Fire Extinguisher Tenders

Details: Description Invitation To Bid Pb-01-2025 Supply And Delivery Of Technical Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools 1. The Department Of Education, Schools Division Of Ilocos Sur Through The Republic Act No. 11975 – Fy 2024 Gaa (sub-allotment Release Order No. Roi-24-1175) Intends To Apply The Sum Of Two Million Three Hundred Thirty Six Thousand Two Hundred Eighty Pesos (p2,336,280.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Supply And Delivery Of Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools. Bids Received Higher Than The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Project Description Qty. Unit Unit Cost Abc For The Project (in Php) Tvl Tools & Equipment (bread And Pastry Production) 1 Air Compressor With Airbrush Cake Decorating Set (medium) Pc 1 2,414.00 2,414.00 2 Beater (standard) Pc 6 287.00 1,722.00 3 Board, Chopping, 6 Color Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Set 6 920.00 5,520.00 4 Boiler, Double (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) Set 1 1,955.00 1,955.00 5 Bowl, Mixing (6 Pcs/set) Pc 12 2,415.00 28,980.00 6 Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 Pc 6 1,725.00 10,350.00 7 Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tiers Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3: 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Pc 6 1,725.00 10,350.00 8 Cake Turn Table (body Shape: Circular Material: Cast Aluminum Plate. And Cast-iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm) Pc 3 1,265.00 3,795.00 9 Coupler (tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case) Pc 13 207.00 2,691.00 10 Cup, Measuring (for Solid) The Standard 4 Measuring Cup Sizes Are: 1 Cup, 1/2 Cup, 1/3 Cup And 1/4 Cup Set 12 977.00 11,724.00 11 Cup, Measuring, 250 Ml For Liquid Pc 12 632.00 7,584.00 12 Cup, Measuring, 500ml For Liquid Pc 12 747.00 8,964.00 13 Cutter, Dough (stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length: 15 Cm X Width: 11 Cm X Thickness: 1.2mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) Pc 1 402.00 402.00 14 Cutter, Pie (medium) Pc 6 460.00 2,760.00 15 Flour Sifter, Hand Cranked (standard) Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh #30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Pc 6 747.00 4,482.00 16 Grater 4 Sided (s) Pc 6 402.00 2,412.00 17 Knife, Kitchen (s) Pc 6 747.00 4,482.00 18 Knife, Pallet (s) Pc 6 573.00 3,438.00 19 Ladle, 3 0z Pc 6 241.00 1,446.00 20 Loaf Pan Big Pc 6 862.00 5,172.00 21 Loaf Pan, Medium Pc 6 517.00 3,102.00 22 Loaf Pan, Small Pc 6 126.00 756.00 23 Muffin Pan, Big Pc 6 448.00 2,688.00 24 Muffin Pan, Medium Pc 6 414.00 2,484.00 25 Muffin Pan, Small Pc 6 322.00 1,932.00 26 Pie Pan, 10 Inches Diameter Pc 6 517.00 3,102.00 27 Pie Pan, # 6, #8, #10 Set 6 1,265.00 7,590.00 28 Pillars, Cake (big) Pc 6 517.00 3,102.00 29 Piping Bag (100 Pcs Per Pack) (m) Pack 25 241.00 6,025.00 30 Rectangular Pan, (7” X 11”) Pc 4 263.00 1,052.00 31 Rolling Pins (3cm X 10 Cm) Pc 12 402.00 4,824.00 32 Rubber Scraper (m) Pc 12 207.00 2,484.00 33 Sauce Pan 22cm Pc 13 632.00 8,216.00 34 Sheet Pan (m) Pc 15 517.00 7,755.00 35 Spoon, Measuring (plastic) ¼ Teaspoon, ½ Teaspoon, 1 Teaspoon, And 1 Tablespoon Set 26 287.00 7,462.00 36 Spoon, Wooden (s) Pc 15 92.00 1,380.00 37 Strainer Stainless (m) Pc 15 212.00 3,180.00 38 Tip, Decorating X 24 (small To Large) Set 23 632.00 14,536.00 39 Weighing Scale, 10 Kgs (digital) Pc 13 2,875.00 37,375.00 40 Weighing Scale,5 Kgs, (digital) Pc 13 1,265.00 16,445.00 41 Wire Whisk, Medium Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Pc 13 286.00 3,718.00 Sub Total 259,851.00 Tvl Tools & Equipment (computer System Servicing) 42 Allen Wrench (set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm;) Set 50 450.00 22,500.00 43 Anti-static Device (anti-static Wrist Strap) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor Pc 50 250.00 12,500.00 44 Combination Pliers, 8" Pc 50 350.00 17,500.00 45 Crimping Tool (rj 11/45) Pc 52 450.00 23,400.00 46 Desoldering Pump (plastic Or Aluminum Housing) Pc 52 250.00 13,000.00 47 Electric Drill, Portable (rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts) Pc 4 4,000.50 16,002.00 48 External Optical Drive Cd-r Dvd-r (interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd) Pc 6 1,000.00 6,000.00 49 Flash Drive (1tb) Pc 52 850.00 44,200.00 50 Flashlight, Head-mounted (rechargeable) Minimum Of 160 Lumens; Beam Distance: Minimum Of 150 Meters; Includes 220 V Ac Charger/power Adaptor (or Equivalent) Pc 50 550.00 27,500.00 51 Hub / Switch ( Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix External Power Supply Adapter: 100-240vac,50/60hz Fanless Data Rates: 10/100mbps At Half Duplex; 20/200mbps At Full Duplex Led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 Dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) Pc 42 2,000.00 84,000.00 52 Lan Cable Tester (1. Package Contents: 8-port 10/100mbps Desktop Switch, Power) Pc 50 252.00 12,600.00 53 Long Nose Pliers, 8" Pc 50 200.00 10,000.00 54 Multimeter, Digital (auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5 Pc 40 800.00 32,000.00 55 Patch Panel (48 Ports) Cat6 Cable Material: Abs Plastic Application: Utp(unshielded) Certification: Rohs, Iso, Ce Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) Transport Package: 1pcs/box Pc 50 2,500.00 125,000.00 56 Pc Video Camera (5.0 Mega Pixel Web Camera, Usb-type; With Microphone For Laptop And Desktop Pc Use; Resolution: At Least 640 X 480; Support Windows Xp/7/8/equivalent Mac Os Or Later Versions) Pc 20 500.00 10,000.00 57 Phillip’s Screwdriver, 8" Insulated Pc 50 250.00 12,500.00 58 Precision Screwdriver Set (1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1; 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet; Plastic Storage Case;) Set 50 500.00 25,000.00 59 Soldering Iron, 60w Pc 50 250.00 12,500.00 60 Standard Screwdriver (flat), 8” Insulated Pc 50 250.00 12,500.00 61 Uninterruptible Power Supply (ups) Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof Voltage: Nominal Input Voltage: 230v, 50/60hz Output Power Capacity: 600va (minimum) Pc 40 4,000.00 160,000.00 62 Usb External Hd 1tb Pc 10 3,500.00 35,000.00 63 Wire Stripper (10 Awg To 24 Awg Length: 7 Inches (minimum) Pc 54 250.00 13,500.00 64 Wireless Access Point ( Access Point Dual Band Wi-fi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) Pc 50 1,500.00 75,000.00 Subtotal 802,202.00 Tvl Tools & Equipment (cookery) 65 Apple Corer (material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Pc 10 444.00 4,440.00 66 Bain Marie, Table ( Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 4 20,700.00 82,800.00 67 Blender, Electric (material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220volts/ 240volts, 50hz/ 60hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades) Pc 4 2,875.00 11,500.00 68 Board, Chopping/cutting, Plastic (board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) Pc 20 289.00 5,780.00 69 Boiler, Double (stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Sides Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 3 Liters (minimum) Pc 2 2,128.00 4,256.00 70 Braising Pan, Medium Pc 10 1,494.00 14,940.00 71 Can Opener (stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Pc 4 242.00 968.00 72 Casserole, Medium Pc 10 702.00 7,020.00 73 Casserole, Small Pc 12 669.00 8,028.00 74 Colander, Medium Pc 10 340.00 3,400.00 75 Colander, Small Pc 10 303.00 3,030.00 76 Cup, Measuring (for Solid) (cup, 1/2 Cup, 1/3 Cup, 1/4 Cup And 1/8 Cup.) Set 10 518.00 5,180.00 77 Dispenser, Paper Towel (abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Pc 10 403.00 4,030.00 78 Stand Fan, Electric (metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220/240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Pc 5 1,495.00 7,475.00 79 Fire Extinguisher (with Contents) Capacity 5 - 6 Kgs Rechargeable Cylinder Metal Working Pressure Of Cylinder : 400 Psi Pc 1 2,875.00 2,875.00 80 Fish Poacher, Medium (oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm) Pc 10 2,076.00 20,760.00 81 Fork, Carving (square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prongs Comes With Square - Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle) Pc 10 593.00 5,930.00 82 Fork, Kitchen (body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End Pc 10 248.00 2,480.00 83 Frying Pan, Large Pc 10 438.00 4,380.00 84 Frying Pan, Medium Pc 10 334.00 3,340.00 85 Frying Pan, Small Pc 12 296.00 3,552.00 86 Funnel, S/s, Medium Pc 10 242.00 2,420.00 87 Funnel, S/s, Small Pc 10 207.00 2,070.00 88 Garbage Bin (material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel) Pc 4 863.00 3,452.00 89 Glass Rack (body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 ½ Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case ) Pc 12 817.00 9,804.00 90 Ice Cream Scooper (medium) Pc 2 288.00 576.00 91 Knife, Boning (28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets) Pc 10 564.00 5,640.00 92 Knife, Chef (chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) Pc 10 449.00 4,490.00 93 Knife, Cleaver (forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets) Pc 10 552.00 5,520.00 94 Knife, Oyster (stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) Pc 10 547.00 5,470.00 95 Light, Emergency (metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector ) Pc 1 2,013.00 2,013.00 96 Meat Slicer (die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 10 3,220.00 32,200.00 97 Pastry Tube (standard) Pc 10 633.00 6,330.00 98 Peeler, Y-type (stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Pc 10 275.00 2,750.00 99 Pepper And Salt Mill (round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices) Pc 10 1,380.00 13,800.00 100 Piping Bag (transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) Pc 10 242.00 2,420.00 101 Plate Rack (body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) Pc 12 2,099.00 25,188.00 102 Preparation Table With Sink (stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) Pc 10 4,485.00 44,850.00 103 Pressure Cooker (polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring) Pc 2 5,520.00 11,040.00 104 Roasting Pan (medium) Pc 10 1,840.00 18,400.00 105 Scissor, Kitchen (body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) Pc 10 448.00 4,480.00 106 Siever, Small (stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Pc 10 677.00 6,770.00 107 Skimmer, Fine (stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Pc 10 758.00 7,580.00 108 Skimmer, Spider (stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm(minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Pc 10 472.00 4,720.00 109 Soup Cup Rack (polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm) Pc 12 1,553.00 18,636.00 110 Soup Ladle, 12 Oz Pc 10 472.00 4,720.00 111 Soup Ladle, 3 Oz Pc 10 300.00 3,000.00 112 Soup Ladle, 6 Oz Pc 10 403.00 4,030.00 113 Soup Ladle, 8 Oz Pc 10 455.00 4,550.00 114 Spatula (stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches) Pc 8 294.00 2,352.00 115 Spoon, Kitchen (stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type) Pc 8 403.00 3,224.00 116 Spoon, Kitchen (slotted) Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Pc 8 386.00 3,088.00 117 Spoon, Measuring (body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. (7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) Set 8 291.00 2,328.00 118 Spoon, Parisienne Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Pc 8 301.00 2,408.00 119 Spoon, Serving (stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Pc 24 365.00 8,760.00 120 Spoon, Wooden Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Pc 8 92.00 736.00 121 Stock Pot, Large (stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. Pc 5 2,703.00 13,515.00 122 Strainer Chinois, Small Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Pc 5 380.00 1,900.00 123 Strainer Chinois, Medium (stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Pc 5 420.00 2,100.00 124 Strainer Medium, Fine Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Pc 8 248.00 1,984.00 125 Strainer Small, Fine Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Pc 8 240.00 1,920.00 126 Tenderizer, Medium Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Pc 8 559.00 4,472.00 127 Thermometer, Pocket /pin Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f Pc 10 880.00 8,800.00 128 Tong, 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 10 322.00 3,220.00 129 Tong, 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Pc 10 291.00 2,910.00 130 Tray, Baking, Small Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Pc 10 548.00 5,480.00 131 Tray, Utility Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Pc 12 644.00 7,728.00 132 Turner 3" X 6" Pc 10 541.00 5,410.00 133 Utility Cart Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Pc 2 14,713.00 29,426.00 134 Weighing Scale, 1 Kg, Digital Engineering Plastic And Stainless-steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm) 163 Mm X 245 Mm X 79 Mmm (minimum) Pc 6 1,630.00 9,780.00 135 Weighing Scale, 5 Kg Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Pc 10 1,794.00 17,940.00 136 Wire Skimmer, Small Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Pc 10 408.00 4,080.00 137 Wire Whisk, Heavy Duty: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Pc 2 564.00 1,128.00 138 Wire Whisk, Medium Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 488.00 4,880.00 139 Wire Whisk, Small Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 372.00 3,720.00 140 Wok, Medium: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Pc 10 771.00 7,710.00 141 Wok, Small Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Pc 10 679.00 6,790.00 142 Working Table Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Pc 5 13,628.00 68,140.00 143 Zester Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe Pc 10 397.00 3,970.00 Sub Total 702,982.00 Tvl Tools & Equipment ( Food And Beverages Services) 144 Chair, Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box Pc 50 1,955.00 97,750.00 145 Coffee Pot, 2 Pints Round Material: Stainless Steel With Cover Capacity: 2 Pints Outside Diameter: 90 -110 Mm Over-all Height: 200 - 230 Mm Thickness: 0.5 - 1 Mm Pc 4 1,139.00 4,556.00 146 Container, Creamer Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height: 80 - 105 Mm Color: White Pc 10 288.00 2,880.00 147 Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality Packed In Carton Box Pc 24 403.00 9,672.00 148 Fork, Cocktail Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Type: Rounded Tip Handle Over-all Length: 110 - 165 Mm Width: 20 - 30 Mm (minimum) Handle Thickness: 2 Mm To 4 Mm Handle Length: 75 - 90 Mm Small, Colo: Silver The Item Must Be Branded And Have Good Quality. Pc 24 173.00 4,152.00 149 Fork, Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150 Mm - 175 Mm Width: 20 – 30mm Handle Thickness: 1.5mm - 3 Mm Number Of Tines: 4 Handle: 130 Mm (minimum) Color: Silver Pc 24 173.00 4,152.00 150 Fork, Dinner Fork Body Shape: Fork Shape Material / Appearance: Stainless Steel, Highly Polished, With 4tines Over - All Length: 120 - 175 Mm Thickness Of Handle: 2 - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality Pc 24 196.00 4,704.00 151 Fork, Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180 - 215 Mm Fork Width: 1.5 Mm - 3 Mm Fork Thickness: 1 Mm - 2 Mm Number Of Tines: 4 Length Handle: 120 - 130 Mm Handle Thickness: 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Pc 24 288.00 6,912.00 152 Fork, Oyster (4 To 5-1/2 Inches In Overall Length.) Pc 24 173.00 4,152.00 153 Glass, Champagne Flute Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Pc 24 288.00 6,912.00 154 Glass, Collins Tumbler Body Shape: Round Material: Clear Glass Capacity: 10 Oz To 14 Oz Thickness: 1.5 -3 Mm (minimum) Packed In Carton Box Pc 24 173.00 4,152.00 155 Glass, Juice / Hi- Ball Material: Clear Glass Type: Hi-ball Height: 140 - 160 Mm Bottom Diameter: 50 -70 Mm Top Diameter: 50 - 70 Mm Thickness: 2 - 4 (minimum) Capacity: 8 Oz. To 10 Oz. Dishwasher Safe The Item Must Be Branded And Good Quality Pc 24 518.00 12,432.00 156 Glass, Pilsner (iced Tea Glass) Type: Flared Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass: 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality Pc 24 288.00 6,912.00 157 Glass, Red Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity: 250 -300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 85 - 90 Mm Base Diameter: 75 - 85 Mm Base Thickness: 2 - 4 Mm Pc 24 403.00 9,672.00 158 Glass, White Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 - 3 Mm Over -all Length: 200 -220 Mm Capacity: 270 - 300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 75 - 85 Mm Base Diameter: 70 - 80 Mm Base Thickness: 2 - 5 Mm Pc 24 443.00 10,632.00 159 Gravy Boats Boat Shape With Handle Material: Stainless Steel Capacity: 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Pc 4 225.00 900.00 160 Ice Bucket, 2 Liters With Tongs Circular Set Includes: Ice Bucket Material: Stainless Steel Diameter: 140 - 180 Mm Height: 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity: 2 Liters (minimum) Pc 5 471.00 2,355.00 161 Knife, Butter Stainless Steel W/ Highly Polished Appearance Over-all Length: 140 Mm - 150 Mm Handle Thickness: 3 Mm - 5 Mm With Dull Edge And Rounded Tip Pc 24 127.00 3,048.00 162 Knife, Dinner Flat With Round Tip Material / Appearance: Stainless Steel Blade Highly Polished Handle Material: Stainless Steel Overall Length: 160 - 190 Mm Blade Thickness: 2 - 4 Mm Handle Thickness: 3 - 6 Mm Pc 24 213.00 5,112.00 163 Knife, Fish Flat With Pointed Tip Material / Appearance: Stainless Steel, Highly Polished W/ Plain Design Overall Length: 200 - 220 Mm Width Blade: 20 - 25 Mm Thickness Of Blade: 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 164 Menu Folder (a4 (297mm X 210 Mm) And A5 (210 Mm X 148 Mm) Pc 5 518.00 2,590.00 165 Napkin Holder Rectangular Material: Stainless Steel With Highly Polished Appearance Dimension: Width: 70 - 90 Mm X Length : 150 - 170 Mm Thickness: 0.7 Mm -2 Mm Packed In Plastic Pouch Pc 6 247.00 1,482.00 166 Order Pads Rectangular Material: 80gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Pc 5 58.00 290.00 167 Pepper And Salt Mill: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Pc 20 1,380.00 27,600.00 168 Plate Covers Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Pc 8 305.00 2,440.00 169 Plate, Dessert, 7”to 8” Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color: White Inner Diameter: 145 To 165 Mm Thickness: 3 To 6 Mm Pc 24 207.00 4,968.00 170 Plate, Dinner, 10” Circular Material: Porcelain With No Design Color: White Inner Diameter: 200 Mm - 215 Mm Outer Diameter: 250 - 260 Mm Thickness: 3 Mm - 6 Mm Pc 24 437.00 10,488.00 171 Plate, Fish, 8” To 9” Circular Material: Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color: White Inner Diameter: 165 Mm - 190 Mm(minimum) Thickness: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 172 Round Table (8's) (54” Or 60”) Pc 10 9,034.00 90,340.00 173 Salad Forks (6” Long) Pc 24 127.00 3,048.00 174 Salad Knife 8” Pc 24 207.00 4,968.00 175 Salad Plates 7” To 8” Pc 24 242.00 5,808.00 176 Salt And Pepper Shakers Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Pc 4 207.00 828.00 177 Sauce Ladles Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Pc 10 403.00 4,030.00 178 Server, Cake Stainless Steel Blade, Highly Polished Appearance 2. Over-all Length: 220 To 270 Mm 3. Width: 60 - 80 Mm 4. Thickness: 1.5 Mm To 2 Mm 5. Handle: 120 -140 Mm Long, Non-toxic Plastic 6. Shape: Shovel-shaped 7. Color: Silver Pc 10 571.00 5,710.00 179 Service Forks : Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Pc 6 207.00 1,242.00 180 Service Tray: Rectangular Material: Plastic (pp) Size: 14 Inches X 18 Inches X 1 Inch (minimum) Colo: Any Pc 6 518.00 3,108.00 181 Show/service/ Base Plates 11” To 14” Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Set 6 1,208.00 7,248.00 182 Side Plates Or Bread Plates 6” Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness: 3 Mm - 6mm Pc 24 242.00 5,808.00 183 Side Towels Rectangular Material: Oxford Polyester Soft Cloth Over-all Length: 640 - 680 Mm Over-all Width: 420 -460 Mm Color: Plain White Pc 10 349.00 3,490.00 184 Silver Platter Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Pc 10 570.00 5,700.00 185 Soup Bowl Circular Material: Porcelain Capacity: 24 Oz. (minimum) Pc 24 437.00 10,488.00 186 Soup Ladle Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Pc 10 366.00 3,660.00 187 Soup Tureen Round Material: Stainless Steel Capacity: 7 - 11 Quart Size: 60 X 35 X 32 Cm (minimum) Pc 10 695.00 6,950.00 188 Spoon, Dessert Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length: 175 To 190 Mm Thickness: 2 Mm - 3 Mm Shorter Handle: 120 -130 Mm Color: Silver Pc 24 125.00 3,000.00 189 Spoons, Service Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Pc 6 136.00 816.00 190 Spoons, Soup (cream And Consume) Round Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length: 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Pc 24 160.00 3,840.00 191 Steak Knife (5”) Pc 24 251.00 6,024.00 192 Sugar Container Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Pc 10 288.00 2,880.00 193 Tablecloth, 54 X 54 Inches Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 942.00 9,420.00 194 Tablecloth, 64x64 Inches Rectangular Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 1,208.00 12,080.00 195 Table Napkins, Cloth, 16” X 16” Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Color: Plain White Pc 60 424.00 25,440.00 196 Table Skirting Cloth Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch Pc 10 2,185.00 21,850.00 197 Table, Square/rectangular (4's Or 6's) Square/rectangle Materia: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Pc 4 5,382.00 21,528.00 198 Tea Pot, 2 Pints Porcelain Type Body Shape: Round With Handle And Pouring Spout Material: Porcelain Capacity: (2 Pint) Color: White Pc 10 1,139.00 11,390.00 199 Teaspoon Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Pc 24 92.00 2,208.00 200 Tong, 8 Inches Standard Material: Stainless Steel Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 7 291.00 2,037.00 201 Tooth Pick Holder Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch Pc 10 101.00 1,010.00 202 Tray Stand Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Pc 5 2,282.00 11,410.00 203 Tray, Bill Folders/ Change Height: 190 - 220 Mm 3. Width: 120 -140 Mm 4. Thickness: 2 Mm To 3 Mm (minimum) 5. Color: Black Pc 5 271.00 1,355.00 204 Tray, Round (bar) Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Pc 8 443.00 3,544.00 205 Water Goblet Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Pc 24 124.00 2,976.00 206 Water Pitcher Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Pc 10 516.00 5,160.00 Sub Total 571,245.00 Total Amount 2,336,280.00 2. The Department Of Education, Schools Division Of Ilocos Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days. Bidders Must Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Deped, Schools Division Of Ilocos Sur, And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. Until 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 28-march 18, 2025 (until 9:00 A.m.) From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb Amounting To Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Deped, Schools Division Of Ilocos Sur Will Hold A Pre-bid Conference On March 7, 2025, At 10:00 A.m. At The Schools Division Office, Bantay, Ilocos Sur, And/or Through Videoconferencing/webcasting Via Google Meet Using The Link: Https://meet.google.com/tjb-zntu-yys Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before March 19, 2025, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On March 19, 2025, At 9:01 A.m. At The Given Address Below And/or Through And/or Virtual. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Deped, Schools Division Of Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marillac D. Quinsaat Head – Bac Secretariat Department Of Education, Schools Division Of Ilocos Sur Zone V, Bantay, Ilocos Sur, 2727 Email Address: Ilocos.sur@deped.gov.ph 12. You May Visit The Website/s: For Downloading Of Bidding Documents: Depedilocossur.info Date Of Issue: February 28, 2025 Joye D. Madalipay, Ceso Vi Chairperson, Bids And Awards Committee

Details: Description 1. The Municipality Of Consolacion, Through The General Fund Intends To Apply The Sum Of Twenty-five Million Pesos (p 25,000,000.00) Being The Abc To Payments Under The Contract For Procurement Of Mobile Diagnostic And Dental Clinic For The Municipality Of Consolacion. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Consolacion Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 60cd. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The Pertinent Provisions Of Republic Act (ra) No. 12009 And Its Irr. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Office Of The Municipality Of Consolacion And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On May 19, 2025 To June 9, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (p 25,000.00). 1 May Be Deleted In Case The Abc Is Less Than One Million Pesos (php1,000,000) Where The Procuring Entity May Not Hold A Pre-bid Conference. 6. The Municipality Of Consolacion Will Hold A Pre-bid Conference On May 27, 2025 At 10:00 O’clock In The Morning At The Bac Office Located At The 4th Floor, Municipal Building, Poblacion Oriental, Consolacion, Cebu, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00 O’clock In The Morning, June 9, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On June 9, 2025 At 10:00 O’clock In The Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Consolacion Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Pertinent Provisions Of Ra No. 12009 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Sharon Rose Gigremosa Jakhelene C. Tubin Bac Office 4th Floor, Municipal Building Poblacion Oriental, Consolacion, Cebu 268-3736/239-2371 Bacconsolacion@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: A. Lguconsolacion.gov.ph Or B. Philgeps Website Atty. Paolo Crispino C. Sucalit Bac Chairperson Mobile Diagnostic And Dental Clinic: 20 Feet Length, 7.5 Feet Width, 7.5 Feet Height. Composed Of Galvanized Iron And Aluminum Composite Panel Board. 1 ▪ X-ray Room: Division With Lead Sheets And Viewing Lead Glass. Provided With An Aluminum Composite Panel Division. Print ▪ Workstation For Dr System Room: It Is Provided With A Working Table, A Fixed Drawer, And A Cabinet, As Well As An Aluminum Composite Panel Division. ▪ Exam/ecg/ultrasound Room: This Division Has A Patient Bed, Side Table, Cabinet, And Hanging Cabinet. It Is Provided With An Aluminum Composite Panel Division. ▪ Dental Room: Division With Dental Chair Set, Water Supply. Provided With An Aluminum Composite Panel Division. ▪ Comfort Room: Provided With Toilet Bowl And Exhaust Fan. ▪ Waiting Area: Provided With A Motorized Canopy With 2 Adjustable Chair Stools. I. Vehicle Cab & Chassis • Engine Size (l) 7.8l • Engine Type 4-cylinder Turbocharged, 4 Stroke Intercoolers, Water Cooled, • Cylinder Count 4 • Valve Count 16 • Transmission Type: Manual • No. Of Gears 6 Speed • Drive Type 4x4 • Max Power (hp) 155hp • Max Torque (nm) 419nm • Fuel Type Diesel • Fuel Capacity (l) 200l • Emission Standard Euro 4 • Gross Weight (kg) 11,000kg • Overall Width (mm) 2,200mm • Overall Height (mm) 2,680mm • Overall Length (mm) 8,155mm • Wheelbase (mm) 4,770mm Note: Lto Registration - 3 Years 1-year Vehicle Insurance Warranty: 3 Years Warranty Of The Vehicle Parts Lgu Logo, Color & Designs Public Address System (pa System) Ii. Body Specifications 1. Baby Chassis- C-channel 5” 2. Floor Joist- C-channel 4” 3. Flooring- G.i. Sheets, Phenolic Board, Rubber Vinyl 4. Frames- Bended G.i. Sheets, Tubulars 5. Side Skirts- Bended G.i. Sheets 6. Interior/exterior Walls- Aluminum Composite Panel 7. Roofing- Pre-painted G.i. Sheets 8. Pull Downstairs- Tubulars, Stainless Steel Checkered Plate 9. Swing Door- Tubulars, Aluminum Composite Panel, Fixed Glass Sliding Windows- Extruded Aluminum Profile, Tempered Glass Note: 1 Year Warranty For All Medical Equipments Iii. Medical Equipments X Ray Machine 100ma Iray X10 5. 6kw Portable X Ray Unit With Separate Console Panel Model Parameters Ysx056 Power 5.6kw Power Supply Ac100v~240v/ Dc48v Power Supply 220v/50hz (rated Current ≥16a; Internal Resistance ≤0.20) Ma 5-100 Ma Stepping R'10 Or R20 Mas 0.1--320mas Stepping R'10 Or R'20 Kv 40—125kv Stepping 1kv Exposure Time 1~10000ms X-ray Tube Focus 0.6mm/1.8mm Double Focus Target Angle 15° Anode Heat Capacity 42khu Working Frequency 80-200khz Exposure Mode Hand Brake, Remote Control Lithium Battery Exposure Times (optional) 200times Exposures After Full Charging. Xray Film : 100 Pcs Warning Light: Suitable For Nicu, Icu, Trauma & Ortho Digital Radiography System • Cassette Detector Per Iso 4090, Fits In Bucky 139 Pm Pixel Pitch, With 16-bit Adc For More Image Details, Stable Isync+ Automatic Exposure Detection (aed) • Venu 1717x Is A 17×17-inch, Tethered Cassette-sized Fpd For Radiographic Imaging. It Features A 139 Pm Pixel Pitch With Direct Deposition Csl And With A Reliable Aed, Enabling A Smart Workflow. It Is The Optimal Choice For A High-end Dr System. • Innovative A-si Cassette-size Portable Flat Panel Detector • Technical Specifications Detector Technology Scintillator Active Area (inch) Pixel Matrix Pixel Pitch (μm) Spatial Resolution (ip/mm) Ad Conversion(bit) • Data Transmission Trigger Mode Preview Image Time (s) Full Image Time (s) Dimensions(mm3) Weight (kg) Power Dissipation(w) Operating Temperature (0c) Storage & Transport Temperature With Package (0c) Operating Humidity(% Rh) • Storage & Transport Humidity With Package (% Rh) I Dimensions Venu 1717x • Sucure Ups- 650va • A4tech Krs-8572- Keyboard • Epson Printer Ecotank L121 • Viewpoint 20’’ Led Monitor • Cpu Amd Ryzen 5 High Definition Capability Msi Board Gigabit Lan 8gb Ram 120gb Ssd 1tb Hdd Storage 22" Monitor Epson Temperature (0c) Storage & Transport Temperature With Package (0c) Operating Humidity (% Rh) • Storage & Transport Humidity With Package (% Rh) I Dimensions Venu 1717x • Sucure Ups- 650va • A4tech Krs-8572- Keyboard • Epson Printer Ecotank L121 • Viewpoint 20’’ Led Monitor • Cpu Amd Ryzen 5 High Definition Capability Msi Board Gigabit Lan 8 Gb Ram 120 Gb Ssd 1 Tb Hdd Storage 22" Monitor Epson Printer Ups Diagnostic Ultrasound System 3 Probes (convex, Linear, And Phased Array) Operating System: Linux Platform (stable And Will Not Be Infected By A Virus) Size Maximum: L×w×h(mm): 352mm×378 Mm×114mm Weight Less Than 6.5kg Multiple Beam Processing Required Applications Have A Wide Range Of Applications, Including: Abdominal, Ob/gyn, Cardiology, Urology, Small Parts, Vascular, Orthopedic, Anesthesia, And Msk. Application Icon All The Application Shows In A Unique Icon Monitor: No Less Than A 15.6-inch Lcd Monitor, Widescreen, Anti-flickering, Can Be Vertically Swiveled, High Resolution (1920 X 1080 Pixels) Keyboard: Pc Back Light Keyboard On The Control Panel, With At Least 4 User-defined Keys Monitor And Keyboard Brightness Auto Adjustment: Monitor And Keyboard Brightness Auto Adjustment Wifi Connection: Required (with Portable Wi-fi Provided) Solid State Drive (ssd): Not Less Than 1tb Fast Boot Up: Within 30s Stand By: Required Operation Mode: B Dual B Quad B Pure Inversion Harmonic Imaging (phi) Trapezoid Imaging (linear And Convex) Real-time Panoramic Imaging (b Mode) Panoramic Support In Linear And Convex. Velocity Indicator And Image Rotation. M Pw Cw Hd Zoom Compound Imaging (0,1,2,3,4) U-scan (5 Levels Adjustment) Needle Enhancement ( Vis-needle ) Transducer Socket: 2(1 For Standard/1 For Optional) Active Transducer Connectors, Which Can Support All Transducers. Should Have A Transducer Extender That Can Extend To 3 Sockets. Transducers: Can Supply More Than 7 Transducer Choices, Covering Linear, Convex, Endocavity, Micro-covex, And Intre-operation Probe. Scanning Methods: "electronic Convex Secter Electronic Linear Secter" Clipboard Function: Capture And Review The Archived Images, Support Output The Images And Video To Usb And Dvd In The Scanning Interface. Image Optimization 1: Images Can Be Optimized With One Button In B Mode Image Optimization 2: Images Can Be Optimized With One Button In Pw/cw Mode Tgc: Required Lgc: Required The Zoom Value Can Be Shown. The Minimum Zoom Ratio Can Low To 0.8. The Max Zoom Ratio Can Up To 10. Support Pip. Auto Imt Required Full Screen Zoom Required Biopsy: Support 2 Needle Guide Line And 1-gun Guide Line Warranty: Spare Parts Should Be Provided With System For 18 Months Scanning Parameters B Mode C-field Beam: Focusing On An Area Without Limitation Dynamic Range: At Least 20-200db(probe Dependent) Can Be Adjusted By 20db/step. Gain: 1~255, Adjustable Depth: 30cm Maximum Chroma: Maximum 12 Selectable Frequency: 5 Bands Persistence: 4 Levels Adjustable Grayscale Curve:16 Types Line Density: Can Choose The Lower Line Density For Higher Frame Rate, And Line Density Can Be Adjusted By 3 Levels: Low/med/high U-scan Speckle Reduction Imaging, Adjustable Compound Imaging: Required Live Panoramic Imaging: Required Trapezoidal Imaging: Image Area Extend For Linear Convex Extension: Image Area Extend For Convex Biopsy Guide Function: Required, And The Biopsy Line Adjustable. Imaging Width And Position: Adjustable Tissue Specific Imaging: Provide Different Choices For Tissue Scanning When Scanning In Different Organs Image Optimization By One: Button Required B-steer: Required, At Least The Linear Probe M Mode Sweep Speed: Adjustable, At Least 5 Levels Video Inversion Function: Required Chroma: At Least 12 Types Display Format At Least 5 Types Spectral Doppler Prf "pw: 1~16khz Maximum Velocity Range: Pw: 0.0004~18 M/s Baseline: 9 Steps Frequency: 3 Bands Angle Correction: 0~88-degree, 2 Degree Per Step Or Less Auto Angle Correction: Auto 60 Degree Of Angle Correction By One Button Sample Volume In Pw Doppler: 0.5~24 Mm, Adjustable Sweep Speed Adjustable, At Least 5 Levels Chroma: 12 Types Video Inversion Function: Required Spectrum Inversion: Required Real Time Auto-trace: Required Wall Filter: 5 Levels, Adjustable One-key Auto Optimization: At Least Can Adjust The Baseline, Prf, And Correct Angle Steer Angle: 4 Levels 0, ±8, ±12, ±16 Display Format: 5 Transducer Transducer Warranty: Transducers Are Manufactured By Supplier, And The Warranty Should Last 18 Months Transducer Frequency: Broadband (1.0~16mhz) With Multiple 5 Frequencies Range In B Mode/color Mode/pih Mode/pw Mode/cw/mode Transducer Elements: At Least 128 Linear Transducer: Frequency Range: 4~16mhz Convex Transducer: Frequency Range: 2~15mhz Endocavity Transducer: "frequency Range: 3~15mhz Scanning Angle: 135°" Biopsy Guide: Required Image Storage Cine Loop: Available For All Mode Retrospective Storage: 27s Retrospective Saved In Real Time Prospective Storage: 480s Prospective Saved In Real Time Freeze Storage: Required Image Format: Jpg, Bmp, Tif Clipboard Function: Is Available In Frozen B Mode Clip Format: Wmv, Avi One Key Save: Required Doppler Cine Playback : Speed Is Adjustable, Sound Can Be Played Back Print & Store Region: Full Screen, Image &result Area, Us Image Image Share Service: Required Store To Usb Disk: Required Storage Capability: Hard Disk Can Up To 500g/1t; Ssd Can Up To 128gb Report Tables: Abdominal, Ob/gyn, Cardiology, Urology, Small Parts, Vascular,imt Report Format Txt, Pdf Report Templet: At Least 6 Images Can Be Displayed In Report Measurements Measurement Packages: Abdominal, Ob/gyn, Cardiology, Urology, Small Parts, Vascular, Orthopedic, And Measurement Packages Can Be Chosen For Icon Driven Or All Packages Measurement In B Mode: Distance, Angle, Ratio(distance, Area), Area/circumference(ellipse, Trace),volume(3 Axis/2 Axis) Measurement In M Mode: Distance, Time, Slope, Hr Measurement In Pw Mode: Flow Velocity, Acceleration, Time, Heart Rate, And Has Automatic Measurement Functions Short Cut Key For Obstetrics Measurement: At Least 9 Keys Quick Measurements Measurement Can Be Select By One Button Obstetrics Packages Measurement Items 28 Types, Including Gs, Crl, Bpm, Hc, Ac And Afi. Formula: Users Can Define The Formula By Themselves Fetal Growth Chart Systems Can Display Fetal Growth In A Graph Chart According To Some Measurement Items And Their Ob Tables. Up To 4 Charts Cardiac Packages B Mode: Single-plane Ellipse, Bi-plane Ellipse, Bullit, Simpson M Mode: Cube, Teichholz, Gibson Pw Mode: Real Time Automatic Measurement Ecg Machine 3 Channel -300g, Digital, Automatic Lead: Standard 12 Leads Acquisition Mode: Simultaneous 12 Leads Acquisition Measurement Range: ±5mvpp Input Circuit Floating; Protection Circuit Against Defibrillator Effect Input Impedance: ≥50mω Input Circuit Current: ＜0.05µa Record Mode Automatic:3ch×4+1r,3ch×4,3chx2+2chx3,3chx2+2chx3+1r,6chx2; Manual: 3ch, 2ch, 3ch+1r, 2ch+1r; Rhythm: Any Lead Selectable. Filter Emg Filter: 25 Hz / 30 Hz / 40hz/75 Hz / 100 Hz / 150hz Dft Filter: 0.05 Hz/ 0.15 Hz Ac Filter: 50 Hz / 60hz Cmrr: >100db Patient Leak Current: ＜10µa (220v-240v) Frequency Response: 0.05hz~150hz (-3db) Sensitivity: 2.5mm/mv, 5 Mm/mv, 10 Mm/mv, 20 Mm/mv (error:±5%) Anti-baseline: Drift Automatic: Time Constant:≥3.2s Noise Level: ＜15µvp-p Paper Speed: 12.5 Mm/s, 25 Mm/s, 50 Mm/s Recording Mode: Thermal Printing System Paper Specification Roll 80mmx20m Normal: 1000sps/channel Power Supply Ac: 100~240v, 50/60hz, 30va~100va Dc: 14.8v/2200mah, Built-in Lithium Battery Semi-auto Blood Chemistry Analyzer 1. End Point, Kinetic, Fixed Time, Rate, Etc. 2. Filter Wavelength: 340/405/450/510/546/578/630nm, 2 More Open 3. Filter Positions, Others On Request. 4. With 20 Incubating Positions. 5. Large Memory To Store 144 Test Programs And 5600 Testing Results. 6. Excellent Q.c Function, Q.c Chart Can Be Stored, Displayed And Printed. 7. 37℃ Temperature In Flow Cell And Incubating. 8. Real Time Graph Can Be Displayed And Printed Dental Chair • 3-way Syringe (one For Straight And One For Angled) • Powerful Suction Device • Saliva Ejector (central Vacuum System For Options) • Dentist Stool • Dental Light • Strong And Weak Two-set Led Sensor Operation Lamp • Automatic Thermostatic Water Supply System • Integral Ceramic Spittoon Water Purification System With A Bottle Of External • Warm Water System • Pure Water System Supply • Pure Water One-touch Switch System • Rotatable Ceramic Spittoon • Dc 24v Noiseless Motor Driver Chair • With Dental Surgical Tools • The Patient Seating Body Is Formed With A Highly Flexible Design Enabling Various Seating Angles. • All Controlled By Computer • Spirit Lock Tight Equilibrium Equip • Foot Pedal • Dental Stool • Multi-adjustable Headrest Gives Patient A Pleasant Position During Treatment • 4-hole/2-hole Handpiece Tubing With Standard Fittings 3 Sets Dental Oral Surgery Set • Extraction Forceps #16 • Extraction Forceps #17 • Extraction Forceps #18l • Extraction Forceps #18r • Extraction Forceps #44 • Extraction Forceps #69 • Extraction Forceps #150 • Extraction Forceps #151 • Aspirating Syringe • Minnesota Retractor • Bone File • Bone Curret • Gum Separator • Seldin Retractor • Root Tip Pick Str • Root Tip Pick L • Root Tip Pick R • Blade Handle #3 • Elevator #301 • Elevator #304 • Surgical Mallet • Iris Scissor Str • Tissue Forcep • Molt • Hemostat Curved • Hemostat Str • Chisel • Periosteal Elevator • Bone Ronguer • Allis Tissue • Needle Holder • Elevator L #302 • Elevator R #303 • Crossbar L • Crossbar R Auto Clave Can Be Heated By Electricity Only. Disinfecting Pressure: 0.14-0.165mpa Volume: 18l Electric Supply: 220v Power: 2kw Box Dimension: 41x41x50cm Hematology Analyzer · 10.4 Inch Touch Screen · 2 Counting Modes · Automatic Re-counting · Lyse Inside The Analyzer, High Space Utilization · 3 Calibration Methods: Manual, Calibrator, Blood · 9 Language Clinical Centrifuge Model: Dsc-200t Dsc-156t Speed: 300~3000rpm At 60hz ; 300~2500rpm At 50hz Timer: 0~30 Min. Mechanical Timer Motor: Brushless Induction Motor Rotor Ar-1506 R.c.f. 1,066g Capacity: 6 X (10~15)ml Standard Accessory: 6 X (10~15)ml Tube Adapter Optional Accessory: (5~7)ml Or (1.5~2.0)ml Tube Adapter Weight (kg): N.w. 3.5 / G.w. 4.5 Overall Dimension: W280xd2805xh255mm Power Supply: Ac 110v 50/60hz (220v 50/60hz Available) 1. Microscope Obtain Clear Images At Three (40x, 100x And 400x) Or Four (40x, 100x, 400x And 600x Or 1000x) Magnifications With 18mm Field Number. All In A Compact And Easy To Carry Size. The Entire Series Is Equipped With 1w X-led1 Illumination For Bright And Uniform Light. If A Cordless Microscope Is Needed, The R Models Are Is Your Choice As They Come With A Rechargeable Battery. Stable, Yet Compact And Light Weight Long-lasting, 8-15h Operating Time Can Be Transported For Being Used On Site Micro Hematocrit Centrifuge 1. Speed12,000rpm (fixed)r.c.f.14,648g 2. Timer0~15 Min. Mechanical Timer 3. Motor Universal Motor 4. Capacity 24 X Capillary Tube (diam. 1.5x75mm) 5. Standard Accessory 6. Percentage Reader (aluminum) 7. Optional Accessory 8. Disc Reader (plastic) 9. Weight (kg)n.w. 9.0 / G.w. 9.5 10. Overall Dimensionw300xd300xh240mm 11. Power Supply Ac 110v 60hz (220v 50/60hz Available) Medical Refrigerator Type: Medical Cryostat Shape: Vertical Over Temperature Alarm : With Alarm Function Scale : Small Non Customized Product Name: Laboratory Refrigerator External Size (mm) : 495x548x683 Capacity : 50 L Temperature Range : 20c-8c Temperature Accuracy: 0.1 Control System : Microprocessor Control Alarm: Audible And Visual Alarm For High And Low Temperature Refrigerator Type: Forced Air Refrigeration System Refrigerant : R600a Climate Type: N,sn Glassdoor: Toughened With Electric Heating Function, No Code Constructure: Unibody Design & High Pressure And High Density Cy Internal Material: Cold-rolled Steel Coated Examination Light • Flexible Holder Light Head ‘ • Led White Light ‘ • Adjustable Dimmer Knob • 220 Volts, 60hz • Wall Or Ceiling Mounted • Power Switch On Headlights • Flexible And Durable Conduit Bp Apparatus • Desk Or Wall-type Bp Apparatus With Large Dial Blood Pressure Monitor Precision Tested • Square Shapes, 14cm Diameter Dial • Adjustable Vertical Angulation For Easy Reading • Specially Designated Base For Desk Or Wall Mounting • Durable Closed System Provides Excellent Accuracy • 300mm Aneroid Meter • Velcro Cuff • Durable Air Chamber, Pump And Control Nebulizer • Power : 220v 60 Hz • Current : 0.8a • Medication Capacity: 6 Ml • Sound Level: <60dba • Average Nebulization Rate : Min. 0.2 Ml/min • Compressor Pressure Range: 8 To 16 Psi • Liter Flow Range : 6-10 Lpm • Operating Temperature Range: 10 C To 40 C • Operating Humidity Range: 10 To 95 % Rh • Storage Temperature Range: - 20 C To 70 C • Storage Humidity Range : 10 To 95% Rh • Dimension (lxwxh): 6.1’’x 5.5’’x 3.5’’ • Weight : 1.2 Kg (2.7lbs) Manual Resuscutator- Adult And Pedia • Material – Silicone, Pc, Pvc. Pe • Size- Adult, Pediatric (child), Infant • Bag Volume -1600ml & 2000ml • Stoke Volume – Infant – 150ml. Pediatric- 400ml & Adult – 800ml • Volume – Infant -280ml, Pediatric – 600ml & Adult – 1650 Ml • Weight -infant – 350g, Pediatric – 410g & Adult 600g Pulse Oximeter • Dual Color Led Display ‘ • Low Perfusion: 0.2% • Anti-shaking • Alarm Value Adjusted In Friendly Menu • 6 Display Mode • Big Font Display Oxygen Tank W/ Regulator 20lbs With Regulator And Dehumidifier. Supplied With Stainless Steel Belt Type Harness. It Must Have A Bracket Stand Or Holder. Examination Table Hamelton Type • Powder Coated Steel Frame • 3 Panel Paddle Foam Mattress • Pullout Foot Stool • Easy To Clean, Stain Resistant Upholstery • Four Front Storage Drawers • Large Drawer • Elevating Backrest • One Pair Of Stirrup • Adjustable Leg Rest Specifications: • Backrest Angle : 0-80 Degrees • Legrest Angle: 270-360 Degrees • Max Capacity :300lbs • Total Mattress Length: 178 Cm • Foot Stool Sized : 29x18x2 Cm • Product Size : 141 X51x87 Cm Iv. Inclusions 1 Window Type Air-con - 1 Horsepower, 220v, Inverter Type 3 Split Type Air-con - 1 Horsepower, 220v, Non-inverter Led Smart Tv - 32 Inches, Internet Capable, Screen Mirroring Features With Internet Modem. Clearance Lights - Led Lights, 24vdc Illuminated Blue, Installed At The Body Perimeter In A Required Interval. Lightnings - Led 220volts Surface Mounted Water Tank - Stainless Steel 304, Rectangular Fabricated, With Breather And Float Switch, With Service Access For Cleaning And Disinfecting. Wastewater Tank - Made Of Stainless-steel Sheet. Bended And Fabricated, With Discharge Valve, Service Access For Cleaning. Wind Breaker - Fiberglass, Molded Cured Resin, Painted With Acrylic Paint, And Top Coated. Balancer - Drop Leg Manual Adjustment Pulldown Stairs - Pull Out The Flat Form And Pull-down Stairs And Retractable Stainless-steel Tube Railings Motorized Canopy - Electric, Remote Controlled, 220v : Both Manual And Electic Doors - Tubular Frame With Aluminum Composite Panel Windows - Extruded Aluminum Frame With Tempered Glass Electricals - Electrical Diagram, Safety Switches, Breakers And Controls, Led Lights, Convenience Outlets, Branches, And Double-throw Switches, External Lines, Genset Lines, Vehicle Engine Accessory Lines, Loads, And Ampacity Schedule. Paintings - Rustproof Undercoating, Acrylic Body Paint, Cabinet, And Table Tops Hasped Finish. Sticker And Labeling - Room Labels, Area Labels, Caution, And Safety Signs. Agency Logo, City Or Municipality Logos, Upholstered Chair And Cabinet - Wooden Frames, Under Cabinets With Upholstered Foam Cushion. 10 Kva Generator Set - 220vac, Diesel-fed, Silent Type, Pull-out Housing Emergency Light - Twin Head, Rechargeable, Lead Acid Battery, 220v-60hz Stabilizers - Dropped Leg, Manual Height Adjustment, Full Fabricated Fire Extinguishers - 10lbs. Abc Type, Dry Chemical Manual Transfer Switch Electrical Wirings, Lighting, And Finishing 1. Layout For Ac 220 Volts, Lighting, And Power Outlets 1.2 Main Power Box For Breaker Distribution 1.3 Connecting Power Cable. 1.4 Power Inverter Ac220 4 Kilowatts. 2. Ceiling Lights- Choosing The Right Light Fitting For Medical Rooms. 3. Wailing And Partition – ¼ Mm Thick Aluminum Composite With Galvanized Frame 4. Finishing: 4.1 All Ceilings And Walls Are Finished In Aluminum Composite. 4.2 Flooring Finished With Vinyl Or (aluminum Checkered Plate – Separate Payment) 4.3 Working Table Top, Cabinets, And Shelves Are Made Of Stainless Steel.

Details: Description 1. The Department Of Education – Division Of Tangub City, Through The General Appropriations Act 2024 Intends To Apply The Sum Of Three Million Nine Hundred Seventy-eight Thousand One Hundred Six Pesos (php 3,978,106.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Second Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools With Identification Number Tvl - 2025 – Rx – Tangub City – 030.a. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Item Description Abc Lot 1. Lorenzo Tan National High School (caregiving Nc Ii)- Php 400,403.00 5 Piece Airpot 1.type: Water Heater 2. Outer Material: Hard Plastic, (pp) Polypropylene, Heat Resistant 3.cavity Material: Stainless Steel 4. Capacity: 2.5 Liters 5.voltage: 220/240/volts 6.ac 50/60 Hz. Power In Watts: 500 To 800 Watts 7.comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 8. The Item Must Be Branded And Good Quality. 10 Piece Apron 1.type: Bib Apron 2. Material: Polyester-cotton Fabric 3.length: 20 To 40 Inches (minimum) 4. With 2 To 3 Bottom Pockets; 5.color: Any 6.the Item Must Be Of Good Quality 2 Piece Bath Tub, Baby 1. Material: Hard/sturdy Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: (l X W X H) 670 To 700 Mm X 400 To 420 Mm X 160 To 190 Mm (minimum) 4. Thickness: 3 Mm To 6 Mm (minimum) 5.color: The Item Must Be Of Good Quality 10 Piece Baby Blanket 1. Type: Blanket 2. Material: 100% Cotton 3.color: White 4. Dimension: (l Xw) 38 To 42 Inches X 28 To 32 Inches (minimum) 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Basin (small) 1.material: Hard Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: 280 - 320 Mm Diameter X 80 - 120 Mm Higher (mimimum) 4. Thickness: 2 Mm To 4 Mm (minimum) 5. The Item Must Be Of Good Quality 20 Piece Bath-towel, Towellete 1. Type: Bath Towel 2. Material: 100% Cotton 3.color: White 4. Dimension: ( L X W ) 120 - 125 Cm X 60 - 65 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality 5 Piece Bedpan 1.material: Hard Plastic, (ps) Polystyrene 2. Color: Any Color 3.dimension: ( L X W X H) 22 - 26 Cm X 27 - 32 Cm X 7 - 12 Cm (minimum) Approximate 4. Capacity: 1 Liter (minimum) 5.thickness: 2 To 5 Mm 6.saddle-shaped And Lightweight 7. The Item Must Be Of Good Quality 10 Piece Blanket 1. Type: Blanket 2. Material: Cotton 3.color: White 4. Dimension: (l X W) 80 - 90 Inches X 54 -64 Inches Approximate 5. Washable 6. The Item Must Be Of Good Quality 3 Piece Bottle Sterilizer, Electric 1. Type: Electric Steam Sterilizer 2. Material: Hard Plastic (p E) Polyethylene Or Its Equavalent 3.color: Any Color 4. Capacity: 6 Bottles (minimum) 5.sterilizes Bottle And Accessories By Steam 6. With Automatic Power Shut-off Function 7. Dimensions: 8. Power Supply: 220 V-240v Ac, 50/60 Hz. 9. The Item Must Be Of Good Quality 5 Piece Bread Toaster 1. Type: Electric Bread Toaster 2. Dimensions ( W X D X H): 25 - 30 Cm X 15 -20 Cm X 18 - 22 Cm (minimum) Approximate 3. Capacity: 2 Slices 4. Power Supply: 220v-240v Ac, 50/60 Hz. 5. 400 To 600 W (minimum) 6. The Item Must Be Of Good Quality 10 Piece Burping Cloth 1. Type: Burping Cloth 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: Length: 17 -19 Cm Width: 14 -16 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality 10 Piece Cane 1.type: Adjustable Offset-walking Cane 2. Material: Aluminum 3.tip Size: 18 4. Height Adjustment: 31 Inches To 39 Inches (with 1 Inch. Increment) 5.weight Capacity: 200 - 250 Lbs. (minimum) 6.with Rubber Handle; With Push-botton Height Adjustment 7. The Item Must Be Of Good Quality 5 Piece Carpet 4ft. X 8 Ft 1.material: Polyster 2. Color: Any Patterned Color 3.dimension:48 Inches X 96 Inches (minimum) 4.the Item Must Be Of Good Quality 5 Set China Ware 1.material: Porcelain 2. Fit To Be Used In Ovens And Microwaves 3.specific Dimensions: Dinner Plate Diameter: 10 Inches (minimum) 4. Salad Plate Diameter: 7 Inches (minimum) 5.bowl Diameter: 5 Inches (minimum) 6.mug: 12 Oz. (minimum) 7. The Item Must Be Of Good Quality 8. Set Includes: 1 Piece Dinner Plate, 1 Set Salad Plate, 1 Piece Bowl, 1 Piece Mug 10 Piece Clothes Brush 1. Type: Rectangular Clothes Brush 2. Handle Material: Wood 3. Bristle Material: Plastic Bristle 4. Color: Any Color 5.overall Dimension: ( L X W X H) 140 -160 Mm X 45- 60 Mm X 20 -30 Mm (minimum) 6. The Item Must Be Of Good Quality 10 Piece Clothes Hamper 1. Type: Square Hamper 2. Material: Polyester 3. Color: Any Color 5. Dimension: ( L X W X H) 32 To 34 Cm X 36 To 38 Cm X 56 To 58 Cm (minimum) 5. The Item Must Be Of Good Quality 2 Piece Clothes Rack 1.type: Single-pole Clothes Rack 2. Material: Stainless Steel 3. Dimension: ( L X W X H) 30 To 32 Inches X 14 To 38 Inches X 62 To 64 Inches (minimum) 4. Comes With 4 Caster Wheels 5. The Item Must Be Of Good Quality 3 Piece Comforter 1.type:comforter 2. Material: Polyester 3.color: Any Color 4. Dimension: ( L X W) 84 To 88 Inches X 62 To 65 Inches (minimum) 5.thickness: 20-30 Mm (minimum) 6.washable 7. The Item Must Be Of Good Quality 3 Piece Commode 1.type: Foldable Commode 2. Durable Plastic Snap- On Seat And Lid Withouot Pushing Buttons 3. Blue Powder-coated Steel-welded Construction 4. Plastic Arms For Added Comfort 5.comes Complete With 12 Qt. Commode Bucket With Carry Handle, Cover And Splash Shield 6. Specifications: Width 18 Inches Between Arms/ 22.5 Inches Outside Approximate 7. Set Dimensions: W 32 -36 Cm X D 35 -40 Cm, Height 38 -54 Cm Approximate 8. Weight 13 Lbs., Weitgh Limit 350 Lbs. 9. The Item Must Be Of Good Quality 5 Set Cooking Utensils 1. Material: Stainless Steel 2. The Set Is Comprised Of Ff:; 1 Pc. -16 X 9.5 Cm Sauce Pan With Glass Lid (minimum) 3. 1 Pc. - 16 X 95 Cm Casserole With One Glass Lid, (minimum) 4. 1 Pc. - 18 X 10.5 Cm Casserole With Glass Lid, (minimum) 5.1 Pc. - 20 X 11. 5 Cm Casserole With Glass Lid, (minimum) 6. The Item Must Be Of Good Quality 2 Piece Crutches, Adjustable 1.type: Adjustable Crutches 2. Set Includes: 3 Pcs./set 3.material: Aluminum Powder-coated 4. Color: Any Color 5.weight Capacity: 300 Lbs. (minimum) 6. Dimensions: Youth Size 7. User Heights: 4 Ft. 6 Inches To 5 Ft. 2 Inches 8. Underarm Height: 37 Inches To 46 Inches 9. Adult Size: User Heights: 5 Ft. 2 Inches To Ft. 10 Inches 10. Underam Heights: 45 Inches To 53 Inches 11. Tall Adult Size: User Heights: 5 To 10 Inches 12. Underam Height: 53 Inches To 61 Inches 13. The Item Must Be Of Good Quality 10 Piece Cutlery 1.material: Stainless Steel 2. 20 Pieces Set For 4 3. 4 Dinner Knives 4. 4 Dinner Forks 5. 4 Dinner Spoons 6. 4 Salad Forks 7. 4 Tea Spoons 8. The Item Must Be Of Good Quality 10 Piece Cutting Board, Plastic 1. Material: Polyethylene Plastic 2. Color: Any Color 3. Dimension: ( L X W X H) 240 - 260 Mm X 140 - 160 Mm X 10 - 15 Mm (minimum) 4. Reversible Cutting Surface 5. The Item Must Be Of Good Quality 10 Piece Digital Thermometer, 32 C-42.9 C (90.0f-109.9f 1. Case Material: Hard Plastic (pe) Polyethylene 2. Color: Any Color 3. Range: 32 C - 42.9 C (90.0f-109.9f) 4. Accuracy: + 0.1c 35.5c-42.0c(+ 0.2 F 95.9f-107.6f) 5. Battery Operated 6.memory: Last Measuring Reading 7.alarm: Approx. 10 Seconds Sound Signal When Peak Temperature Reached. 8. The Item Must Be Of Good Quality 2 Piece Dressing Trolley 1.material: Shelves: Powder-coated Steel Sheet 2. Dimensions: ( W X D X H) 48 - 50 Cm X 48 - 50 Cm X 83 - 85 Cm (minimum) 3.number Of Shelves: 2 4. With Four Revolving Castors, Two Lockable 5. The Item Must Be Of Good Quality 10 Piece Electric Knife 1. Type: Electric Knife 2. Material: Stainless Steel And Hard Plastic, (pe) Polyethylene 3. Power Supply: 220/240 Volts, Ac 50/60 Hz. 4. Dimensions: 4.25 X 2.75 X 11.88 Inches (minimum) 5.comes With Touch Button Control, Safety Lock And English User & 39;s Manual 6. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 7. The Item Must Be Of Good Quality 10 Piece Face Towel/towellete 1. Type: Face Towel 2. Material: 100% Cotton 3. Color: White 4. Dimension: ( L X W ) 28- 32 Cm X 28 -32 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Feeding Bottle Brush 1. Bristle Material: Nylon 2. Color: Any Color 3. Handle Material: Hard Plastic, (ps) Polystyrene 4. Total Length: 280 -320 Mm (minimum) 5. Fit With The Standard Feeding Bottle For The Baby 6.comes With Nipple Brush 7. Washable 8. The Item Must Be Of Good Quality 5 Set Feeding Utensils (child) 1.material: Hard Plastic, (ps) Polystyrene 2. Sets Includes: 6 Pcs./set 3. 1 Pc Knife 4. 1 Pc- Plate 5. 1 Pc. -bowl 6. 1 Pc. - Cup 7. 1 Pc. -fork 8.1 Pc. - Spoon 9. Color: Any 10. The Item Must Be Of Good Quality 7 Set First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1 Pc; Sterize Gauge Swab (4x 4 X 12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band-aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5 Cm X 5 Cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90 Cm X 90 Cm X 120 Cm, 2 Pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2 Pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2 Pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5 Cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms, 2 Pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2-3 Years Expiration, 1 Tube; Medical Tweezers Min. 8 Cm, Plastic, 2 Pcs; Plastic Bags, Resealable, Minimum Of 24 Pcs, 100mm X 180mm, 24 Pcs, 150mm X 230mm; Cotton Balls, 50 Balls In A Sealed Package, 2 Packs; Hot And Cold Pack, Reusable, 1 Pack; Water Resistant And Sturdy Case W/ Handle That Can Accomodate All The Listed Items. 20 Piece Flat Sheet 1.type:bed Sheet 2. Material: 100% Cotton 3. Color: White 4. Dimension: Width - 137 - 145 Cm Length - 180 -200 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: 4 Gallons ( Minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With Packing Case Color: Any Color Smooth And No Rough Surfaces 20 Box Gloves, Rubber (15 Mils) Medium Size (#8) Super Nitrile, Flocklined Interior (acid/solvent Resistant) Individually Packed For Hand Protection 10 Box Gloves, Surgical (disposable) 1.material: Latex 2. Color: White 3. Thickness: .09 Mm (minimum) 4. Disposable And Sterile 5. The Item Must Be Of Good Quality 20 Piece Gown (hospital) 1.type:unisex Hospital Gown 2. Material: Polyester- Cotton 3. Color: Any Color 4. Size: One Size Fits All 5. Comes With Overlap Back Closure 6. The Item Must Be Of Good Quality 5 Set Grooming Kit (hairbrush Comb, Nail Cutter, Nail Brush) 1. Set Includes: 6 Pcs./ Set (minimum) 2. Materials: Stainless Steel And Hard Plastic 3. 2 Nail Clippers/ Trimmers Of Different Sizes 4.1 Multipurpose Scissors 5. 1 Ear Pick 6. 1 Tweezer 7. 1 Comb 8. The Item Must Be Of Good Quality 10 Piece Hand Towel 1. Type: Hand Towel 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: ( L X W) 65 -75 Cm X 32 -42 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 3 Piece High Chair/booster Seat/ Portable Seat 1. Material: Foldable Powder Coated Steel Frame Or Its Equavalent 2. Phone Type: Corded 3. Polyester Harness, Seat/back Cushion 4. Overall Dimensions: ( L X W) 65 -75 Cm X 50 -60 Cm X 90 - 102 Cm (minimum) 5. Capacity: 40 Lbs. (minimum) 6. With 3-position Seat Recline 7. The Item Must Be Of Good Quality 10 Piece Hot Water Bag 1. Material: Rubber Or Its Equavalent 2. Color: Any Color 3. Overall Dimension: (lxw) 200- 300 Mm X 150 -200 Mm (minimum) 4. Leak-proof And Washable 5. The Item Must Be Of Good Quality 10 Piece Kettle 1. Material: Heat-resistant Hard Plastic 2. Capacity: 1- 1.5 Liters (minimum) 3. Height: 25-35 Cm (minimum) Approx 4. Voltage: 220/240 Volts, Ac 50/60 Hz 5. Power In Watts: 1000 To 1500 Watts 6.comes With Automatic Shut-off Feature And Permanent Water Level Indicator 7. Pitcher-type With Pouring. 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 9. The Item Must Be Of Good Quality 10 Set Measuring Cups .. 1/4, 13, 1/2 1 Cup Set 1. Materials: Stainless Steel 2. Set Includes: 4 Pcs./set; 3. 1 Pc. - 1/4 Cup (60 Ml) 4. 1 Pc- -1/3 Cup (80ml) 5. 1 Pc.- 1/2 Cup (125 Ml) 6. 1 Pc. - 1 Cup ( 250 Ml) 7. Thickness: .5 Mm To 1 Mm (minimum) 8. The Item Must Be Of Good Quality 10 Piece Medical Tray 1. Type: Tray 2. Material: Stainless Steel 3. Overall Dimension: (lxw X D) 300- 350 Mm X 200 -250 Mm X 12 - 19 Mm (minimum) 4. Thickness: .7 To 1 Mm (minimum) 5. The Item Must Be Of Good Quality 2 Set Mixing Bowl, Stainless, 6-piece Set 1. Material: Stainless Steel 2. Quantity Of Set: 6 Pcs./set 3. Dimension: 3/4 Qt., 1.5 Qt., 3 Qt., 4 Qt., 5 Qt., 8 Qt., 4. The Item Must Be Of Good Quality 10 Piece Pail, Plastic, 10 Liters 1. Material: Polyethylene Plastic 2. Dimension: 25-30 Cm Diameter X 23-27 Cm Depth (minimum) 3. Color: Any Color 4. Chromed Finished Handle 5. Capacity: 10 Liters (minimum) 6. Material Must Be Non-toxic 7. The Item Must Be Of Good Quality 10 Piece Pans 1. Type: Frying Pan 2. Material: Stainless Steel 3. Handle: With Hard Plastic Heat Insulation 4. Tempered Glass Lid With Steam Hole 5. Size 23 -26 Cm With Lid 6. The Item Must Be Of Good Quality 10 Piece Peeler 1. Type: Peeler 2. Blade Material: Stainless Steel 3. Handle Material: Stainless Steel 4. Overall Dimensions: 18 X 8 Cm (minimum) 5. Comes With Self-locking 6. The Item Must Be Of Good Quality 10 Piece Pick Up Forcep 1. Type: Curved Forceps 2. Material: Stainless Steel 3. Overall Length: 100-130 Mm (minimum) 4. Comes With Self-locking 5. The Item Must Be Of Good Quality 10 Piece Pillow 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Pillow Case 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Portable Mixer 1. Type: Portable Mixer 2. Material: Stainless Steel, Clear Acrylic 3. Capacity: 16-18 Oz. (minimum) 4. Size: 170 - 220 Mm X 75- 100 Mm 5. Requires 2 Aaa Batteries 6. Power In Watts: 250 To 300 Watts 7. The Item Must Be Of Good Quality 10 Piece Potato Masher 1. Type: Portable Masher 2. Material: Stainless Steel And Hard Plastic 3. Mesh Head Diameter: 70-90 Mm (minimum) 4. Overall Length: 250 - 270 Mm (minimum) 5. Handle Length: 120-140 Mm (minimum) 6. Washable 7. The Item Must Be Of Good Quality 5 Set Pots 1. Type: Cooking Pot 2. Material: Stainless Steel 3. Set Includes: 4 Pcs./set 4. 1 X Pot With Lid 5. 1 X Pan With Lid 6. 1 X Strainer 7. 1 X Egg Streamer 8. Size: (l X W X H) 40 To 42 Cm X 12 To 14 Cm X 26 To 28 Cm 9. The Item Must Be Of Good Quality 5 Piece Skillet 1. The Item Shall Have The Following Specifications. Material Including Handle: Cast Iron 2. Color: Any Color 3. Dimension ( Dia. X Depth): 250 - 320 Mm X 50 - 70 Mm (minimum) 4. Handle Casted With The Body And Having Plastic Or Rubber Heat Insulator 5. Body Thickness: 1.5 - 3 Mm (minimum) 6. Washable 7. The Item Must Be Branded And Have Good Quality. 5 Piece Sphygmomanometer 1. Type: Aneroid 2. Material: Nylon Cuff And Inflation Bag, Die - Cast Zinc Manometer 3. Package Inlcluded: 1 X Aneroid Sphygmomanometer. 4. Size: ( L X W X H Cm) = 18 To 20 Cm X 11 To 13 Cm X 11 13 Cm 5. Nylon Zippered Carrying Case 6. Capacity: 0 To 300 Mm Hg 7. The Item Must Have Good Quality. 5 Piece Stethoscope 1. Type: Dual Head Stethoscope 2. Material: Stainless Steel Chestpiece And Eartubes 3. Reinforced Pvc Tubing 4. Soft Pvc Eartips 5. Color: Any Color 6. Bell Diameter: 18-25 Mm Approx. 7. Diaphragm Diameter: 25-50 Mm Approx. 8. Overall Length: 66-75 Cm (minimum) 9. The Item Must Be Of Good Quality 5 Piece Urinal 1. Type: Unisex Portable Urinal 2. Material: Hard Plastic, (pp) Polypropylene 3. Color: Any Color 4. Total Capacity: 28 Oz. Minimum 5. Dimension: ( L X W X H) 270 To 290 Mm X 145 To 160 Mm X 70 To 80 Mm ( Minimum) 6. Thickness: 1 Mm To 3 Mm (minimum) 7. The Item Must Have Good Quality. 5 Piece Vacuum Cleaner 1. Material: Plastic (pp) Polypropylene Or Its Equavalent 2. Color: Any Color 3. Suction Power: 18 To 22 Kpa (minimum) 4. Tank Capacity: 24 Liters (minimum) 5. Vacuum Hose Length: 6 To 8 Ft. (minimum) 6. Power Supply: 220 V - 240 Ac , 50/60 Hz. 7. With Accesories: Extension Wand, Utility Nozzle, Standard Paper Filter 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 9. The Item Must Be Branded And Good Quality 3 Piece Wheel Chair 1. Type: Foldable Wheel Chair 2. Overall Dimensions: ( L X W X H) 40 - 44 Inches X 26 - 30 Inches X 34 - 38 Inches ( Minimum) 3. Folded Dimensions: ( L X W X H ) 40 To 44 Inches X 10 To 14 Inches X 34 To 38 Inches (minimum) 4. Capacity: 350 Lbs. (minimum) 5. With Padded Arm Rests; With Push-to-lock Wheel Brakes 6. The Item Must Be Of Good Quality Lot 2. Sta. Maria National High School (hairdressing Nc Ii)- Php 323,170.00 5 Pcs. Bowl, Mixing, Plastic With 10.5 Cm X 6cm 2 Pcs. Bowl, Shampoo, Stainless Steel Frame, Bowl Dimensions: 19 Inch X 20 Inch X 10 Inch With Hose Attachment Of 7 Ft. 5 Box Box, Hairpin, Metal With 3.5 X 4.5 X 0.5 Inches(100 Pcs Per Box) 5 Pcs. Brush, Applicator, Plastic With 70mm X 80mm 5 Pcs. Brush, Hair, Plastic Bristle And Wooden Handle, Width - 2 Inches 10 Pcs. Cap, Frosting, With Hook, Silicone With 31cm X 22cm,rounded Metal Hook 10 Pcs. Cap, Heating, Waterproof, Cordless With 21-24 Inches 10 Pcs. Cape, Polyester With 125 Cm X 140 Cm 5 Pcs. Chair,high, Metal Painted With Anti Rust With 15 Inches X 33 Inches, Synthetic Leather Seat 5 Pcs. Chair, Hydraulic, Metal Base With 59 Cm X 54 Cm X 51-78cm, 180kg, 360' Rotation 10 Pcs. Clamp, Plastic, Length:9.5cm, Thickness:10mm 10 Pcs. Clamp, Duck Bill, Metal, Length: 11 Cm, Elasticity Stainless Steel Spring 5 Pcs. Clipper, Hair, Body Material: Hard Plastic, Blade Material: Carbon Steel, 6 Watts 10 Pcs. Comb, Afro, Plastic, Length: 7 Inches, Width: 3.25 Inches, Number Of Teeth: 12 Teeth, Teeth Height: 2.5 Inches 10 Pcs. Comb, All Purpose, Plastic, 18 Cm Long , Has Both Fine And Medium Teeth Position On One Side Only, Height Of The Teeth: 2 Cm 10 Pcs. Comb, Haircutting, Hard Plastic, Length Including The Handle:180mm, Width: 30mm With Detachable Steel Blades And Blade Holder 10 Pcs. Comb, Large Toothed, Plastic, Size:15 Cm, Number Of Teeth: 10 Teeth, Gap Between Comb's Teeth: 0.4 To 0.5 Cm , Teeth Size: 0.3 Cm X 4cm 10 Pcs. Comb, Tail, Plastic, Size : 8 Inches X 1 Inches, Tail Length: 4 Inches Tooth Length: 3/4 Inch 10 Pcs. Comb, Teasing, Plastic,1st Row: Large Teeth 25 Mm Long, 2nd Row: Small Teeth 19 Mm, Over-all Size: 20cm X 3.8 Cm 5 Pcs. Comb, Wide Tooth, Plastic, Size:15 Cm, Number Of Teeth:10 Teeth, Gap Between Comb's Teeth:0.4 To 0.5 Cm, Teeth Size: 0.3cm X 4cm 8 Pcs. Crimpers, 25 Watts, Size:38 Cm X 15.5 Cm X 9 Cm, Maximum Temp.: 200 Degrees Centigrade, Rated Voltage:10 -230volts Ac 5 Pcs. Curling Iron, Ceramic, 65watts, 210-240volts Ac, Barrel Size: 1 Inch, Adjustable Heat Setting Of 200 Degrees Centigrade, Swivel Cord Up To 360 Degree 5 Pcs. Drip Pan, Hard Plastic, Size:17.5 X 25.8 X 1 Inches, Thickness: 1/8 Inch, Shallow Rectangular Type 5 Pcs. Dryer, Hair, 1000w, Rated Voltage: 220vac, 18.5cm X 16cm X 6.5cm With Plastic Handle Design 10 Box Gloves, Disposable, Size: 25cm X 23cm, 100 Pcs Per Box 5 Pouch Gloves, Rubber, Medium, Thickness: 4 Mil, Acid Resistant 5 Pouch Gown, Smock, Polyester, Sizes: Small (50inches X 56inches);medium (52inches X 58inches); Large (54 Inches X 60inches) 10 Pouch Hairclips, Metal, Size:67mm X 19mm 10 Pack Hairnet, Invisible, Nylon, Size: 55mm, Stretchable, Color: Black 10 Pc Headband, 6 Inches, Woven Crochet Tube 10 Pc Headband, Flannel, Cloth, Size : 45 Cm, Width: 8 Cm 6 Pc Infrared Iron, Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body, Power: 70 Watts, Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm, Heating Plate 50 Mm, Heating Time: Within 30 Seconds;variable Heat Settings: From 250 To 450 Degrees Fahrenheit 10 Pc Mirror, Hand, Plastic, Size 15 Cm Diameter, Frame Thickness: 6.5mm, Over-all Length With The Handle: 20 Cm 3 Pc Mirror, Modular, Plain Mirror, Mirror Material: Glass, Frame Material: Aluminum (cut To Fit), Dimensions: 75 Cm X 65 Cm, Mirror Thickness: 6mm 10 Pc Prong Clip, Double, Steel, Size: 45 Mm 10 Pc Prong Clip, Single,steel, Size: 55 Mm 10 Pc Razor, Straight, High Carbon Steel, Foldable Straight Razor, Replaceable Blade; Dimensions: 14 Cm X 2 Cm When Folded; Double-edged Razor Blades 3 Dz Roller Pins, Metal, Size: 60mm Long, Quantity By Dozen(12 Pieces) 10 Pc Rollers, Jumbo, Plastic 44mm In Diameter X 64mm 10 Pc Rollers, Large Sized, Plastic, Size: 40mm Diameter X 60mm Long 10 Pc Rollers, Medium Sized, Plastic; Diameter: 38 Mm ,length: 58mm 4 Pc Scissor, Cutting, Stainless Steel,length: 17cm,blade Width 10 Cm 4 Pc Scissor, Thinning, High Carbon Steel, Blade Length 6cm, Style: Right Handed Scissor, Length: 17cm 5 Pc Scoop, Plastic, Capacity:1/2 Cup, Rounded Edges With Handle Thickness: 1.5 Mm 5 Pc Shower Cap, Plastic, Size: One Size Fits All Or 30cm 5 Pc Spatula, Plastic, Dimension: 7.5 Cm X 1.5 Cm 5 Pc Spray Gun, Transparent Plastic, Capacity: 300ml, Dimension: Bottom Is 7 Cm And The Height Is 17cm 3 Pc Steamer, Hair, 450 Watts, 220 Volts/50-60hz, Hood Material: Polycarbonate, Hood 30 Cm Diameter Opening X 25 Cm, Timer Setting Is Up To 60 Minutes, 32 Ounce Water Reservoir, Adjustable Height 100- 150cm 30 Pcs. Stool, Metal, Electroplated, Load Capacity: 150kg, Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely Lot 3. Sta. Maria National High School (wellness Massage Nc Ii)-php 198,338.00 5 Pcs. Dummy, Anatomical, Plastic, 32" Tall, 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks, Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach, Base Is 13" X 9" (removable), Weighs 12 Lbs. 5 Pcs. Massage Bed/table, Hard Wood With Steel Bracings, Hardwood Frame, Marine, Plywood Deck; Color: Black, Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in., Leg Thickness - 35mm, Cushion System: High Density Foam (7.5 Cm / 2.95") With Pu Leather Cover (1mm Thick), Weight Capacity: 250 Kg(minimum), Gross Weight: 21 Kg 2 Pcs. Massage Chair, Padded With 3" Thick, High-density, Small-cell Foam, Size: 14"-diameter Seat But Without Back And Arm Rest, With Metal Post And Hard Plastic Star, Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever, Five Heavy-duty, Smooth-rolling Wheels, Load Capacity: 265 Lbs / 120 Kg (maximum), Smooth Surface And No Sharp Edges 6 Pcs. Sphygmomanometer, 33 To 42 Cm Arm Diameters, Accuracy: ±3mm Hg;measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings, Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure 6 Pcs. Stethoscope, Stainless Steel Double Chest Piece, Color: Black, Tubing Description: Y-tube Pvc, Uses Extra Soft Replaceable And Pivotable Ear Tips, The Binaural Is Chromium-plated, Chest-piece Diameter: 44 Mm And Non-chill Rim, Overall Length: 29" /74 Cm 6 Pcs. Talking Sphygmomanometer, Nylon Cuff Sizes: 33 To 42 Cm Arm Dia, Dimensions: 98mm*126mm*60mm, Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg, Weight: 450g , Range: 20~280mmhg(0.4kpa-37.3kpa), Pressure Accuracy: ±3mmhg(±0.4kpa), Pulse Measurement Range: 40 ~199 Beats /min, Voltage: 4*aaa Alkaline Batteries 25 Pcs. Talking Thermometer, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f), Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches / 51 (w) X 110 (h) X 30 (d) Mms 26 Pcs. Thermometer, Digital, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery , Power Consumption: 0.1mw, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) 10 Pcs. White Board, White Formica Laminated, Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm Wih Plastic Corner Caps, The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube , Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels, Height From Floor: 210 To 214cm Lot 4. Sumirap National High School And Tangub City National High School (bpp Nc Ii)-php 519,702.00 10 Set Air Compressor With Airbrush Cake Decorating Set(airbrush Gravity Feed Dual Action Airbrush Compressor Kit 0.2/0.3/0.5mm Needle Air Brush For Cake Decorating Painting. Material: Aluminum + Copper Type: Single Cylinder Piston Compressor Power: 1/5 Hp Plug Type: Eu Voltage: 220-240v/50hz Speed: 1450 Rpm Air Volume Per Minute/liter: 23l/min Maximum Pressure: 7bar (100psi) Working Pressure Of Spray Gun: 15-50psi Low Noise: ≤50db Accessories: Pressure Gauge, Pressure Gauge, Air Filter Automatic Stop, Starts At 2.8 Bar, Stops At 4 Bar (special Pressures Available) Connection: With Connection G 1/8" Bsp Cable: Approx. 