Fabrication Tenders

Description: Lithuania – Miscellaneous Fabricated Products And Related Items – Santechnikos Prekių Ir Susijusių Gaminių Pirkimas

Details: Request For Information package Name: An/spn-50(v)1 Shipboard Air Traffic Radar psc Code: 5840 - Radar Equipment, Except Airborne naics Code: 334511 - Search, Detection, Navigation, Guidance, Aeronautical, And Nautical System And Instrument Manufacturing this Sources Sought/ Request For Information (rfi) Notice Is Being Posted In Accordance With (iaw) Dfars 206.302-1(d). Naval Air Warfare Center Aircraft Division (nawcad), Webster Outlying Field (wolf), Air Traffic Control And Landing Systems (atc&ls) Division Has A Requirement To Provide The Supplies And Services Associated With Procuring Parts And Providing Engineering And Technical Services For The Fabrication, Modification, Repair, Replacement, Upgrade, And Improvement Of The An/spn-50(v)1 Shipboard Air Traffic Radar Components, Assemblies And Associated Hardware. this Rfi Is Issued As Part Of A Procurement Strategy For The An/spn-50(v)1 Shipboard Air Traffic Radar. The Intent Is To Establish A Five (5) Year Basic Ordering Agreement (boa) In Support Of The An/spn-50(v)1. This Boa Is Intended To Procure Supplies And Engineering And Technical Services. the Naval Air Warfare Center Aircraft Division (nawcad) Webster Outlying Field (wolf) Air Traffic Control & Landing Systems (atc&ls) Division Located At St. Inigoes, Md Is Designated As The Design Agent, In-service Engineering Agent (isea), And Software Support Activity (ssa) For Air Traffic Control (atc) Systems. This Effort Is Composed Of Hardware And Engineering And Technical Services For The Fabrication, Modification, Repair, Replacement, Upgrade, And Improvement To An/spn-50(v)1 Shipboard Air Traffic Radar Components, Assemblies, And Associated Hardware. the Contractor Shall Furnish To The Government Any Support And Materials Required Through Written Orders Issued In Accordance With This Agreement. requested Information section 1 Of The Response Shall Provide Administrative Information And Shall Include The Following As A Minimum. organization Name, Mailing Address, Overnight Delivery Address (if Different From Mailing Address), Phone Number, Fax Number, And Name And E-mail Of Designated Point Of Contact. business Type (large Business, Small Business, Small Disadvantaged Business, 8(a)-certified Small Disadvantaged Business, Hub Zone Small Business, Woman-owned Small Business, Very Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned Small Business). section 2 Of The Response Shall Provide Technical Information, And Shall Include The Following As A Minimum. interested Parties Shall Respond With Existing Capabilities Or Products That Meet All Or A Subset Of The Aforementioned Attributes. Reponses That Include Information Detailing Potential Tradeoffs Or Alternative Solutions Is Encouraged. respondents Shall Include Product Specifications And Sketches With Submission. Product Specification And Sketches Are Not Included In The Final Page Count. if Applicable, Respondents Shall Include A List Of Department Of Defense (dod), Department Of Justice (doj) Or Department Of Homeland Security (dohs) Programs Of Record That Currently Employ Their Solution. Include A Sponsor Point Of Contact (poc) For Each Program, With Email Address And Phone Number. the Government Is Interested In Receiving Vendors’ Price Lists For Items They Believe Meet The Need In This Rfi. Supplying Price Data Does Not Imply A Contractual Obligation And Must Be Provided And Marked As Price Data. respondents Should Include A List Of Authorized Distributors. additional Information the Government Is Seeking Industry Input To Assist In Identifying Components That Might Meet The Requirements Described Above. Please Note That The Government Will Not Be Responsible For Any Costs Incurred By Interested Parties Responding To This Rfi. This Is A Request For Information Only. This Rfi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. in Response To This Rfi, Respondents Shall Submit Written Responses, Not-to-exceed Ten Pages In Length Via Electronic Mail. Respondents Should Include Product Specifications With Submission And Proof Of Certifications. Product Specification, Sketches, Or Listings Of Authorized Distributors Do Not To Count As Part Of The Page Count. The Government Is Interested In Receiving Vendors’ Price Lists For Items They Believe Meet The Need In This Rfi. Supplying Price Data Does Not Imply A Contractual Obligation And Must Be Provided As A Separate Document, Marked As Price Data. the Government Does Not Intend To Award A Contract On The Basis Of This Request Or To Otherwise Pay For The Information Solicited. All Information Received In Response To This Rfi Shall Be Safeguarded Adequately From Unauthorized Disclosure Iaw Far 15.207, Handling Proposals And Information. The Government Utilizes Contractor Support Staff (css) For Assisting In All Aspects Of Its Acquisition Process, And Each Of Those Individuals Does Have Signed Non-disclosure Statements On File As Condition Of Their Employment. All Information Received In Response To This Rfi That Is Marked Proprietary Will Be Handled Accordingly. The Government Will Not Be Liable For Or Suffer Any Consequential Damages For Any Proprietary Information Not Properly Identified. Proprietary Information Will Be Safeguarded Iaw The Applicable Government Regulations. Responses To This Rfi Will Not Be Returned. Respondents Will Not Be Notified Of The Result Of The Review. failure To Respond To This Rfi Does Not Preclude Participation In Any Future Associated Solicitation That May Be Issued. Information Provided In No Way Binds The Government To Solicit Or Award A Contract. If A Solicitation Is Released, It Will Be Synopsized On The System For Award Management Website: Sam.gov. It Is The Potential Vendor’s Responsibility To Monitor This Site For The Release Of Any Follow-on Information. how To Respond interested Parties Shall Respond Within Six Days After Release Of This Rfi With Product Information That Meets All Or A Subset Of The Aforementioned Attributes. Please Submit Your Response To This Rfi (not To Exceed Ten (10) Pages) Via E-mail No Later Than 21 October 2024 To Lauren Clemmens At Lauren.a.clemmens.civ@us.navy.mil.

