Electrical Tenders

Details: Acquisition of Installation Services of Equipment Required for Energy Accounting, in order to Enable Ab Vilnius Heat Networks to Ensure Remote Reading of the Heat Energy Accounting It Produces. The Dynamic Purchasing System (hereinafter - DPS) is divided into the following categories: Category I - Hot Water Meter Installation Services; Category Ii - Domestic Heat Meter Installation Services; Category Iii - Installation Services of Electrical and Electronic Equipment of Heat Points; Category Iv - Installation Services of Introductory Heat Meters; Category V – Installation Services of Heat Dividers; Vi Category - Concentrator Installation Services.

Details: Description Invitation To Bid For The Procurement Of Supply And Delivery Of Various Machinery (by Lot) 1. The Department Of Agriculture-western Visayas, Through The National Expenditure Program 2025 (early Procurement Short Of Award) Intends To Apply The Sum Of Forty Three Million Five Hundred Ninety Five Thousand Pesos (php43,595,000.00) Being The Abc To Payments Under The Contract For Procurement Of Supply And Delivery Of Various Machinery (by Lot)/ib No. 2025-005 (amv). Description Abc Lot 1 ₱1,500,000.00 Lot 2 ₱1,600,000.00 Lot 3 ₱1,650,000.00 Lot 4 ₱1,485,000.00 Lot 5 ₱6,000,000.00 Lot 6 ₱1,250,000.00 Lot 7 ₱4,320,000.00 Lot 8 ₱14,000,000.00 Lot 9 ₱1,890,000.00 Lot 10 ₱4,500,000.00 Lot 11 ₱3,900,000.00 Lot 12 ₱1,500,000.00 Total ₱43,595,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-western Visayas Now Invites Bids For The Procurement Of Supply And Delivery Of Various Machinery (by Lot) With The Following Specifications: Lot 1 – 10 Units Hand Tractor • Brand New • Axle: Hexagonal Or Circular Plowing Capacity, Single Pass 1.0 Ha/day (minimum) Provision Of Earmuffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirements With Set Of Manufacturer’s Standard Tools Required For Maintenance Shall Conform To Pns/pabes 345:2022, Walking-type Agriculture Tractor (pull-type) • Prime Mover: Brand New 7.0 Hp (minimum), Water-cooled/air/cooled, Diesel/gasoline Engine, Direct-injection, Single-cylinder, Four-stroke Cycle Shall Conform To Paes 116:2001, Small Engine • With Implements One (1) Unit Each: Disc Plow (2 Disc), Minimum Comb Harrow Moldboard-type Side Plow Leveler • With Cage Wheel And Brand New Pneumatic Tires • With Trailer One (1) Ton Capacity With Leaf Spring/coil Spring Suspension And Brand New Tires • Additional Requirements:  With Amtec Test Results For Hand Tractor And Engine  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 2 – 10 Units Floating Tiller • Brand New Width Of Rotary Tilling Wheel: 1.0 M (min.) Provision Of Ear Muffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement Shall Conform To Paes 347:2022, Waking-type Agricultural Tractor- Specifications, Part 3: Float-assisted Tiller With Set Of Manufacturer’s Standard Tools Required For Maintenance • Engine (prime Mover): 9.0 Hp (min.) Air-cooled Gasoline/diesel Engine Shall Conform To Paes 116:2001, Small Engine • Additional Requirements:  With Amtec Test Results For Floating Tiller And Engine  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Unit And The Engine Offered Lot 3 4 Units Brand New Rice Thresher With Sifter And Fan Or Shaker 7 Units Brand New Rice Thresher Without Sifter And Fan • Performance/classification: Thrown-in, Axial Flow Type Threshing Cylinder: Type: Open Cylinder Peg Tooth Round/knife Bar Mild Steel Output Capacity: 1 Ton/h (minimum) Shall Conform To Paes 204:2015, Mechanical Rice Thresher With Set Of Manufacturer’s Standard Tools Required For Maintenance Provision Of Ear Muffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement • Engine (prime Mover): Brand New 8 Hp, Minimum Air-cooled/water-cooled Gasoline Or Diesel Engine Shall Conform To Paes 116:2001, Small Engine • Additional Requirements:  With Amtec Test Results For Thresher And Engine  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 4 – 9 Units Rice Reaper • Brand New • Prime Mover: 2.61 Kw (3.5 Ho), Minimum Gasoline Engine • Field Capacity: 2.0 Ha/day (minimum) • Performance/classification/other Features/accessories: Width Of Cut: 1.0, Minimum Adjustable Cutting Height Transmission System Must Be Directly Coupled To The Engine Gear Transmission With Gear Box Preferably With Safety Features Shall Conform To Paes 212:2015, Rice Reaper • Additional Parts: With Cage Wheel With Brand New Pneumatic Tires (2 Units) • Additional Requirements:  With Complete Basic Tools And Accessories As Indicated In Paes  With Brochure  With Original Equipment Manufacturer Manual (oem) To Be Submitted During Delivery  With Amtec Test Result  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto) Lot 5 – 12 Units Corn Mill • Brand New Compact Type Input Capacity: 100kg/h (minimum) Provision Of Ear Muffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement Shall Conform To Paes 251:2021, Corn Mill With Set Of Manufacturer’s Standard Tools Required For Maintenance With Steel Ladder Minimum Of 3 Steps • Engine (prime Mover): Brand New 9 Hp (minimum) Air-cooled/water-cooled Gasoline/diesel Engine Or 3 Hp (minimum) Electric Motor, Single Phase Shall Conform To Paes 116:2001, Small Engine • Additional Requirements:  With Amtec Test Result For Corn Mill And Electric Motor Or Engine And Engine  With Instruction/operations Manual For Both Corn Mill And Enine (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 6 – 5 Units Hammer Mill • Brand New • Input Capacity: 100kg/h (minimum) Type: Swinging Type Or Fic Hammer With Set Of Screens • Shall Conform To Paes 216:2004, Hammer Mill • Provision Of Ear Muffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement • With Complete Basic Tools And Accessories As Indicated In Paes • With Steel Ladder Minimum Of 3 Steps • Engine (prime Mover): Brand New 7 Hp, Minimum Air-cooled/water-cooled Gasoline Or Diesel Engine Shall Conform To Paed 116:2001, Small Engine • Additional Requirements:  With Amtec Test Results For Hammer Mill And Engine  With Brochure  With Instruction/operations Manual For Both Hammer Mill And Engine (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 7 – 16 Units Corn Sheller • Brand New Output Capacity: 2.0 Tons/h (minimum) Provision Of Ear Muffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement Shall Conform To Paes 208:2000, Power-operated Corn Sheller With Brand New Pneumatic Tires With Set Of Manufacturer’s Standard Tools Required For Maintenance With Steel Ladder Minimum Of 3 Steps • Engine (prime Mover): Brand New 7 Hp, Minimum Air-cooled/water-cooled Gasoline Or Diesel Engine Shall Conform To Paes 116:2001, Small Engine • Additional Requirements:  With Amtec Test Results For Corn Sheller And Engine  With Brochure  With Instruction/operations Manual For Both Hammer Mill And Engine (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 8 – 4 Units Re-circulating Dryer • Brand New • Type: Batch Type, Recirculating Stationary • With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried • Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material • Power Requirements: Single-phase Electrical Connection, Maximum 5kw Rated Power Of All Electric Motors • Holding Capacity: 6 Tons, Minimum • With Provision Of Built-in Moisture Meter • With Provision Of Safety Features • With Pre-cleaner Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor • With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet • With Set Of Manufacturer’s Standard Tools Required For Maintenance • Shall Conform To Performance Requirement Paes 201:2015, Heated-air Mechanical Grain Dryer • Heating System Requirement: Heating System 1 (petroleum Based Fuel)  Petroleum Based Fuel: Direct-fired  With The Following Components And Accessories - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive Ad Heat-resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System Heating System 2 (biomass Fuel)  Biomass Fuel: Indirect-fired  With The Following Components And Accessories: - With Heat Exchanger - Burning Chamber: Made Of Refractory Bricks Or Steel - Automatic Fuel Feeder: Auger/screw Type - Temperature Control - Compatible Electric Motor For The Heating System - Fuel Can Be Rice Hull Or Corn - With Dust Collection System • Accessories: Brand New Moisture Meter (digital Capacitance Type) Ash Box/cart Generator Set - Rated Power: 15kva, Minimum - Voltage Requirement Compatible To The System - Power Supply/generation System Should Be Brand New And Not Refurbished - Provided With Mechanical Transfer Switch (mts) - All Electrical Wires, Accessories, Piping To The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided - With Thermal, Insulation And Noise Suppressor - Noise Level; 92 Dba Maximum, If Exceeded Earmuffs Shall Be Provided - With Protection Or Cover Against Rat Entry (as Per Manufacturers Specification) Air Compressor For Cleaning, Heavy Duty At Least 120 Psi, 5m Air Hose One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum Automatic Portable Bag/sack Closer/sewer With Portable, Heavy Duty Weighing Scale, Minimum 150 Kg Weighing Capacity With Collapsible Cover (trapal), Thickness: S200 With Bagging Bin, Capacity Appropriate To The System • Additional Requirements:  With Amtec Test Result (coupled System) (testing Material – Rice Or Corn)  With Brochure  With Original Equipment Manufacturer Manual (oem) To Be Submitted During Delivery  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter) For The Prescribed Part Od The Dryer And Generator Set  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) Lot 9 – 7 Unit Multi-cultivator • Brand New • Transmission: Gear Type • Powered By 9 Hp (minimum) Gasoline Engine • With Implements And Accessories: Steel Wheel Steel Blades For Trench Cutting, Row Forming, Ditch Digging • Dry Weight: 165kg (minimum) • Shall Conform For Paes 147:2010, Field Cultivator • With Set Of Manufacturer’s Standard Tools Required For Maintenance • Additional Requirements:  With Amtec Test Result  With Brochure  With Instruction/operations Manual (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas – Amia Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) Lot 10 – 2 Units Village Type Feed Mill • Brand New  Components: A. Fabrication Of One (1) Unit Horizontal Mixer  Mixing Rate: 800 Kg/h (minimum)  Prime Mover: 3hp (min.) Single Phase Electric Motor B. Fabrication Of One (1) Unit Hammer Mill (swinging Type)  Prime Mover: 12hp (min.) Gasoline/diesel Engine, Water-cooled/air-cooled  Capacity: 600 Kg/h (min.) C. Fabrication Of One (1) Unit Micro-mixer  Mixing Rate: 200 Kg/h (min.)  Prime Mover: 2hp (min.), Single Phase, Electric Motor  Made Of Stainless Casing D. Weighing Scale  Capacity: 1000 Kg (min.)  Platform Type E. Sack Sewing Machine  Portable Type  Single Thread Chain Stitch F. With Set Of Manufacturer’s Standard Tools Required For Maintenance • Additional Requirements:  With Amtec Test Result  With Instruction/operations Manual (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto) Lot 11 – 13 Units Forage Chopper • Brand New  Input Capacity: 300 Kg/h (minimum)  Length Of Cut: 10mm – 50mm  Discharge Mechanism: Throw-away Type  Feeding Mechanism: Semi-precision Cut  Mobility: With Wheels  Shall Conform To Paes 218:2004, Forage Chopper  With Set Of Manufacturer’s Standard Tools Required For Maintenance  Provision Of Earmuffs Or Any Ear Protective Device Is Mandated When The Noise Level Exceeds The Minimum Requirement • Engine (prime Mover):  Brand New  8 Hp (min.), Water-cooled/air-cooled, Diesel/gasoline Engine, Direct-injection, Single-cylinder, Four-stroke Cycle  Shall Conform To Paes 116:2001, Small Engine • Additional Requirements:  With Amtec Test Result  With Instruction/operations Manual (to Be Submitted Upon Delivery)  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto)  Must Have A Valid Certificate Of Conformity (cc) For The Engine Offered Lot 12 – 1 Unit Baler • Brand New  Capacity: 70 Bale/h, Minimum  Bale Shape: Square  Bale Output Dimension (lxwxh) Mm: 750x450x350, Minimum  Source Of Power: Tractor Pto  Tractor Power Required: 40-55hp • Additional Requirements:  With Amtec Test Result  With Brochure  With Original Equipment Manufacturer Manual (oem) To Be Submitted During Delivery  Warranty Period: 1 Year From The Date Of Acceptance Of The Recipient/beneficiary  With Reflectorized Da Western Visayas Logo (minimum Of 6” Diameter)  Service Center Must Conform To Paes 138:2004 And Should Have An Available Spare Parts And Technician Within Region 6  Must Have A Valid Certificate Of Accreditation From National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Board.  Must Have A Valid Permit To Operate (pto) Delivery Of The Goods Is Required Within 45 Calendar Days From Receipt Of Notice To Proceed And To Be Delivered At The Attached Drop Off Points. Bidders Should Have Completed, Within Three (3) Years (2021-present) From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. The Prospective Bidder Must Be Registered In The Philgeps. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture - Visayas And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 30, 2024 – January 21, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amount: Lot Cost Of Bidding Documents Lot 1 ₱5,000.00 Lot 2 ₱5,000.00 Lot 3 ₱5,000.00 Lot 4 ₱5,000.00 Lot 5 ₱10,000.00 Lot 6 ₱5,000.00 Lot 7 ₱5,000.00 Lot 8 ₱25,000.00 Lot 9 ₱5,000.00 Lot 10 ₱5,000.00 Lot 11 ₱5,000.00 Lot 12 ₱5,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Agriculture-western Visayas Will Hold A Pre-bid Conference At 9:30 A.m. On January 7, 2025 At The Rcpc Library, Rcpc Building, Da Wesviarc Compound, Brgy. Buntatala, Jaro, Iloilo City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 9:30 A.m. On January 21, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In The Amount Of Any Of The Acceptable Forms And In The Amount: Lot Abc Bid Security Form Of Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit (2%) Form Of Surety Bond (5%) Lot 1 ₱1,500,000.00 ₱30,000.00 ₱75,000.00 Lot 2 ₱1,600,000.00 ₱32,000.00 ₱80,000.00 Lot 3 ₱1,650,000.00 ₱33,000.00 ₱82,500.00 Lot 4 ₱1,485,000.00 ₱29,700.00 ₱74,250.00 Lot 5 ₱6,000,000.00 ₱120,000.00 ₱300,000.00 Lot 6 ₱1,250,000.00 ₱25,000.00 ₱62,500.00 Lot 7 ₱4,320,000.00 ₱86,400.00 ₱216,000.00 Lot 8 ₱14,000,000.00 ₱280,000.00 ₱700,000.00 Lot 9 ₱1,890,000.00 ₱37,800.00 ₱94,500.00 Lot 10 ₱4,500,000.00 ₱90,000.00 ₱225,000.00 Lot 11 ₱3,900,000.00 ₱78,000.00 ₱195,000.00 Lot 12 ₱1,500,000.00 ₱30,000.00 ₱75,000.00 In Lieu Of A Bid Security, The Bidder May Submit A Duly Notarized Bid Securing Declaration That Is An Undertaking Which States, Among Others, That The Bidder Shall Enter Into Contract With The Procuring Entity And Furnish The Required Performance Security Within 10 Calendar Days From Receipt Of The Notice Of Award, And Committing To Pay The Corresponding Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event That It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. 9. Bid Opening Shall Be At 9:30 A.m. On January 21, 2025 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture-western Visayas Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. The Department Of Agriculture-western Visayas Does Not Condone Any Forms Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 12. For Further Information, Please Refer To: Zarlina B. Cuello Bac Chairperson Da-wesviarc Compound Brgy. Buntatala, Jaro, Iloilo City Tel. No. (033) 320-23-73 Www.westernvisayas.da.gov.ph Procurement@wv.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps December 30, 2024 Zarlina B. Cuello Bac Chairperson

