Tenders of Eastern Railway

Sc. Steel Rusted Turning . Condition-1] Materials Will Be Delivered On Weight Basis And Weighment Will Be Done On Electronic Weighing Machine Of Capacity 1 Ton In The Shed Premises Only, 2] Materials Will Be Sold On As Is Where Is Basis.

Sc. M & P Overaged And Unserviceable Equipments Consisting Of A]sc. Investa Lathe (l-200) Lathe Investa Comp All Geared Lead Sspcs Gap Lead Comp With Chip Tray And Fitting With Standard Equipments (excluding Of 5 Hp Motor & Motorized Coolant Pump), Qty- 1 No, B] Oil Purification Plant 2500 Lph Capacity As Per Following Specification A) Heater Set-01 No, B)filter Paper Set-01 No, C) Themostant-1 Set ,d) Dial Themometer-01 Set. E) Pressure Vacuum Gauge -01 Set (including 1.5 Hp 3phase Motor, Qty-1 No, C]precession Value Reface Wolf Type Heavy Duty Sr54a Suitable For Operation On 220/250 Volt (0.5hp) Ac/dc Supply, Qty-1 No, Total Qty- 1 By Lot. Condition-1] Materials Will Be Sold On As Is Where Is Basis, 2] Cutting Allowed If Required And Justified By The Custodian And The Cost Of The Cutting Will Be Borne By The Purchaser Himself, 3] The Purchaser Will Have To Make His Own Arrangement For Cutting And Loading Of The Scrap Materials Maintaining All The Safety Measures.

Scrap M.s. Consisting Of Turning And Boring Only. Condition:-weighment Will Be Done At Ssy Weighbridge In Jamalpur Workshop.

Rail 52 Kg (sc)

1] Sc. Bed Sheet Handloom, Size 229x140 Cms, Qty-19438 Nos, 2] Sc. Bed Sheet Poly Vastra, Size 229x140 Cms, Qty-305 Nos, 3] Sc. Pillow Sleeve Handloom, Size 65x38 Cms, Qty-33184 Nos, 4] Sc. Pillow Sleeve Poly Vastra, Size 69x46 Cms, Qty-159 Nos, 5] Hand Towel, Size 60x40 Cms, Qty- 29122 Nos, 6] Sc. Woolen Blanket, Size 229x152 Cms, Qty-26 Nos, 7]sc. Soft Blanket, Size 215x120 Cms. Qty-82 Nos. 8] Sc. Pillow Hollow Fiber Small, Size 60x36x12 Cms. Qty-2542 Nos, 9] Sc. Pillow Hollow Fiber Large, Size 67x45x14 Cms. Qty-39 Nos. Condition- The Scrap Linen Items Will Be Handed Over To The Firms After Cutting It Into Two Pieces For Avoiding Recycling Of Condemned Linen.

1] Sc. Black Smith Hammer , M/c Code- N/202, Make- Na, Location- Smithy Shop [02], 2] Sc. Black Smith Hammer , M/c Code- N/201, Make- Na, Location- Smithy Shop [02], 3] Sc. Black Smith Hammer , M/c Code- N/203, Make- Na, Location- Smithy Shop [02], 4] Sc. Black Smith Hammer , M/c Code- N/204, Make- Na, Location- Smithy Shop [02]. Condition- 1. Pulley Train Arrangement, General Accessories & Any Other Loose Ferrous And Nonferrous Items Are Exclusive Of The Main Machine And Are Not Allowed For Lifting By The Purchaser. 2. Picking And Choosing Of Materials Near The Machine Is Not Allowed.3. Purchaser Has To Make His Own Arrangement For Lifting And Taking Delivery Of The Machine.4. Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.5. The Complete Machine Will Be Sold On "as Is Where Is Basis",6. Machine Will Be Delivered As Per Nomenclature.7. Digging Is Allowed If Required And Justified For Delivery Purpose But The Railway Land Is To Be Leveled And Cleaned Before Taking Delivery Of The Sold Machine, 8. Cutting/dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc. Get Affected In Any Way.

Sc. 10 Ton Heat Treatment Furnace, M/c Code- 594, Make- Na, Location- Foundry. Condition- 1. Pulley Train Arrangement, General Accessories & Any Other Loose Ferrous And Nonferrous Items Are Exclusive Of The Main Machine And Are Not Allowed For Lifting By The Purchaser. 2. Picking And Choosing Of Materials Near The Machine Is Not Allowed.3. Purchaser Has To Make His Own Arrangement For Lifting And Taking Delivery Of The Machine.4. Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.5. The Complete Machine Will Be Sold On "as Is Where As "basis.6. Machine Will Be Delivered As Per Nomenclature.7. Digging Is Allowed If Required And Justified For Delivery Purpose But The Railway Land Is To Be Leveled And Cleaned Before Taking Delivery Of The Sold Machine, 8. Cutting/dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc. Get Affected In Any Way.

1]sc. Diesel Engine Generator Set Alternator 1200 Kva, Capacity- 6 Kv, 3ph, Makers Name-(alt)-vebelbtal Werk Sr No.- 216912, Makers No-magdeburg, Sr No. 856480, Qty- 01 No., 2] Sc. Diesel Engine Generator Set Alternator 1200 Kva , Capacity- 6 Kv, 3 Ph ,makers Name-(alt)- Vebelbtal Werk, Sr No- Not Found, Makers No- Magdeburg Sr No- 856477 , Qty- 01 No. Condition- 1]materials Will Be Delivered As Is Where Is Basis, 2]cutting And Dismantling Allowed If Required And Justified By The Custodian, 3] Cost Of Cutting/dismantling Will Be Borne By The Purchaser, 4] Cables Attached With The Machine Will Have To Be Handed Over To Custodian During Delivery, 5] Purchaser Crane Allowed If Required.

Scrap Rail 60 Kg.

Scrap And Condemned Machine & Plants Consisting Of M&p No.9302 Light Lathe.conditions:-[1] As Is Where Is Basis [2] Minimum Dismantle In 2 Parts [3] All Electrical Fittings &electrical Motor Are Included From Sale. [4] Before Bidding Bidders Are Advised To Inspect And Tally Every Details Of The Lot As Appearing In Catalogue Which Is Published In Ireps Portal With The Actual Material In Ground. No Complaints/claim By The Purchaser Will Be Entertained In This Regards After E-auction Sale. [5] Custodian May Allow Purchaser To Bring Crane If It Is Required And Justified.[6] Cutting/ Dismantling Of Machine Is To Be Done In Such A Way So That No Adjacent Machine, Structure, Installation Or Machine Accessories Etc Get Affected In Any Way.