Description: Empanelment Of Fabrication Agency For Topside Fabrication Of Well Head Platforms For Western Offshore Projects

Details: Nasa/goddard Space Flight Center (gsfc) Has A Requirement For Flight Dynamics Support Services (fdss Iii) That Provides Flight Dynamics Support Services To, And Related Service Support For, The Engineering And Technology Directorate’s Mission And Systems Analysis Division Throughout Gsfc As Required, For The Study, Design, Development, Fabrication, Integration, Testing, Verification And Operations Of Spaceflight, Airborne And Ground System Hardware And Software, Including Development And Validation Of New Technologies To Enable Future Space And Science Missions. nasa/gsfc Intends To Issue A Sole Source Contract To Acquire The Services From Opr, Llc. Nasa/gsfc Intends To Extend The Current Contracts Effective Ordering Period By An Additional Six (6) Months. The Extension Will Allow For Continued Performance And Continuation Of Mission Critical Services Under The Fdss Iii Contract Through October 31, 2025 For Six (6) Months, By Which Time The Follow-on, Competitive Contract Is Expected To Be Awarded. This Is A Cost-plus-fixed-fee (cfpp), Single-award Indefinite Delivery Indefinite Quantity (idiq) Contract, 80gsfc19c0072. The Rationale Supporting This Sole Source Award To Opr, Llc Is In Accordance With 10 U.s.c 3204(a)(1), As Implemented By Far 6.302-1 “only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements.” the Government Does Not Intend To Acquire A Commercial Item Using Far Part 12. interested Organizations May Submit Their Capabilities And Qualifications To Perform The Effort Electronically Via Email To Jacob Perez, Jacob.a.perez@nasa.gov Not Later Than 4:30pm Est On October 21, 2024. Such Capabilities/qualifications Will Be Evaluated Solely For The Purpose Of Determining Whether Or Not To Conduct This Acquisition On A Competitive Basis. A Determination By The Government Not To Compete This Acquisition On A Full And Open Competition Basis, Based Upon Responses To This Notice, Is Solely Within The Discretion Of The Government. nasa Clause 1852.215-84, Ombudsman, Is Applicable. The Center Ombudsman For This Acquisition Can Be Found At : Https://www.hq.nasa.gov/office/procurement/regs/procurement-ombuds-comp-advocate-listing.pdf

