Electrical Tenders

Purchaser Name: Turkish Electrical Communications A.S. General Office (TEIAS) 6th Regional Directorate KUTAHYA | Due to Itis, Eskişehir Operation and Group Chief Engineering Personnel Service Transportation Work for 23 Months (03/02/2025 - 31/12/2026)

Purchaser Name: Turkish Electrical Communications A.S. | 1 Unit 154 Kv (~1km) Double Circuit 1272 Mcm Conductor Kandil Hes – Elbistan B Tes Ei̇h (dr No: Between 22-29) Displacement Facility Construction Work

Purchaser Name: Turkish Electrical Communications A.S. | Purchase of 13 items of protective summer and winter clothing for our workers working within the scope of the Labor Law No. 4857 within our Regional Directorate.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Energy Storage Management Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Energy Storage Management Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements energy Storage Management Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Terrence Shearer, Terrence.d.shearer.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Energy Storage Management Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Energy Storage Management Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: Document Type: presolicitation Notice Solicitation No. 75n95024r00124project Title: nih Neurobiobank Brain And Tissue Repositoryclassification Code: a¿research & Developmentnaics Code: 541714 ¿ Research And Development In Biotechnology (except Nanobiotechnology) Descriptionthe National Institute Of Mental Health (nimh), The Eunice Kennedy Shriver National Institute Of Child Health And Human Development (nichd), The National Institute Of Neurological Diseases And Stroke (ninds), The National Institute On Aging (nia) And The Blueprint For Neuroscience (https://neuroscienceblueprint.nih.gov), National Institutes Of Health (nih) Plan To Solicit Proposals Under Full And Open Competition Procedures From Offerors Having The Capability To Provide Services That Will Increase The Availability Of Post-mortem Human Brain Tissue For Research. The Nih Intends To Support Multiple Awardees/collection Sites In Order To Provide Sufficient Critical Resources For Research On Neurological, Psychiatric, And Neurodevelopmental Disorders. The Objective Is To Make Awards To Offerors That Can Acquire At Least 70 Donors Per Year (with The Possibility Of Up To 150 Unique Human Donors Per Year For A Range Of 350 ¿ 1,000 By The End Of The Five-year Contract Period, If All Option Periods Are Exercised.qualified Offerors Will Be Required To Acquire Brains From Deceased Donors With Diverse Neurodevelopmental, Neurological, And Neuropsychiatric Disorders, As Well As Individuals With No Known Brain Disorders. Donors Should Be Aged Across The Life Span, And Of Diverse Race And Ethnicity. Offerors Shall Document And Maintain A Current Inventory By Entering Data On The Donors And Tissue Samples Into A Third-party Interactive Website (section 508 Compliant) Herein Referred To As The Nih Neurobiobank Portal,and Participate In The Sharing Of Tissue(s) And Associated Data Under The Nih Neurobiobank Guidelines. The Nih Neurobiobank Portal Will Facilitate Tissue Requests And Coordinate The Distribution From The Various Brain Banks To Qualified Scientific Investigators Who Are Dedicated To The Improved Understanding, Treatment, And Prevention Of These Disorders; (see Nimh, Ninds, Nichd, And Nia For Areas Of Disease Focus). Various Types Of Deliverables Will Be Required Including A Collection Of Brain Tissue And Biospecimens, Data, And Progress Reports. The Anticipated Contracts Will Include Standard Operating Procedures (sops) And Protocols To Ensure Uniformity Among Sites When Possible, And Quality Assurance/quality Control Requirements For Prospective Evaluation Of Short- And Long-term Specimen Integrity, Viability And Function.qualified Offerors Should Have The Ability To:1. provide An Infrastructure To Actively Acquire, Receive, Characterize, Preserve, Store, Catalog, And Distribute Brain Tissue And Other Biospecimens To Qualified Investigators. Tissue Shall Be Collected In Accordance With All Applicable State And Local Laws And Federal Regulations. Tissue Acquired Will Be Focused On The Postmortem Brain, Other Nervous System Tissues From Individuals With Neurodevelopmental, Neurological, And Neuropsychiatric Disorders And Unaffected Controls. Other Tissues Including Pre-mortem Biopsies And Surgical Resections Are Also Considered Valuable Resources For Research And Will Be Collected On An Ad Hoc Basis.2. acquire Autopsy Reports, Medical Records, And Other Clinical Data From The Next Of Kin Of Acquired