Fabrication Tenders

Description: Demin Cation Vessel Replacement the Fabrication, Supply And Installation Of Three Demin Cation Vessels With Engineering Design Assessments, Including The Supply And Installation Of Associated Control Instrumentation At Majuba Power Station, Water Treatment Plant For A Duration Of Up To Twenty Three (23) Months.

Description: Fabrication And Installation Of Solar Streetlights In Barangay Dalayap Santa Maria Pangasinan , Electrical Systems And Lighting Components ,sta. Maria Treasurer's Association

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00155 : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Upgrading/ Repair And Equipping Of Rural Health Units - Diffun Rural Health Unit 2 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱5,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00155: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Upgrading/ Repair And Equipping Of Rural Health Units - Diffun Rural Health Unit 2. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Upgrading/ Repair And Equipping Of Rural Health Units - Diffun Rural Health Unit 2 Contract Id No. : 24b00155 Location : Diffun, Quirino Brief Project Description : Expansion Of Existing Building (earthworks, Concrete Works, Steel Works, Masonry Works, Plastering Works, Installation Of Sewer Line, Coldwater Line), Existing Building (removal And Replacement Of Existing Roof And Ceiling Including Structural Trusses, Painting Of Replaced Ceiling, Installation Of Affected Lighting Fixtures), Installation Of Electrical Works For The Expansion Of Existing Building(conduits Boxes And Fittings With Wires And Wiring Devices, Panelboard With Main & Branch Breakers) Mechanical Works (installation Of Exhaust Fans For Expansion Of Expanded Area) Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Removal Of Structures And Obstruction • Structure Excavation (common Soil) • Embankment (from Structure Excavation & Borrow) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Sewer Line Works • Cold Water Lines • Ceiling • Frames • Fabricated Metal Roofing Accessory, 0.60 Mm, (ridge/hip Rolls, Flashing & Gutters) • Prepainted Metal Sheets (rib Type, Long Span,0.6mm Thk) • Cement Plaster Finish • Painting Works, (masonry/concrete, Steel) • Chb Non-load Bearing (including Reinforcing Steel) (100 Mm & 150mm) • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing, Steel Plates) • Structural Steel (trusses, Purlins) Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Lighting Fixtures Mechanical Works • Ventilating System Approved Budget For The Contract (abc) : ₱5,970,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 17 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 04 - 24, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On February 11, 2025, 11:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before February 24, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On February 24, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: February 04 - 10, 2025 Conspicuous Place (procurement Bulletin Board): February 04 - 10, 2025

Details: Description Notice To All Providers/suppliers: The Department Of Science And Technology, Caraga, Through Its Bac Intends Procure Supply And Delivery Of Customized Idea Mapping Road To Be Used For Conduct Of Ideation, Pitching And Design Thinking Activities With Partner Agencies And Universities In Caraga Region For The Innovation Hubs (ihubs) Project. Qty Unit Item Description Abc / Unit 5 Unit Customized Idea Mapping Board 10,000.00 50,000.00 - 10x4ft, With Steel Frame Base And With Caster Wheel - Fabricated Enamel Porcelain Boards - Flip Board - Designs: Business Model Canvas And Value Proposition Canvas ***see Attached Design As Such, The Provider Or Supplier Of Known Qualifications Is Hereby Invited To Submit Their Quotations/price Proposals Not Later Than 7 February 2025, 12:00 P.m. The Service Provider Must Submit The Following Requirements: 1. Mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located; And 2. Philgeps Registration Certificate/number; 3. Tax Clearance Certificate; And 4. Omnibus Sworn Statement. Please Submit Your Formal Proposal/bid Duly Signed By Your Representative Through Email, Supply@caraga.dost.gov.ph, Or Via Sealed Envelope Or The Option Of The Supplier, Attention To: Jennifer J. Dejarme Bac Chairperson Dost Caraga Csu Campus, Ampayon, Butuan City Note: Late And Unsigned Proposals/quotations Will Not Be Honored. A Proposal With An Incomplete Set Of Requirements Will Also Not Be Accepted.

