Sand Filter Tenders
Stem Water Distribution And Infrastructure Company Private Limited Tender
Civil And Construction...+3Road Construction, Consultancy Services, Civil And Architectural Services
Eprocure
India
Closing Soon19 Jun 2025
Tender AmountINR 26 Million (USD 303.1 K)
Description: Enhancement Of Water Quality Using Alagae Side Chemical Reagent For Sand Cleaning Topping Of Godra River Filter Sand For Filter Beds And Designing Of V Wire At Wtp Temghar.
Indian Army Tender
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
India
Closing Soon20 Jun 2025
Tender AmountINR 217.8 K (USD 2.5 K) This is an estimated amount, exact amount may vary.
Details: CATEGORY: Antiscalent chemical , High Pressure Water Pump repairing
work , Complete fitting work , Membrane cleaning , Flow
switch , Volt Amp Frequency Meter VAF , RO Membrane ,
MCB 4 Pole , Micro filter 2 Inch x 20 Inch , Silica sand ,
Multigrade carbon , Beg filter , Panel Board wiring work ,
Misc Items and Service Installation work
Indian Army Tender
Paints and Enamels
GEM
India
Closing Soon18 Jun 2025
Tender AmountRefer Documents
Description: CATEGORY: PAINT RED OXIDE , PAINT SAND , THINNER , LEATHER
CLOTH BLACK , VELLCROW , SHEET CELLULAR , SR 955 ,
NMATTING RUBBER , STEEL MILD PIPE SQUARE ONE INCH ,
STEEL MILD PIPE SQUARE ONE AND ONE HALF INCH , LOOM
TAPE , COPPPER WIIRE FOUR MM , BLACK PAINT , AC GAS ,
SCREW , M SEAL , FEVI QUICK , TIE BELT , WELDING ROD ,
EMERY PAPER , ANABOND , PAINT SAND COLOUR , OIL
FILTER , FUEL FILTER , FUEL PIPE , WASHER , FEN BELT ,
CASTIC SODA
Ministry Of Science And Technology Cotabato City Maguindan Tender
Textile, Apparel and Footwear...+1Machinery and Tools
Philippines
Closing Soon16 Jun 2025
Tender AmountPHP 10 Million (USD 179.7 K)
Details: Description 28 Hi-speed Self-oiling Sewing Machine Specification: - Motor Type: Industrial-grade Clutch Or Servo Motor - Rated Power: 250w (1/3 Hp) - Voltage: 220v, 50/60hz - Torque Output: 2.2–2.8 Nm - Stitch Type: Lockstitch (single Needle) - Max Stitch Length: 5 Mm - Needle System: Dbx1, Sizes #11–#20 - Material Support: Denim, Canvas, Polyester, Cotton - Lubrication System: Internal Automatic Lubrication - Table: Steel-reinforced Laminated Wood, 40mm Thickness 28 Portable Edging / Overlock Sewing Machine Specification: - Stitch Type: 3-thread Or 4-thread Overlock - Needle System: Dcx27, Size #24 - Sewing Speed: 1500–1700 Spm - Thread Tension Control: Manual Rotary Tensioner - Motor Type: Brushless Dc Motor - Battery: 36v, 5000mah Lithium-ion - Battery Runtime: 3–4 Hours - Charging Time: ~2 Hours - Weight: 3.5 Kg 29 Heavy-duty Straight Sewing Machine Specification: - Motor: 220v Clutch Or Servo Motor - Table: Heavy-duty With Anti-vibration Supports - Sewing Speed: Up To 5,000 Stitches Per Minute Machine Head: Full-metal Construction Designed For Industrial Use. Set Inclusions: - 5-drawer Wooden Cabinet - Reinforced Metal Legs With Leather Drive Belt - Accessory Box: Needles, Bobbins, Oil, And Instruction Manual Supported Fabrics: - Oxford Fabric - Spandex/spandy - Satin, Silk, Jersey Knit Applications: Perfect For Continuous Garment Production In Tailoring Shops Or Training Centers. 