Paint Tenders

Details: This Is Not A Solicitation For Offers Sources Sought/request For Information Only the Usda, Agricultural Research Service (government) Has A Need For The Full Range Of Operation And Maintenance Support Services At Its Us Vegetable Laboratory In Charleston, South Carolina. Services Include But Are Not Limited To: Routine And Preventative Maintenance, Custodial Needs, Grounds Maintenance, Plumbing, Woodwork, Fire Extinguisher Inspection, Painting, Electrical, And Hvac. Certain Services Will Require Attention 24 Hours Per Day, 7 Days A Week, Including Federal Holidays. this Is A Sources Sought/request For Information (rfi) Issued By The Government That Will Be Used As Market Research To Gather Information On Industry Processes And Procedures And To Determine How Industry Conducts Business. In Addition, The Government Requests Industry Review And Comment On The Attached Performance Work Statement (pws). Comments Will Be Used For Possible Improvement To The Pws To Closer Align With Industry Standards And Provide The Best Services To The Government. this Rfi Is For Informational And Acquisition Planning Purposes Only. This Is Not A Request For Proposal (rfp), Nor A Request For Quote (rfq). No Submissions Will Be Accepted As Official Offers For A Contract. The Government Will Not Reimburse Respondents For Any Expenses Associated With This Rfi. Any Responses Received To This Notice Will Not Be Returned To The Respondent(s) And This Is Not An Opportunity For Vendor Questions Regarding The Upcoming Requirement. by Responding To This Rfi, Respondents Are Deemed To Accept And Agree The Government Reserves The Right, In Its Sole Discretion, Without Liability, To Utilize Any Or All Of The Rfi Responses In Its Planning Efforts. The Government Reserves The Right To Retain And Utilize All The Materials, Information, Ideas, And Suggestions Submitted In Response To This Rfi. This Rfi Will Not Be Construed In Any Manner To Implement Any Of The Actions Contemplated Herein, Nor To Serve As The Basis For Any Claim Whatsoever For Reimbursement Of Costs For Efforts Expended In Preparing A Response To The Rfi. this Sources Sought/rfi Posting And The Pws (without Attachments) Are The Only Documents Available At This Time. This Rfi Does Not Commit The Government To Issue A Solicitation; However, A Solicitation Is Anticipated. Any Notices, Solicitation Information, Or Requirements Will Be Posted To Www.sam.gov Using This Notice Id Of 12405b25q0062. the Submission Of An Rfi Response Is Not Required To Participate In Any Potential Future Solicitation. interested Parties Should Submit Responses To The Contracting Officer At Amanda.somerville@usda.gov No Later Than January 30, 2025, 2:00pm Mtn.

Details: The U.s. Army Corps Of Engineers, Japan Engineer District Is Providing A Pre-solicitation Notice Pursuant To Far 5.204 For An Upcoming Solicitation. Please Review All Information In This Notice And Follow The Submittal Requirements Detailed Within If Interested. project Information project Title: Conversion Of Building To Secure Space, Okinawa, Japan proposed Solicitation Number: W912hv25r0002 appropriation Type. Fy2025 Operation & Maintenance, Marine Corps (ommc) project Magnitude: Between $5,000,000 And $10,000,000 (far 36.204) product Service Code: Y1az – Construction Of Other Administrative Facilities And Service Buildings project Naics: 236220, Commercial And Institutional Building Construction Was Determined To Be The Most Applicable To This Requirement. sources Sought Market Survey Was Previously Conducted In W912hv-24-z-0021. this Industry Comprises Establishments Primarily Responsible For The Construction (including New Work, Additions, Alterations, Maintenance, And Repairs) Of Commercial And Institutional Buildings And Related Structures, Such As Stadiums, Grain Elevators, And Indoor Swimming Facilities. This Industry Includes Establishments Responsible For The On-site Assembly Of Modular Or Prefabricated Commercial And Institutional Buildings. Included In This Industry Are Commercial And Institutional Building General Contractors, Commercial And Institutional Building For-sale Builders, Commercial And Institutional Building Design-build Firms, And Commercial And Institutional Building Project Construction Management Firms. project Description: this Project Will Provide Conversion Of Approximately 6,116 Square Feet Of A Single Level Above Ground Building To Meet Secure Space Specifications. Work Includes All Labor, Transportation, Materials, Equipment, And Supervision Necessary To Accomplish Various Construction, Demolition, Repairs, Alterations, And Associated Incidental Environmental Work. (including But Not Limited To Asbestos, Lead-based Paint, Mold, Pcbs, Site Contamination, Etc.) To This U.s. Government Facility Located Within Japan, By Means Of This Design-bid-build (d-b-b) Contract. this Contract Is For The Construction Portion Only; Construction Security Administration Will Be Provided Under A Separate Contract. solicitation Information: procurement Method: The Government Intends To Issue A Request For Proposal (rfp) Solicitation Utilizing The Lowest Price Technically Acceptable Source Selection Process Outlined In Far 15.101-2 And Award A Firm-fixed-price Construction Contract Because Of The Solicitation. this Procurement Will Be Issued In Accordance With Far 4.403 And Dfars Pgi 204.403 And Comply With Dod 5220-22-m - National Industrial Security Program Operating Manual (nispom), Dod 5220.22-r - Industrial Security Regulation, And Icd-705 And Its “technical Specifications For Construction And Management Of Sensitive Compartmented Information Facilities.” offeror’s Must Have A Valid U.s. Facility Clearance Level (fcl) Of Secret To Receive And Respond To The Upcoming Solicitation. This Project Includes Contract Plans, Specifications, And Drawings That Are Controlled Unclassified Information (cui) Which Can Only Be Released To Offerors Who Are U.s. Citizens. The Government Anticipates The Solicitation Being Available In Mid-november 2024. A Site Visit Is Tentatively Planned For 04 December 2024 On Okinawa, Japan. The Contracting Officer Is Currently Projecting Proposals Due In Late April 2025. if You Have The Proper Fcl And Are Interested In This Project, Please Submit The Following To Jack.t.letscher@usace.army.mil And Norman.roldan@usace.army.mil: your Request Must Be Received No Later Than 5:00 Pm, 1 November 2024, Eastern Standard Time. company Name, Address, And Point Of Contact commercial And Government Entity (cage) Code: The Cage Code Will Be Used To Validate Your Company’s Dod Secret Facility Clearance Level (fcl). unique Entity Identifier (uei) Registered To Do Business With The Federal Government In Sam.gov completed And Signed “attachment A – Controlled Unclassified Information Non-disclosure Agreement” For Everyone That Will Have Access To The Cui Solicitation Documents. completed And Signed “attachment B - Instruction For Handling And Dissemination Of Controlled Unclassified Information” For Every Person That Will Have Access To The Cui Solicitation Documents. email Address(es) That Correspondence Related To This Project Can Be Sent. This Email Address Shall Only Be Accessible By U.s. Citizens Who (1) Have Executed The Attachment A And B Above And (2) Need To View The Cui To Propose Or Perform On The Contract. no Solicitation Documents Will Be Released Until All Information Above Has Been Received By The Government And Fcl Has Been Verified. Your Request Shall Be Received No Later Than 5:00 Pm, 1 November 2024, Eastern Standard Time. If Verified To Have The Proper Secret Fcl, The Government Will Send Solicitation Documents Once Available Via Dod Safe Encrypted File Exchange To The Provided Email Address. all Interested Companies Shall Be Actively Registered In The System For Award Management (sam) Database To Be Eligible For Award Of Government Contracts. Information On Registration And Annual Confirmation Requirements May Be Found At Http://www.sam.gov.

