Fire Tenders

Details: Description Invitation To Bid For The Improvement Of The Mhso Building 1. The Municipal Government Of La Trinidad, Through The General Fund 2023 Intends To Apply The Sum Of One Million Nine Hundred Ninety-nine Thousand Seven Hundred Forty-five And 41/100 Pesos (php1,999,745.41) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of The Mhso Building (pow-8751-2024-pug-08). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of La Trinidad, Benguet Now Invites Bids For The Project: Project Reference No.: Pow-8751-2024-pug-08 Name Of Project: Improvement Of The Mhso Building Project Location: Puguis, La Trinidad, Benguet Contract Duration: 111 Working Days Source Of Fund: Gf 2023 Brief Description: Item Scope Of Work To Be Done Spl. A Construction Billboard Spl. B Mezzanine Works Spl. C Roofing Works Spl. D Utilities Works Spl. E Pwd Fixtures Spl. F Fire Exit Stair Works Spl. G Fencing Works Spl. H Shed Works Spl. I Personal Protective Equipment Equipment Requirement: 1 Unit Heavy Duty Cut-off Machine 1 Unit Welding Machine 1 Unit Heavy Duty Drill 1 Unit Heavy Duty Grinder 1 Unit Jack Hammer 1 Lot Steel Scaffolding Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Of The Municipal Government Of La Trinidad, Benguet And Inspect The Bidding Documents At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet From 8:00am To 5:00pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20 – December 11, 2024 At Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Thousand Pesos (php5,000.00). 6. The Municipal Government Of La Trinidad, Benguet Will Hold A Pre-bid Conference On November 27, 2024 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet On Or Before December 11, 2024 At 9:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On December 11, 2024 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Corazon A. Uyaan Head Bac Secretariat Bids And Awards Committee Office Municipal General Services Office-extension 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet Contact Nos.: 0969 – 334 – 9233 Or (074) 619-2103 E-mail Address: Bac01latrinidad@yahoo.com Approved: (sgd.) Yoshio P. Labi Bac Chairperson Noted: (sgd.) Romeo K. Salda Head Of The Procuring Entity

Details: November 16, 2023 Update: The 2020 Socom Baast Is Amended To: (1) Delete Contracting/agreements Officer Thuy Nyugen From Section 2.0; (2) Make Numerous Revisions To Section 4 “technical Areas Of Interest”; (3) Revise Section 5.7 “notional Evaluation Period” Changing Current Submission Date Through 5 January 2024 And Current Evaluation Period To Reflect 2 February 2024 To 7 March 2024. october 30, 2023 Update: The 2020 Socom Baast Is Amended To: (1) The Baa Statutory Authority To: Far 6.102(d)(2), Far 35.016, 10 U.s.c. 4001, 10 U.s.c. 4021, 10. U.s.c. 4023, 10 U.s.c. 4022, And 10 U.s.c. 4022(f) And (2) The Agreements Officer From Ramona Delamarter To Ronald Reed And Thuy Nguyen. march 20, 2023 Update: The 2020 The 2020 Socom Baast Is Amended To Correct The Attachment File Name From Fy20 St Baa_fnl 15feb22_amend_3.pdf To Fy20 St Baa_fnl 22feb23_amend_3.pdf. february 22, 2023 Update: The 2020 Socom Baast Is Amended To (1) Update The Contracting Officer, Changing From Thuy Nguyen To Ramona Delamarter, (2) Update The Secondary Contracting Poc From Juanita Remington To Terry Ann Lewis, And (3) Issue Amendment 3, Dated 15 Feb 2023, To The Broad Agency Announcement, The Following Sections Have Been Updated: 3.0 Closing Date And 5.0 Supplemental Submission Instructions And Information. october 19 2022 Update: The 2020 Socom Baast Is Amended To Update The Contracting Officer Changing From Ronald Reed To Thuy Nguyen, Issue Amendment 2, Dated 18 Oct 2022, To The Broad Agency Announcement, And Change The Technical Point Of Contact Email To Baast@socom.mil june 25 2021 Update: The 2020 Socom Baast Is Amended To Replace The Classified Poc. Mr. Jim Griffin Is Deleted As Classified Poc. Dr. Conrad Lovell Is The New Classified Poc. may5 2021 Update: The Closing Date Of This Notice Has Been Amended To Reflect31 December 2025, Which Is The Date The Socom Baa Ends. The Government Contacts Section Has Been Updated To Add Ms. Juanita Remington As Alternate Contracting Poc. Lastly, The Peo-sr Classified Annex Has Been Removed From Section 4.1.2 Of The Baa. may 21 Update: The Closing Date Of This Notice Has Been Extended Until 3:00 Pm (eastern) Tuesday May 26th. In Addition To Previously Noted Issues With The Url, There Have Been Issues With Some Files Not Making It Through The Ussocom Fire Wall. In Order Toaddress These Issues Please Reducefiles To Less Than 10mb. Please Also Consider Compressing Files That Are Larger, Or Converting To Pdf. notice: This Update Corrects The Url Found In The Original Ussocom-baast-2020 Posting. The Correct Url To Submit White Papers Is: https://www.socom.mil/sof-atl/pages/baa.aspx please Ensure That When Copy And Pasting This Url, The Dash Between Sof