Details: Navy Reentry Systems Technical Engineering Services (non-da/pa) synopsis this Is A Sources Sought Notice (ssn) Announcement. Ssns Are Issued To Assist The Agency In Performing Market Research To Determine Industry Interest And Capability. No Proposals Are Being Requested Or Accepted With This Synopsis. This Is Not A Solicitation For Proposals And No Contract Shall Be Awarded From This Synopsis. Therefore, No Proposals Are Being Requested Or Accepted In Response To This Ssn. 5.0 Purpose in Accordance With (iaw) Federal Acquisition Regulation (far) Part 10, Ssp Is Conducting Market Research To Determine If Sources Are Capable Of Successfully Performing The Requirements Identified In This Ssn. Specifically, Ssp Is Seeking Capable Firms For Engineering And Technical Services With An Emphasis On Navy Reentry Bodies (rb) Vulnerability And Performance, Systems Analysis And Effectiveness, Nuclear Weapons Surety And System Safety, Radiological Health And Radiation Control, And Future Navy Program Development As Cited In Paragraph 8.0 Below. the Contract Type Will Include Cost Plus Fixed Fee, Level Of Effort, Term Contract Line Item Numbers (clins). The Period Of Performance (pop) Will Include A Fy26 Effort From 1 October 2025 – 30 September 2026. note: Given The Highly Technical Nature Of Ssp’s Mission Set As A Major Weapons Systems Command And Corresponding Technical Requirements, Respondents Must Provide Recent And Relevant Past Performance Data (as Detailed Below) To Demonstrate And Substantiate The Respondents Ability To Successfully Execute Requirements Detailed In This Ssn. 6.0 White Paper Capability Statement Credentials a. Ssp Is Seeking Detailed, Complete, And Thorough White Paper Capability Statements From Interested Firms Who Can Demonstrate And Document, With Evidentiary Support, That They 1) Possess The Minimum Qualifications And Experience Identified In Paragraph 7.0 Which Are Critical To The Successful Execution Of The Requirements, And 2) Demonstrate Recent And Relevant Experience, As The Prime Contractor (or Subcontractor) Performing The Same/similar Efforts Of The Same/similar Scope, Size, And Complexity To The Requirements Identified In Paragraph 8.0. Interested Firms Must Demonstrate Their Existing Capability, Or Potential To Acquire The Capability, To Meet The Requirements Identified In Paragraph 8.0 Requirements By The Time Of Contract Award, Estimated To Be 1 October 2025. 6.1 Small Business Concerns iaw Far Subpart 19.2 Polices, Ssp Seeks To Provide Maximum Practicable Opportunities In Its Acquisitions To Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned Small Business, Hubzone Small Business, Small Disadvantaged Business, And Women-owned Small Business Concerns. Small Business Concerns Who Possess The Minimum Qualifications And Experience Identified In Paragraph 7.0 And Who Can Demonstrate Its Concerns’ Capability (or Ability To Obtain The Capability By The Contract Award Date) To Execute The Complete Requirements Identified In The Requirements Identified In Paragraph 8.0, As Well Provide The Requisite Past Performance Experience Detailed In Section 9.0, Are Encouraged To Respond To This Ssn. if A Small Business Concern Intends To Partner With Another Entity, The Small Business Concern Must Identify Which Specific Requirements Identified In Paragraph 8.0 Efforts/tasks It Intends To Perform, As Well As The Specific Efforts/tasks The Partner Will Perform, With The Substantiating Data Required In This Ssn Supporting The Identified Partnering Roles And Responsibilities. Note: 100% Of The Requirements Identified In Paragraph 8.0 Structure And Ssn Requirements Must Be Addressed In Any Submitted Partnering Submittal, If Obtainable. note: In The Event This Contract Is Set Aside For Small Business Concerns, The Small Business Concern Agrees That It Will Be In Strict Compliance And Conformance With The Percentage Payment Limitations For Services, Supplies, Or Construction (as Applicable) To Subcontractors That Are Not Similarly Situated Entities In Accordance With Far 52.219-14 Limitations On Subcontracting And State Such In Their Response. 7.0 Minimum Qualifications / Experience Requirements interested Firms Shall Document And Submit Specific And Evidenced / Demonstrated Possession Of The Minimum Qualifications And Experience Requirements In The Technical Areas Identified In Bullets A Through Z Below Which Are Critical To The Successful Execution Of The Requirements In Paragraph 8.0. This Experience Shall Be Documented As Specified In Paragraph 9.0. Potential Sources Must Have The Ability To, Or Have A Thorough Understanding Of The Following: hostile Environments, Natural Space Environments, Fratricide Environments, And Intrinsic Radiation Environments Relevant To Navy Rbs And Their Applicability To Vulnerability And Performance. Hostile Environments Include, But Are Not Limited To: Nuclear Weapons, Electromagnetic Radiation, Kinetic Energy Weapons, And Directed Energy Weapons. Natural Space Environments Include, But Are Not Limited To: Cosmic Radiation, Trapped Protons And Electrons, Solar Flares, And Coronal Mass Ejections. navy Rb’s Vulnerability And Performance Concerns Including Accuracy Perturbations Resulting From Exposure To Hostile Environments, Natural Space Environments, And/or Fratricide Environments. vulnerability And Effectiveness Of Navy Rbs And Rb Components In The Following Environments: Mechanical, Electrical, And/or Electromagnetic Effects. conduct Hostile And Fratricide Radiation Transport Calculations For Navy Reentry Systems. calculate Personnel Dose Rate In Both The Existing Ohio Class Submarine And The Planned Columbia Class Submarine. conduct Performance And Vulnerability Assessments For Normal, Abnormal And Hostile Environments In Support Of A New Thermal Protection Systems (tps) Development Program For Navy Rbs calculate Electromagnetic Attenuation, Signal Degradation, Or Radio Frequency Signal Blackout Brought On By Reentry Plasma Sheathing. conduct Independent Assessments Of Hypersonic Reentry Plasma Sheathing And Subsequent Effects On Electromagnetic Signal Transmission. conduct Ground Based Hostile Blast Analysis Using Computational Fluid Dynamics (cfd) Models. assist Ssp With Intrinsic Radiation (inrad) Studies At Both Ssp Facilities And On Board Ssbn’s, And Radioactive Waste Characterization, Storage And Disposal. analyze Biological Effects Of Radiation From Plutonium, Tritium And Uranium Including Emitter Effects. Analyze The Effects Of Postulated Radiological Events. analyze Results Of Site Contamination Surveys To Ensure A Safe Working Environment To Include Gamma And Neutron Test/surveys. evaluate, Monitor, Review, And Update All Navy Related Documentation Such As Special Weapons Ordnance Publications (swops), Directives, Instructions, Ordnance Documents (ods), Etc. conduct Independent Assessments Of The Transporting, Processing, Handling And Maintenance Procedures And The Monitoring Techniques (air And Surface) That Apply To Hazardous Materials (radioactive And Mixed Waste) And Gamma And Neutron Personnel Exposure. produce And/or Coordinate Requirements Documents Including Military Characteristics (mcs), Stockpile-to-target Sequences (stss), And Technical Objectives And Guidelines (togs). Provide Input Regarding The Dod Nuclear Weapon System Surety Program Key Elements As Detailed In Dodm 3150.02: Dod Nuclear Weapon System Surety Standards, Dod Nuclear Weapon System Surety Policy, Dod Nuclear Weapon Safety Design Criteria, Positive Measures, Safety Rules And Technical Procedures. conduct Evaluations Of Deployed And Advanced/future System Options Including Ballistic And Non-ballistic, Strategic And Tactical, Nuclear And Conventional Reentry Systems. These Evaluations Shall Include But Not Be Limited To Assessments Of The Survivability, Military Utility And Effectiveness, And Dynamics Of These Systems And Concepts In Normal, Abnormal And Hostile Environments Against The Full Spectrum Of Targets. evaluate And Support All Facets Of Nuclear Weapons Surety. Nuclear Weapons Surety Is Defined As Policies, Procedures, Controls And Actions That Encompass Safety, Security And Control Measures, Which Ensure There Will Be No Nuclear Weapons Accidents, Incidents, Unauthorized Detonation, Or Degradation Of Weapons Effectiveness During Its Stockpile-to-target Sequence. advise Ssp On The Impact Of Dod, Nnsa, Nrc, Code Of Federal Regulations, Don, State, And Local Radiological Regulations Affecting Navy’s Nuclear Weapons. conduct Independent Reviews/assessments And Evaluate Both Conventional And Nuclear Weapon System Safety Policies, Directives, Standards And Proposed Changes Pertinent To Conventional/nuclear Weapon System Surety/safety For Ssp Hq Staff, Field Activities (e.g. Notu, Swflant, Swfpac, Sws Ashore, Spf), Ssbns (including Us Columbia Class Ssbn And Uk Dreadnaught Ssbn), And Ssgns, Including, As Directed, Activities Associated With The United Kingdom Trident Program. conduct Independent Reviews Of Ssp Alterations (spalts), Change Requests Or Other Modifications, New Developments, Lightning Protection And Grounding Systems, Electrostatic Discharge (esd), Ssp Occupational Safety And Health (osh) Efforts, Operational Safety Reviews (osr), Special Safety Study (sss), And Independent Assessments Of System Safety Policies And Practices Iaw Dodi And Dodm 3150.02, Ssp 5100.6, Sspinst 5100.2 (series) And Other Sspinst, Ordnance Document (od), Secnav/opnav Directives Or Other Uk Trident Guidance. provide Expert Advice Regarding The Analysis And Interpretation Of Overarching Statutes, Policy, Directives, Regulations, Instructions, Etc. As They Specifically Apply To Ssp’s Classification & Declassification Management Efforts Based On Knowledge Of Organizational Stakeholders And Past, Current, & Planned Future States Of The Programs. provide Expert Classification Determination Support Based On Knowledge Of Security Classification Guides That Relate To All Aspects Of The Submarine Launched Ballistic Missile (slbm) Weapon System. calculate The Responses Of Us Components In The Uk Trident Reentry Body To Stockpile- To-target-sequence (sts) Level Hostile Environments, Consider Both Single And Multiple Exposures In Their Calculations. perform Fratricide Evaluations For The Uk Trident Reentry Body That Will Identify Potential Differences In The Stay-out Regions Caused By Uk Unique Constraints, And Assist The Uk In Understanding And/or Adopting The Current Us Common Fratricide Methodology. conduct Evaluations Of The Aerodynamic Performance Of The Uk Trident Reentry Body Using Data From U.s. Demonstration And Shakedown Operation (daso) Flight Test, Follow-on Commander Evaluation Test (fcet) Flights, And Other Experimental Flight Test For These Evaluations Conduct Evaluations Of The Effectiveness Of The Uk Trident Reentry Body Provide Electronic File Transmission Support Between The Uk, The Us Navy And Doe/nnsa Information System Repositories And Databases. advise Ssp On The Proficiency Of The Operations At Uk Trident Facilities. This Activity Will Include Participation In Inspections And Evaluations, Preparation Of Associated Supporting Reference Materials, Evaluation Of Uk Proposals, And Participation In Compatibility Assessments Or Slow Run-through Activities. 8.0 Description Of Requirements requirement: Ssp Is Seeking Responsible Sources For Engineering And Technical Services With An Emphasis On Navy Reentry Bodies (rb) Vulnerability And Performance, Systems Analysis And Effectiveness, Nuclear Weapons Surety And System Safety, Radiological Health And Radiation Control, Future Navy Program Development, And Be Familiar With Article Vi Of The Polaris Sales Agreement (psa) . Potential Sources Must Have The Ability To, Or Have A Thorough Understanding Of The Following: hostile Environments, Natural Space Environments, Fratricide Environments, And Intrinsic Radiation Environments Relevant To Navy Rbs And Their Applicability To Vulnerability And Performance. Hostile Environments Include, But Are Not Limited To: Nuclear Weapons, Electromagnetic Radiation, Kinetic Energy Weapons, And Directed Energy Weapons. Natural Space Environments Include, But Are Not Limited To: Cosmic Radiation, Trapped Protons And Electrons, Solar Flares, And Coronal Mass Ejections. navy Rb’s Vulnerability And Performance Concerns Including Accuracy Perturbations Resulting From Exposure To Hostile Environments, Natural Space Environments, And/or Fratricide Environments. vulnerability And Effectiveness Of Navy Rbs And Rb Components In The Following Environments: Mechanical, Electrical, And/or Electromagnetic Effects. conduct Hostile And Fratricide Radiation Transport Calculations For Navy Reentry Systems. calculate Personnel Dose Rate In Both The Existing Ohio Class Submarine And The Planned Columbia Class Submarine. conduct Performance And Vulnerability Assessments For Normal, Abnormal And Hostile Environments In Support Of A New Thermal Protection Systems (tps) Development Program For Navy Rbs. calculate Electromagnetic Attenuation, Signal Degradation, Or Radio Frequency Signal Blackout Brought On By Reentry Plasma Sheathing. conduct Independent Assessments Of Hypersonic Reentry Plasma Sheathing And Subsequent Effects On Electromagnetic Signal Transmission. conduct Ground Based Hostile Blast Analysis Using Computational Fluid Dynamics (cfd) Models. assist Ssp With Intrinsic Radiation (inrad) Studies At Both Ssp Facilities And On Board Ssbn’s, And Radioactive Waste Characterization, Storage And Disposal. analyze Biological Effects Of Radiation From Plutonium, Tritium And Uranium Including Emitter Effects. analyze The Effects