1.8m / 6ft) 40 Pc Egg Beater(stainless Steel Semi-automatic Mixer/manual Whisk Egg Beater Kitchen Cooking Tool) 40 Set Board, Chopping ,6 Color( Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Comes With No Sharp Edges And With Hole For Storage Purposes) 10 Pc Double Boiler (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) 80 Set Bowl, Mixing Set Stainless (premium Stainless Steel Mixing Bowls Bowl Sizes Are: 5 Qt, 4 Qt, 3qt, 1.5qt, And ¾ Qt And They Each Fit Perfectly Within One Another) 70 Set Cake Pan, Round, Size: 4''x3'' (non-stick Aluminum Alloy Cake Round Pan) 30 Set Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set ) 60 Pc Cake Turn Table (type: Turn Table Body Shape : Circular Material: Cast Aluminum Plate.and Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise ) 30 Pc Coupler (type: Foood Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe ) 50 Set Cup, Measuring (stainless Steel Measuring Cup Set For Dry Ingredients. Composed Of 1 Cup, 3/4 Cup, 1/2 Cup, 1/4 Cup, 1/8 Cup) 50 Set Cup, Measuring 250 Ml. For Liquid Glass (250 Ml Heat Resisting Measuring Glass) 40 Set Cup, Measuring 500 Ml. For Liquid Glass (500ml Heat Resisting Measuring Glass) 40 Pc Cutter, Dough (type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Lenght : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) 40 Pc Cutter, Pie (stainless Steel Rolling Knife/pizza Cutter) 30 Pc Flour Sifter,hand Cranked (type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm ( Minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe) 40 Pc Grater (type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe) 50 Pc Knife, Kitchen (premium Quality Stainless Steel Kitchen Knife, 6-8” In Length) 20 Pc Knife, Pallete (premium Quality Stainless Steel Pallete Knife Ideal For Butter.) 50 Pc Ladle, 3oz (premium Quality Stainless Steel Soup Ladle, 3oz) 40 Pc Loaf Pan, Big (carbon Steel Non-stick Loaf Pan, Size: L=32,w=13,h=7cm Minimum) 40 Pc Loaf Pan, Medium (carbon Steel Non-stick Loaf Pan, Size: L=28, W=15.5, H=7cm Minimum) 40 Pc Loaf Pan, Small (carbon Steel Non-stick Loaf Pan, Size: L=25.5, W=13.5, H=6cm Minimum) 40 Pc Muffin Pan, Big (carbon Steel Non-stick Muffin Pan, 12 Holes,3oz) 40 Pc Muffin Pan, Medium (carbon Steel Non-stick Muffin Pan, 9 Holes,3oz) 40 Pc Muffin Pan, Small (carbon Steel Non-stick Cupcake Pan, 6 Holes) 70 Pc Pie Pan, 10'' (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 10” In Diameter) 70 Pc Pie Pan, # 8 (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 8” In Diameter) 50 Set Pillars, Cake (premium Quality Acrylic Cake Support Pillar, 12cm In Diameter(minimum),straw Size Diameter ) 60 Pack Piping Bag (reusable Silicone Piping Bag, Biggest Size, 100pcs Per Pack) 40 Pc Rectangular Pan (carbon Steel Non-stick Rectangular Cake Pan. Size: L=10.8", W=7", H=1.5", Minimum) 70 Pc Rolling Pin, Plastic (non-stick Rolling Pin Made With Food Grade Nylon, Size:13") 100 Pc Rubber Scraper, Silicone (size: 21cm X 4.1cm, Material: Silicone) 40 Pc Sauce Pan Non Stick (non-stick Sauce Pan With Lid, Size: 20cm) 40 Pc Sheet Pan / Cookie Sheet (aluminum Baking Sheet, Size: 13x18”) 50 Set Spoon, Measuring (premium Quality Stainless Steel Measuring Spoon Set, Compost Of 1/8tsp, 1/4tsp, 1/2tsp, 1tsp, 1/4tbsp, 1/2tbsp, 1tbsp)) 70 Pc Spoon,wooden (premium Quality And Durable Long Handled Wooden Spoon/ladle. Length: 30.5cm Minimum) 40 Pc Strainer (stainless Steel, Fine Mesh Strainer, Size: 18cm) 40 Set Tip, Decorating, Large (type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping,stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box Smooth And Deformities Free Must Be Branded) 30 Pc Weighing Scale, 10 Kg. (kitchen Weighing Scale, 10kg Maximum) 40 Pc Weighing Scale, 5 Kg. Digital(digital Kitchen Weighing Scale, Digital Price Computing Weight Electronic Scale, Capacity Is At Least 5kilograms, Pan Size 34.5 X 23.5cm) 70 Pc Wire Whisk, Medium (stainless Steel Wire Whisk, Size: 14”) Lot 5. Sumirap National High School And Tangub City National High School ( Cookery Nc Ii )-php 1,405,964.00 30 Pcs. Apple Corer, Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe. 4 Pcs. Bain Marie, Table, (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Soiuce: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 20 Pcs. Blender, Electric Heavy Duty, Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 40 Pc Board, Chopping/ Cutting, Plastic, Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe. 20 Pcs. Boiler, Double, Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 30 Pcs. Braising Pan, Medium, Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 30 Pcs. Can Opener, Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs. 30 Pcs. Casserole,medium Pot, Body Shape:round Material:stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case . 30 Pcs. Casserole,small Pot, Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm. 20 Pcs. Colander, Medium, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm Body Thickness: 0.8 Mm (minimum) 20 Pcs. Colander, Small, Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 20 Set Cup,measuring( For Solid) Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 20 Pcs. Dispenser,paper Towel Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 12 Pcs. Fan, Electric, Ceiling Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 6 Pcs. Fire Extinguisher With Contents .for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 20 Pcs. Fish Poacher,medium, Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Includes Stainless Steel Lid With Handle And Removable Insert 20 Pcs. Fork, Carving Body Shape: Square Shape Prong Prong Material:high Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastictriple-riveted Handle Preferably With Packing Case 400 Pcs. Fork, Kitchen Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 36 Dozen Frying Pan, Large, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) 40 Pcs. Frying Pan, Medium, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 30 Pcs. Frying Pan Small, Non Stick , Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 Pcs. Funnel, S/s, Medium, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 22 Pcs. Funnel, S/s, Small, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Garbage Bin, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Glass Rack, Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 20 Pc Ice Cream Scoop, Stainless Steel Ice Cream Scoop 45mm. Simply Squeeze Handle. 30 Pc Knife,boning, Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 30 Pc Knife,chef, Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 30 Pc Knife,cleaver, Cutting Edge: Straight, Pointed End Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets Blade Thickness: 3 Mm (minimum) 30 Pc Knife,oyster, Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 4 Pc Light,emergency, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 4 Pc Meat Slicer, Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 30 Set Pastry Tube, Stainless Steel Pastry Tube 24, Big 40 Pc Peeler, Y -type, Rack Dimension: Length: 38 Cm X Width 23 Cm (minimum) Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger Preferably With A Packing Case 14 Set Pepper And Salt Mill Food Grade And Non-toxic Material. Mill Cookery Nc Ii Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism 20 Pack Piping Bag, Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 10 Pc Plate Rack Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 12 Set Preparation Table With Sink, Heavy Duty Wire Shelving, 2.6 Mm Diameter (minimum) Table With Sink Cookery Nc Ii Type: Preparation Table With Sink & Sheleves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 4 Pc Pressure Cooker, Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 24 Pc Roasting Pan , Body Shape:rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 40 Pc Scissor, Kitchen Type:kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 30 Pc Siever,small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 30 Pc Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 30 Pcs. Skimmer,spider, Dishwashing Safe Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe. 24 Pcs. Soup Cup, Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 20 Pc Soup Ladle, 12oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle, 3 Oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 Pc Soup Ladle 6 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle 8 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 62 Pc Spatula, Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 400 Pc Spoon, Kitchen Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 60 Pc Spoon, Kitchen (slotted) Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) 30 Set Spoon, Measuring Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 40 Pcs. Spoon, Parisienne Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 40 Pc Spoon, Serving Preferably With A Packing Case Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 30 Pc Spoon,wooden Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 20 Pc Stock Pot,large . Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) 30 Pc Strainer, Chinois,small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer,chinois,medium Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 26 Pc Strainer,medium,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer, Small,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) 30 Pc Tenderizer, Medium Aluminum Meat Tenderizer 16 Pc Thermometer,pocket/pin Pocket/pin Food Thermometer 20 Pc Tong,12'' Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 20 Pc Tong 8'' Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pc Tray,baking,small, Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) 36 Pc Tray,utility,medium,plastic White Plastic, White Multi Purpose 13”x10”utility Tray 30 Pc Turner,3'x6'', Slotted Turner, 3" X 6" Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 4 Pc Utility Cart, Stainless Steel 3 Tier Trolley Cart 75x40x85. 20 Pc Weighing Scale 1 Kg. Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 20 Set Weighing Scale 5kg. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 40 Set Wire Skimmer Small, Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 40 Pc Wire Whisk Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk, Medium, Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk,small, Type: Wire Whisk, Small Body Shape: Baloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 18 Pc Wok,medium Type: Wok, Medium Body Shape:round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 18 Pc Wok,small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 12 Pc Working Table, Stainless, 4 Seaters Stainless Working Table , Two Layer (120x60x80) 30 Pc Zester, Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Lot 6. Sumirap National High School (housekeeping Nc Ii)-php 326,452.00 1 Pc Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting) 25 Pc Apron, Polyester-cotton (bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads) 5 Pc Baskets, Laundry (3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 1 Set Bed, Queen (bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 1 Set Bed, Single (bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 10 Pc Board, Ironing (type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges) 25 Pair Boots, Safety, Plastic (upper Material: Elastic Pvc Sizes: 7 Inches - 5pcs 8 Inches - 5pcs 9 Inches - 5pcs 10 Inches -5pcs 11 Inches - 5pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size) 15 Pc Brushes, For Housekeeping (brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges) 10 Pc Buckets, Water (water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges) 10 Pc Caddy, Toilet (carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges) 1 Unit Carpet Sweeper (carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting.) 1 Unit Cart, For Housekeeping Nc Ii (housekeeping Cart Trolley, Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels. Cart Frame: Steel, Powder Coated. Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings. Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges) 50 Pc Cleaning Cloth, Linth-free (lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch) 1 Unit Coffee Maker (coffee Maker, Electric Material: Metal, Plastic, Glass. Capacity: 6 Cups (minimum). Detachable Tank, With Water Level Indicator. Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher. With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option). Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines) 5 Pc Dust Pan (dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges) 5 Pc Duster, Anti-static (anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges) 7 Unit Fan, Electric ( Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service) 3 Pc Fire Extinguisher(with Contents) (1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality) 10 Pc Flashlight (flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 10 Pc Flat Iron (clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines.) 10 Pc Foam, Scrubbing (1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality) 4 Pc Garbage Receptacles (1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality) 30 Pair Gloves, Rubber (1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality) 15 Pc Goggles, Safety (safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges) 1 Pc Hairdryer( Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Roll Hose, Water(water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges) 3 Pc Kettle, Electric(electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 5 Pc Laundry Sorter(3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 2 Pc Light, Emergency(emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 2 Pc Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges) 20 Pc Mop (mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 1 Set Polisher, Floor, Electric, With Accessories(electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 5 Pc Shelving(shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges) 5 Pc Sign, Caution(caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges) 10 Pc Sponges, Dish(dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded) 10 Pc Spray Gun, Water(barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded) 10 Pc Squeegee(squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges ) 5 Pc Squeezer, Mop(mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges) 1 Pc Step Ladder(material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Brandedfeet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum)) 2 Pc Vacuum Cleaner, Dry And Wet(electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 1 Unit Washer, Laundry(1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 2 Pc White Board(white Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges) Lot 7. Tangub City National High School (food And Beverage Services Nc Ii) Php 571,245.00 50 Pcs Chair, Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 4 Pcs Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 6 Pcs Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color : White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 24 Set Cups Ans Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 10 Pcs Folder, Menu Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 50 Pcs Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 50 Pcs Fork, Dessert Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished,with Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mmwidth : 20 - 30 Mmhandle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 60 Pcs Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Fish Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mmhandle Thickness : 2 Mm - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 24 Pcs Glass, Champagne Flute Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Collins Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Juice/hi-ball 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Diswasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 36 Pcs Glass ,pilsner(ice Tea Glass) Type:falired Rim,body Shape:round Slender Bowl,material:clear Glass Capacity:20 0z To 23 Oz With Flaired Rimand Slender Shape Packed In Carton Box.the Item Must Have Good Quality. 36 Pcs Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 40 Pcs Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 4 Pcs Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 4 Pcs Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 24 Pcs Knife, Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 24 Pcs Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mmhandle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 24 Pcs Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 20 Pcs Napkin Holder (stainless) Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 12 Pc Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 50 Pc Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Plate, Dessert, 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 60 Pc Plate, Dinner, 10" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Plate, Fish, 8" To 9" Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 10 Pcs Round Table (8's) Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 50 Pcs Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 50 Pcs Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 50 Pcs Salad Plates 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 20 Pcs Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 25 Pcs Sauce Laddles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 50 Pcs Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 25 Pcs Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 25 Set Show/service/base Plates 11" To 14" Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 50 Pcs Side Plates Or Bread Plates 6'' Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 25 Pcs Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 25 Pc Soup Laddle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 15 Pc Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dinner Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Soup (cream And Cosume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver Packed In Plastic Pouch 50 Pc Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 25 Pc Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 Pc Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 100 Pc Table Napkins, Cloth, 16"x16" Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 80 Pcs Table Skirting Cloth 90" To 90" Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Table, Square/rectangular (4's Or 6's) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 20 Pcs Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 50 Pcs Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 15 Pcs Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pcs Tooth Pick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 30 Pcs Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 20 Pcs Tray, Round (bar) Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 30 Pcs Water Pitcher (stainless) Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 8. Tangub City National High School (front Office Services And Local Guiding Services) Php 232,832.00 50 Pcs Calculator Type: Simple Calculator, Non Scientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment, 1 Pcs Cart, Bell Boy Type:hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 1 Pcs Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels, 1 Pcs Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body:plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures 30 Pc Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 1 Pcs Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, 3 Pcs Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 1 Pc Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant; 1 Pc Key Card Maker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 1 Pcs Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type:wall Mounted Rack Pack With Shipping Carton Box 1 Pc Safety Deposit Box Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures On How To Use The Equipment, Branded 20 Pcs Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Powerconsumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma 25 Sets First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1pc; Sterize Gauge Swab(4 X4 X12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band -aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5cm X 5cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90cm X 90cmx 120cm, 2pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms , 2pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2- 3years Expiration, 1 Tube; Medical Tweezers Min. 8cm, Plastic, 2pcs; Plastic Bags, Resealable, Minimum Of 24pcs, 100mm X 180mm, 24pcs, 150mm X 230mm Cotton Balls , 50 Balls In A Sealed Package, 2 Packs Hot And Cold Pack, Reuseable, 1 Pack Water Resistant And Sturdy Case W/ Handle That Can Accommodate All The Listed Items. 4 Pcs Megaphone Battery Operated (4 Pcs - Size D Battery) With Built-in Siren Power Output: 20-watts (minimum) Range: 700 Meters (minimum) With Hand Grip And Carrying Strap Branded With Users Manual That Contains The Specification, List Of Parts, Instruction Guide, Troubleshooting, Safety Instruction. 100 Pcs Whistle Anodized Aluminum;size : Length - 6.5cm X 3cm Diameter; Handy And Lightweight; Loud Whistle Can Be Heard For Far Distance Of 100 Meters; With Key Ring For Attachment 2 Pcs White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform.board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Capscomes With Metal Tray For Marker And Eraserthe Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobblewith 4 Lockable Hard Plastic Caster Wheelsoverall Height From Floor: 210 To 214cmsmooth Surface, No Sharp Edges Total Abc 3,978,106.00 2. The Department Of Education – Division Of Tangub City Now Invites Bids For The Above Procurement Project. Second Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Department Of Education – Division Of Tangub City And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. , Mondays To Fridays Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot 1 - Five Hundred Pesos (p500.00) Lot 2 - Five Hundred Pesos (p500.00) Lot 3 - Five Hundred Pesos (p500.00) Lot 4 – One Thousand Pesos (p1,000.00) Lot 5 - Five Thousand Pesos (p5,000.00) Lot 6 - Five Hundred Pesos (p500.00) Lot 7 – One Thousand Pesos (p1,000.00) Lot 8 - Five Hundred Pesos (p500.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Education – Division Of Tangub City Will Hold A Pre-bid Conference On January 20, 2025, 9:00 Am At Division Office Conference Hall Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00 A.m. On February 4, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall February 4, 2025, 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Bidders Or Its Authorized Representatives Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. 11. The Department Of Education – Division Of Tangub City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Gina L. Mandawe Head, Bac Secretariat Deped, Division Of Tangub City, Anecito Siete St., Mantic, Tangub City 7214 (088) 530-5988 Depedtangub.bacsec@deped.gov.ph Https://tangub.deped.gov.ph/ 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://tangub.deped.gov.ph/ Erlinda G. Dael, Phd., Cese Assistant Schools Division Superintendent Bac Chair

Details: 8 page 8 Of 57 page 8 Of 57 summary: department Of Veterans Affairs, Veterans Health Administration, Network Contracting office 5, Is Issuing This Request For Sources Sought Notice In Order To Identify Vendors that Are Interested In And Capable Of Providing Contractor Services. For A Contractor That can Provide A Licensed Md Professional Engineer (p.e.) And Sti Sp001 Inspector(s). For Tank And Icp Regulatory; Training; And Tank Closure Support. To Comply With The Joint Commission Emergency Power Systems Requirements In Ec.02.0.07 And The Joint Commission Emergency Management Requirement, Em.02.01.01, The Vamhcs Currently Has 43 Aboveground Fuel Sources For Emergency Power Systems (aboveground Storage Tanks, Asts). There Is Also Other Oil-filled Equipment Such As Wet Transformers And Elevator Hydraulic Reservoirs. For The Baltimore Va Medical Center, Loch Raven Va Medical Center, And The Perry Point Va Medical Center. for Response Details See Interested & Capable Responses Last Two Pages. scope Of Work: locations: baltimore Va Medical Center Perry Point Va Medical Center 10 North Greene Street 361 Boiler House Rd. baltimore, Md 21201 Perry Point, Md 21902 loch Raven Va Medical Center 3900 Loch Raven Blvd baltimore, Md 21218 tank And Icp Regulatory; Training; And Tank Closure Support For Baltimore Vamc; Loch Raven Vamc And Perry Point Vamc Integrated Contingency Plans (icps) 512-25-2-637-0059 i. Introduction to Comply With The Joint Commission Emergency Power Systems Requirements In Ec.02.0.07 And The Joint Commission Emergency Management Requirement, Em.02.01.01, The Vamhcs Currently Has 43 Aboveground Fuel Sources For Emergency Power Systems (aboveground Storage Tanks, Asts) Please See Attachment A For A List Of Vamhcs Asts And Usts. This List Will Change As Tanks Are Added And Removed. . There Is Also Other Oil-filled Equipment Such As Wet Transformers And Elevator Hydraulic Reservoirs. Asts And Usts Fall Under Several Environmental Regulatory Requirements: Section 112.7(e) Of The Clean Water Act And Maryland Department Of The Environment Oil Operations Permit, Code Of Maryland Regulations (comar) 26.10.01-.18 And All Associated Standards And References Within The Regulations Such As Nfpa 30; Pei Rp 1700; Sti Sp001; Etc; As Well As The Latest Comar Regulations That Pertain To Asts. This Base Plus Four-year Best Value Contract Will Provide Ast Subject Matter Expert Support To Accomplish The Following For The Baltimore; Loch Raven; And Perry Point Vamcs: clin 1.0 Update Integrated Contingency Plans (icps) clin 2.0 Modify/update And Present Icp Training To Vamhcs Personnel clin 3.0 Update Vamhcs Ast/ust Policies; Fuel System Sops And Other Tank-related Documentation Based On Latest Mde Ast/ust Regulations And All Associated Standards And References Within The Regulations Such As Those From Nfpa; Pei; Sti Sp001; Etc. clin 4.0 Ast Closure Support For Vamhcs Tanks Based On Latest Mde Ast/ust Regulations And All Associated Standards And References Within The Regulations Such As Nfpa 30; Pei Rp 1700; Sti Sp001, Etc. As Well As With The Resource Conservation And Recovery Act (rcra) all Updates, Support, And Training Shall Be Conducted In Accordance With The Following Regulations: 40 Cfr 112 (clean Water Act Spcc Requirements) 40 Cfr 262.34 And 40 Cfr 265.52 (rcra Contingency Plan) code Of Maryland Regulations (comar) 26.13.05.04 (maryland Contingency Plan Requirements) comar 26.10.01-.18 (mde Oil Pollution Control And Storage Tank Management) And All Associated Standards And References Within The Regulations Such As Those From Nfpa; Pei; Sti; Etc. comar 26.10.17.13 (closure Of Shop-fabricated Aboveground Storage Tank (ast) Systems comar 26.10.18.12 (closure Of Field-erected Ast Systems) national Fire Protection Association Sections Nfpa 30, Flammable And Combustible Liquids Code; petroleum Equipment Institute (pei) Rp 1700; all Applicable State And Local Regulations, Executive Orders, Va Directives, And Facility Policies. ii. Description Of Work 1.0 Clin 1.0 Icp Updates the Contractor Shall Update The Baltimore; Loch Raven; And Perry Point Vamc Icps As Identified Below And As Needed Each Year Due To Technical Changes From Construction Contracts. visn facility rcra Lqg required Plan Update date Of Last Update 5 baltimore Vamc yes icp 2020 5 perry Point Vamc yes icp 2021 5 loch Raven Vamc yes icp 2020 at A Minimum The Creation, Updates And Revisions For Icps Shall: describe The Actions Facility Personnel Must Take To Response To Fires, Explosions, Or Any Unplanned Sudden Or Non-sudden Release Of Hazardous Waste Or Hazardous Waste Constituents To Air, Soil, Or Surface Water At The Facility. describe Arrangements Agreed To By Local Police Departments, Fire Departments, Hospitals, Contractors, And State And Local Emergency Response Teams To Coordinate Emergency Services. list Names, Addresses, And Phone Numbers (office And Home) Of All Persons Qualified To Act As Emergency Coordinator, And This List Must Be Kept Up To Date. Where More Than One Person Is Listed, One Must Be Named As Primary Emergency Coordinator, And Others Must Be Listed In The Order In Which They Will Assume Responsibility As Alternates. include A List Of All Emergency Equipment At The Facility (such As Fire Extinguishing Systems, Spill Control Equipment, Communications And Alarm Systems (internal And External), And Decontamination Equipment), Where This Equipment Is Required. This List Must Be Kept Up To Date. In Addition, The Plan Must Include The Location And A Physical Description Of Each Item On The List, And A Brief Outline Of Its Capabilities. include An Evacuation Plan For Facility Personnel Where There Is A Possibility That Evacuation Could Be Necessary. This Plan Must Describe Signal(s) To Be Used To Begin Evacuation, Evacuation Routes, And Alternate Evacuation Routes (in Cases Where The Primary Routes Could Be Blocked By Releases Of Hazardous Waste Or Fires). describe The Physical Layout Of The Facility And Include A Facility Diagram, Which Must Mark The Location And Contents Of Each Fixed Oil Storage Container And The Storage Area Where Mobile Or Portable Containers Are Located. Including: type Of Oil In Each Fixed Container And Its Storage Capacity For All Containers Over 55 Gallons. For Mobile Or Portable Containers, Either Provide The Type Of Oil And Storage Capacity For Each Container Or Provide An Estimate Of The Potential Number Of Mobile Or Portable Containers, The Types Of Oil, And Anticipated Storage Capacities; discharge Prevention Measures Including Procedures For Routine Handling Of Products (loading, Unloading, And Facility Transfers, Etc.); discharge Or Drainage Controls Such As Secondary Containment Around Containers And Other Structures, Equipment, And Procedures For The Control Of A Discharge; countermeasures For Discharge Discovery, Response, And Cleanup (both The Facility's Capability And Those That Might Be Required Of A Contractor); methods Of Disposal Of Recovered Materials In Accordance With Applicable Legal Requirements; And contact List And Phone Numbers For The Facility Response Coordinator, National Response Center, Cleanup Contractors With Whom You Have An Agreement For Response, And All Appropriate Federal, State, And Local Agencies Who Must Be Contacted In Case Of A Discharge. provide Information And Procedures To Enable A Person Reporting A Discharge To Relate Information On The Exact Address Or Location And Phone Number Of The Facility; The Date And Time Of The Discharge, The Type Of Material Discharged; Estimates Of The Total Quantity Discharged; The Source Of The Discharge; A Description Of All Affected Media; The Cause Of The Discharge; Any Damages Or Injuries Caused By The Discharge; Actions Being Used To Stop, Remove, And Mitigate The Effects Of The Discharge; Whether An Evacuation May Be Needed; And, The Names Of Individuals And/or Organizations Who Have Also Been Contacted. include A Prediction Of The Direction, Rate Of Flow, And Total Quantity Of Oil Which Could Be Discharged From The Facility As A Result Of Each Type Of Major Equipment Failure Using Autocad Or Approved Software. recommend, If Needed, Appropriate Containment And/or Diversionary Structures Or Equipment To Prevent A Discharge. be Certified By A Professional Engineer Licensed In The State Of Maryland identify Written Procedures For Inspection, Tests, And Record Keeping Requirements. include Requirements For Personnel, Training, And Discharge Prevention Procedures Related To: operation And Maintenance Of Equipment To Prevent Discharges; Discharge Procedure Protocols; Applicable Pollution Control Laws, Rules, And Regulations; General Facility Operations; And, The Contents Of The Facility Icp. key Personnel Who Are Accountable For Discharge Prevention. describe How The Facility Will Secure And Control Access To The Oil Handling, Processing And Storage Areas; Secure Master Flow And Drain Valves; Prevent Unauthorized Access To Starter Controls On Oil Pumps; Secure Out-of-service And Loading/unloading Connections Of Oil Pipelines; And Address The Appropriateness Of Security Lighting To Both Prevent Acts Of Vandalism And Assist In The Discovery Of Oil Discharges. describe Procedures For Filling And Dispensing Oil At The Facility And Recommend Methods For Preventing Releases. include A Complete Discussion Of Conformance With The Applicable Requirements And Other Effective Discharge Prevention And Containment Procedures Required By Federal, State And Local Guidelines. include A Quick Reference Guide (qrg). 1.1 Clin 1.0 Milestones, Time Lines And Project Submittals clin 1.0 Milestone clin 1.0 Time Line site Visits And Investigations For All Sites completed Within 60 Days Of Notice To Proceed (ntp) And Within 60 Days Of Each Option Year Start Date draft Submission Of Icps For All Sites 90 Days After Ntp And Within 90 Days Of Each Option Year Start Date cor Review Period 3 Weeks After Receiving Drafts final Submission 2 Weeks After Receiving Cor Comments clin 1.0 Project Submittals: 1. Draft Icp: One Electronic Copy Should Be Sent To The Cor. The Cor Will Then Review And Provide Comments To Both The Contractor And The Site Staff. Estimate Two Rounds Of Comment Resolution For Each Draft. 2. Final Icp: Six Hardcopies (with Electronic Deliverable) Will Be Delivered To The Cor And Vamhcs Point Of Contact For Each Vamhcs Facility (perry Point, Baltimore, And Loch Raven Vamcs). 3. Icp Documents: The Contractor Shall Provide Electronic Access To All Icp Documents. 2.0 Clin 2.0 Training to Comply With The Requirements Under The Clean Water Act And The Resource Conservation And Recovery Act, The Vamhcs Facilities Of Baltimore, Perry Point, And Loch Raven Will Also Require Initial Training On All New And Updated Icps. after The First Icp Update, He Contractor Must Provide Two-hour, Facility-specific, Initial Training To Each Individually Identified Vamhcs Facility For Up To 50 Employees Per Site (maximum Of 200 Total, Total 8 Hours And Can Be Done Virtually, In-person Or A Combination Of Both). Contractor Shall Provide Updates To Icp Training Each Year Following The Base Year. The Training Should Provide Detailed Requirements Related To The Entire Icp; Not Just Specific To The Most Recent Revisions. This Training Will Include Monthly Inspections; Spill Response And Instruction On Completion Of Documentation And Recordkeeping Requirements Of The Plan. The Training Shall Include The Submission Of An Electronic Copy Of The Training For Future Facility Training Use. 2.1 Clin 2.0 Milestones, Time Lines And Project Submittals clin 2.0 Milestone clin 2.0 Time Line draft Submission Of Icp Training For Each Of The Three Sites 90 Days After Ntp And Within 90 Days Of Each Option Year Start Date cor Review Period 2 Weeks After Receiving Draft Training Slide Deck final Submission 2 Weeks After Receiving Cor Comments provide Annual Training (can Be Virtual Via Platform Such As Ms Teams) within 30 Days After Final Submission clin 2.0 Project Submittals: 1. Draft Icp Training: One Electronic Copy Should Be Sent To The Cor For Each Vamhcs Facility. The Cor Will Then Review And Provide Comments To Both The Contractor And The Site Staff. Estimate Two Rounds Of Comment Resolution For Each Draft. 2. Final Icp Training: Electronic File Will Be Delivered To The Cor And Point Of Contact For Each Vamhcs Facility (perry Point, Baltimore, And Loch Raven Vamcs) 3. Icp Training: The Contractor Shall Provide Icp Training Either In-person Or Via Ms Teams (or Other Compatible Virtual Platform) For Real-time Training To Each Vamhcs Facility (perry Point, Baltimore, And Loch Raven Vamcs). 4. All Training Documents: The Contractor Shall Provide Electronic Access To All Training Documents. clin 3.0 Vamhcs Ast/ust Document Reviews And Updates review All Vamhcs Ast/ust Policies; Fuel System Sops And Other Related Documentation Such As Technical Information Library Tank-related Specifications And Update All Documentation Based On Latest Mde Ast/ust Regulations And All Associated Standards And References Within The Regulations Such As Those From Nfpa; Pei; Sti Sp001; Etc. 3.1 Clin 3.0 Milestones, Time Lines And Project Submittals clin 3.0 Milestone clin 3.0 Time Line review Of All Vamhcs Ast And Ust-related Documentation (including Related Policies; Sops; Icps; Inspection Checklists; Reports Etc.) Assume Review Of 4-6 Documents Each Year Of The Contract With Most Extensive Review The First Year Of The Contract. concurrently With Icp Updates And Within 90 Days Of Each Option Year Start Date track Change Updates To All Documents Reviewed With Suggestions For Improvement, Efficiencies, Etc. Please Note, The Latest Vamhcs Document Templates Must Be Utilized. Please Refer To Vamhcs Cor For Latest Document Templates. within 180 Days Of Base Year Start Date And Within 180 Days Of Each Option Year Start Date cor Review Period 2 Weeks After Receiving Draft Changes final Submission - Two Versions Delivered Electronically To Cor: 1)version With All Track Changes In The Document 2)version With All Track Changes Accepted. 2 Weeks After Receiving Final Cor Comments clin 3.0 Project Submittals: 1. Track Change Updates: One Electronic Copy Should Be Sent To The Cor For Each Vamhcs Document Reviewed. The Cor Will Then Review And Provide Comments To The Contractor. Estimate Two Rounds Of Comment Resolution For Each Document Reviewed. 2. Final Documentation Updates (track Change And Clean Versions): Electronic Files Of Final Track Changes Version And Final Clean Versions Will Be Delivered To The Cor For Each Document Reviewed. clin 4.0 Tank Closure Support: the Contractor Shall Also Complete And/or Oversee And Review Tank Closure Activities At The Vamhcs Sites As Needed, To Include Any Tank Closures As Required By The Following To Ensure All Regulatory Items Are Completed. This Will Include Documentation; Sampling; And Testing As Well As Removal And Disposal Of Tank And Tank Contents. For Estimating Purposes, Assume The Following (however, May Be Subject To Change): six Ast Closures In The Base Year Of Contract: 1 X 75-300 Gal Diesel Tank (shop-fabricated) 3x 500-700 Gal Diesel Tanks (shop-fabricated) 2 X 15,000 Gal Diesel Tanks (shop-fabricated) three Ast Closures In Year One Of Contract: 1 X 75-300 Gal Diesel Tank (shop-fabricated) 1 X 500-700 Gal Diesel Tank (shop-fabricated) 1 X 150,000 Gal #2 Fuel Oil Tank (field-erected) two Ast Closures In Year Tow Of Contract: 1x 1000-4000gal Diesel Tank (shop-fabricated) With Underground Piping And Two Subsurface Sumps 1 X 75-300 Gal Diesel Tank (shop-fabricated) mde Does Not Prescribe A Set Number Of Samples Per Tank Type Or Size. Assume Number Of Samples Based On Worst Case Scenarios. For Example 5-10 Soil Samples/ast For Sizes 55 Gallons To 700 Gallons; 6-10 Soil Samples/ast For Each Of The 15,000-gallon Tanks; And 12 Shallow Soil Samples For The 150,000-gallon Ast. Sample Analyses Include Vocs, Mtbe, Tba, Naphthalene, Tph-gro, And Tph-dro. Please Note, This Could Be Increased Depending Upon Mde Requirements. closures Per Comar 26.10 (or Most Recent Version Of Mde Regulations) And comar 26.10.17.13 (closure Of Shop-fabricated Aboveground Storage Tank (ast) Systems comar 26.10.18.12 (closure Of Field-erected Ast Systems) petroleum Equipment Institute (pei) Rp 1700 sti Sp001 resource Conservation And Recovery Act (rcra) all Closure Documentation; Sampling And Testing; Removal And Disposal Of Tank And Tank Contents In Accordance With All Epa; Mde; And Local Laws; Submittal To Mde And Any Related Onsite Support Will Be Required By The Contractor ast Closure For Vamhcs Tanks Shall Be Based On Latest Mde Ast/ust Regulations And All Associated Standards And References Within The Regulations Such As Nfpa 30; Pei Rp 1700; Sti Sp001, Etc. This Will Include Permanent And Temporary Closure Per The Following Or Latest Comar Regulations And Mde Fact Sheet (this One Or Latest Version): Https://mde.maryland.gov/programs/land/oilcontrol/documents/ast_closure_fact_sheet_6.9.23_6pgs.pdf: (1). At Least 30 Days Before Beginning The Permanent Closure Of The Ast System: (a) Notify Mde Oil Ast & Permits Section, Oil Control Program Land And Materials Administration In Writing Of The Planned Ast System Permanent Closure; And (b) Submit To The Department For Approval A Proposed Sampling Plan For A Site Assessment To Determine If There Is Evidence Of A Spill, Release, Or Discharge Where Contamination Is Most Likely To Be Present, Which Includes The Sampling Of, At A Minimum, The Following Areas Of The Ast Site: (i) Within And Immediately Outside Of The Secondary Containment Dike, If Present; (ii) Within The Footprint Of The Removed Ast; And (iii) Beneath Underground Piping Associated With The Removed Ast (if Applicable); (2). Place The Ast System Out-of-service In Accordance With §b Of This Regulation: b. Out-of-service. An Owner, An Operator, And A Person In Charge Of An Ast System With A Shop-fabricated Ast Shall Complete Each Of The Following Steps To Place The Ast System Out-of-service: (1) Remove All Oil From The Ast System; (2) Isolate All Piping Connected To The Ast; (3) Remove All Waste Materials From The Ast System, Including Storage Tank- Bottom Sludge, And Dispose Of These Materials In Compliance With Applicable Federal, State, And Local Laws; (4) Purge All Petroleum Vapors And Maintain The Ast System Vapor Free; (5) Secure The Ast System To Prevent Unauthorized Entrance Or Tampering; (6) Protect The Ast System From Flotation; (7) Continue The Operation And Maintenance Of Corrosion Protection On The Ast System In Accordance With Regulation .10 Of This Chapter; (8) Lock The Fill Port; (9) Label The Ast Using Lettering At Least 3 Inches High, In A Readily Visible Location On The Ast, With The Following Information: (a) Date The Ast Was Placed Out-of-service; (b) Name Of Product Last Stored; And (c) The Words "out-of-service" Or "empty"; And (10) Notify The Department In Writing 30 Days Before Placing The Ast System Out-of-service. (3) Comply With Pei Rp 1700 "recommended Practices For The Closure Of Underground Storage Tank And Shop-fabricated Aboveground Storage Tank Systems"; (4) Disconnect And Remove All Aboveground Piping Associated With The Ast System; (5) Disconnect And Remove All Underground Piping Associated With The Ast System: (a) Under The Continuous On-site Presence And Direction Of A Certified Ust System Technician Or Remover; And (b) In Accordance With The Ust System Permanent Closure Procedures Inâ comar 26.10.10.02d; (6) Remove The Ast And Associated Piping From The Site; And (7) Within 45 Days Of Completing The Permanent Closure And Approved Site Assessment, Submit A Closure Report To The Department Detailing: (a) The Ast Closure Activities; And (b) The Results Of The Sampling Event, Including A Map Identifying Sample Locations, Laboratory Results, Summary Of Findings, And Conclusions. 4.1 Clin 4.0 Milestones, Time Lines And Project Submittals clin 4.0 Milestone clin 4.0 Time Line draft Submission Of All Required Items Within Latest Mde Closure Regulations (see Paragraphs Above) Such As Sampling Plans; Drawings; Etc. 10 Days After Notification Of Tank Closure And Within 10 Days Of Each Required Mde Closure Item Listed In The Latest Mde Closure Regulations. cor Review Period 1 Week After Receiving Draft Submission final Submission 1 Week After Receiving Cor Comments submittal To Mde 2-3 Business Days After Final Submission Of The Items Above To Cor provide Tank Closure Reports, Sampling Plans, Testing And All Related Closure Documentation, Photos, Etc. Into A Final Report within 30 Days After Final Submission Of Last Closure Item For Each Tank That Is Closed. provide All Required Onsite Support Required (for Tasks Such As Sampling; Tank And Tank Contents Removal And Disposal Etc.) 2-4 Onsite Visits As Required Per Tank Closure clin 4.0 Project Submittals: 1. Draft Closure Items Required By Latest Mde Regulations: One Electronic Copy Should Be Sent To The Cor For Each Vamhcs Facility. The Cor Will Then Review And Provide Comments To Both The Contractor And The Site Staff. Estimate Two Rounds Of Comment Resolution For Each Draft. 2. Final Closure Items Required By Latest Mde Regulations: Electronic File Will Be Delivered To The Cor And Point Of Contact For Each Vamhcs Facility (perry Point, Baltimore, And Loch Raven Vamcs) 3. Draft Tank Closure Report With All Regulatory Elements Required: One Electronic Copy Should Be Sent To The Cor And Point Of Contact For Each Vamhcs Facility. The Cor Will Then Review And Provide Comments To Both The Contractor And The Site Staff. Estimate Two Rounds Of Comment Resolution For Each Draft. 4. Final Tank Closure Report With All Regulatory Elements Required: One Electronic Copy Should Be Sent To The Cor And Point Of Contact For Each Vamhcs Facility Within Two Weeks Of Receipt Of Cor Comments. 5. Onsite Support Schedule For Reconnaissance; Sampling; And Tank Removal/disposal: Contractor To Provide At Least 30 Days Prior To Each Ast Closure. 5.0 Qualifications: prime Contractor Personnel Must Perform The Work In This Sow And All Work Shall Be Managed By A Currently Licensed Md Professional Engineer (p.e.) And Sti Sp001 Inspector(s). prime Contractor Personnel Who Will Be Performing The Work On This Contract Must Show Recent (within The Past Three Years) Past Performance Successfully Completing Spcc/integrated Contingency Plans And/or Plan Updates And Associated Training. prime Contractor Personnel Who Will Be Performing The Work On This Contract Must Show Recent (within The Past Three Years) Past Performance Working With Maryland Oil Pollution Control Regulations For Asts And Usts And Industry Standards Referenced Within. This May Include But Is Not Limited To: comar 26.10, Chapters 1-18 (or Latest Edition Of Md Oil Pollution Control And Storage Tank Management Regulations) steel Tank Institute (sti) Sp001 petroleum Equipment Institute (pei) Rp 1700. national Fire Protection Association (nfpa) 30 prime Contractor Personnel Who Will Be Performing The Work On This Contract Must Show Recent (within The Past Three Years) Past Performance Successfully Completing Ast Permanent Closures Per Mde Regulations And Industry References Within The Regulations, Particularly: comar 26.10.17.13 (closure Of Shop-fabricated Aboveground Storage Tank (ast) Systems comar 26.10.18.12 (closure Of Field-erected Ast Systems) pei Rp 1700. nfpa 30 sti Sp001 prime Contractor Must Have An Office Within 200 Miles Of The Perry Point Va Medical Center Within The Area Of Maryland, Delaware, Pennsylvania Or Virginia/washington, D.c. vamhcs Personnel Will Provide Timely Access To All Tanks And Tank Areas, Including Unlocking Of Gates And Fill Ports As Needed. contractor Will Be Able To Work Onsite Each Day For 8-hours As Needed. a Total Of 8 Days Onsite Is Assumed For Completing Perry Point Vamc Icp Updates And Review Of Tanks For All Clins In This Sow. a Total Of 1 Day Onsite Is Assumed For Completing Baltimore Vamc Icp Updates And Review Of Tanks For All Clins In This Sow. a Total Of 1 Day Onsite Is Assumed For Completing Loch Raven Vamc Icp Updates And Review Of Tanks For All Clins In This Sow. a Total Of 2-4 Days Onsite Is Assumed For Completing Each Tank Closure At The Loch Raven; Baltimore; And Perry Point Vamcs. contractor Will Supply Appropriate Personnel And Monitoring During The Confined Space Entries, When Needed Per Osha Standards (one Vaulted Tank At Perry Point Vamc Is Located Within A Confined Space). the Contractor Will Supply An 8-foot, A-frame Ladder To Access Tank Tops. For Tanks Taller Than That For Which A Catwalk, Access Platform, Stairs, Or Other Safe Means Of Access Are Not Present, Contractor Will Provide Required Safety Equipment Per Latest Osha Standards. contractor Will Supply An Osha Health And Safety Plan For Review By Cor If Requested. 6.0 Background as Required By The Clean Water Act And In Accordance With The Code Of Federal Regulations 40 Cfr Section 112, Facilities With An Aggregate Aboveground Oil Storage Capacity Greater Than 1,320 Gallons Or An Underground Oil Storage Capacity Greater Than 42,000 Gallons Must Develop, Implement, And Maintain An Integrated Contingency Plan (icp), Which Will Meet The Requirements For A Spill Prevention Control And Countermeasures Plan (spccp) And Resource Conservation And Recovery Act (rcra) Hazardous Waste Contingency Plan. The Icp Is Required For Facilities To Prevent Discharges To Waters Of The United States And Respond To Spills Should They Occur. per 40 Cfr 112.5, An Icp Shall Be Amended By A 3rd Party Professional Engineer (p.e.) When There Is A Change In Facility Design, Construction, Operation, Or Maintenance That Affects Its Potential For Discharge, Or Every Five Years. To Do This, A 3rd Party Professional Engineer Licensed In The State Of Maryland Must Certify The Changes And Update The Associated Icp, Including Drawings And An Update Of The Quick Reference Guide (qrg). The Following Va Facilities Are Subject To This Requirement: Baltimore Va Medical Center (vamc), Perry Point Vamc, And Loch Raven Vamc. additionally, As Required By The Resource Conservation And Recovery Act (rcra) And In Accordance With 40 Cfr 262.34, Generators Of Hazardous Waste Must Develop, Implement, And Maintain A Hazardous Waste Contingency Plan. Specifically, Large Quantity Generators Must Maintain A Current, Written Contingency Plan Which Should Be Updated As Needed. The Following Va Facilities Require Written Hazardous Waste Contingency Plan Updates: Baltimore Vamc, Perry Point Vamc, And Loch Raven Vamc. attachment A - This List May Be Updated As Tanks Are Added/removed And Will Be Provided By The Vamhcs Cor To The Contractor (tanks Highlighted In Yellow Are Planned For Closure And Removal Depending On Funding And Priorities) perry Point Vamc Aboveground Storage Tanks (above 55gal): table A-1. Aboveground Storage Tank Inventory Perry Point Vamc tank No. location capacity (gallons) product hi-level Alarm containment And Spill Control Features d-17h kitchen, Bldg. 17h 3,000 diesel Fuel yes double-walled Tank, Overfill prevention Device dt-17h emergency Generator, Bldg. 17h 100 diesel Fuel yes integral Secondary Containment d-19h medical Ward, Bldg. 19h 2,000 diesel Fuel no double-walled Tank d-20 raw Water Pumping station, Bldg. 20 605 diesel Fuel no double-walled Tank, secondary Containment d-20h/d-333 generator Bldg.333, adjacent To Bldg. 20h 2,000 diesel Fuel yes double-walled Tank, Overfill Prevention Device, Spill Bucket dt-20h/dt- 333 generator Bldg. 333 150 diesel Fuel no double-walled Tank d-23h/d- 361g hospital Clinic, Bldg. 23 (outside building 23h) 2,500 diesel Fuel yes double-walled Tank, Spill Bucket dt-23h/dt- 361g emergency Generator, Bldg.361 G (outside Building 23h 75 diesel Fuel yes double-walled Tank dt 23h/gg106 room Gg 106, bldg. 23h (inside building 23h) 75 diesel Fuel yes double Walled Tank d 103 water Filter plant, Bldg. 103 4000 diesel Fuel no vaulted, Double Walled Tank With Double-walled Underground Piping, secondary Containment dt 103a water Filter plant, Bldg. 103 242 diesel Fuel no double Walled Tank, Secondary Containment dt 103b water Filter plant, Bldg. 103 242 diesel Fuel no double Walled Tank, Secondary Containment 10 page 10 Of 57 page 10 Of 57 table A-1. Aboveground Storage Tank Inventory Perry Point Vamc tank No. location capacity (gallons) product hi-level Alarm containment And Spill control Features d 311 wastewater Pumping station, Bldg. 311 1,000 diesel Fuel yes double Walled Tank, Spill Bucket dt 311 emergency Generator, Bldg. 311 75 diesel Fuel yes single Walled Tank; Secondary Containment Partially Provided By Building In Conjunction With active Measures d 315 boiler Plant, Bldg. 315 150,000 heating Oil no 164,000 Gallon Engineered Berm Consisting Of Soil And Concrete With A Pvc liner d 321.a chiller Plant, Bldg. 321 500 diesel Fuel no double Walled Tank, Spill Bucket dt 321.a emergency Generator, Bldg. 321 75 diesel Fuel yes double Walled Tank d 321.b chiller Plant, Bldg. 321 15,000 diesel Fuel yes double Walled Tank dt 321.b chiller Plant, Bldg. 321 700 diesel Fuel yes integral Secondary Containment d 321.c chiller Plant, Bldg. 321 15,000 diesel Fuel yes double Walled Tank dt 321.c chiller Plant, Bldg. 321 700 diesel Fuel yes integral Secondary Containment d 324 generator Bldg. 324 550 diesel Fuel no double Walled Tank, Spill Bucket d 325 generator Bldg. 325 550 diesel Fuel no double Walled Tank, Spill Bucket d 326 generator Bldg. 326 550 diesel Fuel no double Walled Tank, Spill Bucket d 327 generator Bldg. 327 500 diesel Fuel no double Walled Tank, Spill Bucket page 10 Of 57 table A-1. Aboveground Storage Tank Inventory Perry Point Vamc tank No. location capacity (gallons) product hi- Level Alar M containment And Spill Control Features d 329 generator Bldg. 329 550 diesel Fuel no double Walled Tank, Spill Bucket d 344 generator Bldg. 344 550 diesel Fuel yes double Walled Tank; Overfill prevention Device dt 344 generator Bldg. 344 25 diesel Fuel yes single-walled Tank; Secondary Containment Partially Provided By Building In Conjunction With active Measures d 360g filter Plant, bldg. 360g 2,000 diesel Fuel yes double Walled Tank, Spill bucket d-365 generator Bldg. 365 1,000 diesel Fuel yes double-walled Tank, Spill Bucket dt-365 emergency Generator, Bldg. 365 75 diesel Fuel no single-walled Tank; Secondary Containment Partially Provided By Building In Conjunction With active Measures d-507 salt Shed, Bldg. 507 500 diesel fuel no double-walled Tank d-11.a mobile Emergency generator (200 Kw) 100 diesel Fuel no double-walled Tank d-11.b mobile Emergency generator (200 Kw) 100 diesel Fuel no double-walled Tank d-11.c mobile Emergency generator (100 Kw) 100 diesel Fuel no double-walled Tank d-mobile remro (outside) Mobile Refueler 275 diesel Fuel n/a none d- Remro automotive repair Garage 500 heating Oil no sec. Containment Basin o-11 garage, Bldg. 11 275 used Oil no sec. Containment Basin total # Of tanks Perry Point Vamc 38 baltimore Vamc Aboveground Storage Tanks: table A-2. Baltimore Vamc Aboveground Storage Tank Inventory tank No. location capacity (gallons) product high-level Alarm containment And Spill Control Features ast 1 8th Floor, Room 8a-101 300 diesel Fuel no none ast 2 8th Floor, Room 8a-101 300 diesel Fuel no none ast 3 8th Floor, Room 8a-101 300 diesel Fuel no none total # Of Tanks baltimore Vamc 3 loch Raven Vamc Aboveground Storage Tanks: table A-3. Loch Raven Aboveground Storage Tank Inventory tank No. location capacity (gallons) product hi-level Alarm containment And Spill Control Features ast-1 building 1 (exterior) 2,000 diesel Fuel yes double-walled Steel Tank With Double-walled Underground Piping dt-1 emergency Generator Day Tank(exterior) 75 diesel Fuel no double-walled mobile Generator building 1 (exterior) 574 diesel Fuel yes double-walled total # Of Tanks Loch Raven Vamc 3 interested & Capable Responses: Must Respond With The Following Information. Must Answer The Subcontracting Questions Highlighted Below. contractors Must Also Provide The Following Copies: maryland Professional Engineering License / Certificate sp001 Inspector Certification - Aboveground Tank System Inspector nco 5 Is Seeking Responses From Entities That Are Interested In This Procurement And Consider Themselves To Have The Resources, Capabilities, And Qualifications Necessary To Provide The Services Required For The Washington Dc Va Medical Center. please Respond To This Rfi/sources Sought 36c24525q0295 With Your: business Name (including Unique Entity Id (sam.gov) business Type, Socio-economic Status (e.g., Veteran-owned, Woman-owned, Disadvantaged Small Business, 8(a), Etc.), And person Of Contact (including Telephone Number & Email Address). capability Statement And Summary Of Previous Experience Providing These Types Of Services For The Veterans Health Administration Or Other Similar Facilities. available Contract Vehicles (gsa Fss, Etc.) For Use By Department Of Va (include Applicable Naics) brief Summary Of Categories Of Services That Your Company Can/cannot Provide. certification(s) / Licenses For Meeting The Local Requirements To Provide These Services At The Dc Vamc (if Applicable) confirmation That Your Organization Has The Capability & Expertise To Meet The Performance Requirements While Complying With Applicable Limitations In Subcontracting By Responding To The Questions Below With Your Response: do You Intend To Self-perform This Effort? if You Are Located Outside The Immediate Area, How Will You Self-perform? or Do You Intend To Subcontract Work Under This Contract? if You Intend To Subcontract Work Under This Contract, How Will You Ensure Compliance With The Limitations On Subcontracting? response Instructions: responses Must Be Received By Tuesday, February 25th, 2025 @ 10:00 Am Est. Responses To The Information Requested Above Must Be Submitted Via Email To Bill Pratt at Billie.pratt@va.gov. And William.galletta@va.gov. subject Line Should Have: 36c24525q0295 | Response Sources Sought Notice | Company Name. this Request For Information/sources Sought Notice Is For Planning Purposes Only And does Not Constitute A Solicitation, Responses To This Notice Are Not Offers And Cannot Be accepted By The Government To Form A Binding Contract. The Results Of This Market research Will Assist In The Development Of (1) The Requirement, And (2) The Acquisition strategy (e.g., Sdvosb/sdvosb Set-aside, Small Business Set-aside, Full And Open competition, Etc.). Va Assumes No Responsibility For Any Costs Incurred As A Result Of A vendor S Attendance To The Site-visit Nor The Preparation Of Responses Submitted As A result Of This Notice. bill Pratt contract Officer vha, Nco 5