Donors. Using These Information Sources As Well As Other Validated Methods Including A Comprehensive Neuropathological Evaluation And Post-mortem Interviews (when Appropriate), Determine To A High-level Of Confidence, The Clinical Brain Diagnoses Of The Donor At The Time Of Death.3. utilize Standard Forms For Data Collection (with Web-based Entry And Searchable Data Collection) And Compatible Computerized Databases. The Contractor Shall Report Data And An Accurate Index Of Their Brain And Tissue Inventory To The Nih Neurobiobank Portal, A Third-party Interactive Website (section 508 Compliant), On A Quarterly Basis.4. provide Sufficient Capacity To Store And Maintain Biologic Specimens Derived From 350 ¿ 1,000 Unique Human Donors By The End Of The Five-year Contract Period, If All Options Are Exercised For Non-frozen Material Including Fixed Tissues Will Be Considered When Evaluation Capacity To Perform These Services. The Contractor Should Provide A Climate-controlled Facility With The Capacity To Maintain Room Temperatures Such That Freezers Can Function Normally When All Equipment Is Operating, With Sufficient Back-up Power To Maintain Normal Operation In A Power Failure. The Contractor Shall Also Provide Enough Back-up Freezer Space To Accommodate The Failure Of At Least Two Freezers. Complete Transfer Of The Contents Of A Freezer Shall Occur Within Two (2) Hours Of An Initial Freezer Failure. Adequate On-site Back-up Power To Handle Complete Electrical Power Failure Must Be Provided.5. establish Mechanisms For Registering Potential Donors For The Nih Neurobiobank And Engage In Outreach For Brain Donation To Appropriate Disease Advocacy Organizations.6. participate In Bi-monthly Nih Neurobiobank Directors Conference Calls And An Annual In-person Meeting Designed To Provide Updates And Feedback On Ways To Improve Efficiency, Quality, And Usability.other Important Considerations:1. protocols And Standards At A Minimum Should Meet Those Set Forth In The Nci Best Practices For Biospecimen Resources Established By The Office Of Biorepository And Biospecimen Research.2. section 508 Compliance Is Applicable For All Systems Housing Data.3. compliance With The Nih/office For Human Research Protections (ohrp) Guidelines And 45 Cfr Part 46, To Ensure That The Bank Has Undergone Annual Review By The Institutional Review Board (irb).4. information Technology (it) Security That Is Compliant With The Federal Information Security Modernization Act Of 2014 (fisma) To Ensure Security Of All Data Generated Over The Life Of The Contract.5. appropriate Shipping Licenses And Permits From Local, State, Federal And International Authorities For The Safe Import, Storage And Distribution Of Biological Specimens, According To Current Regulatory Guidelines, Will Be Required, As Applicable.6. procedures And Protocols For Safe Handling Of Potentially Hazardous And Infectious Materials Will Be Required.7. each Successful Offeror Must Have A Federal Wide Assurance (fwa) Currently Accepted And Approved By The Department Of Health And Human Services¿ (hhs) Office For Human Research Protections (ohrp) Or Demonstrate That It Has Submitted To Ohrp For Issuance Of An Assurance. Each Successful Offeror Must Comply With The Requirements In The Hhs Protection Of Human Subjects Regulations At 45 Cfr 46.8. nimh Anticipates One Or More Award(s) Of A Single, Cost Reimbursement, Level Of Effort Type Contract For One 12-month Base Period And Four 12-month Option Periods. This Award Is A Competitive Renewal Of Contract Nos. 75n95019c00045, 75n95019c00046, 75n95019c00047, 75n95019c00048, 75n95019c00049, And 75n95019c00050 Titled ¿the Nih Neurobiobank.¿9. the Government Does Not Intend To Use Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For These Services. However, Interested Parties May Identify To The Contracting Officer Their Interest And Capability To Satisfy The Government¿s Requirements With A Commercial Item Within Fifteen (15) Days Of This Notice. 10. in Accordance With Far 5.203, The Solicitation Is Expected To Be Released After At Least Fifteen (15) Days Of This Posting And Will Be Available Electronically At Beta.sam.gov. All Information Required For Submission Of A Proposal Will Be Contained In Or Accessible Through The Solicitation. The Solicitation Will Also Provide Instructions For Submission Of Any Questions.11. responses To The Solicitation Will Be Due, At A Minimum, Thirty (30) Days From The Release Date. All Responsible Sources May Submit A Proposal Which Will Be Considered By The Agency. This Notice Does Not Commit The Government To Award A Contract. No Collect Calls Will Be Accepted. No Facsimile Transmissions Will Be Accepted.12. for This Solicitation, Proposals Will Be Required To Be Submitted Online Via The Electronic Contract Proposal Submission (ecps) Website. For Directions On Using Ecps, Go To The Website Https://ecps.nih.gov And Then Click On ¿how To Submit.¿