Details: **rfp Amendment 0004: Extends Response Date To 10 January 2025 13:00 Pacific Standard Time And Provide Sf30(s) Relating To Rfp Amendment 01-04 As Attachments. Rfp Amendment 0003: Extends Response Date To 03 January 2025 13:00 Pacific Standard Time. Rfp Amendment 0002: Provides Response To Ppi 07. Rfp Amendment 0001: Provide Responses To Ppi 01-06 And Provides Revision 1 Of The Pws As Attachments. Navfac Nw, In Support Of The Environmental Business Line (ev), Is Requesting Proposals From Potential And Eligible Contractors To Provide Navy Installations And Navy Sites Primarily Within The Greater Puget Sound Area Environmental Services To Include, But Not Limited To The Following:? laboratory Testing? field Sampling, Testing, Surveys, And Investigations? shipping (containers And Coolers)? development/modification Of Sampling And Analysis Plans (saps), Standard Operating Procedures (sops), Quality Assurance Plans (qaps), And Project Specific Documentation? procure And Manage Testing/sampling Equipment And Supplies? drinking Water Testing? wastewater Testing? storm Water Testing? asbestos And Lead Facility Inspections? air Emission Testing? insulating Oil Testing? soil Testing Technical Work Description - Typical Work For This Contract Will Be:? laboratory Testing. Provide Testing Supplies (containers, Coolers, Blue Ice, Packing Materials, Preservative, Etc.) And Services To Analyze Environmental And Other Samples, Including But Not Limited To, The Following Regulatory Programs: Drinking Water, Wastewater, Stormwater, Groundwater, National Pollutant Discharge Elimination System, Industrial Wastewater, Hazardous/solid Waste, Air Testing, Cercla (remedial ? field Sampling And Field Testing. The Contractor Shall Furnish All Labor, Supervision, Materials, Supplies, Travel, Consumables, And Equipment To Conduct Field Sampling And Testing Service Calls. Perform Sampling In Accordance With Relevant Federal, State And Local Regulations, Sampling And Analysis Plan(s), And Customer Guidance. Samples May Be Collected By The Navy And Delivered To A Laboratory Or The Contractor May Be Tasked With Sample Collection.? database Development Support. Develop, Design, And/or Modify Databases, In Ms Access, Or Other Database/programming Language, For Navfac Northwest And Their Customers To Facilitate The Import Of Laboratory Data, To Permit The Analysis, Query And Reporting Of That Data (including Temporal Queries), And To Provide Export Of That Data Into Multiple Formats.? develop/modification Of Sampling And Analysis Plans. Develop Sampling And Analysis Plans (saps) And/or A Standard Operating Procedure (sop) That Covers All Aspects Of The Field Sampling Activities.? procure Equipment And Supplies. Procure Equipment And Supplies Associated With Field Sampling As Specified By The Government. For Example, Equipment May Include Automatic Storm Water Samplers.? air Emission Source Testing. Air Emission Monitoring And Testing Performed In Accordance With Requirements Set Forth By Federal, State, And Local Rules And Permits. Testing And Monitoring May Be Performed For The Following Sources, But Not Limited To: Boilers, Generators, Storage Tanks, Fugitive Emissions From Building Enclosures, Electroplating/anodizing Tanks, Blast Booths, Paint Booths, And Powder Coating Booths. ? project-specific Documentation. Develop And Provide Documentation Related To A Sampling And/or Laboratory Service Such As: Security Access Requirements, Schedules, Project Plans, Quality Control Plans, Data Validation, Operations/maintenance Manuals, Final Or Interim Project Reports, Health And Safety Plans, Underground Storage Tank Closure Documentation, And Well Closure Documentation.geographic Location: The Geographic Location Of Your Company?s Primary Office Must Be Within A Three-hour (one-way) Ground Travel Distance From Naval Base Kitsap Bangor. This Criterion Is To Facilitate Efficient On-site Presence To Naval Facilities In The Greater Puget Sound Area To Conduct Activities Such As Sample Collection, Sample Pick-up, Equipment Delivery/pick-up, And On-site Meetings. The Laboratory, If A Separate Entity From The Primary Contractor, Does Not Need To Be In The 3-hour Distance But Does Need To Be Located In Washington Due To Certification Requirements.the Majority Of The Work For This Planned Solicitation Will Be Performed In The Greater Pacific Northwest Area To Include The Facilities Listed Below:? Naval Base Kitsap, Bremerton, Wa? Naval Base Kitsap, Keyport, Wa? Naval Base Kitsap, Bangor, Wa? Naval Station Everett, Wa? Naval Air Station Whidbey Island, Wa? Naval Magazine Indian Island, Wa ? Naval Radio Station Jim Creek, Wa? Naval Base Kitsap Manchester? Naval Base Kitsap Jackson Parkit Is Anticipated That The Preponderance Of Work Under This Solicitation Will Be Performed In The Greater Pacific Northwest Area, However; Project May Occur At Other Facilities Manage By Navy Region Northwest (nrnw) Throughout Washington, Oregon, Alaska, Idaho, Montana, Wyoming, North Dakota, South Dakota, Nebraska, Minnesota, And Iowa. All Work Required Herein Shall Be Performed In Accordance With All Applicable Federal, State, And Local Laws And Regulations.please See Attached Rfp For Further Details.