Details: Description I. Project Description The Project Involves The Design And Build Of A 3 Mld Water Treatment Facility, Inclusive Of A 3 Mld Water Treatment Plant (wtp), Raw Water Abstraction Facility, Raw Water Pipeline, Raw Water Impounding Lagoon, Product Pumping Station, 3 Phase Power Transmission Line And Product Water Transmission And Distribution Pipelines To Barangays Poblacion Norte And Poblacion Sur. It Also Includes One (1) Month Proving Period With Performance Guarantees On Specific Usages Of Power And Chemicals For The Production Of Potable Water That Meets The Philippine National Standards For Drinking Water. Ii. Conceptual Design The Project Concept Is To Construct A 3 Mld Water Treatment Facility Using Socon River As Raw Water Source. The Raw Water Will Undergo Series Of Processes To Remove Sediments, Microbes And Other Impurities To Ensure That The Water Reaching To The Consumers Complies With The Quality Set Forth In The Philippine National Standards For Drinking Water, Pnsdw. The Product Will Be Distributed To Barangays Poblacion Norte And Poblacion Sur. Iii. Proposed Project Components: 1. Raw Water Abstraction (intake) Facility 2. Raw Water Transmission Line 3. Impounding (raw Water) Lagoon 4. Lagoon Pumping Station 5. 3 Mld Water Treatment Plant 6. Residual Management Facility (sludge Lagoon) 7. Product Water Pumping Station 8. Power Supply 9. Product Water Transmission Line 10. Product Water Distribution Lines, Valves, Fittings And Other Appurtenances 11. Site Development • General Earthworks • Fence Below Are The Coordinates Of The Proposed Locations Of The Facilities: Table 1. Location Of The Proposed Facility Facilities Location Proposed Location Of The Facility 9°49’40” N, 124°12’43” E Iv. General Map Showing The Location Of The Proposed Water Treatment Facility V. Conceptual Design Of A 3 Mld Water Treatment Facility Vi. Approved Budget Of Contract The Total Capital Expenditure (capex) Requirement For This Project Is Php 115,000,000.00. The Project Is Financed Through A Term Loan Agreement With The Development Bank Of The Philippines. Progress Payments To The Contractor Shall Be Governed By The Terms And Conditions Set Forth In The Omnibus Term Loan Agreement And The Deed Of Undertaking, Duly Executed Between The Development Bank Of The Philippines And The Municipality Of Carmen, Bohol. Furthermore, These Payments Shall Adhere To The Pertinent Provisions Of The Implementing Rules And Regulations Of Republic Act No. 9184, The Relevant Coa Rules And Regulations, And Any Other Applicable Laws. These Terms And Conditions Are Hereby Formally Communicated To All Prospective Bidders Through This Provision. Table Below Summarizes The Component Cost Of The Capex. Capex Summary Component Cost, Php Site Development And Fencing Raw Water Abstraction Facility Raw Water Transmission Pipeline Raw Water Impounding Lagooon 3 Mld Water Treatment Plant Residual Management Facility Product Pumping Station Power Supply Product Water Transmission Pipeline Product Water Distribution Lines, Valves, Fittings And Other Appurtenances Engineering & Design Commissioning & Proving Period Temporary Facility Total Project Cost Php 115,000,000.00 Vii. Proposed Design & Construction Schedule The Project Must Be Completed Within One (1) Year From Receipt Of Notice To Proceed. Viii. Contractor’s Track Record And Performance Guarantee The Contractor Must Show Proof That It Has Previously Installed A Water Treatment Plant (“wtp”) With A Proven Capacity Of No Less Than 3.0 Mld Capable Of Treating River Water At Turbidity Level Up To 5,000 Ntu. The Said Wtp Should Demonstrate A Low Energy Consumption Not Exceeding 0.15 Kwh/m3 Within The Wtp Battery Limit. The Contractor Must Be Able To Successfully Demonstrate During The 7-day Performance Test That The Wtp Has Continuously Operated At A Production Rate Of No Less Than 3.0 Mld, Energy Consumption Not Exceeding 0.15 Kwh/m3 And Product Water Quality That Meets The Specifications Of The Philippine National Standard For Drinking Water. The Contractor Must Incorporate In The Design Of Its Wtp A Feature That Will Allow 100% Water Recovery And Zero Effluent Discharge. Ix. General Scope Of Works Of The Contractor The Contractor Is Required To Perform The Following Scope Of Works: 1. Review Of Existing Information Review The Basic Design Parameters And Detailed Scope Of Works. The Contractor Shall Ensure That It Has First-hand Information On The Site Development Plan, Construction Data, Geo-hazard Maps, Elevation And Other Gis Maps And Other Documents That Are Readily Available From The Project Owner. Such Will Be Used To Define Project Design Criteria And Serve As Basis For Any Changed Conditions And Establish Project Cost Estimates. Should Any Of These Data And Other Pertinent Data Be Unavailable, The Contractor Shall Carry Out The Needed Testing/investigation To Complete The Needed Design Data. 2. Field Survey And Site Inspection The Contractor Shall Conduct The Appropriate Site Survey Including Staking, Establishing Of Horizontal And Vertical Control Points, Benchmarks, Traverse And Profile Survey, And Stream Flow. 3. The Contractor Shall Have Inspected The Site And Its Surroundings And Orient Himself With The Following: A. Location And Nature Of Work; B. Climatic Conditions; C. Nature And Condition Of The Terrain; D. Geologic Conditions At The Site; E. Transportation And Communication Facilities; F. Availability Of Construction Materials, Labor, Water Services, Electric And Power Supply; G. Location And Extent Of Aggregate Sources; And H. Other Factors That May Affect The Cost, Duration And Execution Of The Work. 4. Pipeline And Structural Analysis The Contractor Shall Prepare The Necessary Structural Analyses, Calculations And Design Of Structural Members In Accordance With The National Building Code Of The Philippines, National Structural Code Of The Philippines And Other Relevant Codes. The Design Of The Main Structure And Its Appurtenances Shall Take Into Account Prevailing Conditions Of The Area To Attain The Optimum Safety Of The Whole Structure. The Contractor Shall Prepare The Pipeline Design On The Basis Of Data Obtained From Site Investigations And Survey Of The Proposed Water Source, Site For Water Treatment Plant, And The Location Of Pipelines, Materials And Other Investigations Necessary In Standard Engineering Practice To Ensure High Efficiency Of The Proposed Water System. 5. Hydraulic Analysis The Contractor Shall Make A Hydraulic Analysis That Form Part Of The Technical Documents To Be Submitted To Ascertain That The Water System Could Provide The Required Flow And Pressure Based On The Designed Population And Planning Period. At The End Of The Design Stage, The Contractor Is Expected To Produce The Appropriate Design And Construction Plans. 6. Permits And Licenses The Contractor Shall Be Responsible For The Application Of Necessary Permits, Clearances And Licenses From Local And National Agencies Having Jurisdiction Over The Project. No Commencement Of The Project Without First Securing The Said Documents. 7. Construction Works The Contractor Shall Perform The Following Construction Activities But Is Not Limited To The Following: A. Mobilization/demolition The Contractor Shall Mobilize And Bring Out Into Work, All Personnel, Plant And Equipment, In Accordance With His Approved Construction Program, Equipment Moving And Utilization Schedule And Manpower Schedule, From Its Regular Place Of Business To The Site To Undertake The Contract. Mobilization Shall Include The Obtaining And Transporting To Jobsite Of Equipment, Materials, Tools, Personnel, Constructional Plant And All Necessary Items For The Execution And Completion Of The Work And Shall Also Include The Setting Up And Verification Of All Equipment And Instruments Until It Is Rendered Operable. Demobilization Shall Include Dismantlement And Removal From The Site Of The Contractor’s Materials And Equipment And All Temporary Facilities. It Shall Also Include A Clean-up Of The Site After Completion Of The Contract As Well As Transportation From The Site Of The Contractor’s Personnel. B. Site Clearing And Proper Waste Disposal General Site Clearing Operations Include The Removal Of Demolished Materials And Objectionable Matter, Protection And Clearing To Allow For New Construction. The Contractor Is Obliged To Provide Barricades, Coverings, Or Other Types Of Protection Necessary To Prevent Damages. Likewise, He/she Is To Dispose Of Materials, Trash And Debris In A Safe And Acceptable Manner In Accordance With Applicable Laws And Ordinances. Burying And Burning Of Trash And Debris At The Site Will Not Be Permitted. Trash And Debris Shall Be Removed From The Site At Regular Intervals To Prevent These From Accumulating And Ultimately Delaying The Course Of The Work. Site Works B.1. Excavation, Foundations, Anchorage The Design And Quality Of Structural Materials To Be Used Shall Be In Conformity To The Governing Laws And To The Acceptable Engineering Practices. Footings, Foundation Elements And/or Anchorage Systems Shall Be Of The Appropriate Type, Of Adequate Size/s And Capacity In Order To Safely Sustain The Superimposed Loads Under Seismic Forces, Lateral Earth Pressure Or Any Condition Of External Forces That May Affect The Stability Of The Structure. Excavated Soil Shall Be Coordinated With The Lgu-carmen For Proper Disposal. C. Conduct Of Potability Test After Project Completion And Commissioning, The Contractor Should Conduct Water Potability Test With The Presence Of The Representative Of The End-user. X. Specifications & Parameters A. Scope Of Design And Build Of The Water Treatment Facility And Related Works The Necessary Works For The Design And Build Of The Water Treatment Plant Including Raw Water Abstraction Facility And Pipeline, Product Pumping Station, Potable Water Transmission Pipeline, Power Supply, Metering House And Interconnection At The Delivery Points Shall Include But Not Be Limited To The Following: 1. Design And Construct A 3 Mld Raw Water Abstraction Facility And Raw Water Transmission Pipeline. 2. Design And Construct A 30,000 Cubic Meter Raw Water Impounding Lagoon. 3. Design And Construct A Water Treatment Plant (wtp) That Can Treat Raw Water With A Turbidity Of Up To 5,000 Ntu With 100% Water Recovery And Zero Effluent Discharge. 4. Design And Install A Product Pumping System That Will Pump The Potable Water To The Target Areas. 5. Design And Construct The Power Supply System Needed To Run The Water Treatment Facilities Inclusive Of 3-phase Power Transmission Line, Transformers And Standby Generator Set. 6. Design And Install Product Water Transmission Line And Distribution Line For The Target Service Areas. 7. The Product Pumping And Pipe Sizing Must Be Designed That There Will Be At Least 10 Psi During Peak Hours. 8. Conduct Soil Investigation And Topographic Survey Of The Wtp Site. 9. Design And Construct Associated Civil Works Including Site Development For The Water Treatment Facilities, Site Utilities, Water Supply, Sewer And Drainage System. The Civil Works Shall Include But Not Be Limited To Foundation Works, Formworks, Concreting, Painting And Fencing. 10. Design, Supply And Install All Mechanical And Electrical Components Including Lightning Protection System For The Water Treatment Facilities, Instrumentation And Control Equipment And Accessories That May Be Deemed Necessary For The Efficient And Ease Of Operation Of The Water Treatment Facilities. 11. Provide Appropriate Electromagnetic (if Applicable) Flow Metering Devices For Inflow And Outflow Measurements. 12. Design And Construct Support Facilities Such As Chemical Storage & Control Room, Fence, Road Network, Etc. 13. Supervise Commissioning And Performance Testing Of The Wtp For One (1) Month Upon Issuance Of Mechanical Completion. 14. All Other Works Which May Be Reasonably Implied Or Nor Explicitly Described But Are Needed To Have A Complete And Efficiently Functioning Plant Shall Be Implemented/constructed By The Contractor At No Additional Cost To The Procuring Entity. B. Performance Specifications Of The Water Treatment Facilities And Related Works 1. Design Flowrates The Water Treatment Facilities Shall Be Designed For A Capacity Of 3 Mld. 2. Required Treatment Facilities And Performance Efficiency A. The Treatment Plant Shall Produce Treated Water Effluent Conforming To The 2017 Philippine National Standards For Drinking Water (pnsdw) As Shown In Table Below. The Wtp, Intake And Related Facilities Shall Be Designed With Expected Life Of 25 Years. Table 1. 2017 Philippine National Standards For Drinking Water Parameter Unit Analysis Taste Unobjectionable Odor Unobjectionable Color Apparent Tcu 10 True Tcu 5 Turbidity Ntu 5 Aluminum Mg/l 0.20 Chloride Mg/l 250 Copper Mg/l 1.0 Hardness Mg/l 300 As Caco3 Hydrogen Sulfide Mg/l 0.05 Iron Mg/l 1.0 Manganese Mg/l 0.4 Ph 6.5-8.5 Sodium Mg/l 200 Sulfate Mg/l 250 Total Dissolve Solids Mg/l 600 Zinc Mg/l 5 Arsenic Mg/l 0.01 Boron Mg/l 0.5 Cadmium Mg/l 0.003 Lead Mg/l 0.01 Benzene Mg/l 0.01 E. Coli Or Thermo Tolerant (fecal) Coliform Bacteria No./100 Ml Nil B. Design And Operate The Plant Free From Any Discernable Odor And Noise Louder Than 55 Decibels At The Site Boundary. C. The Contractor Must Incorporate In The Design Of Its Wtp A Feature That Will Allow 100% Water Recovery And Zero Effluent Discharge D. The Annual Average Chemical Usage Should Not Exceed Php 1.00/m3 E. The Power Unit Usage Within The Proposed Wtp Battery Limit (excluding Intake And Product Pumping) Should Not Be More Than 0.15 Kwh/m3. F. The Raw Water Pipeline And Product Water Pipelines Must Withstand A Pressure Of At Least 100 Psi. 3. Minimum Design Requirement The Water Treatment Facilities Must Be Designed To Prevent Total Plant Shutdown When Undergoing Pump Maintenance Works. As Such, There Should Be At Least One Duty And One Stand-by Item Of Equipment To Allow The Plant To Operate At Any Given Time With A Full Process Flow Capacity At The Desired Efficiency During Equipment Replacement/repair Or Maintenance Servicing Or Cleaning. Equipment Upon Which The Plant Is Dependent For Full Operation Must Also Be Provided With Standby. A. Design All Plant Structures To Withstand Pressures And Seismic Loading In Accordance With The National Structural Code Of The Philippines. However, For Structural Concrete, The 28-day Compressive Strength Shall Not Be Less Than 21 Mpa. B. The Minimum Design Requirement For All Buildings Shall Be Concrete Foundations And Floors, Concrete Structural Elements, Galvanized Steel Trusses And Roof Frame, Reinforced And Filled Concrete Block Walls With Rendering And Painting, Bonded-color Steel Roofing System, Suspended Ceilings, Tiled Floors For Office Areas, Ceramic Tiling For Showers, Toilets And Similar Areas, Concealed And Under-floor Service Conduits And Pipelines And Air Conditioning For Office Areas. C. Electrical Power Supply And Control System And Requirements I. The Electrical Power Supply And Control System Shall Include But Not Limited To The Main And Branch Circuit Overcurrent Protective Devices, Motor Controllers Including All Protective And Monitoring Relay Systems Required For The Complete Operation Of The Plant And All Necessary Wiring, Conduits And Grounding Systems. Electrical Power And Control System Shall Be Wired So That The Various Items Of Plant Equipment Can Be Operated Either Manual Or Automatic To Achieve The Intended Sequence Of Operation. Process Control Shall Be Situated At The Motor Control Centers (mcc). Ii. Factory Wired Plant Components Shall Be Interconnected So As To Be An Integral Part Of The Plant. Iii. Provide Surge Protection To Prevent Damage To Electric Motors And All Other Electrical And Electronic Components During Fluctuation Of Voltage, During Resumption Of Power Supply After A Power Interruption And From The Effects Of Lightning. 4. Facilities Description And Specifications All Processes And Facilities Shall Be Designed To Meet The Performance Requirements For The Proposed Project. The Inter-connectivity Between Various Plant, Support Services And Structures Must Be An Integrated Approach To Meet Operational Performance, Flexibility, Maintenance And Reliability Criteria. The Power Unit Usage Within The Battery Limit Of The Proposed Wtp Shall Not Be More Than 0.07 Kwh/m3. The Water Treatment Plant May Include But Not Be Limited To The Following Main Process System, Support Systems And Relevant Facilities: A. Raw Water Abstraction Facility The Raw Water Abstraction Facility And Pipeline Shall Have A Capacity Of 3 Mld. The Natural Flow Of The River Shall Not Be Obstructed Or Changed By Constructing A Dam, Weir, Or A Similar Structure That Could Result To Flooding Of The Nearby Properties. The Abstraction Facility Shall Consist Of The Following: • Intake Weir, Water Collection Channel And Water Collection Well • 2 Units Submersible Non Clog Pump (1 Running And 1 Spare) With Motors And Variable Frequency Drive • Pipe Lay-out • Electrical Systems And Controls B. Raw Water Pipeline The Raw Water Pipeline Must Be Made Of Spiral Welded Steel Pipe. Pipes To Be Used Must Pass The Required Test Set By The Appropriate Authority. Pipes Shall Be Laid At A Minimum Depth Of 60 Cm. Pipe Sizing Should Be In Conformance To The Hydraulic Analysis C. Raw Water Impounding Lagoon The Impounding Lagoon Have A Capacity Of A Least 30,000 M3 And Will Be Lined With Hdpe Geosynthetic Lining The Lagoon Will Also Be Installed With The Pumping System That Will Pump Water From The Lagoon To The Water Treatment Plant. The Lagoon Pumping Station Will Comprise Of 2 Units (1 Pump Running And 1 Pump Spare) Submersible, Non-clog Pumps, With A Capacity Of 3mld And A Head Of 15 Meters. D. Water Treatment Plant The 3mld Water Treatment Plant (wtp) Must Be Able To Handle And Process Incoming Raw Water With Turbidity Levels Up To 5,000 Ntu. The Wtp Shall Include But Not Limited To Receiving Well, Mixing Channel, Flocculation Basin, Sedimentation Basin, Rapid Sand Filters, Chlorination, Chemical Dosing Equipment, Clear Water Tank And Sludge Management. The Wtp Shall Be Able To Produce An Effluent That Meets The Parameters Prescribed In The 2017 Philippine National Standards For Drinking Water (pnsdw). The Wtp Should Make Use Of Gravity Flow To The Extent Possible Which Minimizes The Use Of Energy For Pumping Resulting In Low Operation Costs. It Shall Incorporate A Zero Effluent Discharge Design And Will Make Use Of An Activated Filter Media System. • Receiving Well Provide A Receiving Well At The Proposed Wtp (with A Flow Measurement Or Device) To Receive Raw Water From The Intake Facilities. Pre-chlorination And Coagulant Dosing Shall Be Done At The Receiving Well • Rapid Mix-flocculation-sedimentation Provide A 2-stage Flocculation Chamber With Agitators For Proper Dispersion And Formation Of Flocs And A Sedimentation Basin For The Separation Of The Flocs By Gravity Settling. It Shall Have Provision For Removal Of Sludge. It Should Minimize Hydraulic Head Losses Between Units To Allow Future Changes In Processes Without The Need For Re-pumping. Rapid Mix The Rapid Mix Shall Mean The Rapid Dispersion Of Chemical Through The Water To Be Treated, Using Violent Agitation. The Tanks Should Be Made Of Concrete, Equipped With Devices Capable Of Adequate Mixing For All Process Treatment Flowrates. The Retention Time Should Not Be More Than 10 Seconds. The Rapid Mix Shall Be Designed In Close Proximity With The Flocculation Tanks. Flocculation Flocculation Shall Mean The Agitation Of Water At Low Velocities For Long Periods Of Time. Inlet And Outlet Of The Tanks Shall Be Designed That It Will Minimize Short-circuiting And Destruction Of Flocs. The Tanks Shall Be Made Of Concrete And Waterproof From Wall To Wall. Drain Or Pump Shall Be Provided To Handle Dewatering And Sludge Removal In A Short Period Of Time, When Necessary. The Inlet And Outlet Velocity Should Be Between 0.15 M/s, And 0.45 M/s With A Detention Time For Flocs Formation Of At Least 20 Minutes. Sedimentation Sedimentation Shall Follow Flocculation. The Following Criteria Shall Apply To Conventional Sedimentation Units: - The Sedimentation Tank Shall Complete With Inlet And Outlet Structures, Sludge Collection And Removal Mechanism, Isolation Valves And Gates, Drainage And Safety Ladder, Catwalks And Manholes. - The Surface Overflow Or Settling Rate Should Not Be More Than 2.0 M/h. - Inlet Shall Be Designed To Distribute The Water Equally And Uniformly. The Inlet Velocity To The Sedimentation Tanks Should Not Be More Than 0.3 M/s. - Basins Should Be Provided With Sludge Collection And Removal Mechanism. Valves Shall Be Provided To Isolate For Maintenance Purposes. It Shall Be Designed To Eliminate Or Minimize Clogging. Cleaning Or Removal Of Sludge Through The Use Of Sludge Disposal Pump Shall Be Designed In Such A Way That It Could Be Facilitated/completed In A Short Period Of Time. The Sludge Shall Be Conveyed To The Sludge Lagoon Through The Drainage Facilities. • Filtration System The Filtration System Shall Serve As The Final Stage Of Treatment To Remove Suspended Solids And Colloids. It Shall Compose Of The Activate Media Filter System. The Proposed Filter Shall Also Include The Following: A Minimum Of 8 Units Of Filters With Capability To Meet Plant Capacity Even If One (1) Filter Is Taken Out For Service Or Backwashing; An Automatic Backwashing System Complete With Controls And Motorized Gates And Valves; Wash Water Collection System And An Underdrain System That Efficiently Collect The Filtered Water. Filter Run Time Should Be Between 24 And 72 Hours. Each Filter Bed Shall Be Designed For A Filtration Hydraulic Loading Rate Of Not More Than 12 M3/m2-hr When One Filter Is Out Of Service. The Multimedia Filter Shall Operate 24 Hours Per Day Whole Year Round At The Design Capacity Of 3 Mld Regardless Of The Quality Of The Raw Water. The Filter System Shall Be Designed Such That No Power Is Required During Normal Operation And During Backwash Time. The Production Capacity Of The Filtration System Should Not Be Affected And Remains The Same At 3 Mld Even When One Cell Is Undergoing Backwash Operation. - The Filtration System Shall Be Structurally Designed Sound And Safe, Made Of Reinforced Concrete, Complete With Vertical Walls Within The Filter With No Protrusion Of The Filter Walls Within The Filter Media; Head Room To Permit Normal Inspection And Operation; Walkways, Ladder Rungs And Manhole Covers Shall Be Provided As Necessary For Easy Access And Maintenance. Walkways Shall Be Provided With Stainless Steel Safely Handrails. - Appurtenances The Following Shall Be Provided For Each Filter Cell: Water Inflow Control, Backwashing Pipes And Valves, Underdrain That Will Allow Filtered Water To Flow By Gravity At Wtp Capacity And Reverse Flow During Backwashing By Gravity To Remove Accumulated Sludge. • Disinfection Facility The Disinfection Facility Shall Cover The Pre Chlorination And Post Chlorination Requirement Of The Water Treatment Plant. Provide A Disinfection System That Will Be Used To Kill Pathogenic Microorganisms. There Should Be Sufficient Excess Of Chlorine For Disinfection Including A Free Residual Chlorine Concentration Of 0.5 – 0.7 Mg/l. The Disinfection System Shall Include All Equipment Such As Chlorine Dosing Pump And Other Miscellaneous Items Necessary For Disinfection Using Granular Chlorine. The Chemical Dosing System Shall Be Located Near The Receiving Well. A Storage Area Of Capable Of Handling At Least 30 Days Of Chemical Shall Be Provided. The Disinfection Facility Shall Be Capable Of Applying The Following Dosages At The Plant’s Design Flow Rate: Minimum Dose 0.30 Ppm Average Dose 1.00 Ppm Maximum Dose 5.00 Ppm • Chemical Feeding System Provide Complete Chemical Feeding System For Dissolving And Injecting Various Chemicals To Support The Rapid Mix And Coagulation Process. Include Batch Tanks, Storage Tanks, Mechanical Mixers, Metering Screws, Pipe Work, Valves, Fittings And Associated Equipment. The Feeding Systems Shall Be Located Inside The Chemical Building. The System Shall Be Arranged To Accept Chemical Supply In Both Liquid And Powder Forms. Equip The System With Ladders, Walkways, Platforms, Handrails And Cages To Allow Safe Access To The Equipment For Operations Staff. Locate Standpipes And Hoses Near The Equipment For Maintenance. E. Sludge Lagoon The Sludge Lagoon, Or The Residual Management Facility Must Have A Capacity Of At Least 500 M3. This Must Be Designed That There Is 100% Water Recovery And Zero Effluent Discharge. F. Product Pumping Station The Treated Potable Water Will Be Pumped To The Target Service Areas With A Residual Pressure Of No Less Than 10 Psi During Peak Hours. Two Units Of Centrifugal Pump Should Be Installed (1 Running And 1 Spare) Capable Of Delivering The Requirement 3 Mld. G. Power Supply Power Supply Facility Is Inclusive But Not Limited To The Following: • 3- Phase Line With Primary Voltage Recloser (depending On Electric Cooperative Requirement) • Distribution Transformer • Stand By Generator Set With Automatic Transfer Switch The Specifications Of The Transformers And Generator Set Must Be Based On The Calculations On The Total Load Of The Whole Water Treatment Facility. H. Product Water Transmission Pipeline The Potable Water Pipeline Must Be Made Of Hdpe Pipe. Pipes To Be Used Must Pass The Required Test Set By The Appropriate Authority. Pipes Shall Be Laid At A Minimum Depth Of 60 Cm. Pipe Sizing Should Be In Conformance To The Hydraulic Analysis. Quality Assurance For Buttfuse Works Must Be Performed To Ensure That There Will Be No Leaking During Operation. The Pipes Must Be Able To Withstand A Pressure Of No Less Than 100 Psi. Estimated Length Are As Follows: Description Length 10” Mm Ø 2,058 Meters 8” Mm Ø 1,254 Meters 6” Mm Ø 3,882 Meters 4” Mm Ø 464 Meters I. Product Water Distribution Lines, Valves, Fittings And Other Appurtenances The Potable Water Pipeline Must Be Made Of Hdpe Pipe. Pipes To Be Used Must Pass The Required Test Set By The Appropriate Authority. Pipes Shall Be Laid At A Minimum Depth Of 60 Cm. Pipe Sizing Should Be In Conformance To The Hydraulic Analysis. Quality Assurance For Buttfuse Works Must Be Performed To Ensure That There Will Be No Leaking During Operation. The Pipes Must Be Able To Withstand A Pressure Of No Less Than 100 Psi. Corresponding Valves And Fittings Ang Interconnection To The Main Transmission Line Must Be Installed. Estimated Length Are As Follows: Description Length 3” Mm Ø 3,756 Meters 2” Mm Ø 6,900 Meters J. Auxiliary Facilities I. Chemical Storage The Storage Area Should Be Able To Handle Various Chemicals For 30 Days Plant Operation At Full Capacity. The Building Should Satisfy And Follow All The Necessary Safety Requirements In The Operation Of The Chemical Building. Ii. Fence Provide Inter-link Fence Around Entire Parameter Of The Plant Site. Locate Fence To The Correct Boundary And Provide Certified Survey Of Fence After Installation. Include Vehicular Gate At Entrance Roadway And An Adjacent Personnel Gate With Gate Restraints, Chains And Locks. Perimeter Lighting Shall Also Be Provided. Iii. Road Provide Paved Road Network Servicing All Areas Of The Plant And Incorporating Geometric Design And Traffic Management Features To Ensure A Free Flow Of Vehicles. Iv. Support Systems Potable Water Supply System Provide A Complete Potable Water Supply System For Drinking Water, Staff Amenities, Chemical Dilution, Cleaning, Toilets, Lavatories, Essential Process Requirements, Fire Lighting And All Other Applications. Water Shall Come From The Product Water Tank. Drainage System Provide Complete Drainage System (to Flow By Gravity) For All The Buildings, Road Networks, Water Treatment Perimeter, And Essential Area. A Separate Drainage System Shall Be Provided To Convey (by Gravity) The Sludge From The Sedimentation Basin And The Backwash Water From The Rapid Sand Filler And Other Waste Water From The Proposed Wtp Into The Sludge Lagoon Located At The Nearby Existing Wtp. Electrical Power And Control System Provide A Complete Electrical And Control System For The Plant Including The Site. Fire Control & Alarm System Provide A Complete Fire Protection Such As Smoke Detector And Alarm System In All Buildings, Control Room, Laboratory And Related Facilities And Shall Be Complying With The National Building Code Of The Philippines. Provide Fire Extinguishers At Strategic Location Inside The Plant And Support Structures. The Alarm System Shall Be Designed Audible To A Minimum Distance Of 30 Meters. Lightning Protection And Grounding System V. Miscellaneous Items That Are Deemed Necessary Provide All Necessary Items/works To Have A Complete And Efficiently Functioning Plant. 5. Process Performance Test And Guarantee, Proving And Warrantees A. After The Issuance Of The Certificate Of Completion, The Contractor Shall Supervise The Performance Testing Of The Wtp And Training Of The Procuring Entity Personnel Within A Period Of One (1) Month. The Procuring Entity Shall Supply The Operation And Maintenance Manpower And All Materials, Utilities Including Power, Fuel, Lubricants, Chemicals, Facilities, Services And Other Items Needed To Operate And Maintain The Plant. The Contractor Shall Be Responsible For The Cost Of Parts Or The Facility That May Have To Be Replaced During The Proving Period. B. The Contractor Shall For Thirty (30) Consecutive Day Demonstrate That The Completed Wtp Shall Operate In Accordance To Stated Performance Specifications And Parameters. C. The Contractor Shall Be Responsible For Making All Remedial Measures To Bring The Plant Performance And Efficiency To The Specified Level. Failure Of The Contractor To Complete All Remedial Measures Shall Authorize The Procuring Entity To Confiscate The Performance Security Or The Performance Guarantee Bond As The Case May Be And To Retain All Monies Due To The Contractor Without Prejudice To Procuring Entity's Right To File A Damage Suit. D. The Power Unit Cost Per Cubic Meter Of Treated Water At The Proposed Wtp Battery Limit Should Not Be More Than 0.15 Kwh/m3 E. The Annual Average Chemical Usage Should Not Exceed Php 1.00/m3 F. The Contractor Shall Provide One (1) Year Mechanical Warranty. G. The Contractor Shall Provide Lifetime Technical Advisory Service To The Procuring Entity. Xi. Bid Proposal Inclusions In The Preparation Of The Proposal, The Bidder Should Ensure That The Following Are Included In The Submission: 1. Technical Drawings A) Process Flow Diagram And P&id B) Site Development Plan C) Key Components Lay-out Plan D) Electrical Sld And Estimated Energy Requirement E) Conceptual Drawings And 3d Rendition Of The Water Treatment Plant And Other Facilities 2. Schedules A) Pert/cpm Network And Bar Chart/s-curve Schedule (design Stage And Construction Stage Should Be Well Defined In The Schedule. B) Manpower And Equipment Schedule C) Financial Periodic Cash Requirement 3. Capital Expenditures Proposal The Bid Should Have A Detailed Cost Breakdown Of The Components Of The Project: A) Detailed Engineering Design B) Water Treatment Plant C) Support Facilities D) Wastewater And Sludge Management Facility E) Utility Power Supply Including Transformers And Transformer Pad. F) Site Development (fencing, Road Network, Lightings, Drainage, Etc.) G) Commissioning And Testing H) Proving Period Cost Of The Inclusions Such As Hydrological And Geotechnical Studies, Site Surveys, And Insurances, May Be Individually Included In The Cost Breakdown Of The Components Where It Will Be Used. Proposal Should Also Include The Cost Of One (1) Month Of Testing And Commissioning. Cost Of Electricity And Chemicals To Be Used During The One-month Period Of Proof Of System Operations And De-bugging Must Be Become By The Bidder 4. Operations Expenditures Breakdown A Detailed Breakdown Of The Operations Expense Should Be Submitted With The Following Specifications: A) Power: • Include The Estimated Electric Consumption Starting From The Intake And The Wtp Process – Including Wastewater And Sludge Management Facility; • Electric Consumption Should Be Stated In Kwh Per Cubic Meter; • Electric Consumption Should Also Be Stated As A Philippine Peso Value Per Cubic Meter Using Php 9.00 Per Kwh As The Electric Cost. B) Chemicals: • Breakdown Of Chemical Consumption Per Cubic Meter Should Be Presented; • Chemical Consumption Per Cubic Meter Should Be Stated In Philippine Peso Value; Xii. Ded Submittal 1. Design Report, Construction And Shop Drawings A. The Design Report Shall Contain All Engineering Design Details Related To The Project Including Electrical And Mechanical Design, Structural Design And Bill Of Materials. All Design Calculations Shall Be Orderly Compiled And Submitted To The Procuring Entity As An Integral Part Of The Design Report. B. The Technical Specifications Of The Major Equipment Should Be Submitted C. The Drawings Shall Show The Complete Assembly Of The Plant With All The Equipment And Appurtenant Components. The Layout Shall Indicate The Relative Location Of The Plant With Respect To The Boundary Of The Lot. D. The Drawings Shall Show Complete Construction Details For Each Component, Piece Of Equipment, Support Structure And Access Facilities. 2. Drawings A. Drawings For Approval Drawings To Be Submitted By The Winning Bidder For Approval Shall Be Of Size A3. 3. Operation & Maintenance Manuals And List Of Spare Parts Prepare And Submit Draft Operation And Maintenance Manual With Lists Of Spare Parts For The Plant Including All Equipment, Thirty (30) Calendar Days Before The Intended Completion Date. Submit The Completed Operation And Maintenance Manual Within Two Weeks Of Receiving Review Comments In The Form Of Two Digital Copies On Cd And Four Hard Copies Using The Latest Versions Of Word And Autocad With Supplementary Drawing And Image Files In Pdf Format. Manuals Shall Be In Metric, A4 In Size With Three Ring Binders With Durable Hard Covers. Drawings Shall Be In Metric, A3 Size Covers And Held Together Using Three Removable Brass Male/female Screws. All Drawings Shall Be In A3 Size. The Operation And Maintenance Manuals Shall: I. Cover All Aspects Of The Works Ii. Provide 'general Principles Of Operation' For The Plant. The General Principles Of Operation Shall Be Prepared By The Designers And Should Include The Necessary Information For Operators To Effectively Operate And Maintain The Works. Iii. Incorporate Safety, Environmental And Quality Issues. Iv. Have Detailed Indexes And Cross Referencing. V. The Operations Manual And The Maintenance Manual Shall Be Bounded Separately. A. Operation Manual A Single Operation Manual Shall Be Provided For The Operation Of The Plant. The Manual Shall Include But Not Be Limited To: I. Title Page: Project, Procuring Entity's And Contractor’s Name, Address And Telephone Number And Contract Number. Ii. Index: Include A Comprehensive Index Iii. General Description • Location • Site Layout, Process And Instrumentation Diagrams, Hydraulic Profile • Description Of Process And Effluent Criteria • Design Criteria Iv. Safety Management V. Environmental Management Vi. Detail Operation (for Each Process Unit) • Describe Each Process Unit Including Size And Number Of Mechanical/ Electrical Units • Mode Of Operation (start, Shutdown, Manual And Auto Control) • Performance Criteria For Each Process Unit/facility • Sampling Points • Troubleshooting • Record Keeping Requirements • Duty Statements (for Operators) • Operating Procedures (covering Safely And Environmental Procedures) • Environmental And Emergency Response • Sampling And Monitoring Requirements - Include Performance Criteria For Each Process Unit - Monitoring Of The Receiving Environment (waterways, Noise And Odors) • Cross Reference To Maintenance Manuals - Provide Maintenance Manuals To Support This Operations Manual For All Mechanical And Electrical Equipment. B. Maintenance Manual Prepare Maintenance Manuals For All Individual Items Of Equipment. The Manuals Shall Include But Not Be Limited To: I. Title Page: Project, Procuring Entity's Name, Address And Telephone Number, Contractor's Name, Address And Telephone Number And Contract Number. Ii. Index: Include A Comprehensive Index. Iii. Description: A Full Description Of The Equipment With A Tabulation Of Dimensions And Performance Ratings. Iv. Principles Of Operation: Basic Working Description, Including Novel Features And Any Automatic Control. V. Operating Instructions: A Step-by-step Procedure Organized In Sections Containing The Following: • Pre-start Check-up • Starting • Continuous Operation • Stopping • Emergency Stopping • Abnormal Operation (as Applicable) Vi. Installation And Commissioning Instructions: Details Of Standards And Procedures For Transporting And Installing The Equipment. Including A Step-by-step Procedure For Mounting Or Erecting, Wiring And Lubricating The Equipment. Alignment Tolerances And Check Requirements Shall Be Stated. Vii. The Commissioning Instructions Shall Include Step By Step Procedures Before And During Start-up, After Starting And Operational Tests During Continuous Operation. Viii. Routine Maintenance - Step By Step Procedure For Preventive Maintenance Work Carried Out At Intervals Of 2 Weeks Or Less. Ix. Periodic Maintenance: Step By Step Procedure For Fault Correction And Preventive Maintenance Carried Out At Intervals In Excess Of Two Weeks, Involving Replacement Of Spare Parts And Consumables. A List Of Special Tools Shall Be Included. X. Test Data And Troubleshooting: Instructions To Qualified Tradesmen For Assessing The Operational Performance Of The Equipment. Xi. Spare Parts List: Illustrations And Schedules For Identification And Specifications Of All Items In The Equipment. Exploded Diagrams Are Required. The Recommended Spare Parts Stock For One Year Shall Be Indicated. Xiii. Personnel & Equipment Requirement The Bidder Must Demonstrate That It Has Designed And Constructed Similar Water Treatment Facilities And Has The Personnel For The Key Positions That Meet The Following Requirements: Item Position Total Work Experience (years) Similar Work Experience (years) 1 Project Manager 10 5 Design 2 Water Treatment Specialist (chemical Engineer) 5 3 3 Sanitary Engineer 5 2 4 Professional Mechanical Engineer 5 3 5 Professional Electrical Engineer 5 3 6 Structural Engineer 5 2 Build 7 Project Engineer 5 3 8 Civil Engineer 5 3 9 Mechanical Engineer 5 3 10 Electrical Engineer 5 3 11 Safety Officer 5 2 The Contractor Shall Provide Details Of The Proposed Personnel And Their Experience Records. C. Equipment The Contractor Must Demonstrate That It Will Have Access To The Key Equipment Listed Hereafter: Item Equipment Type And Characteristics Quantity 1 Dump Truck 1 2 Backhoe 1 3 Roller Compactor 1 4 Concrete Vibrator 1 5 Bagger Mixer 2 6 Bar Cutter 1 7 Welding Machine 1 8 Boom Truck 1

Details: Description Subject : Design And Build Of Dedvmh Nutrition And Dietetics Service Facilities Location : Dedvmh Compound, Bood, Ubay, Bohol Terms Of Reference I. Background Don Emilio Del Valle Memorial Hospital (dedvmh) Is A Licensed Level 2 General Hospital Located In Ubay, Bohol With 200 Authorized Bed Capacity Which Aims To Provide Highly Specialized Quality Healthcare Services To All Where Human Dignity Is Valued And Respected By Competent And Committed Personnel. In Accordance With The Provisions Of And Related Issuances Of Doh Administrative Order No. 2019-0056 Increasing The Bed Capacity Of Dedvmh From 50 Beds To 300 Beds And R.a. No. 11223, Or The “universal Health Care Act”, The Hospital Shall Provide Promotive, Preventive, Diagnostic, Curative, And Palliative Care Services, And Research, Professional Teaching And Training Programs And Shall Be Fully Equipped With The State-of-the Art Equipment And Facilities, Complemented By Adequately Trained And Competent Human Resources For Health Appropriate For A Licensed And Accredited Tertiary General Hospital. Dedvmh Shall Strengthen Its Existing Basic Services, And Aim For The Improvement Of Its Service Capability And Capacity Serving As Referral Hospital In The Northeastern Section Of The Bohol Province, Complementing Local Health Systems And Providers Of Municipalities In The Area. In Order To Fulfill This Mandate, Dedvmh Is Upgrading Its Services To Become A Level Iii Hospital To Provide Better And Quality Healthcare Services Especially In The Northeastern Part Of Bohol, Its Catchment Areas And Nearby Provinces. The Increase In The Bed Capacity And Expansion Of Services And Capability Are Consistent With The Dedvmh’s Hospital Development Plan (hdp) And Philippine Health Facility Development Plan (phfdp) 2020-2040. Ii. Objectives As Food Preparation Is Part Of The Critical Functions In Delivering Quality Healthcare Service, It Is Important That Its Site Be Given Adequate Repair And Renovation. The Objective Is To Repair And Expand The Existing Dietary Area Resulting To A More Spacious, Comfortable And Hygienic Station For Its End-users To Work Around. The Improvement Is Expected To Evoke A Less Stressful Environment And Increased Productivity Among Workers. The Design Must Also Conform To The Standards Of Set By In Accordance To The Manual On Technical Guidelines For Hospitals Planning And Design (level 3) And Doh Green And Safe Health Facilities Manual To Develop Climate Smart Health Facilities That Address And Adapt To The Impacts On The Environment. The Winning Bidder Shall Design For This Project With The Approval Of The Medical Center Including The Approved Detailed Estimates, Bill Of Quantities, Technical Specifications, And Methodology Of Construction And Scope Of Works Of The Project. Iii. Conceptual Design The Design Concept Of The Project Was Governed By The Planning And Design Standards Of Level 3 Service Capability Hospital Facility As Prescribed By The Latest Requirements Of The Department Of Health And Other Concerned Agencies. Building Design Shall Conform To The Provisions Of The National Building Code Of The Philippines (pd 1096), Accessibility Law (bp 344), Architecture Law (ra 9266), National Structural Code Of The Philippines, Electrical Engineering Law (ra 7920), Mechanical Engineering Law (ra 5336), Plumbing Code (ra 1378, 1993-1994 Revisions), Fire Code (ra 9514) And Other Laws And Regulations Covering Environmental Concerns And Local Ordinances And Regulations. The As-built Plan And Proposed Schematic Lay-out/call-out Will Be Provided As Basis Reference In The Development Of Preliminary Conceptual Design Plans To Be Submitted As Part Of The Technical Proposal. However, It Is The Responsibility Of The Bidder To Verify Actual Site Conditions And Dimensions. The Preliminary Conceptual Design Plans And Perspectives Shall Be Included Construed Part Of The Technical Proposal As Follows: Preliminary Conceptual Design Plans Required Specified Degree Of Details 1. Schematic Floor Plans: A. Ground Floor All Schematic Plans Shall Be At Least A3 Size Paper And Shall Meet The Minimum Space Requirements And Planning/design Guidelines Of Level 3 Hospital For: - Existing Dietary Complex Expansion And Improvement - Into Nutrition And Dietetics Service Facilities Preliminary Conceptual Design Plans Required Specified Degree Of Details A. Aerial Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. B. Man’s Eye / Worm’s Eye Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. C. Front Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. D. Rear Perspective View In Conformance With The Preliminary Conceptual Plans And At Least 3d Rendered. E. Left & Right-side Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered F. Longitudinal And Transverse Section Plans At Least One Longitudinal And One Transverse Section Plans In At Least A3 Size Paper The Conceptualization Of The Design Including Its Specifications And Space Requirements Shall Complement And/or Supplement With The Existing Site Conditions And Specification Of The Existing Dietary Area At Ground Floor. Proponent’s Input, Suggestion And Recommendations With Regard To The Identification Of The Scope Or Physical Components And Structures, Specific Outputs And Requirements And Proposed Construction Methods Shall Be Considered. Iv. Performance Specifications And Parameters Site And Space Planning Were Governed By The Standards, Rules And Regulations On The Design Of Level 3 Hospitals As Prescribed By The Department Of Health And Other Concerned Agencies. Building Design Shall Conform To The Provisions Of The National Building Code Of The Philippines (pd 1096), Accessibility Law (bp 344), Architectural Law (ra 9266), Civil Engineering Law (ra 544), National Structural Code Of The Philippines, Electrical Engineering Law (ra 7920), Mechanical Engineering Law (ra5336), Plumbing Code (ra 1378, 1993-1994 Revisions), Fire Code (ra 9514) And Other Laws And Regulations Covering Environmental Concerns And Local Ordinances And Regulations. A. Pre-detailed Design 1. Engineering Surveys And Investigations 1.1 Surveys And Investigations Of The Site Includes Elevations And Contours (at 0.5m Interval), Soil Tests, Location, Dimension, Floor Elevations And Other Pertinent Data On Existing Buildings And Improvements (roads, Parking Areas, Mature Trees) And Existing Utility Lines (e.g. Water, Power, Telephone). 2. Preliminary Conceptual Design Plans/perspective 2.1 Preparation Of The Following Drawings For Design Development Based On The As Built Plan And Schematic Lay-out/call-out Prepared By The Procuring Entity. Please Refer To Section Iii. Conceptual Design. B. Detailed Design Preparation Of Final Design Concept And Detailed Architecture And Engineering Design Shall Be In Accordance With The Schematic Plans For Hospital Building And Design Conceptualization Duly Approved By The Dedvmh. In Determining The Final Design Concept And Detailed Architecture And Engineering Design, The Implementing Unit Together With The Design And Build Contractor Shall Initiate The Coordination Meeting With The Concerned Stakeholders In The Following Schedule: First Session - The Design And Build Contractor Shall Present The First Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents Within Ten (10) Calendar Days From The Effectivity Of Notice To Proceed Second Session - The Design And Build Contractor Shall Present The First Revision Of Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents, If There Any, Within Twenty (20) Calendar Days From The Effectivity Of Notice To Proceed Third Session - The Design And Build Contractor Shall Present The Second Revision Of Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents, If There Any, Within Thirty (30) Calendar Days From The Effectivity Of Notice To Proceed Upon Approval Of The Final Schematic Plan And Design Concept, The Design And Build Contractor Shall Then Proceed For The Design Phase, Enumerated As Follows: 1. Preparation Of The Following Detailed Design Drawings Of Entire Building (see Doh Checklist Of Drawings Requirements) Based On The Design Development Drawings And Design Parameters Including Any Revisions And Refinements As Approved And Required By The Dedvmh: A. Detailed Architectural Plans (refer To Checklist Of Drawings Requirements And Design Parameters). B. Detailed Structural Plans (refer To Checklist Of Drawings Requirements And Design Parameters). C. Detailed Electrical Plans (refer To Checklist Of Drawings Requirements And Design Parameters). D. Detailed Storm Drain, Sanitary And Plumbing Plans (refer To Checklist Of Drawings Requirements And Design Parameters). E. Detailed Mechanical Plans (refer To Checklist Of Drawings Requirements And Design Parameters). F. Structural Computations, Including Soil Boring Test Results And Seismic Analysis And Electrical Design Computations. G. General Notes And Technical Specifications Describing Type And Quality Of Materials And Equipment To Be Used, Manner Of Construction And The General Conditions Under Which The Project Is To Be Constructed. H. Detailed Cost Estimates, Detailed Bill Of Qualities, Bill Of Quantities, And Program Of Works Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates And Equipment Rentals. I. Summary Of Works J. All Design Output Shall Include The Following: Particulars Design Required Output Hard Copy Printed In Standard Size Paper 40 X 30 Printed And Hardbound Catalog For All Perspective Views, Architectural Finishes, Electrical Fixtures, Sanitary/plumbing Fixtures Utilizing Standard A4 Size Photo Paper Electronic Copy Electronic Copies In Standard Formats: - Designplansfile.pdf; - Designplanscadfile.dwg; - Design3dfile.skp/dwg/etc; - Powerpointpresentation.ppt; - 3d Animations (walkthrough.mp4/avi/mov/etc.) Design And Build Contractor Shall Compile All The Files And To Be Stored In 1tb External Drive Fourth And Final Session - The Design And Build Contractor Shall Submit The Completed Detailed Design Drawings Of The Entire Building, Within Sixty (60) Calendar Days From The Effectivity Of Notice To Proceed. C. Green Building 1. Design Development Shall Consider At Least Basic Requirements For Green Building Applied To Hospital Facilities In Building Component Systems Such As Architectural, Structural, Electrical, Mechanical, And Sanitary. D. 3d Animation And Walkthrough Presentations Designer Shall Prepare A 3d Walkthrough, That Is, Taking A Virtual Tour Of The Proposed Project/structure In Any Design Platform. It Shall Be Produced From Digital 3d Models That Have Been Visualized To A Photo-realistic Standard That Will Showcase All The Design Elements, Both Externally And Internally Of A Property Development And Its Spaces. Minimum Expected Output Shall Include But Not Limited To: - 3d Walkthrough Presentation That Will Show From The Main Entrance Of The Hospital Compound, Going Through The Site Where The Project Is To Be Located. From The Site, It Should Walk Through The Main Facade And Entrance Of The Ground Floor Of The Building Up To The Third Floor Showing All The Respective Floors, Its Lobbies, Hallways, Rooms And Other Support Facilities. - In Addition, The 3d Walkthrough Presentation Shall Include The Exterior Views / Facade Of The Building With Its Adjoining Structures. E. Pre-construction Pre-construction Meeting Shall Be Scheduled On The Next Day That The Completed Detailed Design Drawings Are Submitted. Key Stakeholders—including The Dedvmh, And The Design And Build Contractor (architects, Engineers, Consultants, And Contractor—must Attend). The Meeting Will Serve To:  Review And Confirm The Submitted Design Documents.  Ensure That The Designs Comply With The Project’s Specifications, Budget, And Schedule.  Address Any Necessary Adjustments Or Clarifications Before Construction Commences. After The Pre-construction Meeting, The Design And Build Contractor Shall Finalize And Submit The Following Documents For The Approval Of Dedvmh: 1. Duly Signed Construction Schedule And S-curve 2. Duly Signed Manpower Schedule 3. Duly Signed Construction Methods 4. Duly Signed Pert Cpm And Ghannt Chart Showing Per Item Of Works Of Individual Projects 5. Log Book This Submission Should Encompass All Architectural, Structural, And Mepfs Plans, Specifications, And Any Amendments From The Meeting. These Documents Will Form The Basis For Construction. Upon The Dedvmh’s Approval Of The Submitted Construction Documents, A Notice To Commence Will Be Issued. Construction Activities May Only Begin Following The Issuance Of This Notice. F. Construction As A Rule, Contract Implementation Guidelines For Procurement Of Infrastructure Projects Shall Comply With Annex “e” And Guidelines For The Implementation Of Contracts For Design And Build Infrastructure Projects Shall Comply With Annex “g” Of Irr, Ra 9184. The Following Provisions Shall Supplement These Procedures: 1. Scope Of Works: Supply Of Materials, Labor, Tools And Equipment Necessary To Complete The Execution Of Architectural, Structural And Electrical And Mechanical Works. Includes All Other Necessary Works That Complete For The Fully Operational Building But Limited To The Following Work Items; A) Site Works - Provision Of Temporary Perimeter Fence - Demolition Of Existing Building/structure, Includes Hauling Of Debris Within The Hospital Compound - All Materials, Debris, Etc. Identified As Garbage As Directed By Hospital Management Shall Be Disposed Off-site - Excavation And Grading Provide Necessary Soil Protection On Excavated Portion. - Soil Poisoning And Termite Control B) Foundation Works - Foundation Of The Entire Building Includes Column Footings, Wall Footings And Other Sub-structures As Specified In The Approved Plan. C) Concrete Works - From New Foundation; Includes Slabs, Beams And Girders D) Architectural Works I) Exterior Walls – All Exterior Wall At Ground Floor Ii) Interior Walls – All Interior Wall At Functional Floors Complete With Wall Finishes Iii) Ceiling Works – All Functional Floors As Determined By Procuring Entity Iv) Floor Finish – All Functional Floors As Determined By Procuring Entity V) Doors And Windows– All Exterior Doors And Windows As Per Plan And Specifications Vi) Doors And Windows – All Functional Areas As Determined By Procuring Entity Vii) Painting Works – All Exterior Walls; Interior Walls At Functional Areas Viii) Façade And Signage E) Electrical Works I) Roughing-ins – All Necessary Roughing-ins Including Riser Conduits Including Ii) Cable Tray Iii) Panel Boards And Breakers – Main Breaker; Panel Boards From Ground Floor To Third Floor Iv) Wires And Cables – All Wires And Cables At Functional Floors Includes Installation Of Main Feeder Lines Tap To Existing Power House Including Connections To All Panel Board And Breakers V) Electrical Fixtures And Devices – All Fixtures And Wiring Devices At Functional Areas. Provision Of Usb Ready Outlets To Every Rooms. Vi) Application Of Electrical Connections/permits Shall Be Shouldered By The Contractor F) Mechanical Works I) Installation Of Automatic Fire Protection System At Functional Areas Ii) Installation Air Condition Units At Functional Areas As Determined By Professional Mechanical Engineer G) Plumbing And Sanitary Works I) Installation Of Plumbing And Sanitary System At Functional Areas, Includes; - Water Supply Pipelines - Waste Water Pipelines - Plumbing Fixtures And Accessories - Necessary Riser Pipes - Fiber Glass Pressure Tank - Provision Of Water Softener I) Electronics / Auxiliary Works - At Functional Areas: Public Address / Voice Evacuation Systems (paging Systems), Cctv, And Or Integrated Information And Communication Systems, Installation Of Fire Detection And Alarm System (fdas) At Functional Floors J) Other Works - At Dietary: Lpg Pipelines 1. No Works Shall Commence Unless The Contractor Has Submitted The Prescribed Documentary Requirements And The Dedvmh Has Given Written Approval. Work Execution Shall Be In Accordance With Reviewed And Approved Documents. The Contractor Shall Process The Approval Of Permit To Construct (ptc) Form Doh – Central Visayas Regional Office, Cebu City. In Addition To, The Contractor Shall Process The All-necessary Permits (i.e., Building Permit, Occupancy Permit And All Prerequisite Permits) Chargeable Against The Project. 2. The Contractor Shall Be Responsible For Obtaining All Necessary Information As To Risks, Contingencies And Other Circumstances Which May Affect The Works And Shall Prepare And Submit All Necessary Documents Specified By The Concerned Building Officials To Meet All Regulatory Approvals As Specified In The Contract Documents. 3. Any Errors, Omissions, Inconsistencies, Inadequacies Or Failure Submitted By The Contractor That Do Not Comply With The Requirements Shall Be Rectified, Resubmitted And Reviewed At The Contractor’s Cost. If The Contractor Wishes To Modify And Design Or Document Which Has Been Previously Submitted, Reviewed And Approved, The Contractor Shall Notify The Hospital Management And The Procuring Entity Within A Reasonable Period Of Time And Shall Shoulder The Cost Of Such Changes. 4. As A Rule, Changes In Design And Construction Requirements Shall Be Limited Only To Those That Have Not Been Anticipated In The Contract Documents Prior To Contract Signing And Approval. The Following Guidelines Shall Govern Approval For Change Or Variation Orders: A. Change Orders Resulting From Design Errors, Omissions Or Non-conformance With The Performance Specifications And Parameters And The Contract Documents By The Contractor Shall Be Implemented By The Contractor At No Additional Cost To The Procuring Entity. B. Provided That The Contractor Suffers Delay And/or Incurs Costs Due To Changes Or Errors In The Dedvmh Performance Specifications And Parameters, The Contractor Shall Be Entitled To Either One Of The Following: 1. An Extension Of Time For Any Such Delays Under Section 10 Of Annex “e” Of Irr (ra 9184); Or 2. Payment For Such Costs As Specified In The Contract Documents, Provided, That The Cumulative Amount Of The Variation Order Does Not Exceed Ten Percent (10%) Of The Original Project Cost. C. The Contract Documents Shall Include The Manner And Schedule Of Payment Specifying The Estimated Contract Amount And Installments In Which The Contract Will Be Paid. D. The Contractor Shall Be Entitled To Advance Payment Subject To The Provisions Of Section 4 Of Annex “e”, Irr (ra 9184). B. The Dedvmh Shall Define The Quality Control Procedures For The Design And Construction In Accordance With The Doh Guidelines And Shall Issue The Proper Certificates Of Acceptance For Sections Of The Works Or Whole Of The Works As Provided For In The Contract Documents. C. The Contractor Shall Provide All Necessary Equipment, Personnel, Instruments, Documents And Others To Carry Out Specified Tests. D. This Design And Build Projects Shall Have A Minimum Defects Liability Period Of One (1) Year After Contract Completion Or As Provided For In The Contract Documents. This Is Without Prejudice To The Liabilities Imposed Upon The Engineer/architect Who Drew Up The Plans And Specification For Building Sanctioned Under Section 1723 Of The New Civil Code Of The Philippines. E. The Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Of 15 Years For Permanent Structures/buildings As Specified In Section 62.2.3.2 Of The Irr (ra 9184) V. Implementation Arrangement A. Reporting Protocol Contact Person I. Nelson A. Elle, Md, Dtmph, Mscih Office Of The Medical Center Chief Ii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Ii. Joan V. Kadusale, Cpa Supervising Administrative Officer Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Iii. Leomel R. Labitad, Ce Engineer Iii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Iv. Allana Jane C. Dacoylo, Uap Architect Ii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Vi. Elegibility Requirements A. Basic 1. The Eligibility Requirements For Design And Build Scheme Shall Comply With The Applicable Provisions Of Sections 23-24 Of Irr Of Ra 9184. 2. A Modified Set Of Requirements Integrating Eligibility Documents And Criteria For Infrastructure Project And Consulting Services Shall Be Adopted In Accordance With Annex G - Guidelines For The Procurement And Implementation Of Contracts For Design And Build Infrastructure Projects Of Irr Of Ra 9184. 3. Pcab Classification Under “general Building”; License Category B “medium A” 4. Contractor Must Have Similar Project In The Amount At Least Fifty Percent (50%) Of The Abc Within The Past Five (5) Years. 5. Similar Projects With The Following But Not Limited To:  Low-rise Hospital Facility Project, Must Have Ongoing Or Completed Project At Least 2-storey Building.  Supply And Installation Of Hvac System. B. Specialized 1. For Pre-design And Design Phase Of The Contract, The Bidder Shall Comply The Following Professionals To Be Assigned: I. Project Coordinator • Licensed Architect Or Engineer With At Least 10 Years’ Experience In Hospital-related Project Management. • Superb Oral And Written Communication Skills, Organization Skills And Excellent Administrative Abilities. Ii. Architect • The Architect Must Be A Registered And Licensed Architects (rla), With An Updated Professional Identification Card And Must Be A Member In Good Standing Of The Integrated And Accredited Professional Organization Of Architects (iapoa). • Should Have At Least 5 Years’ Experience In Hospital-related Project. Iii. Structural Engineer • Licensed Structural Engineer With At Least 5 Years’ Experience In Hospital-related Project Management. • Must Be A Member Of Accredited Structural Engineer Associations. Iv. Mechanical Engineer • Licensed Professional Mechanical Engineer With At Least 5 Years’ Experience In Hospital-related Project. V. Electrical Engineer • Licensed Professional Electrical Engineer With At Least 5 Years’ Experience In Hospital-related Project. Vi. Sanitary Engineer • Licensed Sanitary Engineer With At Least 5 Years’ Experience In Hospital-related Project. Vii. Cad Operator (at Least One For Architecture And One For Each Engineering Specialty) • At Least Bachelor’s Degree In Architecture, Engineering, And/or Industrial Technology Major In Drafting • Proficient In Autocad Software Viii. Administrative Support Staff 2. For The Construction Phase Of The Contract, The Contractor Shall Assign Technical Personnel With The Following Qualification: I. Project Manager • Licensed Architect Or Engineer With At Least 10 Years’ Experience In Medium Rise Hospital-related Project • Superb Oral And Written Communication Skills, Organization Skills And Excellent Administrative Abilities. Ii. Project Engineer (civil) • Licensed Civil Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project Iii. Project Engineer (mechanical) • Registered Mechanical Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project Iv. Project Engineer (electrical) • Registered Electrical Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project V. Cad Operator (at Least One For Architecture And One For Each Engineering Specialty) • At Least Bachelor’s Degree In Architecture, Engineering, And/or Industrial Technology Major In Drafting • Proficient In Autocad Software Vi. General Foreman (all Discipline) • With At Least 5 Years’ Experience As General Foreman In Medium Rise Project Vii. Skilled Workers (all Discipline) • With At Least 3 Years’ Experience In Medium Rise Project Viii. Administrative Support Staff Vii. Approved Budget Cost Project Description Approved Budget Cost Design Of Dedvmh Nutrition And Dietetics Service Facilities 5%-6% Of Abc Construction Of Dedvmh Nutrition And Dietetics Service Facilities 94%-95% Of Abc Total Abc Php 15,000,000.00 The Approved Budget For The Design-build Contract Is Fifteen Million Pesos (php 15,000,000.00) Which Is Identified As The Design And Build Of Don Emilio Del Valle Memorial Hospital Nutrition And Dietetics Service Facilities. Detailed Architectural And Engineering Design Services Shall Not Seven Percent (7%) Of The Approved Budget Cost (as Per Prboa Resolution No. 6 Series Of 2016 - Architect’s Guidelines For Standards Of Professional Practice Compliances On The Methods Of Compensation And Schedule Of Fees, Pursuant To Republic Act No.9266, Published In The Official Gazette, September 19, 2016 Issue) Of The Entire Building Inclusive Of Taxes And Duties. Proposals Exceeding The Approved Budget Shall Be Automatically Rejected. Viii. Estimated Duration Of Engagement The Duration Of The Contract Is Three Hundred Sixty (240) Calendar Days From The Design Phase Up To The Completion Of The Project From The Date Of Effectivity: I. Pre-design And Design Phase - 60 Calendar Days Ii. Construction Phase - 180 Calendar Days Ix. Minimum Requirements For Construction Safety And Health A. General Requirements No Contractor Or Subcontractor Shall Require Any Employee To Work In Surroundings Or Under Working Conditions That Are Unsanitary, Hazardous, Or Dangerous To His Health Or Safety. In Order To Meet This General Requirement, The Contractor Must: 1. Initiate And Maintain Programs (written Or Otherwise) To Comply With This General Requirement. 2. Provide Frequent And Regular Inspections Of The Job Sites By Competent Persons.  Competent Person Means One Who Is Capable Of Identifying Existing And Predictable Hazards In The Surroundings Or Working Conditions Which Are Unsanitary, Hazardous, Or Dangerous To Employees, And Who Has Authorization To Prompt Corrective Measures To Eliminate Them. 3. Prohibit The Use Of Any Machinery, Tool, Material, Or Equipment That Is Not In Compliance With Applicable Requirements. 4. Permit Only Those Employees Adequately Trained To Operate Machinery Or Equipment. 5. Provide Training For All Employees In:  Recognition And Avoidance Of Unsafe Conditions  Workplace Safety And Health Requirements  Applicable Hazards, Safe Handling, And Personal Protective Equipment Necessary For Handling Poisons, Caustics, Flammables, And Other Harmful Substances Relevant To Their Job Duties.  Specific Hazards And Procedures For Entering Confined Spaces If Applicable 6. Provide Provisions For Medical Care And First Aid. 7. Develop An Effective Fire Protection And Prevention Plan. 8. Ensure Appropriate Housekeeping Measures Including Clear Walkways And Removal Of Combustible Scrap And Debris. 9. Require The Wearing Of Appropriate Personal Protective Equipment Such As Hard Hats, Safety Glasses, Steel Toe Shoes, Or Other Appropriate Protective Equipment In All Operations Where There Is An Exposure To Hazardous Conditions. 10. Develop An Emergency Action Plan Covering Designated Actions Employers And Employees Must Take To Ensure Employees Safety From Fire And Other Emergency.  Plan Must Be In Writing For Employers With Greater Than 10 Employees  All Employees Must Be Trained Upon Initial Assignment On The Parts Of The Plan The Employee Needs To Know In The Event Of An Emergency. 11. Provide Access To Hand Washing Facilities, Toilets, And An Adequate Supply Of Drinking Water. 12. Provide Safety And Health Signs That Are Clearly Visible To Construction Workers And Public. 13. Conduct Regular Safety Meetings. Source: Colorado State University Occupational Health And Safety Section Department Of Environmental Health Fort Collins, Colorado X. Design Technical Specifications And Requirements The Bidder Shall Submit The Following Design Deliverables In Accordance With The Design Specifications, Parameters And Drawing Checklist But Not Limited To The Following: Activity Reports And Documents Required 1. Pre-design Phase 1.1 Master Site Development Plans And Conceptual 3d Design Five (5) Sets Duly Signed And Seal Master Site Development Plans In Hard Copy (at Least 20 X 30 Paper Size In Desired Minimum Scale) And Softcopy (editable File.dwg And 3d Model.skp/cad/etc) Powerpoint Presentation And/or Walkthrough Presentation 2. Design Phase 2.1 Detailed Architecture And Engineering Designs/plans Including Applicable And/or Approved Revisions To The Satisfaction Of The Procuring Entity Five (5) Sets Duly Signed And Seal Detailed Architecture And Engineering Plans/drawing In Hard Copy (at Least 20 X 30 Paper Size In Desired Minimum Scale) And Softcopy (editable File.dwg And 3d Model.skp/cad/etc) (refer To Design Parameters And Drawing Checklists) 2.2 Construction Technical Specifications Five (5) Sets Duly Signed And Seal Construction Technical Specifications In Hard Bound Xi. Space Requirements General Floors:  Ceiling Height Should Be At Least Three Meters Clear Height For 2nd Floor And Up. Ground Floor Lobby Must Be Of Higher Ceiling.  Provision Of Utility Room Enough To House Trolley And Dirty Utilities With Floor Drain  All Floors Shall Have Direct Access To Ramp  Both Stairs Are For Service And Emergency Use  External Window At Second Floor And Up Shall Be Of Awning Type.  Provision Of Electrical Room  Ramp For Wheelchair Access (with A Clear Width Of At Least 1.22 M. 4 Ft.).  Minimum Of Two (2) Exits, Remote From Each Other, For Each Floor Of The Building.  Exits Restricted To The Following Types: Door Leading Directly Outside The Building, Interior Stair, Ramp And Exterior Stair.  Exits Terminate Directly At Open Space To The Outside Of The Building. Ground Floor – Nutrition And Dietetics Service Facilities • Hospital Staff Dining Room - This Area Is Where Hospital Staff Diners Take Their Meals. - Planning Relationships: A. Close To Serving And Food Assembly Area B. Close To Dishwashing Area - Lighting System: C. For General Illumination, Provide At Least 250 Lux. - Power System: D. Provide At Least Four (4) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Auxiliary System: E. Provide And Install The Following Auxiliary System: • Communication System  Telephone System – Provide At Least One (1) Unit Telephone Outlet.  Local Area Network System – Provide At Least One (1) Unit Data Outlet.  Public Address Paging System – Provide At Least One (1) Unit Paging System - Fire Alarm System: F. Provide At Least Two (2) Units Smoke Detector. - Air Conditioning System: G. Provide Air Conditioning System. • Cooking And Baking Area - This Area Is Dedicated For Cooking And Baking Food, With High Pressure Gas Piping System. Equipment And Accessory Checklist: • Hood, Exhaust • Drainage Key Furniture/fixture Checklist: • Counter, 900mm High • Stainless Steel Grade 304 Sink, Single Compartment With Drainboard; 350-400mm Deep • Stainless Steel Grade 304 Sink, Double Compartment With Drainboard; 350-400mm Deep • Shelves, Overhead • Drain, Trench Grating • Concealed Floor Drain - Planning Relationships: A. Adjacent To Staff Dining Room B. Close To Dietitian’s Office - Lighting System: C. For General Illumination, Provide At Least 500 Lux. - Power System: D. Provide At Least Thirteen (13) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least Two (2) Units Ground Fault Circuit Interrupter. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light And Two (2) Units For Exhaust Fan With Specifications Of 15a, 2p, And 240v, Single. - Standby/emergency System: E. Provide And Install Adequate Life Safety And Critical Emergency Branch Circuit For Lighting And Utilization Equipment Connected To The Alternate Power Source. - Auxiliary System: F. Provide And Install The Following Auxiliary System: • Communication System  Public Address Paging System – Provide At Least One (1) Unit Paging System - Fire Alarm System: G. Provide At Least Three (3) Units Smoke Detector. - Gas Piping System: H. Provide High Pressure Gas Piping System. - Equipment And Accessories: I. Provide Hood, Exhaust J. Provide Range With Oven K. Provide Range With Broiler - Air Conditioning System: L. Provide Air Conditioning System. • Food Preparation Area W/ Special Diet Preparation Area - This Area Is Where Food Service Workers Prepare Food Vegetables, Slice And Cut Meat And Fish, Segregate Food, Set-up And Assemble Cooked Food, Place Food Trays And Containers On Food Conveyors To Be Taken To Wards. This Is Also Where Dietitian Puts Tags On Prepared Trays For Pay Patients. This Also Includes Space For Special Diet Preparation Area Key Furniture/fixture Checklist: • Counter, Work; Stainless Steel Grade 304 • Stainless Steel Grade 304 Sink, Single Compartment, With Drainboard; 350-400mm Deep • Stainless Steel Grade 304 Sink, Double Compartment, With Drainboard; 350-400mm Deep • Counter, Food Preparation; Stainless Steel Grade 304 • Counter, Tray Set-up; Stainless Steel Grade 304 • Shelves, Overhead • Drain, Trench Grating; Stainless Steel - Planning Relationships: A. Adjacent To Staff Dining B. Close To Dietitian’s Office - Lighting System: C. For General Illumination, Provide At Least 500 Lux. - Power System: D. Provide At Least Seven (7) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Auxiliary System: E. Provide And Install The Following Auxiliary System: • Communication System  Telephone System – Provide At Least One (1) Unit Telephone Outlet.  Local Area Network System – Provide At Least One (1) Unit Data Outlet.  Public Address Paging System – Provide At Least One (1) Unit Paging System - Fire Alarm System: F. Provide At Least One (1) Unit Smoke Detector. - Air Conditioning System: G. Provide Air Conditioning System. • Blenderized And Tube Feeding Area - This Area Is Where Preparation Of Food And Equipment Needed For Blenderized And Tube Feeding. Key Furniture/fixture Checklist: • Counter, Work; Stainless Steel Grade 304, With Cabinets Above And Shelves Below • Stainless Steel Grade 304 Sink, Single Compartment, With Drainboard; 350-400mm Deep • Stool, Adjustable Height • Concealed Floor Drain - Planning Relationships: A. Adjacent To Special Diet Preparation Area B. Close To Dietitian/nutritionist’s Office - Lighting System: C. For General Illumination, Provide At Least 250 Lux. - Power System: D. Provide At Least Three (3) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least Three (3) Units Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: E. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Air Conditioning System: F. Provide Air Conditioning System. • Serving And Food Assembly Area - This Area Is Where Food Service Workers Set Up And Assemble Cooked Food, And Place Food Trays And Containers On Food Conveyors To Be Taken To Wards. Key Furniture/fixture Checklist: • Counter, Work; Stainless Steel Grade 304 • Stainless Steel Grade 304 Sink, Single Compartment, With Drainboard; 350-400mm Deep • Stool, Adjustable Height • Concealed Floor Drain - Planning Relationships: A. Adjacent To Staff Dining Room B. Close To Dietitian/nutritionist’s Office - Lighting System: C. For General Illumination, Provide At Least 500 Lux. - Power System: D. Provide At Least One (1) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: E. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Air Conditioning System: F. Provide Air Conditioning System. • Food Conveyor Parking - This Space Is For Transit Station For Food Tray Truck/conveyor. - Planning Relationships: A. Close To Dishwashing Area B. Adjacent To Food Assembly/tray Set-up Area - Lighting System: C. For General Illumination, Provide At Least 250 Lux. - Power System: D. Provide At Least One (1) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: E. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Ventilation System: F. Provide One (1) Unit Orbit Fan. • Cold Storage - This Area Is For Storage Of Poultry, Meat And Dairy Products Procured, Food That Easily Spoils (egg, Vegetables, Fruits), And Of Leftover Cooked Food That Are Still Edible Equipment And Accessory Checklist: • Refrigerator, 20 Cu. Ft. • Freezer, 20 Cu. Ft. • Chiller, 20 Cu. Ft., Reach-in Key Furniture/fixture Checklist: • Table; Stainless Steel Grade 304; 750 X 1200mm • Concealed Floor Drain - Planning Relationships: A. Adjacent To Dry Storage Room B. Close To Receiving Area C. Adjacent To Dietitian’s Office - Lighting System: D. For General Illumination, Provide At Least 150 Lux. - Power System: E. Provide At Least Ten (10) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: F. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Ventilation System: G. Provide One (1) Unit Exhaust Fan. • Dry Storage - This Area Is For Storage Of Food Procured, Food Intended For The Next Two Meals, Of Excess Supplies For Future Use, And Of Food That Does Not Spoil Easily. Key Furniture/fixture Checklist: • Counter, Work • Shelves, 400 Mm Deep • Cabinet, Lockable - Planning Relationships: A. Adjacent To Cold Storage Room - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Three (3) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Parallel Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Ventilation System: E. Provide One (1) Unit Orbit Fan. • Storage For Utensils/silverware - This Area Is For Storage Of Kitchen Utensils And Silverware Key Furniture/fixture Checklist: • Shelves, Open, 600mm Deep - Planning Relationships: A. Close To Dietitian’s Office - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Two (2) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Ventilation System: D. Provide One (1) Unit Orbit Fan. • Delivery Receiving Area - This Area With Exhaust Fan Is Dedicated For Dietitian On Duty And Auditor Witness Weighing Of Food Delivered By Supplier, And Where Auditor Inspects And Checks Quality Of Food Items Purchased From The Market And Those Delivered By The Supplier. Key Furniture/fixture Checklist: • Counter, Stainless Steel • Sink, Single Compartment With Drainboard; 350-400mm Deep • Counter, Tiled • Shelves, Open • Concealed Floor Drain - Planning Relationships: A. Adjacent To Dietitian’s Office B. Close To Cold And Dry Storage Rooms - Lighting System: C. For General Illumination, Provide At Least 150 Lux. - Power System: D. Provide At Least One (1) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Ventilation System: E. Provide At Least One (1) Unit Orbit Fan. • Dishwashing And Pots Washing Area - This Area Is For Washing Of Pots, Pans, Trays, Dishes And Other Kitchen Utensils, And Where Food Service Workers Perform Other Clean-up Activities. Equipment And Accessory Checklist: • Dishwashing Machine, Floor Unit • Wash Container, 380 Mm Dia. • Waste Bin With Black Lining Key Furniture/fixture Checklist: • Counter, Stainless Steel Grade 304 • Stainless Steel Sink Grade 304, Double Compartment With Drainboard • Grease Trap • Counter, With Upturned Edge • Shelves, Open • Table, Feeder, Stainless Steel 700 X 1200mm • Table, Work, Stainless Steel 700 X 2400mm • Concealed Floor Drain - Planning Relationships: A. Close To Food Preparation Area B. Close To Dietitian’s Office - Lighting System: C. For General Illumination, Provide At Least 250 Lux. - Power System: D. Provide At Least Six (6) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Parallel Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: E. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Ventilation System: F. Provide At Least Two (2) Units Orbit Fan. • Waste Holding Area - This Area Is For Food Service Workers Sort Garbage Accordingly, Pack Garbage And/or Place Sorted Garbage Into Proper Bins/container, And Where Garbage Generated For A Day Or Two Is Temporarily Stationed Prior To Being Collected For Transfer To The Waste Management Service. Equipment And Accessory Checklist: • Garbage Bin Containers • Faucet With Hose Bibb Key Furniture/fixture Checklist: • Floor Drain - Planning Relationships: A. Located In The Perimeter Of The Dietetics Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least One (1) Unit Ground Fault Circuit Interrupter (gfci). Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector (ionization Type). - Ventilation System: E. Provide At Least One (1) Unit Orbit Fan. • Dietitian’s Office / Staff Office - This Room Area Is Where The Chief Dietitian Calls Meetings With Staff For The Preparation Of Monthly Menu, Where Chief Dietitian And Staffs Reads, Writes And Uses Telephone In His Work Station, Dietitian And Staff Receive Visitors, Dietitian And Staff Store, File And Retrieves Records. - Planning Relationships: A. Located In The Kitchen Where It Shall Give The Dietitian Extensive/elevated View Of Work Areas And Control Over Possible Pilferage Of Dietary Supplies And Equipment. - Lighting System: B. For General Illumination, Provide At Least 500 Lux. - Power System: C. Provide At Least Twelve (12) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Provide At Least One (1) Unit Ground Fault Circuit Interrupter Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Auxiliary System: D. Provide And Install The Following Auxiliary System: • Communication System  Telephone System – Provide At Least One (1) Unit Telephone Outlet.  Local Area Network System – Provide At Least One (1) Unit Data Outlet.  Public Address Paging System – Provide At Least One (1) Unit Paging System - Fire Alarm System: E. Provide At Least Two (2) Units Smoke Detector (ionization Type). - Air Conditioning System: F. Provide Air Conditioning System • Staff’s Dressing, Lockers, Toilet And Bath - This Room/space Is Equipped With Secure Lockers, Private Dressing Rooms, And Accessible Toilets And Showers To Support Hygiene And Comfort For Male And Female Staff. This Space, With Its Own Separate Staff Entrance, Allows For Efficient Staff Flow. - Planning Relationships: A. Close To Dishwashing Area B. Adjacent To Food Assembly/tray Set-up Area - Lighting System: C. For General Illumination, Provide At Least 150 Lux. - Power System: D. Provide At Least One (1) Unit Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. • Storage/closet - This Area Is For Storing Cleaning Materials Such As Detergents, Disinfectants, Brushes, Mops, And Other Sanitation Tools Used In Dietary Operations. - Planning Relationships: A. Located Within Patients Dishwashing Area. - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. • Lpg Storage Area - This Area Is Well-ventilated Space Designed For The Safe Storage Of Lpg Tanks Used In Kitchen Operations. The Area Will Be Located Away From Open Flames, Heat Sources, And High-traffic Zones To Ensure Safety. It Will Feature Non-combustible Walls, A Fire Extinguisher, Proper Signage, And Adequate Lighting. The Space Will Also Include Provisions For Leak Detection, An Accessible Emergency Shut-off Valve, And Ground-level Storage To Prevent Accidental Tipping Of Lpg Tanks. - Lighting System: A. For General Illumination, Provide At Least 250 Lux. - Power System: B. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. • All Gender / Pwd Toilet & Bath - This Area Is Designed To Be Inclusive, Complying With The Updates To The Amended Irr Of Bp 344. It Ensures Accessibility For All Genders And Persons With Disabilities (pwd), Featuring Wide Doors, Support Bars, Urinal And Spacious Layout To Meet The Latest Standards For Accessibility And Comfort. - Planning Relationships: A. Accessible To All Staffs. B. Minimum Of One (1) Toilet On Each Floor Accessible To Disabled. - Lighting System: C. For General Illumination, Provide At Least 150 Lux. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. • Electrical Room - Located On The Ground Floor In The Staff Hallway, It Is Strategically Placed To Maintain Separation And Safety While Ensuring Easy Access For Maintenance And Operation. - Lighting System: A. For General Illumination, Provide At Least 250 Lux. - Fire Alarm System: B. Provide At Least One (1) Unit Smoke Detector. - Power System: C. Provide At Least One (1) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. • Common Toilet With Sink (female And Male Toilet Cubicle) - This Area, Featuring Separate Female And Male Toilet Cubicles, Will Serve Both The Dietitians/staff Office And The Hospital Staff Dining Room. It Will Be Designed For Accessibility And Include Standard Fixtures, Such As Sinks, Mirrors, And Hand Dryers Or Paper Towel Dispensers. The Space Will Prioritize Hygiene And Ease Of Maintenance With Durable, Easy-to-clean Surfaces, Adequate Lighting, And Ventilation. - Planning Relationships: A. In Between Dietitians/staff Office And Hospital Staff Dining - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Fire Alarm System: C. Provide At Least One (1) Unit Smoke Detector. Xiv. Design Parameters (architectural) A. Codes And Standards The Architectural Works Shall Be In Accordance With The Following Laws, Codes And Standards.  Laws And Codes: 1. National Building Code Of The Philippines And Its Latest And Amended Irr 2. Ra 9266 Or Architecture Law And Its Latest And Amended Irr 3. Ra 4226 Or Hospital Licensing Act And Its Latest And Amended Irr 4. Bp 344 Or Accessibility Law And Its Latest And Amended Irr 5. Ao 35, S. 1994 Or Ao Pertaining To The Control Of Radiation Hazards 6. Ra 9514 Fire Code Of The Philippines 7. Existing Local Codes And Ordinances. 8. And Other Laws That Applies To The Projects  Standards: 1. Bureau Of Product Standards (bps) 2 Underwriters Laboratory (ul) 2. Doh Technical Guidelines For Hospital & Health Facilities Planning And Design – Level 3 B. General Drawing Guidelines 1. General  All Drawings Shall Be Computer-drafted. Drawings Shall Be Submitted Both In Printed And Electronic Copies.  Keep The Same Orientation For All Plans. The North Orientation Shall Be Indicated In All Architectural Floor Plans. The Orientation Of The Architectural Plans Shall Be Consistent With All The Engineering Plans.  Existing Buildings And New Works Shall Be Clearly Indicated And Labeled In The Site Plans.  Detailed Plans Shall Have A Scale Not Smaller Than 1:50 Meters.  Spot Detailed Plans, Elevations, And Sections Shall Have A Scale Not Smaller Than 1:10 Meters.  Avoid Notes Such As ‘see Architectural Detail’ Or ‘see Structural’. Always Refer With A Callout To The Specific Detail Drawing And Sheet Number. 2. Site Plans  The Site Plans Shall Have A Scale Not Smaller Than 1:500 Meters. 3. Floor Plans  All Plans Shall Be 1:100 Meters. The Same Scale Shall Be Used For The Rest Of The Architectural, Structural, Sanitary, Plumbing, Electrical And Mechanical Plans, Except For Each Trade’s Site Plan, Detailed Plans And Spot Details.  Elevation Callouts Shall Be Indicated On The Floor Plans And Shall Be Consistent With The Elevation Drawing.  Section Line Callouts On The Floor Plans Shall Be Consistent With The Section Drawing.  Floor Plans Shall Be Indicated With Boxed Room Callout Numbers, Including The Callout For Floor Finishes And Wall Finishes.  Floor Elevations Shall Be Indicated In The Floor Plans. This Shall Be In Reference To The Natural Grade Line Or The Established Finished Floor Lines Of The Adjoining Existing Buildings.  The Location Of Mechanical Equipment, E.g. Air Conditioning Shall Be Indicated In The Floor Plans. This Shall Be Consistent With The Mechanical And Electrical Plans.  Door Callouts Shall Be Circles With The Proper Numbering, E.g. D-01.  Window Callouts Shall Be Hexagons With The Proper Numbering, E.g. W-01. 4. Elevations And Sections  Finish Floor Lines And Top Of Truss Lines Shall Be Consistent In All The Elevations, Sections And Structural Plans And Details. 5. Reflected Ceiling Plans  Reflected Ceiling Plans Shall Be Indicated With Boxed Room Callout Numbers, Including The Callout For Ceiling Finishes And Lighting Fixtures.  Ceiling Height Relative And In Reference To The Finish Floor Line Shall Be Indicated In The Reflected Ceiling Plans In Each Room With Boxed Dimensions. This Is To Ensure That The Ceiling Heights Of All Rooms Are Established Whether Or Not Reflected In The Sections.  The Description And Location Of The Fixtures, E.g. Lighting, Smoke Detectors, Air Condition Vents, Exhaust Fans, In The Reflected Ceiling Plans Shall Be Consistent With The Electrical And Mechanical Plans. 6. Roof Plans  Location Of All Downspouts Shall Be Indicated In The Roof Plans. 7. Doors And Windows  Door And Window Schedules Shall Indicate The Type Of Door Or Window, The Number Of Sets, The Location/s Of The Door Or Window, The Materials And Accessories Included And Other Special Specifications, E.g. Color Or Finish. All Windows Above Ground Floor Should Be Of Awning With An 45 Deg. Opening Angle. 8. Details  Provide A Minimum Of One (1) Bay Section Of A Scale Not Smaller Than 1:50 Meters For Each Major Building Preferably Cut Along The Area With Special Construction Design.  Provide Spot Detail Plans, Elevations And Sections Of A Scale Not Smaller Than 1:10 Meters For Special Designs With Aesthetic Treatment And Ornamentation.  Provide Detailed Plans Of A Scale Not Smaller Than 1:50 For All Areas Needing Tile Pattern, E.g. Lobby, Corridor, Entrance Walk, Showing The Position And Pattern Of Tiles.  Centerline Location Of Plumbing Fixtures Shall Be Indicated In Detailed Plans With Lines Of Reference And Its Corresponding Dimensions. This Is To Indicate The Exact Locations Of The Plumbing/sanitary Roughing-ins. C. Site Works 1. The Master Site Development Plan Of The Hospital Shall Include The Following:  Contour And Survey Of The Lot, Including Bearing And Distance Of The Property Line  Road Network And Curbs And Sidewalks  Parking Spaces  Reference Location Of Existing Trees  Reference Location And Footprint Of Existing Buildings, With The Corresponding Building Names And Dimensions, Including Distances Between Adjacent Buildings, And Distances Between Buildings And The Nearest Property Line  Reference Location Of Utilities, E.g. Water Reservoirs, Septic Tank, Wastewater Treatment Plant, Powerhouse, Transformers, Waste Storage Area, Security Outposts 2. The Layout Of The Buildings On The Site Shall Be Zoned According To The Service It Provides:  The Outer Zone Shall Include All Front-line Services, E.g. Emergency, Out-patient, X-ray, Laboratory And Other Ancillary Departments.  The Inner Zone Shall Include The Wards.  The Deep Zone Shall Include Services Like The Operating Room, Delivery Room, Nursery, Intensive Care Unit And Other Sensitive Hospital Services.  The Service Zone Shall Include Non-medical Services But Are Essential To Hospital Operations, E.g. Staff Lounge And Lockers.  There Shall Be A Separate Road Network And Entry/exit For The Public And The Service Vehicles, E.g. Ambulance, Waste Collection Vans, Delivery Trucks.  In Limited Lot Areas, Buildings Should At Least Be Spaced Four (4) Meters Apart To Allow Natural Light And Ventilation.  Covered Walkways Shall Be Provided For Access And Connection To All The Buildings.  Ramps Shall Be Provided In All Main Entrances Of The Buildings And Other Access Openings To Walkways Leading To Other Buildings. D. Building Architectural Works 1. Floor Plans  The Structural, Sanitary, Plumbing, Electrical And Mechanical Designs Are Required To Refer To The Architectural Plans And Specifications In Case Of Discrepancies. If An Engineering Design Will Have Any Possible Conflict Or Interference On The Architectural Design, The Latter May Be Adjusted Provided That The Aesthetic Value Will Not Be Compromised.  The Architectural And Engineering Plans Shall Be Consistent All Throughout In Terms Of Dimensions And Locations Of Columns, Beams, Walls, Roof Line, Conduits, Ducts, Pipes, And Fixtures, Among Others. Column And Beam Grid Lines Shall Also Be Consistent In All The Architectural And Engineering Plans.  Verify And Coordinate Floor Plans With The Mechanical, Electrical And Sanitary Design With Regard To The Requirements For Mechanical Rooms, Ahu Rooms, Electrical Rooms, Pipe Chase, And Other Engineering Requirements.  Public Toilets Shall Have Provisions And Fixtures For Persons With Disability As Required By Bp 344. If Enough Space Allows, Toilets Specially Made And Designated For Persons With Disability Is Preferable. 2. Walls  Exterior Walls Shall Be 200mm. Thick, While Interior Walls Shall Be 150mm. Thick. This Is Indicative Of The Finished Wall Thickness Including The Plastering And Tile Works.  Used Soundproofed Wall Materials For Areas With Indicated “soundproofed”. Walls With An Stc Rating Of At Least 45-50 Is Recommended. In Areas Where High Confidentiality Or Privacy Is Required (e.g., Patient Rooms, Doctor’s Offices Near Noisy Zones), Consider An Stc Rating Of 55-60.  Double Layer Of Drywall: Use Two Layers Of Drywall On Either Side Of A Metal Or Wood Stud Frame For Enhanced Soundproofing.  Acoustic Insulation: Use High-density Insulation Like Mineral Wool Or Acoustic Fiberglass In Wall Cavities To Absorb Sound.  Higher Mass: Increase The Wall's Mass With Materials Like Masonry Or High-density Concrete, Which Can Significantly Reduce Sound Transmission.  Toilet Wall Tiles Shall Be 300mm. X 300mm. For Areas Of Six (6) Square Meters Or Below. Toilet Wall Tiles Shall Be 300mm. X 600mm. For Areas Above Six (6) Square Meters.  Layout And Work On Wall And Floor Tiles Must Be Aligned, Plumb, Level, And Square.  All Edges, Corners And Intersections Of Toilet Tiles, Including The Top-most Tile Not Reaching The Ceiling Shall Be Provided With Polyvinyl Chloride Tile Trims.  Tile Color And Design Shall Be Approved First Before Installation. 3. Floors  If Floor Tiles In Two Adjacent Rooms With Different Material, Color Or Design Meet At The Door Opening, The Cut Shall Be Located Middle Of The Door Thickness When In A Closed Position. Provide Details In The Floor Pattern Design.  Floors At The Openings Of Toilets For Persons With Disability Shall Be Sloping. Indicate In The Plans And Sections.  The Size Of The Toilet Floor Tiles Shall Be 300mm. X 300mm. For Areas Of Six (6) Square Meters Or Below. Toilet Floor Tiles Shall Be 300mm. X 600mm. For Areas Above Six (6) Square Meters. Indicate The Tile Pattern.  The Size Of The Pantry/lounge Floor Tiles Shall Be 600mm. X 600mm. Indicate The Tile Pattern.  The Size Of The Floor Tiles Of The Offices And Wards Shall Be 600mm. X 600mm, Or Bigger Depending On The Proportion To The Size Of The Room. Indicate The Tile Pattern.  The Size Of The Floor Tiles Of The Lobby And Corridor Shall Not Be Less Than 400mm. X 400mm. The Tile Size Of 600mm. X 600mm. Is Recommended For Bigger Areas. Indicate The Tile Pattern.  Layout And Work On Wall And Floor Tiles Must Be Aligned, Plumb, Level, And Square.  All Edges, Corners And Intersections Of Toilet Tiles, Shall Be Provided With Polyvinyl Chloride Tile Trims.  Tile Color And Design Shall Be Approved First Before Installation. 4. Ceiling Works  Ceiling Height For Areas With Special Aesthetic Treatment, E.g. Lobby, Major Conference Room, Auditorium, Executive Office, Shall Be Proportional To The Area Or Room Or As Required By The Designer. However, This Shall Not Be Lower Than 2700mm. Provide Details.  If Acoustic Boards On Aluminum T-runners Would Be Used For The Ceiling, Layout Should Be On Center And Avoiding Cut Pieces. If The Remaining Perimeter Of The Ceiling Is Less Than 600mm. Wide, It Shall Be Designed Complimentary With Fiber Cement Boards On Light Gauge Metal Furring. Likewise With Acoustic Boards In Big Areas, E.g. Offices, And Wards, Shall Be Designed In A Way To Break The Redundancy. Provide Details.  Soffit Of Exterior Beams And Slabs Shall Have Drip Moulds To Prevent Damage Due To Water Sipping Into The Eaves Or Ceiling. Section Details Shall Be Required To Show The Drip-mould.  Acoustic Panels: Adding Absorptive Finishes, Such As Fabric-covered Acoustic Panels, Can Help To Dampen Internal Reflections And Improve Sound Quality Within Rooms, Although These Don’t Block Sound But Reduce Reverberation.  Non-cove Light Placement: Instead Of Cove Lighting, Use Flush-mounted Lighting Directly In The Ceiling With Sealed Housings That Prevent Dust Buildup. Fixtures Should Be Durable, Non-reflective, And Easy To Clean Without Requiring Special Maintenance Procedures. 5. Doors And Windows  Major Rooms That Require Security Shall Have Sturdy Doors E.g. Wood Panel, And Metal.  Minor Rooms That Do Not Require Security Shall At Least Have Wood Flush Doors.  Toilets And Other Wet Areas Shall Have Steel Doors.  Heavy-use Doors, E.g. Operating Rooms, Delivery Rooms, Should Be Provided With Stainless Steel Kick Or Push Plates And Door Closers.  Fire Escape Doors Should Be Provided With Panic Hardware And Door Closers, And Shall Conform With The Requirements Of The Fire Code Of The Philippines.  Aluminum Frames Of Glass Doors Shall Be Powder-coated.  Door Finish And Color Shall Be Approved First Before Application.  Window Sills Shall Be Slightly Sloped Outwards To Prevent Damage To Windows And Paint Due To Water Seepage. Section Details Shall Be Required To Show This Slope.  All Doors Of A High-occupancy Room Shall Swing Outwards And As Required By The Fire Code Of The Philippines.  Door Jambs With No Moulding/casing Installed On Concrete Walls Shall Have Construction Grooves All Around. Provide Details.  All Doors And Windows Shall Have Reinforced Concrete Lintel Beams. Provide Details.  Door Seals And Frames: For Soundproofed Rooms, Also Use Solid-core Doors With Perimeter Seals To Prevent Sound From Leaking Through Door Frames. 6. Stairs, Ramps And Corridors  Ramps For Persons With Disability Shall Have A Slope Not Higher Than 1:12. Handrails And Clearances Shall Conform With The Requirements Of Bp 344.  Regular Stairs Shall Have Risers At 150mm. High And Treads At 300mm. Wide. Fire Stairs Could Have A Maximum Riser At 200mm. And Tread At 250mm. Handrails Shall Be 1100mm. High. Clearances Shall Conform With The Requirements Of The Fire Code Of The Philippines.  Corridors Shall Have A Minimum Unobstructed Width Of 2450mm. This Shall Be Measured Clear From The Surface Of The Finished Wall And Not On-center Of The Rough Chb Wall.  Corridors Shall Not Be Areas For Temporary Or Permanent Storage Of Stretchers, Wheelchairs, Trolleys, Food Carts, Oxygen Tanks Or Other Movable Hospital Equipment. Storage Or Parking Spaces Shall Be Provided For These.  Corridors And Exit Doors Shall Conform With The Requirements Of The Fire Code Of The Philippines. 7. Fixtures And Accessories  Three-way Electrical Light Switches Shall Be Provided At The Foot And The Top Of The Stairs Per Floor. Likewise, At Both Ends Of A Long Corridor.  Electrical Light Switches Shall Be Located By The Knob Side Of The Door.  Electrical Switches And Outlets Shall Be Installed Plumb And Level.  Public Toilets Shall Always Be Provided With Heavy-duty Soap Dispensers And Electric Hand Dryers.  Public Toilets Shall Always Be Provided With Stainless Steel Handrails In Conformity To The Requirements Of Bp 344.  A Drainage Line Shall Be Provided For Window-type Air Conditioners. Likewise, Split-type Air Conditioners Located In The Interior Part Of The Building Shall Be Located Adjacent To Areas With Drainage Lines, E.g. Toilets, Downspouts, Balconies.  Seal Gaps And Openings: Ensure All Joints, Gaps, And Penetrations (e.g., Electrical Outlets, Ducts) Are Sealed With Acoustical Caulk Or Gaskets To Prevent Sound Leakage.  Sterile Area Lighting Type: Use Sealed, Recessed, Or Surface-mounted Led Fixtures That Are Flush With The Ceiling Surface To Prevent Dust Accumulation. 8. Roofing Works  The Section Of The Roof Gutters Shall Be Designed, In Case Of A Clogged Downspout, So That The Overflow Of Water Will Be Directed Outside Of The Building And Not Towards The Eaves Or Interior Ceiling To Prevent Any Damage. Provide Details.  Avoid Valley Or Inside Gutters In Roof Design. But In Cases Required In Aesthetic Design, Valley Or Inside Gutters Shall Be In Stainless Steel Or Concrete Gutters With Membrane-type Waterproofing, And The Section Shall Be Designed With A Capacity For Big Volume To Prevent Any Damage Due To Overflow. Provide Details.  Parapets, Designed As A Roof Protection From The Winds, Must Be Designed To Satisfy The Preceding Parameters. Provide Details.  The Slope Of The Roof Shall Not Be Less Than 30 Degrees. 9. Painting  Painted Ceiling Shall Be In Flat Latex Finish, While Cornices And Mouldings Shall Be In Gloss Enamel Finish.  Painted Interior Wall Shall Be At Least In Semi-gloss Latex Finish For Ordinary Rooms, E.g. Offices, Unless Specified To A Higher Type Of Paint.  Patient-related Rooms, E.g. Emergency Rooms, Out-patient Departments And Wards, Shall Be In Anti-bacterial And Odor-absorbent Paint Finish.  Special Rooms, E.g. Operating Rooms, Delivery Rooms, And Laboratories Shall Also Be In Anti-bacterial And Odor-absorbent Paint Finish.  Painted Exterior Wall Shall Be At Least In Moisture-resistant/water-repellent Solvent-based Paint Finish, Textured Or Smooth, Unless Otherwise Specified.  Paint Color And Shade Shall Be Approved First Before Application. D. Specific Requirements 1. Provide Spot Detail Plans And Sections Of The Following:  Gutter, Eaves, And Parapet  Ceiling - Covelight, Special Connections And Design, Mouldings, Valances  Stairs - Handrail, And Baluster Design  Ramps - Handrail Design And Floor Pattern  Doors, Windows And Gates - Grille Works,  Special Architectural Treatment And Design, E.g. Façade Design, Special Window And Door, Counters  Special Carpentry Works, E.g. Partitions, Cabinetry  Building And Room Signages And Wayfinding Systems  All Pwd Toilets Shall Be Labelled “all Gender / Pwd Toilet”  Other Details As May Be Required 2. Provide Room Data Sheets, Including Detail Floor Plan, Ceiling Plan And Sections Of The Following Rooms, In Coordination With The Requirements Of The Electrical, Sanitary And Mechanical Designs: A. Cooking Area, Including Furniture And Equipment With Specific Dimensions Of The Location Of Fixtures And Accessories, And In Coordination With The Requirements Of The Electrical And Mechanical Engineering Design. B. Hospital Staff Dining C. D. (all Blanks Shall Be Filled As Required By Or Applicable To The Project.) E. Summary Of Materials  Materials To Be Used Shall Be Fire-resistant, Non-toxic, Moisture-resistant And Termite-resistant, E.g. Fiber Cement Board, Light-gauge Steel Frame, Polyvinyl Chloride Ceiling Panels.  Wet Areas, E.g. Toilets, And Pantry/lounge Shall Use Non-skid/non-slip Vitrified Ceramic Floor Tiles.  Heavy Traffic Areas, E.g. Lobby, And Corridor Shall Use Heavy-duty Seamless Granite Floor Tiles Or A Higher Type Of Floor Material.  Ramps And Stairs Shall Use Non-skid/non-slip Floor Tiles, Materials As Specified.  Aluminum T-runners Shall Be Powder Coated.  Metal Rod Hangers With Adjustable Clips, And Not Galvanized Iron Wires, Shall Be Used To Support And Suspend The Aluminum T-runners And Light Gauge Metal Furrings.  Roofing Sheets Shall Be Ga.# 24 Aluminum-coated, Pre-painted, And Pre-formed. F. Drawing Requirements: See Attached Doh Checklist Of Drawings. -end Of Architectural Design Parameters- Xv. Design Parameters (structural/civil Works) A. Codes And Standards The Civil/structural Design Shall Be In Accordance With The Following Codes And Standards  Codes 1. National Structural Code Of The Philippines (nscp) 2010 2. National Building Code Of The Philippines And Its Revised Irr 3. Accessibility Law 4. Local Codes And Ordinances  Standards 7. Bureau Of Product Standards (bps) 8. Philippine National Standards (pns) 9. Dpwh Blue Book 10. American Concrete Institute (aci) 11. American Society For Testing Materials (astm) 12. American Welding Society (aws) B. Site Works Based On The Master Site Development Plan Of The Hospital, Provide Where Applicable Complete Design And Details Of Hospital Road (concrete With Curb And Gutter, Including Drainage) Network, Walkways, Parking Areas And Fencing. 1. The Main Hospital Road Shall Be Capable Of Two-way Traffic (at Least 6mts. Width) With A Minimum Thickness Of 150mm (8 Inches). Concrete Strength Should Be At Least 3000psi. Interior Roads (leading To Support Facilities) Shall Be Designed To Accommodate Delivery Vehicles, And Fire Trucks In Case Of Emergency. 2. Walkway Should Be At Least 100mm Thk. With Concrete Strength Of 2500psi. Ramps Should Be Provided, Instead Of Steps, For Any Change In Elevations. 3. Parking Area Slabs Should Be At Least 150mm Thk. With Concrete Strength Of 3000psi. 4. Fences Should Be Seen Through In Front Of The Hospital While The Tree (3) Other Sides Should Be Concrete Hollow Blocks With Minimum Height Of 2 Meters And To Be Provided With Perimeter Lighting. See-through Fence Design Will Be Made Of 32mm Square Bars Spaced At 100mm On Center And Provided With Three (3) Concrete Hollow Blocks (45mm High) Zocalo Walls. C. Buildings 1. The Hospital Buildings Should Be Designed Using A Seismic Importance Factor Of 1.5 For The Immediate Occupancy Category. Buildings Should Be Designed In Accordance With Nscp Requirements Up To Magnitude 7 For Those Near Seismic Source Type A. Seismic Gaps Between Buildings (old And New) Should Be Properly Observed. 2. The Hospital Buildings Should Be Designed Also Using Wind Importance Factor Of 1.15 (especially For Design Of Trusses/roofing System). Concrete Gutters And Parapet Walls Should Be Provided As Additional Protection To The Roofing System During Strong Typhoons. Wind Velocity Of 300-350 Kph Shall Be Considered Upon The Recommendation Of Structural Engineer 3. The Structural Designer Should Verify With Philippine Volcanology And Seismology (phivolcs) The Distance Of The Proposed Hospital To Nearest Active Fault Lines And With The Denr For Geo-hazard Mapping. 4. Soil Investigation (at Least Three Boreholes) Should Be Conducted To Determine Soil Bearing Capacity And Recommended Foundation Design (applicable Even For One Storey Structure). 5. The Structural Designer Is Encouraged To Use Fire-resistive And Non-toxic Materials. D. Details – The Following Shall Be Provided: 1. Connection Details Of Beams And Columns Following The Requirements Of Nscp On Confined Areas. 2. Connection Of Trusses To Beams And Columns. 3. Splicing Details Of Reinforcing Bars On Columns And Beams And The Required Bar Cut-off Points. 4. Details For Connection Of New Construction & Old Construction Structural Members Such As Expansions Joints For Thermal Expansion/contraction. 5. Include Thermal Expansion/contraction Prevention Methodologies Specifically On Soft Joints Areas Between Structural And Architectural Members. E. Summary Of Materials 1. Concrete Shall Be Portland Cement And Conforming To Astm Specification C150, Type I To Type Ii 2. Coarse Aggregates Shall Consist Of Washed Gravel, Crushed Stone Or Rock Or A Combination Thereof Conforming To Astm C33 3. Concrete Hollow Blocks Shall Be A Standard Product Of Recognized Manufacturer Conforming To Pns 16 With At Least 350psi Strength. 4. Reinforcing Bars Shall Conform With Pns Grade 60 For 16mm Dia. And Above And Pns Grade 40 For 12mm Dia And Below. 5. Structural Steel Shall Conform With Astm A36/a6m 6. Bolts And Studs Shall Conform With Astm A 325 7. Welding Electrodes Shall Be E60 Or E 70 And Conform With Aws F. Drawing Requirements: See Attached Checklist -end Of Structural/civil Works Design Parameters- Xvi. Design Parameters (sanitary/plumbing Works) A. Codes And Standards The Sanitary/plumbing Design Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. National Building Code Of The Philippines And Its New Irr 2. Fire Code Of The Philippines 3. National Plumbing Code Of The Philippines (npcp) 4. Sanitation Code Of The Philippines 5. Existing Local Codes And Ordinances.  Standards: 1. Bureau Of Product Standards (bps) 2. Philippine National Standards For Drinking-water 3. Underwriters Laboratory (ul) 4. Doh National \ Laboratory (nrl) 5. Doh Health Care Waste Management Manual 6. National Water Resources Board (nwrb) 7. National Plumbers Association Of The Philippines (nampap) 8. Philippine Society Of Sanitary Engineers, Inc. (psse) B. Site Works  Based On The Master Site Development Of The Hospital, The Site Works Shall Provide Complete Layout Of The Following: 1. Storm Drainage Network, Indicating Drainage Manholes And Pipe Culvert; 2. Sewerage Pipe Network, Indicating Sewage Manholes, Sewage Pipes And The Location Of The Proposed Sewage Treatment Plant; And 3. Water Supply Network, Indicating The Location Of Water Service Entrance, Cisterns, Elevated Water Tank And Proposed Pump House.  The Storm Drainage Network Shall Accommodate The Magnitude Of Peak Rates Of Surface Run-off Including Drainage Coming From The Buildings. The System Shall Be Capable Of Handling The Design Flows Routing To The Designated Outfall; For Rainfall Calculation And Sizing Of Drainage Pipes, Refer To Table-d2, Appendix-d, National Plumbing Code Of The Philippines And Current Rainfall Record From Pagasa.  The Sewerage Pipe Network Design Shall Accommodate All Sewage Coming From All The Facilities, Conveyed By Gravitational Flow Leading To The Sewage Treatment Plant; Per Capita Wastewater Demand: 100-130 Gal/capita/day Per Bed C. Building Facilities Sanitary/plumbing System 1. Sewer Line And Vent System  Provide Complete Sewer Line And Vent System From All (domestic) Plumbing Fixtures And Floor Drains, Laid By Gravity Flow Leading To The Sewage Treatment Plant (stp);  For Demand Weight Of Fixtures In Fixture Units; Refer To Appendix A, Table A-2, Npcp 2. Wastewater Line And Vent System  For All Wash Areas Dealing And Generating With Oil/grease, Provide Separate Wasteline And Vent System And Solely Tap To The Proposed Grease Trap And Then Connect Its Effluent To The Sewage Treatment Plant.  For Estimated Demand Weight Of Fixtures In Fixture Units; Refer To Appendix A, Table A-2, Npcp Waterline System  Provide Complete Cold Water Supply Pipes To All Plumbing Fixtures. From The Main Water Source, The Water Shall Be Pumped To The Elevated Water Tank (ewt) And Conveyed To The Fixtures By Gravity System And Or Distributed To Fixtures By Transfer Pumped With Constant Pressure Through A Pneumatic Storage Tank, Whichever Is Feasible. 4. Storm Drainage System  Complete Storm Drainage System Shall Be Provided For All Roofs, Canopies, Concrete Ledges And Balconies Including Condensate Drains Laid For Gravity Flow Connected To A Leader/pipe Line Leading To The Natural Ground Level Storm Drainage Network. D. Specific Requirements  Provide Details Of The Following: 1. Grease Trap (for Dietary) 2. Provision Of Water Softener 3. Fiberglass Pressure Tank E. Summary Of Materials  Sewer And Vent Pipes; Unplasticized Polyvinyl Chloride (upvc) Extra Series 1000 (conforming To Iso 3633 Astm D2729 Including Trims And Fittings)  Storm Drainage Pipes; Downspouts, Unplasticized Polyvinyl Chloride (upvc) Extra Series 1000 (conforming To Iso 3633 Astm D2729 Including Trims And Fittings, Bps Certified)  Drainage Pipes; 250mm Dia. And Below, Non-reinforced Concrete Pipe (nrcdp)  300mm Dia. And Above, Reinforced Concrete Pipe (rcdp)  Drainage Manholes; Street Inlet, Curb Inlet, Traffic Type Reinforced Concrete Area Drain/catch Basin, Reinforced Load Bearing Chb  Sewage Manholes; Traffic Type Reinforced Concrete With Standard Steel Brass Cover  Wastewater Pipeline; Extra Heavy (xh) Single Hub, Hub Less Cast Iron Pipes And Fittings (cip) Conforming To Astm Standard 888  Cleanouts; Cast Iron Brass With Countersunk Plug (bps Certified)  Floor Drains/deck Drains; Cast Iron Brass (bps Certified)  Gutter Drains; Cast Iron Dome Type Brass (bps Certified)  Cold Waterline Pipes; For Buildings, Polypropylene Pn10 Fusion Weld Pipes Including Trims And Fittings (bps Certified)  Hot Waterline System; For Buildings, Polypropylene Pn20 Fusion Weld Pipes Including Trims And Fittings (bps Certified)  Trench Grating; Galvanized/stainless Steel Iron Grates  Plumbing Fixtures Including Trims, Fittings And Accessories; (bps Certified)  Water Closet-tank Type Push Button Flush  Lavatory - (pedestal/counter Type) With C-spout Spray Faucet  Kitchen Sink-ga#16 Stainless Steel Seamless Bowl With Gooseneck Faucet  Urinal-wall Hung Flush Valve Type  Plumbing Fixtures At Sterile Areas; A. Scrub-up Sink-ga#16 Stainless Steel (single/double Bowl) Compartment With Knee Operated And Or Censor Controlled Spay Faucet B. Surgical Soap Dispenser-ga#16 Stainless Steel Foot Operated C. Laboratory Sink-ga# 16 Stainless Steel Deep Seated Seamless Bowl Compartment With C-spout Spray Faucet F. Drawing Requirements: See Attached Doh Checklist Standards Based On Revised Irr Of The National Building Code Of The Philippines (pd 1096) -end Of Sanitary/plumbing Works Design Parameters- Xvii. Design Parameters (mechanical Works) A. Codes And Standards The Mechanical Design Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. National Building Code Of The Philippines And Its New Irr 2. Fire Code Of The Philippines 3. Mechanical Engineering Code Of The Philippines (me Code) 4. Existing Local Government Codes And Ordinances.  Standards: 1. Bureau Of Product Standards (bps) 2. Philippine National Standards (pns) 3. Underwriters Laboratory (ul) And Factory Mutual (fm) 4. International Electrotechnical Commission (iec) 1988 5. National Fire Protection Association (nfpa) 6. National Fire Protection Association (nfpa) 99 Standard For Health Care Facilities. 7. American Society Of Heating, Refrigeration And Air Conditioning Engineers (ashrae). 8. Center For Disease Control And Prevention (cdc) Manual. B. Automatic Fire Sprinkler System  The Automatic Fire Sprinkler System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. Site Development Plan And Vicinity Map, Indicating The Location Of The Buildings, Firewater Reserve Tank, Firewater Line, Yard Loop And Private Fire Hydrant. 2. General Notes, Legends And Symbols Including Schematic Diagram Of The Fire Sprinkler System And Schematic Diagram Of Alarm Monitoring System. 3. Floor Layout And Isometric Layout Of The Automatic Fire Sprinkler System Indicating Pipe Sizes And The Location Of The Pipes, Valves, Sprinkler Heads, Riser Nipples, Fire Hose Cabinets, Sprinkler Main Riser, Drain Pipes, Cross Mains, Branch Lines, Inspector’s Test Connections, Hangers And Sway Braces. 4. Equipment Schedule, Detail Drawings, Fire Pump And Jockey Pump Layout. 5. Architectural, Structural, Electrical And Plumbing Drawings Of The Firewater Tank And Pumphouse.  An Automatic Fire Sprinkler Shall Be Provided In All Hospital Building Except For Those Fire Resistive One-storey Hospital Building.  Hazard Classification Shall Be Light Hazard Occupancy.  Area Of Coverage Shall Be 146 Square Meters And Water Density Shall Be 4.07 Lps/sq. M.  Protection Area Per Sprinkler Head Shall Be 20 Square Meters At 2.2 Meters Minimum Distance Between Sprinklers And 4.2 Meters Maximum Spacing.  All Floor Control Valves Shall Be Equipped With Supervisory Switch, Water Flow Detector And Drain System.  Water Supply Shall Be Horizontal Split Case Centrifugal Fire Pump With Diesel Engine Or Ac Motor And A Vertical In-line Jockey Pump With Controller.  Firewater Reserve Tank Shall Be Ground Level Monolithic Concrete Tank Sized For A Minimum Of 30 Minutes.  Hydraulic Calculations Report Shall Be Based On Npfa-13 Format. C. Ventilation And Air Conditioning System  The Ventilation And Air Conditioning System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. General Notes, Legends And Symbols Including Schematic Diagram Of The Ventilation And Air Conditioning System. 2. Floor Layout Of The Ventilation And Air Conditioning System Indicating The Capacity And Location Of The Air Conditioners And Fans. 3. Duct Layout Indicating Duct Sizes, Route And Location Of The Dampers, Diffusers, Return Air Register, Hangers And Sway Braces. 4. Refrigerant Piping Layout Indicating Pipe Sizes, Location Of Valves, Hangers And Sway Braces. 5. Equipment Schedule And Details Drawings Of Air Conditioners And Ventilating System.  Air Conditioning System Shall Be Provided In All Patient’s Private Rooms, Operating Rooms, Delivery Rooms, Offices And Other Areas Where Conditioned Air Is Necessary.  Cooling Load Calculations Report Shall Be Manual Or Computer Generated, Hourly Analysis Program Which Includes Heat Transmission Coefficients, Solar Heat Gain Factors And Corrected Cooling Load Temperature Difference Calculations.  Split Type Air Conditioners Will Be Used At Areas With Larger Capacities.  Window Type Air Conditioners Shall Be Used In Areas With Exterior Wall Exposure.  Centralized Air Conditioning Will Be Used As Indicated On Space Requirements (e.g. Sterile Hallways).  Maintain An Air Change Rate Greater Than Or Equal To 12 Air Changes Per Hour Or 145 Liters Per Second Per Patient.  Ceiling Cassette Type Exhaust Fans With Integral Air Diffuser Shall Be Provided In All Toilets.  Ceiling Fans, Orbit Type With 360° Oscillation Shall Be Provided In All Non-air-conditioned Rooms, As Mentioned On Space Requirements. D. Specific Requirements  Provide Details Of The Following: 1. Lpg Pipeline 2. Kitchenhood And Smokestack E. Summary Of Materials 1. Automatic Fire Sprinkler System A. The Fire Pump Shall Be Ul Listed/fm Approved, Diesel Engine Or Electric Motor Driven, Designed Specifically Intended For An Automatic Water Sprinkler Protection System. B. The Jockey Pump Shall Be Ul Listed/fm Approved, Electric Motor Driven, 220v, 3-phase, 60 Hertz, And Electric Power Connection. C. Sprinkler Head Shall Be Ul Listed/fm Approved, Pendant, Upright Or Sidewall Unit, 83 Lpm Flow Capacity Per Head And Temperature Fusing At 57.5° C To 74°c. D. The Alarm Assembly Shall Be Ul Listed/fm Approved, Constructed And Installed That Any Flow Of Water From The Sprinkler System Equal To Or Greater Than That From The Single Automatic Head Shall Result In An Audible And Visual Sign In The Vicinity Of The Building. E. Alarm And Supervision System Of The Automatic Water Sprinkler Shall Include The Monitoring Water Flow Switch At Each Floor Of The Building, Fire Pump And Jockey Pump Running Condition And Power Supplies, Level Of Water In The Reservoir And Control Valves. F. Pipes Shall Be B.i. Schedule 40. Screw Fittings Shall Be Used For Inside Piping. 2. Air Conditioning And Refrigeration System A. Refrigerant Pipes Shall Be Copper Tubing, Type L Or K Black Steel Pipe, Schedule 40 For Size Of 100mm Diameter And Smaller. Pipe Over 100mm Shall Be Black Steel Pipe Schedule 40. B. Black Steel Pipes Shall Be Standard Seamless, Lap-welded, Or Electric Resistant Welded For Size Of 50mm Diameter And Larger, Screw Type For Size 38mm Diameter And Smaller, Fittings For Copper Tubing Shall Be Cast Bronze Fitting Designed Expressly For Brazing. C. Pipe Insulation Shall Be Performed Fiberglass Or Its Equivalent. The Insulating Materials Shall Be Covered With 100mm X. 13mm Thick Polyethelene Film, Which Shall Be Overlapped Not Less Than 50mm. D. Ducts Shall Be Galvanized Sheet Steel Of Standard Gauges. E. Ductwork Insulation Materials Shall Be Rigid Board Made Of Styropor Or Equivalent 25mm Thick For Ground And Top Floor, 13mm Thick For Intermediate Floor. -end Of Mechanical Works Design Parameters- Xviii. Design Parameters (electrical/auxiliary Works) A. Codes And Standards The Electrical System Design Parameters Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. Philippine Electrical Code 2. National Electrical Code 3. Fire Code Of The Philippines 4. National Building Code Of The Philippines And Its New Irr 5. Existing Local Codes And Ordinances  Standards: 1. Bureau Of Product Standards (bps) 2. Underwriters Laboratory (ul) 3. National Fire Protection Association 4. International Electrotechnical Commission (iec) 5. Illumination Engineering Society (ies) 6. National Electrical Manufacturer’s Association (nema) 7. Doh Manual On Technical Guidelines For Hospital And Health Facilities Planning And Design B. Building Facilities Electrical System 1. Lighting System  Provide And Install Adequate Normal Branch Circuits For Lighting System To All Areas Using The Standard Lighting Design Analysis. Utilize The Standard Illumination Requirements Per Area Of Concern Using The Preferred Particular Type Of Luminaires. 2. Power System  Provide And Install Adequate Normal Branch Circuits For The Power System. 3. Standby/emergency System  Provide And Install Adequate Life Safety And Critical Emergency Branch Circuits For Lighting Or Utilization Equipment Connected To The Alternate Power Source. 4. Auxiliary System Provide And Install The Following Auxiliary System:  Communication System A. Telephone System B. Local Area Network System C. Public Address Paging System D. Private Branch Exchange (pabx) E. Master Or Cable Antenna Television  Fire Alarm System  Security System 5. Lightning Protection System  The Building Lightning Protection System Shall Include Roof-mounted Air Terminals Grounding Conductors, Ground Rods, Conduits, Clamps, And Auxiliary Equipment As Required For A Complete And Operational Lightning Protection System. 6. Provide Details Of The Following:  Lighting Fixtures/luminaires  Panelboard And Circuit Breakers  Switchgear And Other Metering Devices  Electrical And Hospital Equipment  Installation And Termination Of Auxiliary And Other Special Devices And Equipment  Power And Telephone Handholes (as May Be Required)  Pedestal And Service Entrance To Bldg.  Grounding System Layout  Substation/power House And Electrical Room  Transformer And Generator Mounting  Others As May Be Required. C. Summary Of Materials  General Lighting Luminaries: Fixtures Type Shall Be As Indicated On The Lighting Layout Plan. 1. Fluorescent Lamp Shall Be Linear, Circular Or Self-ballasted Compact Fluorescent Lamps. 2. Fluorescent Lamps Shall Be Cool Or Warm White And 3. Lamp Holders Shall Be Made Of Thermosetting Plastic. 4. Fluorescent Ballast: Magnetic Or Electronic Type With High Power Factor Or High Frequency Energy Saving Type. 5. Fluorescent Fixture Housing Shall Be Steel Sheet With High Reflectance Powder Coat Paint Finish. 6. Downlights And Pin Lights Shall Be Of Heavy Gauge Spun Aluminum Equipped With Lamp As Indicated On The Drawings. 7. Other Special Lighting Requirements Shall Be As Approved By The Implementing Agency. 8. Sterile Areas/zones Lighting Specifications: A. Type: Use Sealed, Recessed, Or Surface-mounted Led Fixtures That Are Flush With The Ceiling Surface To Prevent Dust Accumulation. B. Lux Level: Aim For 300-500 Lux For General Sterile Areas; 1000 Lux Or More May Be Needed In Surgical Suites Or Examination Zones Or As Specified On Manual Of Technical Guidelines For Hospital Planning And Design (level 3)  Wiring Devices: Wiring Devices Shall Be Non-automatic Control Devices, The Contact Is Guaranteed By The Pressure Of The Special Spiral Springs. 1. Switches Shall Be Of 15a, 250v Or 300v Except As Otherwise Noted And Approved. Terminals Shall Be Screw-type Or Quick-connected Type. 2. General Use Receptacle Shall Be 15a, 240v Grounding Type Unless Otherwise Indicated On The Drawings. 3. Special Purpose Receptacles Shall Be As Called For On The Drawings. 4. Matching Plugs Shall Be Supplied.  Panelboards And Circuit Breakers: The Panelboard And Circuit Breakers Shall Be Equipped With Molded-case Circuit Breakers And Shall Be The Type As Indicated In The Panelboard Schedule And Details. 1. Provide Molded-case Circuit Breakers Of Frame, Trip Rating And Interrupting Capacity As Shown On The Drawings. The Circuit Breakers Shall Be Quick-make, Quick Break, Thermal-magnetic, Trip-indicating And Shall Have Common Trip On All Multiple Breakers With Internal Trip Mechanism. 2. All Current-carrying Parts Of The Panelboards Shall Be Plated. Provide Solid Neutral (s/n) Assembly When Required. The Assembly Shall Be Isolated From The Enclosure.  Electrical Conduits, Boxes And Fittings: All Conduits, Boxes And Fittings Shall Be Standard Rigid Steel, Zinc Coated Or Galvanized. 1. Rigid Steel Conduits (rsc) 2. Rigid Metal Conduits (rmc) 3. Intermediate Metal Conduits (imc) 4. Electrical Metallic Tubing (emt) 5. Unplasticized Polyvinyl Chloride (upvc) If Required Shall Be Schedule 40.  Conductors: Wires And Cables Shall Be Of The Approved Type And Unless Specified Or Indicated Otherwise, All Power And Lighting Conductors Shall Be Insulated For 600 Volts. 1. The Conductors Used In The Wiring System Shall Be Of Soft-annealed Copper Having A Conductivity Of Not Less Than 98% Of That Of Pure Copper And Insulated For 60° C Temperatures. 2. All Conduits Of Convenience Outlets And Wire-ways For Lighting Branch Circuit Home-runs Shall Be Wired With A Minimum Of 3.5 Mm Square In Size.  Master Antenna Television (matv) And Cable Television (catv) System: 1. Two Sources Of Tv Signals Shall Be Provided To The Building. One (1) Shall Be From A Master Antenna Installed At The Roof Or Within A Suitable Area Of The Building And The Other Will Be From A Commercial Cable Television Service. 2. The Master Antenna System Shall Consist Of Fm, Vhf And Uhf Antennas, Combiner, Distribution Amplifier, Coaxial Cables, Splitters, Tap-offs And Tv Outlets. 3. There Shall Be Individual Trunking For Master Antenna And Cable Television Rising In The Building.  Structured Cabling & Telephone System: 1. A Minimum Provision For Estimated 500 Mixed Pabx Extension And Direct Telephone Lines Shall Be Required For Tertiary Hospitals. 2. Final Details Of The System Shall Follow Specific Requirements, Quantity And Type Of Service.  Fire Detection And Alarm System: 1. The Fire Detection And Alarm System Shall Be Of Multiplex, Microprocessor- Controlled Addressable Or Zonal Conventional Fire Detection, Alarm And Communication System. 2. The System Shall Consist Of Full Integration Automatic Fire Detection, Voice Alarm Communication And Fire Fighters Telephone System. 3. The System Shall Consist Of Control Station, Mimic Panel Initiating And Indicating Devices, Control Modules And System Of Wirings. 4. Actuation Of The Protective Signaling System Shall Occur By Manual Pull Station, Automatic Smoke Or Heat Detector, Sprinkler Flow Switch And Tamper Switch. 5. The System Shall Be Able To Monitors The Status Of Flow Switches And Supervisory Switches Installed At The Sprinkler System Risers. These Monitoring Points Are Also Addressable Or The Conventional Zonal In The Same Way As The Detectors Are Making Them Easily Recognizable At The Control Panel. 6. Occupant Notification Shall Be Accomplished Automatically. Notification Will Be General, Audible Alarm Type Complying With Appropriate Section Of Nfpa. 7. The System Shall Be Installed With Provisions For Future Connection To The Nearest Fire Services Station In The Locality.  Security System: 1. The Security System Shall Include Intrusion Detection And Alarm, Cctv, Access Control Or As Maybe Required.  Ventilation And Air Conditioning System The Ventilation And Air Conditioning System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. General Notes, Legends And Symbols Including Schematic Diagram Of The Ventilation And Air Conditioning System. 2. Floor Layout Of The Ventilation And Air Conditioning System Indicating The Capacity And Location Of The Air Conditioners And Fans. 3. Duct Layout Indicating Duct Sizes, Route And Location Of The Dampers, Diffusers, Return Air Register, Hangers And Sway Braces. 4. Refrigerant Piping Layout Indicating Pipe Sizes, Location Of Valves, Hangers And Sway Braces. 5. Equipment Schedule And Details Drawings Of Air Conditioners And Ventilating System. A) Air Conditioning System Shall Be Provided In All Patient’s Private Rooms, Radiologic And Imaging Area, Operating Rooms, Delivery Rooms, Laboratories, Critical Care Areas, Offices And Other Areas Where Conditioned Air Is Necessary. B) Cooling Load Calculations Report Shall Be Manual Or Computer Generated, Hourly Analysis Program Which Includes Heat Transmission Coefficients, Solar Heat Gain Factors And Corrected Cooling Load Temperature Difference Calculations. C) Split Type Air Conditioners Will Be Used At Areas With Larger Capacities. D) Window Type Air Conditioners Shall Be Used In Areas With Exterior Wall Exposure. E) Centralized Air Conditioning Will Be Used Only If Feasible. F) Design Of All Critical Areas Shall Be Laminar Or Positive Pressure, Wherein The Supply Air Is 10% More Than Exhaust Air. G) All Infectious Isolation Rooms, Such As Tb And Sars, Shall Be Negative Pressure, Wherein The Exhaust Air Is More Than 10% Of The Supply Air. H) Maintain An Air Change Rate Greater Than Or Equal To 12 Air Changes Per Hour Or 145 Liters Per Second Per Patient. I) Ceiling Cassette Type Exhaust Fans With Integral Air Diffuser Shall Be Provided In All Toilets. J) Ceiling Fans, Orbit Type With 360° Oscillation Shall Be Provided In All Non-air-conditioned Rooms, Such As Patient Wards, Work Areas, Etc.  Air Conditioning And Refrigeration System 1. Refrigerant Pipes Shall Be Copper Tubing, Type L Or K Black Steel Pipe, Schedule 40 For Size Of 100mm Diameter And Smaller. Pipe Over 100mm Shall Be Black Steel Pipe Schedule 40. 2. Black Steel Pipes Shall Be Standard Seamless, Lap-welded, Or Electric Resistant Welded For Size Of 50mm Diameter And Larger, Screw Type For Size 38mm Diameter And Smaller, Fittings For Copper Tubing Shall Be Cast Bronze Fitting Designed Expressly For Brazing. 3. Pipe Insulation Shall Be Performed Fiberglass Or Its Equivalent. The Insulating Materials Shall Be Covered With 100mm X. 13mm Thick Polyethylene Film, Which Shall Be Overlapped Not Less Than 50mm. 4. Ducts Shall Be Galvanized Sheet Steel Of Standard Gauges. 5. Ductwork Insulation Materials Shall Be Rigid Board Made Of Styropor Or Equivalent 25mm Thick For Ground And Top Floor, 13mm Thick For Intermediate Floor. -end Of Electrical Works Design Parameters- Xix. Design Parameters (green And Safe Health Facilities)  Codes And Standards Green And Safe Health Facilities Shall Be In Accordance With The Following Laws, Codes And Standards.  Global Initiatives & Developments: 1. World Health Assembly Resolution On Universal Health Care (2019) 2. World Health Resolution On Climate Change And Health (2008) 3. Un Resolution On Sustainable Development Goals (2015) 4. Global Action On Patients’ Safety  Laws And Codes: 1. Sanitation Code Of The Philippines Irr Of Chapter Xvii 2. The Local Government Code Of 1991 3. Clean Water Act Of 2004 4. National Building Code Of The Philippines (pd 1096) 5. General Appropriation Act Fiscal Year 2021 (ra 11518) 6. Occupational Safety And Health (ra 11058) 7. Safe Hospital Initiative (2011) 8. Universal Health Care Act (ra 11285) 9. Implementing Rules And Regulations Of Accessibility Law (ra 344) 10. Ecological Solid Waste Management Act Of 2000 (ra 9003) 11. Climate Change Act Of 2009 (ra 9729) 12. Other Related Standards A. Guidelines The Green And Safe Hf Initiative Represents A Climate Smart Paradigm Shift, Away From Traditional Disaster Response To One That Proactively Seeks To Minimize The Health Impact Of Disasters And Emergencies Through Climate Adaptation And Mitigation Measures (including Climate-proofing And Reduction Of The Environmental Footprint), And Preparedness. Consequently, It Is Essential That This Green Manual Is Incorporated Into The Hospital And Hf Development Agenda That Are Backed With Earmarked Resources In The National Budget, And That Has Governance And Support From The Highest Levels Of Government.  The Department Of Health Shall, As Much As Possible, Promote The Greening Of Hospitals And Health Facilities, Including The Improvement Of Energy And Water Efficiency And Conservation, Sustainable Cooling Systems, And Sustainable Healthcare Waste Management In Hospitals.  In Line With Its Continuing Efforts In Green And Safe Hfs, The Doh Shall Encourage National And Local Government Hospitals And Other Hfs To Seek Green Certifications From Green Building Rating System/s For Their New Construction Or Expansion, Repair And Renovation Projects. B. Criteria And Compliance System For Outstanding Green And Safe (climate Smart) Health Facilities.  Criterion Compliance 1. Governance – Leadership And Management, Trainings, Proper Implementation, Commitment 2. Energy Efficiency – Reduction Of Energy Consumption, Use Of Renewable And Clean Energies 3. Water Efficiency, Sanitation And Hygiene – Adequate Water, Water Reuse/recycling, Water Conservation, Rainwater Harvesting. Safe Drinking Water, Proper Use And Maintenance Of Sanitary Toilet Facilities 4. Health Care Waste Management Waste – Segregation, Collection, Storage, Transport, Treatment, Proper Waste Disposal, Recycling 5. Environmentally Resilient Health Facility – Structural Member, Non-structural Member, Emergency And Disaster Preparedness Plan 6. Site Sustainability – Healing Gardens Within, Fresh Air, Herbal Plants, Accessibility, Existence Of Alternative Routes 7. Material Sustainability – Use Of Sustainable Materials, Procurement Of Sustainable And Recyclable Products, Less Use Of Hazardous And Toxic Substances 8. Indoor Environmental Quality – Lighting, Ventilation, Interior Design, Air Quality Management C. Energy Efficiency  Orientate Building & Façade Design To Mitigate Heat Gain. The East And West Facades Receive The Greatest Solar Radiation, And Should Be Designed To Avoid Direct Sun.  Use Of Glass/glazing With A Lower U-value And Shading Coefficient Reduce Solar Heat Gain.  Allow Provision For Easy Access For Maintenance And Cleaning Especially For Curtain Wall System.  Consider Lifespan, Durability And Life Cycle-costing When Selecting Façade Materials.  Install And Use Energy-efficient Lighting Fixtures I.e. Led, Cfl, Slim Type Fluorescent, Etc.  Skylights (if Applicable) And Windows To Maximize Natural Lighting And Ventilation On Selected Areas. Utilizing Daylight As Possible.  Use Of Appliance With Inverter Technology With Variable Frequency Drive Technology.  Window And Door Assemblies Shall Have Complete Gaskets, Weather Stripping, Door Bottom Sweeps And Seals.  All Operable Windows Shall Be Provided With Safety Features For Protection Against Strong Winds, Water Penetration And Protection For Building Occupants Including Child Safety And Security.  Specific Air Exchange Rates Are Usually Attained Through Artificial Ventilation. Adequate Ventilation Throughout The Facility Contributes To Maintaining A Hygienic Environment. Presence Of Functional Windows And Doors, That Allow At Least 6-8 Air Changes Per Hour For Natural Ventilation. For Airborne Infection Isolation Room/s And Er/triage Areas, Greater Or More Than 12 Air Changes Per Hour Is Recommended, While Up To 15 Air Changes Per Hour May Be Recommended For Operating Procedure, Or Delivery Rooms.  Light-colored Building Envelopes Is Also Recommended To Reduce Heat Transfer From The Outside To Inside Of The Building By Having Surfaces With High Solar Reflectance Index (sri). D. Water Efficiency, Sanitation And Hygiene  Optimize Water Conservation Through Installation Of Rainwater Harvesting Cistern Tank  Use Of Waterless Urinals And Dual Flush Water Closets.  Use Of Low-flow & Water Efficient Faucet And Hand-held Bidets.  Use Of Water-saving Shower Heads  For Hospitals, There Must Be At Least One Water Closet For Every Eight Patients In Compliance With Ra 4226 – Hospital Licensure Act.  A Separate Toilet For Male And Female Is Preferred, And Shall Be Pwd Accessible. And, A Separate Toilet For The Staff, With A Provision Of One Toilet For Every Fifteen Personnel Shall Be Applied.  Waterless Urinals Must Be Provided For Male Toilets.  There Should Be Sufficient And Functional Hand-washing Facilities. E. Environmentally Resilient Health Facility  Ground Floor Must Be Above Ground Line And Anticipated Flood Level. F. Material Sustainability  Building Materials, If Applicable, Must Be Locally Sourced To Minimize Carbon Footprint.  Rapidly Renewable And Sustainable Materials Are Also Recommended. Refer To Sec. 16.3.4 Of Doh Green And Safe Health Facilities Manual For List Of Sustainable Construction Materials That Can Be Used.  Use Of Materials (specifically Wet-applied Materials) That Are Low In Vocs (volatile Organic Compounds) G. Site Sustainability  Adopt The Development Controls Indicated In The National Building Code Of The Philippines To Establish The Extent Of The Health Facility Site Can Develop.  Biophilic Design Is Recommended To Help Reduce Stress, Improve Cognitive Function And Creativity, Improve Patients’ Well-being And Expedite Healing.  Porous Pavement Is Recommended At The Site Development To Alleviate Flooding. Landscape Swales Is Also One Solution. H. Indoor Environmental Quality  Harvest Natural Daylight If Applicable.  Acoustic Quality, Especially In Areas/rooms That Needs To Be Soundproofed, Shall Be Maintained.  Use Of Acoustic Privacy Partitions Is Required.  Separate Entrances For Ambulances And Walk-in Patients.  In Procedure Rooms With Windowless Areas, Backlit Photomurals Or Artificially Illuminated Glass Artwork Can Alleviate Feeling Of Claustrophobia.  In Wards And Recovery Rooms, Provide Windows And Natural Illumination As Much As Possible.  Provide Acoustic Privacy In Patient Rooms, Offices, And Examination Rooms With Partitions Of Sound Transmission Class (stc) Of 45.  Noise Level In The Operational Rooms Must Follow The Minimum Noise Standards In Accordance To The Doh Manual Of The Technical Guidelines For Hospital Planning And Design (level 3) Drawing Requirements: See Doh Standard Checklist Based On Revised Irr Of The National Building Code Of The Philippines (pd 1096). Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation. -end Of Green And Safe Health Facilities Design Parameters- Xx. Build Aspect Furnish Labour, Materials, Equipment, Paint, Tools And Other Facilities To Complete The Entire Building Including Architectural, Structural/ Civil, Electrical, Mechanical, Sanitary, Communication, Fire Protection, And Other Related Works To Complete The Scope As Specified And/or As Shown On Drawings And Plans 1. General Requirement  Contractor’s Temporary Facility And Lay Down Yard.  Communication And Transmittal, Reproduction, Tarpaulin/billboard And Photos  Material Testing (rsb, Chb, Concrete, Steel)  Safety Requirements (warning Signs, Hardhat, Etc.)  As Built Plan  Demolition, Clearing Work, Permits And Licenses 2. Other Items Of Work  Demolition Of Existing Structures In Affected Areas Or Where The Proposed Project Shall Be Situated, Clearing And Disposal Of All Debris Generated During Construction.  All Serviceable Materials Shall Be Turn Over To Doh-dedvmh Through Its Representative  Soil Excavation And Soil Treatment  Restoration Of Any Damaged Properties During The Construction  Permit Fees, And Other Necessary Documents For The Project Shall Be Shouldered By The Contractor  Temporary Facilities Shall Be Provided During The Construction Period, To Be Constructed Within The Hospital Compound, Which Shall Serve As The Field Office, Storage Of Materials And Bunkhouse For The Workers.  No Implementation Of The Project Without An Approved Plan And Other Related Documents.  Strict Implementation Of (dole Guidelines And Other Standards Applicable) Health And Safety Rules.  Shall Abide By The Medical Center Hospital House Rules  Conduct Weekly Progress And Coordinative Report To The Agency Or Its Representative  Other Items Of Work Not Mentioned Herewith But It Is Very Necessary For Execution And Completion Or Works Shall Be Included And Charge To The Contractor 3. Pre-installation Requirements  All Tests To Be Conducted Shall Be Witnessed By The Hospital Representatives.  Soil Investigation  Concrete Strength Testing  Reinforcing Bar Strength Testing  Concrete Masonry Unit (cmu) Testing  All Plumbing And Sanitary System  Automatic Fire Sprinkler System  Ventilation And Air Conditioning System  All Electrical System  And Other Tests That Necessary To Perform To Ensure The Quality Of The Project  All Certifications And Reports Under Post-installation Requirement Shall Be Submitted To The Hospital Representatives.  The Contractor Shall Submit A Sample Of Materials For Approval Of The Medical Center Chief Prior To Installation.  No Implementation Or Execution Of Work In Any Discipline Without The Approval Of Medical Center Chief Or Through Its Representative  Any Request For Inspection, Approval, Concrete Pouring, Testing And Commissioning Must Be Address To Medical Center Chief Or Must Adhere To The Reporting Protocol As Mentioned Above. -end Of Build Aspect- Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Architectural Drawings (as Applicable) A – 1 (a…n) Perspective, Site Development Plan, Vicinity Map/location Plan (2.00 Kms. Radius) Table Of Contents A – 2 (a…n) Floor Plans (scale 1:100m Minimum) Including Furniture Layout When Necessary A – 3 (a…n) Four (4) Elevations (scale 1:100m Minimum) A – 4 (a…n) Two (2) Sections (scale 1:100m Minimum) Including Spot Details When Necessary A – 5 (a…n) Roof Plan/s Showing Downspouts (scale 1:100m Minimum), Including Detail Of Gutter, Downspout, Etc. A – 6 (a…n) Reflected Ceiling Plan/s (scale 1:100m Minimum), Including Details A – 7 (a…n) Details Of Stairs, Fire Escapes/exits, Accessible Ramps, Etc. (scale 1:50m), Including Details Of Railings, Treads, Risers, Etc., In The Form Of Plans, Elevation/section A – 8 (a…n) Details Of Toilets (1:50 M) Including Accessible Toilets In The Form Of Plans, Elevation/section A – 9 (a…n) Details Of Specialized Design Features (scale 1:50 M) Such As Partitions, Cabinets, Etc. And Accessible Design Features A – 10 (a…n) Detail Of Typical Bay Section From Ground To Roof (scale 1:50 M) A – 11 (a…n) Details Of Special Elevations/section Rooms (1:50m) In Form Of Plans, A – 12 (a…n) Schedule Of Doors, Gates, Emergency Exits, Etc. (scale 1:50 M), Including Specifications For Materials And Hardware A – 13 (a…n) Schedule Of Windows (scale 1:50 M), Including Specifications For Materials And Hardware A – 14 (a…n) Schedule Of Finishes For Interior And Exterior Floors, Walls, Ceilings Architectural Technical Specifications Architectural Scope Of Works Architectural Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 1 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Architectural Interior Design Drawings (as Applicable) Aid – 1 (a…n) Floor Plans Showing Layout Of Floor Finishes (scale 1:100m Minimum) Aid – 2 (a…n) Floor Plans Showing Layout Of Furniture/finishing Partitions, Cabinets, Etc. (scale 1:100m Minimum) Aid – 3 (a…n) Interior Elevations And Sections Showing Wall Patterns, Ceiling Sections, Etc. (scale 1:100m Minimum) Aid – 4 (a…n) Details Of Partitions, Cabinets, Furniture, Ceiling And Other Interior Design Features (scale 1:100m Minimum) Aid – 5 (a…n) Architectural Interior Perspective/s Architectural Interior Design Technical Specifications Architectural Interior Design Scope Of Works Architectural Interior Design Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 2 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Structural Drawings (as Applicable) S – 1 (a…n) General Notes And Construction Standards S – 2 (a…n) Site Development Plan S – 3 (a…n) Foundation Plan/s (scale 1:100m Minimum) S – 4 (a…n) Floor Framing Plan/s (scale 1:100m Minimum) S – 5 (a…n) Roof Framing Plan (scale 1:100m Minimum) S – 6 (a…n) Schedule And Detail Of Footings And Columns S – 7 (a…n) Schedule And Detail Of Beams And Floor Slabs S – 8 (a…n) Detail Of Trusses S – 9 (a…n) Details Of Stairs, Ramps, Fire Exits S – 10 (a…n) Other Spot Details Structural Analysis And Design (for 2 Storey Building And Higher) Boring And Land Test Results (for 3 Storey Building And Higher) Seismic Analysis Structural Technical Specifications Structural Scope Of Works Structural Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 3 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Electrical Drawings (as Applicable) E – 1 (a…n) General Notes And Legends E – 2 (a…n) Location And Site Plan E – 3 (a…n) Lighting Layout (scale 1:100m Minimum) Including Details E – 4 (a…n) Power Layout (scale 1:100m Minimum) Including Details E – 5 (a…n) Auxiliary System Layout (scale 1:100m Minimum) Including E – 6 (a…n) Schedule And Detail Of Loads E – 7 (a…n) Riser Diagram E – 8 (a…n) Other Detail Electrical Computation Design Analysis Electrical Technical Specifications Electrical Scope Of Works Electrical Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 4 Of 6 Electronics/auxiliary System Ready For Integrated Communications 1. Telephone System 2. Paging System 3. Lan System 4. Fire Alarm System 5. Security System Cctv 6. Integrated Communications And Systems Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Plumbing/sanitary Drawings (as Applicable) P – 1 (a…n) General Notes And Legends P – 2 (a…n) Location And Site Plan P – 3 (a…n) Storm Drainage Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line To Main Drainage Line P – 4 (a…n) Waterline Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line From Main Water Source When Applicable P – 5 (a…n) Sewerline Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line To Septic Tank Or Existing Sewerline P – 6 (a…n) Isometric Layout, Showing Waterline, Sewerline And Drainage Line P – 7 (a…n) Detail Of Connections, Catch Basins, Downspouts, Etc. P – 8 (a…n) Detail Of Septic Tank/sewer Treatment Plant Design Analysis Sanitary Technical Specifications Sanitary Scope Of Works Sanitary Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 5 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Mechanical Drawings (as Applicable) M – 1 (a…n) General Notes And Legends, Site Development Plan, Location Plans M – 2 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Showing Ventilation And Air Conditioning Systems And Other Installations M – 3 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Gas Pipeline System And Details M – 4 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Air-conditioning Systems And Details M – 5 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Fire Suppression Systems, Fire Sprinkler System, Wet Stand Pipe, Dry Standpipe And Other Installation M – 6 (a…n) Details Water Tank, Flow Diagram (scale 1:50m) M – 7 (a…n) Details Of Firewater Supply Sytem (scale 1:50m) M – 8 (a…n) Detail Of Elevators, Escalators, Dumbwaiters, Etc. (scale 1:50m) M – 9 (a…n) Detail Of Other Machinery/equipment (scale 1:50) M – 10 (a…n) Longitudinal And Transverse Section Of Building (scale 1:100m) Showing Manner Of Support Of Machines/equipment Mechanical Technical Specifications Mechanical Scope Of Works Mechanical Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 6 Of 6 General Guidelines • All Construction Works Shall Be Undertaken By Contractor In Accordance With Existing Laws And All Other Applicable Rules And Regulations. • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To Devmh. • The Contractor Shall Carry Out The Works Properly And In Accordance With This Contract. The Contractor Shall Provide All Supervision, Labor, Materials, Plant And Equipment, Which May Be Required. • The Contractor Shall Commence Execution Of The Works On The Start Date And Shall Carry Out The Works In Accordance With The Approved Pert/cpm Network Diagram Submitted By The Contractor, As Updated With The Approval Of The Procuring Entity’s Representative, And Shall Complete The Works By The Intended Completion Date. • The Contractor Shall Be Responsible For The Safety Of All Activities On The Site. • During On-going Construction And Before The Turn-over Of The Project, Engineering & Facilities Management Staff, End-users, Twg And Bac Shall Inspect The Works Undertaken By Contractor. Hospital Engineers And End-users Discover Any Deviations By Contractor From The Approved Construction Plans, Contractor Shall Be Required To Rectify All Such Deviations, Within Such Period Required By Client. • Contractor Shall Have Full Responsibility For Any And All Damages To Existing Hospital Facilities, Utilities, And/or Any Portion Of The Hospital’s Common Area, Due To The Works Undertaken By Contractor, Whether Accidental Or Intentional. • No Variation Order Shall Be Undertaken Unless Verified By Hospital Engineer And Approved By Executive Committee. • Contractor Shall Not Cover Or Block Stub-outs (cleanouts, Water Source, Exhaust, Sewer, Drainage, Etc.) When Not Utilized. Said Stub-outs Shall At All Times Be Free Of Obstructions And Easily Accessible. • Contractor Shall Secure A Utility Tapping Permit Prior To Tapping From Utility Provision. • Electricity And Water Consumed During Construction Shall Be Charged To Contractor. • End-users Reserves The Right To Inspect The Works At Any Time. • Contractor Shall Insure And Hold Client, Its Affiliates, Officers, Directors, Stockholders, Employees, Agents, And/or Representatives, Free And Harmless From And Against Any Injury, Losses, Claims, Damages, Liabilities, Expenses, And/or Costs Of Litigation, Resulting From Or Arising Out Of The Works Undertaken By Contractor. • In Event Of Force Majeure, The Contractor Shall Rectify, Replace Or Build The Unfinished Projects When It Is Not Yet Completed And Accepted W/o Additional Cost For The Procuring Entity. • Contractor Shall Comply With The Construction House Rules Of This Hospital.