And Atl Is Included. There Is A Known Issue With The Dash Being Dropped When Copy And Pasting. this Broad Agency Announcement (baa), Which Sets Forth Research And Development In The Focus Areas Of Interest To The United States Special Operations Command (ussocom), Special Operations Forces Acquisition, Technology, And Logistics (sof At&l), Directorate Of Science And Technology (s&t). This Baa Is Issued Under The Provisions Of 6.102(d)(2) And 35.016 Of The Federal Acquisition Regulation (far), Which Provides For The Acquisition Of Basic, Applied, And Advanced Research And That Part Of Development Not Related To The Development Of A Specific System Or Hardware Procurement Through The Competitive Selection Of Proposals, As Well As, 10 U.s.c. 4001, 10 U.s.c. 4021, 10 U.s.c. 4022, And 10 U.s.c. 4022(f), Which Provide The Authorities For Issuing Awards Under This Announcement For Basic, Applied Research, Advance Research, Development, Prototyping Projects, And Follow-on Production. Proposals Submitted In Response To This Baa And Selected For Award Are Considered To Be The Result Of Full And Open Competition And In Full Compliance With The Provisions Of Public Law 98-369, "the Competition In Contracting Act Of 1984" And Subsequent Amendments. ussocom Is Interested In Receiving White Papers From All Responsible Sources (reference Far 9.1) From Industry, Academia, Individuals, Federally Funded Research And Development Centers, National Laboratories, And Government Laboratories Capable Of Pursuing, Developing And Evolving Disruptive Capabilities That Must Be Made Available To The Sof Operator Within The Next Five To Seven Years In Order To Achieve Mission Success In The Future Operating Environment (foe). ***this Baa Will Remain Open For 5 Years Until31 December 2025, Unless Superseded, Amended, Or Cancelled.***

Details: Description Invitation To Bid For Supply & Delivery Of Office & School Supplies 1. The Local Government Unit Of Sikatuna, Through The General Fund Intends To Apply The Sum Of Three Hundred Eighty-five Thousand Pesos (php385,000.00) Being The Abc To Payments Under The Contract For Supply & Delivery Of Office & School Supplies/sikatuna-2024-goods-25. Bids Received In Excess Of The Abc Allocated Per Office Shall Be Automatically Rejected At Bid Opening. Name Of Office Description Approved Budget Per Office Municipal Treasurer’s Office Supply And Delivery Of Office Supplies 17,000.00 Ldrrm Office Supply And Delivery Of Office Supply 13,000.00 Assessor’s Office Supply And Delivery Of Office Supply 20,000.00 Municipal Health Office Supply And Delivery Of Office Supply 24,000.00 Lcr Office Supply And Delivery Of Office Supply 6,000.00 Dilg Office Supply And Delivery Of Office Supplies 3,870.00 Mswdo-lcpc Supply And Delivery Of Office Supplies 44,000.00 Mswdo-pwd Office Supply And Delivery Of Office Supplies 15,000.00 Nutrition Office Supply And Delivery Of Office Supplies 6,000.00 Sikatuna Fire Stattion Supply And Delivery Of Office Supplies 10,720.00 Mayor’s Office (mmo) Supply And Delivery Of Office Supplies 39,410.00 Tourism Office (mmo) Supply And Delivery Of Office Supplies 16,000.00 Sb Office Supply And Delivery Of Office Supplies 20,000.00 Suporta Skwela Program Supply And Delivery Of Office And School Supplies 150,000.00 Total Budget For The Contract Php385,000.00 2. The Local Government Unit Of Sikatuna Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Shall Be Within Twenty (20) Calendar Days Upon Receipt Of Noticed To Proceed. Bidders Should Have Completed, Within The Past Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Local Government Unit Of Sikatuna And Inspect The Bidding Documents At The Address Given Below During Monday To Friday At 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22, 2024 To November 29, 2024 From The Given Address Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting It In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 29, 2024 At 1:00pm At Bac Office, 2nd Floor, Sikatuna Town Hall Building, Poblacion I, Sikatuna, Bohol 6338 . Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14.1. 8. Bid Opening Shall Be On November 29, 2024 At 2:00pm The Given Address Below Bac Office, 2nd Floor, Sikatuna Town Hall Building, Poblacion I, Sikatuna, Bohol 6338. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Unit Of Sikatuna Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Abegail B. Sentorias Bac Secretary Sikatuna Municipal Hall Building Poblacion I, Sikatuna, Bohol 6338 Sikatuna1917@gmail.com Www.sikatunabohol.gov.ph _____________________________ Engr. Ronald C. Quimpan Bac Chairperson