Details: The University Of Edinburgh Accommodation, Catering & Events (ace) Is Looking To Appoint Competent Suppliers To Deliver Property Maintenance And Compliance Testing Services To Our Short Lease Properties. These Short Lease Properties Are Owned By Private Landlords And Rented To University Students. Ace Provide A Full Property Management Service To These Properties. Ace Currently Manage A Portfolio Of 78 Short Lease Properties On Behalf Of A Variety Of Landlords, Although This Figure Is Subject To Change. To Support The Maintenance And Legal Compliance Requirements Of This Portfolio, We Seek To Appoint Suppliers To Deliver Works/services In The Following Two Areas, Firstly Property Maintenance And Secondly Legal Compliance And Certification. Interest From Suppliers Who Can Cover One Or Both Requirements Are Welcome. At This Point In Time, The Division Of Work Has Still To Be Determined. Within The Requirement For Property Maintenance, It Is Expected A Multi Trade Supplier, Including As A Minimum Handyman, Joinery, Plumbing (routine And Emergency Jobs), Electrical, Gas And Heating Engineer, Glazier, Plasterer, Locksmith, Roofer And Painter Will Be Called Upon To Attend To The University’s Maintenance Requirements, As And When Required. This Will Include Planned And Reactive Maintenance/repairs And Also Hmo Remedial Work, The Supplier Is Therefore Required To Have Familiarity With Hmo Requirements. Often Work May Be Required To Be Completed Within A 24-hour Period, As A Result Of The Tight Turnaround In The Properties. This Will Also Include Emergency Repairs, Which Require A Response Within A 2-hour Period. We Require All Trades To Be Available For Routine Call Outs And Out Of Hours/emergency Call Outs 365 Days A Year 24 Hours A Day. Within The Requirement For Legal Compliance And Certification, Ace Are Looking To Appoint A Single Supplier To Provide Annual Safety Checks Required To Meet Our Legal And Regulatory Standards. These Include But Are Not Restricted To The Following: - Landlords Gas Safety Checks - Portable Appliance Testing - Electrical Installation Condition Reports - Emergency Light Testing - All L8 Related Standards - Fire Alarm Maintenance - Fire Risk Assessment - Fire Equipment Maintenance - Energy Performance Certificate - Asbestos Surveys - Boiler Service. The University Of Edinburgh Plans To Employ A Variety Of Market Engagement Methods Such As Questionnaires As Part Of This Market Research. Your Participation And Submission Of Information Is Voluntary, And Will Not Affect Your Ability To Bid For The Requirement Once Advertised, Nor Will It Be Considered As Part Of Any Evaluation. No Supplier Will Be Disadvantaged By Not Wishing To Participate In Any Market Research Requests. If You Wish To Participate In Any Market Engagement We May Carry Out, Please Email Maria.dick@ed.ac.uk Confirming Your Contact Details. Cpv: 50000000, 50000000.

Details: This Is A Sources Sought Synopsis For Little Rock Afb Base Pavements Idiq. Please Note That This Sources Sought Does Not In Any Way Obligate The Government To Award A Subsequent Contract. This Sources Sought Is For Market Research And Planning Purposes To Determine If Responsible Sources Exist And To Assist In Determining If This Effort Can Be Competitive. experience Required Is As Follows: - The Contractor And/or Subcontractor Shall Have A Minimum Of 5 Years’ Experience With Airfield Maintenance/repair And Successfully Completing Work Types Listed Below On An Active Airfield. - The Contractor And/or Subcontractor Shall Have A Minimum Of 5 Years’ Experience In The Use Of Chemical Detergent, Avion 50 (chemteck Incorporated), Or Equal For Rubber Removal From Airfield Pavements. - The Contractor And/or Subcontractor Shall Have A Minimum Of 5 Years’ Experience In The Use Of Ultra-high Pressure, Low Volume Water Blasting Equipment For Paint Removal From Airfield Pavements. - The Contractor And/or Subcontractor Shall Have A Minimum Of 5 Years’ Experience In New And Existing Layout, Preparation, And Painting Of Airfields And Roadways. the Principal Features Of The Work For Airfield Pavements Shall Consist Of But Are Not Limited To The Following: 1. Temporary And Permanent Airfield Markings. 2. Install Erosion Control Measures. 3. Seal Joints. 4. Spall Repair. 5. Bitumen Rejuvenation. 6. Random Crack Repair. 7. Rubber Removal 8. Friction Testing 9. Remove And Disposal Of Concrete Pavements. 10. Remove, Crush, And Stockpile Concrete Pavements. 11. Asphalt Cold Milling And Disposal Of Milled Material. 12. Asphalt Cold Milling And Stockpile Milled Material 13. Placing, Grading, And Compacting Government Provided Crushed Concrete And Asphalt Millings. 14. Construction Of New Concrete Pavements. 15. Groove The Runway Surface. 16. Install New Tie-downs In New Or Existing Pavement. 17. Placing Hot Mix Asphalt. 18. Install Subdrains. 19. Grading Airfield Areas To Meet Airfield Criteria 20. Hydroseed And Or Sod Disturbed Areas. 21. Providing Temporary Airfield Lighting During Construction. 22. All Concrete Repairs Require Class F Fly Ash In Mix Design. the Principal Features Of The Work For Civil Works Shall Consist Of But Are Not Limited To The Following: 1. Geographic Information Survey (gis) And As-built Drawings 2. Storm Water Pollution Prevention Plan (swppp) Implementation To Little Rock Afb And Arkansas Department Of Environmental Quality (adeq) Standards 3. Demolition Of Concrete, Asphalt And Various Structures 4. Concrete Work 5. Architectural Barriers Act (aba) And The Americans With Disabilities Act (ada) Ramps, Handrails, And Site Work 6. Site Work: Excavation To Grade, Grading, Compacting, Various Materials, Clearing & Grubbing, Selective Tree Cutting, And Demolition. 7. Landscape Establishment: Topsoil, Trees, Sodding, Seeding. 