Details: Description Invitation To Bid Project No: 005 – 2025 1. The Department Of Education Through The Fy 2024 Gaa Intends To Apply The Sum Of Seven Million Three Hundred Thirty-eight Thousand Five Hundred Seven And 00/100 (7,338,507.00) Being The Approved Budget For The Contract (abc) Described Below For The Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers. Bids Received In Excess Of Abc Shall Be Automatically Rejected At The Bid Opening. Unit Description Qty Cost Abc (vat Inclusive) 1 Lot Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers 1 1 Unit Learners'/clients' Chart Materials A4 Size 8-1/4 X 11-3/4 Inches Or 210 X 297 Mm Or 29.7 X 21 Cm Laminated Full Color High Quality Print Photopaper 10 70.00 700.00 2 Set Anatomical Model-human Torso Model Size: 1/2 Life Size Material: Pvc, Includes: Stand 1 62,918.00 62,918.00 3 Unit Blood Pressure-blood Pressure Monitor Type: Upper-arm Monitor Type: Digital Cuff Size: 32cm Dimension (w X H X D): 145 X 466 X 145mm Weight: 250g Power Supply: Battery Type: Li-polymer Smart App Availability: Yes, Automatic Shut Off: Wi-fi: No 5 6,560.00 32,800.00 4 Unit Stethoscope: Dual Tube Stethoscope Weight: 185g, Length: 80cm Product Material: Polymer Diaphragm, Listener Material: High-density Stainless Steel Product Composition: Eartip, Ear Hooks, Leaf Spring, Hose Heads, Diaphragms 2 1,380.00 2,760.00 5 Piece Tape Measure-material: Pvc It Has Centimeter Scale On Reverse Side Which Is Up To 300cm Large, Easy To Read Marking Measures Up To 120 Inches 10 300.00 3,000.00 6 Piece Hand Dynamometer - Hand Dynamometer Type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79"" 10 1,900.00 19,000.00 7 Packs Ice Massage Caps- Size: 2 Count (pack Of 1) Measuring 2.9” In Diameter, The Ice Cup Massager Holder Also Fits Comfortably In The Hand. Material: Polyethylene 10 700.00 7,000.00 8 Unit Balance Board- Balance Board Type: Rocker Board Dimensions: 32.28 X 11.81 X 0.59 Inches Weight Capacity: 100 Kg Material: Beech Wood Anti-skid Feature: Not Specified 5 3,700.00 18,500.00 9 Unit Treatment Table- Top Shelf With Guard Rail And Formica Material. Down Shelf, Material Plain Sheet. Mounted On 4 Swivel Caster Rubber Wheels 2″ With 2 Pieces Lock. Size: Lxwxh (28″x20″x34.5″) Painted White 1 17,400.00 17,400.00 10 Unit Exercise Steps-aerobic Step Board 69 X 28 X 15cm. Dimension: 69 X 28 X 15cm Length: 27" Width: 10.5" Adjustable Height Up To 10cm To 15cm. Offers A Secure, Nonslip Surface For Your Workout Routine, Nonskid, Feet Provide Stability & Protect Floors. 5 1,934.00 9,670.00 11 Pair Pediatric Examination Gowns- Assorted For Kids And Adult Pediatric Examination Gowns Opening: Full Open Back. Style: Child Size Color: Jellybean Print. Made With High Quality, 100% Cotton Comfortable, Durable, Washable, And Reusable Hook And Loop Closures At Neck And Mid-back. 10 700.00 7,000.00 12 Piece Towels- Material: High Quality 100% Cotton Terry. 500gm2. Size: 90 X 180cm. 20 300.00 6,000.00 13 Piece Bed Sheets- Material: Cotton + Polyester, Packaging Content: 2 Pcs Pillowcase, 1 Pc Fitted Sheet, Single Size:36"*75"+7.8", Pillowcase Size: 18'*28", Garterized Corners 20 2,000.00 40,000.00 14 Piece Pillows- Pillows, Plain White, Soft Pillow, Size:18x28 Inches 10 900.00 9,000.00 15 Piece Pillowcase- Length: 50 Cm (20 ") Pillowcase Quantity: 1 Piece Width: 80 Cm (31 ") 100 % Polyester 20 180.00 3,600.00 16 Piece Blankets- Length: 160 Cm White Sheet Soft Texture, High Quality Fabric Size: 52 X 90 Inch 20 450.00 9,000.00 17 Unit Step Stools - Step Stools Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. 5 3,600.00 18,000.00 18 Unit Therapist Stools On Wheels-adjustable Height Of 19 - 24". It Comes With A 3" Hi-density Cushion With Multi-layered Padding, And A 14" Seat Diameter. Built With 5 Casters Made Of Plastic Easy To Clean. Color: Black 5 4,950.00 24,750.00 19 Piece Kinesiology Tape-ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant. 97% Cotton, 3% Nylon. 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2""x 16.4"" (5cmx5cm) 20 2,100.00 42,000.00 20 Set Splinting Materials - Rescue Padded Board Splint. 6 Paddes Wood Splint (different Sizes) Sizes: 35"", 25"" And 15". Velcro Straps Color: Blue. 20 4,200.00 84,000.00 21 Unit Paraffin Bath- Large Opening Design: Inner Pot Allows For Hands, Feet, And Elbows To Be Dipped Into The Melted Wax. Alloy Heating Pot Melts Paraffin Wax Blocks In 0.5 Hours. Adjustable Heating Ranges From 86-158°f. Timer: Settable From 1 To 99 Minutes. (free Installation) 2 32,340.00 64,680.00 22 Set Dumbbells Sets- Weight: 37kg Type: Medical Rehabilitation Equipment Total 18 Dumbbells 1 Lb / Piece, 2 Pieces 2 Lbs / Piece, 4 Pieces 3 Lbs / Piece, 4 Pieces 4 Lbs / Piece, 4 Pieces 5 Lbs / Piece, 4 Pieces 3 25,000.00 75,000.00 23 Set Goniometers- Protractor Goniometer With 360 Degrees Coverage To Measure Joint And Compare The Changes In Joint Angles Material: Clear Plastic 3 Goniometer: 12-inch, 8 Inch And 6 Inch 3 600.00 1,800.00 24 Set Reflex Hammer-features: Pointed Babinski-style Tip Zinc Alloy Comfortable Handle Grip Control, Hammer For High Elastic Pvc Rubber Material: Zinc Alloy + Pvc; Color: Black Package Size: 27*11*3.5cm/10.6*4.3*1.3-inch Package Weight: 140g/4.9oz. 1 8,100.00 8,100.00 25 Piece Thermometer - Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. Material: Abs Plastic. Accuracy: (+/-)0.2°c. Auto-shutdown Time: About 18s Power Supply: 2 * 1.5v Aaa Batteries (not Included). 1 Year Warranty 5 1,600.00 8,000.00 26 Unit Multiple Mode Electrical Stimulator-1 Second Measuring Time. 3 Color Backlight Fever Reminders Auto Shut Off At 18 Seconds Store 50 Sets Of Data. Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. 3 9,884.00 29,652.00 27 Piece Foam Rolls- Material: Expanded Polypropylene Foam Item Weight: 0.42 Pounds Size: 18 Inches 3 4,000.00 12,000.00 28 Piece Mobilization Belts And Devices- Size 8 Feet Specific Uses For Product. Use For Legs, Hips, Arms, Back, Whole Body - High-quality Nylon Mobilization Belt Features A Plastic Side-release Buckle And Is Designed For Durability And Patient Safety. 5 2,850.00 14,250.00 29 Piece Gait Belt-1x Transfer Gait Belt Measurement Length: 60 Inches Width: 2 Inches 5 1,458.00 7,290.00 30 Set Theraband -4 Resistance Levels, Including Yellow, Red, Green, And Blue Supplied In Lay Flat Length Of 8", 12" And 18" Latex Rubber Weight Level: Yellow: 3 Lbs-4.3 Lbs Red: 3.7 Lbs-5.5 Lbs Green: 4.6 Lbs-6.7 Lbs Blue: 5.8 Lbs-8.6 Lbs 5 10,100.00 50,500.00 31 Piece Wedge Bolsters- A Firm And Breathable Bed Wedge Pillow Stays Cool, And Its Measurements Are 25″l X 25″w X 12″h Inches. / Breathable & Washable Cover / Designed To Provide Higher Body Support. 5 6,998.00 34,990.00 32 Piece Round Bolsters-weight：0-0.5 Kg Shape：column Feature：memory Filling：microfiber Material：100% Fiber Size:8" X 36" Color：white - Ideal For Hugging, Cylindrical Pillow, Great For Side Sleepers. 5 4,800.00 24,000.00 33 Piece Core Peak Bolsters- An All-purpose Positioning Aid • Provides Support Under The Legs, Arms, Feet, And Other Areas Of The Body. Fits Standard Treatment Tables • 18" In Length With At Least 6" In Diameter. 5 9,006.00 45,030.00 34 Piece Round Bolsters-weight：0-0.5 Kg Shape：column Feature：memory Filling：microfiber Material：100% Fiber Size:8" X 36" Color：white - Ideal For Hugging, Cylindrical Pillow, Great For Side Sleepers. 5 1,500.00 7,500.00 35 Piece Core Peak Bolsters- An All-purpose Positioning Aid • Provides Support Under The Legs, Arms, Feet, And Other Areas Of The Body. Fits Standard Treatment Tables • 18" In Length With At Least 6" In Diameter. 4 1,100.00 4,400.00 36 Piece Walking Cane-adjustable Aluminum Cane With Wooden Handle, Anodized Finish And Rubber Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 5 1,320.00 6,600.00 37 Piece Quad Cane -stable Structure, Thickened Stainless Steel Material. Abs Non-slip Handle, Ergonomic Design, Comfortable Grip. Spring Button For Easy Height Adjustment. Firm Lock Hoops To Stabilize The Body. 4 2,740.00 10,960.00 38 Piece Wheelchair - Front Wheel Size: 6 Inches Expanded Size: 82 * 58 * 87cmseat Depth: 38cmrear Wheel Size: 16 Inches Back Height: 42cmfolded Size: 70 * 25 * 72cmhandrail Spacing: 55cmseat Width: 45cmnet Weight: 11kgnet Weight Of All Aluminum Alloy Frame: 11kg 10 5,600.00 56,000.00 39 Piece Pediatric Walker- Height-adjustable Frame Sizes. 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Foot-operating Locking Mechanism On Front Casters. Rubber Tire Design 5 13,200.00 66,000.00 40 Set Communication Boards. Measures 9"x7.5". Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut. 10 6,172.00 61,720.00 41 Set Dry Erase Sleeves. Reusable Dry Erase Pockets. Colors: Blue, Pink, Yellow, Red, Green, Purple. Size: 25.5*35.5cm(1pcs). Quantity: 12pcs Package Including: 6 X Dry Erase Pockets 6 Pens 10 796.00 7,960.00 42 Set Wind Up Toys. Category: Clockwork Engineering Road Roller Material: Plastic Size: 9.9*6.5*5.3(cm) Color: Three-color Random Hair Ages: 3+ 10 440.00 4,400.00 43 Set Wordless Picture Books. A Wordless Book About Dealing With Big Emotions Like Fear, Grief, Loss, Sadness, And Anger Hardcover | 36 Pages Product Dimension: Approx. W1cm X L22.2cm X H22.2cm Product Weight: Approx. .28kg 10 1,998.00 19,980.00 44 Piece File Folders. (black Or White) Model: Minimum Of 100 Pages Capacity Size: 310*235mm Suitable For School And Office Supply 10 280.00 2,800.00 45 Set Articulation Cards. Genre: Children's Learning & Education Sub-genre: Society & Culture Label: Scholastic Teaching Resources Language: English Publisher: Scholastic Teaching Resources 10 3,913.00 39,130.00 46 Set Basic Vocabulary Board. Each Unit Comes With: Flashcards Smash Mat Trace And Color Cut And Glue Flipbook Black And White Versions Of All Activities 10 10,150.00 101,500.00 47 Set Phonics Phones. Specifications - Each Pack Includes Two Durable Whisper Phones, One In Vibrant Blue And One In Eye-catching Red. 10 536.00 5,360.00 48 Piece Taekwondo Mats. Thickened 1 Meter X 1 Meter X 2 Cm Interlocking Mats. Color Blue. 30 1,750.00 52,500.00 49 Set Vestibular Balls- (3 Pieces) Material: Synthetic Material Size: 55.0 / 65.0 / 75.0 Cm. Weight: 1100.0 / 1400.0 / 1700.0 G. Color: Violet / Blue / Black 3 6,200.00 18,600.00 50 Unit Monkey Bar With Platform For Swing- Materials: 7/8-inch Plywood 3.5’x2, Washable Mat, 1/2-inch Braided Ropes, Stainless Steel Carabiners Dimensions: 47 X 27.5 Inches; Maximum Rope Length - 7 Feet, Weight Limit: 100 Kilos (free Installation) 1 42,000.00 42,000.00 51 Set Trampoline With Handrails 40-inch Jumping Surface Area, Handrail Adjusts From 28.5"" To 36.5""h 16lbs. Holds Up To 300 Lbs 2 11,580.00 23,160.00 52 Unit Tumble Barrels-inside Diameter: 18"-24”, Outside Diameter: 24", Weight: 250lbs. (free Installation) 1 40,695.00 40,695.00 53 Set Wall Bars- 6-hole Design Pull Up Bar. The Maximum Weight Is 200kg. Solid Steel Bar With Black Powder Coating To Prevent Rust And Corrosion And Prolong Service Life, With Soft Cushions. 2 2,598.00 5,196.00 54 Set Adl Board - 6 Colors, 6 Different Dressing Skills Training. A Quiet Skill Book Made Of Cardboard And Non- Woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds" 10 494.00 4,940.00 55 Unit Pediatric Walker - 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Total Height: 75-90cm Side Wheel Width: 70cm. Front And Rear Track Width: 75cm. Left And Right Wheel Track: 40cm Suitable Height: 85-120cm. Weight: About 12kg 4 17,998.00 71,992.00 56 Set Assessment Tool Set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio- Emotional (1 Copies Per Set) Like: Ravens Progressive Matrices Tests, Goodenough-draw A Person Test 2 48,000.00 96,000.00 57 Set Assessment Tool Set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio- Emotional (1 Copies Per Set) Like: Wechsler Intelligence Scales For Children (wisc-v) 2 48,000.00 96,000.00 58 Pcs Reading Stand - High-grade Steel (iron). Color: Black. Dimensions: 26 Cm X 21 Cm X 16 Cm (folded) Adjustability: Multiple Notches For Adjustable Height And Angle. 1 Rotary Page Clip To Hold Pages Securely. 10 1,050.00 10,500.00 59 Unit Braille Translator- Supports Translation Of Print (word, Html, Daisy And Others) To Braille For Over 130 Languages. Drives All Major Braille Embossers. (with 6 Months Warranty) 1 136,800.00 136,800.00 60 Unit Laptop 15.5" – 17" Monitor, Processor: Between 2.0- 2.8ghz 512gb Ssd, 8gb Ram (3 Mos. Warranty) 36 39,000.00 1,404,000.00 61 Cord Hdmi Cord 5 Meters 5 600.00 3,000.00 62 Cord Hdmi Cord 10 Meters 5 900.00 4,500.00 63 Set Connector Cord. Cord With Male Plug To Connect From Cellphone/ Laptop To Sound Systems Microphone Port. 5 500.00 2,500.00 64 Unit Augmentative Communication Systems. Package Dimensions 9.13 X 3.03 X 1.1 Inches Batteries 2 Aaa Batteries Required. (included) Preprogrammed Commands Wide Variety- Travel Bag- Aac Device 10 3,702.00 37,020.00 65 Unit Call Lights. Receiver Working Voltage: 110-260v Transmitter Battery: 12v 23a Alkaline Battery Working Distance: 1000 Feet In Open Area. [packing List]. 3 Receivers 2 Transmitters. 2 X Double-sided Tape. 1 X User Manual. 2 X 12v 23a Batteries. 10 1,536.00 15,360.00 66 Unit External Hard Drive. 1tb External Hard Drive Usb 3.0 5 3,500.00 17,500.00 67 Unit Audio Voice Recorder. Built-in 375mah Battery, Specification: Recording Time: 512kbps， 32gb: About 144 Hours. Storage Media: Tf Card, 32gb, Battery Capacity: 375mah, Package Size: 15.2x7.8x3.7cm/5.9x3x1.4in, Package Weight: 135g – 140g/4.7oz 10 2,674.00 26,740.00 68 Unit Portable Reading Camera -macro Focus Range 10 Cm Shooting Modes Easy, Macro, Automatic Exposure Control Type Automatic Color; White Video Capture Resolution; 1080p, 2448p 5 10,260.00 51,300.00 69 Unit Laser Printer. Computer Printers Using Powder - Based For Swell Paper. 2 20,000.00 40,000.00 70 Unit 3 In Printer - Print, Scan, Copy, Fax With Adf, Flatbed Color Image Scanner, A4, Ltr, 8.5 X 13’, Folio 9 19,080.00 171,720.00 71 Unit Projector -5,000 Ansi Lumens (standard). Wxga 1,280 X 800) Dlp Type Projector. With Built-in Speaker X 16,000 Hours (standard), 10,000 Hours (eco), 15,000 Hours (extreme Eco) Lamp Life Wireless Projection Hdmi Cable, Bag 2 Years Warranty" 1 25,000.00 25,000.00 72 Unit Projection Screen. Specs: 120 Inch Projector Screen With Tripod Stand Home Outdoor Screens Cinema Portable 1 6,490.00 6,490.00 73 Pcs Calculator. Basic Calculator Big Calculator. Office Supplies. Dimension: 160.4x164.5x44.2mm. Color White. Dual Power Supply. Aaa Battery With Solar Panel. Inner Concave Buttons. 5 500.00 2,500.00 74 Unit Touch Screen Tv – Not Less Than 55" Android Tv (free Installation) 1-year Service Warranty 1 61,000.00 61,000.00 75 Pcs Cork Bulletin Board (20x30cm Cork Board With Black Wooden Frame) 1 430.00 430.00 76 Pcs Convertible Drawing And Drafting Table (manual Lift Dimension W-7.75 X D 24x H22" To 31.5") 3 8,400.00 25,200.00 77 Pcs Table. Desk Painting Easel (wooden Easel Stand For Painting 1.75m Complimentary Screws Firm And Strong) 5 454.00 2,270.00 78 Pcs Gauze Bandage (sterile Gauze Bandage 3x10 Per Box) 2 300.00 600.00 79 Pcs Povidine-iodine 120ml (antiseptic Wound Solution) 5 250.00 1,250.00 80 Pcs Artist Taboret (35 ½" H X 17 ½" W X 14 ½" D+9/cm X 44cm X 37 Cm 1 26,784.00 26,784.00 81 Pcs Medicine Cabinet Large. Dimension: 29 X16.5x16 Cm 2 1,500.00 3,000.00 82 Pcs Sewing Machine (zigzagger) Power：90w, Rated Voltage：220v, Number Of Stiches：23, Automatic Winding. Presser Foot Pressure Adjustable (free Installation) 1 25,000.00 25,000.00 83 Pcs Sewing Machine (electric) (portable Sewing Machine With 23 Stitches (free Installation) 2 15,000.00 30,000.00 84 Pcs Tailors’ Scissors (10") Heavy Duty 5 1,500.00 7,500.00 85 Pcs Glue Gun (20w High Temperature) 5 111.00 555.00 86 Pcs Acrylic Color (set 12 Pc X 12 Ml) 5 368.00 1,840.00 87 Pcs Scissors, 5" Blunted Scissors, Plastic Handle. 5 112.00 560.00 88 Pcs Cutters. Snap Off Blade Knife Blade, Refill 9 Mm 5 13.00 65.00 89 Pcs Watercolors (50 Color Solid Watercolors Tin Box (202'82'33mm) 5 441.00 2,205.00 90 Pcs Art Paper (assorted Colors, Short Size) 5 270.00 1,350.00 91 Pcs Paint Brushes (12 Pcs Fine Detail Paint Brush) 5 246.00 1,230.00 92 Pcs Yarn (yarn Hand Knitting And Crochet Single Color (5 Colors) 5 30.00 150.00 93 Pcs Glue (1 Bottle 240g) 5 126.00 630.00 94 Pcs Colored Pencils (colored Pencils 12/set) 5 190.00 950.00 95 Pcs Colored Pens (fine Line Colored Marker 24 Colors In Pvc Bag) 5 90.00 450.00 96 Pcs Sewing Pins (sewing Pins 40 Pcs/set0 5 10.00 50.00 97 Pcs Sewing Needles(hand) (sewing Needles Big And Small) 5 18.00 90.00 98 Pcs Rotary Cutter (45mm) 5 169.00 845.00 99 Pcs Tape Measure (body Tape Measuring Ruler Tailoring) 5 16.00 80.00 100 Pcs Crochet Hooks (100 Pcs Crochet Hook) 5 286.00 1,430.00 101 Pcs Knitting Needles (2 Pcs/set (35cm) Knitting Sweater Stick Needle Bamboo Sweater Needle Knitting Scarf Tool) 5 144.00 720.00 102 Pcs Crochet Thread (thread Yarn 175 M) 5 46.00 230.00 103 Pcs Sewing Thread (polyester 1000 M) 5 42.00 210.00 104 Pcs Painting Easel. Studio/ (90/150 Cm Easel Wooden Standard Painting Display) 5 569.00 2,845.00 105 Pcs Manual Pencil Sharpener (one -hole Sharpener Tub) 5 68.00 340.00 106 Pcs Doll Mannequin. Whole Body With Stand Decor Body Dress Full Body Display 5 411.00 2,055.00 107 Pcs Transparent Edge T- Square (hand Tool Inch Metric Ruler 6") 5 535.00 2,675.00 108 Pcs Wood Carving Set. Carpentry Tools (professional 12/set Manual Wood Carving) 5 1,670.00 8,350.00 109 Pcs Staple Gun. (gun Tacker/ Staple Gun Length-18cm Width -12cm H-3cm, Color- Silver Head T50) 5 226.00 1,130.00 110 Pcs Slope Sink. (single Bowl Stainless Steel Kitchen Sink Box 15" Single Bowl Kitchen Sink Sus 304) 5 21,892.00 109,460.00 111 Pcs Roofing Square. Dual Marking Right Angle Picture Framing Carpenter Ruler (wadlow Stainless Steel Angle Ruler Aluminum Alloy Body Heavy Duty Tool) 5 216.00 1,080.00 112 Pcs Professional Compound Mitre Box & Saw (mitre Box And Box Saw Set 12 Inch) Miter Box Will Handle Stock 7 1/4" High, 8" Wide At 90°, And 5" Wide At 45°. The Saw Can Be Set At Any Angle And Has Automatic Stops For 90°, 45°, And For 5, 6, 8 And 12-sided Frames. 1 1,510.00 1,510.00 113 Pcs Drawing Lamp (metal Adjustable Arm Work Desk Lamp) 5 373.00 1,865.00 114 Pcs Chisel Rack For Wood Carving (professional 12-piece Wood Carving Chisel Set With Black Case Sharp Hand Tools For Beginners) 5 1,299.00 6,495.00 115 Pcs Corner Clamp (90-degree Single Swing Jaw Corer Clamp 68 Mm) 5 258.00 1,290.00 116 Pcs Decorative Realistic Artificial Fruits (realistic Artificial Fruit Such As Apples, Orange, Lemon, Pineapple And Banana) 5 293.00 1,465.00 117 Pcs Geometric Shapes Set (wooden Montessori Learning Geometric Building Blocks) 5 1,176.00 5,880.00 118 Pcs Geometric Designer Templates (multi -functional Geometric Ruler) 5 118.00 590.00 119 Pcs Stack Rack (toy Origami Rack Shelves) 5 1,477.00 7,385.00 120 Pcs Picture Frame And Miter Clamp (90 Degree Right Angle Clip Picture Frame) 5 710.00 3,550.00 121 Pcs Heat Gun (heat Gun With Accessories 2000 W) 5 1,725.00 8,625.00 122 Pcs Tape Dispenser (tape Dispenser 1") 5 114.00 570.00 123 Pcs Multi- Function Three - Hole Puncher (multi-dimensional 3 -hole Puncher) 5 4,176.00 20,880.00 124 Pcs Metric Scale (technical Triangular Scale. Set Of 45, 90 Degrees) 5 68.00 340.00 125 Pcs Steel Tape Measure (tape Measure 8m/20) 5 470.00 2,350.00 126 Pcs Heavy Duty Circular Saw (7-¼" 1600w) 5 4,104.00 20,520.00 127 Pcs Abrasive Disc Cutter Machine (ssc22 14-inch Cut Off Saw Machine 2200w) 5 7,577.00 37,885.00 128 Pcs Manual Canvas Pliers (industry Line Combination Plier Insulated Pliers) 5 416.00 2,080.00 129 Pcs Jet-bow Beam Compass Drawing Set. The Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 5 1,169.00 5,845.00 130 Pcs Human Head Model(2 Pack 17" Foam Head Female Wig Head 5 4,791.00 23,955.00 131 Pcs Screw Drivers Set( 9 Pcs Multi-purpose Magnetic Screwdriver Set 5 226.00 1,130.00 132 Pcs Pliers. Pliers And Grip Set (premium 4 Pcs Insulated Pliers Set) 5 2,904.00 14,520.00 133 Pcs Artist Stool With Wheels (stainless Steel Stool Bar) 5 1,991.00 9,955.00 134 Pcs Screen Print Squeegee (curved Aluminum Handle Squeegee 75) 5 308.00 1,540.00 135 Pcs Mixing Paint Palette (paint Mixing Palette 10 Well Plastic) 5 45.00 225.00 136 Pcs Carving Chisels For Wood (wood Chisel 4 Pcs/set) 5 798.00 3,990.00 137 Pcs Files Set For Wood Carving, Craft Metal, And Glass Stone (10-piece Needle File Set For Jewelries) 5 191.00 955.00 138 Pcs Heavy Duty Multi- Purpose Bench Vise (8") Mounted On A Steel Platform. 2 15,000.00 30,000.00 139 Pcs Anvil (15 Kg) With Steel Mounting Platform 2 12,000.00 24,000.00 140 Unit Electric Angle Grinder. Heavy Duty 4" 1000w Professional Power Tools Grinders Variable-speed 3 2,500.00 7,500.00 141 Box Cutting Disc For Steel. Ultra-thin Cutting Disc 4 (25pcs) For Stainless 5 2,000.00 10,000.00 142 Pcs Cutting Discs For Masonry. 4”-inch Professional Diamond Cutting Disc Continuous Eco For Tile / Ceramic 20 300.00 6,000.00 143 Set Drill Bits.3-12mm Multifunctional Triangle Glass Metal Drill Bit Set Diamond Ceramic Tile Concrete Brick Wood Punching Hole Drill Bits 5 500.00 2,500.00 144 Set Drill Bits. 13pc Cobalt High Speed Steel Twist Drill Bit Set 1.5mm-6.5mm For Drilling Metal Wood Stainless Steel 5 500.00 2,500.00 145 Set Drill Bits For Wood. 7pc X Long Wood Drill Bit Set 4mm 5mm 6mm 7mm 8mm 10mm 12mm X 300mm Brad Point Auger Drill Bits Wood 5 500.00 2,500.00 146 Set Electric Wood Power Planer. Wood Planer For Woodworking. 1200 Watts. 1300 Rpm. 50 Hz. 80mm Wide. With Accessories. With Warranty 3 3,000.00 9,000.00 147 Unit Impact Drill 13mm Hammer Electric Drill Heavy Duty 220v Household Power Tools Industrial Screwdriver. 7.5 Amp Copper Motor, 700w, 3300rpm. With Warranty 3 3,000.00 9,000.00 148 Box Welding Rod Special N-6013 (2.5) (3/32 X 13”) 10kg Per Box 4 2,500.00 10,000.00 149 Unit Electric Welding Machine. Portable Igbt Inverter Welding Machine (dc Inverter Welding) With Accessories. With 3 Mos. Warranty 3 5,000.00 15,000.00 150 Pcs Welding Protective Suite (genuine Whole Leader Welding Apron) 5 2,362.00 11,810.00 151 Pcs Welding Hood Cape (standard Size) 5 311.00 1,555.00 152 Pcs Welding Gloves 5 186.00 930.00 153 Pcs Welding Protective Visor Glasses, Standard 5 420.00 2,100.00 154 Pcs Welding Mask (welding Helmet Auto Darkening Adjustable) 5 465.60 2,328.00 155 Pcs Hard Hat (heavy Duty Safety Helmet With Chin Strap) 5 291.00 1,455.00 156 Pcs Compact Electric Kilns (quick Fire A Kiln Controller) 2 39,305.00 78,610.00 157 Pcs Heat Press Transfer Machine (multi-function Heat Press Machine Flatbed: 30 Cm X 38 Cm) 2 11,808.00 23,616.00 158 Pcs Hammer For Carpentry. Claw Hammer /16oz 5 300.00 1,500.00 159 Set Hacksaw Frame With Blade For Metal 12" 300mm Heavy Duty 5 350.00 1,750.00 160 Pcs Wooden Hand Saw. 18" High Quality Metal Blade With Plastic And Rubber Handle 5 350.00 1,750.00 161 Pcs Steel Measuring Tape. Fluorescerous Tape 10m Portable Self Lock Tape Measure Meter Tape Tools 5 350.00 1,750.00 162 Pcs Tri Square. High Quality Metal Frame 12" With Clear Markings 5 750.00 3,750.00 163 Pcs Level Bar. Aluminum Level Bar With Magnet Heavy Duty 80cm 2 2,000.00 4,000.00 164 Pcs Plumb Bob / Hulog. With String 350g 5 250.00 1,250.00 165 Set Rachet. Combination Wrench Steel Chrome Vanadium 8-24mm (per Piece) 5 500.00 2,500.00 166 Set Ratchet Wrench. 12pcs 1/2 1/4-inch Drive Ratchet Wrench Cr-v Socket Kits Mechanic Spanner Car Motorcycle Repair Tool 5 700.00 3,500.00 167 Pcs Adjustable Wrench. Industrial Adjustable Wrench (12") 300mm Made Of High-quality Steel. 5 350.00 1,750.00 168 Set Back Wrench. Set Of Heavy-duty Double Ring Spanner Wrench (metric 28mm - 32mm) Cr-v 5 500.00 2,500.00 169 Set Combination Wrench Tool Set 16pcs (8-32mm Professional Dual Purpose 5 700.00 3,500.00 170 Set Magnetic Screwdriver Set Professional Cushion Grip 5 Flat Head And 4 Phillips Tips Screwdriver Non-slip 5 1,000.00 5,000.00 171 Set Allen Wrench. Short Arm Hex Allen Key Set With Carbon Steel Material. (1.5 To 6 Mm 7 Pcs Set) 5 100.00 500.00 172 Set Heavy Duty Pliers. 8"standard Pliers Cutter Longnose Combinations 8"pliers 5 500.00 2,500.00 173 Pcs Water Pipe Wrench 18” Liyabe Tubo Yabe Hand Tools 5 500.00 2,500.00 174 Set Chisel For Wood. 90 Mm Wooden Handle. 12pcs Professional Manual Wood Carving Hand Chisel Carving Tool Set, 8mm-14 Mm High Quality Steel Blade. 5 900.00 4,500.00 175 Set Wood Planer Set -katam. Locally Manufactured 8 Inches 2 500.00 1,000.00 176 Pcs Rubber Mallet (16 Oz) 5 258.00 1,290.00 177 Pcs Ball Peen Hammer (½ Lb. (80 Oz) 5 376.00 1,880.00 178 Pcs Cutting Mat 6680412 5 268.00 1,340.00 179 Pcs Heavy Duty Extension Wire (10-meter Wire: 162 C, Plug: 15a, 25 V, Maximum Wattage:3750 W., At Least 4 Outlets) 5 900.00 4,500.00 180 Set Microphone With 5-meter Cord, Anti-interference, Anti-whistling. 2 1,500.00 3,000.00 181 Pcs Portable Sound System With Microphone ( Active Portable Trolley Speaker , 600w Max Power, Bluetooth + Tws, Usb & Sd Playback, Fm Radio, Line-in & Line -out, 2 Guitar Input, 2 Wired Mic Input, 180 Channels, Mic Priority, High Quality Lead Acid 12ah Battery, 12 Dc Input, Dimensions: (l) 36.5cm (w) 40 Cm (h) 67.5 Cm, 2 Fee Wireless Mic) 2 20,000.00 40,000.00 182 Pcs Camera Flash. 92 Ft./28 M) 2 13,800.00 27,600.00 183 Pcs Camera Lens (18-200mm F/3.5-5.6 Lens 2 40,336.00 80,672.00 184 Pcs Camera Tripod (aluminum Tripod Digital Camera Tripod Mobile Phone Selfie Stands) 2 2,500.00 5,000.00 185 Pcs Studio Lights (soft Light) 4 10,200.00 40,800.00 186 Hdmi Cord. Hdmi Male To Male Cable Hd104 10110 10 Meter. 4k/60hz 2 1,500.00 3,000.00 187 Hdmi Cord. 5 Meters. Two-color Injection Plug Double Shielded Cable Body. Hdmi2.0 Version. Resolution: 0.75m-3m Support 4k 60hz; 5m Support 4k 30hz Only. Awg:30awg (0.75m-5m) 5 600.00 3,000.00 188 Pcs Soft Box Stand And Reflector Holder (50x70 Cm Soft Box Lighting Kit) 2 442.00 884.00 189 Pcs Monolights (200 W) 2 3,931.00 7,862.00 190 Pcs Reflector With Holder (holder /arm Stand Kit) 2 2,891.00 5,782.00 191 Pcs Boom Light Stand And Reflector Holder (420 Lb. Light Boom Stand With Weight Bag Up To 5kg Maximum Lead Capacity) 3 5,508.00 16,524.00 192 Pcs Background (4.22 M Background Paper 1.36 X 10m) 3 1,438.00 4,314.00 193 Pcs Display Panel Board (display Parallel Board) 1 14,290.00 14,290.00 194 Pcs Offline Mini Compressor (air Compressor Kwv550 9l Oil Less 3 4,558.00 13,674.00 195 Pcs Styrofoam Cutter (electric Foam Cutter Hot Wire Pen Portable) 5 238.00 1,190.00 196 Pcs Potter's Wheel/ Electric Potter's Wheel / Cutter (220 Volts Pottery Wheel) 1 6,228.00 6,228.00 197 Pcs Fire Blanket (with Pvc Pouch 1.2m X 1.2 M) 3 624.00 1,872.00 198 Pcs Smoke Detector X-sense Xs01 Mini Smoke Detector- Stand Alone 3 1,799.00 5,397.00 199 Pcs Disposal Bins (trash Bins 75 L) 3 1,804.00 5,412.00 200 Pcs Dressing Mirror (whole Body Mirror With 4 Wheels Height 5ft. Width 14 Inches) 1 1,500.00 1,500.00 201 Pcs Dish Towels (10 Pc. Per Set 25 Cm X 25 Cm Microfiber Super Absorbent) 10 993.00 9,930.00 202 Pcs Steamer. 3 Layer Steamer 32cm Stainless Steel Cooking Pots Cookware Steam High Quality 3 1,156.00 3,468.00 203 Pcs Soap Dish (dual Soap Case With Cover & Handle- Bathroom Soap Dish / Soap Case) 50 70.00 3,500.00 204 Pcs Detergent (detergent Powder Set 6 Kilos-i Kilo X 6 Pouches) 50 288.00 14,400.00 205 Pcs Hand Soap (liquid Hand Soap Antibac 1 Gallon) 50 216.00 10,800.00 206 Pcs Pots (extra Size #4 (26cm Diameter 16 Cm In Height) 20 673.00 13,460.00 207 Pcs Pans (nonstick) 5 194.00 970.00 208 Pcs Toilet Paper Holder (wall Mounted Bathroom Toilet Paper Holder Tissue) 2 238.00 476.00 209 Pcs Dipper (plastic Dipper L 11" X W 36"x H 41" 2 15.00 30.00 210 Pcs Pail (utility Pail With Metal Handle 10l/26x27 Cm) 2 111.00 222.00 211 Pcs Trash Can (with Plastic Swing Lid L-27 Cm, W- 17.5cm, H- 40.5 Cm) 2 260.00 520.00 212 Pcs Toothbrush (extra Clean Toothbrush 5 Pk -soft) 20 182.00 3,640.00 213 Pcs Hairbrush (natural Wood Hairbrush Comb) 20 120.00 2,400.00 214 Pcs Comb (1 Dozen Suklay 3-hole X Sz-28 Big) 20 90.00 1,800.00 215 Pcs Toothpaste (red 100 Ml) 20 60.00 1,200.00 216 Pcs Plastic Tumbler 20 300.00 6,000.00 217 Pcs Razor (twin Blade Disposable Razors) 20 120.00 2,400.00 218 Pcs Nail Clipper (stainless Nail Clippers H-8 Cm Wt-0.046 Kg) 20 100.00 2,000.00 219 Pcs Nail File (12 Pcs Red Nail File (medium) 20 50.00 1,000.00 220 Pcs Deodorant (roll On 50 Ml Bottle) 20 150.00 3,000.00 221 Pcs Face Towel (basic Face Towel - Free Size) 20 100.00 2,000.00 222 Pcs Feminine Napkin (silk Floss 12 Pcs) 200 50.00 10,000.00 223 Pcs Dust Catcher With Broom (2n1 Broom Dustpan Set Windproof Floor Sweeper With Broom) 5 170.00 850.00 224 Pcs Feather Duster (soft Magic Feather Duster Long Size And Colorful Colors (plastic) 5 150.00 750.00 225 Pcs Wash Rags (round Rags) 5 30.00 150.00 226 Pcs Floor Map (magic Spin Mop With Bucket 360° Rotating Floor Cleaning Plastic Liner) 5 264.00 1,320.00 227 Pcs Garbage Can (super Convenient Mini Flip Lid Trash Can (plastic) 10 150.00 1,500.00 228 Pcs Sponge (high Density Double-sided Dishwashing Sponge 7x10x3 Cm) 10 30.00 300.00 229 Pcs Spray Bottle (garden Sprayer Capacity: 500ml) 10 170.00 1,700.00 230 Pcs Table Napkin (1 Ply 40s Sheets Folded) 10 21.00 210.00 231 Pcs Place Mat (table Placemat Pvc Anti-slip Placemat Washable Durable Kitchen S:30x45cm) 10 25.00 250.00 232 Dozen Plates (12 Pcs Plates 8-inch Melamine White) 6 358.00 2,148.00 233 Set Drinking Glass (drinking Glass 10 Oz Tall Clear Tumblers Set Of 6 L=5.5cm H-12 Cm) 6 510.00 3,060.00 234 Pcs Pitcher (durable Crystal-clear Glass 1.5l) 6 258.00 1,548.00 235 Pcs Bowl (serving Bowls, Clear Glass 20 Cm Diameter) 6 72.00 432.00 236 Pcs Water Dispenser. Hot And Cold Water/drinking Household Multifunctional Top Loading. Stainless Steel Casing Color White. Dimension: 85x29x29 Cm. Large Bottom Locker. 3 3,000.00 9,000.00 237 Pcs Electric Hand Drier (free Installation) 1 5,000.00 5,000.00 238 Pcs Water Pail. (utility Pail With Metal Handle 10l Color: Red/ Blue L-27cm, W-27cm, H-26 Cm 6 335.00 2,010.00 239 Bot Dish Washing Liquid. Kalamansi Lemon Antibac Hygiene 780ml Bottle 10 350.00 3,500.00 240 Pack Laundry Powder Soap. 5 Kg Supra Clean, Natural Scent 10 600.00 6,000.00 241 Pcs Laundry Bar Soap (scrubber Bar 125g) 120 18.00 2,160.00 242 Pcs Clothesline (1 Pc Nonslip Clothesline 35 M) 20 10.80 216.00 243 Pcs Clothes Pin (laundry Clothes Pins Spring Clips 24 Pcs Plastic) 20 48.00 960.00 244 Pcs Wash Basin (laundry Basin 23 Inch) 10 504.00 5,040.00 245 Pcs Laundry Bag Set (4 Pcs/set Laundry Washing Bag- 1 Pc M(30cmx40cm) 1pc L (40cmx50cm) 1pc Xl (50x60 Cm) 10 150.00 1,500.00 246 Pcs Ironing Board (ironing Board With Stand Portable 43"iron Board (70cm To 86 Cm) 5 1,300.00 6,500.00 247 Pcs Flat Iron (non-stick Teflon Saleplate Spray Function Ht & Width 251x170x120mm 5 870.00 4,350.00 248 Pcs Mono Bock Chair, Standard Size. White. Load Capacity 200kg. 20 600.00 12,000.00 249 Pcs Curtain Rod (steel +anti-rust Coating, Adjustable Size: Large 120 Inches) 10 1,200.00 12,000.00 250 Pcs Curtain (1pc 5x7 Ft. Window Curtain With 8-hole Grommet Rings For Bedroom And Living Room) 10 714.00 7,140.00 251 Dozen Hangers (12 Pcs. Plastic Hanger) 2 150.00 300.00 252 Pcs Washing Machine. 7.0 Kg Digital Inverter Fully Automatic Top Load Washing Machine (water Level: 5, Gross Weight: 31kg, Net Weight: 27 Kg Gross Dimension: (wxhxd)=580x890x600mm Net Dimension: (wxhxd)= 540x857x568mm) 2 20,000.00 40,000.00 253 Pcs Vacuum Cleaner (heavy Duty Gas 12-25 Pl Wet And Dry Vacuum Cleaner/ Extractor With Power Socket System 1,250 W Weight-9kg, Max Input Power- 1,250 W, Max Vacuum Power-200 Mbar) 5 11,547.00 57,735.00 254 Pcs Socks (cotton Socks Unisex High Street Socks Sixe:38-44 2 50.00 100.00 255 Pcs Dress (sleeve Ruffle Hem Plain Elegant) 1 500.00 500.00 256 Pcs Slippers (sizes 10, Flipflop Brand Light Weight And Durable 2 132.00 264.00 257 Pcs Mattress (for Single Size Bed Size Polyester 3.5 Inch Thick 6 4,440.00 26,640.00 258 Bed Foam (for Single Bed, 3 Inches Thick) 3 3,500.00 10,500.00 259 Pcs Pillows (foam Pillow 4x12x20) 3 426.00 1,278.00 260 Pcs Bedsheets (cotton Full Garterize 3n1 Bed Sheets, L-60in Ww-75in (for Single Bed Size) 3 300.00 900.00 261 Pcs Alarm Clock (3-inch Retro Mute Quartz Bell Alarm Clock Movement Bedside With Night Light And Loud Alarm) 1 450.00 450.00 262 Pcs Handheld Rechargeable Pool Vacuum. • Strong Built-in 4v 2ah Ni-mh Rechargeable Batteries • Suitable For Use With All Purespas And Above Ground Pools Up To 18 Feet Or 5.49 Meters In Diameter • 0.21 Gal (0.8 Liters) Quick Release Transparent Debris Container • 12 Gal/min. (45 Liters/minute) Water Suction For Efficient Debris Collection • 94 Inches (2.39m) Lightweight Telescoping Aluminum Pole • Two Interchangeable Brush Heads • Automatic Shut-off Feature When Vacuum Is Not Submerged In Water • Ipx8 Waterproof Switch For Added Protection • 5-6 Hour Charge Time / 50 Minutes Maximum Running Time • Usb Charging Cable Included For Convenient Recharging (plug Not Included) 3 9,998.00 29,994.00 263 Pcs Swimming Pool Leaf Skimmer. Purpose: Used For Cleaning Swimming Pool And Salvaging Pool Water Garbage. Material: Pp Plastic. Size: 420*280*30mm/16.54*11.02*1.18". 5 376.00 1,880.00 264 Pcs Pack Of 300 Pcs Chlorine Tablet For Swimming Pool. Adjustable Chlorine Dispenser 8 Inchin Combination With Mont, 3-inch Chlorine Tablets Adjust The Water Flow Rate And Hereby The Amount Of Chlorine Dissolved In Your Pool Package Included:1*chlorine Dispenser +300pcs Pool Cleaning Tablet Or 300pcs Pool Cleaning Tablet 20 500.00 10,000.00 265 Pcs Adaptive Swim Life Jacket For Disabled. Keeps The User’s Face Out Of The Water. Stops The Tension Of The Neck. Upright Position. Back Support. Therapist Hands Free! Double Harness Distributes Tension’s Adjustment. Possibility To Add The Harness Pad (or “cuissard” In French) No Latex. 5 11,000.00 55,000.00 266 Pcs Bakery Display Rack (estante). Made Of Glass And Aluminum Frame. 4 Layer Of Glass (transparent) Or Acrylic With Partition. Rubber Wheels With Lock. At Least 2ftx 5ftx 4 Ft 2 40,000.00 80,000.00 267 Pcs Bread Rack. Made Of 12 Mm Steel. 24"x5ftx5ft. Can Hold Up To 10 Trays (lagayan Ng Plantsa Ng Tinapay) 2 10,000.00 20,000.00 268 Pcs Cookery Cabinets (made With Carbon Steel 5 Layers, Size: H: 144cm, W: 55cm) 3 3,621.00 10,863.00 269 Set Housekeeping Cart. Multi-functional Movable Cleaning Cart Housekeeping Property Cleaning Tool Cart Special Trolley. Standard For Housekeeping Work. 5 5,000.00 25,000.00 270 Set Shopping Cart Utility Cart Trolley Grocery Cart For Warehouse Garden Supermarket 5 6,000.00 30,000.00 271 Pcs Kitchen Carts (2 Layer Stainless Steel Carts With Two Brake Wheels; Size: 400mm X 500mm X 860mm) 2 3,019.00 6,038.00 272 Pcs Weighing Scale Digital. Display Mode: Led/lcd+light. Weighing Range :40kg. Accuracy: 2g. Product Size: 35x33x14cm 3 Lcd Display On The Operator’s Side Of The Scale As Well As 3 Lcd Display On The Customer’s Side. Minimum Capacity Is 2g. Maximum Capacity Is 40kg Power Source: Built In Rechargeable Battery With Usb Cable Battery Powered Or Connect Usb Cable. Battery Powered Or Connect Usb Cable To Use Weight Platform/tray Material Is Stainless Steel. 4 7,000.00 28,000.00 273 Pcs Measuring Cup. Measuring Cup Sizes: 1 Cup (250ml). 1/2 Cup (125ml). 1/4 Cup (60ml); 1/8 Cup (30ml). Materials. Plastic (abs) 6 500.00 3,000.00 274 Pcs Measuring Spoon 1tbsp 15ml 1/2tbsp 7.5ml Ltsp 5ml 1/2tsp 2.5mlmaterial: Stainless Steel+pp Packing: Pp Bag 6 400.00 2,400.00 275 Pcs Measuring Urn - Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 6 450.00 2,700.00 276 Pcs Wire Whisk - Length: 30 Cm (12 ") Material Stainless Steel 6 320.00 1,920.00 277 Pcs Chef's Knife (stainless Steel) 33cm X 4.5cm X 2cm 6 750.00 4,500.00 278 Pcs Boning Knife (stainless Steel) 24.4cm X 1.9cm X 1.7cm 6 492.00 2,952.00 279 Pcs Oysters Knife (stainless Steel) 15.5com X 6.5cm X 3cm 6 187.00 1,122.00 280 Pcs Cleaver Knife (stainless Steel) 7 Inches Or 2.5mm 6 1,074.00 6,444.00 281 Pcs Tenderizer (pin Tenderizer) Stainless Steel Diameter: 5cm, Height: 19cm 6 119.00 714.00 282 Pcs Tenderizer Mallet. (tenderizer) Stainless Steel 12.6 Inches X 11.5x4cm 6 240.00 1,440.00 283 Pcs Skimmer, Fine (stainless Steel) 7.3cm X 5cm X 21.5cm 6 160.00 960.00 284 Pcs Wire Skimmer, Small (stainless Steel) Handle: 14; Radius: 14 6 105.00 630.00 285 Pcs Skimmers, Spider (stainless Steel) Handle: 14; Radius: 20 6 115.00 690.00 286 Pcs Strainer, Small, Fine (stainless Steel) Diameter:14cm; Length: 29cm; Depth: 5.5cm 6 160.00 960.00 287 Pcs Colander Strainer (stainless Steel) 48cm X 20cm X 12cm 6 298.00 1,788.00 288 Pcs Siever, Small (stainless Steel) 14 Cm 6 188.00 1,128.00 289 Pcs Strainer, Medium, Fine (stainless Steel) Diameter:16cm; Length: 30.5cm; Depth: 5.9cm 6 180.00 1,080.00 290 Pcs Turner (stainless) Dimension: 34.5 X 9.8 X 4.4 Cm 6 280.00 1,680.00 291 Pcs Spatula (silicon) 27.2 X 5.5 X 1.5cm 6 169.00 1,014.00 292 Pcs Wooden Spoon (made With Beech Wood 10cm X 34cm X 2cm) 6 244.00 1,464.00 293 Pcs Parisienne Scoop (stainless Steel Blade With Plastic Handle) Scoop Diameter: 30mm And 27mm; Total Length: 170mm 6 216.00 1,296.00 294 Pcs Fruit Juicer, Standard Type 6 1,500.00 9,000.00 295 Pcs Zester (stainless Steel) Length: 30cm/11.81 Inches 8 268.00 2,144.00 296 Pcs Piping Bag (disposable Bag Size: 24.5cm X 17cm 8 208.00 1,664.00 297 Pcs Pastry Tubes (stainless Steel) 3cm X 3cm X 6.1cm 8 142.00 1,136.00 298 Pcs Strainer, Chinois, Small (stainless Steel) 16cm Handle: 5.5inches 8 198.00 1,584.00 299 Pcs Filling Funnel (stainless Steel) Upper Diameter: 10.5cm, Lower Diameter: 3.7cm, Height: 4.5cm 4 212.00 848.00 300 Pcs Measuring Spoon (1set: 1tbsp, 1/2tbsp, 1tsp, 1/2tsp, 1/3tsp, 1/4tsp) 6 245.00 1,470.00 301 Pcs Tongs (stainless Steel) 9 Inches 10 110.00 1,100.00 302 Pcs Tongs (stainless Steel) 12 Inches 8 179.00 1,432.00 303 Pcs Ice Cream Scoop (stainless Steel) Diameter: 4.5cm, Length: 18cm 6 208.00 1,248.00 304 Pcs Cheese Cloth (made From Cotton) 101 X 270cm 10 223.00 2,230.00 305 Pcs Serving Spoon (heavy-duty Stainless Steel) Length: 22.5cm; Width: 6cm 24 102.00 2,448.00 306 Pcs Pepper And Salt Grinder (made With Stainless Steel, Glass And Ceramic) Approx. 19x6.5cm 6 296.00 1,776.00 307 Pcs Core Seed Remover (stainless Steel; Approx: 1.4x21.5cm) 8 229.00 1,832.00 308 Pcs Wire Whisk, Small (stainless Steel+plastic Handle; 8 Inches) 8 180.00 1,440.00 309 Pcs Wire Whisk, Medium (stainless Steel+plastic Handle; 10.2 Inches) 8 189.00 1,512.00 310 Pcs Wire Whisk, Heavy Duty (stainless Steel+plastic Handle; 14 Inches) 2 258.00 516.00 311 Pcs Can Opener (stainless Steel Blade; Length: 17cm High) 1 370.00 370.00 312 Pcs Muti-purpose Kitchen Scissors/ Shears (scissors Length: 21.5cm; Blade Length: 10cm; Handle Length: 11.5cm; Handle Width: 9.5cm; Blade Thickness: 0.4cm Weight: 200grams) 8 368.00 2,944.00 313 Pcs Soup Ladle, 4 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 8 124.00 992.00 314 Pcs Soup Ladle, 6 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 8 194.00 1,552.00 315 Pcs Soup Ladle, 8 Oz (stainless Steel And Wooden Handle: 10 X 51 Cm) 3 290.00 870.00 316 Pcs Soup Ladle, 12 Oz (stainless Steel And Wooden Handle: 15 X 51 Cm) 2 360.00 720.00 317 Pcs Kitchen Spoon (stainless Steel; Size: 8cmx6.5cmx21cm) 8 86.00 688.00 318 Pcs Kitchen Spoon, Slotted (material: Plastic; Size: 7x3x43cm) 8 289.00 2,312.00 319 Pcs Kitchen Fork (stainless Steel; Size: 7cmx4cmx21cm) 4 72.00 288.00 320 Pcs Carving Fork (stainless Steel; Size: 13 Inches Long) 3 162.00 486.00 321 Pcs Digital Kitchen Thermometer (cooking/food Temperature; Size 34mm X 270mm) 2 486.00 972.00 322 Pcs Muti-function Vegetable Fruit Peeler Slicer Cutter Chopper (material: Abs + Stainless Steel) 2 429.00 858.00 323 Pcs Stock Pot, Big (with Glass Cover; Size: 34.5 X 27.9 Cm X 16.6 Cm) 2 798.00 1,596.00 324 Pcs Frying Pan, Small (scratch Resistant And Non-stick; Size: 20cm) 4 233.00 932.00 325 Pcs Frying Pan, Medium (scratch Resistant And Non-stick; Size: 24cm) 4 380.00 1,520.00 326 Pcs Frying Pan, Large (scratch Resistant And Non-stick; Size: 28cm) 2 578.00 1,156.00 327 Pcs Colander, Small (stainless Steel; Size: 24cm X 22cm) 3 204.00 612.00 328 Pcs Colander, Medium (stainless Steel; Size: 28cm X 22cm) 2 298.00 596.00 329 Pcs Cutting Board (material: Bamboo; Size: 34x24x1.8cm/750g) 4 209.00 836.00 330 Pcs Heavy Duty Electric Grill Machine 2 10,000.00 20,000.00 331 Pcs Portable And Foldable Charcoal Barbeque Grill 25"x30"x27" 2 2,000.00 4,000.00 332 Unit Cotton Candy Machine, Power 950 Watts, Speed 3600 Rpm, Pre Heating Time 1 To 3 Minutes, 515 Mm Diameter Stainless Drum. 1 5,000.00 5,000.00 333 Pcs Fish Poacher, Medium (stainless Steel With Tempered Glass Cover; Size: 24cm X 38.7cm X 10cm) 1 983.00 983.00 334 Pcs Casserole, Small (stainless Steel: 2.1 Liter; Size: 12cm X 15cm) 6 599.00 3,594.00 335 Pcs Casserole, Medium (stainless Steel: 3.9 Liter; Size: 12.5cm X 20cm) 4 689.00 2,756.00 336 Pcs Wok, Small (nonstick Carbon Steel; Size: 32cm) 4 389.00 1,556.00 337 Pcs Wok, Medium (nonstick Carbon Steel; Size: 36cm) 1 401.00 401.00 338 Pcs Double Boiler, Medium (stainless Steel; Size: 27x14x6cm) 1 389.00 389.00 339 Pcs Paella (heavy Duty Carbon Steel; Size 25cm) 8 581.00 4,648.00 340 Pcs Glass Rack (plastic-coated Metal; Capacity: 24pcs Glass; Dimension: L:52cm; W: 36cm; H:8cm) 2 461.00 922.00 341 Pcs Soup Cup Rack (2 Layered Rack; Size: 35 X 25 X 28cm) 3 899.00 2,697.00 342 Pcs Plate Rack (stainless Steel; Size: 30cmx22.8cmx12.9cm) 2 492.00 984.00 343 Pcs Baking Tray, Small (stainless Steel; Size Details: 23cm X 17cm) 8 258.00 2,064.00 344 Pcs Utility Tray (stainless Steel: Stain Resistant; Size: 45cm X 35cm X 4.8cm) 12 189.00 2,268.00 345 Pcs Roasting Pan (stainless Steel; Size: 31.5 X 24.5 X 2.5 Cm) 4 378.00 1,512.00 346 Pcs Dish Towels (highly Absorbent Cloth With 3pcs Per Pack) 8 98.00 784.00 347 Pcs Cooler, 2.5ft X 2.5 Ft X 3ft Plastic, With Good Insulation 1 3,000.00 3,000.00 348 Pcs Plastic Silverware Or Real Silverware (stainless Steel; 18pcs Utensils Set Includes: 6 Dinner Fork, 6 Dinner Spoons And 6 Dinner Teaspoons) 2 415.00 830.00 349 Pcs Glasses. Dining Glasses (6pcs. Thick Clear Glass: W: 3inches And H: 4inches) 6 265.00 1,590.00 350 Pcs Teacups (ceramic White; Capacity: 250ml) 2 188.00 376.00 351 Pcs Small Plate / Saucers (ceramic With Size: 6 Inches And 6pcs Per Set) 6 140.00 840.00 352 Pcs Cabinet Dish Organizer (2 Layered Metal Dish; Size:41.5cm X 30cm X 47cm) 1 2,499.00 2,499.00 353 Pcs Sponge And Soap Holder For Kitchen (stainless Steel) 18x 10 X 9cm 3 418.00 1,254.00 354 Pcs 11-piece Pots/pans (stainless Steel) 1 5,158.00 5,158.00 355 Pcs Silicone Kitchenware Set. Composed Of Slotted Spoon 12". Soup Ladle 12". Solid Turner 12". Tongs 10". Whisk 9.5". Basting Brush 10.8". Pasta Server 12.5". Round Spatula 12". Spoon 12.5" Spatula 12.6" And Utensils Holder. 6 647.50 3,885.00 356 Pcs Rotary Eggbeater (stainless Steel) 31cm /12.2", W:9.5cm/3.74" 2 340.00 680.00 357 Pcs Dough Scraper (stainless Steel) 16x12x2cm 3 178.00 534.00 358 Pcs Gas Range And Oven (1 Turbo, 1 Large And 2 Medium Burners) 33x42x39.5, (49 Liters ) 1 46,162.00 46,162.00 359 Pcs Refrigerator (7 Cubic Feet, Stainless Look) Two Door Direct Cool 1 15,717.00 15,717.00 360 Pcs Kitchen Cupboards (7 Doors, 3 Drawers) 120x 40x90 Cm 2 13,198.00 26,396.00 361 Pcs Cooking Brush (silicone) Heat Resistant 3 82.00 246.00 362 Pcs Blender. (9 In1 Food Processor, Good For Chopping, Slicing,grating,shredding, Whisking)18x18x38cm 3 3,742.00 11,226.00 363 Pcs Mechanical Microwave Oven (countertop,20 Liters) 700w - 1200w 3 5,075.00 15,225.00 364 Pcs Kitchen Scale Food (manual) 5 Kilogram 2 252.00 504.00 365 Pcs Measuring Spoons (stainless Steel, 6pcs Heavy Duty) 3 258.00 774.00 366 Pcs Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 3 2,208.00 6,624.00 367 Pcs Kitchen Shears (stainless Steel) 9 Inches/ 225mm 3 357.00 1,071.00 368 Pcs Potato Masher With Soft Grip Handle (stainless Steel) 9.5x27x8cm 3 357.00 1,071.00 369 Pcs Medium Graters (stainless Steel) 18/8 3 430.00 1,290.00 370 Pcs Funnel (stainless Steel) 22x14.5cm 3 715.00 2,145.00 371 Pcs Can Opener (automatic) 16.3x 1.5cm 3 698.00 2,094.00 372 Pcs Cast Iron Pots And Pans (ceramic, Non-stick) 21.85x 13.19x12.80inch 3 7,180.00 21,540.00 373 Pcs Gas Stove. 2 Burner Built In Gas Stove ( Stainless Steel) 73x41x9cm With Hose And Safety Regulator. 5 3,640.00 18,200.00 374 Pcs Lpg Tank 11kg 6 5,000.00 30,000.00 375 Unit Electric Stove. Stainless Frame. Multifunctional Induction Cooker Inverter Electric Stove Heavy Duty Energy-saving 3500w 220v. All Copper Heating Coil. Five Speed Power Adjustment. Explosion Proof. With Digital Display Panel. 5 2,500.00 12,500.00 376 Pcs Double Broiler Steamer (stainless Steel) 30 Cm Diameter 3 2,730.00 8,190.00 377 Pcs Kitchen Knife Set (stainless Steel And Poly Propylene Plastic Handle) 15x7.5x34cm 3 840.00 2,520.00 378 Pcs Meat Slicer (electric Machine Stainless Steel) 418x 293x 325mm 3 2,494.00 7,482.00 379 Pcs Bread Toaster (stainless Steel Top Plate) 25x 14.6x16.8cm 3 1,059.00 3,177.00 380 Pcs Cookie Press (stainless Steel With 13 Disc And 8 Icing Tips 25x 14.5cm 3 462.00 1,386.00 381 Pcs Cake Decorating Kit. Piping Tips Set ( Stainless Steel, Multicolor) 3 279.00 837.00 382 Pcs Serving Bread Tray (stainless Steel) 45cmx2.8cm 6 1,229.00 7,374.00 383 Pcs Hot Plate Single Electric Stove (1000 W) 8.8x8.8x1.4 Inch 2 583.00 1,166.00 384 Pcs Electric Oven. Height (cm): 32.5. Highlights. Width (cm): 37.5. Warranty: 1 Year Warranty On Electrical Parts And Lifetime Free Service. Net Weight (kg): 7.3. Capacity: 2.8 Liters Length (cm): 49. Gross Weight (kg): 8.2. 5 11,000.00 55,000.00 385 Pcs Oven. Four Plates Oven For Bread (stainless Steel) 530x595x570mm. Lpg Type 1 48,924.00 48,924.00 386 Pcs Bread Plates (stainless Steel) 40x 60cm 20 1,027.00 20,540.00 387 Pcs Bread Rack (stainless Steel)15 Layers 40x60cm Heavy Duty 1 20,000.00 20,000.00 388 Pcs Electric Burger Griddle. Large Size Heavy Duty. Size: 73cmx52cmx10cm. Bigger Waster Oil Container. Stainless Steel, Solid Gritty. Food Grade Material. 2 11,475.00 22,950.00 389 Pcs Food Warmer Display Cabinet. Commercial Food Heater Glass Display Cabinet Heavy-duty Curved Deli Cabinet With Lighting. Constant Temperature Heating Display Counter Ideal For Fried Chicken Burger And Cooked Food. Size: Red+3 Compartments: 96x45x60cm. Rated Power: 300w. Rated Voltage: 220v.number Of Internal Layers: Three. Layers. Temperature Range: 30-80°c. Product Weight: 18kg. Built-in Energy-saving Warm Color Lamp, Improve The Display Effect 2 9,125.00 18,250.00 390 Pcs Frying Pan (non-stick, 28 Cm) 3 1,690.00 5,070.00 391 Pcs Measuring Spoon. 1tbsp 15ml. 1/2tbsp 7.5ml. Ltsp 5ml. 1/2tsp 2.5mlmaterial: Stainless Steel+pp. Packing: Pp Bag. 3 400.00 1,200.00 392 Pcs Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 3 2,209.00 6,627.00 393 Pcs Measuring Urn. Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 3 450.00 1,350.00 394 Pcs Mixing Bowl: 30 Cm L30xw27.5xh11.4 Cm Thickness: 0.04 Cm. Material: Stainless Steel 12 900.00 10,800.00 395 Pcs Baking Sheet 11x15 Inches 011 Thickness Heavy Duty Aluminum 10 360.00 3,600.00 396 Pcs Wire Whisk Length: 30 Cm (12 ") Material Stainless Steel 5 320.00 1,600.00 397 Pcs Muffin Pan Non-stick Muffin Pan Dimension: 26.5x35x3cm Capacity: 12 Cup Color: Black Non-stick Surface For Easy Release And Quick Cleanup Dishwasher Safe Ideal For Baking Muffins, Cupcakes, And More Nonstick Coating Helps Ensure Effortless Food Release 5 700.00 3,500.00 398 Set Measuring Spoon 1tbsp 15ml 1/2tbsp 7.5ml Ltsp 5ml 1/2tsp 2.5mlmaterial: Stainless Steel+pp Packing: Pp Bag 6 400.00 2,400.00 399 Set Measuring Cups (12 Pieces, Bpa -free Plastic Long Lasting Used) Large And Medium Cups 6 2,209.00 13,254.00 400 Pcs Measuring Urn Glass, Capacity: 100 Ml. (with 10 Ml Increments), Metric And English System Of Measurement; With Handle And Spout, Clear, Non- Porous, Tempered Glass 6 490.00 2,940.00 401 Pcs Mixing Bowl 30 Cm L30xw27.5xh11.4 Cm Thickness: 0.04 Cm Material Stainless Steel 6 900.00 5,400.00 402 Pcs Baking Sheet 11x15 Inches 011 Thickness Heavy Duty Aluminum 10 360.00 3,600.00 403 Pcs Wire Whisk Length: 30 Cm (12 ") Material Stainless Steel 5 320.00 1,600.00 404 Pcs Electric Stove, 1000 Watts, 12" Diameter, Stainless Steel. With Safety Regulator And Power Indicator. 6 1,500.00 9,000.00 405 Pcs Weighing Scale, Digital "display Mode: Led/lcd+light Weighing Range :40kg Accuracy: 2g Product Size : 35x33x14cm 3 Lcd Display On The Operator’s Side Of The Scale As Well As 3 Lcd Display On The Customer’s Side Minimum Capacity Is 2g. Maximum Capacity Is 40kg Power Source: Built In Rechargeable Battery With Usb Cable Battery Powered Or Connect Usb Cable. Battery Powered Or Connect Usb Cable To Use Weight Platform/tray Material Is Stainless Steel." 4 7,500.00 30,000.00 406 Pcs Scraper(rubber) 30cm X11cmx6.8cm 5 130.00 650.00 407 Pcs Hand Mixer (stainless Steel Bowl) 270x165x290mm, 2.8 Liters Capacity 5 1,755.00 8,775.00 408 Pcs Revolving Cake Stand (aluminum) 12 Inches 5 850.00 4,250.00 409 Pcs Electric Stand Mixer 5.5 Liter(1.9kg) With Bowl And 3 Whisk 6 Speed Setting Dough, Rotating Bowl, Speed Control 3 11,500.00 34,500.00 410 Pcs Rolling Pin Stainless Steel Pressing Stick Pizza Dough Non-stick Dough Roller, (29.5 Cm) 6 300.00 1,800.00 411 Pcs Dough Roller Pin, Wooden. 29.5cm Non-stick Silicone Rolling Pin Pastry Baking Decorating Tool 6 300.00 1,800.00 412 Set Deep Fryer Dimensions (w X H X D) 477 X 318 X 235 Weight 3.81kg Body Material Stainless Steel Color Silver Technical Details Power Consumption 2000w Volume 4l Features Temperature Control Yes 6 7,200.00 43,200.00 413 Pcs Ice Crusher Machine. Electric Stainless Steel Heavy Duty Portable Automatic Rotated Speed: 1500rpm Power:250 Size: 275x190x210mm Capacity: 2 Liter 2 3,900.00 7,800.00 414 Pcs Chest Freezer (inverter) Dual Function Technology (freeze Or Chiller) Solid Top With Glass Cover Inside Digital Temperature Control W/ Lcd Display Dimension: 85:112:70cm 1 28,535.00 28,535.00 415 Set Electric Takoyaki Machine And Double Pan 56 Holes Stainless Steel Size: 437x 435x180mm 6 2,600.00 15,600.00 416 Pcs Waffle Iron Pan 4 Interchangeable Plates 750 Watts 6 1,800.00 10,800.00 417 Pcs Revolving Cake Stand. Nonslip Top And Base. Diameter: 23.5 Cm. Height 14cm. Material: Food Grade Pp. 6 1,076.00 6,456.00 418 Pcs Stainless 4-gas Burner, 55l Gas Oven Hybrid Electric And Lpg 1 40,000.00 40,000.00 419 Pcs Electric Kettle 1.5l 3 900.00 2,700.00 420 Pcs Stand-up Kitchen Mixer-standard (4 Liters Stainless Steel Bowl With Cover) Tilting Mixing Arm. Accessories: Beater, Dough Hook, Whisk. 12 Speed Setting. 2 10,000.00 20,000.00 421 Pcs Hand Mixer. Powerful 180w Motor And 7 Speeds Including Turbo Setting Made Of Stainless-steel Abs. Multifunctional With Chrome Accessories: X2 Beaters, X2 Dough Hooks 5 2,500.00 12,500.00 422 Unit Rice Cooker Standard 2l Home Multifunctional Home Cooking 220v. Fast Cooking, Keep Warm Function, Non-stick Coating, Stainless Steel Cover. Input Voltage. 220v. Power Consumption 400w. Volume Capacity 2l Dimension (l X W X H) 215*215*215 3 2,500.00 7,500.00 423 Unit Electric Rice Cooker 10l 2 5,000.00 10,000.00 424 Pcs Blender 1.5 Liter 5 700.00 3,500.00 425 Pcs Pressure Cooker 3.5 Liter 2 1,200.00 2,400.00 426 Pcs Gas Stove Rack. Plain Sheet With Steel Frame. With Cooking Platform At The Top. Kitchen Heavy Duty Gas Tank Holder Kitchen Organizer Stainless. Made Of Carbon Steel 45cmx45cmx90cm. Made Of Carbon Steel Color Black With Partition For 11kg Gasul Tank And For Cooking Materials. 4 5,500.00 22,000.00 427 Pcs Chef's Knife, 8" Stainless Steel 6 350.00 2,100.00 428 Pcs Bread Knife, 8" Stainless Steel 6 350.00 2,100.00 429 Pcs Clever Knife/ Butcher Knife To Chop Bones 20 Cm Blade, 31 Cm From Tip To Handle 6 350.00 2,100.00 430 Pcs Kitchen Scissors 9" Stainless Steel 6 350.00 2,100.00 431 Pcs Utility Knife 61mmx19mm 6 350.00 2,100.00 432 Pcs Boning Knife, 8" Japanese High Carbon Steel 6 350.00 2,100.00 433 Pcs Paring Knife 4" German Stainless Steel 6 350.00 2,100.00 434 Pcs Stainless Peeler For Vegetables 15cmx6cm 6 80.00 480.00 435 Pcs White Cutting Board (for Bread And Pastry) 25.5cmx34cm, Plastic 6 460.00 2,760.00 436 Pcs Green Cutting Board (for Fruits And Vege)25.5cmx34cm, Plastic 6 460.00 2,760.00 437 Pcs Red Cutting Board (raw Meat)25.5cmx34cm, Plastic 6 460.00 2,760.00 438 Pcs Blue Cutting Board (raw Fish)25.5cmx34cm, Plastic 6 460.00 2,760.00 439 Pcs Yellow Cutting Board (cooked Meat) 25.5cmx34cm, Plastic 6 460.00 2,760.00 440 Pcs Brown Cutting Board (raw Crops) 25.5cmx34cm, Plastic 6 460.00 2,760.00 441 Pcs Weighing Scale (dial/analog. 25kg) 1 400.00 400.00 442 Pcs Digital Kitchen Scale 3kg/0.1g And 500g/0.1g 3 690.00 2,070.00 443 Pcs Measuring Cups (1 Set) 6 95.00 570.00 444 Pcs Plastic Measuring Pitcher Jug With Measurement(set) Maximum Of 1 Liter 6 126.00 756.00 445 Pcs Measuring Spoon, Plastic (set) 6 60.00 360.00 446 Pcs Deep Fry Thermometer, Deed Fried Pot Thermometer Oil Temperature Gauge 6 320.00 1,920.00 447 Pcs Meat Thermometer, Brifit Waterproof Kitchen Meat Thermometer, Foldable Digital Instant Read Food Thermometer 6 400.00 2,400.00 448 Pcs Oven Thermometer 6 389.00 2,334.00 449 Pcs Tenderizer, Wooden Circular-50mm Diameter, 3cm Spikes, 190mm Long (flashlight Design) 6 280.00 1,680.00 450 Pcs Skimmer, Fine Mesh Strainer Oil-frying Filter 7cm Diameter, 32 Long 5 80.00 400.00 451 Pcs Wire Skimmer 18cm Diameter, Stainless Steel 5 80.00 400.00 452 Pcs Strainer, Stainless Steel Multi-purpose Food Strainer, Fine Mesh Long Handle 20cm Diameter X 28cm (fine) 5 109.00 545.00 453 Pcs Siever 17.5x12x11.5cm, Stainless Steel Mesh Stainer 6 68.00 408.00 454 Pcs Strainer Medium 20cm Diameter X 28cm (fine) 6 90.00 540.00 455 Pcs Strainer Large 25cm Diameter X 30cm Long, Stainless Steel 6 120.00 720.00 456 Pcs Wooden Turner, Wooden Sandok Kitchen Spatula Spoon Turner Cooking, 3" Width Of Sandok, 10" Long 6 65.00 390.00 457 Pcs Wooden Spatula 9cm Sandok, 34 Cm Long 6 65.00 390.00 458 Pcs Parisienne Spoon, Double-ended Headed Fruit Ice-cream Ball 6 50.00 300.00 459 Pcs Wooden Ladle/spoon 6cm Pang Sandok 30 Cm Long 6 120.00 720.00 460 Pcs Zester, Four-sided Stainless-steel Grater 9-inch Kitchen Multipurpose Grater For Parmesan Cheese, Ginger Vegetables 6 79.00 474.00 461 Pcs Reusable Piping Bags. 26 Pcs/set Silicone Pastry Bag Tips Kitchen Diy Icing Piping Cream 24 73.00 1,752.00 462 Pcs Stainless Funnel Small 4.5cm Opening Diameter, 3.7cm Height, 0.6cm Tube Diameter 6 60.00 360.00 463 Pcs Stainless Funnel Small 5.5cm Opening Diameter, 5cm Height, 0.9cm Tube Diameter 6 70.00 420.00 464 Pcs Stainless Funnel Small 7.5cm Opening Diameter, 6.7cm Height, 1.2cm Tube Diameter 6 60.00 360.00 465 Pcs 8" Tongs 6 89.00 534.00 466 Pcs 12" Tongs 6 120.00 720.00 467 Pcs Pepper Mill, 5-inch Wooden Peeper Grinder 6 60.00 360.00 468 Pcs Salt Mill 5-inch Wooden Salt Grinder 6 60.00 360.00 469 Pcs Wire Whisks 12 Inches 6 80.00 480.00 470 Pcs Wire Whisks 8 Inches 6 89.00 534.00 471 Pcs Can Opener 6 120.00 720.00 472 Pcs Bottle Opener 6 79.00 474.00 473 Pcs Soup Ladle 3oz 6 140.00 840.00 474 Pcs Soup Ladle 6oz 6 160.00 960.00 475 Pcs Soup Ladle 8oz 6 160.00 960.00 476 Pcs Soup Ladle 12oz 6 180.00 1,080.00 477 Pcs Stock Pot, 30cm High Quality Stainless Steel 10 1,500.00 15,000.00 478 Pcs Stock Pot 24cm High Quality Stainless Steel 10 999.00 9,990.00 479 Pcs Frying Pan 22cm Marble Frypan 10 500.00 5,000.00 480 Pcs Frying Pan 28cm Marble Frypan 48.2x28x5.7cm 10 600.00 6,000.00 481 Pcs Casserole 18 Cm Aluminum, Double Handle, Rust Free 10 250.00 2,500.00 482 Pcs Casserole 20 Cm Aluminum, Double Handle, Rust Free 10 300.00 3,000.00 483 Pcs Casserole 28 Cm Aluminum, Double Handle, Rust Free 10 600.00 6,000.00 484 Pcs Wok 40 Cm Chinese Nonstick Wok Pan 10 500.00 5,000.00 485 Pcs Double Broiler 28 Cm Stainless Steel Two-layer Double Soup Steamed Dual Purpose 10 280.00 2,800.00 486 Pcs Glass Rack. 25-compartment Gray Full-size Glass Rack With 2 Blue Extenders 2 2,500.00 5,000.00 487 Pcs Plate Rack. Microwire 24 Compartment Catering Plate Rack For Plates Up To 11" - Wash, Store, Transport 3 3,000.00 9,000.00 488 Pcs Baking Tray 15"x17" 5 180.00 900.00 489 Pcs Roasting Tray 15"x17'' 5 180.00 900.00 490 Pcs Braising Pan 32cm Stainless Steel Nonstick Pan 5 350.00 1,750.00 491 Pcs Hanging Cabinet With Glass, Std. 2.5'x 3' X 5ft (free Installation) 3 10,000.00 30,000.00 492 Pcs Floor Mops (broom Type) Using Cotton Absorbent Strips 10 180.00 1,800.00 493 Pcs Broom (walis Tambo) 10 80.00 800.00 494 Pcs Dustpan (plastic) 11"x10" Pan, 24" Handle 10 120.00 1,200.00 495 Pcs Garbage Bin (4 Gals.) 10 300.00 3,000.00 496 Pcs Paper Towel Dispenser 10 200.00 2,000.00 497 Pcs First Aid Cabinet, Plastic Box 30cmx12cmx30co With Transparent Cover (free Installation) 2 1,500.00 3,000.00 498 Pcs Fire Extinguisher 3lbs Abc Dry Chemical Refillable (free Installation) 4 2,000.00 8,000.00 499 Pcs Mixing Bowl Small, Stainless Steel Mixing Bowl 20cm 12 80.00 960.00 500 Pcs Mixing Bowl Medium, Stainless Steel Mixing Bowl 30cm 12 130.00 1,560.00 501 Pcs Stainless Steel Basin, 45 Cm Diameter 5 180.00 900.00 502 Pcs Stainless Steel Basin, 38 Cm Diameter 5 120.00 600.00 503 Pcs Baking/ Pastry Brush, Heat Resistant, Standard Size 10 35.00 350.00 504 Pcs Plastic Containers, Microwavable Round Canister, Food Storage Container (400 Ml) 40 20.00 800.00 505 Pcs Multipurpose Plastic Pail 2.5 Gallons Capacity 4 120.00 480.00 506 Pcs Food Grade Silicone High Temperature Resistant Baking Mat Oven Baking (to Match Baking Pan), Browns Silicone Baking Oven Mat Liner, Non-stick For Pastry Cookies Dough 12 90.00 1,080.00 507 Pcs Non-slip Doormat 75x45 Cm Rubber 18 500.00 9,000.00 508 Pcs White Hand Towels Hanging Kitchen Hand Dry 20cmx30cm 12 30.00 360.00 509 Pcs Potholder, Basahan Bilog 6 Inches Diameter 12 15.00 180.00 510 Pcs Round Cake Molder 4, 6, 8 Inches Set 5 161.00 805.00 511 Pcs Square Cake Molder 9, 11, 13 Inches Set 5 160.00 800.00 512 Pcs Baguette Bake Mold Pan 34.5 Cmx 24cm (6cm Molder) Nonstick 10 399.00 3,990.00 513 Pcs Meat Processing Machine (meat Grinder Manual) 1 5,000.00 5,000.00 514 Set Stainless Icing Tip (set-12pcs) Cake Decorating Kit Stainless. Icing Piping Nozzles Pastry Tips Cake. 10 499.00 4,990.00 515 Pcs Cupcake Molder Tray Of 6 12 Holes Baking Pan Muffin Cup Cake 10 89.00 890.00 516 Pcs Large Wooden Turner For Large Oven. Kitchen Turner Flat Spatula Scraper, Acacia Wood 10.5 Inches Long And 2.75 Inches Turner 3 200.00 600.00 517 Pcs Dressing Mirror (whole Body Mirror With 4 Wheels Height 5ft. Width 14 Inches) 1 1,500.00 1,500.00 518 Set Dish Towels (10 Pc. Per Set 25 Cm X 25 Cm Microfiber Super Absorbent) 5 993.00 4,965.00 519 Pcs Soap Dish (dual Soap Case With Cover & Handle- Bathroom Soap Dish / Soap Case) 50 70.00 3,500.00 520 Pcs Detergent (detergent Powder Set 6 Kilos-i Kilo X 6 Pouches) 50 288.00 14,400.00 521 Pcs Hand Soap (liquid Hand Soap Antibac 1 Gallon) 10 216.00 2,160.00 522 Pcs Pots (extra Size #4 (26cm Diameter 16 Cm In Height) 20 673.20 13,464.00 523 Pcs Pans (nonstick 12") 5 195.00 975.00 524 Pcs Toilet Paper Holder (wall Mounted Bathroom Toilet Paper Holder Tissue) 2 238.00 476.00 525 Pcs Dipper (plastic Dipper L 11" X W 36"x H 41" 5 100.00 500.00 526 Pcs Pail (utility Pail With Metal Handle 10l/26x27 Cm) 8 250.00 2,000.00 527 Pcs Trash Can (with Plastic Swing Lid L-27, W- 17., H- 40.5 Cm) 5 350.00 1,750.00 528 Pcs Toothbrush (extra Clean Toothbrush 5 Pk -soft) 20 182.40 3,648.00 529 Pcs Hairbrush (natural Wood Hairbrush Comb) 20 120.00 2,400.00 530 Pcs Comb (1 Dozen Suklay 3-hole X Sz-28 Big) 20 90.00 1,800.00 531 Pcs Toothpaste (red 100 Ml) 20 58.20 1,164.00 532 Pcs Plastic Tumbler 20 300.00 6,000.00 533 Pcs Razor (twin Blade Disposable Razors) 20 120.00 2,400.00 534 Pcs Nail Clipper (stainless Nail Clippers H-8 Cm Wt-0.046 Kg) 20 84.00 1,680.00 535 Pcs Nail File (12 Pcs Red Nail File (medium) 20 50.00 1,000.00 536 Pcs Deodorant (roll On 50 Ml Bottle) 20 150.00 3,000.00 537 Pcs Face Towel (basic Face Towel - Free Size) 20 110.00 2,200.00 538 Pcs Feminine Napkin (silk Floss 12 Pcs) 50 45.00 2,250.00 539 Pcs Dust Catcher With Broom (2n1 Broom Dustpan Set Windproof Floor Sweeper With Broom) 10 350.00 3,500.00 540 Pcs Feather Duster (soft Magic Feather Duster Long Size And Colorful Colors (plastic) 10 110.00 1,100.00 541 Pcs Wash Rags (round Rags) 10 30.00 300.00 542 Pcs Floor Mop (magic Spin Mop With Bucket 360° Rotating Floor Cleaning Plastic Liner) 10 900.00 9,000.00 543 Pcs Garbage Can (super Convenient Mini Flip Lid Trash Can (plastic) 10 150.00 1,500.00 544 Pcs Sponge (high Density Double-sided Dishwashing Sponge 7x10x3 Cm) 10 118.00 1,180.00 545 Pcs Spray Bottle (garden Sprayer Capacity: 500ml) 10 155.00 1,550.00 546 Pcs Table Napkin (1 Ply 40s Sheets Folded) 10 50.00 500.00 547 Pcs Place Mat (table Placemat Pvc Anti-slip Placemat Washable Durable Kitchen S:30x45cm) 10 50.00 500.00 548 Set Plates (12 Pcs Plates 8-inch Melamine White) 3 634.00 1,902.00 549 Set Drinking Glass (drinking Glass 10 Oz Tall Clear Tumblers Set Of 6 L=5.5cm H-12 Cm) 1 718.00 718.00 550 Pcs Pitcher (durable Crystal-clear Glass 1.5 L) 2 300.00 600.00 551 Pcs Bowl (serving Bowls, Clear Glass 20 Cm) 2 130.00 260.00 552 Pcs Water Pail (utility Pail With Metal Handle 10l Color: Red/ Blue L-27cm, W-27cm, H-26 Cm 4 350.00 1,400.00 553 Pcs Laundry Bar Soap (scrubber Bar 125g) 120 20.00 2,400.00 554 Pcs Clothesline (1 Pc Nonslip Clothesline 35 M) 20 140.00 2,800.00 555 Pcs Clothes Pin (laundry Clothes Pins Spring Clips 24 Pcs Plastic) 20 100.00 2,000.00 556 Pcs Wash Basin Plastic (laundry Basin 23 Inch) 5 250.00 1,250.00 557 Pcs Laundry Bag Set (4 Pcs/set Laundry Washing Bag- 1 Pc M(30cmx40cm) 1pc L (40cmx50cm) 1pc Xl (50x60 Cm) 10 200.00 2,000.00 558 Pcs Ironing Board (ironing Board With Stand Portable 36"iron Board (70cm To 86 Cm) 5 1,600.00 8,000.00 559 Pcs Flat Iron (non-stick Teflon Saleplate Spray Function Ht &width 251x170x120mm 5 1,000.00 5,000.00 560 Pcs Pants. Standard Slacks Medium Size 3 1,000.00 3,000.00 561 Pcs Polo. Public School Uniform Type. Medium Size 3 500.00 1,500.00 562 Pcs Blouse. Public School Uniform Type. Medium Size 3 500.00 1,500.00 563 Pcs Skirt. Commonly Used In Public School Type. Medium 3 600.00 1,800.00 564 Pcs Long Sleeves. Cotton, Medium Size 3 1,000.00 3,000.00 565 Pcs T-shirt With Collar. Cotton, Medium Size 3 800.00 2,400.00 566 Pcs T-shirt Without Collar. Cotton, Medium Size 3 500.00 1,500.00 567 Pcs Maong Pants. Medium Size, Female Cut, Medium 3 1,000.00 3,000.00 568 Pcs Maong Pants. Medium Size, Female Cut, Medium 3 1,000.00 3,000.00 569 Pcs Maleta. 7kg Hand Carry Luggage Travel Bag. 360 Universal Wheels. Divided Internal Space. 57 Liters Capacity. 40 X 57 X25 Cm Dimension. 3 1,500.00 4,500.00 570 Pcs Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Large Size. Black 20 250.00 5,000.00 571 Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Medium Size. White 20 250.00 5,000.00 572 Pcs Chef’s Hat. Chef Cap For Men Women Chef Head Cap Breathable Hat Fast Food Restaurant Coffee Shop Work Wear. Small Size. White 20 250.00 5,000.00 573 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Large 20 450.00 9,000.00 574 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Medium 20 450.00 9,000.00 575 Pcs Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant. Small 20 450.00 9,000.00 576 Pcs Hair Net. Unisex Hair Net Cap Hair Mesh Weaving Wig Cap Hair Styling Tools Nylon Hair Nets Hollow Out High. Black 300 30.00 9,000.00 577 Dozen Hangers (12 Pcs. Plastic Hanger) 1 181.00 181.00 578 Pcs Wash Basin. Aluminum 32" Diameter. 6 1,500.00 9,000.00 579 Pcs Washing Machine. 7.0 Kg Digital Inverter Fully Automatic Top Load Washing Machine (water Level: 5, Gross Weight: 31kg, Net Weight: 27 Kg Gross Dimension: (wxhxd) 580x890x600mm Net Dimension: (wxhxd)= 540x857x568mm) 3 25,000.00 75,000.00 580 Pcs Vacuum Cleaner (heavy Duty Gas 12-25 Pl Wet And Dry Vacuum Cleaner/ Extractor With Power Socket System 1,250 W Weight-9kg, Max Input Power- 1,250 W, Max Vacuum Power-200 Mbar) 2 12,000.00 24,000.00 581 Pcs Socks (cotton Socks Unisex High Street Socks Sixe:38-44 5 200.00 1,000.00 582 Pcs Dress (sleeve Ruffle Hem Plain Elegant Red Small, Medium, Large) 3 500.00 1,500.00 583 Pcs Slippers (sizes 7-10, Flipflop Brand Light Weight And Durable 5 150.00 750.00 584 Pcs Mattress For Single Bed (30x75 Single Size Polyester 3.5 Inch Thick) 5 4,440.00 22,200.00 585 Pcs Pillows (foam Pillow 4x12"x20") 5 426.00 2,130.00 586 Pcs Bedsheets (cotton Full Garterize 3n1 Bed Sheets, For Single Bed Size) 5 1,100.00 5,500.00 587 Pcs Alarm Clock (stopwatch, Digital Timer) 5 850.00 4,250.00 588 Pcs Goalball, Standard Size And Weight, Blue 2 20,000.00 40,000.00 589 Pcs Basketball, Standard Size 2 2,000.00 4,000.00 590 Pcs Soccer Ball, Standard Size 2 1,500.00 3,000.00 591 Set Bocce Balls, 100mm Diameter, 4 Balls Colored Red, 4 Balls Colored Green, With Palena Ball Color White. Set With Bag. 2 20,000.00 40,000.00 592 Piece White Cane For Adults- Foldable Aluminum With White Anodized Finish And Plastic Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 10 1,500.00 15,000.00 593 Piece White Cane For Kids- Foldable Aluminum With White Anodized Finish. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 10 1,150.00 11,500.00 594 Set Chess Board For Blind. Plastic Pieces With Special Markings, Board With Pattern To Distinguish White And Black Squares With Slots To Hold The Pieces. At Least 12"x24" Plastic Board. 4 5,000.00 20,000.00 595 Set Scrabble Board For Blind. Made Of Plastic With Special Markings On Tiles And Board. At Least 18"x18" Board. 5 4,000.00 20,000.00 596 Set Dolch Basic Sight Words. (bitay Max). Printed On White Tarpaulin 2 Ftx 3 Ft Binded With Two Wooden Sticks. With String (sabitan). Words At Least 2" Height Black, Arial Font Style. 5 1,500.00 7,500.00 597 Pcs Meter Stick, 100cm Stainless Steel Ruler 5 500.00 2,500.00 598 Box Braille Paper. White Fanfold Tractor-feed Braille Transcribing Paper: 8.5 X 11 Inches, 3-hole And 19-hole Punch. Dimensions:10.1 × 11.5 × 5.4 Inches. 1000 Sheets 7 10,000.00 70,000.00 599 Box Braille Paper. 11.5"x 8.5". 1000 Sheets 5 7,000.00 35,000.00 600 Box Swell-touch Paper 11 X 11.5-in- 100 Sheets 1 10,000.00 10,000.00 601 Unit Braille Machine, Standard. With Leather Cover. With Warranty On Parts. 2 49,500.00 99,000.00 602 Pcs Braille Slate. 27 Lines, 30 Cells Per Row, Black 25 1,000.00 25,000.00 603 Pcs Braille Contraction Pamphlet. Unified Contraction Pamphlet 4"x6". 25 600.00 15,000.00 604 Pcs Contraction Pamphlet. Nemeth Code. 4"x6". 25 600.00 15,000.00 605 Pcs Cranmer Abacus 25 650.00 16,250.00 606 Pcs Braille Stylus. Round Or Y Shape 25 200.00 5,000.00 607 Set Geometric Measurement. Set Of Protractor, Ruler And Triangles Made Of Plastic With Embossed Marking For The Blind, Standard Size. 24 1,000.00 24,000.00 Delivery Terms: Within 30 Days Drop Off Points: General Santos City Sped Integrated School – Quezon Avenue, Brgy. West, Gsc (ilrc) Payment Terms: Payment To The Service Provider Shall Be Made Through Philippine Veterans Bank Lddap-ada / Mds. In The Case Of Accounts Maintained In Other Bank, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. ***nothing Follows*** Grand Total 7,338,507.00 2. The Deped Now Invites A Bid For The Above Procurement Project. Bidders Must Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project With An Amount Of At Least 50% Of The Abc To Be Bid For Non-expendable And 25% Of The Abc For Expendable. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, I.e., In Section Ii, Instructions To Bidders. Bids Received That Exceed The Abc Per Lot Shall Be Rejected At Bid Opening. The Department Of Education, Division Of General Santos City Division Through Its Bids And Awards Committee (bac) Now Invites Bids For The Herein-mentioned Goods. Delivery Of The Goods Is Required On The Expected Delivery Date(s) Stated Herein. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. A Complete Set Of Bidding Documents In Soft Copy Only May Be Purchased At Deped-division Of General Santos City Bac Secretariat, Located At Tiongson St., Lagao, General Santos City Upon Submission Of A Letter Of Intent, And Payment In Cash On A Non-refundable Fee By Interested Bidders To The Deped Division Cashier. Only Bidders Who Purchased The Bidding Documents Provided Below Shall Be Allowed To Submit Bid/bids Not Later Than The Scheduled Receipt And Opening Of Bids. Bidding Document Price Lot Number Price Lot No. 1 P 10,000.00 5. It May Be Viewed Or Downloaded After Payment From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.gov.ph. The Schedule And Venue Of The Procuring Activities Are As Follows: Activity Date And Time Venue Pre-bid Conference February 19, 2025 2:00 P.m. (wednesday) Sds Conference And Online Via Google Meet Issuance Of Bidding Documents Until March 5, 2025 9:00 A.m (wednesday) To Be Sent To Bidder’s Email Address After Payment Of The Bidding Documents Receipt And Opening Of Bids March 5, 2025 10:00 A.m. (wednesday) Division Office/google Meet Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website: Www.philgeps.gov.ph, For Them To Be Included In The Document Request List Of The Project. The Pre-bid Conference Is Open To All Interested Parties Who May Have Or Have Not Bought The Bidding Documents. 6. Bids Must Be Physically Delivered To The Address And On The Date And Time Stated Herein. Submission Of Digital Copy Of The Bidding Documents Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. A Valid Bid Securing Declaration Must Accompany The Bid(s) In Lieu Of Bid Security. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend The Opening Of Bids At The Address, Date And Stated Herein. Late Bids Shall Not Be Accepted. 7. The Deped-division Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Not Award The Contract(s), Or Annul The Bidding Process Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8. For Further Information, Please Refer To: Ofelia S. Panes Michael Jhon A. Del Sol Administrative Officer Iv (records) Administrative Assistant Ii Bac Secretariat Head Bac Secretariat Member Email: Ofelia.panes@deped.gov.ph Email: Bac.depedgensan@deped.gov.ph Cell No. 09692673871 Cell No. 09278865516 Approved By: Mervie Y. Seblos, Cese Oic – Assistant Schools Division Superintendent Bac Chairperson Bacsec/mds