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Tachometer Frequency Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Tachometer Frequency Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Tachometer Frequency Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Tachometer Frequency Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Respsones And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog To Digital Voltage Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog To Digital Voltage Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog To Digital Voltage Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog To Digital Voltage Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Synchro Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Synchro Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Synchro Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Synchro Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Synopsis Is A Pre-solicitation Notice From The U.s. Department Of Commerce, National Oceanic And Atmospheric Administration (noaa), Corporate Services Acquisition Division (csad), Facilities Support Branch notice Id: 1305m4-24-r-0071 this Is A Pre-solicitation Notice Only. project Title: Manchester Campus Addition Construction At The Manchester Research Station In Port Orchard, Washington location: Noaa Nw Fisheries Research Station 7305 E. Beach Drive Port Orchard, Wa 98366 classification And General Information: this Requirement Will Be Issued As A Full And Open Competition the North American Industry Classification System (naics) Code Associated With This Procurement Is 236220, Commercial And Institutional Building Construction. The Small Business Administration Standard Of $45 Million Dollars In Annual Receipts Averaged Over A Business’s Latest Three (3) Complete Fiscal Years Or (except In The Business Loan And Disaster Loan Programs) Five (5) Complete Fiscal Years To Determine The Average Annual Receipts. If A Business Hasn’t Been In Business For Five (5) Years, Multiply Its Average Weekly Revenue By 52 To Determine Its Average Annual Receipts. this Contract Will Be Full And Open, And The Contractor Shall Be Selected By Federal Acquisition Regulation (far) Part 15.1 Source Selection Procedures. This Procurement Will Be Competitive, Utilizing The Tradeoff Process Approach Under The Best Value Continuum (far 15.101). This Process Permits Tradeoffs Among Cost Or Price And Technical Factors. It Allows The Government To Accept Other Than The Lowest Priced Offeror Or Different Than The Highest Technically Rated Offeror. All Evaluation Factors Other Than Cost Or Price, When Combined, Are Significantly More Important Than Cost Or Price. The Best Value Method Is Essential To Evaluate And Compare Costs And Prices To Select The Most Advantageous Offer. The Planned Project Delivery Method Will Result In A Firm- Fixed-price Contract For Construction Services. background Overview: the National Oceanic And Atmospheric Administration (noaa) Has A Requirement For A Campus Addition Construction Project For The Northwest Fisheries Science Center (nwfsc) At The Manchester Research Station (mrs), 7305 Beach Drive East, Manchester, Wa 98353. This Project Constitutes A Ground Up, New Construction Project Of Approximately 24,000 Gsf To Be Located On The Existing Mrs Campus West Of Seattle, Washington, North Of The Town Of Manchester. the National Marine Fisheries Service (nmfs) Northwest Fisheries Science Center Mission Supports The Conservation And Management Of Living Marine Resources And Their Habitats In The Northeast Pacific Ocean. Nmfs Research Assists Resource Managers In Making Sound Decisions That Build Sustainable Fisheries, Recover Endangered And Threatened Species, Sustain Healthy Ecosystems, And Expand Domestic Seafood Production Through Sustainable Marine Aquaculture. project Description - Construction: Generally Described As Follows But Not Limited To: a New, Energy Efficient Facility That Will Include Modern Laboratory Facilities For Data Collection And Research That Focuses On Understanding The Life Cycle Of Marine Species And The Impacts Of Ecosystem Stressors On Anadromous And Marine Fish And Invertebrates. 