Painting Tenders

Details: Description 2nd Posting The Barangay Government Of Macolabo Is., Paracale, Camarines Norte, Through Its Bids And Awards Committee (bac) Invites A Contractor Registered With And Classified By The Philippine Contractor Accreditation Board (pcab) To Apply For Eligibility And To Bid For The Hereunder Projects: Rehabilitation Of Evacuation Center Barangay Macolabo Is. Paracale, Cn C-1 Concrete Works 66 Lm Pre-painted Hi-rub Type Long Spam Roofing 0.50mm 6 Pcs. 0.50m Pre-painted Spanish Gutter 4 Pcs. 0.50 Pre-painted Ridge Roll 8 Pcs. 0.50mm Pre-painted Flashing 7 Pcs. Sanepa 12"x8ft 0.1 Box 5/32 Blind Rivets 1600 Pcs. 2" Teck Screw 1 Ltr Touch-up Paint 4 Tube Sealant 20 Pcs. 2"x2"x5mmx6.0m Angle Bar 25 Pcs. 1 1/2"x 1 1/2"x 3/16" X 6.0m Angle Bar 10 Pcs. 1 1/2"x 3/16"x 6.0m Flat Bar 20 Pcs. 2"x4"x1.50mm C-purlins 600 Pcs. 1" Hard Screw 4 Gals. Red Oxide Primer 1 Gals. Lacquer Thinner 30 Kls. Welding Rod 3 Pcs. Paint Roller & Basin 3 Pcs. 2" Paint Brush 5 Pcs. 14" Cut-off Wheel 5 Pcs. Drill Bit 5/32 Approved Budget Cost: P250,000.00 Source Of Fund : 20% Bdf 2024 Prospective Bidders Should Have Pass The Pcab License Applicable To The Contract, Have Complete A Similar Contract With At Least 50% Of The Abc And Have Key Personnel And Equipment Listed In The Eligibility Forms Available For The Prosecution Of The Contract. The Bac Will Use A Pass Or Fail Criteria, Post Qualification Of The Lowest Calculated Bid Shall Be Conducted. All Particulars Relative To Eligibility Statement Of Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Awards Of Contract Shall Be Governed By The Pertinent Provisions Of The Revised Implementing Rules And Regulations (irr) Of R.a. 9184. Activities Schedule 1. Submission Of Letter Of Intent – May 27, 2025 At The Barangay Hall Of Macolabo Is., Paracale, Cn. 2. Issuance Of Eligibility Forms And Bidding Documents - May 27, 2025 To June 4, 2025 At The Barangay Hall Of Macolabo Is., Paracale, Cn. 3. Deadline Of Submission Of Bidding Document – Before 1:00 Pm Of June 4, 2025 At The Barangay Hall Of Macolabo Is., Paracale, Cn. 4. Opening Of Bids – June 4, 2025 At 1:00pm Barangay Hall Of Macolabo Is., Paracale, Cn 5. Bid Evaluation And Post Qualification – June 10, 2025 To June 12, 2025 6. Notice Of Award 7. Contract Agreement 8. Notice To Proceed The Bac Will Issue To Prospective Bidders Eligibility Forms At The Barangay Hall Of Macolabo Is., Paracale, Cn Upon Payment Of Non Refundable Of P 250.00.00 To The Barangay Treasurer Of Macolabo Is., Paracale, Camarines Norte. The Barangay Macolabo Is., Paracale, Camarines Norte Assumes No Responsibility Whatsoever To Compensate Or Indemnity Bidder For Any Expenses Incurred In The Preparation Of Bids. Kgd. Edito O. Aysara Bac Chairman Barangay Macolabo Is.

Description: Supply And Delivery Of Thermoplastic Paint Materials To Be Used In Lane Markings In Various Roads In Quezon City (dist. Iii & Iv) , Construction Materials And Supplies ,department Of Public Works And Highways - Quezon City 2nd Ed

Description: Enamel, Synthetic, Exterior (a) Under Coating (b) Finishing Paint (v2) As Per Is 2932,enamel, Synth