Description: Provision Of Rubberized Panels For Heavy Traffic Level Crossings Including Pre- fabricated Foundation And Locking System At 17 Nos. Of Level Crossings (lc No. 9b, 10a, 15c, 20c, 22, 50, 54, 58, 91, 154-c, 195, 200, 201, 129-c, 135-c, 136-c, 116- c) Under Aden-rbl & Mbdp In The Jurisdiction Of Sr. Den-ii/lko.

Details: Description Invitation To Bid For Rehabilitation Of Multi-purpose Building At Cacawan, Pinamalayan, Oriental Mindoro / Rehabilitation Of Multi-purpose Building At Pili, Pinamalayan, Oriental Mindoro And Rehabilitation Of Multi-purpose Building At Sta. Rita, Pinamalayan, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The 20% Df 2025 Intends To Apply The Sum Of One Million Three Hundred Eleven Thousand Five Hundred Sixty Three Pesos And 88/100 (php 1,311,563.88) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “rehabilitation Of Multi-purpose Building At Cacawan, Pinamalayan, Oriental Mindoro/rehabilitation Of Multi-purpose Building At Pili, Pinamalayan, Oriental Mindoro And Rehabilitation Of Multi-purpose Building At Sta. Rita, Pinamalayan, Oriental Mindoro (ib No. Cw-2025-087)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 59 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Rehabilitation Of Multi-purpose Building At Cacawan, Pinamalayan, Oriental Mindoro Approved Budget For The Contract: Php 497,610.39 Item No. Description Qty/unit B.5 801(1) 903(2) 900(1)c1 1047(1) & 1047(10) 1014(1)b2 1013(2)a2 1032(1)c 1100(10), 1101(34 & 1103(2 Project Billboard/ Sign Board Removal Of Structures And Obstruction Formworks And Falseworks Structural Concrete, Class A, 28 Days Structural Steel & Metal Structure Accessories Pre - Painted Metal Sheets (above 0.472mm, Rib Type Long Span) Fabricated Metal Roofing Accessory Painting Works (steel) Repar/replacement Of Conduits, Boxes & Fittings (conduit Works/conduit Rough-in), Repar/replacement Of Wires & Wiring Devices, Lighting Fixtures & Lamps 1.00 1.00 5.76 6.39 1.00 135.00 24.12 110.80 1.00 Ea I.s. M2 M3 L.s. Sqm. Im. M2 I.s Rehabilitation Of Multi-purpose Building At Pili, Pinamalayan, Oriental Mindoro Approved Budget For The Contract: Php 314,316.58 Item No. Description Qty/unit B.5 903(1) 1046 (2) A1 1003(2)a1 1008(1)a Spl I 1047(1) & 1047(10) 1032(1)a 1032(1)b 1032(1)c 1007(2) Project Billboard/ Sign Board Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) & Plastering Wall (4.5mm Fiber Cement Board) On Metal Frame Aluminium Glass Window (sliding Type) Window Grills Structural Steel & Metal Structure Accessories Painting Works (masonry/concrete) Painting Works (wood) Painting Works (steel) Aluminium Framed Glass Door 1.00 1.00 2.55 20.33 14.55 1.00 1.00 223.44 69.09 19.58 1.00 Ea L.s. M2 Sqm. Sqm. I.s I.s. M2 M2 M2 I.s Rehabilitation Of Multi-purpose Building At Sta. Rita, Pinamalayan, Oriental Mindoro Approved Budget For The Contract: Php 499,636.91 Item No. Description Qty/unit B.5 101(1) 903(2) 1003(1)a1 1018(5) 1018(2) 1032(1)a 1013(2)a2 & 1013(2)b1 1014(1)b2 1047(2) 1100(11), 1101(34), 1103(2) & 1102(1) Project Billboard/ Sign Board Removal Of Sructures & Obstruction Formworks And Falseworks 4.5mm Fiber Cement Board Ceiling On Metal Frame Ceiling Glazed Tiles Unglazed Tiles Painting Works, Masonry/concrete Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel Repair/replacement Of Conduits/pipes, Boxes, Fittings (conduit Works/rough-in), Repair/replacement Of Wires And Wiring Devices Repair/replacement Of Lighting Fixtures And Lamps, Panel Board W/ Main & Branch Breaker 1.00 1.00 14.40 84.11 60.90 25.48 261.23 78.16 91.39 1.00 1.00 Ea I.s. M2 M2 M2 M2 M2 I.m M2 I.s. I.s 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 10, 2025 To February 24, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On February 10, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 24, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 24, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camimil, Calapan City, Oriental Mindoro (february 10, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson

Details: Design, manufacture, procurement, supply, fabrication, shop assembly, painting, shop testing, transportation & delivery to project site, receipt & storage at site, erection, testing & commissioning including packing & forwarding for shipment and trial operation of Horizontal Francis Turbine driven Generating units, Main Inlet Valves, Drainage & Dewatering system, Cooling Water system, SCADA/Controls of all Electro-Mechanical Equipments and other associated & auxiliary equipment for KARBI LANGPI MIDDLE II HYDRO POWER PROJECT (3 x 8 MW),West Karbi Anglong, Assam.

Description: BOQ ITEMS: Earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. Lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 Mtrs. in the area as directed by the Engineer all complete as per drawing specification and direction of the Engineer. , Earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the Engineer with selected spoil within a lead of 100 mtr., Disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 Km. and up to any lift includind cost of all labours and equipments. , Surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m., Supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer and including cost of centring and shuttering but excluding cost of cement., Supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the Engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. M20 RCC PCC, Taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 SWG annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of Engineer excluding cost of reinforcement. , Install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. , Supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. , Providing and fixing 125 into 63 mm M. S. Hinges of approved quality and make., Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 300 into 10 mm, Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 150 into10 mm, Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete., Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with IS 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete., Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm., Providing and fixing aluminium sliding door bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm, Cement concrete flooring 1 cement 2 coarse sand 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. Complete as per direction of EIC excluding cost of cement. 40 mm thick with 20 mm nominal size stone aggregate, Grading roof for water proofing treatment with Cement concrete 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size excluding cost of cement., 15mm thick minimum plastering with 1 cement 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying finishing curing and necessary scaffolding work complete as per drawings specifications with all materials and labours excluding cement Including Making grove if required. Work will be done upto 10 m height., Applying neat cement punning including cost of all materials labours etc. Complete as per direction of Engineer in charge excluding cost of cement, Supplying and applying two or more coats of white wash with lime to walls ceiling etc. At various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications ., Supplying and applying two or more coats of approved water proof cement paint over a coat of primer to exterior surfaces of concrete masonry plastered surfaces etc.at all elevations and including preparation of surface necessary scaffolding work etc.complete with all materials and labour Application of paint should be made as per manufacturer specifications to give an even shade. , Drain cleaning including disposal of rubbish up to 5 km all complete as per direction of EIC, Cleanning of chajja roof RWDC Floor corner drains etc., Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new or old work over a priming coat complete as per specification and direction of EIC. , Providing and fixing factory made ISI marked steel glazed doors windows and ventilator with beading and all members complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment., Taking delivery from store or departmental yard fabrication and erection of Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete., Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc.15 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc.25 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 100 mm dia nominal bore G.I.or CPVC.., Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore, Providing and fixing C.P. brass bib cock or Pillar Cock of approved quality conforming to IS 8931. 15 mm nominal bore., Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931. 