Of Postulated Radiological Events. analyze Results Of Site Contamination Surveys To Ensure A Safe Working Environment To Include Gamma And Neutron Test/surveys. write, Evaluate, Monitor, Review, And Update All Navy Related Documentation Such As Special Weapons Ordnance Publications (swops), Directives, Instructions, Ordnance Documents (ods), Etc. conduct Independent Assessments Of The Transporting, Processing, Handling And Maintenance Procedures And The Monitoring Techniques (air And Surface) That Apply To Hazardous Materials (radioactive And Mixed Waste) And Gamma And Neutron Personnel Exposure. produce And/or Coordinate Requirements Documents Including Military Characteristics (mcs), Stockpile-to-target Sequences (stss), And Technical Objectives And Guidelines (togs). Provide Input Regarding The Dod Nuclear Weapon System Surety Program Key Elements As Detailed In Dodm 3150.02: Dod Nuclear Weapon System Surety Standards, Dod Nuclear Weapon System Surety Policy, Dod Nuclear Weapon Safety Design Criteria, Positive Measures, Safety Rules And Technical Procedures. conduct Evaluations Of Deployed And Advanced/future System Options Including Ballistic And Non-ballistic, Strategic And Tactical, Nuclear And Conventional Reentry Systems. These Evaluations Shall Include But Not Be Limited To Assessments Of The Survivability, Military Utility And.effectiveness, And Dynamics Of These Systems And Concepts In Normal, Abnormal And Hostile Environments Against The Full Spectrum Of Targets. evaluate And Support All Facets Of Nuclear Weapons Surety. Nuclear Weapons Surety Is Defined As Policies, Procedures, Controls And Actions That Encompass Safety, Security And Control Measures, Which Ensure There Will Be No Nuclear Weapons Accidents, Incidents, Unauthorized Detonation, Or Degradation Of Weapons Effectiveness During Its Stockpile-to-target Sequence. advise Ssp On The Impact Of Dod, Nnsa, Nrc, Code Of Federal Regulations, Don, State, And Local Radiological Regulations Affecting Navy’s Nuclear Weapons. conduct Independent Reviews/assessments And Evaluate Both Conventional And Nuclear Weapon System Safety Policies, Directives, Standards And Proposed Changes Pertinent To Conventional/nuclear Weapon System Surety/safety For Ssp Hq Staff, Field Activities (e.g. Notu, Swflant, Swfpac, Sws Ashore, Spf), Ssbns (including Us Columbia Class Ssbn And Uk Dreadnaught Ssbn), And Ssgns, Including, As Directed, Activities Associated With The United Kingdom Trident Program. conduct Independent Reviews Of Ssp Alterations (spalts), Change Requests Or Other Modifications, New Developments, Lightning Protection And Grounding Systems, Electrostatic Discharge (esd), Ssp Occupational Safety And Health (osh) Efforts, Operational Safety Reviews (osr), Special Safety Study (sss), And Independent Assessments Of System Safety Policies And Practices Iaw Dodi And Dodm 3150.02, Ssp 5100.6, Sspinst 5100.2 (series) And Other Sspinst, Ordnance Document (od), Secnav/opnav Directives Or Other Uk Trident Guidance. provide Expert Advice Regarding The Analysis And Interpretation Of Overarching Statutes, Policy, Directives, Regulations, Instructions, Etc. As They Specifically Apply To Ssp’s Classification & Declassification Management Efforts Based On Knowledge Of Organizational Stakeholders And Past, Current, & Planned Future States Of The Programs. provide Expert Classification Determination Support Based On Knowledge Of Security Classification Guides That Relate To All Aspects Of The Submarine Launched Ballistic Missile (slbm) Weapon System. calculate The Responses Of Us Components In The Uk Trident Reentry Body To Stockpile- To-target-sequence (sts) Level Hostile Environments, Consider Both Single And Multiple Exposures In Their Calculations. perform Fratricide Evaluations For The Uk Trident Reentry Body That Will Identify Potential Differences In The Stay-out Regions Caused By Uk Unique Constraints, And Assist The Uk In Understanding And/or Adopting The Current Us Common Fratricide Methodology. conduct Evaluations Of The Aerodynamic Performance Of The Uk Trident Reentry Body Using Data From U.s. Demonstration And Shakedown Operation (daso) Flight Test, Follow-on Commander Evaluation Test (fcet) Flights, And Other Experimental Flight Test For These Evaluations. conduct Evaluations Of The Effectiveness Of The Uk Trident Reentry Body. provide Electronic File Transmission Support Between The Uk, The Us Navy And Doe/nnsa Information System Repositories And Databases. advise Ssp On The Proficiency Of The Operations At Uk Trident Facilities. This Activity Will Include Participation In Inspections And Evaluations, Preparation Of Associated Supporting Reference Materials, Evaluation Of Uk Proposals, And Participation In Compatibility Assessments Or Slow Run-through Activities. 8.1 Place Of Performance within Walking Distance (less Than ½ Mile) Of The Washington Navy Yard Dc, United States: Host An Esn Terminal And Esn Vtc Capability. Esn Is The Only Classified Conduit To Discuss Secret Rd/frd Or Cnwdi Data With Nnsa As Well As Secret Atomic And Secret Atomic Principle Data With The United Kingdom. Ssp Does Not House This Capability. classified Conference Rooms For Meetings Between Department Of Navy And Department Of Energy. within Driving Distance (less Than 10 Miles) Of Sandia National Laboratories In Albuquerque, Nm, United States: esn Terminal And Esn Vtc Capability. classified Conference Rooms For Meetings Between Department Of Navy And Department Of Energy. within Driving Distance (less Than 10 Miles) Of Colorado Springs, Co maintain Hostile And Vulnerability Test Capabilities. 9.0 Evidentiary Qualifications/experience Documentation Requirements interested Firms Must Possess The Requisite Minimum Qualifications And Experience Identified In Paragraph 7.0 And Demonstrated Relevant And Recent Experience As It Relates To The Requirements In Paragraph 8.0. White Paper Capability Statements Must Include All Of The Content And Details Identified Below: 9.1 Minimum Qualifications / Experience Requirements Validation white Paper Capability Statement Submissions Shall Include A Discrete Section With The Heading “minimum Qualifications / Experience Requirements” And Document, With Specific Information, Each Of The Minimum Qualifications Identified In Paragraph 7.0. This Section May Cite Contract Reference Efforts Detailed In Table A Of Paragraph 9.2 Below Provided That Respondents Provide Context And Rationale As To How That Contract Reference Effort(s) Demonstrate Possession Of The Applicable Minimum Qualifications / Experience Requirements Of Bullets A Through Z Identified In Paragraph 7.0 – Or Have Capability Of Obtaining By Contract Award. 9.2 Relevant & Recent Experience / Supporting Narratives in Addition To Demonstrating Possession Of The Requisite Minimum Qualifications / Experience Requirements Identified In Paragraph 7.0 Above (or Have Capability Of Obtaining By Contract Award), Interested Firms Shall Demonstrate Relevant And Recent Experience Performing The Same Or Similar Efforts And Or Completion Tasks (as Applicable) To The Requirements In Paragraph 8.0. Relevant Experience Is Defined As Performing Efforts/tasks Similar In Scope, Size, And Complexity As The Ssn Clin Structure With An Annual Incurred Cost/expense Of At Least $10m. Recent Experience Is Defined As Work Performed Within 5 Years Of The Ssn Posting Date. To Substantiate The Performance Of Relevant And Recent Efforts/tasks To The Ssn Clin Requirements, White Paper Capability Statements Shall Provide A List Of Current Or Previous Contract References And The Efforts/tasks Performed Thereunder Detailing And Evidencing A Direct Correlation Of The Contract Reference Efforts/tasks To The Ssn Clin Structure Using The Specific Outline Provided In Table A Below. Submitter’s Responses To The Table A Ssn Clin Outline Shall Include The Following Information Per Individual Contract Reference: summary Of Relevant Work Performed And How That Specific Work Demonstrates Capability To Perform The Specific Requirements Identified In The Ssn Clins; current / Prior Contract Number(s) And Customer/agency Supported; identification Of Your Role As The Prime Or Subcontractor; contract Type: Cost Plus Fixed Fee Loe period Of Performance Of The Specific Contract Reference Effort Performed; quantity Of Fte Personnel Utilized On The Specific Contract Reference Effort, Per Annum, With Distinction And Fte Quantities Identified Between The Respondents Fte Employees And Any Subcontractor Fte Employees; net Dollar Value (base And Options) For Each Contract Reference And The Annual Incurred Costs For Each Contract Reference Provided Which Demonstrates The Magnitude Of Those Contract References In Comparison To The Annual Estimated Value Cited In Paragraph 9.2 Above. Note: Solely Citing An Idiq Ceiling Amount Or Base And All Options Aggregate Value Without The Annual Incurred Costs For The Submitted Contract Reference(s) Is Not Acceptable – Amounts Must Be Specific To The Actual Incurred Costs For A Contract Clin(s) Or Individual Task Order(s), For The Contract Reference(s) Cited In Table A Below; And customer Point Of Contact (poc) With Valid Phone Number And Email. table A – Summary Of Relevant & Recent Work Experience ssn Clin Requirement Contract Reference(s) Summary – Document The Specific Correlation Of The Contract Reference Efforts/tasks To The Ssn Clin Efforts/tasks 0001 0001- System Assessment And Vulnerability 0002 0002- Reentry Systems Mk4b Development 0003 0003- W93/mk7 Reentry System Development Support 0004 0004- Sp20124 Weapon System Safety 0005 0005- United Kingdom (uk) Mk4a Support 0006 0006- United Kingdom (uk) Trident Program Support 0007 0007- United Kingdom (uk) A21/mk7 Programmatic And Testing Support 0008 0008- Weapons Systems Refurbishment / Modification Programs 0081 0081- Weapons Systems Refurbishment/modification Programs 0009 0009- Future Flexibility 0010 0010- Future Sea-based Strategic Weapon (fssw) Program 0011 0011- Missile Assessment And Survivability Support 0012 0012- Le2 Missile Development Survivability Support 0013 0013- Slcm-n Development Program 0131 0131- Slcm-n Esn Area Construction 0014 0014 - Missile Life Extension Programs (d5le2) 0015 0015- Sp202 Systems Analysis And Effectiveness 0016 0016- Sp28 Intrinsic Radiation (inrad) Survey 10.0 Company Information And Deadline For Submittal white Paper Capability Statements Shall Be Submitted In Pdf Format And Are Due No Later Than January 10, 2025 1700 Eastern. The White Papers Shall Not Exceed 20 Pages In Total, Using 12-point Times New Roman And 1” Margin And Shall Be Submitted Via E-mail To Kurt.geisinger@ssp.navy.mil. all White Paper Capability Submittals Shall Include The Following Information “not” Included In The Aforementioned Maximum 20-page Limit: company Administrative Information company Name: company Point Of Contact (email And Phone) And Title: company Address: unique Entity Identifier (uei) No: cage Code: size Of Business, Including; Total Annual Revenue, By Year, For The Past Five Years And Number Of Employees; ownership, Including Whether: Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned Small Business, Hubzone Small Business, Small Disadvantaged Business, And Women-owned Small Business Concerns; number Of Years In Business; identification Of The Current Security Clearance Held At Your Facility That Will Provide Support To The Clin Structure. Note: Work To Be Performed Under This Contract Shall Require The Contractor To Have A Facility Clearance Of Top Secret And A Computing Facility That Is Cleared To Process Top Secret Data. respondents To This Ssn Shall Indicate Which Portions Of Their Response Are Proprietary/business Sensitive And Should Mark Them Accordingly. It Is The Responsibility Of The Ssn Respondent To Monitor The Sam.gov Website For Additional Information Pertaining To Any Potential Acquisition. 11.0 Government Assessment the White Paper Capability Statement Responses To This Ssn Must Meet The Requirements Stated In The Ssn And Will Be Reviewed To Determine Whether Each Respondent Is Capable Of Performing The Requirements. This Review Will Be Based Solely On The Specific Data And Supporting Content Provided By The Respondents In Their White Paper Capability Statement Submissions And Responses To Any Follow On Clarification Inquires Submitted By The Government. Incomplete Or Generalized White Paper Capability Statements, Without Specificity As It Relates To The Ssn Content Requirements, Omitted Content, Or Content Which Fails To Address All Of The Requirements Of This Ssn, Will Have A Direct Affect Upon The Government’s Assessment Of The White Paper Submittal. The Government’s Assessment Will Include, But Is Not Limited To, The Following: (1) The Respondent’s Specific And Evidenced / Demonstrated Possession Of The Minimum Qualifications / Experience Requirements Identified In Paragraph 7.0; (2) The Respondent’s Demonstrated Ability To Manage, As A Prime Or Subcontractor, The Types And Magnitude Of Requirements Identified In The Ssn Clin Structure Based On Their Relevant And Recent Performance Of Same/similar Efforts/tasks In Terms Of Scope, Size, And Complexity; (3) The Respondent’s Demonstrated Technical Ability, As A Prime Or Subcontractor, To Execute The Ssn Clin Structure Based On Their Relevant And Recent Performance Of Same/similar Efforts/tasks In Terms Of Scope, Size, And Complexity; And (4) The Respondent’s Demonstrated Capacity To Execute The Clin Structure Based On Their Relevant And Recent Performance Of Same/similar Efforts In Terms Of Scope, Size, And Complexity, The Quantity Of Personnel Required, And The Contract Award Date. 12.0 Ssn Disclaimer this Ssn Is Issued Solely For Market Research Purposes. It Does Not Constitute A Request For Proposal (rfp) Nor A Promise To Issue An Rfp In The Future. This Ssn Does Not Commit The Government To Solicit Or Award A Contract. The Information Provided In The Ssn Is Subject To Change And Is Not Binding On The Government. Respondents Are Advised That All Costs Associated With Responding To This Ssn, Including Any Requests For Follow-up Information, Will Be Solely At The Interested Parties’ Expense And The Government Will Not Pay For Any Information Or Costs Incurred Or Associated With Submitting A Ssn White Paper Capability Statement Or Follow-on Responses. the Government Reserves The Right To Consider A Set-aside For Small Businesses Or One Of The Small Business Preference Groups. (e.g., Small Business, Service-disabled Veteran-owned Small Business, 8(a), Hubzone Small Business, And Women-owned Small Business Programs).

