Fabrication Tenders

Description: Annual Rc For Fabrication Under Block Patodi

Description: Annual Rc For Fabrication Under Sub Div Baitu

Description: P.l. No. 98090719 Condemned And Unserviceable Magnetic Stainless Steel Scrap Consisting Of Cuttings Of Plates / Sheets / Angles / Channels , Profile Cut Plates , Fabricated / Cut Up Parts Of Wagon Of Sorts And Sizes. Note:-1). Cssd / Goc Electronic Weigh Bridge To Be Used For Weighment. 2). Loading By Crane / Jcb Is Permitted.

Description: Fabricated Hand Brake Wheel (side Operated)

Description: * Cycling Kit - Bib Shorts Cycling Kit - Bib Shorts Cycling Kit - Race Fit Jersey Cycling Kit - Socks Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Cycling Kit - Race Fit Jersey * Cycling Kit - Socks Item 1: 8 X (size L) Bib Shorts (colour # Black) - Branding Included, See Instructions Below Item 2: 8 X (size L) Race Fit Jersey (colour # Olive) - Branding Logo Included, See Instructions Below Item 3: 8 X Pairs Of Socks (colour # Black) - Branding Logo Included, See Instructions Below *if Manuafacturer Does Not Have Stock Of A Particular Colour Referenced In The Specifications, Alternatives Should Be Proposed. A Colour Change Will Be Considered, But Not Style Change. Colour Change Will Have No Impact On Cost. Samples/ Specifications Will Be Requested. *see Technical Specifications Below Item 1: Men's Apex Jacquard Bib Shorts Colour: Black Size: Large Key Features: Apex Jacquard The Apex Jacquard Bib Shorts Are An Amalgamation Of Cutting-edge Materials And Ergonomic Design. These Shorts Incorporate A Pro-fit Leg Length, Ensuring A Sleek And Aerodynamic Fit. The New Pre-shaped Ergonomic Design Allows For Maximum Movement And Flexibility, Adapting Seamlessly To The Rider's Body.a Standout Feature Is The Use Of Ultra-megno Woven Lycra In The Main Body, A Durable And Robust Fabric Comprising 66% Polyamide And 34% Elastane. This Material Choice Guarantees Longevity And Maintains The Shorts' Shape And Compression Capabilities Over Time. The Italian-made Argon X7 Mk Ii Pad Insert Is A Critical Component, Offering Unparalleled Comfort And Support For Long Rides. This Highquality Insert Reduces Pressure Points And Absorbs Shock, Enhancing The Riding Experience.the Bibs Feature Breathable Open Knit Suspender Elastic, Which Increases Airflow And Prevents Overheating. The Integrated Gripper Elastic At The Leg Ensures The Shorts Stay In Place, Eliminating Any Distractions While Pedalling.the Advanced Moisture-wicking Mesh Incorporated Into The Design Effectively Draws Sweat Away From The Skin, Keeping The Rider Dry And Comfortable. Lastly, The Firm Graduated Compression Not Only Enhances The Fit But Also Boosts Blood Flow To The Muscles, Reducing Fatigue And Aiding In Performance Features - New Pre-shaped Ergonomic Design - French Ultra-megno Woven Lycra - Italian Made Argon X7 Mkii Pad Insert - Breathable Open Knit Suspender Elastic - Integrated Gripper Elastic At Leg - Advanced Moisture Wicking Mesh - Firm Graduated Compression Boosts Blood Flow To Muscles - Pro-fit Leg Length Fabrics Main Body: Main Body: Ultra-megno Woven Lycra - Durable - Maintains Shape - Advance Moisture Wicking Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Item 2: Men#s Pecora Merino Cycling Jersery: Colour: Olive Size: Large Key Features # Race Fit Jersey Made With Merino Wool-based Fabric The Pecora Race Fit Merino Jersey Brings The Astounding Properties Of This Natural Fabric To Your Cycling Wardrobe. Merino Wool Is Leading The Charge Of A New Wave In Cycling Apparel, And Offers Riders Natural Temperature Regulation, Anti-bacterial, Sun Protection And Much More. The Merino Fabric Means That The Jersey Naturally Prevents The Build Up Of Bacteria That Causes Odours, As Well As Offering A Natural 15+ Upf Rating To Keep You Safe From The Sun's Harmful Rays. However, The Greatest Property Are The Amazing Temperature Regulating Properties, Which Keep You Cool When It Is Hot And Warm When It Is Cold. This Makes The Jersey Ideal For A Wide Variety Of Conditions. Each Jersey Is Layered With State Of The Art Trims, Which Offer Reflective Properties For High Visibility In Low Light Conditions, An Elasticated Back Hem With Silicon Gripper Finish For A More Secure Fit; Three Reinforced Back Pockets; And A Full Length Ykk Zipper. Merino Fit This Product Is Designed As A Slim, Fitted Garment. If You Are On The Cusp, Please Purchase A Size Up. Features - Short Sleeve Race Fit - Ykk Coil Zip - Merino Sheep Sidewinder - Reflective Trims For Visibility - 3 Panel Back Pocket - Silicone Gripper Elastic At Back Hem - Mock Cuff Construction Fabrics Main Body: Merino Blend Fabric - Naturally Anti-bacterial - Natural Thermoregulating Properties - Sun Protection With A 30+ Upf Rating Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Item 3: Aero Cycling Socks Colour: Black Size: 8 To 12 Aero Cycling Socks Have A Two Part Construction Featuring A Form Fitting Aero Upper Sock And A Breathable Lower Layer For The Perfect Mix Of Comfort And Performance.these Are High Performance Socks With Two Distinct Fabrications On The Upper And Lower Sock To Offer Unmatched Breathability, Moisture Management And Aerodynamic Performance. The Sock Also Features Silicon Anti-slip Cuffs For A Secure Fit Features - Aero Form Fitting Upper Sock - Silicon Anti-slip Cuff - Highly Breathable Lower Sock Fabrics Upper Sock: Aerodynamic <(>&<)> Moisture Management Lower Sock: Breathable <(>&<)> Moisture Management Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Branding Instructions City Of Cape Town Will Provide The Art Work For The 6 Colour Logo To The Succesfull Bidder Placement Of The Artwork Item 1: Bib Shorts# Place City Logo On Left Front Leg Only (above The Cuff) Item 2: Race Fit Jersey # Place City Logoon Right Chest Only Item 3: Socks # Outer Side, Left And Right Sock Art Work/logo#s To Be Vinyl Printed. Contact Person: Jaco Esterhuizen Contact Number: 084 555 6595 Delivery Address: 5th Podium Block Ct Civic Centre