Details: This Is A Sources Sought Notice Only. This Is Not A Solicitation Or A Request For Quotation (rfq) And No Contract Or Purchase Order Will Be Awarded From This Notice. There Is No Solicitation, Specifications Or Drawings Available At This Time. military Sealift Command (msc) Is Seeking Eligible Businesses For The Regular Overhaul And Dry Docking (roh/dd) Of The Usns Kanawha (t-ao 196) Commencing On Or About 15 March 2025 For A Period Of One Hundred One (101) Calendar Days. The Usns Kanawha Has An Overall Length Of 677 Ft 6 In, A Beam Of 97 Ft 6 In And A Draft Of 36ft. Work Is To Be Performed At The Contractor’s Facility On Or About The Above-mentioned Dates. Area Of Consideration Is East/gulf Coast. The Estimated Issue Date Of The Solicitation Is On Or About 15 August 2024. major Work Items Associated With This Availability Include: General Services For Ship, Clean And Gas Free Tanks, Voids, Weather Deck Non Skid Renewal, Tao187-csi-tank Deck Overhead Preservation, Tank Repairs From Abs Inspections, Cargo Tank Preservation, Tao187-swi-clean And Gas Free Tanks Voids Cofferdams And Spaces (single Hull Only), Ssdg Engine Service - Bergen (80k Hrs) (scsi), Replace Afff Weather Deck Piping - Zone 3, Heavy Oil Equipment Removal (talt 0852), Lifeboat And Davit Service And Inspection (5 Yr) (ccsi), Drydocking And Undocking The Vessel (2.5 Yr) (ccsi), Propeller Maintenance And Hub Replacement, Overhauling Sea Valves (5 Yr) (ccsi), Underwater Hull Cleaning And Painting - Spot Blast (5 Yr) (ccsi), Freeboard Preservation (2.5 Yr) (ccsi), Unrep Station No 6 Steel Repairs, Hp Air Flask Inspection And Preservation (15 Yr) (csi) after Issuance, Solicitation And Supporting Documents Will Be Made Available On The Sam Website Https://www.sam.gov, As Well As The Piee Module. All Small Businesses, Service-disabled Veteran-owned Small Businesses, Certified Hubzone And Certified 8(a) Small Businesses Are Encouraged To Respond. The Government Will Determine Whether A Set-aside Acquisition In Lieu Of Full And Open Competition Is In The Government’s Best Interest. This Office Anticipates Award Of A Contract On Or About 14 January 2025. The Appropriate Naics Code Is 336611. This Is A Market Research Tool Used To Determine The Availability And Adequacy Of Potential Small Business Sources Prior To Determining The Method Of Acquisition And Issuance Of An Award. The Government Is Not Obligated To And Will Not Pay For Any Information Received From Potential Sources As A Result Of This Sources Sought. It Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Package Demonstrating Ability To Provide The Requested Items. This Document Shall Provide At A Minimum The Following: company Profile To Include Number Of Employees, Office Location(s), Duns Number, Cage Code And A Statement Regarding Small Business Designation the Facility Where The Work Will Be Performed partnership, Teaming, Joint-ventures Or Mentor Agreements With Any Large Businesses. submission Of A Capabilities Statement Is Not A Prerequisite To Any Future Offerings But Participation Will Assist The Government In Tailoring The Requirement To Be Consistent With Industry. responses Are Due No Later Than 05 July 2024 At 4:00 Pm Eastern Standard Time. Responses Shall Be Sent Via Email Directly To Marcin.krauze.civ@us.navy.mil. Mailed Submissions Of The Capabilities Package Will Not Be Accepted.

Description: Painting, Tiling And Flooring Work In Municipal Buildings

Details: Description Supply And Delivery Of Construction Materials For The Enhancement Of Multi Purpose Hall (sk Office) At Purok 4 ***item Works*** * Painting Works - 67.84% * Metal Structure Accessories - 32.16%

Details: Description Republic Of The Philippines Barangay 627, Zone 63, District Vi, Manila Bids And Awards Committee Invitation To Bid (itb) The Barangay 627, Zone 63, District Vi, Manila. Through Its Bids And Awards Committee (bac), To Bid For The Here Under Project. Project: 2 Sets Office Table And Chairs, 20 Pcs. Monobloc Chairs And Tables, 2 Pcs. Filing Cabinet, 3 Pcs. Folding Table, 1 Set Public Address System, Gallons Paints, 4 Tincans Traffic Yellow, 24 Cans Tinting Color, Assorted, 4 Gallons Red Oxide, 10 Tincans Brick Red Paint, 1 Set Closed Circuit Television, 50 Boxes Metformin 500mg, 50 Boxes Amlodipine 5mg/10mg, 50 Boxes Ibuprofen 200mg., 50 Boxes Ascorbic Acid With Zinc, 50 Boxes Multivitamins Cap, 50 Boxes Paracetamol Tablet, 50 Boxes Atorvastatin 40mg, 50 Boxes Amlodipine 5mg/10mg, 50 Boxes Losartan 100mg, 2 Units Megaphone, 1 Set Public Address System, 1 Set Closed Circuit Television, 12 Pcs. 2" X 2" X 10' Rough Lumber, 27 24 Lengths 10mm X 6 M Round Steel Bar, 22 Lengths 12mm X 6 M Round Steel Bar, 11 Lengths 16mm X 6 M Round Steel Bar, 2 Kgs. 3" Common Wire Nail, 2 Kgs. 1" Common Wire Nail, 3 Kgs. #16 G.i. Wire, 8 Rolls Pvc Tape Requesting Office/end User: Barangay 627, Zone 63, District Vi, Manila Approved Budget For The Contract (abc): Php 609,523.80 Source Of Fund/year: 20% Bdf 2024