Details: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|iso 9001| inspection Of Supplies--fixed-price (aug 1996)|2||| higher-level Contract Quality Requirement|6|x|||||| inspection And Acceptance Of Supplies|26||||||||||||||||||||||||||| time Of Delivery (june 1997)|20|0001|71|170|||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo|n/a|to Be Determined (tbd)|n00104|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (dod Contracts)- Basic (dec 2019)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| requirements For Certified Cost Or Pricing Data And Data Other Than Certified Cost Or Pricing Data-modifications (nov 2021))|7|||||||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|x|x|||||||||||| small Business Program Representations (feb 2024)|4||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| certification Regarding Knowledge Of Child Labor For Listed End Products(feb 2021))|4||||| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| cost Accounting Standards Notices And Certification (deviation 2018-o0015)(may 2018))|1|| requirements For Submission Of Proposals Via Electronic Media (jan 2018)|1|email| type Of Contract (apr 1984)|1|firm-fixed Price| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| requirements For Certified Cost Or Pricing Data And Data Other Than Certifiedcost Or Pricing Data (may 2024))|1|| the Offer Due Date For This Solicitation Is Hereby Extended Until 4:30 Pm Eastern Usa Time On Friday, 17-january-2025. please Submit Offers Earlier If Possible, But Definitely Not Later As Late Submissions Will Not Be Accepted. all Other Terms And Conditions Remain Unchanged. \ the Offer Due Date For This Solicitation Is Hereby Extended Until 4:30 Pm Eastern Usa Time On Friday, 22-november-2024. All Offers Must Be Received On Or Before This Due Date As No Late Offers Will Be Accepted. all Other Terms And Conditions Remain Unchanged. \ the Offer Due Date For All Responses To This Solicitation Is Hereby Extended By 30 Days To Wednesday, 23-october-2024. all Offers Are Due By 4:30 Pm Eastern Usa Time On 23-oct-2024. Please Submit Earlier, If Possible, But Definitely Not Later. all Other Terms And Conditions Remain Unchanged. \ the Offer Due Date For This Solicitation Is Hereby Extended By 30 Days, From 22-august-2024 To 23-september-2024. please Submit Your Offer Sooner Than This Due Date, If Possible, But Definitely Not Later. other Other Terms And Conditions Remain Unchanged. \ due To Government Delay, The Offer Due Date On This Solicitation Is Hereby Extended To 4:30 Pm Eastern Usa Time On Thursday, 22-august-2024. please Submit Earlier If Possible, But Definitely Not Later Than This Revised Offer Due Date. all Other Terms And Conditions Remain Unchanged. \ offerors Should Submit All Questions No Later Than One (1) Week Prior To The Initial Solicitation Closing Date. The Government Is Not Required To Answer Questions Received After This Date. Unless Otherwise Stated In An Amendment, Extensions To The Solicitation due Date Will Not Extend The Date For Questions From Potential Offerors. the Government Intends To Award A Single Contract Under This Request For Proposal (rfp). The Government Also Intends To Award Without Discussion, So All Questions Or Requested Amendments Should Be Addressed Prior To Closing. The Government Reserves The Right To contact Offerors For Clarification, Or Conduct Discussions If The Procurement Contracting Officer Determines Discussions Necessary In Accordance With Far 15.306(a). \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Electronic Componen . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Electronic Componen Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;7y193 H409939-4 ; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: Presolicitation Notice this Is Not A Request For Proposal. This Is A Request For Sf 330's Architect/engineer Qualification Packages Only. all Information Needed To Submit Sf 330 Documents Is Contained Herein. No Solicitation Package Will Be Issued In This Phase. architect-engineering (a/e) Design Services: the Department Of Veteran Affairs Network 7 Contracting Office Is Seeking Qualified Architect-engineering (ae) Firms To Submit Standard Form 330 (sf 330) Architect/engineering Statement Of Qualifications For Project # 521-25-103 | Design To Replace Roofing Over East Side Of Bvamc | Birmingham Va Medical Center Facilities In Network 7 (state Of Alabama). Firms Submitting Qualification Packages Must Be Fully Licensed To Perform Designs As A Registered Professional Ae Firm In The United States To Be Considered For This Opportunity. Also, See Geographic Location Restriction In Paragraph 5 Of This Notice. network Contracting Office (nco) 7 Va Facility Locations Include: birmingham Va Medical Center, 700 19th Street South, Birmingham, Al., 35233. this Acquisition Is 100% Set-aside For Small Disabled Veteran-owned Small Business (sdvosb). prospective Contractors Are Cautioned That Proposal Submitted In Response To This Solicitation Must Meet The Criteria Identified By 38cfr, Part 74. The Sdvosb Concern Agrees That In The Performance Of The Contract, The Concern Will Comply With The Limitation On Subcontracting Requirements In Accordance With Vaar Clause 852-219-73 (jan 2023) (deviation), Va Notice Of Total Set-aside For Verified Service-disabled Veteran-owned Small Businesses. for A Service-disabled Veteran Owned Small Business (sdvosb) To Be Considered As A Prospective Contractor, The Firm, Including Joint Ventures, Must Be Verified And Registered In The Vetcert (veterans.certify.sba.gov) And Registered In The System For Award Management (sam) Database (www.sam.gov) At Time Of Submission Of Their Qualification And Reporting To Vets - 4212 Federal Contractor Reporting In Accordance With Far 52.222-37, Employment Reports On Veterans At The Following Website: Dol.gov/agencies/vets/programs/vets4212. Failure Of A Prospective Sdvosb To Be Verified By The Veteran Small Business Certification At The Time The Sf 330 Is Submitted Shall Result In Elimination From Consideration. All Joint Ventures Must Be Cve Verified At Time Of Submission And Submit Agreements That Comply With 13cfr 125.15 Prior To Contract Award. contract Overview: A Firm Fixed Price A/e Design Service Contract Is Contemplated For Project 521-25-103 | Design To Replace Roofing Over East Side Of Bvamc. The Estimated Magnitude Of Construction For This Project Is Between $100,000 And $250,000. The Estimated/target Design Completion Period Is 165 Calendar Days After Issuance Of Notice To Proceed. The Naics Code For This Acquisition Is 541330, Engineering Services With A Size Standard Of $25.5 Million. project Scope: The A/e Team, Including Architects, Engineers, Surveyors, And Professional Consultants Shall Provide Complete Design Services For The Development Of Specifications And Drawings For Project 521-25-103. The Objective Of This Project Is To Design The Demolition And Complete Roof Replacement Of Approximately 13,000 Sf Of Membrane Roofing Over The East Side Of The Bvamc Area Over The Following: 3rd Floor L Wing, 2nd Floor Radiology Department Mri Equipment, 2nd Floor Radiology Reading Room, And The 9th Floor Leadership Offices. The Replacement Of The Roof System Will Include The Roof, Flashing, Trim And Soffit. The Lightning Protection System (lps)will Require Removal And Reinstallation. Some (lps) Components May Require Replacement. Remove And Replace Roof Vents. due To The Requirement For Site Visits And Coordination On Design Reviews, A/e Firms Will Be Required To Attend Various Meetings In Person On Site At Birmingham, Al Vamc Facilities. Due To This Requirement, The Area For Consideration For This Acquisition Is Restricted To A/e Firms With An Operating Office Located Within 400 Miles Of Birmingham Va Medical Center, 700 19th Street South, Birmingham, Al., 35233. Eligible Prime Contractor Firms Must Have A Main And/or Branch Office Geographically Located Within The 400-mile Driving Distance. (determination Of Mileage Eligibility Will Be Based On Upon Www.google.com/maps) selection Criteria. The A/e Source Selection Team Shall Utilize The Following Selection Criteria Listed In Descending Order Of Importance. professional: Professional Qualifications Necessary For Satisfactory Performance Of Required Service And Working Together As A Team (in-house And/or Consultants(s)). Note: The Firm And A/e On Staff Representing The Project Or Signing Drawings In Each Discipline Must Be Registered/licensed To Practice In The United States Provide Your Information On The Sf 330 Clearly Marked By Providing A Current Architect And/or Engineering License Numbers And Proof Of Licensure. The Va Will Confirm The Individuals Are Current And In Good Standing With The Respective State Licensing Board.â  specialized: Specialized Experience And Technical Competence In The Type Of Work Required, Including But Not Limited To: Architecture, Electrical, Plumbing, Mechanical, Fire Protection, Abatement/industrial Hygiene, Cost Estimation, Project Management And Where Appropriate, Experience In Energy Conservation, Pollution Prevention, Waste Reduction, And The Use Of Recovered Materials. (include Government And Private Experience On Similar Projects). capacity: This Factor Evaluates Firm's Experience With Similar Size Projects And The Available Capacity Of Key Disciplines When Evaluating The Capacity Of A Firm To Perform The Work In The Required Time. The General Workload And Staffing Capacity Of The Design Office Will Be Evaluated. List Current Projects With Similar Design Fee Being Designed In The Firms Office. Indicate The Firms Present Workload And The Availability Of The Project Team (including Sub-consultants) For The Specified Contract Performance Period; Describe Experience In Successfully Delivering Projects Per Performance Schedule, Providing Timely Construction Support, And Successfully Completing Multiple Projects With Similar Delivery Dates. past Performance: Cpars Data Or Past Performance Questionnaires Must Be Provided For Projects Submitted Under Factor 2 (specialized Experience). Failure To Provide Requested Data, Accessible Points Of Contact Or Valid Phone Numbers Could Result In A Firm Being Considered Less Qualified. Past Performance As It Relates To Cost Control, Quality Of Work, And Compliance With Performance Schedules. The Following Information Is Required For All Projects: Contract/task Order Number, Project Title, Prime Firm, Start Date, And Completion Date. Evaluations May Also Include Additional Performance Related From The Firm, Customer Inquiries, Government Databases, Publicly Available Sources, And Additional Projects In Cpars. past Performance Will Be Evaluated On Recent And Relevant Contracts With Government Agencies Or Private Industry. recent Is Defined As Performance Occurring Within 5 Years Of The Date Of This Notice, Except That Ongoing Projects Must Have Begun No Less Than One (1) Year Prior To The Issuance Of This Notice. relevancy Is Defined As Performance Of Work On Projects That Are Similar In Scope To The Types Of Projects Anticipated Under The Resultant Contracts. respondents With No Previous Past Performance Shall State This When Addressing The Selection Criteria. Where There Is No Record Of Past Performance, The Proposal Will Be Evaluated Neither Favorably Nor Unfavorably. location: Knowledge Of The Locality, To Include Specific Knowledge Of Certain Local Conditions Or Project Site Features, Such As Geological Features, Climatic Conditions, Local Construction Methods, Construction Firms And Trades Labor Availability, And Local Laws And Regulations. That Your Proximity To The General Geographical Area Enables You To Respond To Emergency Calls In Person Within 24 Hours If Required. (sf 330 Submittal Should Show Your Knowledge Of The Locality Of The Project.) Eligible Prime Contractor Firms Must Have A Main And/or Branch Office Geographically Located Within The 400-mile Radius. Distance Will Be Determined By Google Maps. commitment: The Extent To Which Potential Contractors Identify And Commit To The Use Of Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors. construction Period Services: Experience In Construction Period Services To Include Professional Field Inspections During The Construction Period, Review Of Construction Submittals, Support In Answering Requests For Information During The Construction Period, And Support Of Construction Contract Changes To Include Drafting Statements Of Work, And Cost Estimates. selection Procedures. this Requirement Is Being Procured In Accordance With The Brooks Act Of 1972, Federal Acquisition Regulation 36.6 (far) And Va Acquisition Regulation 836.6 (vaar) And Va Acquisition Manual (vaam) 836.6. Firms Responding To This Announcement By Submitting A Qualifying Sf 330, Before The Closing Date And Time, Will Be Considered For Initial Selection Evaluation. Following Initial Evaluation Of The Sf330s Received Three Or More Firms That Are Considered The Most Highly Qualified To Provide The Type Of Services Required Will Be Selected For Interviews. Selected Firms Will Be Notified By Telephone Or Email Of Selection And Provided Further Instructions. selection And Evaluation Of Firms Shall Be Made Based On Sf 330 Submissions And Direct Responses To The Selection Criteria Identified Herein. Failure To Address All Selection Criteria Will Result In A Decreased Rating. evaluating Past Performance And Experience May Include Information Provided By The Firm, Customer Inquiries, Government Databases, And Contracting Officer Knowledge Of Current Project Performance. Failure To Provide Requested Data, Could Result In A Firm Being Removed From Consideration. If Relevant Cpars Evaluation(s) Are Available, Report(s) Shall Be Submitted With The Completed Sf330 Package. If There Is Not A Completed Cpars Evaluation, The Ppq Included With This Notice Is Provided For The Offeror Or Its Team Members To Submit For Each Project Included In Criterion (2). Official Cpars Evaluation(s) Found In In Government Databases Will Take Precedence. Completed Ppqs Should Be Submitted With Your Sf330. firms That Design Or Prepare Specifications In Conjunction With This Contract Are Prohibited From Participating On Any Future Construction Contracts Based On Those Documents. All Projects Identified On The Sf330 Must Be Completed By The Office/branch/individual Team Member Performing The Work Under This Contract. submission Requirements. the Sf 330 Form May Be Downloaded From Http://www.gsa.gov/portal/forms/type/sf. Completed Sf 330 S Shall Include The Primary Firms, Subcontractor Firms And Any Consultants Expected To Be Used On The Project. Do Not Submit Information Incorporating By Reference. Prospective Firms Shall Address All Selection Criteria Factors Within Their Submitted Sf330 Packages. the Following Format Should Be Used: cover Page With Solicitation Number, Project Title. table Of Contents. Sf 330. acceptability Under Other Appropriate Evaluation Criteria, I.e., Sf 330, Section H. copy Of Current A/e State Engineer/architect License. unique Entity Id (uei). tax Id Number. the E Mail Address And Phone Number Of The Primary Point Of Contact. sf 330 Date Of Receipt/due Date: Interested Firms Having The Capabilities To Perform This Work Must Submit One (1) Electronic Sf 330 And Attachments (if Any) No Later Than (nlt) January 17, 2025, At 1:00 P.m. Cst. Email Capacity Is Limited To Seven (7) To Ten (10) Megabytes (megs). all Sf330 Submittals And Questions Must Be Sent Electronically To The Attention Of Contracting Officer William C. Barton, William.barton2@va.gov. Please Also Copy Joseph.osborn@va.gov In Emailed Sf 330 Package. Please Provide Pre-solicitation Number, Project Title, And Firm Name In Subject Line Of Email. When Submitting Sf330s, If More Than One Email Is Sent, Please Number Emails In Subjects As 1 Of __ . Submittals Received After The Date And Time Identified On Page One (1) Will Not Be Considered. Firms Not Providing The Required Information May Be Negatively Evaluated. Facsimile Submittals Will Not Be Accepted. All Information Must Be Included In The Sf330. the Sf-330 Including Title Page, Table Of Contents, And Any Other Relevant Information Shall Not Exceed A Total Of 50 Pages In A Common Font Size 12 Font, Single Spaced. The Proposal Shall Be Submitted As A Single Application-generated (not Scanned), Searchable Pdf Document. A Page Is Defined As Each Face Of An 8.5 X 11-inch Sheet Of Paper Containing Information. The Page Limitation Does Not Apply To The Licenses, Contract Performance Evaluations, (i.e., Cpars) And Award Documentation. This Information Should Be Provided As Attachments To The Sf 330. all Questions Regarding This Announcement Must Be Emailed To The Contract Specialist William.barton2@va.gov And Contracting Officer Joseph.osborn@va.gov No Later Than January 17, 2025 By 1:00 P.m. Cst To Allow Time To Respond. site Visits Will Not Be Arranged During This Phase. this Announcement Is Not A Request For Proposal. This Is A Pre-solicitation Notice For Architect/engineering (a/e) Design Services; No Solicitation Package Will Be Issued Until After An Evaluation Has Been Made On The Provided Sf-330. Only The A/e Firms Responding To This Announcement By Submitting An Sf330 Package On Time Will Be Considered For Initial Evaluation.