8. Concrete Joint Sealant 9. Asphalt Maintenance: Crack Sealant, Rejuvenation, Slurry Seal 10. Bollard Installation- Various Types Including Lighted 11. Valve, Meter, Hydrants Adjustments 12. Arkansas Highway And Transportation Department (ahtd) Standards Roadway Construction 13. Asphalt Construction 14. Asphalt Cold Milling 15. Roadway Maintenance Of Traffic And Traffic Control Devices 16. Lrafb, Ahtd, And Federal Highway Administration (fhwa) Pavement Markings And Signage 17. Culvert Installation, Modifications, And Safety End Sections 18. Drop Inlet, Curb Inlet, Junction Box Repair, Adjustments, Installation And Modifications 19. Underdrain Installation 20. Concrete Steps And Sidewalks 21. Traffic Detection Loop Installation And Repair 22. All Exterior Concrete Repairs Require Class F Fly Ash In Mix Design. performance Location: Little Rock Afb, Ar And Remote Locations Blackjack Drop Zone Near Romance, Ar; All American Landing Zone Camp Robinson, Ar; And Communication Site Near Cabot, Ar. period Of Performance (pop): The Period Of Performance Is Expected To Be Either: one (1) Twelve (12) Month Base Contract Period With Five (5) Twelve (12) Month Option Periods Or one (1) Twenty-four (24) Month Base Contract Period With Four (4) Twelve (12) Month Option Periods naics Codes: The Base Pavements Idiq Will Be Within The Following North American Industry Classification System (naics) Code Sectors And Subsectors: sector/subsector Size Standard sector 23 – Construction subsector 237 – Heavy And Civil Engineering Construction $39.5m 237310 – Highway, Street, And Bridge Construction $39.5m this Is A Sources Sought Synopsis Only And Not A Request For Proposal (rfp). No Solicitation Is Being Issued At This Time And This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. Contractors Are Highly Encouraged To Submit A Package Containing The Information Below To The Government As A Result Of This Sources Sought Notice. Responses Will Not Be Returned. No Entitlement To Payment Of Any Costs To The Government Will Arise As A Result Of Contractor Submission Of Responses Or The Government’s Use Of Such Information. Information Requested Is For Sources That Have The Capability And Financial Means To Handle An Indefinite-delivery Indefinite-quantity For Airfield Pavements/civil Works That Allows Civil Engineering To Have Projects Accomplished At An Accelerated Pace Without Competition Utilizing A Pre-priced Contract With Line Items. information Requested Outlined In The Below Paragraphs Is To Be Emailed To Ms. Jennifer Bradford At Jennifer.bradford.2@us.af.mil, Sra Lucas Navas At Lucas.navas@us.af.mil, Ms. Rachel Italiano At Rachel.italiano.1@us.af.mil, And Mr. Arthur Brown At Arthur.brown.17@us.af.mil, No Later Than 7 January 2025, 1:00 P.m. Cst. in Accordance With Far 52.204-7 – System For Award Management, Contractors Must Be Registered In The System For Award Management (sam) Database Via Https://sam.gov. Prime Contractors Must Be Us-owned Entities Who Intend To Submit A Package For This Sources Sought. 1. Company Information: -name -business Address -point Of Contact -telephone Number -e-mail Address -uei Number / Cage Code Number -business Size In Relation To The Naics Code Size Standard Assigned To This Acquisition -number Of Employees -number Of Years In Business, Etc. -a Positive Statement Of Your Intention To Submit A Proposal For This Solicitation As A Prime Contractor. 2. Socio-economic Status (e.g., Small Business, Hubzone, 8(a), Service Disabled Veteran Owned Small Business (sdvosb)), And Any Associated Documents Of Such Status, Certification Or Approvals. 3. Prime Contractors Shall Be Capable Of Securing Bonding Up To The Amount Of The Task Order (payment, Performance, Etc…). Provide Your Bonding Capacity Per Contract And Aggregate. 4. Provide A Point Of Contact To Assist In Market Research To Determine Solicitation Set-aside, If Any. 5. Demonstrate Your Ability To Execute Multiple Task Orders Concurrently 6. Summarize Projects That Show Your Capabilities And Past Performance. The List Of Relevant Projects May Include Names Of Project Team Members And Firm, Point Of Contact (contracting Officer And Quality Assurance Evaluator/inspector) With Titles, Phone Numbers, Project Scope, Type Of Contract, And Percentage Of Work Completed As The Prime Contractor. all Of The Above Must Be Submitted In Sufficient Detail For A Decision To Be Made On The Availability Of Small Business Concerns.

Details: Description A.contract Id : Antipolo-22january2025-19 B.name Of Project : Improvement Of Day Care Center, Multi-purpose Covered Court And Lingap Kabataan Center/ Construction Of Covered Pathwalk At Brgy. San Juan And Brgy. Inarawan, Antipolo City (2025 - Package 05) A.improvement Of Day Care Center At Inalsan Child Development Center, Brgy. San Juan, Antipolo City B.construction Of Covered Pathwalk At Sapinit Elementary School, Brgy. San Juan, Antipolo City C.additional Improvement Of Multi-purpose Covered Court At Sitio Inalsan, Brgy. San Juan, Antipolo City D.improvement Of Lingap Kabataan Center At Sitio Cabading, Brgy. Inarawan, Antipolo City C.location : A.b.&c.brgy. San Juan, Antipolo City D.brgy. Inarawan, Antipolo City D.brief Description : A. Improvement Of Day Care Center B.construction Of Covered Pathwalk C.improvement Of Multi-purpose Covered Court D.improvement Of Lingap Kabataan Center E.major Item Of Works : A. Electrical Works; Tile Works; Repainting Works B.structural/concrete Works; Steel Works; Painting Works C. Painting Works D. Repainting Works; Electrical Works; Plumbing Works F.approved Budget For The Contract : Php 2,735,006.08 G.duration : 60 Cd. Republic Of The Philippines City Government Of Antipolo Invitation To Bid / Request For Expression Of Interest The City Government Of Antipolo Through The Bids And Awards Committee (bac), Invites Contractors Duly Registered With The Philippines Contractors Accreditation Board (pcab) To Bid For The Following Project/s Chargeable To Their Respective Funds. The Proponent – Contractor Is To Undertake The Proposed Project/s On A Turnkey Basis. The Bac Will Conduct The Procurement Process In Accordance With The Revised Irr Of R.a. 9184. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening Of Bid. To Bid For The Aforementioned Contract, A Contractor Must Purchase Bid Documents And Must Meet The Following Major Criteria (a) Filipino Citizen Or 75% Filipino – Owned Partnership, Corporation, Cooperative, Or Joint Venture, (b) With Pcab License Applicable To The Type, Kinds Of Project, Respective Size Ranges And Cost Of This Contract, (c) Completion Of A Similar Contract Costing At Least 50% Of Abc Within A Period Of L0 Years, And (d) Net Financial Contracting Capacity At Least Equal To Abc. The Bac Will Use Non-discretionary Pass / Fail Criteria In The Eligibility Check And Preliminary Examination Of Bids. Interested Contractors Shall Manually Submit Their Bids, Together With Their Duly Accomplished Bid Documents (sealed In Envelopes) Addressed To The Chairman Of The Antipolo City Bids & Awards Committee (acbac) And Shall Be Guided By Hereunder Listed Schedules Of Activities And Locations; Issuance Of Bid Documents: January 03 - 22, 2025 @ 10:00 A.m.at Office Of The City Engineer, City Government Of Antipolo, Brgy. San Roque, Antipolo City Pre-bid Conference: January 10, 2025 @ 1:00 P.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City Submission Of Bids: January 22, 2025 Not Later Than 11:00 A.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City Opening Of Bids: January 22, 2025 @ 1:00 P.m. At 2nd Floor, Antipolo City Hall Building (main), M.l. Quezon, Cor. Carigma St. Brgy. San Roque, Antipolo City And Upon Payment Of Refundable Fee For The Bidding Documents, Pursuant To The Guidelines Issued By The Gppb, Per Schedule Of Values And/or Project Cost Payable To This City’s Treasurer’s Office. Partial Set Of The Subject Bid Documents May Also Be Downloaded Free Of Charge From The Website Of The Phil-geps And The Website Of This City While Its Completion May Be Purchased By Prospective Bidders As Stated. Bid Security Must Be In The Form Of A) Cash Or Cashier’s/manager’s Check, Issued By A Universal Or Commercial Bank, B) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Foreign Bank, C) Surety Bond Callable On Upon Demand Issued By A Surety Or Insurance Company Duly Certified By A Surety Or Insurance Company Duly Certified By The Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security, D) Bid Securing Declaration, And E) Any Combination Of Identified Forms. The City Government Of Antipolo Reserves The Right To Reject Any Or All Bids, To Declare A Failure Of Bidding, Waive Any Minor Defect Therein, And Accept The Offer Most Advantageous To The Government And Assumes No Responsibility Whatsoever To Compensate Or Indemnify The Bidders For Any Expenses Incurred In The Preparation Of The Bid. For Further Information Prospective And Qualified Bidders May Inquire At The Office Of The Bac Chairman, Through Its Secretariat At City Government Of Antipolo, Brgy. San Roque, Antipolo City. (sgd) Atty. Cedrick Justice U. Capiral Chairman Of The Bac

Description: Contract notice – general guideline, standard rule open procedure (construction work) New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof At the ... MoreNew building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof New building for the Florenberg school in Pilgerzell, metalwork work on a glass roof The construction project involves a new primary school building, as a special two-story building with basement sections, which is integrated into a hillside location. Overall, the property is divided into 4 building sections, which are connected to one another via corridors and open staircases. The building is being constructed as a solid construction in reinforced concrete across all floors. A vertical, ventilated wooden cladding with integrated, generously sized wooden window bands determines the external appearance. The roof is being designed as a warm roof and will have a gravel covering and will be covered with a PV system. Interior walls will be painted white or, depending on the area, covered with wooden cladding to match the external appearance. Suspended ceilings will be closed with a white grid ceiling or light wood wool lightweight panels. A steel-constructed arcade will be built on the west side. The school will be built on the area of the currently used schoolyard next to the existing school building, which will be demolished at a later date. An interim area for the schoolyard will be set up to the north for the construction period. After the new building has been constructed, the existing building will be demolished so that the built density, including the height, is significantly reduced. The demolition area will be landscaped and used as a playground area. The adjacent gymnasium will be retained. The work by the AN involves the delivery and installation of a glass roof construction with external sun protection system. The following service components are included in the scope of services: - 1 piece (approx. 42 m2) glass roof with external sun protection system: width x length = 5.02 x 7.96 m - 2 pieces smoke extraction wings with chain drive 1.32 x 2.39 - 30 m all-round thermally insulated component connection