Description: CATEGORY: Fabricated Item Kit Of Hull Group (412ZZB6553)

Details: Manufacturing Demonstration Facility Technology Collaborations For Us Manufacturers In Advanced Manufacturing And Materials Technologies oak Ridge National Laboratory (ornl) Is Seeking Industry Partners To Participate In Short-term, Collaborative Projects Within The Manufacturing Demonstration Facility (mdf) To Accelerate Development Of New Energy Efficient Manufacturing Technologies. This Opportunity Will Provide Selected Participants Access To Ornl's Experienced Staff And Unique Equipment And Capabilities To Demonstrate Advanced Concepts With Intent To Develop And Deploy New Manufacturing Processes Or Materials In U.s. Manufacturing Industries. description ut-battelle, Llc, Acting Under Its Prime Contract No. De-ac05-00or22725 With The U.s. Department Of Energy (doe) For The Management And Operation Of The Oak Ridge National Laboratory, Conducts Research And Development In Support Of The Doe Advanced Manufacturing Office (amo). The Doe Advanced Manufacturing Office Partners With Industry, Small Business, Universities, And Other Stakeholders To Identify And Invest In Emerging Technologies With The Potential To Create High-quality Domestic Manufacturing Jobs And Enhance The Global Competitiveness Of The United States. ornl Is Requesting Cost-shared Proposals From Industry To Assess Applicability Of New Technologies That Can Reduce Manufacturing Energy Intensity Or Produce New, Energy-efficient Products. As Part Of The Technology Collaborations Conducted Under This Announcement, The Proposer Will Describe The Potential Manufacturing And Life Cycle Energy Savings That May Be Realized By The Targeted Project. Projects That Focus On Advanced Manufacturing And Materials Technologies For Commercial Applications Related To Additive Manufacturing Or Carbon Fiber And Composites Are Preferred. projects Will Be Conducted During A Short-time Period. At Least 50% Cost Share, Which Can Be Funds-in To Ornl Or In-kind Contributions (e.g., Facilities, Services, And Staff Time), Is Required On The Part Of The Industrial Participant. Participant Cost-share Cannot Be Met Using Funds From U.s. Government Sources. Funds Will Not Be Provided To The Industrial Participant By Ornl. Note: This Is Not A Procurement Request. eligibility eligibility Is Limited To Industries That Currently Manufacture Or Process Materials In The U.s. For Commercial Applications, Or To Industries That Will Be Able To Do So As A Direct Result Of These Collaborative Efforts. There Is No Restriction Based On A Particular Material System Or Manufacturing Process; However Projects Should Address Advanced Manufacturing And Materials Technologies In Additive Manufacturing Or Carbon Fiber And Composites. background doe's Manufacturing Demonstration Facility (mdf) At Ornl Offers Distinctive World-leading Capabilities In Manufacturing And Materials Research Technologies And Characterization Facilities. The Mdf Provides A Collaborative, Shared Infrastructure To Help Industry Adopt Energy Efficient, Rapid, And Flexible Manufacturing Technologies To Lower Production Cost, And Create New Products And Opportunities For High-paying Jobs. Ornl's Expertise In Material Synthesis, Characterization, And Process Technology Will Assist Manufacturing Industries In Conducting Assessments Of New Fabrication Concepts And Methods For Improving Existing Technologies. The Materials And Processing Technologies Developed Are Expected To Be Deployed In New Or Existing Manufacturing Facilities. More Information About The Ornl Mdf Can Be Found At: Http://web.ornl.gov/sci/manufacturing/ from Concept To Commercialization, Ornl's World-leading Facilities And Expertise Enable Research Focused On Reducing The Energy Intensity Of U.s. Industry, Supporting Development Of New Products, And Strengthening Our Nation's Clean Energy Economy To Meet The Commercial And National Security Needs Of Tomorrow. objective the Objective Of These Mdf Technology Collaborations Is To Collaborate With Industry To Investigate, Improve, And Scale Process Methodology To Reduce The Risk And Accelerate