Machinery And Tools Tenders

Bm-210 Replacement Of Burner Tilt Mechan

Operation And Maintenance Of Existing Ugd Pumping Station In Zone 1 In Madurai Corporation Package 02

Nctps Ii Mi Circle Mpm Dn Unit Ii Mill 2a To 2j Replacement Of Damaged Gasket After Dismantling Of Special 414 Couplings

Spare And Repairing Of P/shaft, Wheel Greasing And Leaf Repairing Rt-30 Rig

CATEGORY: HDPE laminated Sand Bag of size 75x40 cm, Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120 x 120mm x 2.4m long for column with holes made on the top of coln as per design for fixing G1 Beam. Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 1.85 mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 60 Cm mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 125 RSJ 125 x 70mm G2 3.0m long for beam 2 conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , SHS 6 mm thick size 70x70mm x 1.85m long for G3 Bottom bracing with conforming to relevant IS Make TATA oblique Sail oblique Jindal , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts. , 6mm thick MS plate 100mm x 100mm with a gap of 75mm welded with coln bottom to connect 70mm x70mm SHS with nut and bolts, 04 each. , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , 6mm thick MS base plate of size 150 x150 mm for SHS column including welding, knotching, cutting and nuts,bolts, washer etc. , Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete. , MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1 Kg oblique RM black in colour and shall contain not less than 2 percenttage of carbon black, Sample to be approved before supply. , Red Oxide primer conforming to relevant IS. , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS, Make, Johnson and Nicholson India Ltd, Nerolac Paint and Asian Paint. , Thinner, Sample to be approved before supply. , Dry distemper, Sample to be approved before supply. , Chalk whiting, Sample to be approved before supply. , Paint Brush 4 inch Make, Amar oblique Lucky Sample to be approved before supply. , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame. , Supply of Swivel Bullet proof glass glass 750mm x 500mm size 72 mm thick with fabricated iron frame including necessary locking arrangement in the frame to fix the glass in the loop hole. , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun. , Ply wood 10 mm thick as per requirement for flat surface. , Foundation bolts of 16 mm dia and 250 m long with nut, bolts washer etc.

Operation And Maintenance Of Existing Ugd Pumping Station In Zone Ii In Madurai Corporation Package 02

CATEGORY: Mobile Iron Barricades - Large (MHA) (Q3)

Drinking Water ATM / Water Vending Machine (Version 2) (Q3)

CATEGORY: Milk Analyzer Machine

Technical Assistance For Operation Of Eot Cranes Of Thin Slab Caster Tunnel Furnace And Hot Strip Mill. For A Period Of 2 Years In Integrated Steel Plant, Nagarnar, Near Jagdalpur, Chhattisgarh