Details: Contact Information|4|n7m3.12|eay|7176053233|jamie.kershaw@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|combo-invoice & Receiving Report||tbd|n00104|tbd|tbd|see Schedule|tbd|see Schedule|n/a|n/a|n/a|n/a|n/a|n/a|| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| small Business Subcontracting Plan (sep 2023)|4||||| safeguarding Sensitive Conventional Arms, Ammunition, And Explosives (nov 2023))|9|||||||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (oct 2024)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334412|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| offerors Shall Submit Proposals Via Neco Or Email Only. Casrep Accelerated Delivery Is Encouraged And Accepted At No Additional Cost To Government. all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: 100 Days government Source Inspection (gsi) Is Required. please Note Freight Is Handled By The Navy As Per The Commercial Asset Visibility (cav) Statement Of Work. your Quote Should Include The Following Information: Quote Amount And Rtat - Unit Price:__________ - Total Price:__________ - Repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractor's Facility As Reflected In The Action Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Check One: Firm-fixed-price ___ Estimated ___ Not-to Exceed (nte): ___ Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location - Awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As "awardee Cage": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As "awardee Cage":__________ Iot Compare Repair Price To Price To Buy New New Unit Price:__________ New Unit Delivery Lead-time:__________ important Note: Any Asset For Which The Contractor Does Not Meet The Required Rtat Will Incur A Price Reduction Per Unit/per Month The Contractor Is Late - Any Delay Determined To Be Excusable (e.g. Government Delay) Will Not Result In A Price Reduction. If A price Reduction Is Required Due To Unexcusable Contractor Delay, The Contracting Officer Will Implement The Aforementioned Price Reduction Via A "reconciliation Modification" At The End Of The Contract Performance. Price Reductions Made Pursuant To This Section shall Not Limit Other Remedies Available To The Government For Failure To Meet Required Rtats, Including But Not Limited To The Government's Right To Terminate For Default. in Reference To The Above Important Note, The Contractor Provides The Following Price Reduction Amount Per Unit Per Month The Contractor Does Not Meet The Rtat: $__________, Up To A Maximum Of: $_________. \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall be Performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other contractor Or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;7y193 H418517-1; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 4.4 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer.

Details: In Addition To Structural Renovations In The Front Portal, The Hanging Rods In The Exhaust Air Duct And Various Structural Adaptations For The Operating And Safety Equipment, The Services In Question Also Include Comprehensive Partial Renovations Of The Operating And Safety Technology In The Tunnel. The Partial Renovation Of The Electrical And Mechanical Equipment Essentially Includes The Renewal Of Msp, Adaptation Of Nsp, Retrofitting Of The Lighting System, Mechanical Renovation Of Flaps And Ventilation, Renewal Of The Sensors, Retrofitting Of Fasi And Vde, Renewal Of The Video Surveillance System, Retrofitting Of Acute Systems, Renewal Of Emergency Calls, Public Address Systems And Radio Component, Conversion Of The Information Transmission System As Well As Adaptation Of The Information Processing System And Other Operating Systems In Accordance With The Construction Description.

Details: The three-story apartment building in the Kienbaum district has 3 staircases with 6 apartments each. The 18 apartments are divided into 3 four-room apartments, 3 one-room apartments, 6 two-room apartments and 6 three-room apartments. In the basement there are the tenants' cellars, a washing machine room and a technical room per staircase. It is a solid reinforced concrete prefabricated building with a full basement. The repair work includes the renovation of the electrical distribution system throughout the entire property. The repair work is being carried out in 3 stages, staircase by staircase, with 6 residential units each. Please refer to the attached tender documents for details.

Details: The Potsdam Institute for Climate Impact Research EV (PIK for short) is planning to renovate and expand the attic in building A26 on Telegrafenberg in Potsdam. As a preparatory measure for the expansion, the electrical installation must be re-laid and dismantled/disposed of. Kg 457 Transmission networks: In preparation for the roof extension, the application-neutral data network must be upgraded by relocating the central data distributor. Because construction work is being carried out during ongoing operations, a new data infrastructure must be set up in parallel. A new data distributor room including the data racks must be built and put into operation in the basement. The corresponding data network at the workstations with the RJ45 jacks will be used provisionally without an up- or AP socket. Only then can the central data distributor in the attic be dismantled. Application-neutral structured cabling based on RJ45 will be installed to supply the workstations and areas of use. The transmission network is to be set up for class Ea, category 6a, 500 MHz in accordance with EN-50173. 2 double RJ45 sockets are planned for each workstation. In addition, connection options for a WLAN access point with 4 ports per floor are provided. Kg 494 Dismantling and disposal of electrical installation in the attic: In preparation for the attic conversion, the installations in the attic must be professionally disconnected, dismantled and disposed of properly. Before dismantling, the data infrastructure in the basement must be rebuilt and put into operation.

Details: Description Republic Of The Philippines Department Of Health Western Visayas Sanitarium And General Hospital Santa Barbara, Iloilo Invitation To Bid For Supply, Delivery And Installation Of Various Hospital Equipment Ib No. 2024-12-018-g The Western Visayas Sanitarium, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Various Hospital Equipment Location : Western Visayas Sanitarium And General Hospital, Inangayan, Santa Barbara, Iloilo Approved Budget For : Php 34,665,000.00 The Contract (abc) Fund Source : Caf No. 2024-133-gf Delivery Period : Within Ninety (90) Working Days After Receipt Of The Notice To Proceed Line Items Abc: Php 34,665,000.00 Lot 1 No. Description Unit Of Measure Quantity Approved Budget Cost (php) 1 Electrical Machine. Brand New. Product Specifications: Combination Of Electrotherapy And Ultrasound; With 3 Independent Channels And Body Diagram Installed; Power Supply: Ac 100- 240 V, Number Of Channels: 3 Independent (2 For Electrotherapy, 1 For Ultrasound) Electrotherapy; Ten& Ems, Ultrasound Functions; Electrode Pads For Tens & Ems; Us Probe Head: Large And Small. Warranty -1 Year From Delivery And Installation. Unit 1 290,000.00 2 Hand Dynanometer. Brand New. Product Specifications: Hydraulic Adjustable Handle. Strength Can Be Viewed In Pounds Or Kilogram. Can Measure Up To 90kg (200lbs.). Durable Metal Gauge. Warranty –at Least 6 Months Upon Delivery And Installation. Unit 1 55,000.00 3 Parallel Bars. Brand New. Product Specifications: Adjustable And Foldable. Stainless Steel Bars And Steel Base. Height Adjust Within 26''-40''. Width -24''-36". Length Ranges: 7-10 Feet. Warranty -at Least 6 Months Upon Delivery And Installation Unit 1 50,000.00 4 Pulley System. Brand New. Product Specifications: Single Handle/dual Tower. Chest And Floor Height Mounted Handle. Easily Adjustable Handles. Wheelchair Accessible. Warranty –at Least 1 Year Upon Delivery And Installation. Unit 1 150,000.00 5 Pbx, Smart Hybrid. Brand New. Product Specifications: Designed For Telemedicine Use. Genuine And High Quality Brand. Pabx Built-in Extensions 16 Analog. At Least 2 Card Slots And 2 Slots Trunk Extension Card Switch System. Ability To Equip Sub-frame Ns-320; 12-32 Trunk Extensions. Sub-frame To Extend Pbx Ns300. Port Connected To The Main Frame. Dimensions: 40-45 X 35-36 X 86-90 Cms. Warranty –at Least 6 Months From Delivery And Installation * Unit 1 100,000.00 6 Uninterrupted Power Supply. Brand New. Products Specifications: Designed For Telemedicine Operation. 3000va. Output Power Capacity-3000va, Mount: 3u Rack Mountable. Nominal Output Voltage -230v. Dimensions: 20-22 X 19-20 X 5-6 Inches. Warranty –at Least 6 Months Upon Delivery And Installation. * Unit 1 400,000.00 7 Medical Waste Shredder. Brand New. Product Specifications: 20hp Motor Slow-speed And High Torque Dual Shaft Shredders, 5/16″ Wide Cutters, With Bearing Protection And Cleaning Fitters. Features: Efficiently Shred Syringes, Face Masks, Boxed Medical Waste, Pill Bottles, Etc., Available With A Split Cutting Chamber That Allows For Two Different Shred Widths Within One Shredder, The Manner Of In Feed And Output Are Also Divided. Includes Training And Certification, Warranty 1 Year Upon Installation Unit 1 350,000.00 8 Portable Multi-parameter Analyzer Flow Water Quality Testing. Brand New. Product Specifications: Measures Water Quality Parameter For Ph/ec/ise/do/temp. Mv/orp/px/resistivity/tds/sal./do Saturation. Features: Portable Device, Color High Contrast Lcd Touchscreen, Data Storage1000 Sets For Each Parameter, Support For Usb Communication, Ip65 Waterproof, Includes All Necessary Accessories And Consumables, Includes Training And Certification For Use, Warranty For 1 Year Upon Installation Unit 1 200,000.00 9 Water Purification System. Brand New. Product Specifications: 6000 Gdp Reverse Osmosis Machine. Up To 1200 Containers Per Day. Double U.s. Membrane. 2 Tanks 1000ltrs. For Raw & Product Water. At Least 28 Stages Of Water Filtration. To Include Piping Line From Water Station To Specified Areas Within The Health Facility. To Include Necessary. Building/structure For The Water Station. Service Warranty 1 Year After Delivery And Installation. To Include Service And User Training. Including Consumables: 50 Gallons Round Containers, 50 Gallons Slim Containers, 1 Sack Industrial Salt. * Unit 1 350,000.00 10 Anesthesia Machine With Cardiac Monitor. Brand New. Product Specifications: Main Gas Supply -oxygen, Air. Pin Index Supply System: Oxygen, Air. Ventilatior: With At Least Six (6) Ventilation Modes. Machine Must Be Able To Ventilate Patient Using The Preset Settings Provided By The End-user Even Presence Of Driving Gas Is Temporarily Unavailable. Ventilator Must Be Enclosed With Metal Casing To Prevent Entry Of Foreign Items Including Fluid. Ceramic Type Of Inspiratory And Expiratory Valve. Ventilator Must Have High Pressure Valve That Ensures Release Of Excess Pressure When Required. Ventilator Must Be Functional When Machine Is Connected Either Through Direct Power Supply Or Back Up Battery. Breathing System: The Volume Of The Compact Breathing System And Co2 Absorber Must Be 1.7l Excluding Hoses And Breathing Bag. Volume Of Co2 Absorber Reusable Canister Must Be 1.5l. With Bypass Valve Located In Breathing System Allowing Continuous Machine Operation While Changing Co2 Absorber. With Fresh-gas Decoupling Valve That Prevents Direct Entry Of Pressure In The Patient Airway When Pressing The O2 Flush Button, Peep And Pressure Limitation. With Breathing System That Can Be Detached From The Main Unit Without Tools Required. Breathing System Should Be Separated From The Main Unit With Mounting That Can Be Positioned From Any Direction Without Moving The Entire Anesthesia Machine. With Ceramic Type Of Inspiratory And Expiratory Valve. With Sample Gas Return Port. With Pup Off Pressure Release Valve Located At The Apl Valve. With Moisture Reduction System. Hot Steam Sterilization Can Be Carried Out At 134 ° C (273.2 ° F). With Heated Breathing System. Anesthesia Gas Supply Module: Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. O2 Flush (bypass): At 87 Psi (6 Kpa X 100): Max. 75 L/min At 41 Psi (2.8 Kpa X 100): Min. 25 L/min. With Metering Valve And Dual Flow Tubes For Fresh-gas. With Integrated O2 Monitoring Located In The Screen. Vaporizer: With Two (2) Selectatec Vaporizer Mounting. With One (1) Unit Sevoflurane And One (1) Unit Isoflurane Vaporizer. Vaporizer Must Have No Cloth Component Which Allows Item To Be Functional Immediately Even Transporting It In An Upside Down Position. Oxygen Sensor: With Oxygen Sensor That Measures Percentage Of Oxygen. Flow Sensor: With Constant Temperature Hot-wire Anemometer Flow Sensor. Must Be Located Within The Anesthesia Unit Distal To The Patient Area. Flow Sensor Must Be Reusable. Auxillary Low Flow Oxygen: With Integrated Low Flow Oxygen Supply For Mask And Nasal Cannula Application. Writing Table/drawers/mounting: With At Least 3 Drawers As Storage For Other Accessories. With A Retractable Writing Table That Can Hold At Least 10kgs. Advanced And Safety Features: Functional Even The Battery Is Completely Discharged, All Pneumatic Functions Continue To Be Available (apl Valve, Breathing Pressure Gauge, Cylinder And Pipeline Gauges, Fresh Gas And Agent Delivery, And O2, Air, Flow Meters).manual Or Spontaneous Ventilation Can Be Maintained During Power Failure And Discharged Of Battery. In Case Of No Power And Totally Discharged Battery, Machine Must Be Shifted Automatically From Ventilator Mode To Manual Mode Without Any Switch Or Button Required. Start-up Time Must Be Less Than 15 Seconds. Power Input Data: Power Supply: Rating Non-configurable 100 To 240 Vac, 50/60 Hz, 145 Va. Battery Operation Time: Up To 2 Hours, Minimum Of 45 Minutes. Parameters: Minimum Tidal Volume (vt) Required: 20 Ml. Breathing Frequency (rate): 4 To 60 Bpm (1/min). Inspiratory Pressure: Peep + 5 To 65 Cmh2o. Inspiratory Flow (inspflow): 10 To 75 L/min In Volume And Pressure Control Modes, 10 To 85 L/min In Pressure Support And Simv/ps Modes. Inspiration Pause: 0 To 50 %. Simv Inspiratory Time: 0.3 - 4.0 Sec. Positive End Expiratory Pressure: (peep) 0 To 20 Cmh2o. Inspiration/expiration Ratio: (ti:te) 4:1 To 1:4. Pressure Limiting: 70 Cmh2o. Range Of Fresh Gas Flow Indicators: 0.0 To 12.0 L/min. Pressure Support Level: Peep + 3 To 20 Cmh2o. Min. Frequency For Apnoe-ventilation: (freq. Min.) 3 To 20 Bpm And “off”. Trigger Level: 2 To 15 L/min. Standard Accessories: One (1) Unit O2 Regulator, One (1) Unit Air Regulator, O2, Air Fittings And Hose Clamps, One (1) Unit Adult Anesthesia Circuit With 2l Bag. Biolight M12 Patient Monitor (basic Configuration). Technical Specification: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quick Volume And Brightness Adjustment. Support Quick Key, Able To Access Specific Functions Or Perform Operations Easily And Quickly. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Upgrade Lithium Battery, Battery Power Supply ≥480 Min. Ecg: Ecg Leads: 3/5 Leads, Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4,auto Gain, Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 10 To 300 Bpm, Ped/neo: 10 To 350 Bpm, Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American National Standard For Electronic Or Automated Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual, Auto, Stat, And Sequence. Sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have An Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin And/or Oral/rectal. If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours. Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function. Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews, Glasgow Coma Scale (gcs), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen. -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Accessories Included: 3/5 Lead Ecg Cable, 3/5 Lead Ecg Lead Wires, Adult Spo2 Sensor, Pediatric Spo2 Sensor, Temperature Probe Skin, Temperature Probe Oral/rectal, Nibp Cuff Adult, Nibp Cuff Pedia, Wall Mount / Trolley, One (1) Unit Pediatric Anesthesia Circuit With 1l Bag, Two (2) Units Power Adapter. Includes Avr Machine For Anesthesia Machine. Warranty -2 Years From Delivery, Installation, And Training/orientation. Unit 1 3,300,000.00 11 Cardiac Monitor With Capnograph. Brand New. Product Specifications: Display/waveforms: Screen Size Display: Not Less Than 12" Color Tft Screen. Screen Navigation: Touch Screen With Quickly Volume And Brightness Adjustment By Gestures Operate. Support Quick Key, Can Easily And Quickly Access Some Functions Or Perform Operations. No. Of Waveforms: At Least 7 Waveforms (using Standard Screen Display). Size Must Be: At Least 175mm X 320mm X262mm. With Auto Speech Recognition Module Implements The Voice Interaction With The Patient Monitor. Battery: Internal Battery Duration Must Be: ≥ At Least 240 (built In Battery). Can Up-grade Lithium Battery Power Supply ≥480min. Ecg: 5 Leads Display Sensitivity: ×0.25, ×0.5, ×1, ×2, ×4, Auto Gain. Must Have A Smart Lead Off Feature, Must Have An Ecg Calibration Feature, Must Have An St Segment Analysis And Monitoring. Heart Rate Range Must Be: Adu: 15 To 300 Bpm, Ped/neo: 10 To 350 Bpm. Must Have Two (2) Hr Averaging Method. With Ecg Multi-lead Synchronous Analysis Function, Analysis Of Multiple Cardiac Leads At The Same Time, Can Be Accurately Monitored In The Case Of Individual Lead Interference, With Intelligent Lead Fall Monitoring Function. St-segment Analysis Can Show The St Graphic, Which Help Indicates The St Alarm Status More Faster. Nibp: Nibp Measurements Must Comply With The American. National Standard For Electronic Or Automated. Sphygmomanometers: - (ansi/aami/iso 81060-2:2009, Ansi/aami. Sp10:2002) In Relation To Mean Error And Standard Deviation. Measurement Mode： Manual，auto, Stat, And Sequence，sequence Mode Could Support 5 Different Modes. Maximum Measuring Interval In Auto Mode Must. Must Have A Dual Overpressure Protection For Nibp. Temperature: Must Have Dual-channel Body Temperature Monitoring With Difference Display Measurements. Must Support Skin Or Oral If More Than One Temperature Probe Is Used, The Monitor Will Be Capable Of Calculating And Displaying A Delta Reading. Measuring Range: 0～50 ℃. Spo2: Must Be Used In Low Pi (perfusion Index). Resp: Detection Method: Respiratory Rate And Respiratory Waveform Must Be Monitored By Pulse Wave. Ibp: Support 2-channel Ibp Measurement Range: -50mmhg～+350mmhg. Types Of Measuring Blood Vessels: Arterial Pressure (art), Pulmonary Artery Pressure (pa), Central Venous Pressure (cvp), Right Atrial Pressure (rap), Left Atrial Pressure (lap), Intracranial Pressure (icp); Pulmonary Artery Wedge Pressure (pawp); Cerebral Perfusion Pressure (cpp). The Monitor Will Calculate The Ppv Based On Any Arterial Pressure Value Between Heartbeats. Etco2: Measuring Range: Etco 2 0 To 150 Mmhg. Fico: 3 To 50 Mmhg. Awrr: 0 To 150 Rpm (mainstream). Trends: Trend Data For All Parameters In Tabular And Graphic Formats Must Be: 180h. Stored Nibp Measurements Must Be: Up To 2400 Groups. Stored Alarm Events Must Be: 3000 Groups And Associated Waveform. Holographic Waveform Must Be 72 Hours Printer/recorder: Must Support 3-channel Recorder To Realize Thermal Printing; Support Network Printing Function Network Capability: The Ip Address Of Each Patient Monitor Shall Be User Configurable. The Upper/lower Limits Of Alarms Can Be Configured Via Networking From The Central. The Alarms At Bedside Can Be Paused Or Muted Via Networking From The Central. Features: -the Monitor Must Provide Electronic Early Warning Scor （ews）, Glasgow Coma Scale (gcs ), And Oxycrg Screen. -oxycrg Screen Shows Two Trend Curves And A Compression Waveform, Support To Review 48 Hours Trend Curve And Compression Waveform On The Oxycrg Review Screen -accessories Storage Box, Help Manage Accessories And Prevent Accessories Missing Or Broken Problem -all-in-one Monitoring Adult, Children, And Newborn Patients. -user Shall Be Able To Freeze The Waveforms On The Screen And Then Review It To Carefully Observe The Patient During This Time. -up To 4 Timers Shall Be Able To Be Configured On Monitor Display To Count Up Or Down The Required Time In Minute And Second With Audio Alarm To Alert User. - The Monitor Shall Provide Following Specific Working Modes: Standby, Intubation, Night, Privacy, And Demo Modes. Warranty -1 Year From Delivery And Installation. Unit 2 500,000.00 12 Ceasarian Instrument Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Scalpel Handle #3 With Measure 125mm, 1 Pc. Scalpel Handle #4 135mm, 1 Pc. Tc Metzenbaum Scissors Cvd 180mm, 1 Pc. Lexer Scissors Narr Str 165mm, 1 Pc. Mayo-lexer Scissors Cvd 165mm, 1 Pc. Lister Bandage Scissors Hvy 180mm, 1 Pc. Standard Forceps Serr 160mm, 1 Pc. Standard Tissue Forceps 1x2 160mm, 5 Pcs. Lorna Towel Clamp Non-perf 130mm, 6 Pcs. Halsted-mosquito Forceps Delstr125mm, 6 Pcs. Halsted-mosquito Forceps Del Cvd125mm, 2 Pcs. Kelly Forceps Del Str 140mm, 6 Pcs Moynihan Hemostatic Forceps, Crv, 150mm, 1 Pc. Tc Mayo-hegar Ndlholderhvyserr150mm, 1 Pc. Tc Hegar Needle Holder Hvy-serr 205mm, 1 Pc. Us-army Retrac.26x15/43x15-23x15/40x15, 1 Pc. Richardson-eastman Bt471rbt472r, 6 Pcs. Boys-allis Forceps 5x6 155mm, 2 Pcs. Kidney Tray Stainless Steel 250mm, 1 Pc. Bottom For 3/4 Container Height:135 Mm, 1 Pc. Primeline Pro 3/4 Lid Red, 1 Pc. 3/4 Size Perf Basket 406x253x76mm, 1 Pc. Silicone Basket Liner 3/4 Size, 1 Pc.mayo Safety Pin F/ring-hdl Inst 140mm, 1 Pc. Ident. Label Up To 13 Letters Red. Warranty –at Least Eat 1 Year From Delivery. Set 2 1,520,000.00 13 Chemical Analyzer. Brand New. Product Specifications: Combined Instrument With Two Complementary Technologies: Raman Spectroscopy And Colorimetric Detection Confirmatory Testing: One Instrument Capable Of Confirmatory Testing Using Two Technologies Including 1) Swgdrug Category A Technique For Presumptive Testing, And 2) Swgdrug Category C Technique For Confirmatory Testing Safety Of Features For Measuring Energetic Samples: Trace Detection Testing For Energetics Without Need For Opening The Container Nor Inducing Laser Light To The Sample, Scan Delay Timer: 15 Sec – 10 Min Sample Size: Able To Detect / Identify Samples From 1 Microgram Traces To Large Bulk Samples Materials Covered: Common Raman Substances, Explosives, Narcotics, Cwas, Tics, Tims, Precursors, Common Chemicals, Fluorescent Materials Not Covered By 785nm Raman: E.g. Colored Materials, Heroin, Colored Mdma Pills, Oils, Npss, Etc., Low Concentration Materials Not Covered By Any Raman Instruments: Lsd, Thc, Magic Mushrooms, Gunpowder, Etc. Raman Excitation Wavelength: 1064nm Minimizes Fluorescence Effects: Allows For Direct Analysis Of Colored/impure Chemicals Through Colored Packaging. Spectral Wavelength Range 200 – 2500 Cm-1 Portability Power: Small Handheld Device, Optimized For One Handed Operation. , 18.5cm-20cm (l) X 15cm-20cm (w) X 7.9cm-10cm (h), 3.65lbs-5lbs (1.65 Kg-2.27kg)., Quantity 2 Lithium Ion Rechargeable Batteries With Battery Life Of More Than 6 Hours Per Charge Per Battery. Cr123a Rechargable Batteries Can Be Used. Including Spare 2 Lithium-ion Battery. Ruggedness Decontamination: Us Mil-std 810g Designed Rugged., Ip 68 Rated For Use In Varying Environmental Conditions And For Complete Decontamination. Operational Temperature Range: Unit Can Be Operated In -20°c To +50°c Temperatures., Withstands Temperature Fluctuations And Humidity Fluctuations. Rapid Start-up Rapid Results: 60 Seconds From Power On To Analysis., Analysis Results In Less Than One Minute. Operational Mode Options: Raman Analysis And Colorimetric Analysis Oraman: • Auto-collect Adjusts Raman Settings Automatically Optimizes Use For Routine Operations • Advanced User Adjustable Raman Settings For Advanced Operators And Custom Library Build: • Laser Power Level 30-490 Mw Adjustable In 5 Mw Increments Exposure Time 5ms To 30s In Increments • Custom Applications Optimize Raman Analysis Parameters Specific To Material Type Ocolorimetrics: • Pouches Including Both Swipes And Colorimetric Chemicals In One Pouch • Pouches For Explosives And Narcotics • General Pouches For Detecting A Wide Range Of Explosives Or Narcotics • Specific Pouches For One Explosive/narcotic Substance Or Substance Group Easy Raman Operation: • Scans In Direct Contact And Through Translucent Plastic Or Glass Containers. • Universal Sample Holder For Analysis Of Samples In Varying Forms And Packaging. • Smartphone Like Touch-screen Interface Or Large Button Activation. • User Prompted Step-by-step Onscreen Analysis Activation. • Typically, 4 Button Presses To Receive Analysis Result. • Onboard System Status Monitoring And Calibration. Reduces Down-time And Necessity For Re-calibration At A Service Depot Analytical Performance: • Liquids, Solids, Powders, Pastes, Gels, Invisible Traces. • Colored Substances And Substances Found In Colored Translucent Packaging. These Types Of Substances Are Most Often Encountered In Real-world Samples. • Comparative Spectral Analysis Overlay Easily Performed Onboard. • User Adjustable Focus Ensures Analysis Of Material And Not The Packaging. • 4c Software Automatically Monitors Results For Combinations Of Precursors Used In Threat, Drug Manufacturing, And Other Recipes. Users Receive Onscreen Alert To Potential Threat Or Clandestine Drug Manufacturing Activity. Library: Raman: • Over 12,000 Substances. • Resq Library Includes The Latest Explosives, Precursors, Cwas, Tics/tims, Narcotics And Psychotropic Drugs, Steroids, Cutting Agents, Pharmaceuticals, Diluents And Pesticides. • Easily Expandable To Add Emerging Threats And Other Substances. • Fleet Management And Library Transfer To Units In The Field. • 4c Library With Explosive, Drug Manufacturing And Other Types Of Threat Manufacturing Recipes. • Library Updates Provided More Than Once A Year Colorimetrics: • General Narcotics Pouches: Multi Drug Test Incl. Fentanyl, Special Opiate Pouch, Cannabinoids • General Explosives Pouches: Chlorates/perchlorates, General Explosives • Specific Pouches: Cocaine, Ephedrine, Heroin, Ketamine, Lsd, Meth/mdma, Mushrooms, Opiates, Pcp, Thc, Ghb Evidence Documentation Traceability: • Onboard 5mp Camera Captures Image Of Sample And Surroundings, As Well As Colorimetric Swab. • Image(s) Stored Along With Analysis Results In Tamper-resistant File. All Analysis Results Are Traceable And Include Unique Date, Time And Serial Number Stamp. • Ability To Activate Password Protect Operator Log-in. Record Of User Associated Activity Stored Onboard And Cannot Be Deleted. Data Access And Transfer Reporting: • View Results In Real Time On Cell Phone Or Tablet, Computer Or Laptop (pc, Ios, Android, Linux) Via Wifi (can Be Disabled). • Exportable Data In Numerous File Formats. • Data Access And Transfer On Computer Or Laptop Via Usb And Wifi (can Be Disabled). • Easy Report Generation. Customer Support Package: • 24/7/ 365 Days Reachback Service For The Life Of The Unit. • Library Updates Provided For The Life Of The Unit. • Software Updates Provided For The Life Of The Unit. • Support: Online, Phone, Email, And In Some Cases Text Message For The Life Of The Unit Cql Complete Package: • Rugged Shipping Case With Custom Foam Insert. • Qty 2 Rechargeable Lithium-ion Batteries. • Cr123a Battery Cartridge (does Not Include Cr123a Batteries). • External Battery Charger. • Ac Power Supply. • Adjustable Base Adaptor. • Universal Sample Holder. • Certified Benzonitrile Performance Verification And Calibration Standard. • Flash Drive Containing User Manual And Supporting Documentation. • Quick Start Guide. • Usb-c To Usb-a Data Transfer Cable. • 1064nm Laser Test Card. • Including Hand Strap And Wrist Strap. . Training: • Comprehensive Onsite Training For An Unlimited Number Of Users. Add-on Accessories And Software: • Periscope Adaptor. • Vial Holder. • Bottle Adaptor. • Integrated Quickdetect Automated Colorimetrics • Detect Trace Quantities Of Non-visible Residues Left On Surfaces: • Explosives And Explosive Precursors • Narcotics Standard Requirements: • Bidder’s Certificate That Will Provide Manual In English Language (2 Copies Of Operator's/user's Manual And 2 Copies Of Service/technical And Maintenance Manual) Upon Delivery. • Brochure/sales Literature. Training Requirements: • Bidder’s Certificate That Will Conduct Free Technical Training And Product Demo For The End-user/s And In-house Biomed On Equipment Operation And On Maintenance Of Equipment. • After Sales Service: Bidder’s Certificate That Parts Shall Be Available At The Authorized Philippine Service Center/s For A Period Of Five (5) Years After The Warranty Period. • Certification From Local Distributor On The Availability Of Service Technicians And/or Biomedical Engineers In Case Of Equipment Breakdown. Preventive Maintenance - • Bidder’s Certificate Free Quarterly Preventive Maintenance During The Warranty Period With Preventive Maintenance Plan. Warranty Certificate: • Warranty Certificate Minimum Of Five (5) Years For Service And Three (3) Years For Parts. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. • Calibration: With Certificate Of Calibration Upon Delivery. The Bidder Must Be Iso 9001 And The Manufacturer Should Be Iso 13485 Certified Unit 1 6,900,000.00 14 Common Bile Duct Exploration Supplement Set. Brand New. Product Specifications: Made Of Heavy Duty Stainless Steel. Includes The Following Items: 1 Pc. Randall Kidney-stone Frcpsslt-cvd225mm, 1 Pc. Randall Kidney-stone Forceps Cvd225mm, 1 Pc. Randall Kidney-stone Frcpshvy-cvd225mm, 1 Pc. Randall Kidney-stone Frcps U-cvd225mm, 1 Pc. Bakes Bile-duct Dilator 1mm, Bakes Bile-duct Dilator 2mm, 1 Pc. Bakes Bile-duct Dilator 3mm, 1 Pc. Bakes Bile-duct Dilator 4mm, 1 Pc. Bakes Bile-duct Dilator 5mm, 1 Pc. Bakes Bile-duct Dilator 6mm, 1 Pc. Bakes Bile-duct Dilator 7mm, 1 Pc. Bakes Bile-duct Dilator 8mm, 1 Pc. Bakes Bile-duct Dilator 9mm, 1 Pc. Bakes Bile-duct Dilator 1mm, 1 Pc. Randall Kidney-stone Forcepscvd190mm, 1 Pc. Randall Kidney-stone Fcpshvy-cvd190mm, 1 Pc. Bottom For 1/2 Container Height:135mm, 1 Pc. Prime Line Pro 1/2 Lid Green, 1 Pc. 1/2 Size Perf Basket 243x253x76mm, 1 Pc. Identification Label Green. Set 1 590,000.00 15 Defibrillator. Brand New. Product Specifications: General Features: 7-10 Inch Lcd Display, Maximum Of 3 Waveforms. High Contrast Display Mode For Bright Environments. Ambulance-ready, Rugged Casting: Ip44, Impact Test Of 0.75m. Output Energy: 1-360j. Charge Times Of <3s T O200j, <7s To 360j. Auto-volt With Smart Charging. Lithium-ion Battery Supports To 6 Hours Monitoring/200 Shocks @360j/ 4.5 Hours Pacing, With Built-in Led Power Level Indicator. Lightweight At 4-5kg., Full Configuration, Main Unit. Automatically Switch Defibrillator Energy, Cpr Prompts, And Alarm Limits Depending On Patient Type. Display Ecg During Aed Mode. Ecg Recovery Within 2.5s Or Less. Contact Status Can Be Checked Through Paddle And Monitor, Impedance Value Can Be Checked In Monitor. Auto-testing Includes Maximum Energy Discharge Test. Parameters: 3/5 Lead Ecg, Pacer. Includes: Thermal Recorder, External Paddle Kits, Ecg Cable And Lead Wires, Ecg Electrode, Multifunction Electrode Pad. Printer Paper, Electrode Gel, Power Cord, Lithium-ion Battery. Unit 5 1,500,000.00 16 Dish Sterilizer. Brand New. Product Specifications: − High Light Led Display, − With Special Boiler Temperature Drainage Settings, − Washing (non-recycling) Parameters Can Be Set Free And With Control Memory Function, − Can Meet Different Washing Demand, − Self - Research Internal Water Softener, − Double Construction Design For Top Cover, − Power: 380v/50hz, − Basket Dimension : 500x500mm, − Washing Ability : At Least 60 Basket / H, − Rinse Water Quantity : 3 L/h, − Inlet Height :400-430mm, − Machine Dimension : 800-850x800-820x1450-1500mm, − Rated Power : 14.75kw, − Gross Weight : 140-150, − Net Weight : 100-110, − Packing Size : 890-900x900-910x1630-1700mm. Warranty Period- Within 1 Year Upon Delivery And Installation To Cover Parts (excluding Wearable Parts) And Service With Preventive Maintenance Every 6 Months Within 2 Years Period. Provides Orientation And Training To End-user Representative.* Unit 1 500,000.00 17 Electrocardiography Machine (ecg) Brand New. Product Specifications. High Resolution Lcd Touch Screen, 320-330x240-250vivid Waveform Display. 12 Leads Ecg Resolution Thermal Printer. Built-in Rechargeable Li-ion Battery, Ac/dc Power Supply. Anti-defibrillator And Pace Maker Detection. Complete Digital Filtering, Resisting Baseline Drift, Automatic Baseline Adjustment. Automatic Ecg Measurement And Interpretation. Large Patient Data Storage; 150 Cases, Equipped With Usb Port For Data Transfer. Three (30 Printing Formats (auto, Manual And Rhythm) Selectable. 1/2/3 Channel Ecg Waveform And Rhythm Leads Record Out. Lead Status Diagram Display. Unit 4 200,000.00 18 Electrosurgical Dessicator Machine. Brand New. Product Specifications: Use For Removal Of Lesions, Warts, Skin Tags, And Other Blemishes Easily With Minimally-invasive Treatment. For Superficial Treatments, Safe To Use Around The Eye And Nose Area. Includes Re-usable Pen And Tips. Unit Specifications: Depth:4-5 Inches, Width:8-9 Inches, Height:7-8 Inches, Weight:6-8 Pounds, Output Power -low At 0-20watts (1/10 Watt Increments Up To 10 Watts), High At 0-35 Watts, Bipolar: 0-35 Watts. Offers Hand-or-foot Activated Operation. Autoclavable, Reusable Hand Control Pencil With Power Adjustment Buttons. Pencils Are Designed With Non-spinning Hex Collar For Multi-positional Fall-safe Blade Locking. Equipped With Mobile Stand. Includes Consumables.warranty-6 Months From Delivery And Installation. Set 1 100,000.00 19 Fetal Maternal Monitoring System: Brand New. Product Specifications: Foldable Screen. Probe Rack And Wall Mounting Rack. Handle For Easy Carrying. User-friendly Gui With 3 Display Modes. Four (4) Optional Color Background. Capable Of 24 Hours Ctg Storage. Fast Print For Store Traces. "smart Notes" Annotation. Signals Overlap Verification. Real-time And Offline Data Transmission To Pc. 10-12 Inch Color Touch Screen. Excellent Algorithm. 12-crystal And 1 Mhz Water-proof Transducer For Accurate Detection. Configuration: Dual-fhr, Toco, Fm, Afm, Mecg, Nibp, Mspo2, Temp. Includes: 3 Each Belt, 1 Each Event Marker, 1 Bottle Ultrasound Gel, 1 Ea. Fhr Transducer, Purple, 1 Each Transducer, Yellow, 1 Each Spo2 Sensor, Adult, 1 Each Temperature Probe, Skin, 1 Each Toco Probe, 1 Each Nibp Cuff, Adult, 1 Each Nibp Tube, Adult. Unit 3 1,110,000.00 20 Infusion Pump. Brand New. Product Specifications: Mechanism: Peristaltic Pump, Operating Mode: Flow Rate Mode, Drip Rate Mode(optional), Preset Volume: 1-9999 Ml, Flow Rate Range: 1 – 600 Ml/h, Increment: 1, 10, 100 (ml/h), Accuracy: ± 5%, Kvo Rate: 1 Ml/h, Bolus Rate: 600 Ml/h, Drop Rate Range: 1 – 400 Drop/min With Optional Drip Sensor, Screen: 2.7 Inches B/w Lcd, Information: Flow Rate, Preset Volume, Accumulated Infusion Volume, Completion, Occlusion, Air Bubble, Bed No, Ac Power Indicator, Battery Capacity, Battery Charge Indicator, Iv Set, Etc., Status Indicator: Stop, Run, Bolus, Kvo, Alarm Type: Air Bubble, Finish, Occlusion, No Ac Power, Low Battery, Battery Empty, Reminder To Operate, Communication Error (err1), Operation Error (err2), Drops Error (err3), Handle Open (err4), Air Bubble Level: 1-3 Levels Adjustable, Universal Compatibility, Turn On/off, Occlusion Alarm Pressure Range: 3 Levels: 60kpa, 100kpa, 140kpa (±20kpa), Battery Type: Lithium Polymer, Battery Life: Up To 4 Hours Continuous Operation 25 Ml/h Flow Rate, With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual. Unit 4 320,000.00 21 Laboratory Oven. Brand New. Product Specifications: Working Temperature Range At Least 5 Above Ambient Temperature To +300 °c; Setting Accuracy Temperature Up To 99.9 °c: 0.1 / From 100 °c: 0.5; Setting Temperature Range +20 To +300°c; Temperature Sensor 1 Pt100 Sensor Din Class A In 4-wire-circuit. Control Cockpit Single Display. Adaptive Multifunctional Digital Pid-microprocessor Controller With High-definition Tft-colour Display; Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute To 99 Days; Adjustable Parameters: Temperature (celsius Or Fahrenheit), Air Flap Position, Programme Time; Ventilation: Natural Convection, Vent Connection With Restrictor Flap; Works Calibration Certificate : Calibration At +160°c; Door Fully Insulated Stainless Steel Door With 2-point Locking (compression Door Lock); Internals 1 Stainless Steel Grid(s), Electro Polished; Stainless Steel Interior; Interior Easy-to-clean Interior, Made Of Stainless Steel, Reinforced By Deep Drawn Ribbing With Integrated And Protected Large-area Heating On Four Sides; Volume 32 L; Dimensions W(a) X H(b) X D(c): 400 X 320 X 250 Mm; Max. Number Of Internals: 3; Max. Loading Of Chamber 60 Kg; Max. Loading Per Internal 20 Kg; With Free Power Back-up System, With Free Installation And Demonstration. Unit 1 130,000.00 22 Newborn Hearing Screening Test Equipment. Brand New. Product Specifications: • Capable Of Screening And Diagnostic Testing With Te And / Or Dpoae. • Fast Automatic Test With Pass / Refer And Graphical Test Result Display. • Direct Evaluation Via Value And Bar Diagram. • Up To 12 Frequencies Displayed Within The Device, Dp Up To 12 Khz. • 5 Dp / 2 Te Protocols With User Customizable Parameters (diagnostic Version). • High Noise Immunity For Operation In Normal Clinical Environment. • Lightweight, Small Ear Probe. • Environmentally Friendly Due To Long Life, Rechargeable Battery. • Bluetooth Communication To Optional Printer And Pc • Evaluation Of Results In Pc. Screener With At Least 4 Frequency Dpoae Testing Protocols. • Qualified Protocols Built Into The Device. • 4 Dpoae Test Frequencies Reported. • Integration To State Tracking Systems, Hi-track Or Oz. Diagnostic With Up To 12 Frequency Dpoae Testing Protocols. • 1.5 To 12 Khz Frequency Range With Up To 12 Test Frequencies Reported. • Customizable Test Protocols Teoae Available As An Upgradeable Option. Measurement Type: Distortion Product Otoacoustic Emissions (dpoae) Transient Evoked Otoacoustic Emissions (teoae). Frequency Range: Screener Version: Dpoae: 2.0 Khz To 5.0 Khz Teoae: 1.5 Khz To 4.0 Khz. Diagnostic Version: Dpoae: 1.5 Khz To 12.0 Khz Teoae: 0.7 Khz To 4.0 Khz. Stimulus Intensity Range: Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Microphone System Noise: -20 Db Spl @ 2 Khz (1 Hz Bandwidth)/ -13 Db Spl @ 1 Khz (1 Hz Bandwidth). Dimensions And Weight (unit): 2.5 To 3” W X 1.2 To 1.8” D X 5.5 To 6.5” H 6.2 To 6.8 Oz. Power Supply: Lithium-ion Rechargeable. Battery Life: 1000 Tests Per Charge, Minimum 15 Hours On-time. Connectors/ Communications: Integrated Usb Communication Capability For Battery Charging And Communication With Pc-based Database Programs Or An Optional Printer. Hdmi Connector For Connection To The Micro-probe. Integrated Bluetooth Class 2 + Edr With Spp. Protocol For Communication With Optional Printer. Standard Accessories: Micro-probe, Box Of Single Use Ear Tip And Ear Tip Remover, Package Of Probe Tubes, Micro-usb Power Supply For Charging Lithium Ion-battery, Pc Database Software With Manual, Micro B To A Usb Cable For Pc Communicator/charging, Protective Carrying Case, Data Management Tool That Provides The Ability To Transfer Patient. Oae Test Data From The Testing Device To A Pc For The Purposes Of Viewing, Archiving, Managing And Printing Oae Reports. Using The Database Also Gives You The Means To Create Letter Sized, Detailed Reports That Can Be Easily Filed Or Faxed. You Can Also Create A “paperless” Office By Saving The Test Results As A Pdf For Electronic Filing Or Email. Dpoae: 40 Db Spl To 70 Db Spl Teoae: 83 Db Spl Peak Equivalent (±3 Db). Includes Ups. Warranty –at Least 1 Year After Delivery And Installation. Unit 1 1,000,000.00 23 Operating Room Lights. Brand New. Product Specifications: Dual Head- Ceiling Type. Major Operating Room Light Multi-color. Merging Of Light Fields, Light Intensity Control. Comfortable Display Of Key-pad On Major Lighting Head. Back Light Key Pad Display. Depth And Merging Light Field Should Be Operated At The Sterilizable Handle. Cool Light Temperature Increasing In Head Area: 0.5 ºc. 360° Continuous Rotation Around All Major Joints. Anti-bacterial Coating Head. - Light Head Diameter: 66cm. Ideal Laminar Flow Ceiling System. With Endo Mode: Must Be Color Green Light. Main Light Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 160,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 19-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. - Adjusting The Shadow Activating Via The Touch Panel. - Maximum Of Four Groups Of Lenses Are Dimmed Simultaneously. Shadow Management System. Number Of Led’s: 99 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Laser Pointer On Head (main Light Head Only). Lf-index Leenemann: 26. Lf-index Oostlander: 28. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82 - 92watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 18.5 Kg. Protection Type Lamp Head: Iec60529. - Aluminum Housing. Satellite Head. Electronic Light Intensity Control At Lamp Head. - Light Intensity At 1 Meter Distance: 140,000 Lux. Colour Rendering Index Ra At Kelvin: 98 (for Better Quality Image Of Skin, Blood And Tissues). Colour Rendering Index R9 At Kelvin: 99 (for Better Quality Image Of Skin, Blood And Tissues). Focusable Light Field Size: 18-30 Cm. Colour Temperature: 3,750, 4,000, 4,250, 4,500, 4,750 K. Number Of Led’s: 69 On Lamp Head. Life Span Of Leds: > 60,000 H. Working Distance: 70-160 Cm. Light Intensity Control (standard): 5% - 100%. Outstanding Depth Illumination: 70, 100, 130 Cm. Input Voltage: Single Phase 110 ~ 230 Vac Free Volt. Total Power Consumption: 82-92 Watts. Adjustable Brakes At The Horizontal Arm. Light Head Weights: 17.9 Kg Minimum. - Aluminum Housing. Protection Type Lamp Head: Iec60529. Standard Accessories: - Sterilized Handle: 2 Pcs/ Lamp Head, - Ceiling Anchorage Ring With Screws, - Spring Arm, - Ceiling Cover, Including Installation Of Brackets To Embed Overhead Ceiling- User Manual, - Ups. Warranty Of Two (2) Years For Parts And Labor With Free Preventive Maintenance Every Quarter Within Warranty Period Five (5) Years Warranty For Led Bulb Only. Unit 1 2,500,000.00 24 Operating Room Table (motorized). Brand New. Product Specifications: Total Length: 2000-2100 Mm. Width Including Side Rails: 600-630 Mm. Mattress Width: 550-570 Mm. Total Weight: 200-210 Kg. Safe Working Load (swl): Up To 250 Kg. Height Adjustment Range: From 595 Up To 1005 Mm. Castors: Four Ø 120-125 Mm Central Locking Twin Castors. Head Section: -58° ... +37°, 135 Mm. Back Section: -10° ... +70°. Leg Section: -80° ... +10°. Lateral Tilt: 20° / 20°. Trendelenburg/anti-trendelenburg: 30° / 20°. Sliding Tabletop For C-arm Function: 300-320 Mm. Flex / Reflex: 220° / 120°. Electrical System: 24 Vdc, Battery Operated, 100 - 240 Vac, 50/60 Hz. Controls: Hand Control And Integrated Control Panel On The Column. Memory Positions: Four Programmable Positions. Visco-elastic Mattresses. Radio Lucent Tabletop For X-ray. Accessories For General Surgery: 1. Arm Rest, 2. Anesthesia Frame With Clamp And, 3. Attachment Clamp. Transport And Storage Conditions: Temperature 7 10° C + 50° C. Relative Humidity 10 %, 85 %. Air Pressure 700 Hpa, 1060 Hpa. Operating Condition: Temperature +10° C, + 40° C. Relative Humidity 30 %, 75 %. Air Pressure 700 Hpa 1060 Hpa. Side Rail Accessories: 25 X 10mm. Warranty-1 Year From Delivery And Installation. Certificate Of Parts Available In The Next 5 Years. Includes Training To End-user. Includes Product Manual. Unit 2 5,500,000.00 25 Radiant Warmer With Phototherapy Units. Brand New. Product Specifications: Fixed Height Radiant Warmer, Mounted On A Column. The Unit Is Supported By A T-shaped Sturdy And Stable Wheeled Base. Bases Is Provided With A Minimum Three (3) Anti-static Swivel Casters. At Least Two (2) Of The Casters Are Equipped With Brakes. The Base Is Equipped With A Side Handle/rail For Easy Positioning. The Design Of The Base Is Suitable To Be Fitted Over Standard Cradles, Cribs, And Bassinets. Overhead Radiant Heater At A Fixed Height Of 1.80-2.0m. Radiant Heating Is Achieved By Quartz/ceramic Elements, Placed In A Parabolic Reflector. The Radiator Is Equipped With A Safety Grid. The Unit Support Three (3) Modes: Pre-heating, Manual And Servo Mode. The Unit Allows For Instant Switching Been The Different Operating Modes. The Minimum Skin Temperature Setting Range Is 32°c To 37°c. The Resolution Of The Temperature Is: ± 0.5°c Or Better. In Manual And Pre-heating Modes Heating Settings Allow For A Range Of 0 – 100%. Led Spotlight(s) For Examination Are Integrated In The Overhead Radiant Heater, The Angle Of The Overhead Light Is Adjustable. Warm-up Time < 30 Min To 25°c. Power Requirements: 1 Ph, 100 - 240 Volts - 50/60 Hz 900 To 1300va (with Ups And Avr). Display Features: The Display Panel Is Integrated In The Column For Visualizing Working Parameters And Alarms. The Display Indicates: - The Current Active Mode: Pre-heating, Manual Or Servo, - The Current Heating Power In Percentages, - The Current Pre-set Temperature, - The Current Actual Skin Temperature, - The Current Air Temperature. The Unit Is Equipped With A Self-check Feature. Alarm And Safety Features: Alarms Are Audible And Visible. Alarms Indicating: - Sensor Disconnection Or Malfunction. - Power Failure. - Skin Temperature, After Stabilizing, Varying Beyond 0.5° To 1°c From Set-point. - 10 To 15 Minutes After Manual Mode Has Been Engaged An Audible Alarm Will Sound. In Addition, The Unit Will Either Reduce Or Cut The Power To The Heater. In Skin Mode, When The Temperature Exceeds 39°c, The Unit Will Cut The Power To The Heater. Supplied With: Instructions For Assembly, Use And Maintenance In English: 1 X Installed And 2 X Spare Reusable Skin Temperature Sensors, Including Connection Cable And Plug. 1 X Spare Quartz/ceramic Heating Element Or The Same With Installed Heating Element. 2 X Spare Examination Light Bulbs. 1 X Set Of Spare Fuses, If Applicable. Accessories: A Durable Light Weight Cradle/crib And Mattress. Oxygen Regulator Including A Pressure Gauge, Flow Meter, Humidifier Bottle And All Required Tubing. Integrated Weighing Scale. Electrically Operated, Slow Suction Unit Including A Vacuum Regulator, Vacuum Gauge And Autoclavable Collection Jar. Electrical Height Adjustment. T-piece Resuscitator. Integrated Phototherapy Unit. Led Phototherapy Unit 36cm: 620-2800μw/c㎡. Led Phototherapy Unit 50cm: 400-1620μw/c㎡. Estimated Life Span: Eight Years. Includes Avr. Unit 3 600,000.00 26 Refrigerator (biological). Brand New. Product Specifications: External Dimension: W = 700-750 Mm D = 730-750 Mm H = 2000-2100 Mm. Inside Dimension: Useful Space On Top W = 600-620 Mm D = 550-570 Mm H = 500-550 Mm. Useful Space At The Bottom W = 590-610 Mm D = 540-560 Mm H = 500-550 Mm. Capacity: 600 L Temperature Range: Top 2°c To 20°c Bottom 2°c To 20°c. Optional: Other Temperature Ranges. Housing Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. With 4 Feet, Height Adjustable. Optional: Set Of 4 Casters, 2 With Brakes. Interior Space Inner Case Of Galvanized Sheet Steel With High Quality White Coating, Antibacterial Coated. Cleaning Friendly By Rounded Corners, Slippery Surface In The Interior, Meets Highest Hygiene Requirements Insulation High Density Foamed-in-place Polyurethane, With A Thickness Of 60 Mm. Cfc-free. Circulation Air Cooling For Rapid And Uniform Temperature Control, Reducing Temperature Gradients To A Minimum. When The Door Is ""open"" The Circulating Fan Is Switched Off Automatically By A Micro Switch In Order To Prevent Warmer Ambient Air Being Drawn In. Door 2 Pcs. Three-layer Thermally Insulating Glass Door (arranged On Above The Other), Supplied As Standard With Right Hand Hinge, Also Available With Left Hand Hinge At No Extra Cost. Grease Resistant Magnetic Seal. Optional: With Door Lock. Interior Fittings 4 Pcs. Grating-type Shelves (dim.: 530x550 Mm), White Coated. Interior Lighting With Automatic On/off Micro Switch. Optional: Stainless Steel Shelves Or Stainless-steel Drawer Compartments, With 3 Lengthwise Dividers With Telescopic-type Guides On Rollers With Stops, Drawer Dimensions: 500x480x77 Mm (wxdxh) Usable With Between The Lengthwise Dividers: 106 Mm (lengthwise Dividers Easily Removable). Working Range 1 From 2°c To 20°c (assuming The Ambient Temperature Is Approximately 4°c Above The Set Point). Temperature Accuracy +/- 1,8°c After Stabilization (with 50% Of Loading). Acoustics Signal When The Set Value Is Undercut Or Exceeded Potential-free Connection Socket For Extern Alarm Refrigerating Unit 2 Pcs. Fully Hermetically Sealed, Forced Ventilation, Fitted On Vibration – Absorbing Mounts (ambient Temperature Max. 32°c), Low Noise (48dba/1m), Energy Saving Compressor With High Quality Vaporization System. Refrigerant: R 290 Or Equivalent Defrost Automatically With Thermal And Time Limit. Condensate Evaporation In Heated Tray. During The Defrost Period, The Temperature Inside The Cabinet (only The Air Temperature – Not The Stored Goods) Will Arise For A Short Time. Electrical Date: Power Supply220-230 V/50 Hz/single Phase Optional: 60 Hz. Power Input 2x 0,20 Kw. Fuse 16a. Power Cable: 2x 1,5 M. Packing Details (palletized) Dimensions: Approx. 85x98x224 Cm. Net Weight: 150-170 Kg. Gross Weight: 180-200 Kg. Include Avr. Unit 1 100,000.00 27 Rigid Video Procto-sigmoidoscope. Brand New. Product Specifications: Plastic Obturator. Video Camera. Stainless Steel Tube. Handle Of Polyacetal (delrin), Usb Male Connector. Analogue To Digital Converter Nozzle For Gas. Instrumentation Channel. Silicone Washer. Includes Universal Fiber Optic Light Source Machine And Tube Connector From The Proctoscope To The Light Source Machine. Warranty -6 Months From Delivery And Installation. Set 1 50,000.00 28 Stretcher, Transport Type. Brand New. Product Specifications: Hydraulic Stretcher. Numbers Of Function: Five-function. Certification: Ce, Fda, Iso13485. Size: 2000-2100 Mm (l)*770-800mm (w)*600-610/900-920mm (h). Height:600mm-930mm. Lowest Position-floor To Platform-580mm. Highest Position-floor To Platform-905mm. Side Rail Height Above Mattress Platform-340 To 360mm. Maximum Back Rest-0-80 Degrees. Maximum Knee Rest-0-30 Degrees. Maximum Trendelenburg Reverse Tr-0-16 Degrees. Mattress Size -1850-1880 X 650-670 X 80-90mm. Loading Capacity -up To 200 Kg. Side Rails: Collapsible Aluminum Alloy Side Rails. Bed Platform: X-ray Transparent. Specification: Ce, Fda, Iso. Other Features: 1. Central Brake System: Equipped With Four Brake Pedals On All Sides Of The Bed Make The Brakes At The Optimal Position Effectively. 2. Multi-function Instrument Support: The Instrument Support Can Put The Monitor And Can Also Be Used As A Headboard To Prevent Accidental Slippage Of The Patient. 3. Push Handle: Reducing The Workload And Preventing The Injuries. 4. High Quality Mattress: The European Standard Waterproof Cloth With The Smooth Surface Of The Mattress, Easy To Clean And Not Misplaced. 5. Large Diameter Wheel: Using The Imported 8-inch Silent Caster Make It Flexible And Durable. 6. The Fifth Wheel: The Fifth Wheel Can Provide A Smaller Radius Of Gyration. The Telescopic Collapse Design Can Slide Smoothly Even On The Rough Surface Or Obstacles Such As The Elevator Sill, Reducing Effectively The Damage Caused By Transport To Patients. 7. Plastic Coated Side Rails: The Side Rails With Stainless Steel Column Guardrail Covers Almost Entire Length Of Bed. 8. High-strength Carbon Steel Structure And Spray Procedure: The High Quality Carbon Steel And Robot Welding Guarantee The Mechanical Strength. The Spray Surface Treatment Is Easy To Clean And Guarantees A Longer Life. 9. Rapid Lifting Hydraulics: The Imported Dual-pressure Lifting System Can Be Used To Quickly Lift The Bed Or The Push Handle For 2 Seconds In An Emergency, And The Bed Will Automatically Locate The Height To Form A Special Body Position Of The Patient. 10. X-ray Imaging: Equipped With X-ray Material Bed Surface And X Ray Cassette Holder, The Whole Body Can Be X-rayed. 11. With Oxygen Cylinder Holder. Warranty -1 Year From Delivery And Installation. Unit 18 5,400,000.00 29 Suction Machine. (heavy Duty). Brand New. Product Specifications: Floor, Standing Type. Oil-less Piston Suction Motor. Double Anti-overflow Protection (mechanical Float And Electronic Sensor). Flow Rate: 40-50 Liter Per Minute. Water Displacement. Vacuum -700-800mmhg. Includes 2x3 Liters Polycarbonate Collection Jar. Attach/detach Abs Plastic Cover Jar. Anti-bacterial And Hydrophobic Filter. Patented Anti-vibration System. Dimensions: 300-400mm X 380-420mm X 800-850mm (lxwxh). Weight -15-25 Kg. Equipped With Foot Switch. Power -250w. Power Requirement -ac 200, 50-60hz. Silicone Hose. Operation And Service Manual Included. Warranty Of 6 Months From Delivery And Installation. Includes Orientation And Training Of End-user Staff. Unit 2 600,000.00 30 Syringe Pump. Brand New. Product Specifications: With Delivery And Installation, Provision Of Trainings Of Staff With Certificates, And Manual.  Applicable Syringes (universal Compatibility To Various Brands): 10ml, 20ml, 30ml, 50ml/60ml, Accuracy: ±2% (mechanical ±1%).  Flow Rate: 10ml: 0.1 Ml/h -300ml/h, 20ml: 0.1 Ml/h -600ml/h, 30ml: 0.1 Ml/h -900ml/h, 50ml: 0.1 Ml/h -1500ml/h.  Bolus Rate: 10ml: 100-300ml/h (default 300ml), 20ml: 100-600ml/h (default 600ml), 30ml: 100-900ml/h (default 900ml), 50ml: 100-1500ml/h (default 1500ml).  Purge Rate: 10ml: 300ml, 20ml: 600ml, 30ml: 900ml, 50 Ml: 1500ml.  Volume To Be Infused: 0.1ml~1000ml.  Injection Increment: 0.1ml.  Infusion Mode: Rate Mode, Time Mode.  Time Mode: Volume Limit: 0.1~999.9ml. Pre-set Time: 1min To 99h99min. Remaining Time: **h **min.  Occlusion Pressure: 3 Adjustable Occlusion Pressure Settings: Low, Middle And High.  Alarm Function: Infusion Completion, Near Completion, Empty, Occlusion, Low Battery, Syringe Disengaged, Incorrect Installation Of Syringe Plunger, No Ac Power Supply, Low Battery, Battery Exhausted, Malfunction Etc.  Battery: Rechargeable Lithium Polymer Battery, 7.4v, 2100mah, Can Operate For More Than 3 Hours After Fully Charged At 25ml/h. Unit 5 300,000.00 Total 34,665,000.00 Note: Winning Bidder Shall Conduct Product Demonstration/end-user’s Training Of The Actual Unit And Issue Training Certificate To The End-user And Medical Equipment Technician Of Wvsgh. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids, Award For This Contract Should Have Been Awarded By A Hospital Or Health Facility And Not By Another Supplier, Except For Line Items With Asterisk (*) Which Have Been Awarded By A Non-health Facility. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents December 12, 2024 At 8:00 Am To 4:00 Pm And Up To Before 9:00 Am Of January 7, 2025, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference December 20, 2024 (thursday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids January 7, 2025 (tuesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of: Php 25,000.00 Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of January 7, 2025. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban/jessie H. Jarbadan Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Bac Chairperson