Description: Demin Cation Vessel Replacement the Fabrication, Supply And Installation Of Three Demin Cation Vessels With Engineering Design Assessments, Including The Supply And Installation Of Associated Control Instrumentation At Majuba Power Station, Water Treatment Plant For A Duration Of Up To Twenty-three (23) Months

Details: This Is A Sources Sought Notice (ssn)/request For Information (rfi) And Not A Solicitation Or An Indication That A Contractual Commitment Will Exist As A Result Of This Ssn. this Ssn Is In Support Of Market Research And Procurement Planning Being Conducted By The Management Support Office (mso) At The United States Department Of The Army (da), Assistant Secretary Of The Army (asa)/manpower And Reserve Affairs (m&ra)/deputy Chief Of Staff (dcs), G-1 Located At The Pentagon In Arlington, Virginia. This Announcement Is Not A Formal Request For Quotes (rfq). This Ssn/rfi Is For Informational And Planning Purposes Only And Does Not Guarantee That An Award Will Be Made. Any Quotes Submitted In Response To This Ssn/rfi Are Not Quotes On Which An Order Will Be Issued. The Government Assumes No Financial Responsibility For Any Costs Incurred. A Solicitation Package Is Not Available At This Time. However, Should Such A Requirement Materialize, No Basis For Claims Against The Da Shall Arise As A Result Of A Response To This Ssn/rfi Or Da’s Use Of Such Information Either As Part Of Our Evaluation Process Or In Developing Specifications Or Work Statements For Any Subsequent Requirement. location: Pentagon, 1400 Defense Pentagon Washington, Dc 20301-1400 objective: The Intent Of This Ssn/rfi Is To Gauge Industry Interest And Search For Potential Sources Capable Of Fulfilling A Requirement For The Design, Fabrication, Installation, And/or Repair Of Three (3) Wall Displays Throughout The E-ring Corridor Of The Pentagon Meeting The Technical Requirements In The Attached Document. The Ssn/rfi Also Intends To Determine Set-aside Possibilities For Qualified Small Businesses, Veteran-owned Small Businesses, Service-disabled Veteran-owned Small Businesses, Hubzone Small Businesses, Small-disadvantaged Businesses, And Women-owned Small Businesses. The Draft Minimum Technical Requirements For The Effort Are In The Attached Specifications. The Da Is Currently In The Planning Stages For This Procurement And May Continue To Modify The Language Within The Requirement, As Necessary. These Specifications Do Not Necessarily Represent The Final Specifications.