1 Computerized Embroidery Machine Specification: Function: Precision Embroidery For Garments, Home Decor, And Textile Arts. Key Features: - Built-in Droplight Marker For Accurate Embroidery Positioning - 25 Built-in Embroidery Designs And 28 Adjustable Embroidery Lettering Fonts - Extra-large Embroidery Area: 300 Mm × 200 Mm - High-definition Asv Lcd Touchscreen Interface - Embroidery Speed: Up To 1,000 Stitches Per Minute - Frame Detection: Compatible With Border, Quilt, Round, And Clamp Frames - Usb Port Support For External Embroidery Design Uploads (if Supported By Model) Recommended Use: Ideal For Small-scale Mass Production Of Customized Embroidery And Boutique-level Garment Embellishments. 1 Locally Fabricated Sewing System For Inaul Weaving Specification: - Purpose: Tailored For Traditional Inaul Textile Production - Material Compatibility: Fine Silk, Satin, Cotton Blend, Polyester - Included Features: • High-torque Industrial Sewing Head • Variable Stitch Length (0–6 Mm) • Multiple Bobbin Threads And Color-coded Thread Sets • Reinforced Stainless Steel Table • Foot And Knee-lift Pedal System - Custom Fabrication: Designed To Accommodate Handwoven Fabric Tension - Motor Type: Clutch Motor Or Servo Motor - Needle System: Dbx1 Or Compatible Universal Type 2 Tarpaulin Machine Specification: -heavy Duty - Ink Type: Eco-solvent Or Dye Sublimation - Color Channels: Cmyk (4-color), Optional Lc/lm - Max Resolution: 1440 X 1440 Dpi - Print Speed: • Draft: 35 Sqm/hr • High Quality: 15 Sqm/hr - Media Width: Max 1900 Mm (6.2 Ft) - Media Thickness: ≤ 1.5 Mm - Ink Supply System: Continuous Bulk Ink System (1.5l Tanks) - Interface: Usb 2.0 / Ethernet - Software: Maintop Rip (icc Profiles Supported) - Os Compatibility: Windows 7 / 10 (64-bit Preferred) - Power Supply: Ac 220v, 50/60hz - Power Consumption: 300–350w 1 Water Refilling System Specification: - Capacity: 250 Liters Per Hour (lph) - Purification Stages: 5–7 Stages Including Ro, Uv, And Carbon - Membrane Vessel: Ss304 Stainless Steel - Ro Membrane: 80–100 Gpd X 2 Units - Pumps: High-pressure Booster Pump, 0.75 Hp - Piping Material: Upvc / Stainless Steel - Pre-filtration: • Sand Filter (multi-grade) • Activated Carbon Filter - Control System: Programmable Logic Controller (plc) - Control Valve: Manual + Automatic Backwash Timer - Waste Water Ratio: 1:2 - Power Input: 220v Ac, 50/60hz - Safety Certifications: Fda, Iso 9001, Doh-compliant - Frame Material: Powder-coated Steel Or Stainless Steel - Weight: 350 Kg - Dimensions: Approx. 1800 X 800 X 1600 Mm - Daily Output Capacity: ~6000 Liters Per Day 13 Bakery Stationary Oven (lpg Operated) Specification: Oven Type: Lpg Operated Capacity: - Tray Capacity: 12 Trays Per Load - Tray Size: 18 X 13 Inches (standard Planza) Dimensions: - Overall: 57 X 54 X 30 Inches (l × W × H) Materials & Build: - Food-grade Stainless Steel, Hard And Thick - Removable Assembled Stand - Wood Door Handle For Safe Grip Features: - Built-in Thermometer - Safe Pilot Knob Ignition System - Supplied With 3 Filled Lpg Tanks (11 Kg Each) 15 Commercial Dough Mixer Specification: - Material: Stainless Steel (food-grade) - Capacity: 15 Kg Per Batch - Dimensions: 76 × 93 × 92 Cm - Blade Type: Round Knife Or Interchangeable - Speed: 6/13r With Bowl Rotation Speed 100r/min - Power: 1hp (1500w), 220v - Color: Gray Or Polished Stainless