Details: Description Invitation To Bid Project No: 005 – 2025 - Rb 1. The Department Of Education Through The Fy 2025 Gaa Intends To Apply The Sum Of Seven Million Three Hundred Thirty-eight Thousand Five Hundred Seven And 00/100 (7,338,507.00) Being The Approved Budget For The Contract (abc) For Lots 1 And 2 For The Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers. Bids Received In Excess Of Abc Shall Be Automatically Rejected At The Bid Opening. Unit Description Qty Cost Abc (vat Inclusive) 1 Lot Procurement Of Assessment Tools For Inclusive Learning Resource Centers 1 Set Adaptive Behavior Scale (specs: Vineland-3; Manual; Interview Form, Teacher Form, Parent Form 1 40,000.00 40,000.00 2 Set Autism Checklist (specs: Childhood Autism Rating Scale For 2 Yrs Old And Above: 1manual,25 Standard Rating Booklet,25 High Functioning Rating Booklet For Parents And Caregivers) 1 35,000.00 35,000.00 3 Piece Intelligence Test Booklet (specs: Raven's Standard Intelligence Test For 12 Yrs Old And Above) 10 3,500.00 35,000.00 4 Set Non-verbal Intelligence Test (specs: Raven’s Colored Intelligence Test For 4-11 Yrs Old: 1 Manual, 1 Test Booklet, Answer Key) 1 49,900.00 49,900.00 5 Set Non-verbal Intelligence Test (specs: Raven’s Standard Intelligence Test For 12 Yrs Old And Above: 1 Manual, 1 Test Booklet, Answer Key) 1 49,900.00 49,900.00 6 Set Psychomotor Speed, Visual Search And Sequencing, And Attention Test (specs: Comprehensive Trail-making Test: 1 Manual, 10 Record Booklets, And A Storage Box) 1 20,000.00 20,000.00 7 Set Trauma And Posttraumatic Stress In Children Test (trauma Symptom Checklist By Dr. John Briere For 8-17 Yrs Old: 25 Piece. Screening Form And Technical Paper 1 12,000.00 12,000.00 8 Set Verbal Intelligence Test (specs: Slosson Intelligence Test For 5 Yrs Old And Above: 1 Manual, 25 Score Sheets And Stimulus Item For The Blind) 1 35,000.00 35,000.00 9 Set Verbal Intelligence Test Score Sheets (specs: Slosson Intelligence Test For 5 Yrs Old And Above: 25 Piece) 1 12,200.00 12,200.00 With License Delivery Terms: Within 30 Days Drop Off Points: General Santos City Sped Integrated School – Quezon Avenue, Brgy. West, Gsc (ilrc) Payment Terms: Payment To The Service Provider Shall Be Made Through Philippine Veterans Bank Lddap-ada / Mds. In The Case Of Accounts Maintained In Other Bank, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. Subtotal P 289,000.00 2 Lot Procurement Of Assistive Devices, Equipment, Supplies And Materials For Inclusive Learning Resource Centers 1 Unit 2hp Split Type Aircon, Inverter (free Installation) At Least 2 Years Warranty After Sales Service 1 49,000.00 49,000.00 2 Piece 8.1cu. Ft. Bottom Freezer Inverter Ref (specs: Net Weight 66kg, Net Dimension 23.6x72.8x26.8 Inches, Color White) At Least 2 Years Warranty After Sales Service 1 30,000.00 30,000.00 3 Unit Android Smart Television 55" 4k Uhd Bluetooth Connectivity, Mobile Screen Mirroring, Netflix, Wireless Connectivity, Youtube Audio Out (mini Jack), Component In (y/pb/pr), Composite In (av), Ethernet (lan), Hdmi, 220v Free Installation At Least 1 Year Warranty With After Sales Service 4 35,000.00 140,000.00 4 Set Cctv - 16ch-dvr 8 Irpf Bullet Camera 8 Irpf Dome Camera 16 Rolls (20meters) Siamese Cables, 35-bng 20-male Head 12v20a18ch Centralized Power Supply Free Installation At Least 1 Year Warranty With After Sales Service 1 49,000.00 49,000.00 5 Piece Solid Top Chest Freezer, 22 Cubic Ft. 355watts, Hxwxd (91cmx198cmx73cm) Dual Function Freezer And Chiller, Roller Feet Galvanized Inner Lining, 2-basket, 2-grip Handles At Least 1 Year Warranty With After Sales Service 1 40,000.00 40,000.00 6 Piece Vacuum Cleaner (heavy Duty Gas 12-25 Pl Wet And Dry Vacuum Cleaner/ Extractor With Power Socket System 1,250 W Weight-9kg, Max Input Power- 1,250 W, Max Vacuum Power-200 Mbar) At Least 1 Year Warranty With After Sales Service 4 12,000.00 48,000.00 7 Piece Washing Machine. 10.5 Kg Digital Inverter Fully Automatic Front Load Washing Machine (total Capacity: 10.5kg Rated Washing Power: Water Pressure: 0.02-1 Mpa Spin Speed: 1400 Rpm Gross Weight: 67 Kg Warranty: 1 Year Parts & Labor / 10 Year Motor Dimension (wxdxh): 595mm X 520mm X 850mm At Least 1 Year Warranty With After Sales Service 1 30,000.00 30,000.00 8 Piece Water Dispenser. Hot And Cold Water/drinking Household Multifunctional Top Loading. Stainless Steel Casing Color White. Dimension: 85x29x29 Cm. Large Bottom Locker. At Least 1 Year Warranty With After Sales Service 9 8,000.00 72,000.00 9 Unit 1500va Ups (black) Input Voltage: 220vac Frequency: 50hz – 60hz, Output Voltage: 220vac Capacity Va/wattage: 1500va/1050watts Transfer Time: ≤10ms Including Direction Time At Least 1 Year Warranty With After Sales Service 2 4,000.00 8,000.00 10 Set All In One Personal Desktop Computer 23" Display Monitor Processor: 2.5 To 3.8 Ghz Ram Memory: 16 Gb Storage: 1 Tb Ssd Wifi Ready, Hdmi, Usb 2.0 Or 3.2 Slots With Graphics Card For Editing Photos And Videos, With Mouse, Mousepad And Keyboard At Least 1 Year Warranty With After Sales Service 3 49,500.00 148,500.00 11 Piece Laptop - 16"-17"" Monitor Processor: 2.5 Ghz To 3.5 Ghz Ram: 16gb Storage: 1tb Ssd With Graphics Card With Bag, Mouse, And Mouse Pad At Least 1 Year Warranty With After Sales Service 13 49,000.00 637,000.00 12 Unit Svc 1500w Automatic Voltage Regulator1500va Avrservo Motor Typeinput Voltage: 140v-260vacoutput Voltage : 110v/220v Output Overvoltage : 246±4voutput Voltage Precision : <±4% Frequency : 50/60hz Temperature Rise : <80k Efficiency : >92%regulation Time : <1s(when Variation Of Input Voltage Is 10%) At Least 1 Year Warranty With After Sales Service 1 4,000.00 4,000.00 13 Unit Svc 3000w Automatic Voltage Regulator 3000va Avr Servo Motor Type Input Voltage : 140v-260vac Output Voltage : 110v/220v Output Overvoltage : 246±4v Output Voltage Precision : <±4% Frequency : 50/60hz Temperature Rise : <80k Efficiency : >92% Regulation Time : <1s(when Variation Of Input Voltage Is 10%) At Least 1 Year Warranty With After Sales Service 1 5,000.00 5,000.00 14 Unit 3in1 Printer (print, Scan, Copy) Dye Ink, A4 (black / Color) (cyan, Magenta, Yellow) Paper Sizes: Legal (8.5 X 14"), Indian-legal (215 X 345 Mm), 8.5 X 13", Letter, A4, 16k (195 X 270 Mm), B5, A5, B6, A6, Hagaki (100 X 148 Mm), 5 X 7", 5 X 8", 4 X 6", Envelopes: #10, Dl, C6 Maximum Paper Size: 215.9 X 1200 Mm Dimensions (w X D X H): 375 X 347 X 179mm, Weight: 3.9 Kg Ac 220-240 V, 50-60 Hz, Usb 2.0 At Least 1 Year Warranty With After Sales Service 8 15,000.00 120,000.00 15 Bottle Printer Dye Ink Color Black 65 Ml 50 300.00 15,000.00 16 Bottle Printer Dye Ink Color Cyan 65 Ml 50 300.00 15,000.00 17 Bottle Printer Dye Ink Color Magenta 65 Ml 50 300.00 15,000.00 18 Bottle Printer Dye Ink Color Yellow 65 Ml 50 300.00 15,000.00 19 Unit A3 Size Ink Tank Printer, Inkjet, 30ppm 4 Colors (cyan, Magenta, Yellow, Black) Integrated Ink Tank System, Usb 2.0 Paper Size: A3 (297mm X 420mm), A4 (210mm X 297mm), A5 (148mm X 210mm), A6 (105mm X 148mm) Resolution: 1400dpi At Least 1 Year Warranty With After Sales Service 1 30,000.00 30,000.00 20 Bottle Sublimation Ink - 100ml (black) 10 350.00 3,500.00 21 Bottle Sublimation Ink - 100ml (cyan) 10 350.00 3,500.00 22 Bottle Sublimation Ink - 100ml (light Cyan) 10 350.00 3,500.00 23 Bottle Sublimation Ink - 100ml (light Magenta) 10 350.00 3,500.00 24 Bottle Sublimation Ink - 100ml (magenta) 10 350.00 3,500.00 25 Bottle Sublimation Ink - 100ml (yellow) 10 350.00 3,500.00 26 Unit Laser Printer Compact Mono Laser Multi-function Laser Printer A4 Print Speed Up To 34 Ppm (black) Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 Full Capacity Toner Included. Yield Up To 1200 Pages (black)* Auto 2-sided (duplex) Printing, 50 Sheets Auto-document Feeder (adf), 2-line Lcd Dimensions: 410 Mm × 399 Mm × 319 Mm Up To 250 Sheets Of 80 Gsm Plain Paper Paper Size: A4, Letter, B5 (jis), B5 (iso), A5, A5 (long Edge), B6 (jis), A6, Executive, 16k (195x270 Mm), A4 Short (270mm Paper), Com-10, Dl, C5, Monarch, Legal And Folio At Least 1 Year Warranty With After Sales Service 1 16,000.00 16,000.00 27 Piece Toner Ink For Laser Printer Color Black 10 2,500.00 25,000.00 28 Unit Wireless Printer 6 Colors (cyan, Light Cyan, Magenta, Light Magenta, Yellow, Black) Printing Technology: Micropiezo Printhead Pvc/id Card Printing: Yes Printer Borderless 300 Gsm Wi-fi A4 (210mm X 297mm) Usb: Usb 2.0 Network: Wi-fi Ieee 802.11b/g/n, Wi-fi Direct Network Protocol: Tcp/ipv4, Tcp/ipv6 Network Management Protocols: Snmp, Http, Dhcp, Apipa, Ping, Ddns, Mdns, Slp, Wsd, Lltd Compact Integrated Tank Design Replaceable Maintenance Box High Yield Ink Bottles Ultra-high Page Yield Of 2,100 Pages (colour) Rated Voltage: Ac 220-240 V Rated Frequency: 50 - 60 Hz, Operating: 19 At Least 1 Year Warranty With After Sales Service 1 23,000.00 23,000.00 29 Bottle Universal Pigment Ink - 1liter (black) 2 1,500.00 3,000.00 30 Bottle Universal Pigment Ink - 1liter (cyan) 2 1,500.00 3,000.00 31 Bottle Universal Pigment Ink - 1liter (light Cyan) 2 1,500.00 3,000.00 32 Bottle Universal Pigment Ink - 1liter (light Magenta) 2 1,500.00 3,000.00 33 Bottle Universal Pigment Ink - 1liter (magenta) 2 1,500.00 3,000.00 34 Bottle Universal Pigment Ink - 1liter (yellow) 2 1,500.00 3,000.00 35 Unit Photocopier 28 Copies Per Minute Direct Usb Printing/scanning Copier/printer/colored Scanner Enlarger/reducer Automatic Back-to-back/duplex Printing Touchscreen Operating Panel Original Size Up To 11x17 A3 At Least 1 Year Warranty With After Sales Service 1 49,200.00 49,200.00 36 Piece Toner Ink For Photocopier 20 1,800.00 36,000.00 37 Piece A3/a4 Laminator Machine Hot/cold/reverse 220v Heavy Duty Product Size: 450*175*92mm Product Weight: About 4.5kg Temperature Range: 80-180℃ Film Thickness: ≤1mm Over-plastic Width: ≤330mm At Least 1 Year Warranty 3 5,000.00 15,000.00 38 Unit A4/a3 Sliding Paper Cutter Heavy Duty Metal Base Paper Trimmer For Photo/vinyl/card Rolling Blade Dimensions: 441mm X 169mm (a4) / 580mm X 169mm (a3) Maximum Cutting Width: 318mm (a4) / 450mm (a3) Materials: Aluminum Alloy, High-carbon Steel, Plastic Maximum Sheets Per Cut: 10 Sheets Of 70g Standard Copy Paper At Least 1 Year Warranty With After Sales Service 2 2,000.00 4,000.00 39 Unit Electric Paper Shredder Machine Automatic Heavy Duty Black Paper Cutter Shredder, Weight:17.55kg Size & Spec.: Shred Capacity: 16 Sheets; Shred Size: 4x40mm; Security Level:4 Can Shred: Cd/dvd, Paper, Card, Paper Clip, Staple Continuous Run Time: 30min, Bin Capacity: 31l Machine Noise: 58db Machine Power: 240w, Dimensions:390x302x615mm At Least 1 Year Warranty With After Sales Service 2 20,000.00 40,000.00 40 Piece Portable Sound System With Microphone ( Active Potable Trolley Speaker , 600w Max Power, Bluetooth + Tws, Usb & Sd Playback, Fm Radio, Line-in & Line -out, 2 Guitar Input, 2 Wired Mic Input, 180 Channels, Mic Priority, High Quality Lead Acid 12ah Battery, 12 Dc Input, Dimensions: (l) 36.5cm (w) 40 Cm (h) 67.5 Cm, 2 Fee Wireless Mic) At Least 1 Year Warranty With After Sales Service 2 20,000.00 40,000.00 41 Unit Price Labeler Size & Spec.: 230x130x55mm, With Ink Wheel And Price Label Sticker Color: Black, Material: Abs 1 1,500.00 1,500.00 42 Unit A3 Size Heavy Duty Digital Heat Press Machine 15x18 Inches Flatbed Auto-open Drawer Type *auto-open Heat Press *15x17.75inches Flatbed Working Area *watts: 1800 Watts At Least 1 Year Warranty With After Sales Service 1 20,000.00 20,000.00 43 Unit Cap Press Machine For Sublimation Printing Watts: 450 Press Handle Digital Controller Aluminum Heating Plate Pressure Knob At Least 1 Year Warranty With After Sales Service 1 6,000.00 6,000.00 44 Unit Digital Mug Press Heavy Duty, 220volts, 280watts 11oz Built In Heating Pad Replaceable Heating Pad At Least 1 Year Warranty With After Sales Service 2 6,000.00 12,000.00 45 Piece Acoustic Guitar, Glossy Finish, Body Shape: Redondo Scale Length: 25.6" No. Of Frets: 20, Fret Size: 2.4mm Material Made: Bod, Back & Neck (mahogany) Fingerboard Radius: 15.75", Nut Width: 1.69" With Pickup Tuner And Preamp System Electronics: Controls Volume, Bass, Treble 3 6,050.00 18,150.00 46 Unit Brailler Machine - Metal Carrying Handle Paper Size Maximum: 11.5 X 14 In (29.2 X 35.6 Cm) Weight: 10.6 Lb (4.8 Kg), Recommended Paper Weight: 90 Lb Includes Leather Dust Cover, Audible Bell Sound Seven Spaces Before End Of Line Dot Height: .019 In (.5 Mm), Dot Diameter: .057 (1.4 Mm) Dot Spacing: .09 In (2.3 Mm), Character Spacing: .24 In (6 Mm) Line Spacing: .4 In (10 Mm) 3 49,500.00 148,500.00 47 Unit Mirrorless Camera With Rf-s 18-45mm F/4.5-6.3 Is Stm Lens Kit 24.2mp Aps-c Cmos Sensor Digic X Image Processor Uhd 4k 30p Video Recording Dual Pixel Cmos Af Ii With 651 Points 2.36m-dot Electronic Viewfinder 3.0"" 1.62m-dot Vari-angle Touchscreen 15 Fps Electronic Shutter Movie For Close-up Demos Mode Vertical Movie Mode, Multi-function Shoe, Wi-fi & Bluetooth At Least 1 Year Warranty With After Sales Service 1 49,000.00 49,000.00 48 Unit 18-35mm F/1.8 Dc Hsm Art Lens Dimensions (diameter × Length): Φ78mm × 121mm / Φ3.1in. × 4.8") Weight:810g / 28.6oz. Petal Type Lens Hood Lh780-06 Front Cap Lcf-72mm Iii, Rear Cap Lcr Ii 1 40,000.00 40,000.00 49 Set Speedlite Flash Ttl For Camera Built-in 2.4ghz X Wireless Radio System Compatible With Canon E-ttl / E-ttl Ii Guide Number: 118' At Iso 100 And 105mm Zoom Range: 24-105mm (14mm With Panel) Tilts From -7 To 90°, Rotates 270° Wireless Master/slave Ttl Functionality Recycle Time: 0.1-2.2 Second At Least 1 Year Warranty With After Sales Service 1 5,000.00 5,000.00 50 Unit Portable Camera Tripod (heavy Duty Aluminum) 22lbs Load 67”/1.7m With Detachable Monopod For Dslr, Military Magnesium Aluminum Alloy, Corrosion Resistance Weight: 1.5kg, 28mm Metal Ball Head, 360 Degrees Rotation 5 Sections Tube Leg, Max Diameter: 25mm Height Without Column: 51", Height With 2 Sections Center Column: 67" 1 5,000.00 5,000.00 51 Unit 2.4ghz Wireless Microphone System Transmitter 2.4ghz Frequency Hopping System 200meters Wireless Range Lithium Battery Parameters: 3.7v ⎓ 140mah, 0.518wh 24h All Day Recording Intelligent Noise Cancellation Dynamic Range:86db, Type-c Input, Net Weight: 12g Dimensions: 48mmx22mmx16mm (1.89”x0.87”x0.63”) At Least 1 Year Warranty With After Sales Service 1 3,000.00 3,000.00 52 Unit 2.4ghz Wireless Microphone System Receiver 2.4ghz Frequency Hopping System 200meters Wireless Range, Type-c Input Lithium Battery Parameters: 3.8v ⎓ 200mah, 0.76wh, 5v ⎓ 200ma Dimensions: 48mmx28mmx15mm (1.89”x1.10”x0.59”) Net Weight: 16g At Least 1 Year Warranty With After Sales Service 2 3,000.00 6,000.00 53 Unit Studio Lighting Softbox 50 * 70cm With 2m Light Stand And 45w Light Bulb Max Height: 200cm / 78" Collapsible Height: 65cm / 32" 2 1,500.00 3,000.00 54 Unit 16port Desktop/rackmount Switch Network Switch Hub 16 Port 1 4,000.00 4,000.00 55 Unit 4k Hdmi To Hdmi Wire (10 Meters) 9 1,000.00 9,000.00 56 Unit Audio Voice Recorder. Built-in 375mah Battery, Specification: Recording Time: 512kbps， 32gb: About 144 Hours. Storage Media: Tf Card, 32gb, Battery Capacity: 375mah, Package Size: 15.2x7.8x3.7cm/5.9x3x1.4in, Package Weight: 135g/4.7oz At Least 1 Year Warranty With After Sales Service 3 2,674.00 8,022.00 57 Piece Calculator. Basic Calculator Big Calculator. Office Supplies. Dimension: 160.4x164.5x44.2mm. Color White. Dual Power Supply. Aaa Battery With Solar Panel. Inner Concave Buttons. 10 500.00 5,000.00 58 Box Cat5e, Utp Cable, Box ~305mtrs, Pn: 25awg (lan Cable) 2 6,000.00 12,000.00 59 Unit Dual Band Wifi 6 Router Dimensions Wxdxh: - 10.2 × 5.3 ×1.5 In (260.2 × 135.0 × 38.6 Mm) 2 3,000.00 6,000.00 60 Set Heavy Duty 3.5mm Jack Plug Male To 2 Rca Stereo Aux Audio Cable Line, 10 Meters 9 900.00 8,100.00 61 Unit Network Cable Tester Rj45 Rj11 Rj45 Network Lan Ethernet & Networking Tool Network Repair Dimensions: 10cm*5cm*3cm Two Power Supply Methods: 9v Battery & Type-c Charging 2 600.00 1,200.00 62 Piece Offline Mini Compressor (air Compressor Kwv550 9l) 1 4,558.00 4,558.00 63 Piece Presentation Clicker. Slide Deck Presentation 2.4ghz Wireless Usb Ppt Flip Pen Pointer Clicker Presenter With Red Light Remote Control, Color Black 9 900.00 8,100.00 64 Unit Rj45 Crimping Tool Ethernet Network Lan Cable Crimper Cutter Stripper Plier Modular 8p Rj45 And 6p Rj12 Rj11 2 400.00 800.00 65 Unit Usb Headset Headphone With Noise Cancelling, Unidirectional Microphone, Wired Connection Cable Length: 200 Cm, Port: Usb, Speaker Unit: 40mm Hd Driver Frequency Response: 20 Hz - 20 Khz Sensitivity: 105 Db, Impedance: 32 Ohms 16 1,000.00 16,000.00 66 Set Wired Handheld Microphone, 70 Hz → 14 Khz With 10-meter Cord, Anti-interference, Anti-whistling. 2 1,500.00 3,000.00 67 Piece Abrasive Disc Cutter Machine (ssc22 14-inch Cut Off Saw Machine 2200w) 5 7,577.00 37,885.00 68 Unit Electric Angle Grinder. Heavy Duty 4" 1000w Professional Power Tools Grinders Variable-speed 2 2,500.00 5,000.00 69 Piece Electric Heat Gun (shrink Gun With Accessories 2000 W) 5 1,725.00 8,625.00 70 Piece Sewing Machine Electric Built-in 4-step Buttonhole Stitch And 22 Patterns Shuttle Hook System And Front Loading Bobbin Sturdy But Light Aluminum Casting Housing Big Needle Plate With Seam Guide Line, Metal Hook Cover Pressure Regulator Button, Snap-on Presser Feet Stitch Length And Width Dial, Manual Reverse Stitch Button Built-in Led Light, Needle Position At Mid Or Left Drop Feed, Treadle Or Motor Options At Least 1 Year Warranty With After Sales Service 2 20,000.00 40,000.00 71 Piece Sewing Machine (zigzagger) Power：90w, Rated Voltage：220v, Number Of Stiches：23, Automatic Winding. Presser Foot Pressure Adjustable (free Installation) At Least 1 Year Warranty With After Sales Service 1 25,000.00 25,000.00 72 Set Electric Wood Power Planer. Wood Planer For Woodworking. 1200 Watts. 1300 Rpm. 50 Hz. 80mm Wide. With Accessories. With Warranty 2 3,000.00 6,000.00 73 Piece Handheld Rechargeable Pool Vacuum. • Strong Built-in 4v 2ah Ni-mh Rechargeable Batteries Suitable For Use With All Purpose And Above Ground Pools Up To 18 Feet Or 5.49 Meters In Diameter 0.21 Gal (0.8 Liters) Quick Release Transparent Debris Container 12 Gal/min. (45 Liters/minute) Water Suction For Efficient Debris Collection 94 Inches (2.39m) Lightweight Telescoping Aluminum Pole Two Interchangeable Brush Heads Automatic Shut-off Feature When Vacuum Is Not Submerged In Water Ipx8 Waterproof Switch For Added Protection 5-6 Hour Charge Time / 50 Minutes Maximum Running Time Usb Charging Cable Included For Convenient Recharging (plug Not Included) At Least 1 Year Warranty With After Sales Service 2 9,998.00 19,996.00 74 Piece Heavy Duty Automatic Electric Hand Dryer, Color: White Features: Cold And Hot Air Sensing Range: 12 + 3cm Hot Air Temperature: 40c - 54c Action Duration: 40s - 1 Min Water Power Source Voltage: Ac 220v 50/60 Hz Heating Power: 1800w Motor Speed: 2800r / Min At Least 1 Year Warranty With After Sales Service 2 5,000.00 10,000.00 75 Piece Heavy Duty Wood Circular Saw 7" Rated Power Input: 1500w Rated Frequency: 60hz Rated Voltage: 220v No- Load Speed: 5300r / Min Max. Disc Diameter: 185mm At Least 1 Year Warranty With After Sales Service 5 4,104.00 20,520.00 76 Unit Impact Drill 13mm Hammer Electric Drill Heavy Duty 220v Household Power Tools Industrial Screwdriver. 7.5 Amp Copper Motor, 700w, 3300rpm. With Warranty At Least 1 Year Warranty With After Sales Service 2 3,000.00 6,000.00 77 Unit Portable Generator With Electric Start, 10,000 Watt Starting Power & 8,000 Watt Running Power, Large Fuel Tank For Extended Run Time Powerful 420cc Ohv 4-stroke Engine Large 10.5-gallon Fuel Tank For Extended Run Time 120vac / 240vac / 60hz & 12vdc Includes Large 9.5" Wheels (free Installation) At Least 1 Year Warranty With After Sales Service 1 48,000.00 48,000.00 78 Unit Electric Welding Machine. Portable Igbt Inverter Welding Machine (dc Inverter Welding) With Accessories. With 3 Mos. Warranty 500w At Least 1 Year Warranty With After Sales Service 2 7,000.00 14,000.00 79 Piece Adjustable Wrench. Industrial Adjustable Wrench (12") 300mm Made Of High-quality Steel. 2 700.00 1,400.00 80 Set Allen Wrench. Short Arm Hex Allen Key Set With Carbon Steel Material. (1.5 To 6 Mm 7-piece Set) 2 100.00 200.00 81 Piece Anvil (15 Kg) With Steel Mounting Platform 2 12,000.00 24,000.00 82 Set Back Wrench. Set Of Heavy-duty Double Ring Spanner Wrench (metric 28mm - 32mm) Cr-v 2 700.00 1,400.00 83 Piece Ball Peen Hammer (½ Lb (80 Oz) 2 400.00 800.00 84 Piece Carving Chisels For Wood (wood Chisel 4 Piece/set) 2 798.00 1,596.00 85 Piece Chisel Rack For Wood Carving (professional 12-piece Wood Carving Chisel Set With Black Case Sharp Hand Tools For Beginners) 5 1,299.00 6,495.00 86 Set Combination Wrench Tool Set 16piece (8-32mm Professional Dual Purpose 2 700.00 1,400.00 87 Piece Corner Clamp (90-degree Single Swing Jaw Corer Clamp 68 Mm) 5 500.00 2,500.00 88 Piece Cutting Discs For Masonry. 4”-inch Professional Diamond Cutting Disc Continuous Eco For Tile / Ceramic 20 300.00 6,000.00 89 Box Cutting Disc For Steel. Ultra-thin Cutting Disc 4 (25piece) For Stainless 5 2,000.00 10,000.00 90 Set Drill Bits For Wood. 7pc X Long Wood Drill Bit Set 4mm 5mm 6mm 7mm 8mm 10mm 12mm X 300mm Brad Point Auger Drill Bits Wood 5 500.00 2,500.00 91 Set Drill Bits. 13pc Cobalt High Speed Steel Twist Drill Bit Set 1.5mm-6.5mm For Drilling Metal Wood Stainless Steel 5 500.00 2,500.00 92 Set Drill Bits.3-12mm Multifunctional Triangle Glass Metal Drill Bit Set Diamond Ceramic Tile Concrete Brick Wood Punching Hole Drill Bits 5 500.00 2,500.00 93 Piece Files Set For Wood Carving, Craft Metal, And Glass Stone (10-piece Needle File Set For Jewelries) 2 191.00 382.00 94 Piece Geometric Designer Templates (multi -functional Geometric Ruler) 5 118.00 590.00 95 Piece Geometric Shapes Set (wooden Montessori Learning Geometric Building Blocks) 5 1,176.00 5,880.00 96 Set Hacksaw Frame With Blade For Metal 12" 300mm Heavy Duty 3 350.00 1,050.00 97 Piece Hammer For Carpentry. Claw Hammer /16oz 3 300.00 900.00 98 Piece Hard Hat (heavy Duty Safety Helmet With Chin Strap) 3 300.00 900.00 99 Piece Heavy Duty Extension Wire (10-meter Wire: # 162 C, Plug: 15a, 25 V, Maximum Wattage:3750 W., At Least 4 Outlets) 12 1,500.00 18,000.00 100 Piece Heavy Duty Multi- Purpose Bench Vise (8") Mounted On A Steel Platform. 2 10,000.00 20,000.00 101 Set Heavy Duty Pliers. 8" Standard Pliers Cutter Longnose Combinations 8" Pliers 2 500.00 1,000.00 102 Unit Industrial Li-ion Cordless Laser Level 20v (12 Lines) 1pc Black Nylon Stand, 90mm Lift Adjustable; Front And Rear 55mm Adjustable Gap; 1/4″ And 5/8″ Copper Threaded Holes On Bottom; Strong Magnet On Side 1pc Sheet Metal Clip, Wavelength: 520nm Green Light Beam Accuracy: H/v Line ±3mm/10m Laser Intensity: Class Ii, <1mw Self Leveling: 0-4°, Expanded Angle: H&v 360° Max. Working Distance: 30m (without Detector) Maximum Drop Height: 1.5m, Function Mode: 1c, 2c, 3c At Least 1 Year Warranty With After Sales Service 1 15,000.00 15,000.00 103 Piece Jet-bow Beam Compass Drawing Set. The Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 5 1,169.00 5,845.00 104 Piece Level Bar. Aluminum Level Bar With Magnet Heavy Duty 80cm 2 2,000.00 4,000.00 105 Set Magnetic Screwdriver Set Professional Cushion Grip 5 Flat Head And 4 Phillips Tips Screwdriver Non-slip 2 1,000.00 2,000.00 106 Piece Manual Canvas Pliers (industry Line Combination Plier Insulated Pliers) 5 416.00 2,080.00 107 Piece Metric Scale (technical Triangular Scale. Set Of 45, 90 Degrees) 5 1,000.00 5,000.00 108 Piece Mixing Paint Palette (paint Mixing Palette 10 Well Plastic) 2 45.00 90.00 109 Piece Picture Frame And Miter Clamp (90 Degree Right Angle Clip Picture Frame) 5 710.00 3,550.00 110 Piece Plumb Bob / Hulog. With String 350g 2 250.00 500.00 111 Piece Professional Compound Mitre Box & Saw (mitre Box And Box Saw Set 12 Inch) Miter Box Will Handle Stock 7 1/4" High, 8" Wide At 90°, And 5" Wide At 45°. The Saw Can Be Set At Any Angle And Has Automatic Stops For 90°, 45°, And For 5, 6, 8 And 12-sided Frames. 1 1,510.00 1,510.00 112 Set Rachet. Combination Wrench Steel Chrome Vanadium 8-24mm(per Piece) 2 2,500.00 5,000.00 113 Set Ratchet Wrench. 12piece 1/2 1/4 Inch Drive Ratchet Wrench Cr-v Socket Kits Mechanic Spanner Car Motorcycle Repair Tool 2 2,500.00 5,000.00 114 Piece Roofing Square. Dual Marking Right Angle Picture Framing Carpenter Ruler (stainless Steel Angle Ruler Aluminum Alloy Body Heavy Duty Tool) 10 500.00 5,000.00 115 Piece Rubber Mallet (16 Oz) 2 400.00 800.00 116 Piece Screen Print Squeegee (curved Aluminum Handle Squeegee 75) 2 310.00 620.00 117 Piece Staple Gun. Heavy Duty (gun Tacker/ Staple Gun Length-18cm Width -12cm H-3cm, Color- Silver Head T50) 2 2,000.00 4,000.00 118 Piece Steel Tape Measure (tape Measure 8m/20) 5 470.00 2,350.00 119 Piece Styrofoam Cutter (electric Foam Cutter Hot Wire Pen Portable) 1 1,500.00 1,500.00 120 Piece Swimming Pool Leaf Skimmer. Purpose: Used For Cleaning The Swimming Pool And Salvaging Pool Water Garbage. Material: Pp Plastic. Size: 420*280*30mm/16.54*11.02*1.18". 2 376.00 752.00 121 Piece Tape Measure-material: Pvc Centimeter Scale On Reverse Side Which Is Up To 300cm Large, Easy To Read Marking Measures Up To 120 Inches 3 300.00 900.00 122 Piece Toilet Paper Holder (wall Mounted Bathroom Toilet Paper Holder Tissue) 7 300.00 2,100.00 123 Piece Transparent Edge T- Square (hand Tool Inch Metric Ruler 6") 5 535.00 2,675.00 124 Piece Tri Square. High Quality Metal Frame 12" With Clear Markings 2 750.00 1,500.00 125 Piece Water Pipe Wrench 18" Liyabe Tubo Yabe Hand Tools 2 700.00 1,400.00 126 Piece Welding Mask (welding Helmet Auto Darkening Adjustable) 3 1,500.00 4,500.00 127 Piece Welding Protective Visor Glasses, Standard 3 420.00 1,260.00 128 Box Welding Rod Special N-6013 (2.5) (3/32 X 13”) 10kg Per Box 5 2,500.00 12,500.00 129 Piece Wood Carving Set. Carpentry Tools (professional 12/set Manual Wood Carving) 5 1,670.00 8,350.00 130 Set Wood Planer Set -katam. Locally Manufactured 8 Inches 2 500.00 1,000.00 131 Piece Wooden Hand Saw. 18" High Quality Metal Blade With Plastic And Rubber Handle 3 350.00 1,050.00 132 Piece Blender 1.5 Liter Material: Glass Input Voltage:220v Power Consumption:250w Stainless Steel Blade At Least 1 Year Warranty 5 700.00 3,500.00 133 Unit Blender. (9 In1 Food Processor, Good For Chopping, Slicing, Grating, Shredding, Whisking)18x18x38cm At Least 1 Year Warranty 1 3,742.00 3,742.00 134 Piece Bread Toaster (stainless Steel Top Plate) 25x 14.6x16.8cm At Least 1 Year Warranty 2 1,059.00 2,118.00 135 Unit Popcorn Maker/machine - Commercial Heavy Duty Power Supply：~220v 50hz, Power：1.3kw, Weight：21kg Size:560x420x680mm, Box Size：64*49*78cm At Least 1 Year Warranty 1 5,000.00 5,000.00 136 Set Deep Fryer Dimensions (w X H X D) 477 X 318 X 235, Weight 3.81kg Body Material Stainless Steel, Color Silver Power Consumption 2000w, Volume 4 With Temperature Control At Least 1 Year Warranty 2 7,200.00 14,400.00 137 Piece Electric Burger Griddle. Large Size Heavy Duty. Size:73cmx52cmx10cm. Bigger Waster Oil Container. Stainless Steel, Solid Gritty. Food Grade Material. At Least 1 Year Warranty 1 11,475.00 11,475.00 138 Piece Electric Kettle 1.5l At Least 1 Year Warranty 3 1,000.00 3,000.00 139 Unit Electric Rice Cooker 10l At Least 1 Year Warranty 2 5,000.00 10,000.00 140 Piece Electric Stand Mixer 5.5 Liter(1.9kg) With Bowl And 3 Whisk 6 Speed Setting Dough, Rotating Bowl, Speed Control At Least 1 Year Warranty 2 11,500.00 23,000.00 141 Unit Electric Steamer, 10.1-liter Capacity, 1.3 Liters Water Tank Capacity, 3 Layer Transparent And Collapsible Steamer Grids And Trays 90-minute Timer At Least 6months Warranty 1 2,500.00 2,500.00 142 Set Electric Takoyaki Machine And Double Pan 56 Holes Stainless Steel, Size: 437x 435x180mm At Least 6 Months Warranty 5 2,600.00 13,000.00 143 Unit Espresso Machine, 20 Bar Cappuccino Machines For Home, Latte Machine With Automatic Milk Frothier, Coffee Maker With Dual Wall Water Tank: 1300ml Milk Box: 700ml Power:1350w, Supply Voltage:220-240v Rated Frequency:50-60hz Maximum Pressure:20bar Weight:4.9kg, Packaging Weight:6.3kg At Least 1 Year Warranty 1 10,000.00 10,000.00 144 Unit Food Processor, 550watts, 12 Cup Capacity (96 Oz), 3 Processing Speed, Stainless Steel Weight: 6kg, Wxhxd (13in X 21in X 11in) At Least 1 Year Warranty 1 10,000.00 10,000.00 145 Piece Food Warmer Display Cabinet. Commercial Food Heater Glass Display Cabinet Heavy-duty Curved Deli Cabinet With Lighting. Constant Temperature Heating Display Counter Ideal For Fried Chicken Burger And Cooked Food. Size: Red+3 Compartments: 96x45x60cm. Rated Power: 300w. Rated Voltage: 220v.number Of Internal Layers: Three. Layers. Temperature Range: 30-80°c. Product Weight: 18kg. Built-in Energy-saving Warm Color Lamp, Improve The Display Effect At Least 1 Year Warranty 1 9,125.00 9,125.00 146 Piece Gas Range And Oven (1 Turbo, 1 Large Electric, And 2 Medium Burners) 33x42x39.5, (49 Liters) At Least 1 Year Warranty With After Sales Service 1 46,162.00 46,162.00 147 Piece Heavy Duty Electric Grill Machine Rated Power: 1000w Temperature Range: 60-200 Degrees Time Range: 0-30 Minutes Product Size: 380 * 250 * 188mm Material: Stainless Steel At Least 1 Year Warranty With After Sales Service 2 10,000.00 20,000.00 148 Piece Ice Crusher Machine Electric Stainless Steel Heavy Duty Portable Automatic Rotated Speed: 1500rpm Power:250 Size: 275x190x210mm Capacity: 2 Liter At Least 6 Months Warranty With After Sales Service 2 3,900.00 7,800.00 149 Unit Impulse Plastic Sealer Machine Plastic Sealing Machine (100mm | 150mm | 200mm | 250mm | 300 Mm) Weight: 1.06 Kg | 1.4 Kg | 1.3 Kg | 1.3 Kg | 1.58 Kg Size: (item Size) 100mm | 150mm | 200mm | 250mm | 300 Mm Power: 220v Sealing Width: 2 Mm Colour: Transparent Materials: Abs 2 1,500.00 3,000.00 150 Piece Large 18l Capacity Stainless Steel Electric Heating Tea Coffee Water Bucket Commercial Insulated Bucket Heating Barrel Boiled Water Bucket Material: Stainless Steel Adjustable Temperature：30-110° Rated Voltage：220v/50hz 2 3,000.00 6,000.00 151 Piece Meat Slicer (electric Machine Stainless Steel) 418x 293x 325mm 2 2,494.00 4,988.00 152 Piece Mechanical Microwave Oven (countertop,20 Liters) 700w- 1200w 1 5,075.00 5,075.00 153 Piece Oven. Four Plates Oven For Bread (stainless Steel) 530x595x570mm. Lpg Type At Least 1 Year Warranty With After Sales Service 1 48,924.00 48,924.00 154 Piece Portable And Foldable Charcoal Barbeque Bbq Grill 25"x30"x27" 1 4,000.00 4,000.00 155 Unit Rice Cooker Standard 2l Home Multifunctional Home Cooking 220v. Fast Cooking, Keep Warm Function, Non-stick Coating, Stainless Steel Cover. Input Voltage. 220v. Power Consumption 400w. Volume Capacity 2l Dimension (l X W X H) 215*215*215 At Least 1 Year Warranty 2 2,500.00 5,000.00 156 Piece Waffle Iron Pan 4 Interchangeable Plates 750 Watts At Least 1 Year Warranty 5 1,800.00 9,000.00 157 Piece Baguette Bake Mold Pan 34.5 Cmx 24cm (6cm Molder) Nonstick At Least 1 Year Warranty 10 399.00 3,990.00 158 Piece Bakery Display Rack (estante). Made Of Glass And Aluminum Frame. 4 Layer Of Glass (transparent) Or Acrylic With Partition. Rubber Wheels With Lock. At Least 2ftx 5ftx 4 Ft 1 40,000.00 40,000.00 159 Piece Baking Sheet 11x15 Inches 011 Thickness Heavy Duty Aluminum 10 360.00 3,600.00 160 Piece Baking Tray, Small (stainless Steel; Size Details: 23cm X 17cm) 8 258.00 2,064.00 161 Piece Baking/ Pastry Brush, Heat Resistant, Standard Size 10 35.00 350.00 162 Piece Blue Cutting Board (raw Fish)25.5cmx34cm, Plastic 5 460.00 2,300.00 163 Piece Boning Knife (stainless Steel) 24.4cm X 1.9cm X 1.7cm 3 492.00 1,476.00 164 Piece Bowl (serving Bowls, Clear Glass 20 Cm Diameter) 6 150.00 900.00 165 Piece Bread Plates (stainless Steel) 40x 60cm 20 1,027.00 20,540.00 166 Piece Bread Rack (stainless Steel)15 Layers 40x60cm Heavy Duty 1 20,000.00 20,000.00 167 Piece Bread Rack. Made Of 12 Mm Steel. 24"x5ftx5ft. Can Hold Up To 10 Trays (lagayan Ng Plantsa Ng Tinapay) 1 10,000.00 10,000.00 168 Piece Brown Cutting Board (raw Crops) 25.5cmx34cm, Plastic 5 460.00 2,300.00 169 Set Cake Decorating Kit. Piping Tips Set ( Stainless Steel,multicolor) 5 279.00 1,395.00 170 Piece Can Opener (stainless Steel Blade; Length: 17cm High) 4 500.00 2,000.00 171 Piece Carving Fork (stainless Steel; Size: 13 Inches Long) 3 162.00 486.00 172 Piece Casserole, Medium (stainless Steel: 3.9 Liter; Size: 12.5cm X 20cm) 4 689.00 2,756.00 173 Piece Casserole, Small (stainless Steel: 2.1 Liter; Size: 12cm X 15cm) 4 599.00 2,396.00 174 Piece Cast Iron Pots And Pans (ceramic, Non-stick) 21.85x 13.19x12.80inch 3 7,180.00 21,540.00 175 Piece Cheese Cloth (made From Cotton) 101 X 270cm 10 223.00 2,230.00 176 Piece Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant, Size: Large 20 450.00 9,000.00 177 Piece Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant, Size: Medium 20 450.00 9,000.00 178 Piece Chef’s Apron. Black Apron With 2 Large Pockets Adjustable Apron Halter Neck Unisex Dirt And Stain Resistant, Size: Small 20 450.00 9,000.00 179 Piece Chef’s Hat/cap For Men & Women, Breathable Hat Color White Fast Food Restaurant Coffee Shop Work Wear, Size: Large 20 250.00 5,000.00 180 Piece Chef’s Hat/cap For Men & Women, Breathable Hat Color White Fast Food Restaurant Coffee Shop Work Wear, Size: Medium 20 250.00 5,000.00 181 Piece Chef’s Hat/cap For Men & Women, Breathable Hat Color White Fast Food Restaurant Coffee Shop Work Wear, Size: Small 20 250.00 5,000.00 182 Piece Chef's Knife (stainless Steel) 33cm X 4.5cm X 2cm 3 750.00 2,250.00 183 Piece Cleaver Knife (stainless Steel) 7 Inches Or 2.5mm 3 1,074.00 3,222.00 184 Piece Colander, Medium (stainless Steel; Size: 28cm X 22cm) 3 298.00 894.00 185 Piece Colander, Small (stainless Steel; Size: 24cm X 22cm) 3 204.00 612.00 186 Piece Cookery Cabinets (made With Carbon Steel 5 Layers, Size: H: 144cm, W: 55cm) 1 3,621.00 3,621.00 187 Piece Cookie Press - Stainless Steel With 13 Disc And 8 Icing Tips, Dimension: 25x 14.5cm 3 462.00 1,386.00 188 Piece Cooler, 2.5ft X 2.5 Ft X 3ft Plastic, With Good Insulation 1 3,000.00 3,000.00 189 Piece Core Seed Remover (stainless Steel; Approx: 1.4x21.5cm) 4 229.00 916.00 190 Piece Cupcake Molder Tray Of 6 12 Holes Baking Pan Muffin Cup Cake 10 89.00 890.00 191 Piece Cutting Board (material: Bamboo; Size: 34x24x1.8cm/750g) 4 209.00 836.00 192 Piece Deep Fry Thermometer, Oil Temperature Gauge 3 320.00 960.00 193 Piece Digital Kitchen Thermometer (cooking/food Temperature; Size 34mm X 270mm) 3 486.00 1,458.00 194 Piece Double Boiler, Medium (stainless Steel; Size: 27x14x6cm) 1 389.00 389.00 195 Piece Dough Roller Pin, Wooden. 29.5cm Non-stick Silicone Rolling Pin Pastry Baking Decorating Tool 6 300.00 1,800.00 196 Piece Dough Scraper (stainless Steel) 16x12x2cm 3 178.00 534.00 197 Set Drinking Glass 10 Oz Tall Clear Tumbler Set Of 6 (dimensions: Lengthxheight: 5.5cmx12 Cm) 6 510.00 3,060.00 198 Piece Filling Funnel (stainless Steel) Upper Diameter: 10.5cm, Lower Diameter: 3.7cm, Height: 4.5cm 4 212.00 848.00 199 Piece Food Grade Silicone High Temperature Resistant Baking Mat Oven Baking (to Match Baking Pan), Browns Silicone Baking Oven Mat Liner, Non-stick For Pastry Cookies Dough 12 90.00 1,080.00 200 Piece Fruit Juicer, Standard Type 3 1,500.00 4,500.00 201 Piece Frying Pan, Large (scratch Resistant And Non-stick; Size: 28cm) 4 578.00 2,312.00 202 Piece Frying Pan, Medium (scratch Resistant And Non-stick; Size: 24cm) 4 380.00 1,520.00 203 Piece Frying Pan, Small (scratch Resistant And Non-stick; Size: 20cm ) 4 233.00 932.00 204 Piece Funnel (stainless Steel) 22x14.5cm 3 715.00 2,145.00 205 Piece Glass Rack (plastic-coated Metal; Capacity: 24piece Glass; Dimension: L:52cm; W: 36cm; H:8cm) 2 461.00 922.00 206 Set Glasses. Dining Glasses (6piece. Thick Clear Glass: W: 3inches And H: 4inches) 5 265.00 1,325.00 207 Piece Green Cutting Board (for Fruits And Vege)25.5cmx34cm, Plastic 5 460.00 2,300.00 208 Piece Hair Net. Unisex Hair Net Cap Hair Mesh Weaving Wig Cap Hair Styling Tools Nylon Hair Nets Hollow Out High. Black 300 30.00 9,000.00 209 Piece Hand Mixer (stainless Steel Bowl) 270x165x290mm, 2.8 Liters Capacity 3 1,755.00 5,265.00 210 Piece Ice Cream Scoop (stainless Steel) Diameter: 4.5cm, Length: 18cm 6 208.00 1,248.00 211 Piece Kitchen Carts (2 Layer Stainless Steel Carts With Two Brake Wheels; Size: 400mm X 500mm X 860mm) 2 3,019.00 6,038.00 212 Piece Kitchen Fork (stainless Steel; Size: 7cmx4cmx21cm) 5 72.00 360.00 213 Piece Kitchen Scale Food (manual) 5 Kilogram 2 300.00 600.00 214 Piece Kitchen Spoon (stainless Steel; Size: 8cmx6.5cmx21cm) 5 86.00 430.00 215 Piece Kitchen Spoon, Slotted (material: Plastic; Size: 7x3x43cm) 5 289.00 1,445.00 216 Piece Large Wooden Turner For Large Oven. Kitchen Turner Flat Spatula Scraper, Acacia Wood 10.5 Inches Long And 2.75 Inches Turner 3 200.00 600.00 217 Piece Lpg Tank 11kg 4 4,500.00 18,000.00 218 Set Measuring Cup. Measuring Cup Sizes: 1 Cup (250ml). 1/2 Cup (125ml). 1/4 Cup (60ml) ; 1/8 Cup (30ml). Materials. Plastic (abs) 3 500.00 1,500.00 219 Set Measuring Spoon 1tbsp 15ml, 1/2tbsp 7.5ml, 1tsp 5ml, 1/2tsp 2.5m Material: Stainless Steel 3 400.00 1,200.00 220 Piece Meat Thermometer, Brifit Waterproof Kitchen Meat Thermometer, Foldable Digital Instant Read Food Thermometer 3 400.00 1,200.00 221 Piece Medium Graters (stainless Steel) 18/8 2 430.00 860.00 222 Piece Mixing Bowl: 30 Cm L30xw27.5xh11.4 Cm Thickness: 0.04 Cm. Material: Stainless Steel 10 900.00 9,000.00 223 Piece Muffin Pan Non-stick Dimension: 26.5x35x3cm, Capacity: 12 Cup, Color: Black Non-stick Surface For Easy Release And Quick Cleanup Dishwasher Safe, Ideal For Baking Muffins, Cupcakes Nonstick Coating Helps Ensure Effortless Food Release 5 700.00 3,500.00 224 Piece Muti-function Vegetable Fruit Peeler Slicer Cutter Chopper (material: Abs + Stainless Steel) 4 429.00 1,716.00 225 Piece Muti-purpose Kitchen Scissors/ Shears (scissors Length: 21.5cm; Blade Length: 10cm; Handle Length: 11.5cm; Handle Width: 9.5cm; Blade Thickness: 0.4cm Weight: 200grams) 8 500.00 4,000.00 226 Piece Oven Thermometer 3 389.00 1,167.00 227 Piece Oysters Knife (stainless Steel) 15.5com X 6.5cm X 3cm 3 187.00 561.00 228 Piece Parisienne Scoop (stainless Steel Blade With Plastic Handle) Scoop Diameter: 30mm And 27mm; Total Length: 170mm 3 216.00 648.00 229 Piece Pastry Tubes (stainless Steel) 3cm X 3cm X 6.1cm 8 142.00 1,136.00 230 Piece Pepper And Salt Grinder (made With Stainless Steel, Glass, And Ceramic) Approx. 19x6.5cm 6 296.00 1,776.00 231 Piece Piping Bag (disposable Bag Size: 24.5cm X 17cm) 50 208.00 10,400.00 232 Piece Pitcher (durable Crystal-clear Glass 1.5l) 6 300.00 1,800.00 233 Piece Place Mat (table Placemat Pvc Anti-slip Placemat Wasahble Durable Kitchen S:30x45cm) 10 250.00 2,500.00 234 Piece Plastic Containers, Microwavable Round Canister, Food Storage Container (400 Ml) 40 20.00 800.00 235 Piece Plastic Measuring Pitcher Jug With Measurement(set) Maximum Of 1 Liter 3 126.00 378.00 236 Set Plastic Silverware Or Real Silverware (stainless Steel; 18piece Utensils Set Includes: 6 Dinner Fork, 6 Dinner Spoons And 6 Dinner Teaspoons) 2 415.00 830.00 237 Piece Plate Rack (stainless Steel; Size: 30cmx22.8cmx12.9cm) 3 492.00 1,476.00 238 Dozen Plates (12 Piece Plates 8-inch Melamine White) 6 700.00 4,200.00 239 Piece Pot Holder, Basahan Bilog 6 Inches Diameter 12 15.00 180.00 240 Piece Potato Masher With Soft Grip Handle (stainless Steel) 9.5x27x8cm 2 357.00 714.00 241 Piece Pressure Cooker 3.5 Liter 2 1,200.00 2,400.00 242 Piece Red Cutting Board (raw Meat)25.5cmx34cm, Plastic 5 460.00 2,300.00 243 Piece Revolving Cake Stands (aluminum)12 Inches 5 850.00 4,250.00 244 Piece Rolling Pin Stainless Steel Pressing Stick Pizza Dough Non-stick Dough Roller, (29.5 Cm) 6 300.00 1,800.00 245 Piece Round Cake Molder 4, 6, 8 Inches Set 5 161.00 805.00 246 Piece Scraper(rubber) 30cm X11cmx6.8cm 5 130.00 650.00 247 Piece Serving Bread Tray (stainless Steel) 45cmx2.8cm 6 1,229.00 7,374.00 248 Piece Serving Spoon (heavy-duty Stainless Steel) Length: 22.5cm; Width: 6cm 24 102.00 2,448.00 249 Piece Siever, Small (stainless Steel) 14 Cm 3 188.00 564.00 250 Piece Skimmer, Fine (stainless Steel) 7.3cm X 5cm X 21.5cm 3 160.00 480.00 251 Piece Skimmers, Spider (stainless Steel) Handle: 14; Radius: 20 3 115.00 345.00 252 Set Small Plate / Saucers (ceramic With Size: 6 Inches And 6piece Per Set) 2 150.00 300.00 253 Piece Soup Cup Rack (2 Layered Rack; Size: 35 X 25 X 28cm) 3 899.00 2,697.00 254 Piece Soup Ladle, 12 Oz (stainless Steel And Wooden Handle: 15 X 51 Cm) 5 360.00 1,800.00 255 Piece Soup Ladle, 4 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 5 124.00 620.00 256 Piece Soup Ladle, 6 Oz (stainless Steel; Size: 7.5cm X 30 Cm) 5 194.00 970.00 257 Piece Soup Ladle, 8 Oz (stainless Steel And Wooden Handle: 10 X 51 Cm) 5 290.00 1,450.00 258 Piece Spatula (silicon) 27.2 X 5.5 X 1.5cm 3 169.00 507.00 259 Piece Square Cake Molder 9, 11, 13 Inches Set 5 160.00 800.00 260 Set Stainless Icing Tip (set-12piece) Cake Decorating Kit Stainless. Icing Piping Nozzles Pastry Tips Cake. 10 499.00 4,990.00 261 Unit Steamer. 3 Layer Steamer 34cm Stainless Steel Cooking Pots Cookware Steam High Quality 2 6,499.00 12,998.00 262 Piece Stock Pot, Big (with Glass Cover; Size: 34.5 X 27.9 Cm X 16.6 Cm) 2 798.00 1,596.00 263 Piece Strainer, Chinois, Small (stainless Steel) 16cm Handle: 5.5inches 3 198.00 594.00 264 Piece Strainer, Medium, Fine (stainless Steel) Diameter:16cm; Length: 30.5cm; Depth: 5.9cm 3 180.00 540.00 265 Piece Strainer, Small, Fine (stainless Steel) Diameter:14cm; Length: 29cm; Depth: 5.5cm 3 160.00 480.00 266 Set Teacups (ceramic White; Capacity: 250ml) (6piece. /set) 2 400.00 800.00 267 Piece Tenderizer (pin Tenderizer) Stainless Steel Diameter: 5cm, Height: 19cm 3 119.00 357.00 268 Piece Tenderizer Mallet. (tenderizer) Stainless Steel 12.6 Inches X 11.5x4cm 3 240.00 720.00 269 Piece Tongs (stainless Steel) 12 Inches 4 179.00 716.00 270 Piece Tongs (stainless Steel) 9 Inches 4 110.00 440.00 271 Piece Turner (stainless) Dimension: 34.5 X 9.8 X 4.4 Cm 3 280.00 840.00 272 Piece Utility Tray (stainless Steel: Stain Resistant; Size: 45cm X 35cm X 4.8cm) 12 189.00 2,268.00 273 Piece Weighing Scale Digital. Display Mode: Led/lcd+light . Weighing Range :40kg. Accuracy: 2g. Product Size: 35x33x14cm 3 Lcd Display On The Operator’s Side Of The Scale As Well As 3 Lcd Display On The Customer’s Side. Minimum Capacity Is 2g. Maximum Capacity Is 40kg Power Source: Built In Rechargeable Battery With Usb Cable Battery Powered Or Connect Usb Cable. Battery Powered Or Connect Usb Cable To Use Weight Platform/tray Material Is Stainless Steel. 1 5,000.00 5,000.00 274 Piece White Cutting Board (for Bread And Pastry) 25.5cmx34cm, Plastic 5 460.00 2,300.00 275 Piece Wire Skimmer, Small (stainless Steel) Handle: 14; Radius: 14 3 105.00 315.00 276 Piece Wire Whisk - Length: 30 Cm (12 ") Material Stainless Steel 4 320.00 1,280.00 277 Piece Wire Whisk, Heavy Duty (stainless Steel+plastic Handle; 14 Inches) 4 258.00 1,032.00 278 Piece Wire Whisk, Medium (stainless Steel+plastic Handle; 10.2 Inches) 4 189.00 756.00 279 Piece Wok, Medium (nonstick Carbon Steel; Size: 36cm) 1 401.00 401.00 280 Piece Wok, Small (nonstick Carbon Steel; Size: 32cm) 4 389.00 1,556.00 281 Piece Wooden Spatula 9cm Sandok, 34 Cm Long 4 65.00 260.00 282 Piece Wooden Spoon (made With Beech Wood 10cm X 34cm X 2cm) 6 244.00 1,464.00 283 Piece Wooden Turner, Wooden Sandok Kitchen Spatula Spoon Turner Cooking, 3" Width Of Sandok, 10" Long 4 65.00 260.00 284 Piece Yellow Cutting Board (cooked Meat) 25.5cmx34cm, Plastic 5 460.00 2,300.00 285 Piece Zester (stainless Steel) Length: 30cm/11.81 Inches 3 268.00 804.00 286 Set 4 Inflatable Tools/ Speech Therapy Tools Package, Blowing Flute/pin Wheel Whistle, Made Of Plastic 20 150.00 3,000.00 287 Set Adl Board - 6 Colors, 6 Different Dressing Skills Training. A Quiet Skill Book Made Of Cardboard And Non- Woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds" 10 700.00 7,000.00 288 Unit Balance Board- Balance Board Type: Rocker Board Dimensions: 32.28 X 11.81 X 0.59 Inches Weight Capacity: 100 Kg Material: Beech Wood Anti-skid Feature: Not Specified 3 3,700.00 11,100.00 289 Set Balance Steppingstone/balancing Coordination Obstacle Course Therapy (specs: Good For 20-40kls, Assorted Color) 1 3,000.00 3,000.00 290 Piece Core Peak Bolsters- An All-purpose Positioning Aid • Provides Support Under The Legs, Arms, Feet, And Other Areas Of The Body. Fits Standard Treatment Tables • 18" In Length With At Least 6" In Diameter. 2 9,006.00 18,012.00 291 Set Dry Erase Sleeves. Reusable Dry Erase Pockets. Colors: Blue, Pink, Yellow, Red, Green, Purple. Size: 25.5*35.5cm(1piece). Quantity: 12piece Package Including: 6 X Dry Erase Pockets 6 Pens 10 796.00 7,960.00 292 Unit Electrical Stimulator. Multiple Mode Electrical Stimulator-1 Second Measuring Time. 3 Color Backlight Fever Reminders Auto Shut Off At 18 Seconds Store 50 Sets Of Data. Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. At Least 1 Year Warranty With After Sales Service 2 9,884.00 19,768.00 293 Unit Exercise Steps-aerobic Step Board 69 X 28 X 15cm. Dimension: 69 X 28 X 15cm Length: 27" Width: 10.5" Adjustable Height Up To 10cm To 15cm. Offers A Secure, Nonslip Surface For Your Workout Routine, Nonskid, Feet Provide Stability & Protect Floors. 5 1,934.00 9,670.00 294 Piece Foot Reflexology Machine Power Source:220 – 240v; Power Consumption: 50w; Dimensions (l X W X H) :410mm X 390mm X261mm At Least 1 Year Warranty With After Sales Service 2 25,000.00 50,000.00 295 Piece Gait Belt-1x Transfer Gait Belt Measurement Length: 60 Inches, Width: 2 Inches 3 1,458.00 4,374.00 296 Packs Ice Massage Caps- Size: 2 Count (pack Of 1) Measuring 2.9” In Diameter, The Ice Cup Massager Holder Also Fits Comfortably In The Hand. Material: Polyethylene 10 700.00 7,000.00 297 Piece Interlocking Rubber Mat-size 1x1 Meter X 25 Mm Color Red, Hardness: 55 To 60 Shore, High Density 38 1,750.00 66,500.00 298 Piece Kinesiology Tape-ultra-strong And Sticky-hypoallergenic Adhesive Water Resistant. 97% Cotton, 3% Nylon. 180% Stretch For Full Range Of Motion Latex And Zinc Free Sticks 2-7 Days 5-10 Applications Per Roll Each Is 2""x 16.4"" (5cmx5cm) 10 2,100.00 21,000.00 299 Set Medicine Ball, Set Contains 6lb, 8lb, 10lb, And 15lb Medicine Balls. Medicine Ball Exercise Ball Workout Dumbbell Set Slam Ball 1 4,000.00 4,000.00 300 Piece Mobilization Belts And Devices- Size 8 Feet Specific Uses For Product. Use For Legs, Hips, Arms, Back, Whole Body - High-quality Nylon Mobilization Belt Features A Plastic Side-release Buckle And Is Designed For Durability And Patient Safety. 3 2,850.00 8,550.00 301 Unit Paraffin Bath- Large Opening Design: Inner Pot Allows For Hands, Feet, And Elbows To Be Dipped Into The Melted Wax. Alloy Heating Pot Melts Paraffin Wax Blocks In 0.5 Hours. Adjustable Heating Ranges From 86-158°f. Timer: Settable From 1 To 99 Minutes. Free Installation At Least 1 Year Warranty With After Sales Service 1 32,340.00 32,340.00 302 Piece Pool Noodles 60 Inch 2 300.00 600.00 303 Piece Pull Buoy Swim Training Leg Float 2 600.00 1,200.00 304 Piece Quad Cane -stable Structure, Material: Stainless Steel, Abs Non-slip Handle, Ergonomic Design, Comfortable Grip. Spring Button For Easy Height Adjustment. Firm Lock Hoop To Stabilize The Body. 2 2,740.00 5,480.00 305 Set Reflex Hammer-features: Pointed Babinski-style Tip Zinc Alloy Comfortable Handle Grip Control, Hammer For High Elastic Pvc Rubber Material: Zinc Alloy + Pvc; Color: Black Package Size: 27*11*3.5cm/10.6*4.3*1.3-inch Package Weight: 140g/4.9oz. 1 8,100.00 8,100.00 306 Piece Rocker Boards. Dimensions: 28 X 28 Inches, 7 Inches Height; Materials: European Birch Plywood, Water-based Finish With Slip-resistant Rug; Hold Up To 85 Kilos. 5 9,900.00 49,500.00 307 Piece Round Bolsters-weight：0-0.5 Kg Shape: Column, Feature: Memory, Filling: Microfiber Material:100% Fiber, Size:8" X 36", Color: White Ideal For Hugging, Cylindrical Pillow, Great For Side Sleepers. 2 1,760.00 3,520.00 308 Set Rubber Mat (specs: 30x30cm,36 Piece.) 2 500.00 1,000.00 309 Piece Scooter Boards. 12" X 12" Heavy Duty Plastic Board, Non-marring Double Ball-bearing Swivel Casters And Molded Plastic Built-in Handles On Each Side, Holds Up To 150 Lbs. 2 24,990.00 49,980.00 310 Piece Sensory Cushion: Circular Shape, Rubberized. Size: 35cm X 5.5cm. Free Air Pump Pin, (red, Blue, Violet, Ot Pink) Tactile For Balance And Motor Coordination Fidget Massage Yoga Training Exercise 2 1,100.00 2,200.00 311 Set Sensory Floor Tiles 6pc Sensory Stimulation Walk Crawl Massage (specs: Rubber 1ft X 1ft Per Tile, Assorted Color) 2 2,000.00 4,000.00 312 Piece Slant Board. 12" X 16”, Adjustable Angles (20 To 32 Degrees), With Heavy-duty Metal Clip 5 4,500.00 22,500.00 313 Set Splinting Materials- Rescue Padded Board Splint. 6 Paddes Wood Splint (different Sizes) Sizes: 35"", 25"" And 15". Velcro Straps Color: Blue. 10 4,200.00 42,000.00 314 Set Stationary Bike. Spin Bike Exercise Bike Fitness Home Equipment Spinning Bike Fitness Bike. With Digital Information, Free Installation. Stationary Bike-flywheel Resistance Is 18 Kg./20kg. Maximum Bearing Capacity 300 Kg. 6 49,990.00 299,940.00 315 Unit Step Stools- Step Stools Double Steel Caravan Step. Rubber Non- Slip Steps. Leg Distance Front To Back 65 Cm. Width 42 Cm. Top Step Height 38 Cm. Bottom Step 20 Cm. 2 3,600.00 7,200.00 316 Set Theraband -4 Resistance Levels, Including Yellow, Red, Green, And Blue Supplied In Lay Flat Length Of 8", 12" And 18" Latex Rubber Weight Level: Yellow: 3 Lbs-4.3 Lbs Red: 3.7 Lbs-5.5 Lbs Green: 4.6 Lbs-6.7 Lbs Blue: 5.8 Lbs-8.6 Lbs 3 10,100.00 30,300.00 317 Unit Therapist Stools On Wheels-adjustable Height Of 19 - 24". It Comes With A 3" Hi-density Cushion With Multi-layered Padding, And A 14" Seat Diameter. Built With 5 Casters Made Of Plastic Easy To Clean. Color: Black 2 4,950.00 9,900.00 318 Piece Therapy Putty. Set Of Four Colors. Finger Training Putty Like Squeeze, Pinch, Stretch And Twist. Decompression Toy Mud Grip Hand Strengthening Exercise 8 Grams Putty, 4.5cmx7cm Plastic Container 40 300.00 12,000.00 319 Set Trampoline With Handrails 40-inch Jumping Surface Area, Handrail Adjusts From 28.5"" To 36.5""h 16lbs. Holds Up To 300 Lbs At Least 1 Year Warranty With After Sales Service 2 11,580.00 23,160.00 320 Set Treadmill. Heavy Duty Electric 139cm Long Portable Treadmill With Digital Indicators Like Timer And Speed Selector. Free Installation. At Least 1 Year Warranty With After Sales Service 4 49,950.00 199,800.00 321 Unit Tumble Barrels-inside Diameter: 18"-24”, Outside Diameter: 24", Weight: 250lbs. (free Installation) At Least 1 Year Warranty With After Sales Service 1 40,695.00 40,695.00 322 Set Vestibular Balls- (3 Pieces) Material: Synthetic Material Size: 55.0 / 65.0 / 75.0 Cm. Weight: 1100.0 / 1400.0 / 1700.0 G. Color: Violet / Blue / Black 1 6,460.00 6,460.00 323 Piece Vestibular Ball-size 45-90 Cm Pvc Material, Anti-burst And Non-slip Bearing 200 Kg., Color Blue, Weight 900 G. 2 800.00 1,600.00 324 Piece Wedge Bolsters- A Firm And Breathable Bed Wedge Pillow Stays Cool, And Its Measurements Are 25″l X 25″w X 12″h Inches. / Breathable & Washable Cover / Designed To Provide Higher Body Support. 2 6,998.00 13,996.00 325 Piece Weighted Vest. Breathable Cotton Denim; Removable ¼-pound Weights; Chest 28"-30", Shoulder-to-waist 16", Includes 8 Weights (¼ Lb Each) 5 3,500.00 17,500.00 326 Piece Wheelchair Sports. Materials: Lightweight Aluminum Frame: Pneumatic Wheels; Padded Seat; Built-in Back Wheel Casters For Stability; Wheelchair Width Including Wheels: 62cm Wheelchair Seat Width: 38cm; Wheel Diameter: 60cm; Seat Depth: 36cm; Backrest Height: 28cm; Weight Capacity: 100kg 9 40,000.00 360,000.00 327 Piece Wheelchair Standard Heavy Duty Foldable (spes: Folded Dimension:95x86x29cm; Seat Width:49cm; Aluminum Footrest, Fixed Arm Rest And Leg Rest, Front 8" Pvc Castor Wheels, Rear 24" Pu Spoke Wheels) 10 6,000.00 60,000.00 328 Piece Wheelchair- Front Wheel Size: 6 Inches Net Weight Of All Aluminum Alloy Frame: 11kg, Net Weight: 11kg Expanded Size: (82x58x87 In Cm), Seat Depth: 38cm Rear Wheel Size: 16 Inches, Back Height: 42cm, Seat Width: 45cm Folded Size:(70x25x72 In Cm), Handrail Spacing: 55cm 3 7,000.00 21,000.00 329 Piece Wiggle Cushion (inflatable) With Hand Pump. Diameter 10.75" / 27 Cm, One Side Features Flexible Nubs, Other Has Smaller Bumps. 5 1,500.00 7,500.00 330 Set Wooden Hammering Ball (specs: 4 Balls Red,blue,green,yellow; 1 Hammer; 1 Bench) 5 300.00 1,500.00 331 Piece Aqua Dumbbells Large (6"x12.5") Thickness:4" 2 500.00 1,000.00 332 Piece Aqua Dumbbells Medium (6"x10.5") Thickness:3" 2 500.00 1,000.00 333 Piece Aqua Dumbbells Small (6"x8") Thickness:2" 2 500.00 1,000.00 334 Set Dumbbells Sets- Weight: 37kg With Rack Type: Medical Rehabilitation Equipment, Total 18 Dumbbells 1 Lb / Piece, 2 Pieces 2 Lbs / Piece, 4 Pieces 3 Lbs / Piece, 4 Pieces 4 Lbs / Piece, 4 Pieces 5 Lbs / Piece, 4 Pieces 1 25,000.00 25,000.00 335 Unit Augmentative Communication Systems. Package Dimensions 9.13 X 3.03 X 1.1 Inches Batteries 2 Aaa Batteries Required. (included) Preprogrammed Commands Wide Variety- Travel Bag- Aac Device 10 3,702.00 37,020.00 336 Unit Call Lights. Receiver Working Voltage: 110-260v Transmitter Battery: 12v 23a Alkaline Battery Working Distance: 1000 Feet In Open Area. 3 Receivers, 2 Transmitters. 2 X Double-sided Tape. 1 X User Manual. 2 X 12v 23a Batteries. 10 1,536.00 15,360.00 337 Piece Chewy Tubes Are Innovative Oral Motor Devices Designed To Provide A Resilient, Nonfood, Chewable Surface For Practicing Biting And Chewing Skills. Material: Thermos Elastic Polymer, 8cm Long Hollow Stem And 6cm Wide Top 50 200.00 10,000.00 338 Box Wooden Tongue Depressor Sterile (sure-guard). Disposable (lxw) 120-160mmx14-18mm, Thickness:1.8-2.2mm, Singleuse,nonsterile 10 200.00 2,000.00 339 Unit Blood Pressure-blood Pressure Monitor Type: Upper-arm Monitor Type: Digital Cuff Size: 32cm Dimension (w X H X D): 145 X 466 X 145mm Weight: 250g Power Supply: Battery Type: Li-polymer Smart App Availability: Yes Automatic Shut Off: 1 6,560.00 6,560.00 340 Unit Stethoscope: Dual Tube Stethoscope Weight: 185g, Length: 80cm Product Material: Polymer Diaphragm, Listener Material: High-density Stainless Steel Product Composition: Ear Tip, Ear Hooks, Leaf Spring, Hose Heads, Diaphragms 1 1,380.00 1,380.00 341 Piece Thermometer- Body Temperature Measurement: 34.0-42.9°c / 93.2-109.2°f. Material: Abs Plastic. Accuracy: (+/-)0.2°c. Auto-shutdown Time: About 18s Power Supply: 2 * 1.5v Aaa Batteries 1 Year Warranty 5 1,600.00 8,000.00 342 Piece Braille Contraction Pamphlet. Unified Contraction Pamphlet 4"x6". 25 600.00 15,000.00 343 Piece Braille Slate. 27 Lines, 30 Cells Per Row, Black 25 1,000.00 25,000.00 344 Piece Braille Stylus. Round Or Y Shape 25 200.00 5,000.00 345 Set Chess Board For Blind. Plastic Pieces With Special Markings, Board With Pattern To Distinguish White And Black Squares With Slots To Hold The Pieces. At Least 12"x24" Plastic Board. 4 5,000.00 20,000.00 346 Set Communication Boards. Measures 9"x7.5". Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut. 10 6,172.00 61,720.00 347 Piece Contraction Pamphlet. Nemeth Code. 4"x6". 25 600.00 15,000.00 348 Piece Cranmer Abacus 25 650.00 16,250.00 349 Box Fidgets. Contain A Variety Of Quiet Devices That You Can Roll, Pop, Zip, And Squeeze 5 1,800.00 9,000.00 350 Set Geometric Measurement. Set Of Protractor, Ruler And Triangles Made Of Plastic With Embossed Marking For The Blind, Standard Size. 15 1,000.00 15,000.00 351 Set Goniometers- Protractor Goniometer With 360 Degrees Coverage To Measure Joint And Compare The Changes In Joint Angles Material: Clear Plastic 3 Goniometer: 12-inch, 8 Inch And 6 Inches 2 600.00 1,200.00 352 Piece Hand Dynamometer - Hand Dynamometer Type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79"" 1 1,900.00 1,900.00 353 Set Jaw Exercisers, Reusable Speech Therapy Tools- Color: Red, Packing Single Loaded, Function: Teether, Material: Silicone, Shape: Tube, Material Feature: Bpa Free, Item Code: 759057460, Category: Soothers & Teethers 10 650.00 6,500.00 354 Set Jaw Grading Bite Blocks- Color: Purple, Brand: Talktools, Item Weight: 0.16 Kilograms, Shape: Teething Block 20 350.00 7,000.00 355 Unit Pediatric Walker - 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Total Height: 75-90cm Side Wheel Width: 70cm. Front And Rear Track Width: 75cm. Left And Right Wheel Track: 40cm Suitable Height: 85-120cm. Weight: About 12kg 2 17,998.00 35,996.00 356 Piece Pediatric Walker- Height-adjustable Frame Sizes. 360-degree Swivel Front Casters For Versatile And Flexible Mobility. Foot-operating Locking Mechanism On Front Casters. Rubber Tire Design 3 13,200.00 39,600.00 357 Set Phonics Phones. Specifications - Each Pack Includes Two Durable Whisper Phones, One In Vibrant Blue And One In Eye-catching Red. 10 536.00 5,360.00 358 Set Scrabble Board For Blind. Made Of Plastic With Special Markings On Tiles And Board. At Least 18"x18" Board. 5 4,000.00 20,000.00 359 Piece Small Silicone Food Tongs/tweezer For Kids (specs: 5-6 Inches Long, Assorted Color, Silicone Or Plastic) 10 100.00 1,000.00 360 Piece Walking Cane-adjustable Aluminum Cane With Wooden Handle, Anodized Finish, And Rubber Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 2 1,320.00 2,640.00 361 Piece White Cane For Adults- Foldable Aluminum With White Anodized Finish And Plastic Tip. The Tube Has A Spring Lock Pin For Adjusting Handle Height From 58-94 Cm. 20 1,500.00 30,000.00 362 Set Articulation Cards. Genre: Children's Learning & Education Sub-genre: Society & Culture Label: Scholastic Teaching Resources Language: English Publisher: Scholastic Teaching Resources 10 3,913.00 39,130.00 363 Set Basic Vocabulary Board. Each Unit Comes With: Flashcards Smash Mat Trace And Color Cut And Glue Flipbook Black And White Versions Of All Activities 10 10,150.00 101,500.00 364 Piece Building Block Set With 96 Pegs In Board For Color Recognition Sorting & Counting. Assembled Product Dimensions (l X W X H) 0.72 X 0.49 X 0.39 Feet. Width-0.49 Ft 5 2,000.00 10,000.00 365 Set Busy Board Sensory Toys For Learning Fine Motor Skills (specs:1ftx1ft : Book-type With Different Fine Motor Activities: Felt Paper, Plastic And Cloth Materials) 3 800.00 2,400.00 366 Set Dolch Basic Sight Words. (bitay Max). Printed On White Tarpaulin 2 Ftx 3 Ft Binded With Two Wooden Sticks. With String (sabitan). Words At Least 2" Height Black, Arial Font Style. 10 1,500.00 15,000.00 367 Set Felt Large Story Board (specs: 2ft X 3ft, Thick Felt Material With Felt Piece Such As Vehicles, Planets For Story Telling) 2 1,000.00 2,000.00 368 Flash Card. Picture And Words Laminated In Thick Plastic Wrapper. New Design Phonics Flashcards Cvc Short Vowel Sounds Word List With Pictures Jumbo Size 14 350.00 4,900.00 369 Piece Kids Play Tunnel (specs Made Of Polyester Cloth Collapsible) 3 1,000.00 3,000.00 370 Set Plastic Puzzle Blocks- Mixed Sized -250 Piece -23x15x10 Cm 260 Piece. -22.2x16.8x10.3 Cm; 520 Piece., 22.2x16.8x16.3 Cm 2 700.00 1,400.00 371 Set Toy Blocks. 160piece Waffle Blocks House Building Blocks Educational Toys For 4 Years Old Kids. 2.16"x2.16" Multi-colored Plastic Blocks. Non-toxic And Odorless. 