Details: Description Lot 1 - Abaca Stripping Machine Specifications: Portable Spindle Type, Brand New, And Heavy Duty Reinforced Steel Framing, Made Of Mild Steel Bar Pedal Operated Clutch Transmission Type V-belt With Consequential Roller Chain Drive (roller Chain #428; Sprocket No. Of Teeth: Big Drive Approx. 56 Teeth, Small Drive - Approx. 16 Teeth) Or Its Match Lightweight Flywheel (24 Kg. To 30 Kg.) Adjustable Coil Spring Press Detachable Component (engine, Stripping Knife, Adjuster, Spindle, Clutch Pedal, Brake Pedal, Chain, Sprocket) Powered By A 10 Hp To 12 Hp Air-cooled Type Diesel Engine (high Speed) With A Hardwood Spindle Plus One (1) Spare Knife: Made Of Bamboo-steel Covered With Replaceable Stainless-steel Sheet Machine Weight (150 To 170 Kgs.) Dimension - Length:95 To 105 Cm; Width: 75 To 85 Cm; Height: 140 To 150 Cm Acrylic Paint Finish (color: Orange) 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Capable Of Producing S-2 Quality Fibers 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao With Reflectorized Sticker Printed With Dar Logo And The Words “provincial Agrarian Reform Office Of Agusan Del Norte - Crfps Project” Certified By Philippine Fiber Industries Development Authority (philfida) With Standard Tools (wrenches, Screwdrivers - Crosshead And Flathead, And Other Tools Applicable For The Machine) With Operating Manual Lot 2 - Soil Auger Brand New Engine: Forced, Aircooled, 2-stroke, 50-65 Cc Fuel: Gasoline And Oil Mixture (25:1) Starting System: Electronic Ignition Engine Speed: 8,000 Rpm Maximum Power: 1.9 To 2.2 Kw Auger Bit Speed: 100-280 Rpm Auger Bit Diameter Of 50 Mm To 300 Mm (at Least 3 Bits) Auger Bit Height: 70 To 90 Cm Net Weight: 10 Kg Maximum With Extension: Rod/bar Safety: Bit Lock 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 3 - Water Pump (coupled) Specifications: Type: Self-priming Centrifugal Pump Set (4"x4") Displacement: 406 Cc Maximum Bore: 80 To 90 Mm Stroke: 70 To 80 Mm Engine Speed: 3600 Rpm Minimum Horsepower: 10-12 Hp (water Cooled Diesel Engine) Delivery Volume Of 1,500 To 1,700 L/min Dimension: L=640 To 650 Mm; W=470 To 490 Mm; H=600 To 610 Mm Gross Weight: 60-80 Kg With At Least 100-meter Duct Hose (dia. 4") - Polyethylene Flex High-pressure Hose With At Least 6 Meters Suction Hose (dia. 4") - Rubberized With Foot Valve, Hose Adoptor With Steel Frame For Easy Handling 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 4 - Floating Tiller (mud Boat) Specifications: Brand New; 60-60 Chain Combination Transmission 10 Hp Water-cooled Diesel Engine (minimum) Metal Float, Elliptical, Hermetically-sealed Air Tank, Made Of Gauge 18 Plain Metal Sheet (minimum) Reinforced With 3 Metal Strips Or Gauge 16 Plain Metal Sheet (minimum) With Angular Bar Backing Plate Epoxy Painted Fuel Consumption: 4 Liters Per Hour Maximum V-pulley-v-belt Transmission Steel Cage Wheel Made Of Mild Steel Main Clutch Lever Walking Type Floating Tiller Minimum Dimensions: Length: 2820 Mm, Width: 1080 Mm, Height: 970 Mm Field Capacity: 0.4 Has. Per Hour Minimum Field Efficiency: 85 % Minimum 1 Year Warranty Period On Parts And Services After Sales Service Available Within Caraga 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 5 - Multi-function Tiller/soil Cultivator With Implements Specifications: General: Machine Dimension (minimum) : 190 X 80 X 100 Cm; Net Weight : 75-80 Kg.; Tilling Scope: 80-120 Cm; Tilling Depth : 15-30 Cm Engine: Type: Chv/air Cooled Gasoline Engine; Maximum Power : 7 Hp (5.2 Kw); Speed: 3600-3800 Rpm; Fuel Tank Capacity: 3-4 L; Oil Tank Capacity: 0.6 - 1.0 L; Starting System: Recoil Transmission: Driving Mode: 2 Pcs. B Type Grove V-belts; Gear Shifting: 3 Speed Forward, 1 Reverse; Gear Oil Capacity: 1.0 - 1.2 L Implements: Deep Plow (for Initial Ground Breaking), Rotovator (for Land Cultivation, Mixes Soil), Paddle Wheel + Ditcher (for Plot/bed Making) - All Made Of Mild Steel. Note: Implements Sizes Must Conform With The Specified Tilling Scope And Depth. 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 6 - Decorticating Machine (coconut) Specifications: Mobile Heavy Duty Manual Fed Engine: 10 - 12 Hp Diesel Reinforced Steel Framing: Made Of Mild Steel Capacity Input: 700 Kg/hr. Minimum (single Pass) Decorticating Efficiency: 98% Minimum Fuel Consumption: 2 Liters Per Hour Maximum Minimum Dimension (lxwxh) In Meters: 2x1.4x1.3 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result With Reflectorized Sticker Printed With Dar Logo And The Words “provincial Agrarian Reform Office Of Agusan Del Norte - Crfps Project” Lot 7 - Knapsack Sprayer Specifications: Stainless Steel Body Manual Capacity: 16 Liters 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 8 - Grass Cutter Specifications: Engine: Ai-cooled, 2 Stroke Rated Power: 1.8 Hp/7000 Rpm Minimum Displacement: 40.2 Cc Idle Speed: 2800-3200 Rpm Drive System: Auto Centrifugal Clutch, Spiral Bevel Gear Rated Cutter Edge Rotation Speed: 5,100 Rpm Minimum Standard Blade: 255 Mm Carburator: Float Type Fuel Tank Capacity: 1 L Maximum Fuel: Gasoline/ 2 Cycle Oil Mixture (25:1) Net Weight: 9 Kg Maximum Shaft Lenght:150-170 Cm Minimum Dimensions (lxwxh):1670x280x 125 Mm 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine With Operating Manual Lot 9 - Grinder/pulverizer Specifications: Stationary Heavy Duty Reinforced Steel Framing Made Of Mild Steel Electric Motor Rated Power: 2 To 3 Hp Input Capacity: 70 Kg./hr. Minimum Grinding Recovery: 95% Minimum Purity: 98% Minimum Grinding Loss: 1% Maximum Noise Level: 95 Db (a) Maximum Provide At Least One (1) Food-grade Collecting Container 1 Year Warranty Period On Parts And Services After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo Delivery: Onsite/arbo Office With Standard Tools (wrenches, Screwdrivers, And Other Tools Applicable For The Machine) With Operating Manual Machine Must Conform To The Philippine Agricultural Engineering Standard (paes) With Agricultural Machinery Testing And Evaluation Center (amtec) Test Result Lot 10 - Weighing Scale Specifications: Brand New Heavy Duty Mechanical, All Steel Flatform Capacity: 500 Kg Graduation: 200 G Maximum Easy Zero Balancing Single Beam-type Flatform Legal For Trade Scale Rust-free Brass Roller Base Is Made Of Cast Iron Set Of Cast Iron Counter Poise Included Reinforced Steel Structure Flatform Size 450 Mm X 670 Mm Minimum 1 Year Warranty Period On Parts And Services Delivery: Onsite/arbo Office After Sales Service Available Within Mindanao 1 Day Training On O&m, Testing And Field Demo With Operating Manual