The Development And Deployment Of Innovative Energy Efficient Manufacturing And Materials Technologies. Creation And Preservation Of Domestic Manufacturing Jobs Is A primary Goal Of This Solicitation. the Primary Focus Of This Announcement Is To Target Projects That Will Impact The Technical Areas Of additive Manufacturing Utilizing A Broad Range Of Direct Manufacturing Technologies For Metal And Polymer Feedstocks Using A Variety Of Both Established And Innovative Deposition Systems And Technologies. carbon Fiber And Composites Utilizing A Broad Range Of Carbon Fiber Synthesis, Characterization, And Compositing Technologies From Precursor Evaluation Through Carbon Fiber Pilot Scale Production (25 Metric Tons/year) For Low Cost, Lightweight, And Higher-performance Composite Products Incorporating Carbon Fibers And Other Material Reinforcements. in Addition To The Above Mentioned High Priority Technology Categories, Projects With Sufficient Merit May Be Approved In The Following Areas: lightweight Metals Processing Using Advanced Synthesis And Processing Technologies For Low-cost Titanium Alloys, Magnesium Alloys, And Metal Matrix Composite Products roll-to-roll Processing Using Pulse Thermal Processing And Other Advanced Processing Technologies To Develop Low-cost Manufacturing Of Flexible Electronics, Photovoltaics, Energy Storage Systems, And Other Products battery Manufacturing Innovative Processing Using Ornl's Unique Prototyping Materials And Evaluation Facilities laboratory Support it Is Anticipated That Industrial Partners Will Work Collaboratively With Members Of The Mdf Staff To Conduct Project Activities Across The Various Areas Of Expertise Within The Mdf. intellectual Property And Proprietary Data projects With The Potential For The Generation Of Intellectual Property Will Be Performed With A Cooperative Research And Development Agreement (crada) As The Contract Instrument. See The Announcement Package For A Sample Crada Agreement. Doe And Ornl Respect The Importance Of Industry's Intellectual Property And Data Security While Balancing The Need To Document The Benefits Of Public Expenditures. Provisions Relating To Proprietary Information And Intellectual Property Are Set Forth In The Crada. A Non-disclosure Agreement (nda), If Required, Can Be Put Into Place During Development Of The Project To Facilitate Discussions While Protecting The Partner's Proprietary Information. it Is Preferred That Proprietary Information Not Be Included In The Proposal. If Company Proprietary Information Is Included In The Proposal, The Specific Information Should Be Marked As Such, And Ut-battelle/ornl Will Treat That Information As Business Confidential. proposal Guidelines proposals Should Be Completed Using The Attached Template In The Announcement Package proposers Are Encouraged To Consult With Ornl Technical Staff To Develop A Work Scope That Is Technically Feasible And Compatible With Ornl Facilities And Capabilitie  proposal Deadline And Submission this Solicitation Will Remain Open Subject To Availability Of Funding From The Doe Advanced Manufacturing Office. completed Proposals May Be Submitted In Pdf File Format By Email To Mdfcollaboration@ornl.gov. The Subject Line Should Include: Ornl Mdf Technology Collaborations And The Name Of The Proposer. proposal Evaluation And Timeline this Is An Open Announcement. Selection Of Winning Proposals Will Be At The Discretion Of The Doe Amo. Proposal Evaluation Criteria Will Include Compatibility With Ornl Facilities And Capabilities, Technical Feasibility And Merit, The Potential To Commercialize New Products And Create Us Jobs, And The Potential For Industrial Energy Savings. Amo And The Mdf Reserve The Right To Select All, A Portion, Or None Of The Submissions.

Description: Synopsis For Fabrication Of Quantity 100 Aluminum 120-millimeter (mm) Sabots

Description: Design, Fabrication & Installation Of Full Scale Replica Ps. Comet Replica Boat

Description: Design, Fabrication & Installation Of Full Scale Replica Ps. Comet Replica Boat

Description: Design, Fabrication & Installation Of Full Scale Replica Ps. Comet Replica Boat