9 500.00 4,500.00 372 Set Wind Up Toys. Category: Clockwork Engineering Road Roller Material: Plastic, Size: 9.9*6.5*5.3(cm) Color: Three-color Random Hair, Ages: 3+ 10 440.00 4,400.00 373 Set Wooden Building Blocks (specs: 2x3x1 Inches, Assorted Shapes, And Colors: 10-15 Piece) 2 1,000.00 2,000.00 374 Set The Wooden Castle Made Of Colorful Blocks On Carpet In The Playroom. Size Max 6720x4480px • 56.9cm X 37.9cm 5 3,000.00 15,000.00 375 Set Wordless Picture Books. A Wordless Book About Dealing With Big Emotions Like Fear, Grief, Loss, Sadness, And Anger Hardcover | 36 Pages Product Dimension: Approx. W1cm X L22.2cm X H22.2cm Product Weight: Approx. .28kg 20 1,998.00 39,960.00 376 Piece 7kg Hand Carry Luggage Travel Bag. 360 Universal Wheels. Divided Internal Space. 57 Liters Capacity. 40 X 57 X25 Cm Dimension. 3 3,500.00 10,500.00 377 Pack Clothes Pin (laundry Clothes Pins Spring Clips 24 Piece Plastic ) 5 150.00 750.00 378 Piece Comb (1 Dozen Suklay 3-hole X Sz-28 Big) 20 90.00 1,800.00 379 Piece Dipper (plastic Dipper L 11" X W 36"x H 41" 8 150.00 1,200.00 380 Piece Disposal Bins (trash Bins 75 L) 3 2,000.00 6,000.00 381 Piece Dressing Mirror (whole Body Mirror With 4 Wheels Height 5ft. Width 14 Inches) 1 1,500.00 1,500.00 382 Piece Drying Rack (78cmx46cmx185cm) 2 2,500.00 5,000.00 383 Piece Dust Catcher With Broom (2n1 Broom Dustpan Set Windproof Floor Sweeper With Broom) 10 170.00 1,700.00 384 Piece Feather Duster (soft Magic Feather Duster Long Size And Colorful Colors (plastic) 10 150.00 1,500.00 385 Piece First Aid Cabinet, Plastic Box 30cmx12cmx30co With Transparent Cover (free Installation) 2 1,500.00 3,000.00 386 Piece Flat Iron (non-stick Teflon Sole Plate Spray Function Ht &width 251x170x120mm) 3 1,500.00 4,500.00 387 Piece Floor Mop (magic Spin Mop With Bucket 360° Rotating Floor Cleaning Plastic Liner) 10 1,000.00 10,000.00 388 Piece Hair Razor (twin Blade Disposable Razors) 100 30.00 3,000.00 389 Dozen Hangers (12 Piece. Plastic Hanger) 2 300.00 600.00 390 Set Housekeeping Cart. Multi-functional Movable Cleaning Cart Housekeeping Property Cleaning Tool Cart Special Trolley. Standard For Housekeeping Work. 2 5,000.00 10,000.00 391 Piece Ironing Board (ironing Board With Stand Portable 43"iron Board (70cm To 86 Cm) 3 1,300.00 3,900.00 392 Set Laundry Bag Set (4 Piece/set Laundry Washing Bag- 1 Pc M(30cmx40cm) 1pc L (40cmx50cm) 1pc Xl (50x60 Cm) 5 150.00 750.00 393 Piece Nail Clipper (stainless Nail Clippers H-8 Cm Wt-0.046 Kg) 20 100.00 2,000.00 394 Set Nail File (12-piece Red Nail File (medium) 20 50.00 1,000.00 395 Piece Non-slip Doormat 75x45 Cm Rubber 18 500.00 9,000.00 396 Piece Pail (utility Pail With Metal Handle 10l/26x27 Cm) 7 300.00 2,100.00 397 Set Shopping Cart Utility Cart Trolley Grocery Cart For Warehouse Garden Supermarket 2 6,000.00 12,000.00 398 Piece Sponge (high Density Double-sided Dishwashing 7x10x3 Cm) 20 30.00 600.00 399 Piece Spray Bottle (garden Sprayer Capacity: 500ml) 10 170.00 1,700.00 400 Piece Trash Can (with Plastic Swing Lid L-27 Cm, W- 17.5cm, H- 40.5 Cm) 8 260.00 2,080.00 401 Piece Wash Basin (laundry Basin 23-inch, Aluminum Made) 3 300.00 900.00 402 Piece Adaptive Swim Life Jacket For Disabled Keeps The User’s Face Out Of The Water Stops The Tension Of The Neck, Upright Position Back Support, Therapist Hands Free, No Latex Double Harness Distributes Tension’s Adjustment. Possibility To Add The Harness Pad (or “cuissard” In French) 2 11,000.00 22,000.00 403 Piece Bed Foam (for Single Bed, 3 Inches Thick) 1 3,500.00 3,500.00 404 Piece Bed Sheets- Material: Cotton+polyester, Packaging Content: 2-piece Pillowcase, 1 Pc Fitted Sheet, Single Size:36"*75"+7.8", Pillowcase Sice: 18'*28", Gartered Corners 10 2,000.00 20,000.00 405 Piece Bedsheets (cotton Full Gartered 3n1 Bed Sheets, L-60in Ww-75in (for Single Bed Size) 10 300.00 3,000.00 406 Piece Blanket (cotton Full Gartered 3n1 Bed Sheets, L-60in Ww-75in (for Single Bed Size) 10 300.00 3,000.00 407 Piece Blankets- Length: 160 Cm White Sheet Soft Texture, High Quality Fabric Size: 52 X 90 Inch 20 450.00 9,000.00 408 Piece Cervical Pillow. Memory Foam Pillows Contour Memory Foam Pillow For Neck Pain Relief, Orthopedic Neck Bed Pillow For Side Sleepers Back And Stomach With Pillowcase, Removable, Washable 2 2,000.00 4,000.00 409 Set Dish Towels (10 Pc. Per Set 25 Cm X 25 Cm Microfiber Super Absorbent) 20 1,000.00 20,000.00 410 Piece Dri-fit T-shirt, Color White For Sublimation Printing, Size: Extra Large 150 150.00 22,500.00 411 Piece Dri-fit T-shirt, Color White For Sublimation Printing, Size: Extra Small 150 150.00 22,500.00 412 Piece Dri-fit T-shirt, Color White For Sublimation Printing, Size: Large 200 150.00 30,000.00 413 Piece Dri-fit T-shirt, Color White For Sublimation Printing, Size: Medium 200 150.00 30,000.00 414 Piece Dri-fit T-shirt, Color White For Sublimation, Size: Small 150 150.00 22,500.00 415 Piece Face Towel (basic Face Towel - Free Size) 20 100.00 2,000.00 416 Piece Foam Rolls- Material: Expanded Polypropylene Foam Item Weight: 0.42 Pounds, Size: 18 Inches X 8ft. 5 4,000.00 20,000.00 417 Piece Foam. Size:36"x75"; Materials: Polycotton; Thickness: 6" 10 7,000.00 70,000.00 418 Piece Life Jackets For Kids’ Premium Neoprene Safety Life Jacket 5 600.00 3,000.00 419 Pair Pediatric Examination Gowns- Assorted For Kids And Adult Pediatric Examination Gowns Opening: Full Open Back. Style: Child Size Color: Jellybean Print. Made With High Quality, 100% Cotton Comfortable, Durable, Washable, And Reusable Hook And Loop Closures At Neck And Mid-back. 10 700.00 7,000.00 420 Piece Pillowcase- Length: 50 Cm (20 ") Pillowcase Quantity: 1 Piece Width: 80 Cm (31 ") 100 % Polyester 20 180.00 3,600.00 421 Piece Pillows- Pillows, Plain White, Soft Pillow, Size:18x28 Inches 10 900.00 9,000.00 422 Piece Socks (cotton Socks Unisex High Street Socks Sixe:38-44) 5 100.00 500.00 423 Piece Towels- Material: High Quality 100% Cotton Terry. 500gm2. Size: 90 X 180cm. 20 300.00 6,000.00 424 Piece Wash Rags (round Rags) 20 30.00 600.00 425 Piece Welding Gloves 3 500.00 1,500.00 426 Piece Welding Hood Cape (standard Size) 3 500.00 1,500.00 427 Piece Welding Protective Suite (genuine Whole Leader Welding Apron) 3 2,362.00 7,086.00 428 Set Doll Mannequin Kid: Female Material: Plastic Age Group: Children- 3 To 6 Years Old Mannequin Type : Full Body Base : Glass Base Style : Stand Size:height:107cm.shoulder-29cm.chest:57cm, Waist 53cm Packing: Wrapped 1pc/carton Color: Skin Tone Color 2 4,000.00 8,000.00 429 Set Doll Mannequin Kid: Male Material: Plastic Age Group: Children- 3 To 6 Years Old Mannequin Type : Full Body Base : Glass Base Style : Stand Size:height:107cm.shoulder-29cm.chest:57cm, Waist 53cm Packing: Wrapped 1pc/carton Color: Skin Tone Color 2 4,000.00 8,000.00 430 Set Doll Mannequin. Plastic Whole Body With Stand Decor Body Dress Full Body Display Female Height:185cm 2 5,000.00 10,000.00 431 Set Doll Mannequin. Plastic Whole Body With Stand Decor Body Dress Full Body Display Male Height:185cm 2 5,000.00 10,000.00 432 Piece Povidine-iodine 120ml (antiseptic Wound Solution) 5 250.00 1,250.00 433 Piece Deodorant (roll On 50 Ml Bottle) 5 200.00 1,000.00 434 Pack Detergent Powder 3kgs 5 500.00 2,500.00 435 Pack Feminine Napkin (silk Floss 12 Piece) 10 50.00 500.00 436 Piece Gauze Bandage (sterile Gauze Bandage 3x10 Per Box) 2 300.00 600.00 437 Gal. Liquid Soap, Paraben-free, Sulfate-free, Anti-aging, Anti-bacterial, Moisturizing, 1 Gallon 5 500.00 2,500.00 438 Piece Chlorine Tablet For Swimming Pool, Pack Of 300-piece 3-inch Tablet Adjustable Chlorine Dispenser 8 Inch In Combination With Mont Package Included:1*chlorine Dispenser +300 Piece Cleaning Tablet 20 500.00 10,000.00 439 Piece Table Napkin (2 Ply 40s Sheets Folded) 10 50.00 500.00 440 Roll Artificial Grass. 2mx25m Simulation Lawn Carpet Grass Garden Outdoor Rug Synthetic Thick Lawn 30mm Thick 4 20,000.00 80,000.00 441 Piece Fire Extinguisher 3lbs Abc Dry Chemical Refillable (free Installation) 4 3,000.00 12,000.00 442 Piece Artist Stool With Wheels (stainless Steel Stool Bar) 2 1,991.00 3,982.00 443 Piece Artist Taboret (35 ½" H X 17 ½" W X 14 ½" D+9/cm X 44cm X 37 Cm) 1 24,728.00 24,728.00 444 Piece Convertible Drawing And Drafting Table (manual Lift Dimension W-7.75 X D 24x H22" To 31.5") 3 8,400.00 25,200.00 445 Piece Drawing Lamp (metal Adjustable Arm Work Desk Lamp) 5 500.00 2,500.00 446 Piece Medicine Cabinet Large. Dimension: 29 X16.5x16 Cm 2 1,500.00 3,000.00 447 Piece Monoblock Chairs Color Green 200kg Capacity Size (39.5 Cmx86.5 Cmx39.5 Cm) 50 700.00 35,000.00 448 Piece Monoblock Chairs For Kids (specs: Color White, Dimension: Seat Height:212mm, Seat Width:256mm, Seat Depth:200mm) 15 300.00 4,500.00 449 Piece Multi-layer Wooden Bookshelf For Toddler (specs: 1m H X 1.5m W; Premium Cotton Canvass Material And Made Of Wood) 1 2,000.00 2,000.00 450 Piece Rectangular Table For Kids (specs: 77x55 Cm,color Red) 8 1,500.00 12,000.00 451 Piece Stack Rack (toy Origami Rack Shelves) 5 1,477.00 7,385.00 452 Piece Storage Box With Handle, Material: Plastic, Capacity: 20 L , Color: Transparent Clear( Lxwxh) 44x 31x22 29 300.00 8,700.00 453 Unit Treatment Table- Top Shelf With Guard Rail And Formica Material. Down Shelf, Material Plain Sheet. Mounted On 4 Swivel Caster Rubber Wheels 2″ With 2 Pieces Lock. Size: Lxwxh (28″x20″x34.5″), Painted White 1 17,400.00 17,400.00 454 Ream Art Paper (assorted Colors, 8.5"x11") 5 270.00 1,350.00 455 Piece Binder Clip 2" 200 20.00 4,000.00 456 Ream Bond Paper 13x8.5" Subs. 20 50 320.00 16,000.00 457 Ream Bond Paper A4 Subs. 20 50 300.00 15,000.00 458 Piece Clear Book, Long 8.5"x13", Color Violet 100 150.00 15,000.00 459 Piece Clip Board Long (specs: 23x35cm, Plastic Or Wooden) 30 200.00 6,000.00 460 Set Colored Pencils (colored Pencils 12/set) 5 190.00 950.00 461 Set Colored Pens (fine Line Colored Marker 24 Colors In Pvc Bag) 5 90.00 450.00 462 Piece Cork Bulletin Board (20x30cm Cork Board With Black Wooden Frame) 3 800.00 2,400.00 463 Set Crochet Hooks (100-piece Crochet Hook) 10 300.00 3,000.00 464 Roll Crochet Thread Hand Knitting, Crochet Single Color (blue) 5ply 50g 10 80.00 800.00 465 Roll Crochet Thread Hand Knitting, Crochet Single Color (green) 5ply 50g 10 80.00 800.00 466 Roll Crochet Thread Hand Knitting, Crochet Single Color (orange) 5ply 50g 10 80.00 800.00 467 Roll Crochet Thread Hand Knitting, Crochet Single Color (white) 5ply 50g 10 80.00 800.00 468 Roll Crochet Thread Hand Knitting, Crochet Single Color (yellow) 5ply 50g 10 80.00 800.00 469 Roll Crochet Thread Hand Knitting, Crochet Single Color (black) 5ply 50g 10 80.00 800.00 470 Roll Crochet Thread Hand Knitting, Crochet Single Color (red) 5ply 50g 10 80.00 800.00 471 Piece Cutter - Snap Off Blade Knife Blade, Refill 9 Mm 20 13.00 260.00 472 Set Double Deadbolt Door Lock Chassis: Stainless Steel Latch Or Bolt: Stainless Steel Cylinder Housing: Steel Backset: 60mm Or 70mm Door Thickness: 35-50 Mm For Essential Double Lock - Use Keys To Open/lock With 3 Keys 25 1,500.00 37,500.00 473 Piece Easel For Painting (wooden Easel Stand For Painting 1.75m Complimentary Screws Firm And Strong) 5 454.00 2,270.00 474 Set Envelop Long Brown (100 Piece) 8.5"x13" 310 300.00 93,000.00 475 Piece Expanded Envelope, Long Color Brown 100 60.00 6,000.00 476 Piece File Folders. (black Or White) Model: Minimum Of 100 Pages Capacity Size: 310*235mm, Suitable For School And Office Supply 20 500.00 10,000.00 477 Piece Glue Gun. 3.6v Cordless Hot Melt Glue Gun Rechargeable Fast Glue Gun Kit With 20-piece Glue Stick Automatic-power-off 15 1,600.00 24,000.00 478 Box Jumbo Crayons (pack Of 8) 160 200.00 32,000.00 479 Piece Knitting Needles (2 Piece/set (35cm) Knitting Sweater Stick Needle Bamboo Sweater Needle Knitting Scarf Tool) 5 200.00 1,000.00 480 Pack Laminating Pouches Long 13", 250 Micron, 100 Pouches Size: 222mmx337mm 7 2,000.00 14,000.00 481 Unit Learners'/clients' Chart Materials- A4 Size 8-1/4 X 11-3/4 Inches Or 210 X 297 Mm Or 29.7 X 21 Cm Laminated Full Color High Quality Print Photopaper 20 80.00 1,600.00 482 Piece Magnetic Aluminum Whiteboard (specs:35x50cm) 5 300.00 1,500.00 483 Piece Meter Stick, 100cm Stainless Steel Ruler 5 500.00 2,500.00 484 Gal. Multi-purpose White Glue 1 Gal. 5 1,000.00 5,000.00 485 Box Paper Clips (vinyl Coated Assorted Size By 100piece) 40 250.00 10,000.00 486 Piece Paper Tray (specs: 5layer, Long Bond Paper Rack,39x28x7cm) 3 500.00 1,500.00 487 Piece Pencil No. 2 400 10.00 4,000.00 488 Piece Pencil Sharpener Heavy Duty (item Dimension: Stainless Steel Body, 11.5x6.5x6.5) 11 500.00 5,500.00 489 Piece Permanent Marker (specs: Black, Broad And Fine) 220 50.00 11,000.00 490 Pack Pvc Cards Sheets, 50 Sets (100 Pvc Films And 50 Pvc Cards) Size: 200mmx300mm 30 3,000.00 90,000.00 491 Piece Record Book. 8.5"x13" By 200 Pages 12 300.00 3,600.00 492 Piece Sand Eraser For Ink And Pencil E-330 300 15.00 4,500.00 493 Piece Scissors, 5" Blunted Scissors, Plastic Handle. 20 200.00 4,000.00 494 Set Sewing Thread (polyester 1000 M) Assorted Color 10 200.00 2,000.00 495 Piece Sign Pen (assorted Color, Number 0.5) 250 20.00 5,000.00 496 Unit Spiral Binding Machine F4 Size S40m 40 Holes Heavy Duty [long/legal], Binding Form: Spiral / Coil , Pitch: 4:1 Size: F4 / Long / Legal Maximum Punching: 15 Sheets (70gsm Paper) Per Manual Punch Maximum Binding Capacity: 450 Sheets (70 Gsm Paper) Adjustment Margins: 2.5, 4.5, 6.5mm Number Of Holes: 40 Holes , Hole Distance: 8.47mm Size Of Machine: 425x230x270mm , Net Weight: 5.5kg 1 7,000.00 7,000.00 497 Unit Stapler Heavy Duty (ds-425) 20 150.00 3,000.00 498 Piece Sublimation Coated White Mug 11oz Sublimation Printable (blank) 500 60.00 30,000.00 499 Piece Sublimation Plain Trucker Mesh Net Cap 200 60.00 12,000.00 500 Piece Tailor’s Scissors (10") Heavy Duty 5 1,500.00 7,500.00 501 Piece Tape Dispenser Size:1" 10 1,500.00 15,000.00 502 Piece Tape Measure (body Tape Measuring Ruler Tailoring) 5 50.00 250.00 503 Piece Watercolors (50 Color Solid Watercolors Tin Box (202'82'33mm) 5 441.00 2,205.00 504 Pack Whiteboard Marker, Black. 3piece Per Pack (refillable) 100 150.00 15,000.00 505 Piece Whiteboard Marker (specs: Blue, Red And Black, Fine) 170 70.00 11,900.00 506 Roll Yarn (yarn Hand Knitting And Crochet Single Color (blue) 5ply 50g 50 80.00 4,000.00 507 Roll Yarn (yarn Hand Knitting And Crochet Single Color (green) 5ply 50g 50 80.00 4,000.00 508 Roll Yarn (yarn Hand Knitting And Crochet Single Color (orange) 5ply 50g 50 80.00 4,000.00 509 Piece Yarn (yarn Hand Knitting And Crochet Single Color (red) 5ply 50g 50 80.00 4,000.00 510 Roll Yarn (yarn Hand Knitting And Crochet Single Color (white) 5ply 50g 50 80.00 4,000.00 511 Piece Yarn (yarn Hand Knitting And Crochet Single Color (yellow) 5ply 50g 50 80.00 4,000.00 512 Box Braille Paper. 11.5"x 8.5". 1000 Sheets 5 7,000.00 35,000.00 513 Box Braille Paper. White Fanfold Tractor-feed Braille Transcribing Paper: 11.5 X 11.5 Inches, 3-hole, And 19-hole Punch. Dimensions:10.1 × 11.5 × 5.4 Inches. 1000 Sheets 5 10,000.00 50,000.00 514 Box Swell-touch Paper 11 X 11.5-in- 100 Sheets 2 10,000.00 20,000.00 515 Piece Basketball, Standard Size 2 2,000.00 4,000.00 516 Set Bocce Balls, 100mm Diameter, 4 Balls Colored Red, 4 Balls Colored Green, With Palena Ball Color White. Set With Bag. 2 20,000.00 40,000.00 517 Piece Goalball, Standard Size, And Weight, Blue 2 20,000.00 40,000.00 Assistive Devices And Equipment Shall Be Provided With At Least 1 Year Warranty And After-sales Service. Delivery Terms: Within 30 Days Drop Off Points: General Santos City Sped Integrated School – Quezon Avenue, Brgy. West, Gsc (ilrc) Payment Terms: Payment To The Service Provider Shall Be Made Through Philippine Veterans Bank Lddap-ada / Mds. In The Case Of Accounts Maintained In Other Bank, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. ***nothing Follows*** Subtotal 7,049,507.00 Grand Total 7,338,507.00 2. Deped Sdo Of General Santos City, Through Its Bids And Awards Committee (bac), Now Invites Bids For The Above Procurement Project. 3. Bidding Will Be Conducted Through Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 12009, Otherwise Known As The “new Government Procurement Act” With The Following Eligibility Requirements: A. Valid And Updated Philgeps Certification (platinum) From The Sole Proprietorships, Partnerships, Corporations, Cooperatives And Persons/entities In The Form Of Joint Venture; B. Statement Of The Bidder Of All Its Ongoing Government And Private Contracts; C. Statement Of The Bidder’s Slcc Similar To The Procurement Project Which Is 50% Of The Abc Or A Combination Of Contacts: (i) At Least One (1) Similar Contract Amounting To At Least 25% Of The Abc And (ii) Other Contracts, Whether Similar Or Not, With An Aggregate Amount Of At Least 25% Of The Abc, Provided Their Total Value Is At Least 50% Of The Abc. D. The Bidder’s Computation Of Nfcc Which Is Equal To The Abc Or A Committed Line Of Credit From A Bank With At Least 10% Of The Abc; E. Jva Or The Duly Notarized Statement In Accordance With Section 52.1(b) Of The Irr, If Applicable; F. Bid Security In The Prescribed Form, Amount And Validity Period; G. Technical Specifications H. Omnibus Sworn Statement I. Original And Signed Copy Of The Bid Form 4. The Contract Will Be Awarded To The Supplier Determined To Have The Single Or Lowest Calculated And Responsive Bid (s/lcrb) Based On The Above Final Technical And Financial Requirements. 5. A Complete Set Of Bidding Documents In Soft Copy Only May Be Purchased At Deped-division Of General Santos City Bac Secretariat, Located At Tiongson St., Lagao, General Santos City Upon Submission Of A Letter Of Intent, And Payment In Cash On A Non-refundable Fee By Interested Bidders To The Deped Division Cashier. Only Bidders Who Purchased The Bidding Documents Provided Below Shall Be Allowed To Submit Bid/bids Not Later Than The Scheduled Receipt And Opening Of Bids Bidding Document Price Lot Number Price Lot No. 1 P 500.00 Lot No. 2 P 10,000.00 6. It May Be Viewed Or Downloaded After Payment From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.gov.ph. The Schedule And Venue Of The Procuring Activities Are As Follows: Activity Date And Time Venue Pre-bid Conference April 21, 2025 2:00 P.m. (monday) Sds Conference And Online Via Google Meet Issuance Of Bidding Documents Until May 5, 2025 1:00 P.m. (monday) To Be Sent To Bidder’s Email Address After Payment Of The Bidding Documents Receipt And Opening Of Bids May 5, 2025 2:00 P.m. (monday) Division Office/google Meet The Pre-bid Conference Is Open To All Interested Parties Who May Have Or Have Not Bought The Bidding Documents. 7. Bids Must Be Physically Delivered To The Address And On The Date And Time Stated Herein. Submission Of Digital Copy Of The Bidding Documents Shall Not Be Accepted. All Bids In Modes Of Procurement That Are Competitive In Nature Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Section 56.2 Of The Irr. 8. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend The Opening Of Bids At The Address, Date And Stated Herein. Late Bids Shall Not Be Accepted. 9. For Further Information, Please Refer To: Ofelia S. Panes Michael Jhon A. Del Sol Administrative Officer Iv (records) Administrative Assistant Ii Bac Secretariat Head Bac Secretariat Member Email: Ofelia.panes@deped.gov.ph Email: Bac.depedgensan@deped.gov.ph Cell No. 09692673871 Cell No. 09278865516 Approved By: Mervie Y. Seblos, Cese Oic – Assistant Schools Division Superintendent Bac Chairperson Bacsec/mds

Details: Description Invitation To Bid For The Procurement Of Technical-vocational- Livelihood (tvl) Equipment Packages To Public Senior High Schools Of The Division Of Surigao Del Sur With Approved Budget For Contract Worth Sixteen Million, Five Hundred Eighty Thousand And Twenty Seven Pesos (16,580,027.00) Stock No. Unit Item Description Quantity Unit Total Cost Cost Lot A: Cookery 1 Apple Corer Type: Apple Corer Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe 44 834 36,696.00 2 Pc Bain Marie,table Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Soiuce: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 11 15099 166,089.00 3 Pc Blender, Electric Type: Blender Machine Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 11 5,000 55,000.00 4 Pc Board, Chopping/cutting, Plastic Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 176 310 54,560.00 5 Pc Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 11 11000 121,000.00 6 Pc Braising Pan, Medium Type: Braising Pan Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 88 438 38,544.00 7 Pc Can Opener Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 11 465 5,115.00 8 Pc Casserole, Medium Type: Casserole Pot Body Shape:round Material:stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 44 6399 281,556.00 9 Pc Casserole, Small Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 132 3709 489,588.00 10 Pc Colander, Medium Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm Body Thickness: 0.8 Mm (minimum) 22 579 12,738.00 11 Pc Colander, Small Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 44 438 19,272.00 12 Pc Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 88 490 43,120.00 13 Pc Dispenser, Paper Towel Type Paper Towel Dispenser Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 44 250 11,000.00 14 Pc Fan, Electricfan Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, 11 5200 57,200.00 15 Pc Fire Extinguisher (with Contents) 1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11 8000 88,000.00 16 Pc Fish Poacher, Medium Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Includes Stainless Steel Lid With Handle And Removable Insert 11 3745 41,195.00 17 Pc Fork, Carving Type: Carving Fork Body Shape: Square Shape Prong Prong Material:high Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastictriple-riveted Handle Preferably With Packing Case 33 812 26,796.00 18 Pc Fork, Kitchen Type: Kitchen Fork Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 88 435 38,280.00 19 Pc Frying Pan, Large Type: Frying Pan (large) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 5499 120,978.00 20 Pc Frying Pan, Medium Type: Frying Pan (medium) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferablywith A Packing Case 88 3299 290,312.00 21 Pc Frying Pan, Small Type: Frying Pan (small) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 132 2,499.00 329,868.00 22 Pc Funnel, S/s,, Medium Type:stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 44 356.00 15,664.00 23 Pc Funnel, S/s, Small Type: Stanless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe 44 246.00 10,824.00 24 Pc Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 44 432.00 19,008.00 25 Pc Glass Rack Type: Glass Rack Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 132 3,093.00 408,276.00 26 Pc Ice Cream Scooper Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm With Trigger Spring Handle And Scoop Scraper Mechanism 22 374.00 8,228.00 27 Pc Knife, Boning Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 88 459.00 40,392.00 28 Pc Knife, Chef Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 110 808.00 88,880.00 29 Pc Knife, Cleaver Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 22 1,274.00 28,028.00 30 Pc Knife, Oyster Type: Oyster Knife Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 44 514.00 22,616.00 31 Pc Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 11 1,141.00 12,551.00 32 Pc Meat Slicer Type: Meat Slicer Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 11 18,000.00 198,000.00 33 Pc Pastry Tool Must Be Branded. Tube, Pastry Cookery Nc Ii Type: Pastry Tubes Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 88 301.00 26,488.00 34 Pc Peeler, Y-type Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger Preferably With A Packing Case 88 245.00 21,560.00 35 Pc Pepper And Salt Mill Food Grade And Non-toxic Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 88 605.00 53,240.00 36 Pc Piping Bag Type : Piping Bag Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 88 312.00 27,456.00 37 Pc Plate Rack Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 132 1,760.00 232,320.00 38 Pc Preparation Table With Sink Heavy Duty Wire Shelving, 2.6 Mm Diameter (minimum) Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 55 30,000.00 1,650,000.00 39 Pc Pressure Cooker Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 11 17,309.00 190,399.00 40 Pc Roasting Pan Type: Roasting Pan Body Shape:rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 44 339.00 14,916.00 41 Pc Scissor, Kitchen Dishwasher Safe Scissor, Kitchen Cookery Nc Ii Type:kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 88 219.00 19,272.00 42 Pc Siever, Small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 88 328.00 28,864.00 43 Pc Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 88 129.00 11,352.00 44 Pc Skimmer, Spider Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 88 105.00 9,240.00 45 Pc Soup Cup Rack Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 132 360.00 47,520.00 46 Pc Soup Ladle, 12oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 22 347.00 7,634.00 47 Pc Soup Ladle, 3 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 88 198.00 17,424.00 48 Pc Soup Ladle, 6 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 88 209.00 18,392.00 49 Pc Soup Ladle, 8 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 33 135.00 4,455.00 50 Pc Spatula Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 88 249.00 21,912.00 51 Pc Spoon, Kitchen Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 88 109.00 9,592.00 52 Pc Spoon, Kitchen (slotted) Type: Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe 88 236.00 20,768.00 53 Pc Spoon, Measuring Must Be Branded. Spoon, Measuringcookery Nc Ii Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 88 198.00 17,424.00 54 Pc Spoon, Parisienne Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 88 281.00 24,728.00 55 Pc Spoon, Serving Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 264 223.00 58,872.00 56 Pc Spoon, Wooden Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 88 150.00 13,200.00 57 Pc Stock Pot, Large Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum) 22 7,800.00 171,600.00 58 Pc Strainer Chinois, Small Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 33 667.00 22,011.00 59 Pc Strainer Chinois, Small Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Ha 22 1073 23,606.00 60 Pc Strainer Medium, Fine Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 88 410.00 36,080.00 61 Pc Strainer Small, Fine Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 88 253.00 22,264.00 62 Pc Tenderizer, Medium Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe Must Be Branded 88 550.00 48,400.00 63 Pc Thermometer, Pocket/pin Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe Must Be Branded 33 236.00 7,788.00 64 Pc Tong, 12 Inches Type: Tong , 12 Inches Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 88 319.00 28,072.00 65 Pc Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe 110 289.00 31,790.00 66 Pc Tray, Baking, Small Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe Must Be Branded. 88 897.00 78,936.00 67 Pc Tray, Utility Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished Preferably With A Packing Case Washable And Oven Safe 132 536.00 70,752.00 68 Pc Turner 3"x6" Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 88 299.00 26,312.00 69 Pc Utility Cart Type: Utility Cart Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 11 5,564.00 61,204.00 70 Pc Weighing Scale, 1kg, Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 44 1,584.00 69,696.00 71 Pc Wighing Scale, 5kg Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 22 2,329.00 51,238.00 72 Pc Wire Skimmer, Small Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 88 399.00 35,112.00 73 Pc Wire Whisk, Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 22 440.00 9,680.00 74 Pc Wire Whisk, Medium Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 88 454.75 40,018.00 75 Pc Wire Whisk, Small Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 88 378.00 33,264.00 76 Pc Wok, Medium Type: Wok, Medium Body Shape:round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 11 4,099.00 45,089.00 77 Pc Wok, Small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 44 3,194.00 140,536.00 78 Pc Working Table Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness:gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded. 22 41,720.00 917,840.00 79 Pc Zester Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. 88 399.00 35,112.00 Total 7,732,802.00 Lot B: Bread And Pastry Production 1 Pc Air Compressor With Airbrush Cake Decorating Set Ultra-compact Airbrush Compressor Designed For Quiet Operation Oil-less, Maintenance-free Design (safe For Food Applications) Delivers Up To 25 Psi (0.4 Cfm) Of Consistent Airflow Uses Standard 1/8″ Bsp Male Outlet To Connect To The Air Hose Operates On 12v Dc Power (ac Adapter Provided) Designed For Intermittent Use (30 Minutes Of Operation Followed By A 15-minute Cooldown) Includes A Nylon Air Hose With Standard 1/8″ Bsp Fittings 8 24600 196,800.00 2 Pc Beater Type: Beater Main Material: Plastic + Stainless Steel Color: White Wide Operating Voltage Range: 0-250v Rated Voltage: 220v Rated Frequency: 50hz Speed Selection: 0-7 Gear Rated Power: 100w Hand Mixer Size: 180 * 70 * 130mm/7.09 * 2.76 * 5.12in 48 960 46,080.00 3 Pc Board, Chopping, 6 Color Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 48 659 31,632.00 4 Pc Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 8 8700 69,600.00 5 Pc Bowl, Mixing (6 Pcs/set) Material: Stainless Steel / Food-grade Plastic Sizes: Assorted (small To Large) 96 911 87,456.00 6 Pc Cake Pans, Round #4,#6, #8, #10, #12, #14, #16 Material: Aluminum Or Non-stick Carbon Steel Sizes: #4: 4-inch Diameter #6: 6-inch Diameter #8: 8-inch Diameter #10: 10-inch Diameter #12: 12-inch Diameter #14: 14-inch Diameter #16: 16-inch Diameter 48 937 44,976.00 7 Pc Cake Stand, With Tier Type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set Smooth And No Sharp Edges 48 5589 268,272.00 8 Pc Cake Turn Table Type: Turn Table Body Shape : Circular Material: Cast Aluminum Plate.and Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise 24 3500 84,000.00 9 Pc Coupler Type: Foood Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe 104 250 26,000.00 10 Pc Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 96 300 28,800.00 11 Pc Cup, Measuring, 250 Ml For Liquid Type: Glass V-shaped Nozzle High Quality 3.3 Borosilicate0ml (2oz)high Borosilicate Glass Measuring Cup-v-shaped Spout 120ml (4oz)high Borosilicate Glass Measuring Cup-v-shaped Spout 250ml (8oz)high Borosilicate Glass Measuring Cup-v-shaped Spout 96 289 27,744.00 12 Pc Cup, Measuring, 500ml For Liquid Material: Food-grade Plastic Or Stainless Steel Capacity: 500ml (16.9 Oz) Graduation Markings: Clearly Marked In Milliliters (ml) And Ounces (oz) For Precise Measurement Handle: Ergonomic, Heat-resistant Handle For Easy Pouring 96 394 37,824.00 13 Pc Cutter, Dough Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Lenght : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 8 214 1,712.00 14 Pc Cutter, Pie Type: Cutter Product Dimensions 8.8"l X 0.8"w Blade Material Stainless Steel Handle Material Plastic Or Stainless Steel Or Silicone Or Bamboo 48 473 22,704.00 15 Pc Flour Sifter, Hand Cranked Type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm ( Minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe 24 323 7,752.00 16 Pc Grater Type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe 48 518 24,864.00 17 Pc Knife, Kitchen Material: Stainless Steel Blade With Non-slip Handle Blade Length: 8-10 Inches Purpose: General Food Preparation 48 519 24,912.00 18 Pc Knife, Pallet Material: Stainless Steel Blade With Plastic/wood Handle Blade Length: 8-12 Inches Type: Offset Or Straight Blade Purpose: Spreading, Smoothing, And Decorating Cakes 48 286 13,728.00 19 Pc Ladle , 3 0z Material: Stainless Steel With Heat-resistant Handle Capacity: 3 Oz (90 Ml) Purpose: Portioning Liquid Ingredients Such As Batters, Sauces, And Glazes 48 396 19,008.00 20 Pc Loaf Pan Big Material: Aluminum Or Non-stick Carbon Steel Sizes: Big: 9 X 5 X 3 Inches 48 598 28,704.00 21 Pc Loaf Pan, Medium Material: Aluminum Or Non-stick Carbon Steel Medium: 8 X 4 X 3 Inches 48 478.00 22,944.00 22 Pc Loaf Pan, Small Material: Aluminum Or Non-stick Carbon Steel Small: 7 X 3 X 2.5 Inches 48 325.00 15,600.00 23 Pc Muffin Pan, Big Material: Non-stick Carbon Steel Or Aluminum Sizes & Capacity: Big: 6-cup Jumbo Muffin Size (3.5-inch Diameter Per Cup) 48 649.00 31,152.00 24 Pc Muffin Pan, Medium Material: Non-stick Carbon Steel Or Aluminum Sizes & Capacity: Medium: 12-cup Standard Muffin Size (2.75-inch Diameter Per Cup) 48 814.00 39,072.00 25 Pc Muffin Pan, Small Material: Non-stick Carbon Steel Or Aluminum Sizes & Capacity: Small: 24-cup Mini Muffin Size (1.5-inch Diameter Per Cup) 48 1,429.00 68,592.00 26 Pc Pie Pan , 10 Inches Diameter Material: Aluminum Or Non-stick Carbon Steel Diameter: 10 Inches 48 995.00 47,760.00 27 Pc Pie Pan, # 6, #8, #10 Type: Pie Pan Depth: ~1 To 1.5 Inches Material Options: Aluminum, Non-stick Coated Steel, Glass, Ceramic, Depth: ~1.25 To 1.75 Inches Material Options: Aluminum, Stainless Steel, Glass, Ceramic, Depth: ~1.5 To 2 Inches Material Options: Heavy-duty Aluminum, Glass, Ceramic 48 850.00 40,800.00 28 Pc Pillars, Cake Material: Food-grade Plastic Or Acrylic Height: 3-10 Inches (various Sizes) Type: Round 48 790.00 37,920.00 29 Pc Piping Bag Type : Piping Bag Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 200 312.00 62,400.00 30 Pc Rectangular Pan, 1 X 8 Material: Aluminum Or Non-stick Carbon Steel Sizes: #6: 6-inch Diameter (small Pies) #8: 8-inch Diameter (medium Pies) #10: 10-inch Diameter (large Pies) 32 594.00 19,008.00 31 Pc Rolling Pins Classic Wooden (rod Or Handle Type) Standard: 10-18 Inches Mini: 7-10 Inches (for Smaller Pastries) Large: 18+ Inches (for Heavy-duty Baking) 48 425.00 20,400.00 32 Pc Rubber Scraper Type: Flat Scraper Small (6-8 Inches) – Ideal For Small Bowls And Precise Scraping. Medium (9-12 Inches) – General Baking And Mixing. Large (12+ Inches) – Good For Big Batches And Cooking. 48 525.00 25,200.00 33 Pc Sauce Pan Type: Sauce Pan Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 48 3,590.00 172,320.00 34 Pc Sheet Pan Oven Safe Up To 450 Degrees F; Dishwasher-safe For Easy Cleaning 17.7 X 12.4 X 1.1 Inches (lxwxh, Baking Sheet); 16.7 X 11.7 Inches (lxw, Cooling Rack) 48 721.00 34,608.00 35 Pc Spoon, Measuring Must Be Branded. Spoon, Measuringcookery Nc Ii Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 200 508.00 101,600.00 36 Pc Spoon, Wooden Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 48 190.00 9,120.00 37 Pc Strainer Type: Strainer Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 48 394.00 18,912.00 38 Pc Tip, Decorating Stainless Steel Color Silver 160 120.00 19,200.00 39 Pc Weighing Scale, 10 Kgs Black And Silver Recommended Uses For Product Kitchen Special Feature Lightweight Display Type Analog 48 2,540.00 121,920.00 40 Pc Weighing Scale,5 Kgs, Digital Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 48 1,198.00 57,504.00 41 Pc Wire Whisk, Medium Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 48 421.00 20,208.00 Total 2,078,808.00 Lot C: Computer Systems Servicing 1 Pcs Allen Wrench 1. Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm; 3. With Holder/ring To Keep The Set Intact; 4. Label Of Sizes Engraved In Each Allen Wrench; 5. Smooth Surfaces And No Sharp Edges6. Plastic Pack By Set 10 ₱962.00 ₱9,620.00 2 Pcs Anti-static Device (anti-static Wrist Strap) Consists Of: A) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor, B) Banana Plug With Alligator Clip For Connecting To Ground (or Equivalent), C) At Least 59" Long Coiled Cord; D) Non Toxic Materiale) Carton Box Or Plastic Pouch Packaging 10 ₱184.80 ₱1,848.00 3 Pcs Combination Pliers, 8" Type: Combination Pliers; Body Shape: Square Nose Material: Chrome Vanadium/forged Steel Length: 9 Inches (minimum) Insulation Range: 1000 Volts (etched On The Handle) Design: Square Nose With Serrated Jaw Comes With Nickel Plated Finish, Side Cutter And Insulated Handle Must Be Branded (brand Must Etched Either In The Head Or On The Handle) 10 ₱187.00 ₱1,870.00 4 Pcs Crimping Tool (rj 11/45) 1. Ratchet Crimp Tool 2. All-in-one Tool That Can Strip, Cut, And Crimp 3. Lightweight Steel Frame 4. Rj-11/45 Compatible 5. Positions For 8p/8c, 6p/6c And 4c Connectors 6. Lightweight, Compact, And Durable 7. Smooth Surface And No Sharp Edges Except Cutting Edges 8. Carton Box Packaging 30 ₱532.00 ₱15,960.00 5 Pcs Desoldering Pump 1. Material : Plastic Or Aluminum Housing; 2. Replaceable Heat-resistant Plastic Tip; 3. Length : Minimum Of 6 Inches; 4. Effective In Removing Solder; 5. Smooth Surface And No Sharp Edges 6. Carton Or Plastic Packaging 10 ₱75.00 ₱750.00 6 Pcs Electric Drill, Portable Type: Electric Power Material: Hard Plastic Rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts Speed: Variable Speed Chuck Capacity: 2 To 13 Mm Power Cord Must Have Flat Blade Attachment Plug (type A Plug) Comes With Hss Drill Bits: 2mm 4pcs. 4 Mm 4pcs. 6 Mm 4pcs. 8 Mm 4pcs. 10 Mm 4pcs. 12 Mm 4pcs. 12.5 Mm 4pcs. Total- (28 Pcs) Masonry Drill Bits; 4 Mm 2pcs. 6 Mm 2pcs.8 Mm 2pcs. 10 Mm 2pcs. 12 Mm 2pcs. Total- (10 Pcs.) With Hammer Function For Concrete Drilling Comes With English User's Manual Includes Of The Following: A. A Diagram Of The Parts With Label; B. Assembly Instructions; C. Operating Procedures; D. Safety Precautions When Using The Equipment; E. Basic Troubleshooting And Maintenance Procedures. Warranty Period Of Parts And Service: 1 Year 1 ₱1,644.00 ₱1,644.00 7 Pcs External Optical Drive 1. Interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd; 5. Package Includes: A) 1 X External Optical Drive, B) 1 X Usb Power Cable, C) 1 X Usb Data Cable, 6. Item Size: 5.4"x 5.51"x0.63"(l X W X H) Approximate 7. Metal Or Hard Plastic Casing 8. Smooth Surface And No Sharp Edges 9. Carton Box Packaging 10. With User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures 11. With Service Centers Located In Major Cities In The Philippines. 2 ₱1,700.00 ₱3,400.00 8 Pcs Flash Drive 1. Capacity: 32 Gb ; 2. Connectivity: Usb 3.0, Backward-compatible With Usb 2.0, Plug And Play ; 3. Device/os Compatibility: Windows Vista, Windows 7, 8, 10, Mac Os 10.6+ Or Later Versions; 4. Form: Swivel Type Or With Cover; 5. Dimension: 0.40 X 0.80 X 2.31 In. (10.16 X 20.32 X 58.67 Mm) Approximate 6. Metal Or Hard Plastic Casing 7. Smooth Surface And No Sharp Edges 8. Carton And/or Plastic Packaging 9. User's Guide On Name Of Parts, Connection Guide, Maintenence And Safety Precautions. 30 ₱509.00 ₱15,270.00 9 Pcs Flashlight, Head-mounted 1. Type: Rechargeable, Head Mounted Led Flashlight; 2. Minimum Of 160 Lumens; 3. Beam Distance: Minimum Of 150 Meters; 4. Includes 220 V Ac Charger/power Adaptor (or Equivalent); 5. Charging Time: 3-6 Hours; 6. Provides Up To 30 Hours (minimum) Of Constant Light On A Single Full Charge; 7. Approximate Size: 60x 30mm 8. Smooth Surface And No Sharp Edges 9. Carton Box Or Plastic Pouch Packaging. 10. With User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 5 ₱480.00 ₱2,400.00 10 Pcs Hub / Switch 1. Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd 2. Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix 3. External Power Supply Adapter: 100-240vac,50/60hz 4. Fanless 5. Data Rates: 10/100mbps At Half Duplex ; 20/200mbps At Full Duplex 6.led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 7.dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) 8. Transfer Method: Store And Forward 9. Advance Functions: Green Technology, Saving Power Up To 73%; 802.3x Flow Control, Back Pressure; Auto-uplink Every Port 10. Certification: Fcc, Ce, Rohs11. 30 ₱3,030.00 ₱90,900.00 11 Pcs Lan Cable Tester 1 Cable Tester With Led Indication For Rj12, Rj11, Rj45, Cat5e, Cat5, 10/100 Base-t; 2 Main Tester: 1-2-3-4-5-6-7-8-g; 3 Remote Tester: 1-4-3-2-5-6-7-8-g; 4 Power Supply: 9 V Battery (included); 5 Capable Of Testing Crossover, Straight-through, And Rollover Cables; 6 Includes Plastic Case Or Pouch; 7 With User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures C. Safety Precautions When Using The Equipment, 5 ₱300.00 ₱1,500.00 12 Pcs Long Nose Pliers, 8" 1 Material: Chrome Vanadium Steel, Hrc 38 To 60; 2 Length: 7 Inches (minimum); 3 Handle Type: Curved Handle With Rubber Cushion For Easy Grip; 4 Jaws Type: Knurled And Long Tempered; 5 Comes With Hardened Cutting Edges And Chrome-nickel Finish. 6. Smooth Surface And No Sharp Edges 7. Carton Or Plastic Packaging 10 ₱665.00 ₱6,650.00 13 Pcs Multimeter, Digital Material: Plastic Casing Main Functions: Auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Oldc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5) 11 ₱1,700.00 ₱18,700.00 14 Pcs Patch Panel (48 Ports) 1. Network Patch Panel 2. 48 Port Patch Panel 3. Cat6 Cable 4. Material: Abs Plastic 5. Application: Utp(unshielded) 6. Certification: Rohs, Iso, Ce 7. Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) 8. Transport Package: 1pcs/box 9. Smooth Surface And No Sharp Edges 20 ₱4,363.00 ₱87,260.00 15 Pcs Pc Video Camera 1) 5.0 Mega Pixel Web Camera, Usb-type; 2) With Microphone For Laptop And Desktop Pc Use; 3) Resolution: At Least 640 X 480; 4) Support Windows Xp/7/8/equivalent Mac Os Or Later Versions; 5) With User's Manual In English Which Includes: A) A Diagram Of The Parts With Their Names, B) Operating Procedures C) Basic Troubleshooting And Maintenance Procedures. 6) Hard Plastic Or Metal Casing 7) Smooth Surface And No Sharp Edges 1 ₱1,389.00 ₱1,389.00 16 Pcs Phillip’s Screwdriver, 8" Insulated 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) 5.nonslip Handle Design6. Carton Or Plastic Packaging 10 ₱1,842.00 ₱18,420.00 17 Pcs Precision Screwdriver Set 1. Material: Hardened And Tempered Steel. 2. 1 Set Comes With The Following: A) 3 X Phillips Tip No. 00, 0, And 1; B) 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; C) 1 X Awl; D) 1 X Magnet; E) Plastic Storage Case; 3. Non Slip Design Handle 5 ₱3,204.00 ₱16,020.00 18 Pcs Soldering Iron, 60w 1. Type: Iron Rod 2. Voltage: 220/240vac, 60hz, Single Phase; 3. Power: 60w (minimum); 4. Body Length: 8.3 Inches (21 Cm) Approximate 5. Cord Length: 1.5 Meters (minimum) 6. Handle: Plastic; (non-slip Handle) 7. With User's Manual Written In English That Contains User's Guide, Operating Procedure, Parts With Description, Safety Procedure, And Maintenance; 8. Interchangeable Copper Tip; 9. Should Have Available Spare Parts Nationwide For A Minimum Period Of 5 Years; 10. Carton And/or Plastic Packaging 10 ₱378.00 ₱3,780.00 19 Pcs Standard Screwdriver (flat), 8” Insulated 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000v, Vde Certified (or Its Equivalent) 5.nonslip Handle Design 6. Carton Or Plastic Packaging 10 ₱1,011.00 ₱10,110.00 20 Pcs Uninterruptible Power Supply (ups) The Item Shall Have The Following Specifications: 1. Type: Battery (included): Lithium Ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof 2. Voltage: Nominal Input Voltage: 230v, 50/60 Hz 3. Output Power Capacity: 600va (minimum) 4. Output Connections:2 Universal Receptacle (minimum) 5. Cord Length: 1 Meter (minimum) 20 ₱2,200.00 ₱44,000.00 21 Pcs Usb External Hd 1) 1tb Portable/external Hard Drive 2) Application: Laptop / Desktop Pc 3) Interface Type: Sataii 4) Installation: Mobile 5) Formatted Capacity: 1000gb (windows Display About 298gb) 6) Size(mm): 14.29 X 80.01 X 17.60 (approx.) 7) Metal Casing 2 ₱3,200.00 ₱6,400.00 22 Pcs Wire Stripper Type: Spring-loaded Self Opening; Body Shape: Long Jaw With Slot Blade Material: Hardened Alloy Steel (sharp Edges To Strip And Cut The Wires) Wires To Be Stripped: 10 Awg To 24 Awg Length: 7 Inches (minimum) Comes With Automatic Self- Adjusting Spring, Crimping Slot, And Hard Plastic Hand 6 ₱1,335.00 ₱8,010.00 23 Pcs Wireless Access Point Type: Wireless Access Point Dual Band Wifi Band / Datatransfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4 Ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) 32 ₱1,100.00 ₱35,200.00 Total ₱401,101.00 Lot D: Food And Bevarage Services 1 Pc Chair, Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 288 3099 892,512.00 2 Pc Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 16 2500 40,000.00 3 Pc Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color : White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 40 537 21,480.00 4 Pc Cups And Saucers 5-6 Oz 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 192 315 60,480.00 5 Pc Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 192 279 53,568.00 6 Pc Fork, Dessert Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished,with Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mmwidth : 20 - 30 Mmhandle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 192 271 52,032.00 7 Pc Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 192 235 45,120.00 8 Pc Fork, Fish Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mmhandle Thickness : 2 Mm - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 192 223 42,816.00 9 Pc Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 192 223 42,816.00 10 Pc Glass, Champagne Flute Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 192 264 50,688.00 11 Pc Glass, Collins Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 192 299 57,408.00 12 Pc Glass, Juice / Hi- Ball 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Diswasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 192 309 59,328.00 13 Pc Glass, Pilsner (ice Tea Glass) Type: Flaired Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass : 1 -3 Mm With Flaired Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 192 309 59,328.00 14 Pc Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 192 391 75,072.00 15 Pc Glass, White Wine Packed In Carton Box Glass, White Wine Food And Beverage Services Nc Ii Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 192 321 61,632.00 16 Pc Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 192 815 156,480.00 17 Pc Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality C34 16 312 4,992.00 18 Pc Knife, Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 192 260 49,920.00 19 Pc Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mmhandle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 192 234 44,928.00 20 Pc Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 192 279 53,568.00 21 Pc Menu Folder Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 16 259.00 4,144.00 22 Pc Napkin Holder Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 48 499.00 23,952.00 23 Pc Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 16 299.00 4,784.00 24 Pc Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 16 405.00 6,480.00 25 Pc Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 64 332.00 21,248.00 26 Pc Plate, Dessert, 7”to 8” Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 192 315.00 60,480.00 27 Pc Plate, Dinner, 10” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 192 373.75 71,760.00 28 Pc Plate, Fish, 8” To 9” Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 192 310.00 59,520.00 29 Pc Round Table (8's) Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 16 20,000.00 320,000.00 30 Pc Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 192 345.00 66,240.00 31 Pc Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 192 329.00 63,168.00 32 Pc Salad Plates 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 192 342.00 65,664.00 33 Pc Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 32 379.00 12,128.00 34 Pc Sauce Ladles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 16 409.00 6,544.00 35 Pc Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 16 421.00 6,736.00 36 Pc Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 48 499.00 23,952.00 37 Pc Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 48 542.00 26,016.00 38 Pc Show/service/ Base Plates 11” To 14” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 48 509.00 24,432.00 39 Pc Side Plates Or Bread Plates 6” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 192 306.00 58,752.00 40 Pc Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 32 270.00 8,640.00 41 Pc Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 64 422.00 27,008.00 42 Pc Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 192 499.00 95,808.00 43 Pc Soup Ladle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 16 347.00 5,552.00 44 Pc Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 32 1,835.00 58,720.00 45 Pc Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 192 358.00 68,736.00 46 Pc Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 48 354.00 16,992.00 47 Pc Spoons, Soup (cream And Consume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver Packed In Plastic Pouch 192 289.00 55,488.00 48 Pc Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 192 387.00 74,304.00 49 Pc Sugar Container The Item Must Have Good Quality Sugar Container Food And Beverage Services Nc Ii Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 40 537.00 21,480.00 50 Pc Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 24 2,800.00 67,200.00 51 Pc Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 16 2,500.00 40,000.00 52 Pc Table Napkins, Cloth, 16” X 16” Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 240 120.00 28,800.00 53 Pc Table Skirtingcloth 90”x90” Ttype: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 16 3,200.00 51,200.00 54 Pc Table, Square/rectangular (4's Or 6's) Type: Foldble Plastic Body Shape: Square/rectangle Materia: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 32 20,000.00 640,000.00 55 Pc Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 16 1,997.00 31,952.00 56 Pc Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 124 239.00 29,636.00 57 Pc Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 16 289.00 4,624.00 58 Pc Tooth Pick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 24 715.00 17,160.00 59 Pc Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 16 7500 120,000.00 60 Pc Tray, Bill Folders/ Change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 16 384.00 6,144.00 61 Pc Tray, Round (bar) Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 40 2,990.00 119,600.00 62 Pc Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 184 399.00 73,416.00 63 Pc Water Pitcher Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 40 1,433.30 57,332.00 Total 4,569,960.00 Lot E: Fron Desk Office 1 Pack First Aide Kit (bandages,antiseptic Wipes, Gauze Pads,tape,gloves And Pain Reliever) 5 ₱1,000.00 5,000.00 2 Pcs Megaphone (long Range Megaphone) Siren, Aux Input,usb/sd Port, Voice Recorder, Handy And Light Weight, 60w , 60 Meters Range 2 ₱5,045.00 10,090.00 3 Pcs Whistle Whistle Plus Echo Whistle Black 2 ₱500.00 ₱1,000.00 4 Pcs White Board Magnetic 30x45(cm) 4 ₱1,000.00 ₱4,000.00 5 Sets Camera 4k Digital Camera For Photography And Video, Autofocus Anti-shake 48mp Vlogging Camera, 3” 180 Flip Screen Camera With Flash 16x Zoom, Digital Camera With 32gb Card Battery Charger Black 1 ₱3,000.00 ₱3,000.00 6 Sets Calculator Mh-16 Bk(black) 30 ₱825.00 24,750.00 7 Sets Cart, Bell Boy Large-1340(l) X 680 (w) X 1930 (h)mm 2 ₱10,000.00 20,000.00 8 Sets Cash Register With Drawer Logicowl Oj-405c Full Metal Pos Cash Drawer Heavy Duty With Rj11 Interface 2 ₱5,500.00 11,000.00 9 Sets Credit Card Imprinter 4850 Flatbed Imprinter 1 ₱5,492.00 5,492.00 10 Sets Credit Card Voucher Holder 5 ₱3,000.00 15,000.00 11 Sets Detector, Fake Bills Philippine Counterfeit Currency Detector Cash Count Statistical Amounts With Led Display Automatic 2 ₱5,000.00 10,000.00 12 Pcs Guest Follo Rack 10 1,000.00 10,000.00 13 Unit Hypercom T7p T Pos Credit Card Terminal With Original Power Supply And Box 2 2,000.00 4,000.00 14 Unit Key Card Marker With Verifier 2 2,000.00 4,000.00 15 Sets Safety Deposit Box/drop Vault With Lcd Electronic Lock & 2 Backup Keys 2 4,000.00 8,000.00 16 Unit Speaker Lapel Original Trident Tp-638 Rechargeable Lapel Mini Speaker With Mic 65 1,500.00 97,500.00 Total ₱232,832.00 Lot F: Hairdressing 1 Pc Body Brush Prosthetic Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle" 30 65 1,950.00 2 Pc Bowl, Mixing Plastic Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non Toxic 54 75 4,050.00 3 Set Bowl, Shampoo Bowl Material: Abs Plastic With Adjustable Stand (height: 39 Inches To 54 Inches) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame Portable Type Packed With Shipping Carton Boх Branded 12 7,000 84,000.00 4 Brush Applicator Material: Plastic Non Toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 60 50 3,000.00 5 Brush Hair Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 60 100 6,000.00 6 Cap Frosting, With Hook Cap Material: Silicone Type:reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inher Liner With A Rounded Metal Hook To Pull Hair Through The Ready Made Perforations Packed With Plastic Pouch 33 210 6,930.00 7 Waterproof Cloth Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Unisex Up To 29 Inches Hair Care Treatment Styling Reversible And Reusable, Non Toxіс Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment D. Basic Troubleshooting And Maintenance Procedure 30 510 15,300.00 8 Cape Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non Toxic Packed With Plastic Pouch 30 250 7,500.00 9 Chair, Hydraulic Material:metal Base Size:length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360 Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Foot Rest 30 7550 226,500.00 10 Clamp Material: Plastic Overall Length: 9.5cm Thickness:10mm(mini Mum) Hairstyling Clamp Type 60 50 3,000.00 11 Clamp, Duck Bill Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Non Slip Handle Packed With Plastic Pouch Branded 60 60 3,600.00 12 Hair Clipper Body Material:hard Plastic Blade Materíal: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor:magnetic Typе, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box Branded 30 2580 77,400.00 13 Pc. Comb, Afro Material: Plastic Size: Over All Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 10 Inches Long (minimum) 30 85 2,550.00 14 Pc. Comb, All Purpose Material:plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non Toxic Packed With Plastic Pouch 30 35 1,050.00 15 Pc. Comb, Haircutting Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm ( Minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 30 25 750.00 16 Pc. Comb, Large Toothed Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size:at Least 0.3 Cm In Width X 4cm In Length Non Toxic Packed With Plastic Pouch 30 25 750.00 17 Pc. Comb, Tail Material:plastic Size: 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 30 25 750.00 18 Pc. Comb, Teasing Material:plastic With 2 Rows Of Teeth 1st Row:large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum Non Toxic Packed With Plastic Pouch 30 25 750.00 19 Pc. Comb, Wide Tooth Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size:at Least 0.3 Cm In Width X 4cm In Length 30 25 750.00 20 Pc. Crimpers Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110- 230volts Ac With Power Cord With Plastic Handle 30 1850 55,500.00 21 Pc. Curling Iron Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees Centigrade. Swivel Cord Up To 360 Degree 12 2,550.00 30,600.00 22 Pc. Drip Pan Material: 25-02-022 Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 15 260.00 3,900.00 23 Pc. Dryer Hair Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions 21 260.00 5,460.00 24 Pc Gloves, Disposable Material: Plastic 10 Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 12 103.00 1,236.00 25 Pc Gloves Rubber Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 30 270.00 8,100.00 26 Pc Gown Smock Material: Polyester Sizes: 1 Piece = Small Size At Least (50 Inches X 56 Inches); 1 Piece= Medium Size,at Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plstic Pouch Per Size 24 260.00 6,240.00 27 Pc Hairclips Material: Metal Size:at Least 67mm X 25-02-027 19mm Non Corrosive Packed With Plastic Pouch 18 420.00 7,560.00 28 Pc Hairnet Invisible Material:nylon Size: 55mm Type (minimum) Stretchable And Unisex Color: Black Non Toxic Packed With Plastic Pouch 15 240.00 3,600.00 29 Pc Headband Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 21 75.00 1,575.00 30 Pc Headband Flannel Flannel Cloth Size: At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 21 75.00 1,575.00 31 Pc Mirror Hand Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion (minimum) Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 15 75.00 1,125.00 32 Pc Mirror Modular Mirror Type: Plain Imirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimym) Mirror Thickness: 6mm (minimum) 15 21.20 318.00 33 Pc Prong Clip Double Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 18 45.00 810.00 34 Pc Prong Clip Single Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 18 65.00 1,170.00 35 Pc Razor Straight Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Non Corrosive Branded 30 90.00 2,700.00 36 Pc Roller Pins Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen(12 Pieces) Non Corrosive Packed With Plastic Pouch 30 60.00 1,800.00 37 Pc Rollers Large Sized Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type Packed With Plastic Pouch 30 225.00 6,750.00 38 Pc Rollers Medium Material: Plastic;diameter: 38mm (minimum) Length: 58mm (minimum) Hairstyling Type Packed With Plastic Pouch 30 210.00 6,300.00 39 Pc Rollers,jumbo Material:plastic Approximately 44mm In Diameter X 64mm Long 30 250.00 7,500.00 40 Pc Scissor Cutting Material:stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm Non Corrosive Packed With Plastic Pouch Branded 36 250.00 9,000.00 41 Pc Scoop Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 36 175.00 6,300.00 42 Pc Shower Cap Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 60 45.00 2,700.00 43 Pc Spatula Material:plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application:hair Waxing Removal Packed With Plastic Pouch 60 90.00 5,400.00 44 Pc Spray Bottle Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 60 75.00 4,500.00 45 Unit Steamer Hair Power 450 Watts (minimum) Rating Is 220 Volts/50- 60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32 Ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Caster With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Branded 15 7,200.00 108,000.00 46 Pc Stool Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges Branded 60 1,820.00 109,200.00 47 Unit Infrared Iron Material: Lonic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch Branded 27 4,593.00 124,011.00 Total 969,510.00 1 Unit Dummy,anatomical 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal, Screws, Posts And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive—system. 5.detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Faciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Pacts), Heart (2) , Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non Toxic Material 11. Carton Box Packaging 3 4800 14,400.00 2 Unit Massage Bed/table Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case Portable And Foldable 30 5500 165,000.00 3 Set Massage Chair 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges 7. Any Color With One Color Only For Whole Lot 30 6,000 180,000.00 4 Pc Sphygmomanometer Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hgindex And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Non Toxic Material 30 2000 60,000.00 5 Pc Stethoscope Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 30 2000 60,000.00 6 Pc Talking Sphygmomanometer Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Non Toxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 30 1500 45,000.00 7 Pc Talking Thermometer Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 30 1400 42,000.00 8 Pc Thermometer, Digital Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 30 350 10,500.00 9 Pc White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 3 6038 18,114.00 Total 595,014.00 Over -all Total 16,580,027.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 1. The Deped, Through The Bids And Awards Committee (bac), Now Invites Bids For The Above Procurement Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Deped Schools Division Office Surigao Del Sur At Telephone/cellphone No. 09853432707 And Inspect The Bidding Documents At The Address Indicated Herein For Issuance Of Bidding Documents During Office Hours. 5. For Those Who Are Interested To Purchase The Bidding Documents, A Complete Set Of Bidding Documents Shall Be Acquired From April 30, 2025 To May 14, 2025 By Interested Bidders From The Bids And Awards Committee Secretariat Deped Sdo –surigao Del Sur Only, Upon Accomplishing A Bidder’s Information Sheet And Payment Of A Non-refundable Fee For The Bidding Documents To The Deped Cashier. Amount Of Bidding Documents Shall Be As Follows: Lot A- Php. 10,000.00 Lot B- Php. 5,000.00 Lot C- Php. 500.00 Lot D- Php. 5,000.00 Lot E- Php. 500.00 Lot F- Php. 1,000.00 Lot G- Php. 1,000.00 6. The Department Of Education - Surigao Del Sur Division Will Hold A Pre-bid Conference On April 30, 2024 (wednesday) 10:00 Pm; 3rd Floor, Division Office Conference Hall, Balilahan, Mabua, Tandag City And Through Video Conferencing Or Webcasting Via Https://tinyurl.com/24ptf4ph Which Shall Be Open To Prospective Bidders. 7. Prospective Bidders Who Intend To Participate Are Required To Communicate With The Bac Secretariat Through Email At Surigaodelsur.procurement@deped.gov.ph For Confirmation And Accomplish The Online Pre-bid Conference Form Provided (annex B) On Or Before April 30, 2024 (wednesday) 10:00 Pm Upon Receipt Of This Form, The Bac Secretariat Will Send The Link Of The Meeting. 8. Submission Of Bids Must Be Dropped At The Drop Box Provided At 3rd Floor Conference Hall Deped Surigao Del Sur Division, Balilahan, Mabua, Tandag City May 14, 2025 (wednesday), At Exactly 1:30 Pm, Philippine Standard Time. Late Bids Shall Not Be Accepted. 9. Drop Off Point Of All Items Should Be In 27 District Offices Of Deped Surigao Del Sur With Free Delivery Cost. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. Bid Opening Shall Be On May 14, 2025 (wednesday), At Exactly 1:30 Pm; 3rd Floor, Division Office Conference Hall, Balilahan, Mabua, Tandag City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity And Also Via Microsoft Teams Https://tinyurl.com/mututj7w For The Purpose Of Constituting A Quorum, Both The Physical And Virtual Presence Of The Bac And Twg Members Shall Be Considered Pursuant To Gppb Resolution No. 09-2020. 12. The Deped - Surigao Del Sur Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Bac Secretariat Balilahan, Mabua, Tandag City Surigaodelsur.procurement@deped.gov.ph 09853432707 Depedsurigaodelsur.com 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/ Https://www.deped.gov.ph/ Date: April 22, 2025 Laila F. Danaque, Edd, Ceso Vi (sgd) Chairperson