15 mm nominal bore., Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of EIC, Demolishing R.C.C or PCC work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC, Dismantling G.I. pipes external work including excavation and refilling trenches after taking out the pipes manually by mechanical means including stacking of pipes within 50 metres lead as per direction of EIC upto 150 mm dia, Providing and fixing or Renewing glass panes with putty and nails wherever necessary including racking out the old putty Float glass panes of thickness 5.5 mm, Renewing of old glass putty, Supplying laying in position stone masonary with Hard rock boulder with cement morter 1 cement 6coarse sand morter finishing the top with PCC reasonably smooth complete with curing and raking of joints including cost of all material equipments and labour excluding cost of cement. , Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete., Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work one or more coats, Providing and fixing 35 mm thick factory made PVC door shutters with frame 65mm into 55mm with wall thickness 2 mm all complete as per manufacturers specification and direction of EIC. , Providing and fixing ISI marked flush door shutters conforming IS 2202 non decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked stainless steel butt hinges with necessary screws., Providing and fixing precoated galvanised iron profile sheets 0.50 mm total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC. The sheet shall be fixed using self drilling self tapping screws with EPDM seal complete upto any pitch in horizontal vertical or curved surfaces including ridges barge board etc excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. , Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Ridges plain 500 mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Barge board up to 300mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in Gutter. 600 mm over all girth, Providing reinforced by organic fibres or inorganic synthetic fibres cement 6 mm thick corrugated sheets roofing up to any pitch and fixing with polymer coated J or L hooks bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins rafters and trusses including cutting sheets to size and shape wherever required. , Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nuts G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete Close fitting adjustable ridges, Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nuts G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete in Barge boards , Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing bolts nuts 8mm dia. G.I plain bitumen washers complete but excluding the cost of purlins rafters trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum ultra violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pocketsThe sheets shall be opaque or translucent clear or pigmented textured or smooth as specified. 2 mm thick corrugated, Repairing and maitenance of Rolling shutter in all respect including greasing repairing replacement of material to repairing of rolling shutter. Supply and fixing 27.5 cm long springs, Supply and fixing ball bearing, Supply and fixing precast slab M20 grade, Providing wood work in frames of false ceiling or floor partitions etc. sawn and fixed in position Sal wood and 15 mm thick light weight integral densified micro look edged with PVC top matt false floor tiles of size 595 into 595 mm including cost of all materials labours and as per direction of EIC. , Aluminum work for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required Fittings shall be paid for separately Polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron, Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device handle leverconforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580 into 440 mm with integral type foot rests., Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 into 260 into 350 mm or 340 into 410 into 265 mm sizes respectively., Providing and fixing wash basin or Kitchen Sink with C.I. brackets 15 mm C.P. Brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630 into 450 mm with a single 15 mm C.P. brass pillar tap all complete as per direction of EIC., Providing and fixing white vitreous china water closet squatting pan Indian type Orissa pattern W.C. pan of size 580 into 440 mm, Supply and fixing PVC connecting pipe 15 mm N B, Supply and fixing PVC flexible waste pipe 32 or 40 mm N B, Supply and fixing float ball valve 20 mm N B, Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25 into 25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of EIC. , Dismantling steel work in built up sections in angles tees flats and channels including all gusset plates bolts nuts cutting rivets welding etc. including dismembering and stacking within 50 metres lead., Dismantling following roofing including ridges hips valleys and gutters etc.and stacking the material within 50 metres lead of G.S. Sheet, Dismantling following roofing including ridges hips valleys and gutters etc and stacking the material within 50 metres lead of Asbestos cement sheet

Details: 1. Manufacturing, Supply And Installation Of Loco Roof Stacker For Wag 9 Locomotives As Per Drg.no.b/trs/rlf/3/106 In Electrical Loco Shed, Vijayawada. (and) 2. Design, Supply, Fabrication And Erection Of Stacking Stands For 3-phase Equipment In Electrical Loco Shed, Vijayawada.

Description: Fabrication And Supply Of Aluminium Anodized Extruded Display Sections Self Colour Stictly As Per Drawing And Specifications At National Science Centre Delhi