Details: Description Republic Of The Philippines Province Of Quirino Municipality Of Cabarroguis -ooo- Bids And Awards Committee Invitation To Bid For Procurement/provision Of Medical/non-medical Supplies And Non-medical Equipment, Cabarroguis, Quirino 1. The Local Government Unit Of Cabarroguis, Through The 5% Ldrrm Fund 2024- (ldrrmo- Procurement Of Medical/non-medical Supplies) And Supplemental Budget No. 1 Series Of 2024 – Lbt Fund 2024- (ldrrmo- Provision Of Medical/non-medical Equipment (additional Oxygen Tank -20lbs And Siren) Intends To Apply The Sum Of Three Hundred Seventy Nine Thousand Four Hundred Pesos (ᵽ 379,400.00) Inclusive Of Vat Being The Abc To Payments Under The Contract For Procurement/provision Of Medical/non-medical Supplies And Non-medical Equipment, Cabarroguis, Quirino With Identification Number Lgucq-goods-2024-0024 With The Following Specifications. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Project 1: Procurement Of Medical/non-medical Supplies To Be Used At 24/7 Drrm Operation Center, Cabarroguis, Quirino Abc: Php 79,400.00 Item No. Unit Item Description Quantity 1 Pc Cervical Collar Adjustable Neck Brace Emergency Rescue Trauma Ems C-collar Neck Support 1 2 Pc Adult Trauma Bag With Content 3 Project 2: Provision Of Medical/non-medical Equipment (additional Oxygen Tank- 20lbs And Siren, Cabarroguis, Quirino) Abc: Php 300,000.00 1 Pc Siren, Ms790 2 2 Pc Siren, Ms590 1 3 Pc Fire Extinguisher, 10lbs, Green 7 4 Pc Oxygen Tank With Regulator, 20lbs 2 2. The Local Government Unit Of Cabarroguis Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Cabarroguis And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024 To November 27, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (ᵽ500.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Facsimile, Or Through Electronic Means. 6. The Local Government Unit Of Cabarroguis Will Hold A Pre-bid Conference On November 15, 2024 At 9:00 Am At Ldrrm Function Hall, Cabarroguis, Quirino Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 27, 2024 At 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 At 9:30 Am At Municipal Hall, Cabarroguis, Quirino. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Cabarroguis Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Plaridel A. Uao Bac Chairman Local Government Unit Of Cabarroguis Zamora, Cabarroguis, Quirino Plarideluao@yahoo.com.ph Cp#: 09173185908 Eduardo A. Abad Jr. Bac Secretariat Lgucabarroguis@gmail.com Cp#: 09171003749

Details: Description Republic Of The Philippines Chd Government Of Ormoc City P.r. No.: 242883 Bids And Awards Committee Quotation No.: 245489-3035 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 20 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 413,500.00 Activities Schedule From To 1 Issuance Of Canvass Thursday November 21, 2024 Tuesday November 26, 2024 2 Submission Of Canvass Wednesday November 27, 2024 10:00 Am 3 Opening Of Canvass Wednesday November 27, 2024 2:00 Pm # Item And Description Qty Unit Cost Total 1 Table, Office 3 Unit *good Quality *laminated Material *with Mobile Pedestal *with Grommet Hole *wide Leg Room *size: 140 X 70 X 75cm *color: Brown/oakwood 2 Cabinet, Lateral (4) Drawers 6 Unit *4-drawer Lateral Steel Cabinet *centralized Lock *powder Coated Finish *high Quality *size: 900 X 450 X 1385mm *color: Light Gray/beige 3 Industrial Fan 20 Inches 17 Unit *wall Fan, 3 Speed *max Output: 155w *air Delivery: 145m3/min *w/ Built-in Thermal Cut-off Relay *single Phase *max Speed: 1600rpm "*220v-240v 60hz " *weight: 15.8kg *dimension: 62 X 57 X 20cm *include Installation 4 Cabinet, Filing Lateral (3) Drawers, Beige Plain Finish, Gauge 20 2 Unit *3-drawer Lateral Steel Cabinet *centralized Lock *powder Coated Finish *high Quality *size: 900 X 450 X 1065mm "*color;biege/light Gray " 5 Table, Folding 5 Unit "6ft. Rectangular Folding Table - " Size: H 29in. X L 72.3in X W 27.5in. Color: White Granite/ Black *lasting Quality, Strenght & Durability 6 Refrigerator (unit) 1 Unit Brandnew Specification "*volume Capacity: 7.2 Cu.ft " "*capacity: 205 Liters (gross) / 187 Liters (net) " *rating; 230v / 60hz "*dimension: 555x1400x620 (wxhxd, Mm) " *net Weight: 40kg "*color: Dark Graphite " *inverter Compressor *2 Doors Inclusive With: "*1 Year Warranty On Parts And Service/labor " 7 Industrial Extension Wire Wheel 5 Unit *25meter Wheel Type Extension Cord *with Thermal Activation Breaker *thermoplastic Housing *with T-slots Heavy Duty Outlets *heavy Duty Ground Plug *equipped W/ Residual Current Protective Device 8 Extension Wire, 4 Gang 5 Pc *regular Universal Socket W/ Heat Resistant, Fire Retardant *scratch Proof Pvc Material *accepts Round Or Flat Pronged Plug With Ground *with Thermal Breaker Intend To Cut Power When Overloaded And Short Circuit *6meters Wire Cord And Plug Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2024-11-242883 Printed Name/signature/date