Details: Description Request For Quotation (rfq) 1 Lot Inks And Toners Rfq No. 2025-fad-002 The Department Of Environment And Natural Resources – Environmental Management Bureau – National Capital Region (denr-emb-ncr) Hereinafter Referred To As The “purchaser” Now Requests For Submission Of Price Quotations For The Procurement Of The Aforesaid Items Described In The Technical Specifications. The Denr-emb-ncr Intends To Apply The Sum Of Nine Hundred Fifty Thousand And Five Hundred Pesos Only (php 950,500.00) Being The 1 Lotinks And Toners, Rfq No. 2025-fad-002. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. A Set Of Technical Specifications Are Provided In Attachment 1. All Items Listed Under The Purchaser’s Specifications Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Quotation. Small-value Procurement/shopping Procedures Will Be Conducted In Accordance With The Provisions Of The Implementing Rules And Regulations (irr) Of Republic Act 9184. It Is The Intent Of The Purchaser To Evaluate The Bid/quotation On A Per Item Basis, And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. Quotations Must Be Delivered At The Address Below Not Later Than 12:00 P.m. Of February 17 2025. Department Of Environment And Natural Resources Environmental Management Bureau National Capital Region National Ecology Center Compound, East Avenue Diliman, Quezon City Prices Must Be Quoted In Philippine Peso And Must Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. Bid/quotation May Be Typewritten And May Be Placed In A Sealed Envelope Marked The 1 Lot Inks And Toners, Rfq No. 2025-fad-002. Or You May Send Your Bid- Quotation Through Fax (02-9313134) Or E-mail (emb.bacsec.ncr125@gmail.com). Bids/quotations Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. The Delivery Period Shall Be Within Fifteen (15) Calendar Days From Receipt Of The Purchase Order (p.o) And/or Job Order (j.o). The Supplier Should Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. Delivery Sites: See Delivery Sites Enumerated In The Quotation Form Protect Environment | Protect Life Emb-ncr Building, National Ecology Center Compound, East Ave., Diliman, Quezon City 1100 Telephone No.: (02) 8931-1331 | E-mail: Recordsncr@emb.gov.ph | Ncrsupport@emb.gov.ph Website: Www.ncr.emb.gov.ph Department Of Environment And Natural Resources Environmental Management Bureau National Capital Region National Ecology Center Compound, East Avenue, Diliman, Quezon City The Applicable Rate For Late Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. The Purchaser Reserves The Right To Accept Or Reject Any Quotation, And To Annul The Bidding/shopping Process Or Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. The Prospective Bidder Shall Submit The Following: Signed Quotation Form Goods- Technical Specifications And Certification From Regulatory Offices, If Applicable (dole Doh And Etc.) Food Services- Menu Civil Works- Plan, Layout, And Design Proof Of Philgeps Registration; Sec Registration/dti Certificate; Business Permit; Tax Clearance Annual Income Tax Return; Preferably With Proof That The Offered Products/items Are Manufactured By An Iso-9001 And Iso14001 Company Whose Certifications Are Valid On Opening Of Proposal; Preferably In Compliance With Philippine Green Public Procurement Roadmap Of Government Procurement Policy Board (gppb); Letter Of Authenticity Of Manufacturer’s Certification That The Supplier Is An Authorized Reseller/distributor And The Items Are Covered By The Manufacturer’s Warranty Failure To Follow The Above Requirements May Result In Outright Rejection Of Submitted Quotation/s. Awarded Bidder Should Sign The Conforme Within Three (3) Working Days Upon Receipt. Failure To Conform Shall Be The Basis In The Consideration Of Appropriate Responsiveness Of The Bidder, In Which The Procuring Entity Shall Proceed To The Next Lowest Calculated And Responsive Bid. Engr. Divina C. Camarao Bac, Chairperson Attachment 1 Technical Specifications No. Purchaser’s Specifications Quantity / Uom Abc Per Unit Total Abc Rfq No. 2025-fad-002 Hp Toner Cf510a, 204a, Black Hp Toner Cf511a, 204a, Cyan Hp Toner Cf512a, 204a, Yellow Hp Toner Cf513a, 204a, Magenta Hp Toner Cf2310a, 215a, Black Hp Toner Cf2311a, 215a, Cyan Hp Toner Cf2312a, 215a, Yellow Hp Toner Cf2313a, 215a, Magenta Hp680 Ink Black Hp680 Ink Tri Color Hp678 Ink Black Hp678 Ink Tri Color Canon Pg 810 Black, Genuine Canon Cl 811 Tri Color, Genuine 30 Cartridge 50 Cartridge 50 Cartridge 50 Cartridge 20 Cartridge 15 Cartridge 15 Cartridge 15 Cartridge 60 Cartridge 50 Cartridge 20 Cartridge 10 Cartridge 30 Cartridge 30 Cartridge ₱950,500.00 ₱950,500.00 Along With Your Signed Quotation Please Submit The Ff: Philgeps Certificate Dti/ Sec Mayor’s Permit Tax Clearance Annual Income Tax Return Preferably With Proof That The Offered Products / Items Are Manufactured By An Iso-9001 And Iso-14001 Company Whose Certifications Are Valid On The Opening On Proposal. Letter Of Authenticity Of Manufacturer’s Certification That The Supplier Is An Authorized Reseller/distributor And The Items Are Covered By The Manufacturer’s Warranty. Quotation Form Date: Rfq No. Attention: Fad-procurement And Property Management Unit Department Of Environment And Natural Resources Environmental Management Bureau-national Capital Region National Ecology Center Compound East Avenue, Diliman, Quezon City 1) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: No. Description Quantity / Uom Deliver Y Site Unit Price (php) Total Price (php) Rfq No. 2025-fad-002 Hp Toner Cf510a, 204a, Black Hp Toner Cf511a, 204a, Cyan Hp Toner Cf512a, 204a, Yellow Hp Toner Cf513a, 204a, Magenta 30 Cartridge 50 Cartridge 50 Cartridge 50 Cartridge Emb- Ncr Hp Toner Cf2310a, 215a, Black 20 Cartridge Hp Toner Cf2311a, 215a, Cyan 15 Cartridge Hp Toner Cf2312a, 215a, Yellow 15 Cartridge Hp Toner Cf2313a, 215a, Magenta 15 Cartridge Hp680 Ink Black 60 Cartridge Hp680 Ink Tri Color 50 Cartridge Hp678 Ink Black 20 Cartridge Hp678 Ink Tri Color 10 Cartridge Canon Pg 810 Black, Genuine 30 Cartridge Canon Cl 811 Tri Color, Genuine 30 Cartridge We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Fifteen (15)-day Delivery Period From Receipt Purchase Order (p.o) Or Job Order (j.o). We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. We Understand That Payment For Items Delivered Will Be Made To The Winning Supplier After The Inspection And Acceptance Of Goods Delivered. Name Of Company : Postal Address : Email Address : Telephone & Fax No. : Supplier’s Representative : Signature Over Printed Name : Account Name And Branch : Preferably Landbank Account. In Case Of Other Banks, Charges May Apply. Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] Republic Of The Philippines ) City/municipality Of ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [name Of Bidder] Complies With Existing Labor Laws And Standards; And [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: Carefully Examining All Of The Bidding Documents; Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This Day Of , 20 At , Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial] Purchase Request Appendix 60 Department Of Environment & Natural Resources Environmental Management Bureau National Capital Region Fund Cluster: Office/section: Fad-ppmu Pr No.: 2025-01-031 Responsibility Center Code : Date: January 20, 2025 Stock/ Property No. Unit Item Description Quantity Unit Cost Total Cost Cartridge Hp Toner Cf510a, 204a, Black 30 ₱ 3,200.00 ₱96,000.00 Cartridge Hp Toner Cf511a, 204a, Cyan 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf512a, 204a, Yellow 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf513a, 204a, Magenta 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf2310a, 215a, Black 20 ₱ 3,000.00 ₱60,000.00 Cartridge Hp Toner Cf2311a, 215a, Cyan 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp Toner Cf2312a, 215a, Yellow 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp Toner Cf2313a, 215a, Magenta 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp680 Ink Black 60 ₱ 500.00 ₱30,000.00 Cartridge Hp680 Ink Tri Color 50 ₱ 500.00 ₱25,000.00 Cartridge Hp678 Ink Black 20 ₱ 650.00 ₱13,000.00 Cartridge Hp678 Ink Tri Color 10 ₱ 650.00 ₱6,500.00 Cartridge Canon Pg 810 Black, Genuine 30 ₱ 1,000.00 ₱30,000.00 Cartridge Canon Cl 811 Tri Color, Genuine 30 ₱ 1,200.00 ₱36,000.00 Total ₱950,500.00 Charged To Gaa - Regular Fund Code: Funds Available: Christine Joy J. Acaban Unit Head, Budget Purpose: For Official Use Of Emb Ncr Requested By: Approved By: Signature: Printed Name: Gemma G. Carino Engr. Maria Dorica Naz-hipe, Ceso V Designation: Chief,fad Regional Director Date: Purchase Request Appendix 60 Department Of Environment & Natural Resources Environmental Management Bureau National Capital Region Fund Cluster: Office/section: Fad-ppmu Pr No.: 2025-01-031 Responsibility Center Code : Date: January 20, 2025 Stock/ Property No. Unit Item Description Quantity Unit Cost Total Cost Cartridge Hp Toner Cf510a, 204a, Black 30 ₱ 3,200.00 ₱96,000.00 Cartridge Hp Toner Cf511a, 204a, Cyan 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf512a, 204a, Yellow 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf513a, 204a, Magenta 50 ₱ 3,400.00 ₱170,000.00 Cartridge Hp Toner Cf2310a, 215a, Black 20 ₱ 3,000.00 ₱60,000.00 Cartridge Hp Toner Cf2311a, 215a, Cyan 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp Toner Cf2312a, 215a, Yellow 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp Toner Cf2313a, 215a, Magenta 15 ₱ 3,200.00 ₱48,000.00 Cartridge Hp680 Ink Black 60 ₱ 500.00 ₱30,000.00 Cartridge Hp680 Ink Tri Color 50 ₱ 500.00 ₱25,000.00 Cartridge Hp678 Ink Black 20 ₱ 650.00 ₱13,000.00 Cartridge Hp678 Ink Tri Color 10 ₱ 650.00 ₱6,500.00 Cartridge Canon Pg 810 Black, Genuine 30 ₱ 1,000.00 ₱30,000.00 Cartridge Canon Cl 811 Tri Color, Genuine 30 ₱ 1,200.00 ₱36,000.00 Total ₱950,500.00 Charged To Gaa - Regular Fund Code: Funds Available: Christine Joy J. Acaban Unit Head, Budget Purpose: For Official Use Of Emb Ncr Requested By: Approved By: Signature: Printed Name: Gemma G. Carino Engr. Maria Dorica Naz-hipe, Ceso V Designation: Chief,fad Regional Director Date: Engr. Christian Dale E. Formeloza App-cse 2025 Form - Other Items Annual Procurement Plan - Commom-use Supplies And Equipment (app-cse) 2025 Form - Other Items Agency Code/uacs: Contact Person: Agency Name: Designation: Organization Type: Email: Region: Contact Number: Address: Introduction: Reminders: This Form Shall Be Utilized By Government Agencies For Items That Are Not Available In The Ps-dbm Catalogue But Are Regularly Purchased From Other Sources. Information Given In This Form Will Serve As A Survey To Identify The Items That May Be Considered As Cse By The Ps-dbm. The App-cse 2025 Form - Other Items Must Be Accomplished Using Excel Only. The App-cse Form - Other Items Shall Be Deemed Incorrect Or Invalid If The Form Used Is In Other Than The Prescribed Format Which Can Be Downloaded In The Ps-dbm Website (www.ps-philgeps.gov.ph). All Information Must Be Provided Accurately. To Fill-out, Find The Item In The 'list Of Items - 1' Tab Of This File Then Type The Desired Product In The Search Bar (working Only For Mirosoft Excel 2013 Or Higher). Copy The Description, Right Click Then Paste As Values In The Dedicated Column Of The Form 'item Description". You May Also Use The 'list Of Items - 2' Then Press Ctrl + F To Find The Item. If It Is Necessary To Input The Details Of The Product, You May Type It In The 'specification' Column Provided Beside The Item Description.the First One Hundred (100) Rows Are Dedicated Only For This Procedure, While The Remaining Rows Is Open For Editing. You Can Insert Additional Rows After The First 100 If Necessary. Upload The App-cse 2025 Form - Other Items Through The Google Forms Link: Https://shorturl.at/adeqo For Further Assistance Or Clarification, Agencies May Contact The Marketing And Sales Division Of Ps-dbm Through Its Mobile Numbers 0918-2954426 (smart) Or 0962-8255199 (smart), Or Email Appcse.helpdesk@ps- Philgeps.gov.ph, Or Visit The Ps-dbm Website (www.ps-philgeps.gov.ph) For The Guide On How To Fill-out The App-cse The App-cse For Fy 2025 Must Be Submitted On Or Before July 31, 2024 No. Unspsc Item Description Specification (input Specific Features Or Composition Of The Item Such As Dimensions, Color, Or Functions) Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount Other Items Not Available At Ps-dbm But Are Regularly Purchased From Other Sources (note: Please Indicate Price Of Items) 1 - Ink Cartridge, Canon Pg-810 Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 990.00 0.00 2 - Ink Cartridge, Canon Cl-811 Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,300.00 0.00 3 - Toner Cartridge, Canon 054h, 3028c001 Black Cart 1 0 1 2 13,000.00 0 1 0 1 6,500.00 1 1 0 2 13,000.00 0 0 0 0 0.00 5 6,500.00 32,500.00 4 - Toner Cartridge, Canon 054h, 3025c001 Yellow Cart 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 4 6,500.00 26,000.00 5 - Toner Cartridge, Canon 054h, 3026c001 Magenta Cart 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 4 6,500.00 26,000.00 6 - Toner Cartridge, Canon 054h, 3027c001 Cyan Cart 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 0 1 0 1 6,500.00 4 6,500.00 26,000.00 7 - Ink Bottle, Hp Gt53, 1vv22aa Black Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 8 - Ink Bottle, Hp Gt52, M0h54aa Cyan Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 9 - Ink Bottle, Hp Gt52, M0h55aa Magenta Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 10 - Ink Bottle, Hp Gt52, M0h56aa Yellow Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 11 - Toner Cartridge, Hp 202a, Cf500a Black Cart 2 2 1 5 21,000.00 2 2 1 5 21,000.00 2 2 1 5 21,000.00 2 2 1 5 21,000.00 20 4,200.00 84,000.00 12 - Toner Cartridge, Hp 202a, Cf501a Cyan Cart 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 20 5,000.00 100,000.00 13 - Toner Cartridge, Hp 202a, Cf502a Yellow Cart 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 20 5,000.00 100,000.00 14 - Toner Cartridge, Hp 202a, Cf503a Magenta Cart 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 2 2 1 5 25,000.00 20 5,000.00 100,000.00 15 - Toner Cartridge, Hp 204a, Cf510a Black Cart 10 10 10 30 96,000.00 10 10 10 30 96,000.00 5 5 5 15 48,000.00 5 5 5 15 48,000.00 90 3,200.00 288,000.00 16 - Toner Cartridge, Hp204a, Cf511a Cyan Cart 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 60 3,550.00 213,000.00 17 - Toner Cartridge, Hp204a, Cf512a Yellow Cart 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 60 3,550.00 213,000.00 18 - Toner Cartridge, Hp204a, Cf513a Magenta Cart 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 5 5 5 15 53,250.00 60 3,550.00 213,000.00 19 - Toner Cartridge, Hp 107a, W1107a Black Cart 0 5 5 10 25,000.00 0 5 5 10 25,000.00 0 5 5 10 25,000.00 0 5 5 10 25,000.00 40 2,500.00 100,000.00 20 - Toner Cartridge, Hp 85a, Ce285a Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 21 - Toner Cartridge, Hp 79a, Cf279a Black Cart 5 0 5 10 39,750.00 0 0 0 0 0.00 5 0 5 10 39,750.00 0 0 0 0 0.00 20 3,975.00 79,500.00 22 - Toner Cartridge, Hp 215a, W2310a Black Cart 5 5 2 12 37,200.00 5 5 2 12 37,200.00 5 5 2 12 37,200.00 5 5 2 12 37,200.00 48 3,100.00 148,800.00 23 - Toner Cartridge, Hp215a, W2311a Cyan Cart 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 48 3,300.00 158,400.00 24 - Toner Cartridge, Hp215a, W2312a Yellow Cart 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 48 3,300.00 158,400.00 25 - Toner Cartridge, Hp215a, W2313a Magenta Cart 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 5 5 2 12 39,600.00 48 3,300.00 158,400.00 26 - Ink Cartridge, Hp 678, Hpcz107aa Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 600.00 0.00 27 - Ink Cartridge, Hp 678, Hpcz108aa Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 600.00 0.00 28 - Ink Cartridge, Hp 680, F6v27aa Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 600.00 0.00 29 - Ink Cartridge, Hp 680, F6v26aa Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 600.00 0.00 30 - Ink Cartridge, Hp 955, L0s60aa Black Cart 1 1 1 3 4,200.00 1 1 1 3 4,200.00 1 1 1 3 4,200.00 1 1 1 3 4,200.00 12 1,400.00 16,800.00 31 - Ink Cartridge, Hp 955, L0s51aa Cyan Cart 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 12 1,100.00 13,200.00 32 - Ink Cartridge, Hp 955, L0s57aa Yellow Cart 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 12 1,100.00 13,200.00 33 - Ink Cartridge, Hp 955, L0s54aa Magenta Cart 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 1 1 1 3 3,300.00 12 1,100.00 13,200.00 34 - Toner, Epson Wf-c5790 (black, Cyan, Yellow, Magenta) Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 15,000.00 0.00 35 - Ink Cartridge, Epson T289 Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 36 - Ink Cartridge, Epson T290 Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 37 - Ink Bottle, Epson 003, T00v100 Black Bottle 5 5 5 15 3,000.00 5 5 5 15 3,000.00 5 5 5 15 3,000.00 5 5 5 15 3,000.00 60 200.00 12,000.00 38 - Ink Bottle, Epson 003, T00v200 Cyan Bottle 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 40 200.00 8,000.00 39 - Ink Bottle, Epson 003, T00v300 Magenta Bottle 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 40 200.00 8,000.00 40 - Ink Bottle, Epson 003, T00v400 Yellow Bottle 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 5 0 5 10 2,000.00 40 200.00 8,000.00 41 - Ink Bottle, Epson 001, C13t03y100 Black Bottle 0 0 1 1 600.00 0 0 1 1 600.00 0 0 1 1 600.00 0 1 1 2 1,200.00 5 600.00 3,000.00 42 - Ink Bottle, Epson 001, C13t03y200 Cyan Bottle 0 0 1 1 400.00 0 0 1 1 400.00 0 0 1 1 400.00 0 1 1 2 800.00 5 400.00 2,000.00 43 - Ink Bottle, Epson 001, C13t03y300 Magenta Bottle 0 0 1 1 400.00 0 0 1 1 400.00 0 0 1 1 400.00 0 1 1 2 800.00 5 400.00 2,000.00 44 - Ink Bottle, Epson 001, C13t03y400 Yellow Bottle 0 0 1 1 400.00 0 0 1 1 400.00 0 0 1 1 400.00 0 1 1 2 800.00 5 400.00 2,000.00 45 - Ink Bottle, Epson 005, T03q100 Black Bottle 1 1 1 3 2,400.00 1 1 1 3 2,400.00 1 1 1 3 2,400.00 1 1 1 3 2,400.00 12 800.00 9,600.00 46 - Ink Bottle, Epson 664, C13t664100 Black Bottle 0 0 5 5 2,000.00 0 0 10 10 4,000.00 0 0 5 5 2,000.00 0 0 10 10 4,000.00 30 400.00 12,000.00 47 - Ink Bottle, Epson 664, C13t664200 Cyan Bottle 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 20 400.00 8,000.00 48 - Ink Bottle, Epson 664, C13t664300 Magenta Bottle 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 20 400.00 8,000.00 49 - Ink Bottle, Epson 664, C13t664400 Yellow Bottle 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 0 0 5 5 2,000.00 20 400.00 8,000.00 No. Unspsc Item Description Specification (input Specific Features Or Composition Of The Item Such As Dimensions, Color, Or Functions) Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount Other Items Not Available At Ps-dbm But Are Regularly Purchased From Other Sources (note: Please Indicate Price Of Items) 50 - Ink Bottle, Epson 673, T6731 Black Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 51 - Ink Bottle, Epson 673, T6732 Cyan Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 52 - Ink Bottle, Epson 673, T6733 Magenta Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 53 - Ink Bottle, Epson 673, T6734 Yellow Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 54 - Ink Bottle, Epson 673, T6735 Light Cyan Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 55 - Ink Bottle, Epson 673, T6736 Light Magenta Bottle 0 0 0 0 0.00 1 0 0 1 0.00 0 0 0 0 0.00 1 0 0 1 0.00 2 0.00 0.00 56 - Ribbon Cartridge, Epson Lx310, S015632 Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 57 - Ribbon Cartridge, Epson Lq2190, S015531/s015086 Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 58 - Toner Cartridge, Lexmark Network Printer, 58d3h00 Black Cart 0 0 3 3 54,000.00 0 0 0 0 0.00 0 0 3 3 54,000.00 0 0 0 0 0.00 6 18,000.00 108,000.00 59 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 60 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 61 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 62 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 63 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 64 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 65 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 66 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 67 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 68 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 69 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 70 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 71 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 72 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 73 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 74 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 75 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 76 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 77 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 78 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 79 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 80 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 81 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 82 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 83 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 84 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 85 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 86 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 87 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 88 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 89 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 90 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 91 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 92 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 93 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 94 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 95 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 96 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 97 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 98 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 99 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 100 - 0 0.00 0 0.00 0 0.00 0 0.00 0 0.00 0.00 No. Unspsc Item Description Specification (input Specific Features Or Composition Of The Item Such As Dimensions, Color, Or Functions) Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount Other Items Not Available At Ps-dbm But Are Regularly Purchased From Other Sources (note: Please Indicate Price Of Items) A. Total ₱ 2,480,000.00 B. Additional Provision For Inflation (10% Of Total) ₱ 248,000.00 C. Additional Provision For Transport And Freight Cost (if Applicable) ₱ - D. Grand Total (a + B+ C) ₱ 2,728,000.00 E. Approved Budget By The Agency Head In Figures And Words: We Hereby Warrant That The Total Amount Reflected In This Annual Procurement Plan To Procure The Listed Common-use Supplies, Materials, And Equipment Has Been Included In Or Is Within Our Approved Budget For The Year. Prepared By: Certified Funds Available / Certified Appropriate Funds Available: Approved By: Jodi Hani C. Leal / Cesar D. Tolentino Property/supply Officer Accountant / Budget Officer Date Prepared: Introduction: App-cse 2025 Form Annual Procurement Plan - Commom-use Supplies And Equipment (app-cse) 2025 Form This Form Contains The Common-use Supplies And Equipment (cse) Being Carried By The Procurement Service – Department Of Budget And Management (ps-dbm) That Shall Be Purchased By Government Agencies. Consistent With The Dbm Circular Letter Nos. 2011-6 And 2011-6-a Dated 25 August 2011 And 28 September 2011, Respectively, The App-cse Shall Serve As The Agency’s Annual Procurement Request For All Its Cse Requirements. Only Agencies With Uploaded App-cse In The Modernized Philippine Government Electronic Procurement System (mphilgeps) Will Be Able To Purchase Cse From The Ps-dbm. Note That The Items Listed On This Form Have Been Arranged In Accordance With The United Nations Standard Products And Services Code (unspsc). Reminders: 1.0 2.0 3.0 The App-cse Form Must Be Accomplished Using Microsoft Excel Format. The App-cse Shall Be Deemed Incorrect Or Invalid If The Form Used Is Other Than The Prescribed Format Which Is Downloadable From The Mphilgeps And Downloads Page Of Ps-dbm Website (www.ps-philgeps.gov.ph). All Information Must Be Provided Accurately. Kindly Refer To The Cse Catalogue On The Ps-dbm Website (www.ps-philgeps.gov.ph) Under The "what We Sell" Tab For The Detailed Technical Specifications And Sample Photo Of The Items. 4.0 Do Not Delete, Add, Or Revise Any Items Or Rows On This Form, Otherwise The Form Will Be Deemed Invalid. 5.0 6.0 7.0 8.0 For Items Not Included On The List Of Part Ii, A Separate File, With The File Name App-cse 2025 Form - Other Items, Can Be Downloaded From The Downloads Page Of Ps-dbm Website (www.ps-philgeps.gov.ph) And Must Be Submitted To Ps-dbm Through This Link: Https://shorturl.at/adeqo. Instructions On How To Fill-out Is Included In The Reminders Of The Form. Once Signed And Approved By The Property/supply Officer, Accountant/budget Officer, And Head Of The Agency/office, Kindly Upload The Soft Copy Of The App-cse In Microsoft Excel Format As Well As The Original Signed Copy In Portable Document Format (pdf) To The Agency's Mphilgeps Account On Or Before The Prescribed Period Or Deadline. Any App-cse Form That Is Unsigned Or Has Incomplete Signature Shall Be Deemed Invalid. Should There Be Changes In The Agency’s Cse Requirements, The Agency May Edit Their Uploaded App-cse Directly On Their Mphilgeps Account. However, The Agency Must Ensure That A Signed And Approved Copy Of The Supplemental App-cse Form Is Available. Note That All Cse Requirements In Excess Of The Quantities Indicated In The Original App-cse Form Will Not Be Served If Not Covered By A Supplemental App-cse. For Further Assistance Or Clarification, Agencies May Contact The Marketing And Sales Division Of Ps-dbm Through Its Mobile Numbers 0918-2954426 (smart) Or 0962-8255199 (smart), Or Email Appcse.helpdesk@ps-philgeps.gov.ph, Or Visit The Ps-dbm Website (www.ps-philgeps.gov.ph) For The Guide On How To Fill-out The App-cse. Environmental Management B Ncr Nec Cmpd., East Ave., Brgy. Central, Quezon City Joy Anne Marie A. Mancera Head, Ppmu Ppmudivision03@gmail.com 8931-13-31 Note: The App-cse For Fy 2025 Must Be Submitted On Or Before 31 July 2024. Department/bureau/office: Agency Code/uacs: Contact Person: Region: Organization Type: Position: Address: E-mail : Telephone/mobile Nos: Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount Part I. Available At Ps-dbm (main Warehouse And Depots) Alcohol Or Acetone Based Antiseptics 1 12191601-al-e04 Alcohol, Ethyl, 500 Ml Bottle 0 0 0 0 0.00 70 70 70 210 10,590.30 0 0 0 0 0.00 70 70 70 210 10,590.30 420 50.43 21,180.60 2 12191601-al-e03 Alcohol, Ethyl, 1 Gallon Gallon 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 357.09 0.00 Arts And Crafts Equipment And Accessories And Supplies 3 60121413-cb-p01 Clearbook, A4 Size Piece 0 12 0 12 421.92 0 12 0 12 421.92 0 12 0 12 421.92 0 12 0 12 421.92 48 35.16 1,687.68 4 60121413-cb-p02 Clearbook, Legal Size Piece 0 12 0 12 436.32 0 12 0 12 436.32 0 12 0 12 436.32 0 12 0 12 436.32 48 36.36 1,745.28 5 60121534-er-p01 Eraser, Plastic/rubber Piece 0 10 0 10 82.60 0 10 0 10 82.60 0 10 0 10 82.60 0 10 0 10 82.60 40 8.26 330.40 6 60121524-sp-g01 Sign Pen, Extra Fine Tip, Black Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 22.20 0.00 7 60121524-sp-g04 Sign Pen, Fine Tip, Black Piece 30 30 30 90 4,024.80 30 30 30 90 4,024.80 30 30 30 90 4,024.80 30 30 30 90 4,024.80 360 44.72 16,099.20 8 60121524-sp-g07 Sign Pen, Medium Tip, Black Piece 30 30 30 90 5,148.00 30 30 30 90 5,148.00 30 30 30 90 5,148.00 30 30 30 90 5,148.00 360 57.20 20,592.00 9 60121524-sp-g02 Sign Pen, Extra Fine Tip, Blue Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 22.20 0.00 10 60121524-sp-g05 Sign Pen, Fine Tip, Blue Piece 50 50 50 150 6,708.00 50 50 50 150 6,708.00 50 50 50 150 6,708.00 50 50 50 150 6,708.00 600 44.72 26,832.00 11 60121524-sp-g08 Sign Pen, Medium Tip, Blue Piece 80 80 80 240 13,728.00 80 80 80 240 13,728.00 80 80 80 240 13,728.00 80 80 80 240 13,728.00 960 57.20 54,912.00 12 60121524-sp-g03 Sign Pen, Extra Fine Tip, Red Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 22.20 0.00 13 60121524-sp-g06 Sign Pen, Fine Tip, Red Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 45.76 0.00 14 60121524-sp-g09 Sign Pen, Medium Tip, Red Piece 12 12 12 36 2,059.20 12 12 12 36 2,059.20 12 12 12 36 2,059.20 12 12 12 36 2,059.20 144 57.20 8,236.80 15 60121124-wr-p01 Wrapping Paper Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 161.20 0.00 Audio And Visual Equipment And Supplies 16 45121517-do-c03 Document Camera Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 23,623.60 0.00 17 45111609-mm-p01 Multimedia Projector Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 16,588.00 0.00 Batteries And Cells And Accessories 18 26111702-bt-a02 Battery, Dry Cell, Size Aa Pack 100 100 100 300 6,147.00 100 100 100 300 6,147.00 100 100 100 300 6,147.00 100 100 100 300 6,147.00 1200 20.49 24,588.00 19 26111702-bt-a01 Battery, Dry Cell, Size Aaa Pack 100 100 100 300 5,502.00 100 100 100 300 5,502.00 100 100 100 300 5,502.00 100 100 100 300 5,502.00 1200 18.34 22,008.00 Cleaning Equipment And Supplies 20 47131812-af-a01 Air Freshener Can 12 12 12 36 3,143.16 12 12 12 36 3,143.16 12 12 12 36 3,143.16 12 12 12 36 3,143.16 144 87.31 12,572.64 21 47131604-br-s01 Broom (walis Tambo) Piece 8 8 8 24 2,995.20 8 8 8 24 2,995.20 8 8 8 24 2,995.20 8 8 8 24 2,995.20 96 124.80 11,980.80 22 47131604-br-t01 Broom (walis Ting-ting) Piece 12 12 12 36 936.00 12 12 12 36 936.00 12 12 12 36 936.00 12 12 12 36 936.00 144 26.00 3,744.00 23 47131829-tb-c01 Cleaner, Toilet Bowl And Urinal Bottle 10 10 10 30 1,248.00 10 10 10 30 1,248.00 10 10 10 30 1,248.00 10 10 10 30 1,248.00 120 41.60 4,992.00 24 47131805-cl-p01 Cleanser, Scouring Powder Plastic Container 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 23.92 0.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 25 47131811-de-b02 Detergent Bar Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9.34 0.00 26 47131811-de-p02 Detergent Powder, All Purpose Pouch 35 35 35 105 5,678.40 35 35 35 105 5,678.40 35 35 35 105 5,678.40 35 35 35 105 5,678.40 420 54.08 22,713.60 27 47131803-ds-a01 Disinfectant Spray Can 12 12 12 36 5,036.04 12 12 12 36 5,036.04 12 12 12 36 5,036.04 12 12 12 36 5,036.04 144 139.89 20,144.16 28 47131601-du-p01 Dust Pan Piece 0 0 10 10 468.00 0 0 10 10 468.00 0 0 10 10 468.00 0 0 10 10 468.00 40 46.80 1,872.00 29 47131802-fw-p03 Floor Wax, Paste Type, Red Can 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 309.76 0.00 30 47131830-fc-a01 Furniture Cleaner Can 4 4 4 12 1,696.68 4 4 4 12 1,696.68 4 4 4 12 1,696.68 4 4 4 12 1,696.68 48 141.39 6,786.72 31 73101612-hs-l01 Hand Soap, Liquid, 500ml Bottle 40 40 40 120 5,154.00 40 40 40 120 5,154.00 40 40 40 120 5,154.00 40 40 40 120 5,154.00 480 42.95 20,616.00 32 47121804-mp-b01 Mop Bucket Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,288.00 0.00 33 47131501-rg-c01 Rags Kilo 0 0 0 0 0.00 0 0 0 0 0.00 0 12 0 12 833.64 0 12 0 12 833.64 24 69.47 1,667.28 34 47131602-sc-n01 Scouring Pad Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 85.63 0.00 35 47121701-tb-p04 Trashbag, Xxl Size Roll/pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 130.00 0.00 36 47121701-tb-p05 Trashbag, Large Size Roll/pack 50 50 50 150 8,892.00 50 50 50 150 8,892.00 50 50 50 150 8,892.00 50 50 50 150 8,892.00 600 59.28 35,568.00 37 47121701-tb-p06 Trashbag, Xl Size Roll/pack 50 50 50 150 13,884.00 50 50 50 150 13,884.00 50 50 50 150 13,884.00 50 50 50 150 13,884.00 600 92.56 55,536.00 38 47121702-wb-p01 Wastebasket Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 43.68 0.00 Color Compounds And Dispersions 39 12171703-si-p01 Ink, For Stamp Pad Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 28.79 0.00 Consumer Electronics 40 52161535-dv-r02 Digital Voice Recorder Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,339.16 0.00 Films 41 13111203-ac-f01 Acetate Roll 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,243.84 0.00 42 13111201-cf-p02 Carbon Film, Legal Size Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 351.83 0.00 Fire Fighting Equipment 43 46191601-fe-m01 Fire Extinguisher, Dry Chemical Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,144.00 0.00 Flag Or Accessories 44 55121905-ph-f01 Philippine National Flag Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 1 0 1 284.84 0 0 0 0 0.00 1 284.84 284.84 Furniture And Furnishings 45 56101504-cm-b01 Monobloc Chair, Beige Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 341.12 0.00 46 56101504-cm-w01 Monobloc Chair, White Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 341.12 0.00 Heating And Ventilation And Air Circulation 47 40101604-ef-c01 Electric Fan, Ceiling Mount, Orbit Type Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,222.00 0.00 48 40101604-ef-g01 Electric Fan, Industrial, Ground Type Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,109.68 0.00 49 40101604-ef-s01 Electric Fan, Stand Type Unit 0 0 1 1 1,560.00 0 0 1 1 1,560.00 0 0 1 1 1,560.00 0 0 1 1 1,560.00 4 1,560.00 6,240.00 50 40101604-ef-w01 Electric Fan, Wall Mount Unit 0 0 1 1 901.68 0 0 1 1 901.68 0 0 1 1 901.68 0 0 1 1 901.68 4 901.68 3,606.72 Information And Communication Technology (ict) Equipment And Devices And Accessories 51 43211507-dsk003 Desktop, For Basic Users Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 24,793.60 0.00 52 43211507-dsk004 Desktop, For Mid-range Users Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 42,390.40 0.00 53 43201827-hd-x02 External Hard Drive Unit 5 0 5 10 30,149.60 5 0 5 10 30,149.60 5 0 5 10 30,149.60 5 0 5 10 30,149.60 40 3,014.96 120,598.40 54 43202010-fd-u04 Flash Drive Piece 5 5 5 15 2,291.10 5 5 5 15 2,291.10 5 5 5 15 2,291.10 5 5 5 15 2,291.10 60 152.74 9,164.40 55 43211503-lap004 Laptop Computer, For Mid-range Users Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 42,380.00 0.00 56 43211503-lap003 Laptop Computer, Lightweight Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 46,800.00 0.00 57 43211708-mo-o02 Computer Mouse, Wireless Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 161.92 0.00 58 43212105-pr-l01 Printer, Laser, Monochrome Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,636.89 0.00 Lighting And Fixtures And Accessories 59 39101628-lb-l01 Light-emitting Diode (led) Light Bulb, 7 Watts Piece 12 12 12 36 2,721.96 12 12 12 36 2,721.96 12 12 12 36 2,721.96 12 12 12 36 2,721.96 144 75.61 10,887.84 60 39101628-lt-l01 Light-emitting Diode (led) Linear Tube, 18 Watts Piece 30 30 30 90 18,523.80 30 30 30 90 18,523.80 30 30 30 90 18,523.80 30 30 30 90 18,523.80 360 205.82 74,095.20 Manufacturing Components And Supplies 61 31201610-gl-j02 Glue, All-purpose Bottle 0 0 10 10 621.40 0 0 10 10 621.40 0 0 10 10 621.40 0 0 10 10 621.40 40 62.14 2,485.60 62 31151804-sw-h01 Staple Wire, Heavy Duty (binder Type), 23/13 Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 36.40 0.00 63 31151804-sw-s01 Staple Wire, Standard Box 10 10 10 30 712.80 10 10 10 30 712.80 10 10 10 30 712.80 10 10 10 30 712.80 120 23.76 2,851.20 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 64 31201502-ta-e02 Tape, Electrical Roll 0 0 20 20 389.00 0 0 20 20 389.00 0 0 20 20 389.00 0 0 20 20 389.00 80 19.45 1,556.00 65 31201503-ta-m01 Tape, Masking, 24mm Roll 30 30 30 90 5,011.20 30 30 30 90 5,011.20 30 30 30 90 5,011.20 30 30 30 90 5,011.20 360 55.68 20,044.80 66 31201503-ta-m02 Tape, Masking, 48 Mm Roll 50 50 50 150 18,174.00 50 50 50 150 18,174.00 50 50 50 150 18,174.00 50 50 50 150 18,174.00 600 121.16 72,696.00 67 31201517-ta-p01 Tape, Packaging, 48 Mm Roll 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 22.36 0.00 68 31201512-ta-t01 Tape, Transparent, 24mm Roll 0 0 30 30 530.40 0 0 30 30 530.40 0 0 30 30 530.40 0 0 30 30 530.40 120 17.68 2,121.60 69 31201512-ta-t02 Tape, Transparent, 48 Mm Roll 0 0 30 30 677.10 0 0 30 30 677.10 0 0 30 30 677.10 0 0 30 30 677.10 120 22.57 2,708.40 70 31151507-tw-p01 Twine, Plastic Roll 0 0 10 10 666.20 0 0 0 0 0.00 0 0 10 10 666.20 0 0 0 0 0.00 20 66.62 1,332.40 Measuring And Observing And Testing Equipment 71 41111604-ru-p02 Ruler, Plastic, 450mm Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 19.93 0.00 Office Equipment And Accessories And Supplies 72 44121612-bl-h01 Blade, For General Purpose Cutter/utility Knife Tube 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 16.37 0.00 73 44101602-pb-m01 Binding And Punching Machine Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9,534.72 0.00 74 44122037-rb-p10 Binding Ring/comb, Plastic, 32 Mm Bundle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 259.89 0.00 75 44101807-ca-c01 Calculator, Compact Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 235.77 0.00 76 44121710-ch-w01 Chalk, White Enamel Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 32.97 0.00 77 44122105-bf-c01 Clip, Backfold, 19mm Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9.36 0.00 78 44122105-bf-c02 Clip, Backfold, 25mm Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 15.60 0.00 79 44122105-bf-c03 Clip, Backfold, 32mm Box 12 12 12 36 1,198.08 12 12 12 36 1,198.08 12 12 12 36 1,198.08 12 12 12 36 1,198.08 144 33.28 4,792.32 80 44122105-bf-c04 Clip, Backfold, 50mm Box 12 12 12 36 2,171.52 12 12 12 36 2,171.52 12 12 12 36 2,171.52 12 12 12 36 2,171.52 144 60.32 8,686.08 81 44121801-ct-r02 Correction Tape Piece 40 40 40 120 1,620.00 40 40 40 120 1,620.00 40 40 40 120 1,620.00 40 40 40 120 1,620.00 480 13.50 6,480.00 82 44121612-cu-h01 Cutter/utility Knife, For General Purpose Piece 0 0 5 5 158.60 0 0 5 5 158.60 0 0 5 5 158.60 0 0 5 5 158.60 20 31.72 634.40 83 44111515-df-b01 Data File Box Piece 0 0 10 10 1,458.90 0 0 10 10 1,458.90 0 0 10 10 1,458.90 0 0 10 10 1,458.90 40 145.89 5,835.60 84 44122011-df-f01 Data Folder Piece 50 50 50 150 12,451.50 50 50 50 150 12,451.50 50 50 50 150 12,451.50 50 50 50 150 12,451.50 600 83.01 49,806.00 85 44103202-ds-m01 Dater Stamp Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 434.95 0.00 86 44121506-en-d01 Envelope, Documentary, A4 Box 0 0 0 0 0.00 0 0 5 5 4,149.60 0 0 5 5 4,149.60 0 0 5 5 4,149.60 15 829.92 12,448.80 87 44121506-en-d02 Envelope, Documentary, Legal, Box 5 0 5 10 10,575.80 5 0 5 10 10,575.80 5 0 5 10 10,575.80 5 0 5 10 10,575.80 40 1,057.58 42,303.20 88 44121506-en-x01 Envelope, Expanding, Kraft Box 5 0 5 10 9,399.50 5 0 5 10 9,399.50 5 0 5 10 9,399.50 5 0 5 10 9,399.50 40 939.95 37,598.00 89 44121506-en-x02 Envelope, Expanding, Plastic Piece 0 0 0 0 0.00 0 0 10 10 304.90 0 0 10 10 304.90 0 0 10 10 304.90 30 30.49 914.70 90 44121506-en-m02 Envelope, Mailing Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 432.52 0.00 91 44121504-en-w02 Envelope, Mailing, With Window Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 512.72 0.00 92 44111912-er-b01 Eraser, Felt, For Blackboard/whiteboard Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 14.48 0.00 93 44122118-fa-p01 Fastener Box 30 30 30 90 8,517.60 30 30 30 90 8,517.60 30 30 30 90 8,517.60 30 30 30 90 8,517.60 360 94.64 34,070.40 94 44111515-fo-x01 File Organizer, Expanding, Plastic, Legal Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 90.20 0.00 95 44122018-ft-d01 File Tab Divider, A4 Set 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 11.13 0.00 96 44122018-ft-d02 File Tab Divider, Legal Set 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 14.23 0.00 97 44122011-fo-f01 Folder, Fancy With Slide, A4 Bundle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 270.40 0.00 98 44122011-fo-f02 Folder, Fancy With Slide, Legal Bundle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 291.20 0.00 99 44122011-fo-l01 Folder, L-type, A4 Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 200.28 0.00 100 44122011-fo-l02 Folder, L-type, Legal Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 249.08 0.00 101 44122027-fo-p01 Folder, Pressboard Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 952.64 0.00 102 44122011-fo-t01 Folder With Tab, A4 Pack 0 0 5 5 1,898.00 0 0 5 5 1,898.00 0 0 5 5 1,898.00 0 0 5 5 1,898.00 20 379.60 7,592.00 103 44122011-fo-t02 Folder With Tab, Legal Pack 0 0 10 10 4,139.20 0 0 10 10 4,139.20 0 0 10 10 4,139.20 0 0 10 10 4,139.20 40 413.92 16,556.80 104 44122008-it-t01 Index Tab Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 67.60 0.00 105 44121716-ma-f01 Marker, Flourescent Set 20 20 20 60 1,866.60 20 20 20 60 1,866.60 20 20 20 60 1,866.60 20 20 20 60 1,866.60 240 31.11 7,466.40 106 44121708-mp-b01 Marker, Permanent, Black Piece 60 60 60 180 1,488.60 60 60 60 180 1,488.60 60 60 60 180 1,488.60 60 60 60 180 1,488.60 720 8.27 5,954.40 107 44121708-mp-b02 Marker, Permanent, Blue Piece 60 60 60 180 1,488.60 60 60 60 180 1,488.60 60 60 60 180 1,488.60 60 60 60 180 1,488.60 720 8.27 5,954.40 108 44121708-mp-b03 Marker, Permanent, Red Piece 0 0 12 12 99.24 0 0 12 12 99.24 0 0 12 12 99.24 0 0 12 12 99.24 48 8.27 396.96 109 44121708-mw-b01 Marker, Whiteboard, Black Piece 15 15 15 45 434.25 15 15 15 45 434.25 15 15 15 45 434.25 15 15 15 45 434.25 180 9.65 1,737.00 110 44121708-mw-b02 Marker, Whiteboard, Blue Piece 15 15 15 45 434.25 15 15 15 45 434.25 15 15 15 45 434.25 15 15 15 45 434.25 180 9.65 1,737.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 111 44121708-mw-b03 Marker, Whiteboard, Red Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9.65 0.00 112 44122104-pc-g01 Paper Clip, Vinly/plastic Coated, 33mm Box 15 15 15 45 396.90 15 15 15 45 396.90 15 15 15 45 396.90 15 15 15 45 396.90 180 8.82 1,587.60 113 44122104-pc-j02 Paper Clip, Vinly/plastic Coated, Jumbo, 50mm Box 15 15 15 45 875.70 15 15 15 45 875.70 15 15 15 45 875.70 15 15 15 45 875.70 180 19.46 3,502.80 114 44101603-ps-m02 Paper Shredder Unit 0 0 1 1 18,718.96 0 0 0 0 0.00 0 0 1 1 18,718.96 0 0 0 0 0.00 2 18,718.96 37,437.92 115 44101601-pt-m02 Paper Trimmer/cutting Machine Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9,297.60 0.00 116 44121706-pe-l01 Pencil, Lead/graphite, With Eraser Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 44.71 0.00 117 44121619-ps-m01 Pencil Sharpener Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 236.08 0.00 118 44101602-pu-p01 Puncher, Paper, Heavy Duty Piece 5 5 5 15 2,308.80 5 5 5 15 2,308.80 5 5 5 15 2,308.80 5 5 5 15 2,308.80 60 153.92 9,235.20 119 44122101-ru-b01 Rubber Band No. 18 Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 135.20 0.00 120 44121905-sp-f01 Stamp Pad, Felt Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 39.92 0.00 121 44121618-ss-s01 Scissors, Symmetrical/asymmetrical Pair 5 5 5 15 982.80 5 5 5 15 982.80 5 5 5 15 982.80 5 5 5 15 982.80 60 65.52 3,931.20 122 44121615-st-s01 Stapler, Standard Type Piece 0 0 10 10 1,976.00 0 0 10 10 1,976.00 0 0 10 10 1,976.00 0 0 10 10 1,976.00 40 197.60 7,904.00 123 44121615-st-b01 Stapler, Heavy Duty (binder) Unit 0 0 1 1 693.15 0 0 0 0 0.00 0 0 1 1 693.15 0 0 0 0 0.00 2 693.15 1,386.30 124 44121613-sr-p02 Staple Remover, Plier-type Piece 15 15 15 45 2,092.95 15 15 15 45 2,092.95 15 15 15 45 2,092.95 15 15 15 45 2,092.95 180 46.51 8,371.80 125 44121605-td-t01 Tape Dispenser, Table Top Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 77.58 0.00 Paper Materials And Products 126 14111525-ca-a01 Cartolina, Assorted Colors Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 83.72 0.00 127 14111506-cf-l11 Computer Continuous Form, 1 Ply, 280mm X 241mm Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 945.36 0.00 128 14111506-cf-l12 Computer Continuous Form, 1 Ply, 280mm X 378mm Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,973.92 0.00 129 14111514-np-s02 Notepad, Stick-on, 50mm X 76mm Pad 30 30 30 90 3,335.40 30 30 30 90 3,335.40 30 30 30 90 3,335.40 30 30 30 90 3,335.40 360 37.06 13,341.60 130 14111514-np-s04 Notepad, Stick-on, 76mm X 100mm Pad 30 30 30 90 5,335.20 30 30 30 90 5,335.20 30 30 30 90 5,335.20 30 30 30 90 5,335.20 360 59.28 21,340.80 131 14111514-np-s03 Notepad, Stick-on, 76mm X 76mm Pad 30 30 30 90 4,680.00 30 30 30 90 4,680.00 30 30 30 90 4,680.00 30 30 30 90 4,680.00 360 52.00 18,720.00 132 14111514-nb-s02 Steno Notebook Piece 0 0 20 20 280.80 0 0 20 20 280.80 0 0 20 20 280.80 0 0 20 20 280.80 80 14.04 1,123.20 133 14111507-pp-m01 Paper, Multicopy A4 Ream 50 50 50 150 32,070.00 50 50 50 150 32,070.00 50 50 50 150 32,070.00 50 50 50 150 32,070.00 600 213.80 128,280.00 134 14111507-pp-m02 Paper, Multicopy Legal Ream 10 10 10 30 6,988.80 10 10 10 30 6,988.80 10 10 10 30 6,988.80 10 10 10 30 6,988.80 120 232.96 27,955.20 135 14111507-pp-c01 Paper, Multipurpose A4 Ream 50 50 50 150 20,661.00 50 50 50 150 20,661.00 50 50 50 150 20,661.00 50 50 50 150 20,661.00 600 137.74 82,644.00 136 14111507-pp-c02 Paper, Multipurpose Legal Ream 10 10 10 30 4,767.30 10 10 10 30 4,767.30 10 10 10 30 4,767.30 10 10 10 30 4,767.30 120 158.91 19,069.20 137 14111531-pp-r01 Pad Paper, Ruled Pad 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 34.82 0.00 138 14111503-pa-p01 Paper, Parchment Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 154.21 0.00 139 14111531-re-b01 Record Book, 300 Pages Book 10 10 10 30 2,751.00 10 10 10 30 2,751.00 10 10 10 30 2,751.00 10 10 10 30 2,751.00 120 91.70 11,004.00 140 14111531-re-b02 Record Book, 500 Pages Book 20 20 20 60 7,473.60 20 20 20 60 7,473.60 20 20 20 60 7,473.60 20 20 20 60 7,473.60 240 124.56 29,894.40 141 14111704-tt-p04 Tissue, Interfolded Paper Towel Pack 100 100 100 300 10,140.00 100 100 100 300 10,140.00 100 100 100 300 10,140.00 100 100 100 300 10,140.00 1200 33.80 40,560.00 142 14111704-tt-p02 Toilet Tissue Paper, 2 Ply Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 99.84 0.00 Perfumes Or Colognes Or Fragrances 143 53131626-hs-s01 Hand Sanitizer Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 85.08 0.00 Pesticides Or Pest Repellents 144 10191509-in-a01 Insecticide Can 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 139.36 0.00 Printed Publications 145 55101524-ra-h01 Handbook On Philippine Government Procurement (ra 9184 And Its Irr) Book 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 37.21 0.00 Printer Or Facsimile Or Photocopier Supplies (consumables) 1 44103109-br-d05 Drum Cartridge, Brother Dr-3455, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 6,947.20 0.00 2 44103105-ca-c04 Ink Cartridge, Canon Cl-741, Colored Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,126.32 0.00 3 44103105-ca-c02 Ink Cartridge, Canon Cl-811, Colored Cart 10 10 10 30 35,349.60 10 10 10 30 35,349.60 10 10 10 30 35,349.60 10 10 10 30 35,349.60 120 1,178.32 141,398.40 4 44103105-ca-b04 Ink Cartridge, Canon Pg-740, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 861.12 0.00 5 44103105-ca-b02 Ink Cartridge, Canon Pg-810, Black Cart 20 20 20 60 53,539.20 20 20 20 60 53,539.20 20 20 20 60 53,539.20 20 20 20 60 53,539.20 240 892.32 214,156.80 6 44103105-ep-b17 Ink Cartridge, Epson C13t664100 (t6641), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 231.90 0.00 7 44103105-ep-c17 Ink Cartridge, Epson C13t664200 (t6642), Cyan Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 242.20 0.00 8 44103105-ep-m17 Ink Cartridge, Epson C13t664300 (t6643), Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 242.20 0.00 9 44103105-ep-y17 Ink Cartridge, Epson C13t664400 (t6644), Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 242.20 0.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 10 44103105-hp-b40 Ink Cartridge, Hp C2p04aa (hp62), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 852.80 0.00 11 44103105-hp-t40 Ink Cartridge, Hp C2p06aa (hp62), Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,048.32 0.00 12 44103105-hp-b09 Ink Cartridge, Hp C9351aa (hp21), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 910.00 0.00 13 44103105-hp-t10 Ink Cartridge, Hp C9352aa (hp22), Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,053.52 0.00 14 44103105-hp-b17 Ink Cartridge, Hp Cc640wa (hp60), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 880.88 0.00 15 44103105-hp-t17 Ink Cartridge, Hp Cc643wa (hp60), Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,047.28 0.00 16 44103105-hx-c40 Ink Cartridge, Hp Cd972aa (hp920xl), Cyan Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 823.68 0.00 17 44103105-hx-m40 Ink Cartridge, Hp Cd973aa (hp920xl), Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 823.68 0.00 18 44103105-hx-y40 Ink Cartridge, Hp Cd974aa (hp920xl), Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 823.68 0.00 19 44103105-hx-b40 Ink Cartridge, Hp Cd975aa (hp920xl), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,541.28 0.00 20 44103105-hp-b20 Ink Cartridge, Hp Ch561wa (hp61), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 865.28 0.00 21 44103105-hp-t20 Ink Cartridge, Hp Ch562wa (hp61), Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,066.00 0.00 22 44103105-hx-b43 Ink Cartridge, Hp Cn045aa (hp950xl), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,970.80 0.00 23 44103105-hx-c43 Ink Cartridge, Hp Cn046aa (hp951xl), Cyan Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,517.36 0.00 24 44103105-hx-m43 Ink Cartridge, Hp Cn047aa (hp951xl), Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,517.36 0.00 25 44103105-hx-y43 Ink Cartridge, Hp Cn048aa (hp951xl), Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,517.36 0.00 26 44103105-hp-b36 Ink Cartridge, Hp Cn692aa (hp704), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 419.12 0.00 27 44103105-hp-t36 Ink Cartridge, Hp Cn693aa (hp704), Tri-color Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 419.12 0.00 28 44103105-hp-b33 Ink Cartridge, Hp Cz107aa (hp678), Black Cart 5 5 5 15 6,068.40 5 5 5 15 6,068.40 5 5 5 15 6,068.40 5 5 5 15 6,068.40 60 404.56 24,273.60 29 44103105-hp-t33 Ink Cartridge, Hp Cz108aa (hp678), Tri-color Cart 5 5 5 15 6,068.40 5 5 5 15 6,068.40 5 5 5 15 6,068.40 5 5 5 15 6,068.40 60 404.56 24,273.60 30 44103105-hp-t43 Ink Cartridge, Hp F6v26aa (hp680), Tri-color Cart 20 20 20 60 25,459.20 20 20 20 60 25,459.20 20 20 20 60 25,459.20 20 20 20 60 25,459.20 240 424.32 101,836.80 31 44103105-hp-b43 Ink Cartridge, Hp F6v27aa (hp680), Black Cart 25 25 25 75 31,824.00 25 25 25 75 31,824.00 25 25 25 75 31,824.00 25 25 25 75 31,824.00 300 424.32 127,296.00 32 44103105-hp-c50 Ink Cartridge, Hp L0s51aa (hp955), Cyan Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 982.80 0.00 33 44103105-hp-m50 Ink Cartridge, Hp L0s54aa (hp955), Magenta Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 982.80 0.00 34 44103105-hp-y50 Ink Cartridge, Hp L0s57aa (hp955), Yellow Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 982.80 0.00 35 44103105-hp-b50 Ink Cartridge, Hp L0s60aa (hp955), Black Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,294.80 0.00 36 44103105-hx-c48 Ink Cartridge, Hp L0s63aa (hp955xl), Cyan Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,339.52 0.00 37 44103105-hx-m48 Ink Cartridge, Hp L0s66aa (hp955xl), Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,339.52 0.00 38 44103105-hx-y48 Ink Cartridge, Hp L0s69aa (hp955xl), Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,339.52 0.00 39 44103105-hx-b48 Ink Cartridge, Hp L0s72aa (hp955xl), Black Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 1,817.92 0.00 40 44103105-hp-c51 Ink Cartridge, Hp T6l89aa (hp905), Cyan Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 468.00 0.00 41 44103105-hp-m51 Ink Cartridge, Hp T6l93aa (hp905), Magenta Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 468.00 0.00 42 44103105-hp-y51 Ink Cartridge, Hp T6l97aa (hp905), Yellow Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 468.00 0.00 43 44103105-hp-b51 Ink Cartridge, Hp T6m01aa (hp905), Black Original Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 774.80 0.00 44 44103112-ep-r05 Ribbon Cartridge, Epson C13s015516 (#8750), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 77.43 0.00 45 44103112-ep-r13 Ribbon Cartridge, Epson C13s015632, Black Cart 4 4 4 12 935.28 4 4 4 12 935.28 4 4 4 12 935.28 4 4 4 12 935.28 48 77.94 3,741.12 46 44103112-ep-r07 Ribbon Cartridge, Epson C13s015531 (s015086) Cart 1 1 1 3 2,455.44 1 1 1 3 2,455.44 1 1 1 3 2,455.44 1 1 1 3 2,455.44 12 818.48 9,821.76 47 44103103-br-b09 Toner Cartridge, Brother Tn-3320, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 3,567.20 0.00 48 44103103-br-b11 Toner Cartridge, Brother Tn-3350, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,002.40 0.00 49 44103103-br-b15 Toner Cartridge, Brother Tn-3478, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,575.44 0.00 50 44103103-br-b16 Toner Cartridge, Brother Tn-456 Black, High Yield Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,564.56 0.00 51 44103103-br-c03 Toner Cartridge, Brother Tn-456 Cyan, High Yield Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,716.80 0.00 52 44103103-br-m03 Toner Cartridge, Brother Tn-456 Magenta, High Yield Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,716.80 0.00 53 44103103-br-y03 Toner Cartridge, Brother Tn-456 Yellow, High Yield Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,716.80 0.00 54 44103103-ca-b00 Toner Cartridge, Canon Crg-324 Ii Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 13,399.36 0.00 55 44103103-hp-b12 Toner Cartridge, Hp Cb435a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 3,439.28 0.00 56 44103103-hp-b18 Toner Cartridge, Hp Ce255a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,705.36 0.00 57 44103103-hp-b21 Toner Cartridge, Hp Ce278a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,152.72 0.00 58 44103103-hp-b22 Toner Cartridge, Hp Ce285a (hp85a), Black Cart 10 10 0 20 71,968.00 10 10 0 20 71,968.00 10 10 0 20 71,968.00 10 10 0 20 71,968.00 80 3,598.40 287,872.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 59 44103103-hp-b23 Toner Cartridge, Hp Ce310a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,608.32 0.00 60 44103103-hp-c23 Toner Cartridge, Hp Ce311a, Cyan Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,897.44 0.00 61 44103103-hp-y23 Toner Cartridge, Hp Ce312a, Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,897.44 0.00 62 44103103-hp-m23 Toner Cartridge, Hp Ce313a, Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,897.44 0.00 63 44103103-hp-b28 Toner Cartridge, Hp Ce505a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,495.92 0.00 64 44103103-hp-b52 Toner Cartridge, Hp Cf217a (hp17a), Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 3,194.88 0.00 65 44103103-hp-b53 Toner Cartridge, Hp Cf226a (hp26a), Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,822.96 0.00 66 44103103-hp-b56 Toner Cartridge, Hp Cf281a (hp81a), Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 8,658.00 0.00 67 44103103-hp-b57 Toner Cartridge, Hp Cf283a (hp83a), Laserjet Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 3,367.52 0.00 68 44103103-hp-b58 Toner Cartridge, Hp Cf287a (hp87), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 10,908.56 0.00 69 44103103-hp-b60 Toner Cartridge, Hp Cf350a, Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,856.88 0.00 70 44103103-hp-c60 Toner Cartridge, Hp Cf351a, Cyan Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,943.20 0.00 71 44103103-hp-y60 Toner Cartridge, Hp Cf352a, Yellow Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,943.20 0.00 72 44103103-hp-m60 Toner Cartridge, Hp Cf353a, Magenta Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 2,943.20 0.00 73 44103103-hp-b61 Toner Cartridge, Hp Cf360a (hp508a), Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 7,803.12 0.00 74 44103103-hp-c61 Toner Cartridge, Hp Cf361a (hp508a), Cyan Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9,783.28 0.00 75 44103103-hp-y61 Toner Cartridge, Hp Cf362a (hp508a), Yellow Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9,783.28 0.00 76 44103103-hp-m61 Toner Cartridge, Hp Cf363a (hp508a), Magenta Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 9,783.28 0.00 77 44103103-hp-b62 Toner Cartridge, Hp Cf400a (hp201a), Black Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 3,439.28 0.00 78 44103103-hp-c62 Toner Cartridge, Hp Cf401a (hp201a), Cyan Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,063.28 0.00 79 44103103-hp-y62 Toner Cartridge, Hp Cf402a (hp201a), Yellow Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,063.28 0.00 80 44103103-hp-m62 Toner Cartridge, Hp Cf403a (hp201a), Magenta Laserjet Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,063.28 0.00 81 44103103-hp-b63 Toner Cartridge, Hp Cf410a (hp410a), Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,328.48 0.00 82 44103103-hp-c63 Toner Cartridge, Hp Cf411a (hp410a), Cyan Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,592.08 0.00 83 44103103-hp-y63 Toner Cartridge, Hp Cf412a (hp410a), Yellow Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,592.08 0.00 84 44103103-hp-m63 Toner Cartridge, Hp Cf413a (hp410a), Magenta Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 5,592.08 0.00 85 44103103-hp-b34 Toner Cartridge, Hp Q2612a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,155.84 0.00 86 44103103-hp-b48 Toner Cartridge, Hp Q7553a, Black Cart 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 4,680.00 0.00 Software 1 43231513-sft-001 Business Function Specific Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 2 43231602-sft-002 Finance Accounting And Enterprise Resource Planning Erp Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 3 43232004-sft-003 Computer Game Or Entertainment Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 4 43232107-sft-004 Content Authoring And Editing Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 5 43232202-sft-005 Content Management Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 6 43232304-sft-006 Data Management And Query Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 7 43232402-sft-007 Development Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 8 43232505-sft-008 Educational Or Reference Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 9 43232603-sft-009 Industry Specific Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 10 43233501-sft-016 Information Exchange Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 11 43232701-sft-010 Network Applications Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 12 43232802-sft-011 Network Management Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 13 43232905-sft-012 Networking Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 14 43233004-sft-013 Operating Environment Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 15 43233205-sft-014 Security And Protection Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 16 43233405-sft-015 Utility And Device Driver Software License 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 Part Ii. Other Items Not Available At Ps-dbm But Are Regularly Purchased From Other Sources (note: Please Indicate Price Of Items) 1 80141505-ts-001 Ballpen Piece 100 100 100 300 3,900.00 100 100 100 300 3,900.00 100 100 100 300 3,900.00 100 100 100 300 3,900.00 1200 13.00 15,600.00 2 80141505-ts-002 Multifunction Printer Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 3 80141505-ts-003 Laminating Film Pack 5 5 5 15 6,000.00 5 5 5 15 6,000.00 5 5 5 15 6,000.00 5 5 5 15 6,000.00 60 400.00 24,000.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 4 80141505-ts-004 Sticker Paper Pack 0 0 10 10 600.00 0 0 10 10 600.00 0 0 10 10 600.00 0 0 10 10 600.00 40 60.00 2,400.00 5 80141505-ts-005 Double Sided Tape Roll 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 6 80141505-ts-006 Photo Paper Pack 0 0 10 10 1,900.00 0 0 10 10 1,900.00 0 0 10 10 1,900.00 0 0 10 10 1,900.00 40 190.00 7,600.00 7 80141505-ts-007 Bleaching Solution Bottle 0 0 0 0 0.00 0 0 50 50 12,000.00 0 0 0 0 0.00 0 0 50 50 12,000.00 100 240.00 24,000.00 8 80141505-ts-008 Certificate Frame Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 9 80141505-ts-009 Certificate Holder Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 10 80141505-ts-010 Uninterruptible Power Supply Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 11 80141505-ts-011 Air Conditioning Unit Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 12 80141505-ts-012 Smart Television Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 13 80141505-ts-013 White Board Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 14 80141505-ts-014 Microphone Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 15 80141505-ts-015 Medal Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 16 80141505-ts-016 Dishwashing Liquid Bottle 10 10 10 30 9,900.00 10 10 10 30 9,900.00 10 10 10 30 9,900.00 10 10 10 30 9,900.00 120 330.00 39,600.00 17 80141505-ts-017 Plastic Fastener Box 10 10 10 30 1,410.00 10 10 10 30 1,410.00 10 10 10 30 1,410.00 10 10 10 30 1,410.00 120 47.00 5,640.00 18 80141505-ts-018 Steel Filing Cabinet Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 19 80141505-ts-019 Vellum Board Paper Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 20 80141505-ts-020 Extension Cord Piece 0 0 0 0 0.00 5 5 5 15 18,000.00 0 0 0 0 0.00 5 5 5 15 18,000.00 30 1,200.00 36,000.00 21 80141505-ts-021 Paint Gallon 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 22 80141505-ts-022 Colored Paper Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 23 80141505-ts-023 Bond Paper Ream 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 24 80141505-ts-024 Push Pin Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 25 80141505-ts-025 Door Mat Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 26 80141505-ts-026 Glue Stick (paste) Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 27 80141505-ts-027 Glue Stick (for Glue Gun) Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 28 80141505-ts-028 Deodorant Cake Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 29 80141505-ts-029 Disposable Gloves Box 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 30 80141505-ts-030 Office Chair Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 31 80141505-ts-031 Manila Paper Pack 0 0 10 10 800.00 0 0 0 0 0.00 0 0 10 10 800.00 0 0 0 0 0.00 20 80.00 1,600.00 32 80141505-ts-032 Automotive Batteries Piece 0 1 0 1 7,500.00 0 1 0 1 7,500.00 0 1 0 1 7,500.00 0 1 0 1 7,500.00 4 7,500.00 30,000.00 33 80141505-ts-033 Padlock Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 34 80141505-ts-034 Mobile Phone Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 35 80141505-ts-035 Compact Disc Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 36 80141505-ts-036 Amplifier Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 37 80141505-ts-037 Storage Box Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 38 80141505-ts-038 Plastic Envelope Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 39 80141505-ts-039 Document Scanner Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 40 80141505-ts-040 Water Dispenser Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 41 80141505-ts-041 Paracetamol Pack 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 42 80141505-ts-042 Glue Gun Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 43 80141505-ts-043 Inkjet Printer Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 44 80141505-ts-044 Speakers Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 45 80141505-ts-045 Povidone Iodine Bottle 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 46 80141505-ts-046 Keyboard Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 47 80141505-ts-047 Dslr Camera Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 48 80141505-ts-048 Steel Rack Set 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 49 80141505-ts-049 Laminating Machine Unit 0 0 1 1 5,000.00 0 0 0 0 0.00 0 0 1 1 5,000.00 0 0 0 0 0.00 2 5,000.00 10,000.00 50 80141505-ts-050 Fuel Filters Piece 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 51 80141505-ts-051 Airline Tickets (domestic) Ticket 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 52 80141505-ts-052 Airline Tickets (international) Ticket 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 Item & Specifications Unit Of Measure Monthly Quantity Requirement Total Quantity For The Year Price Total Amount For The Year Jan Feb Mar Q1 Q1 Amount April May June Q2 Q2 Amount July Aug Sept Q3 Q3 Amount Oct Nov Dec Q4 Q4 Amount 53 80141505-ts-053 Car (sedan Or Hatchback) Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 46 80141505-ts-054 Multi-purpose Vehicle (mpv) Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 47 80141505-ts-055 Sports Utility Vehicle (suv) Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 48 80141505-ts-056 Passenger Van Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 49 80141505-ts-057 Van Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 50 80141505-ts-058 Tri-wheel Vehicle Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 51 80141505-ts-059 Pick-up Truck Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 52 80141505-ts-060 All-terrain Vehicle (atv) Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 53 80141505-ts-061 Assembled Owner-type Jeep Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 50 80141505-ts-062 Assembled Passenger Jeepney-type Vehicle Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 51 80141505-ts-063 Motorcycle Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 52 80141505-ts-064 Bus Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 53 80141505-ts-065 Mini Bus Unit 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0 0 0 0.00 0 0.00 0.00 A. Total ₱ 2,576,442.32 B. Additional Provision For Inflation (10% Of Total) ₱ 257,644.23 C. Additional Provision For Transport And Freight Cost (if Applicable) ₱ - D. Grand Total (a + B+ C) ₱ 2,834,086.55 E. Approved Budget By The Agency Head In Figures And Words: We Hereby Warrant That The Total Amount Reflected In This Annual Procurement Plan To Procure The Listed Common-use Supplies, Materials, And Equipment Has Been Included In Or Is Within Our Approved Budget For The Year. Prepared By: Certified Funds Available / Certified Appropriate Funds Available: Approved By: Property/supply Officer Date Prepared: Accountant / Budget Officer Head Of Office/agency