2. The Facility May Include But Is Not Limited To The Following Program Areas And Facilities: A. Recirculating Aquatic System (fresh And Saltwater) B. Wet Labs C. Dry Labs D. Facility Storage E. Gas Generation F. Freezer Storage G. Office Spaces H. Hatcheries I. Electrical, Mechanical And Communication Spaces J. Site Work Including Utilities, Sidewalks, Parking, Roadways, And Landscaping this Is A New Requirement For Construction Services For The Manchester Campus Addition From A Traditional Design-bid-build Delivery. The Solicitation And Resulting Contract Will Provide The 100% Design Drawings And Specifications For The Manchester Campus Addition Construction Project In Section J. site Visit Information: offerors Will Have The Opportunity To Visit The Site Before Submission Of Their Technical And Price Proposals. The Site Visit Details, To Be Held At The Manchester Research Station (mrs) Facility, Will Be Outlined In The Solicitation Package. Currently The Site Visit Is Projected To Be Held On Or About February 21, 2025. If Applicable, All Required Site Access Information As Outlined In Section J. Must Be Submitted In Accordance With The Solicitation Requirements For Site Visit Entry. project Period Of Performance And Budget: this Project Shall Be Performed By An Experienced General Construction Contractor That Has Performed Similar Work. The Estimated Performance Period Is 700 Calendar Days, Including Base + Optional Clins From Issuance Of Notice To Proceed. Prospective Offerors Are Advised To Thoroughly Review The Entire Solicitation (sf1442 Form) To Gain A Clear Understanding Of The Project's Budget As Specified By The Individual Contract Line Item Numbers (clins). system For Award Management (sam): all Contractors Interested In This Project And Doing Business With The Federal Government Must Be Registered With The System For Award Management (sam): Https://www.sam.gov issuance Of Solicitation With Requirements Information: noaa Anticipates Publishing The Solicitation And Supporting Documents Package On Or About Tuesday, February 4, 2025, With The Offer/receipt Date/time: Friday, April 4, 2025, 12:00 Pm Eastern Time (et) For Phase I And Tuesday, June 17, 2025, 12:00 Pm Et For Phase Ii. The Solicitation Will Be Available Electronically At The S.a.m. Website: Www.sam.gov. No Paper Copies, Faxes, Or Emails Will Be Available. Please Register As An Interested Source To Be Notified Of Amendments, Clarifications, Or Other Changes. Entities (even Those Registered As A Source) Are Responsible For Checking The Sam.gov Website Frequently To Ensure They Have All Available Information. in The Interim The Government Has Elected To Provide A Draft Copy Of The Complete Solicitation On Or About December 10, 2024 (the Draft 100% Design And Specifications Only Are Available As Of November 4, 2024). Once Uploaded, We Encourage Interested Parties To Review These Draft Documents. We Again Want To Emphasize That These Documents Are In “draft” Form And Are Subject To Change Upon Final Solicitation Issuance. Please Note, Referenced Attachments Are Included With This Release. Any Questions Regarding Gaining Access To The Materials Shall Be Directed To Mr. Scott Gebhardt At Scott.gebhardt@noaa.gov And Ms. Ronette C. Mcbean-felder At Ronette.mcbean-felder@noaa.gov. as A Reminder, This Draft Release Is Not A Solicitation For Government Services. Noaa Does Not Anticipate Posting Questions And Responses Or Amendments To This Draft As Would Occur With A Formal Rfp. No Awards Will Be Made From This Draft Release And Any Voluntary Informational Responses Submitted May Be Accomplished Via The Campus Addition Draft Solicitation Information Link. Keeping In Mind, Direct Responses To Informational Queries Or Clarifications May Not Be Made, But At The Government’s Discretion May Be Included In The Resulting Final Solicitation. Respondents Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Draft Solicitation; All Costs Associated With Responding To This Draft Solicitation Will Be Solely At The Respondent’s Expense. prospective Contractors Must Limit The Dissemination Of This Information To Authorized Users Only. Dissemination Of Information Shall Only Be Made Upon Determining That The Recipient Is Authorized To Receive It. The Criterion For Deciding Authorization Is Need-to-know. Those Who Need To Know Are Those Who Are Specifically Granted Access For The Conduct Of Business On Behalf Of Or With Noaa. This Authority Includes All Persons Or Firms Necessary To Do Work At The Request Of The Government, Such As Architects And Engineers, Consultants, Contractors, Subcontractors, Suppliers, And Others That The Prospective Contractor Deems Necessary To Submit An Offer/bid Or To Complete The Work Or Contract, As Well As Maintenance And Repair Contractors And Equipment Service Contractors.