Details: Description 1. The Denr-environmental Management Bureau - Xi Through The National Expenditure Program (nep) Intends To Apply The Sum Of Seventy Million Pesos (p70,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The “complete Design Of The 3-storey Emb Xi Office Building And Construction And Installation Of Architectural And Structural, Drainage And Septage, Water Supply And Distribution System, Electrical Fixture And Equipment, Heating And Ventilation Air Conditioning System (hvac), Fire Protection System (fps), Public Address System, Voice And Data System (pabx / Lan) For The Entire 1st Floor Of The Building” With Contract Id Number Embxipbd-2024-002 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening Of The Financial Proposals. 2. The Denr-environmental Management Bureau - Xi Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within Three Hundred Four (304) Days Or Ten (10) Months And Shall Commence From The Date Of The Issuance Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Denr-embxi - Bids And Awards Committee (bac) Secretariat Through The Contact Details Given Below From 8:00 A.m. To 5:00p.m. (monday To Friday) Except During Non-working Days Or Holidays And Inspect The Bidding Documents As Posted On The Websites Of The Denr-embxi And The Philippine Government Electronic Procurement System (philgeps). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 16, 2024 – November 26, 2024 At 12:00 Nn From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Amount Is Fifty Thousand Pesos (p50, 000.00). The Bidders Must Pay The Corresponding Amount In The Emb Xi Cashier Only. Bidders Must First Secure An Appointment Thru Our Online Appointment System Website Http://r11online.emb.gov.ph/?page_id=993 For The Date And Time Of Payment Which Will Then Be Presented Upon Payment. 6. The Denr-embxi Will Hold A Pre-bid Conference On October 23, 2024 (wednesday) At 1:30pm At The Denr-emb Xi Office, 3rd Avenue Corner V. Guzman St. Sta. Ana, Davao City And Via Face To Face And/or Through Video Conferencing Or Webcasting With Meeting Link: Https://msteams.link/0re6 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before November 26, 2024 At 12:00 Nn (tuesday). Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 26, 2024 At 1:30 Pm (tuesday) At The Denr-embxi Conference Room, 3rd Avenue Corner V. Guzman St. Sta. Ana, Davao City Through Face To Face And And/or Through Video Conferencing Or Webcasting With Meeting Link Https://msteams.link/0re6 Or Combination Thereof. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Denr-embxi Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Bac Secretariat /procurement Unit Finance And Administrative Division Denr-environmental Management Bureau Xi 3rd Avenue Corner V. Guzman St. Sta. Ana Davao City Email Address: Embxibac@emb.gov.ph Landlines: (082)234-0061 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Http://r11.emb.gov.ph/invitation-to-bid/

Details: The municipality of Michendorf intends to award the supply of fire service equipment, door opening set, in accordance with DIN 14800-12, latest version, for the volunteer fire service of the municipality of Michendorf.

Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories:  Flame Sensor  Electronic Ignition System  Automatic Fuel Shut-off  Adjustable Fuel Vaporizer  Automatic Temperature Control  Temperature Monitoring System  Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum  Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks  With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories:  With Temperature Control  With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum  With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder  Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment  Dust Mask  Safety Goggle  Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Establishment Of 1 Unit Corn Post Harvest Processing Facility, Camansi, Alamada, Cotabato Total Abc: P49,897,970.30 Line Item No. 2: Supply, Delivery, Installation And Commissioning Of Corn Processing Equipment Abc: P23,320,000.00 A. Corn On Cob Dryer (4 Units) Specification: - Heating System Efficiency: Biomass Fuel Indirect Fired : 50% , Minimum - Average Moisture Reduction Rate: 0.25% Per Hour (down To 20% Mc), Minimum - Dried Corn Shall Have No Additional Discoloration, Traces Of Unburned Fuel Or Ashes On Corn Surface And Fermente Or Musty Smell - Final Moisture Content: 20% Mc - System Operation: Batch Type - Load Capacity: 100 Mt Capacity With 4 X 25 Mt Drying Bins - Minimum Components: Drying Bin, Fan/blower, Heating System, Control Panel - With Intake Pit, Floor Level Construction - With Belt Conveyor (feeding, Loading, Distribution) - With Provision Of Steel Ladder For Repair And Maintenance - With Biomass Furnace (indirect Fired, Made Of Refractory Bricks) - With Heat Exchangers (fire Tubes) B. Corn Sheller (3 Units) Specification: - Prime Mover: 10 Hp Electric Motor Or A Sum Of Hp Motors, Minimum - Capacity: 6mt/hr @ 18-20% Mc, Minimum - Shelling Recovery: 97%, Minimum - Shelling Efficiency: 99.5%, Minimum - Losses: > Blower: 1%, Maximum > Separation: 1%, Maximum > Unshelled: 0.5%, Maximum - Purity: 98%, Minimum - Mechanically Damage (broken) Kernel: 3% Maximum - Cleaning Component: Fan, Blower And Sifter - With Conveyor (belt Type) 10,000 Kg/hr Capacity, Minimum - With Individual Grain Elevator - With Provision Of Steel Ladder For Repair And Maintenance C. Grain Dryer (lsu Type) (3 Units) Specification: - Type: Recirculating, Vertical - Load Capacity: 14 Mt Shelled Corn At 20%, Minimum With Individual Biomass Furnace - Moisture Gradient: 2%, Maximum - Drying Rate: 2% Per Hour - Craked Kernel/grain: 10%,maximum - Drying Efficiency: 75%, Minimum - Heating System Efficiency: Biomass Fuel Indirect Fired : 50% , Minimum - Blower Flow Rate: 0.05 Cmm/kg - Static Pressure: 25 Mm H2o - Dust Collecting System: Centrifugal Aspiration Fan - With Accessories: > Provided With Dust Collection System > With During Air Grain Temperature Display > With Built0in Moisture Meter > With Belt Conveyor (loading, Distribution) > With Viewing Window For Every Module - With Centralized Panel For Switches/control Of Grain Drying Temperature, Pressure, Voltage And Current - With Provision Of Steel Ladder For Repair Maintenance - With Bucket Elevator - With Biomass Furnace (indirect Fired, Made Of Refractory Bricks) - With Heat Exchangers (fire Tubes) - With Bagging Bin 12 Tons Capacity, Minimum - With Digital Weighing Scale - With Provision Of Platforms - With Auger Type Conveyors And Thermostat On Furnace For All Dryers D. Electrical Control Panel System (1 Unit) - Provision Of Electrical Control Panel For Corn Processing Facility Compatible To The Equipment E. Electric Bagger Sewer (1 Unit) - Electric Operated - With Direct Driven Fan Motor - With Dust Proof Housing And Permanently Lubricated Bearing - Conversion Two-thread Double Locked Stitch Into Single Thread Chain Stitch Andvice Versa - Speed, 1,200 Sitch Perm Minute (spm), Minimum - Stitch Length: 3 Stitch Per Inc (spi), Minimum - Weight: 6-8 Kilograms With Thread - For Agrisultural Products Use F. Transformer (3 Units) - 100 Kva, Minimum With Accessories And Tools - One Set Socket Wrench (no. 8-32, Minimum) - One (1) Set Combination Wrench, (open End And Box Type, 10 Pcs Of Different Sizes, Size Must Be Appropriate To The Components Of Feed Mill - Adjustable Wrench: 300 Mm, Minimum - Electrical Pliers: 200 Mm, Minimum - Mechanical Pliers: 200 Mm, Minimum - Grease Gun: 100 Cc, Minimum - Screwdriver: Philips And Flat Head, 300 Mm, Minimum - With Toolbox That Can Accommodate All Tools Listed Above - With One (1) Unit Grain Moisture Meter (compatible For Corn) Other Requirements - All Moving And Rotating Components Of The Cpf Must Be Covered - All Components Shall Have Names / Markings / Directions (written In English Comprehensive) Including Buttons - Materials Shall Be All Brand New - With Ease Of Access Maintenance, Repair And Monitoring Works For All Components And Parts Of The Corn Post Harvest Facility - Units Must Bear Da Logo (10 Inches In Diameter, Metal Plated And Revited) - Specifications Must Be Signed And Sealed By Rpabe With Valid Prc And Ptr - Should Have Service Center And Trained Technicians Within The Region - No Reported Major Breakdowns For Products Under Warranty In The Last Two Years - Repair Of Defective Units And Provision Of Other Sales Services Within 72 Hours Upon Receipt Of Complaint/s - The Technician/s Of The Mfaddies And Its Accredited Service Center Must Have Tesda National Certificate Ii (ncii) Relevant To The Job Or An In House Training - Warranty: One (year Warranty On Parts And Services) - Supplier Must Submit A Copy Of Their Amtec Test (system Test Application Upon Bidding) - Supplier Shall Conduct Operations And Maintenance Training To The Recipients - The Supplier Must Have A Resident Mechanical Engineer To Supervise The Installation Of The Components - Project Duration: 150 Calendar Days - Project Location: Brgy. Camansi, Alamada, Cotabato - Cost Of Bidding Documents: P25,000.00 Line Item No. 3: Supply, Delivery, Installation And Commissioning Of Feed Mill Equipment Abc: P5,875,000.00 A. Dry Feed A. Hammer Mill (1 Unit) Specification: - - Prime Mover: 15 Hp , Electric Motor, Minimum - Milling Capacity: 600 Kg/hr., Minimum - Milling Mechanism: Swinging Type - With Accessories > One (1) Spare Hammer > Collecting Bin For Dicharge Outlet Including Dust Collection System - Noise Level: 96 Db (a), Maximum - With Gear Box Rpm Reducer B. 3-decker Horizontal Feed Mixer With Elevator (1 Unit) Specification: - Prime Mover: 7.5 Hp , Electric Motor, Minimum - Mixing Rate: 2,000 Kg/hr, Minimum - Mixing Drum Position: Horizontal - Mixing Blade: Ribbon Type Type: Batch - No Clogging In The Mixing Chamber - Noise Level: 96 Db (a), Maximum - With Bucket Elevator With 2hp Ac Motor, Minimum - With Batching, Mixing And Discharge Chambers B. Wet Feed A. 1-decker Horizontal Feed Mixer With Elevator (1 Unit) Specification: - Prime Mover: 5 Hp , Electric Motor, Minimum - Mixing Rate: 300 Kg/hr, Minimum - Mixing Drum Position: Horizontal - Mixing Blade: Ribbon Type