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 2 Cy 2024 , Intend To Apply The Sum Of P 3,381,096.77 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City With Project No. Cb(b)-24-149 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Improvement Of Stairs At Buhanginan Hills (near Girlscout Headquarters), Buhanginan Hills, Brgy. Pala-o, Iligan City General Requirements •permits And Clearances •facilities For The Engineers •installation Of Project Billboard- 2 Sets •occupational Safety And Health Program •mobilization And Demobilization Removal Of Obstructions •clearing/removal Of Obstruction •uprooting/cutting Of Trees Gravel Fill •100 Mm Thk. Gravel Base For Footings And Zocalo •75 Mm Thk. Gravel Base For Bench, Footing And Plantbox Flooring •50 Mm Thk . Gravel Base For Stair Steps Electrical Works •laying Of The Underground Or Overhead Power Cables Connecting To The Main Power Supply •installation Of Protection System And Outdoor Electrical'panel (nema Enclosure W/ 15at Circuit Breaker) •erection Of Modem-type Outdoor Lamp Posts And Bollards (including Foundations And Anchor Bolts) •complete Wiring Of The Luminaire To The Electrical Supply •installation Of Outdoor Junction Boxes For Protection And Organization •underground Cable Burial Or Concrete-embedding Of Cable For Cable Routing •proper Grounding Of The Lamp Posts,electrical Panel, And Other Metal Parts For Safety •concrete Pouring For Footings, Zocalo,columns, 75 Mm Thk. Concrete Flooring For Plantbox , 50 Mm Thk. Concrete Topping, Bench Footing And Bench, 100 Mm Thk. Concrete Flooring For Landing And Stair Steps With Pebble Topping. •installation Of Formworks And Falseworks For Columns, Bench, Concrete Topping, And Stairs (steps And Landing) •removal Of Formworks And Falseworks Steel Reinforcements And Steel Works •installation Of 12 Mm Ø Dsb For Footings And Columns (bedbars And Vertical Bars) Installation Of 10 Mm Ø Dsb For Column Lateral Ties, Concrete Flooring For Plantbox, Concrete Topping, Bench Footing And Bench, Concrete Flooring For Landing And Stairs •installation Of 50 Mm Ø G.i. Pipe Schd. 40 For Lamp Post •installation Of 50 Mm Ø G.i. Pipe Schd. 40,25 Mm X 25 Mm X 3mm Angle Bar And 50 Mm X 50 Mm Wire Mesh (5mm Thk.) For Railings •installation Of 38 Mm Ø G.i. Pipe Schd. 40 For Bench Fabrication Masonry Works •piling Of 4" Thk. Chb At 800 Mm Height W/ 10mm Ø Dsb For Vertical And Horizontal Bars Sped At 0.60m O.c Bothways For Plantbox Softscape •installation Of Plantboxes With Plants And Frog Grass I. Construction Safety And Health Program (q = 1.00 Lumpsum) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Ii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 3"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iii. Mobilization & Demobilization (q = 1.00 Lot) Iv. Facilities For The Engineers (q = 1.00 Lot) Includes True-rms Clamp Meter, 400 A Ac/oc, 600v Ac/oc, Cat Iii 600 V Cat Iv 300 V, Fluke 325; Digital Light Meter, Up To 20,000 Lux, Fluke 941; Non-contact Voltage Tester,90 V Ac To 1000 V Ac, Cat V 1000, Fluke 2ac. V. Removal Of Structures And Obstruction (q = 55.56 Cu.m.) Includes Uprooting/cutting Of Trees. Vi. Earthworks (q = 59.82 Cu.m.) Includes Volume To Be Excavated, V = 39.82 Cu.m.;volume To Be Backfilled, V = 39.82 Cu.m.; Gravel Bedding, 1-1/2"ø, V = 20 Cu.m Vi . Steel Reinforcements & Steel Works (q = 9,083.70 Kgs.) Includes 12 Mm Dia. X 6m Dsb; 10 Mm Dia. X 6m Dsb; #16 G.i Tie Wire; 50 Mm Ø G.i. Pipe Schd. 40; 38 Mm Ø G.i. Pipe Schd. 40; 25.4 Mm Ø G.i. Pipe Schd. 40; 5mm Ø Thk. Wire X 50mm X 50mm Mesh Steel Matting; 25 Mm X 25 Mm X 3mm Thk. Angle Bar; Red Lead Metal Primer, Quick Dry Enamel Paint, Paint Brush; Welding Rod (e-6011). Viii. Concrete Works, Formworks And Scaffoldings (q = 47.04 Cu.m.) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, 2" X 2" X 10' Sized Coco Lumber, Assorted Sized C.w Nails. Ix. Masonry Works (q = 194.40 Sq.m.) Includes 4" X 8” X 16" Chb, Portland Cement, Washed Sand, Pebbles. X. Electrical Works (q = 1.00 Lot) Includes Modern-type Outdoor Lamp W/ Post, 2m Height, W/ High-powered 50w Led Bulb, Daylight; Outdoor Bollard Fixture W/ 20w Led Bulb,ip65; Cu Wire,3.5mm2, Thhn/thwn-2, Stranded; Circuit Breaker,15a,2pole,220v,60hz; Circuit Breaker Enclosure, Nema 1,2p; Secondary Rack W/spool Insulator,2-pole,w/screws; Outdoor Junction Box, Ip65 Weather Water Proof, 80x50 Round/octa, W/ Rubber Gasket & Screws; Upvc Conduit Pipe,1/2"x3m; Electrical Tape,0.16x19x16000 Mm; Solvent Cement 200 Cc; Pvc Conduit Fittings And Connectors. Xi.softscape (q = 30.20 Sq.m.) Includes Softscape (includes Garden Soil (planting Medium), Ornamental Plants ,shrubs , Trees). Approved Budget For The Contract (abc): P 3,381,096.77 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Sixty-seven (167) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: December 10, 2024 – January 7, 2025 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2. Pre-bid Conference: December 17, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Submission Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5. Opening Of Bids: January 7, 2025 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City.the Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: December 10, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-149 (ceo-infra)