Finish - Safety: Overload Protection, Non-slip Base 14 Stainless Steel Working Table Specification: - Dimensions: 72" × 36" × 32" (l×w×h) - Material: 316 Food-grade Stainless Steel, 18 Gauge - Surface Finish: Machine-polished Satin Finish - Design: Double-layer Shelf For Storage - Features: Rust-resistant, Heavy-duty Steel Frame 1 Bakery Stationary Oven (electric Operated) Specification: Type: Combination Oven (convection + Steam) Capacity: - Main Oven: 2 Trays × 1 Layer - Convection Oven (model: Hcv-5): 5 Trays - Proofer (model: Dcpv10): 10 Trays - Total Load Capacity: 12 Trays Per Batch Dimensions: - Product Size: 1278 × 1170 × 1905 Mm Power Ratings: - Oven: 4.2 Kw - Convection: 9.5 Kw - Proofer: 2.2 Kw Voltage: 380v (or Customized For Local Setup) Max Temperature: Up To 300°c (oven Interior) Technology: Ibs Infrared Baking System Additional Features: - Removable Assembled Stand - Durable Stainless Steel Construction - Energy-efficient Heat Distribution 1 Electric Coconut Grater With Squeezer Specification: - Roller Cylinder Size: 4.5" Diameter × 16.25" Long - Construction: • Stainless Steel Food-grade Body • Cast Iron Footing Stand • Bushings, V-type Pulley & Chain Drive - Safety: Emergency Foot Brake, On/off Switch With Safety Box - Power: 2 Hp Motor, 220v - Size: 40 × 40 × 44 Inches (h×w×d) 1 Commercial Mixer Specification: - Interchangeable Plates: Grilling & Panini Press Attachments - Voltage: 220v - Bowl Speed: 6/13 R/min - Mixing Rotation: 100 R/min - Color: Gray Finish (stainless Optional) Structure: - Food-grade Stainless Steel Bowl - Compact, Reinforced Base For Heavy Loads - Variable Speed Options (manual Or Digital Controller) 2 Commercial Noodle & Dumpling Machine Specification: - Machine Type: Electric Desktop Roller Press - Power Rating: 550w - Voltage: 220v, 50hz (single-phase) - Output Capacity: 50 Kg/hour - Roller Width: 300 Mm - Blade Width: 160 Mm - Belt Width: 300 Mm - Dimensions: 32 × 23 × 36 Cm - Weight: 21.5 Kg - Material: Food-grade Stainless Steel - Function: Pressing & Shaping Of Dough For Noodles, Dumplings, Pasta 1 Grain Grinder Machine Specification: - Production Capacity: 40 Kg/hour - Particle Size Output: 20–200 Mesh (adjustable) - Core Components: Copper-wound Induction Motor - Voltage: 220v - Material: Stainless Steel Shell And Grinding Chamber - Weight: 60 Kg - Applications: Corn, Rice, Herbs, Coffee Beans, Flour Production 1 Coconut Kernel Oil Press With Temp Control Specification: - Type: Electric Temperature-controlled Press - Voltage: 220v - Power: 2000w - Working Capacity: 12–25 Kg/h - Oil Yield: 35–45% (depending On Source Material) - Dimensions: 56 × 20 × 38 Cm - Weight: 20–45 Kg (depending On Model) - Material: Food-grade Stainless Steel (304) - Control Panel: Digital Thermostat With Auto-shutoff 1 Commercial Bakery Oven Specification: - Oven Type: Electric, Gas Power: 19800w Voltage: 380v Dimension (l X W X H) 1220*820*1530mm Weight: 210kg Usage : Baking Bread, Pizza Meat Baguette Capacity : 3 Layers Materials: Stainless Steel 304 Warranty: 1 Year Warranty After Delivery And Inspection. Inclusive Of All Fees, Taxes And Duties. Delivery Of Machinery Must Be Deliver To The Respective Area. --------------nothing Follows------------------
11-20 of 25 active Tenders