Type: Batch - No Clogging In The Mixing Chamber - Noise Level: 96 Db (a), Maximum - With Gear Box Rpm Reducer B. Feed Pellet Mill (1 Unit) Specification: - Pelleting Efficiency: 92%, Minimum - Pelleting Recovery: 95%, Minimum - Pellets Diameter's Cofficient Of Variation: 7%, Maximum - Prime Mover: 6 Hp, Electri Motor, Minimum - Capacity: 100 Kgs/hr, Minimum With Adjustable Die Hole Diameter - Type Of Die: Flat - Pelleting Mechanism: Die Rotating Flat Die Pellet Mill - Power Transmission System: V Belt And Pulley - Roller: Hjelical Closed-end Corrugated Roller - Mounted On A Steel Base Structure - Wuth Replaceble Die, At Least Three (3) Sets - With Wpo Gear Reducer, Direct Coupled With Accessories: A. Rotary Recirculating Dryer Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Heat Source: Lpg Heat From Existing Cooker Type: : Direct-fired - With Bucket Elevator B. Belt Conveyor Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Length : 2.0 M, Minimum C. Oscillating Screen Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min C. Double Ribbon Screw Conveyor Cooker/heater (1 Unit) Specification: - Prime Mover: 3 Hp, Electric Motor, Minimum - Capacity 50 Kgs/hr, Min - Length : 2.0 M, Minimum E. Electric Bagger Sewer (1 Unit) - Electric Operated - With Direct Driven Fan Motor - With Dust Proof Housing And Permanently Lubricated Bearing - Conversion Two-thread Double Locked Stitch Into Single Thread Chain Stitch Andvice Versa - Speed, 1,200 Sitch Per Minute (spm), Minimum - Stitch Length: 3 Stitch Per Inc (spi), Minimum - Weight: 6-8 Kilograms With Thread - For Agricultural Products Use F. Transformer (1 Unit) - 37.5 Kva, Minimum Other Requirements - All Moving And Rotating Components Of The Cpf Must Be Covered - All Components Shall Have Names / Markings / Directions (written In English Comprehensive) Including Buttons - Materials Shall Be All Brand New - With Ease Of Access Maintenance, Repair And Monitoring Works For All Components And Parts Of The Corn Post Harvest Facility - Units Must Bear Da Logo (10 Inches In Diameter, Metal Plated And Revited) - Specifications Must Be Signed And Sealed By Rpabe With Valid Prc And Ptr - Should Have Service Center And Trained Technicians Within The Region - No Reported Major Breakdowns For Products Under Warranty In The Last Two Years - Repair Of Defective Units And Provision Of Other Sales Services Within 72 Hours Upon Receipt Of Complaint/s - The Technician/s Of The Mfaddies And Its Accredited Service Center Must Have Tesda National Certificate Ii (ncii) Relevant To The Job Or An In House Training - Warranty: One (year Warranty On Parts And Services) - Supplier Must Submit A Copy Of Their Amtec Test (system Test Application Upon Bidding) - Supplier Shall Conduct Operations And Maintenance Training To The Recipients - The Supplier Must Have A Resident Mechanical Engineer To Supervise The Installation Of The Components - Project Duration: 30 Calendar Days - Project Location: Brgy. Camansi, Alamada, Cotabato - Cost Of Bidding Documents: P10,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance E. Pcab License 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature

Details: Public Notice The City Of Kenner (kenner) Is Soliciting The Submittal Of Statement Of Qualifications (soq’s) From Persons Or Firms Interested And Qualified To Provide Professional Architectural And Engineering Services For The Design, Construction Administration And Supplemental Services Relating To One 4-6 Story High Or Two 2-3 Story High Government Office Buildings With Proper Ground Level Parking, Drainage, Sewer/water, Lighting, Landscaping, Etc… Requirements.. General Information The General Location Of The Project Site Is To Be The West Side Of Williams Blvd. (la-49) In The Vicinity Of West Metairie Ave. The Site Is Where The Old City Hall Complex Existed Before Several Buildings Sustained Significant Irreparable Damage During Hurricane Ida On August 29, 2021. Within The Project Site, Two (2) Existing Office Buildings Which Are Currently Occupied With City Personnel Will Remain In Place. These Buildings Are Commonly Known As Buildings “c” And The Greenwalt Building. Within The Project Site There Is Also Veterans Park, Which Contains Numerous Decommissioned Military Equipment. Depending On Funding Availability, Kenner Reserves The Right To Relocate Such Equipment Closer To Williams Blvd. And Include Such Relocation Work As Part Of This Project. No Demolition Of Existing Buildings Is Considered To Be Part Of This Project. The Approximate “rough” Square Footage (living Area) For The Proposed Office Buildings Has Been Estimated To Be 44,150 Ft2 . This Would Be A Total Area Whether One 4-6 Story Or Two 2-3 Story Buildings Are To Be Constructed. Kenner Reserves The Right To Make Adjustments To Facility(s) Square Footage And/or Number Of Floors. Persons Or Firms Must Be Familiar With Federal Emergency Management Agency (fema) Rules