label Printing Machine: Inkjet Type: Desktop Color Laser Printer For Matte, Glossy And Vinyl Automatic Grade: Automatic Duplex Driver Type: Electric Direct Print: Usb Drive Printing Size: A4 Adhesive Sticker Side Printing: Double Side Voltage:220v Dimension: (l*w*h) 650*345*450*mm Weight: Industry Standard Printing Speed Capacity: ≥20pcs/min Max Print Resolution: 1200 X 1200dpi" 1units - "label Cutting Machine: Type: Paper Cutting Plotter Voltage:220v Operational Method: Roller – Type Cutting Speed: 400 (15.7 Inches Per Second) Max Cutting Width: 600mm Max Cutting Force: 250g Max Cutting Length: 50mm Max. Media Loading Width: 719mm Acceptable Material Thickness: 0.8mm Memory Buffer: 500kb Weight: Industry Standard Cutting System: Auto Aligning System" 1units - "4 Layer Steel Cabinet: 4 Layercabinet Dimension: In Cm L-60cm X W-46cm X H-131.5cm Gauge: 20 Thickness Powder Coated Finish Central Lock Mechanism " 1units - "water Purifying System W/ Stainless Tank & Motor Pump Inclusive Of Installation & Accessories Power Supply: 220v Raw Water Pump: 0.37kw Carbon Filter, Cartridge Filter, Warranty Of Core Components: 1 Year Core Components: Pressure Vessel Pump, Plc, Weight: Industry Standard Power: 1.75kw, 1.7kw Material: Frp+pvc Electric Water Pump: 3hp Filter Media: Sand + Carbon + Resin Processing: Pre-treatment + Reverse Osmosis Desalination Sterilization: Uv Or Ozone Water Tank Capacity: 2000l" 1units - "banana Chipper/ Slicer: Food Grade Stainless Steel Material, Output Capacity : 300-500kg/h, 1–2 Mm Thickness 200v/380v, 0.75kw, Size 650x700x 1200mm" 1units - "electric Ginger Slicer: Stainless Steel Wire Slicing Machine Voltage: 220v Power : 300w Blade 3mm Material Stainless Steel Motor Speed: 1400r/min Production Efficiency: 100-150kg/h Size 23*22*38.5cm " 6units - "burner Stove (complete With Accessories) : Heavy Duty Stock-pot Burner 2 Knobs High Pressure 45cm L X 45 Cm W X 40cm H Burner Grill Size: 30mm ⌀" 1units - "electric Ginger Grinder: Stainless Steel Processing Capacity : 100kg Adjustable Thickness Fineness Adjustable Within The Range Of 20 Mesh-200 Mesh Voltage: 220v/ 60hz/ 3hp"