Details: Description The City Of Bayawan, Through Its Bids And Awards Committee (bac), Invites Suppliers / Manufacturers /distributors / Contractors To Bid For The Hereunder Projects: Item No.qtyunitarticlesbrandunitpricetotallot No. Iaggregates13cu.m.sand, Washed Mixing/screened Non Washed24cu.m.crushed Gravel, (screened & Washed), Max. Size 38mm Dialot No. Iibar And Rebar390lengthdeformed Bars, · 10mm X 6m420lengthangle Bar, 3mm X 38mm X 38mm X 6m Lot No. Iiibatteries, Cells And Accessories530unitlithium Ion Battery, · Capacity : 100 Ah· Dc Output Voltage: 12 V· Chemistry: Lithium Ion· Enclosure: Abs Plastic· Max Charge Voltage: 14.6±0.1v· Life Cycles :3,000 @ 80% Dod· Water Rating: Water Resistant· Warranty: 1 Yearlot No. Ivcarpentry Tools And Supplies65packcutting Disc, 4" (100mm), For Metal, Slim, 50pcs/pack710piecehacksaw Blade, · 24 Tpi· 12”x1/2”860piecebolt With Nut, · 13mm X 8”· With Nut And Washer92kilotie Wire, #18 G.i Wire101sheetphenolic Board, 16mm X 4' X 8 Lot No. Vcement And Additives1130bagcement, · Pozzolan· 40 Kg/baglot No. Viflood Rescue Equipment Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal1230unitmppt Solar Charge Controller, · System Nominal Voltage 12 /24/36/48vdc Auto· Battery Type Lithium / Lead-acid· Charging Technology Mppt· Maximum Charging Current 40a· Maximum Discharge Current 40a· Max Pv Input Power 130w12v/260w 24v· Max.pv Open Circuit Voltage 100v Lot No. Viiinformation And Communication Technology Equipment, Devices And Accessories1319unitwifi Radio, Mechanical· Dimensions 512 X 385.8 X 258.3 Mm (20.2 X 15.2 X 10.2")· Enclosure Material Aluminum, Plastic· Mounting Pole Mount (kit Included)· Wind Loading 550 N At 200 Km/h (123.6 Lbf At 125 Mph)hardware· Networking Interface (1) Gbe Rj45 Port· Power Supply 24v, 0.3a Gigabit Poe Adapter (included)· Max. Power Consumption 7w· Leds Power, Ethernet· Operating Frequency (mhz) 5150-5875 Mhz143boxrj-45 Connector, 3 Box· 100 Pcs/box· Pass Thru155boxutp Cable, Outdoor, Cat6, 23 Awg, Inner Jacket: Pvc, Outer Jacket: Pe, Insulation: Polythelene, 305 Meters/box1615unitwifi Adapter With Rs485 Interface, 15 Units· Hf22111720piecesolar Panel, · Maximum Power/pmax(w)：120w· Open-circuit Voltage/voc(v)：22.32· Max Power Voltage/vmp(v)：18· Max Power Current/lmp(a)：6.67· Weight(kg)：7.6· Dimension(mm)：1126*666*35· Max System Voltage(v)：600lot No. Viiimeasuring/observing/testing Devices Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committeebid No.:itb-24-318date.:11.dec.2024geps Publication:geps December 17, 2024newspaper:none Item No.qtyunitarticlesbrandunitpricetotal185unitwater Level Sensor, · Certification: Ce· Application: Water, Fuel Level Sensor· Measuring Range:0-60m· Output Signal:4-20ma/hart· Accuracy:0.5%fs, 1%fs· Power Supply:24vdc· Output:4-20 Ma Liquid Ultrasonic· Type: Ultrasonic Level Transmitter1910unitautomated Weather Station, · Style : Display Version 3· Batteries: 4 Aa Batteries Required.