And Regulations, As Kenner Will Be Receiving Financial Assistance From This Federal Agency. Therefore, The Project Will Be Subject To All Applicable Federal Rules And Regulations. Plans And Specifications Will Be Subject To Review And Approval By Fema, Kenner’s Planning/code Enforcement/public Works Departments, State Fire Marshal’s Office And Fire Department. Plans And Specifications “may” Also Be Subject To Review And Approval By The State Department Of Transportation And Development (dotd) And The Federal Aviation Administration (faa) On The Account Of Facility Being In Close Proximity To A State Route (williams Blvd. – La-49) And Louis Armstrong New Orleans International Airport. In The Event That Permits Are Required From The Dotd And Faa, The Persons Or Firms Selected For The Project Will Be Required To Assist Kenner With The Preparation Of Necessary Permits Documentation. Persons Or Firms Selected Will Be Required To Prepare A Design Rationale Report, Inclusive Of Conceptual Plans/renditions With Recommendations For The Best Approach To Designing The New Facility To Meet The City’s Workflow, General Public And Service Delivery Needs. Such Rationale Report Is To Be Provided Based On Research Of Similar Communities’ Facilities And Best Practices. Rough Estimated Construction Costs Is To Be Provided For Each Conceptual Plan/rendition Provided. At Least One Public Meeting Will Be Conducted To Present To The Public Conceptual Plans/renderings To Gather Public Input. Project May Require Environmental Clearance Documentation/services To Meet Fema Requirements. Kenner Will Seek For Recommendations For Improvements To Reduce The Risks From Damage From Future Disasters, Incorporation Of Energy Efficient Components And Modern Information Technology Practices. Current Rough Estimated Total Budget For The Entire Project Is $5.8m. Kenner Reserves The Right To Reduce The Scope Of Work Of The Project To Accommodate Available Funding. Due To Limited Funds, Project In All Likelihood Will Have To Be Split Into Phases. Kenner Will Be Lobbying For State And Federal Funds For The Project, As It Progresses. Kenner Will Only Enter Into An Agreement/contract With A Firm Or Person Submitting A Statement Of Qualifications As The Prime Firm/person/consultant For The Project. Kenner Will Not Be Entering Into An Agreement With Sub-consultants Specified In The Statement Of Qualifications. Sub-consultants Do Play A Factor Into The Evaluation Criteria Of The Statement Of Qualifications. Kenner Reserves The Right To Select One Or More Persons Or Firms For This Project. Kenner Is An Equal Opportunity Employer. We Encourage Small And Minority Owned Firms And Women's Business Enterprises To Participate In This Solicitation. Agreements Will Only Be Executed After A Funding Source Is Established And Proper Approvals Are Received From Entities Involved With The Financing Of The Project. Compensation Compensation Will Be On An Hourly Rate Basis Or A Fixed Lump Sum Fee Basis Per Individual Work Task, Or A Combination Of Both Depending On Scope And Complexity Of Work. For Hourly Rate Agreements And Tasks, A Maximum Limitation Amount Shall Be Established In The Agreement. Kenner Reserves The Right To Dictate The Method Of Payment. For Hourly Rate Agreements/tasks, The Consultant Shall Be Compensated On The Basis Of A Reasonable Certified And Itemized Salary Cost Plus An Acceptable Fee To Cover Overhead Cost And Profit. Kenner Reserves The Right To Establish Maximum Direct And Payable Hourly Rates Based On Personnel Classifications. Compensation For Design And Construction Administration Services (basic Services) Is To Be Provided On A Lump Sum Fee Basis Based On The Following Schedule/components Of Payments: Preliminary Phase – 25% Of Lump Sum Fee Design Phase – 50% Of Lump Sum Fee Bidding Phase – 5% Of Lump Sum Fee Construction Phase – 15% Of Lump Sum Fee Record Drawing Phase – 5% Of Lump Sum Fee Duties Included/covered Under Each Of The Phases Mentioned Above Shall Be Negotiated With The Selected Firm/person And Shall Be Mutually Agreeable To Both Parties. As A Minimum, This Project Is Expected To Require The Following Supplemental Services, Which May Require The Use Of Sub-consultants: Surveying Services Geotechnical Services Traffic Engineering Services Environmental Clearance Services Landscape Architectural Services Electrical Engineering Services For Site Lighting Requirements Notes: -the Need For Any Additional Supplementary Services Required For This Project (other Than The Ones Presented Above) Will Be Considered With Proper Justification. -project Will Not Require Resident Inspection And Testing Of Construction Materials Services. Kenner Reserves The Right To Select Proper Firms For These Services At Proper Time. -supplementary Services Work Tasks Can Be Performed By Qualified Personnel Within The Firm/person Staff Or Via The Use Of Sub-consultants. -the Preparation Of A