Details: Description Date Of Bidding: May 30, 2025 Place Of Bidding: Brgy. Camiros,anilao,iloilo Multi-purpose Hall Time Of Bidding : 9:00 Am =materials= Reinf. Concrete Works 72 Bags Cement 13 Cu.m. Sand & Gravel Mixed 118 Pcs Rsb - 10mmøx6m 8 Pcs Ordinary Plywood - 1/4x4x8" 80 Pcs Good Lumber 2"x2"x8" 3 Kgs Cw Nails 1/2" 4 Kgs Cw Nails 1 1/2" 5 Kgs Cw Nails 3" 5 Pcs Hacksaw Blade 10 Kgs Tie Wire # 16 Steel Works: 12 Pcs G.i. Pipe - 2 1/2" (s40) 24 Units Light Shade W/guard And Mogul Socket 6 Kgs Welding Rod Electrical Works: 1250 Meters Duplex Wire #6 50 Meters 2.0mm2thhn Stranded Copper Wire 24 Pcs Led Lights 12 Watts 8 Pcs Electrical Tape (big) 24 Pcs Secondary Rack W/ Spool Insulator Painting Works: 10 Liters Metal Primer 10 Liters Enamel Paint 10 Liters Flat Latex - White 20 Liters Semi Gloss Latex Paint 6 Pcs Baby Roller 6 Pcs Paint Brush 2"

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services