· Assembly Required : No· Batteries Required? : Yes· Included Components : Digital Display With Pc Connect, 5-in-1 Weather Sensor, Usb Cable, Mounting Bracket, Mounting Hardware, Power Adapterlot No. Ixplumbing Supplies2050lengthgi Pipe, 50 Length· Schedule 40· 1 1/2” Diameter212lengthg.i Pipe, · 1 ¼” Dia. X 6m· Schedule 40lot No. Xsteel Sheets And Mesh221sheetsteel Plate, 6mm X 1.20m X 2.40m 235sheetsteel Plate, G.i., Gauge # 22 X 1.20m X 2.40mlot No. Xielectrical Supplies And Materials2410packcable Tie, M3 X 100 Mm2510rollelectrical Tape, Rubber 18mm X 5m Self Fusing Ethylene Propylene Rubber (roll) 265rollguy Wire, · # 12 G.i. Wire· 30 Kilos/roll27401pieceturn Buckle, 12mm X 0.20m (hook & Eye)*** Nothing Follows *** Bid Documents Shall Be Available At The Bac Office, New City Hall, Lgu Bayawan City Upon Payment Of Prescribed Non-refundable Fee In The Amount Of Php Bidders Shall Drop Their Technical And Financial Proposals In The Bid Box At The Bac Office, Bayawan City On Or Before The Deadline Of Submission Of Bids As Shown Below. All Particulars Relative To Eligibility Process, Opening And Evaluation Of Bids, Postqualification And Award Of Contract Shall Be Governed By The Applicable Provisions Of Ra. 9184. The City Of Bayawan Reserves The Right To Reject Any Or All Bids, To Waive Any Defects Or Formality Therein And To Accept Bids Considered Responsive And Most Advantageous To The Government. The Complete Schedule Of Activities Is Listed, As Follows: Basis Of Evaluationper Lotper Itemlot No.description Of Lottotal Abc Of Lotbid Securitycash/mc/bank Gurantee (2% Of Abc)1aggregates7,100.00142.002bar And Rebar40,100.00802.003batteries, Cells And Accessories750,000.0015,000.004carpentry Tools And Supplies21,940.00438.805cement And Additives9,000.00180.006flood Rescue Equipment240,000.004,800.007information And Communication Technology Equipment, Devices And Accessories494,000.009,880.008measuring/observing/testing Devices525,000.0010,500.009plumbing Supplies62,200.001,244.0010steel Sheets And Mesh24,100.00482.0011electrical Supplies And Materials61,105.001,222.101,000.00 Invitation To Bid Republic Of The Philippinesprovince Of Negros Orientalcity Of Bayawanbids And Awards Committee(035) 531-0020 Local 202(035) 430-0439 (telefax)email: Bac.bayawan@gmail.comhttp://www.bayawancity.gov.ph Activitiesscheduleissuance Of Bid Documents December 17, 2024 To January 6, 2025@ 5:00 P.m.pre-bid Conference December 26, 2024@ 9:00 Amdeadline/opening Of Bids January 7, 2025@ 9:00 Ampost Qualificationjanuary 14, 2025@ 9:00 Amawarding Of Bidsjanuary 21, 2025@ 9:00 Am Approved:virginia D. Sadiasa City Civil Registrar Bac Chairman