Design Rationale Report Will Be Required For This Project. Payment For Such Report Is To Be Made On A Lump Sum Or Hourly Rate Basis. Kenner Reserves The Right To Establish Method Of Payment. -all Sub-consultants Listed In The Soq Submitted By The Firm/person Must Submit A Statement Of Qualifications (soq) In Professional Services Evaluation Committee Format. All Fees Shall Be Negotiated With The Person/firm And Shall Be Mutually Agreeable To Both Parties. In The Event That Kenner And Person/firm Cannot Reach An Agreement On Project (professional Services) Fees, Kenner Reserves The Right To Select Another Person/firm For The Project. All Costs Associated With The Project Shall Be Subject To The Approval Of The Mayor, Kenner Council And Any Entities Involved With The Financing Of The Project. “minimum” Requirements For Selection The Persons Or Firms Under Consideration Shall Have A Least One Principal Who Is A Licensed/registered Architect Or Professional Engineer In The State Of Louisiana. A Subcontractor/sub-consultant May Not Be Used To Meet This Requirement. The Persons Or Firms Under Consideration Shall Have A Professional In Charge Of The Project Who Is A Licensed, Registered Architect Or Civil Engineer In The State Of Louisiana With A Minimum Of Five (5) Years Of Experience. Professional Experience Indicates Architectural/engineering Work Performed With A Professional Architectural/engineering License. A Subcontractor/sub-consultant May Not Be Used To Meet This Requirement. The Persons Or Firms Under Consideration Shall Have At Least One (1) Employee Who Is A Licensed, Registered Architect And Civil Engineer In The State Of Louisiana, With A Minimum Of Five (5) Years Of Experience In The Planning And Design Of Local Government Facilities. Personnel Envisioned Being Required For This Project Is As Follows: -architect -electrical Engineer -mechanical Engineer -structural Engineer Professional Architectural/engineering Experience Indicates Architectural/engineering Work Performed With A Professional Architectural/engineering License. A Subcontractor/sub-consultant May Meet This Requirement. -the Persons Or Firms Under Consideration Must Also Employ A Full-time Supporting Technical And Clerical Staff. Insurance Requirements Upon Selection For A Particular Project, Successful Firm(s) Shall Provide Insurance Certificates In Accordance With Kenner's Insurance Requirements For Professional Service Agreements, Attached To This Soq. Evaluation Criteria The Following Criteria Listed In Order Of Importance Will Be Used To Evaluate Each Person Or Firm Submitting A Statement Of Qualifications: 1)professional Training And Experience Both Generally And In Relation To The Type And Magnitude Of Work Required For The Particular Project, Including Experience With Fema Funded Projects- 60 Points Maximum 2)capacity For Timely Completion Of The Work, Taking Into Consideration The Person's Or Firm's Current And Projected Workload And Professional And Support Manpower- 50 Points Maximum 3)size Of The Firm Based On The Number Of Personnel, As Related To Project Requirements And/or Scope And Complexity Of Project - 25 Points Maximum 4)past Performance By The Person Or Firm On Public Contracts; Including Any Problems With Time Delays, Cost Overruns, And/or Design Inadequacies In Prior Projects For Which Said Person Or Firm Was Held To Be At Fault, As Evidenced By Documentation Provided By The Administration - 30 Points Maximum 5)prior Successful Completion Of Projects Of The Type And Nature Of The Architectural/engineering Services, As Defined, For Which Firm Has Provided Verifiable References. – 20 Points Maximum 6)demonstration Of Experience In Resiliency, Cost Effective Hazard Mitigation, Green Energy Efficient And Modern Information Technology Practices And Principles That Can Reduce The Risks From Future Disasters And Be Implemented Under Fema’s Hazard Mitigation 406 And Alternative Procedures 428 Plan – 15 Points Maximum All Firms (including Sub-consultants) Must Submit A Statement Of Qualifications (soq) In Professional Services Evaluation Committee Format. Interested Firms Must Submit One (1) Original, Five (5) Copies And A Digital Copy On A Flash Drive For This Statement Of Qualifications To The Office Of Finance, City Of Kenner, 1610 Reverend Richard Wilson Drive, Building D, Kenner, La 70062 No Later Than December 11th, 2024 At 10:00 Am. Packets Can Also Be Submitted Electronically Via Www.centralauctionhouse.com. No Submittals Will Be Accepted After This Deadline. Any Inquiries Regarding This Soq Should Be Sent In Writing To Fincontracts@kenner.la.us No Later Than Five (5) Working Days Before Deadline Submission. Kenner Reserves The Right To Reject Any And All Submissions. Michael J. Glaser Jose Gonzalez Mayor Chief Administrative Officer City Of Kenner City Of Kenner Soq No. 24-6849 Adv. The Advocate November 6th, 2024 November 13th, 2024 November 20th, 2024