Details: Description 1.the Local Government Unit Of The Municipality Of Magsaysay, Through The Local Government Support Fund- Financial Assistance (lgsf-fa) To Local Government Units Under The Fy 2023 General Appropriations Act Or Republic Act (ra) No. 11936 Intends To Apply The Sum Of Five Million Pesos Only (p 5,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Purchase Of Vehicle – 1 Unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck (2nd Call) In Barangay Poblacion, Magsaysay, Occidental Mindoro With Contract Identification Number Of Itb-2024-044. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Local Government Unit Of The Municipality Of Magsaysay Now Invites Bids For The Purchase Of Vehicle – 1-unit Disaster Equipment/ Vehicle For Disaster Response And Rescue Activities – Fire Truck: Brand New 2000 Liters Stainless Steel P.t.o. Fire Truck 6-wheeler Unit Equipped W/ Side P.t.o. Driven Rear Mounted 1000 L.p.m. Fire Pump Unit Specifications: *engine: Japan Made Blue Power Diesel Engine With Manual Transmission (euro 4) - Engine Capacity: 2,999cc With Four Cylinder Diesel Engine *chassis: Brand New 6-wheeler Chassis With Large Carrier Type *differential: 5 Stud Heavy Duty 6-wheeler Heavy Duty Large Carrier Differential *water Tank: 2,000 Liters Water Capacity Oval Shape Imported Stainless Steel Water Tank - Water Level Indicator: Manual Type Water Level Indicator With Special Plastic Tubing With Aluminum Frame With Fittings *fire Pump: 1000 Liters Per Min (l.p.m.) Side Power Take Off Driven European Made ( Euro Standard )fire Pump -manufactured With High Quality Light Alloy Aluminum -single Stage Bronze Blower -complying With En (european) Iso 9001:2015 Certification -thermal Expulsion System (to Avoid Overheating) And Mechanical Stuffing Impermeability -self-priming With Automatic Suction System -vacuum Pump Made Of Etial 171 Aluminum Alloy -bronze (rg5 Gin 1705) Bearing Material -manually Controlled Electromagnetic Clutch For Vacuum Engaging -automatic Relieve System By Danfoss Pressure Transmitter -discharge Capacity Of 1000 Lpm - Gauges: 2023 Modern Design Pressure And Compound Gauges With Lcd Monitor System *power Take Off: Brand New Single Output Euro Grade Side P.t.o. (power Take Off) -p.t.o. Rpm Increaser: Equipped With Brand New Euro Grade 1/2.8 Rpm Increaser -european Made P.t.o. (class A) Side P.t.o. With R.p.m. Increaser -complying With En (european) Iso 14001:2015 Certification *equipped With Brand New Original Euro Grade Class A Power Take Off (p.t.o.) Drive Shafts *pump Connection: Stainless Steel Piping System -discharge Valve: 2 Sets Brand New Class A European-grade 2½” Anodized Aluminum Discharge Outlet Valves -suction Inlet: 1 Set Brand New Brass Suction Inlet -tank To Pump Valve: 1 Set Brand New 3” Japan-grade Tank To Pump Ball Valve *body (superstructure): Custom Fire Truck Superstructure “ Fire Tanker Style Body” -roll Up: 1 Set Imported Euro-grade Aluminum Roller Shutter § Designed For Pump Protection And Equipment Storage § Anodized Coating And High Quality Aluminum § Pipe-type Spring Locking For Opening And Closing The Roller Shutter § Specially Designed Aluminum Tumblers With Locking System § Plastic Cording For Water And Dust Proofing -crew Bench: Brand New Semi Open Type Compartment With Roof With Seating For 4 Men § Lined With High Quality Aluminum Checkered Plate Panels § Installed With Cushion For Seats With Plastic Protection -air Conditioning: Brand New Aircon Assembly For Front Cab Included -access Stairs: 2 Sets Custom Made Stainless Steel Access Stairs At The Middle Portion *fire Turret: Brand New Adjustable Nozzle Heart Shape Japan Grade Imported Fire Turret -made Out Of Bronze Bc6 (c83600), Which Is Ideal For Corrosive Environment -cast Ball Joints Fitted With Stainless Steel Ball Bearings And Lubricated With A Grease Mouth -stainless Steel Levers And Pvc Handles -2.5" Outlet Diamater With Angel Of Rotation At 85° Elevation Angle And 40° Depression Angle -capable Of 360° Rotation Adjustable Movement And 1 Types Of Water Output (adjustable) *painting: Imported Hipic High Quality Poly Urethane Paint “fire Red” Color *manufacturer And Supplier Iso Standard Minimum Requirement: -local Company Bidder And Supplier Manufacturer Must Have Iso 9001:2015 For Quality Management Standard For Supply, Delivery And Manufacture Of Fire And Rescue Vehicles. -local Registered Company Bidder And Supplier Must Be Registered In Trading, Sales And Supply Business For Fire Trucks For At Least Minimum Of 15 Years Or More To Assure Top Quality Experience & Training In Service And Maintenance With Specialized Equipments In The Industry. Delivery Of The Goods Is Required Within One Hundred Twenty (120) Calendar Days. Bidders Should Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4.interested Bidders May Obtain Further Information From Local Government Unit Of The Municipality Of Magsaysay And Inspect The Bidding Documents At The Address Given Below During Office Hours (8:00 Am To 5:00 Pm). 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 – January 06, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (p 5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6.the Local Government Unit Of Magsaysay Will Hold A Pre-bid Conference On December 23, 2024 (10:00 Am) At The Office Of The Bids And Awards Committee, 2nd Floor, Municipal Building, Jp Laurel Street, Poblacion, Magsaysay, Occidental Mindoro Which Shall Be Open To Prospective Bidders. 7.bids Must Be Duly Received By The Bac Secretariat On Or January 06, 2025 (09:30 Am) Through Manual Submission At The Office Address As Indicated Below. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9.bid Opening Shall Be On January 06, 2025 (10:00 Am) At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10.the Local Government Unit Of The Municipality Of Magsaysay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Description: BOQ ITEMS: Inj Amikacin sulphate 250mg/ml vial of 2ml, Inj Hyoscine Bromide 20 mg / ml, Inj Ketamine Hcl 50 mg / ml - 2 ml, Inj Bupivacaine HCl 5 mg/ml heavy 4 ml , Inj Pantoprazole 40 mg , Inj Lignocaine Hcl 2% with Adrenaline 1/80000 - 2 ml cartridge, Inj Lignocaine Hcl 2% without Adrenaline Vial of 30 ml Inj Lignocaine Hcl 2% without Adrenaline Vial of 30 ml Inj Lignocaine Hcl 2% without Adrenaline Vial of 30 ml, Inj Adrenaline Tartrate 1/1000 amp of 1ml, Inj Dextrose 25% - 25 ml, Inj Dextrose 50% - 25 ml, Inj Amoxycillin1000mg+ Clavulanic acid 200 mg, Inj Human Rabipur Vaccine 1ml/dose, Inj Typhoid Vi polysaccharide 0.5 ml , Inj Pentazocine Lactate 30mg/ml, 1ml, Inj Tranexamic acid 500mg/5ml, Inj Ranitidine Hcl 50 mg/2 ml, Inj Artesunate 60mg/ml amp of 2ml, Inj Atropine sulphate 0.6 mg / ml, amp of 1ml, Inj Ceftriaxone 1gm, Inj Morphine 15 mg, 1 ml , Inj Multi Vit 10 ml with minimum constituents having Thiamine (B1)-30mg/ml, Pyridoxine (B6) 30mg/ml and (B12) Cyanocobalamin-300mcg/ml, Inj Sodium Bicarbonate 7.5% amp of 10ml, Inj Paracetamol with Cysteine HCl monohydrate infusion 1000 mg/100 ml, Inj Mannitol 20%, 100 ml bottle, Inj Nor Adrenaline bitartrate 2mg/ml, Inj Lorazepam 2 mg/ml, 2 ml , Inj Insulin Lispro 25% and 75% Insulin Lispro Protamine Susp 300 IU, Prefilled Pen, Inj Diclofenac 25 mg/ml IP, 3 ml , Inj Midazolam 5 mg, 1 ml , Inj Thiamine 100 mg/ml, 2 ml Amp , Inj Ciprofloxacin 200 mg bott of 100 ml , Inj Hydrocortisone Sodium Succininate 100 mg, Inj Pheniramine Maleate 22.5 mg / ml amp of 2ml , Inj Metronidazole for IV use containing 500 mg per bott of 100 ml, Inj Etophylline 84.7mg +heophylline25.3mg/ml amp of 2ml, Inj Anti Venom serum polyvalent dry vial of 10ml, Inj Tetanus Toxoid, purified, absorbed rubber capped, Vial of 5 ml (10 Doses), Oint Mupirocin 2% tube of 5gm, Oint Silver Sulphadiazine 1% tube 20 gm , Oint Framycetin Sulphate cream 1% tube of 100 gm, Oint Framycetin sulphate cream 1% tube 20 gm, Oint Lulicanazole tube of 20gm , Sunscreen lotion tube of 60 ml, Tab Naproxen 250 mg, Tab Cinnarizine 25 mg, Tab Levofloxacin 500 mg, Tab Folic Acid 5 mg, Tab Mefanemic Acid 250 mg+ Dicyclomine HCL 10 mg, Tab Ranitidine 150 mg, Tab Ascorbic acid 500 mg, Tab Vitamin-complex therapeutic with a minimum concentration , Tab Amoxycillin 500 mg + Clavulanic acid 125 mg, Amoxycillin 875 mg + Clavulanic acid 125 mg- 1000 mg, Tab Fluoxetine HCl 20 mg , Tab Glucosaimine 500 mg, Tab Glucosamine 250 mg + Chondrotoin Sulphate 200 mg , Tab Tramadol Hcl 50 mg , Tab Fexofenadine 180 mg, Tab Ornidazole 500mg + Ofloxacin 200mg, Tab Atorvastatin 20 mg , Tab Clopidogrel 75 mg, Tab Antacid containing Aluminium hydroxide 250 mg, Magnesium hydroxide NF 250 mg, Methyl Polysiloxane 50 mg, Tab Norfloxacin 400 mg + Tinidazole 600 mg, Tab Doxylamine Succinate 10 mg + pyridoxine Hydrochloride 10 mg IP , Tab Etoricoxib 90 mg, Tab Terbinafine Hcl 250 mg, Tab Duloxetine 20 mg, Tab Paracetamol 650 mg, Tab Telmisartan 40 mg + HCTZ 12.5 mg, Tab Ciprofloxacin 500 mg, Tab Diclofenac Sodium SR 100 mg , Tab Levetiracetam 500 mg , Tab Canagliflozin 100 mg , Tab Itopride 50 mg , Tab Thyroxine Sodium 25 mcg , Tab Thyroxin 50 mcg, Tab Thyroxine Sodium 100mcg, Tab Azithromycin 500 mg , Tab Nitrofurantoin 100 mg , Tab Acyclovir 800 mg , Tab Sitagliptin phosphate 100 mg, Tab Nifedipine Retard 20 mg , Tab Ramipiril 5 mg, Tab Ramipiril 10 mg, Tab Dabigatran Etexilate 150mg, Tab Indomethcin 75 mg SR, Tab Allopurinol100 mg, Tab Rifampcin 600mg + Isoniazid 300mg, Cap Fluconazole 150 mg, Cap Cefuroxime 250 mg , Cap Doxycycline 100 mg , Cap Gabapentin 300 mg , Cap Amoxycillin IP 500 mg , Cap Vitamin E 200 mg, Cap Omeprazole 20mg+Domperodone 10 mg, Sevoflurane Bottle of 250 ml, Ether Solvent bott of 500ml , Syp Lactulose each 5ml containing 3.325g bott of 100ml, Syp Cetrizine 5 mg / 5ml bott of 60 ml, Syp Cough Sedativeeach 5ml containing Chlorpheniramine Maleate 2.5 mg, Guiaphenesin 100mg, Noscopine 15mg, Sodium citrate 60mg in flavoured base bott of 100ml, Syp Bromhexine Syp 5 ml containing 4 mg of Bromhexine Hcl bottle of 100 ml, Syp Azithromycin 200 mg per 15 ml, Syp Zinc 20 mg/5 ml, bottle of 100 ml, Iron Syp Paediatric Each 5 ml Containing elemental iron of 50 mg as iron polymaltose complex in 200 ml bottle, Syp Levo-Salbutamol 1mg/5ml bottle of 100 ml, Syp Calcium Phosphate (80mg/5ml), 200 ml bottle, Syp Metronidazole suspension 200 mg/5 ml bott of 60 ml, Syp Iron drops Paediatric containing Ferrous fumerate 25mg/ml, Vit B12 12.5mg/ml & Folic Acid 200mg/ml bott of 15ml, Syp Multivitamin drops with constituents having Vit A-1400-1600 IU/ml, vit b1-0.3-0.6mg/ ml, vit B2 -0.3-0.8 mg/ml, vit B6 -0.2-0.6 mg/ml, vit C-20-30 mg/ml, vit D-200-400 iu/ml in bott of 15 ml , Syp Albendazole 200 mg / 5 ml bott 10 ml , Syp Dextromethorphan hydrobromide 5.0mg/5ml + Chlorpheniramine maleae 2.0mg/5ml (Tixylix), Syp Antacid gel each 5 ml containing dried Aluminium hydroxide gel 250mg,Magnesium hydroxide 250mg & Simethicone suspension bott of 200ml, Syp Ibuprofen 100 mg/5 ml Bott of 50 ml, Syp Cefuroxime 125 mg / 5 ml bott 30 ml , Syp Dicyclomine + Simethicone bott of 30 ml, Syp Chlorpheniramine Maleate 2mg/5ml+ Phenylepherine HCL 5mg/5ml,bott of 60ml, Syp Ibuprofen 100 mg + Paracetamol 162.5 mg, Syp Montelukast 4 mg + Levocetirizine 2.5 mg, Syp Ofloxacin + Ornidazole bott of 30ml, E/D Ciprofloxacin 0.3% eye drops of 3 mg/ml bott of 5ml, E/D Carboxy MethyI Cellulose 1% Eye drops bott of 5 ml , E/D Para dichlorobenzene 2% w/v Benzocaine 2.7% w/v Chlorbutol 5% , Turpentine oil 15% w/v bott of 10ml, E/D Ciprofloxacin HCl 0.3% + Dexamethasone 0.1 % bott of 5ml, Midazolam nasal spray 0.5 mg/spray 5 ml bottle, Xylometazoline HCL 0.05% w/v nasal Solution for paed use bott of 10ml, MDI Formeterol 6 mcg and Budesonide 400 mcg CFC free MDI, 120 metered doses, MDI Salmetrol 50 mcg + Fluticasone 250mg inhaler of 60 doses, MDI Levo-Salbutamol aerosol inhalation inhalerpack of 200 metered dose , MDI Budesonide 200mcg Inhaler, Resp Budesonide 1mg , Resp Levosalbutamol inhalation solution amp of 2.5ml, Isabgul husk 3.5 gm sachet, Clotrimazole mouth paint 1% - 15 ml, Povidone Iodine solution 5% bott of 500 ml, Povidone Iodine Germicidial Gargle 2%W/V bott of 100ml