Details: The Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. background the National Institute Of Standards And Technology (nist), Gaithersburg 731.07 Group Within The Engineering Laboratory Is Seeking An Extreme Thermal Cycling Chamber To Perform Accelerated Aging Experiments As Part Of A Study Of Long-term Reliability Of Materials Used In Advanced Packaging Of Semiconductor Chips. This Work Is In Support Of The Chips Metrology Program. the Chips Metrology Program Develops And Advances Cutting Edge Metrology Capabilities For Members Of The Us Semiconductor Manufacturing Ecosystem. This Nist Conducted Research Program Works With Device Manufacturers, Tool Vendors, Materials Suppliers, And Other Organizations To Address Critical Metrology Gaps To Spur Innovation Within Seven Grand Challenge Areas. For More Information On Chips Metrology, Please Visit Https://www.nist.gov/chips/research-development-programs/metrology-program nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements: sample Types And Sizes samples Will Include Films, Multilayered Film Structures, And Sectioned Wafers materials To Be Aged Will Include Polymeric Components In Advanced Packaging, Including Underfill And Encapsulation Epoxies, Fiber Reinforced Polymer Substrates, Along With Thermal Interface Materials, Filler Components, Treated Substrates. These Materials May Be Standalone Films, Combined Into Multilayered Composites, Or Combined Into Assembled Semiconductor Structures As Part Of A Fabricated Test Vehicle. largest Sample Size Is Expected To Be A 300 Mm Wafer. thermal Cycling oven Must Provide A Wide Temperature Range Of At Least -100 °c To 200 °c. oven Must Also Provide Rapid Thermal Cycling With Thermal Ramp Rates Of At Least 70°c/min. Provide The Thermal Cycling Rate Along With Whether The Ramp Rate Can Be Controlled/modified. thermocouple Must Be Included. Provide The Number Of Thermocouples, Their Location, And The Temperature Accuracy Of The Oven. wire Port sample Degradation Will Be Monitored During Thermal Aging. This Will Require A Pass-through Port To Allow For Monitoring Cables To Be Fed Through The Oven. The Pass-through Port Must Be 2-3” In Diameter. Multiple Pass-through Ports Of Smaller Size Will Also Be Considered. Provide These Details. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number technical Specifications if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Recommended Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Said Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested In Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount, Or Rebate Arrangements For Recommended Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Calendar Days Prior To The Response Date. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). thank You For Taking The Time To Submit A Response To This Request!

Details: Title: Retrofit Déplacement Transversal Fabrication De Rails description: Les Installations De Déplacement Transversal De La Production De Rails Sont Vieillissantes Et Doivent Être Rénovées. En Particulier, Les Entraînements, Les Accouplements, Les Paliers Et Les Glissières, Y Compris Les Chaînes, Le Dispositif D'entraînement Et La Commande Doivent Être Remplacés Ou Nécessitent Un Refit. De Même, La Protection Du Capteur Contre Les Intempéries Doit Être Améliorée Et Le Déroulement Du Processus De La Commande Doit Être Amélioré. L'objet Et L'étendue De L'appel D'offres Sont La Fabrication D'installations De Déplacement Transversal Pour La Logistique De La Fabrication Des Rails Au Centre De Technique Ferroviaire De Hägendorf: 6 Pièces Commande Principale, 2 Pièces Option.

Details: Description:- Manufacturing And Supply Of Alumino Thermic Welding Portions Of 52kg/60 Kg/60ei- r260 As Approved By Rdso For Welding Of Rails 52kg/60kg/60ei-r260 Kg For 25mm Gap By The process Of At Welding Along With Complete Accessories Confirming To The Specification Laid Down In indian Railway Standard Specification No.irst-19-2020 Up To Date Correction Slips With Single Shot crucible Fitted With Automatic Tapping Thimble, 3 Pieces Pre Fabricated Mould (zircon Washed) manually Pressed Using Compressed Air Petrol/lpg Pre Heating For Execution Of Welding Of Rail Joint as Directed By The Engineer In Charge At Site. Note: 1. The Accessories Along With Welding Portion shall Be Supplied As Per Annexure-i Of The Irussor - 2021. 2. Rate Is Inclusive Of Transportation Of above To Sse/p.way Stores.