Computer Tenders

Details: Description Request For Quotations The Philippine Council For Health Research And Development (pchrd), Through Its Bids And Awards Committee (bac), Requests Philgeps Registered Suppliers To Submit Sealed Quotations For The Supply And Delivery Of Various I.t. Equipment And Accessories With A Total Approved Budget For The Contract (abc) In The Amount Of Four Hundred Three Thousand Five Hundred Pesos (p 403,500.00). A) Twelve (12) Units 24” Computer Monitor 144 Hertz Hdmi • Display Colors: 16.7m • Flicker Free: Yes • Refresh Rate(max): 144hz • Video Feature • Supports Both Adaptive-sync With Nvidia Geforce* Graphics Cards And Freesync With Amd Radeon Graphics Cards *compatible With Nvidia Geforce Gtx 10 Series, Gtx 16 Series, Rtx 20 Series And Newer Graphics Cards • Color Saturation: 72% Ntsc • Panel Type: Ips • True Resolution: 1920x1080 • Display Viewing Area (hxv): 527.04 X 296.46 Mm • Display Surface: Non-glare • Pixel Pitch: 0.2745 Mm • Abc = Php 120,000.00 B) Twelve (12) Pcs. 10-in-1 Type C (10-in-1 Usb C Hub Expansion) • Type C Pd Charging Port, • 4k Hdmi Port, 3 Usb 3.0 Ports, • Sd/tf Card Reader, A 3.5mm Audio Jack • 1080p Vga Port • Abc = Php 36,000.00 C) Ten (10) Pcs. Desktop Wifi Dongle • Fast Wifi 6 - Break The Gigabit Barrier With Speeds Up To 1201 Mbps (5 Ghz) + 574 Mbps (2.4 Ghz). • Dual Band Wireless - 2.4 Ghz And 5 Ghz Bands For Flexible Connectivity. • Lower Latency Gameplay - Ofdma And Mu-mimo Ensure The Most Efficient Wifi Connection For Your Pc. • Improved Security - Wpa3 Provides The Latest Security Enhancements For Personal Password Protection. • Nano Design – Small, Unobtrusive Design Allows You To Plug It In And Forget It Is Even There • Setup Made Easy - Tx20u Nano Comes With Its Driver Pre-loaded. Just Plug And Install. • Abc = Php 10,000.00 D) Five (5) Pcs. Tower Universal Extension • 16 Gang Universal Tower Extension Cord • Safety Shutter Protection • Resistant To Pressure, Heat And Moisture • Unique Design Suited For Office Or Home Use • Lightning Protection Series • Flame Retardant Enclosure • 16 Universal Outlets • 1.83 Meter Cord Length • With Power Indicator • With Safety Breaker For Protection Against Overloading • Abc = Php 10,000.00 E) Two (2) Pcs. Nvme Docking Station • Size: 163x125x41mm（6.49 X4.92 X1.61inch） • Material:abs+aluminum Alloy +pvcb • Speed：10gbp Transmission Speed • Support M.2 Nvme B+m / M Key 2230 2242 2280 22110. • Clone+read Write • 1gb Transmission In 1 Second • Supports Up To 2tb Nvme M.2 Ssd • Tool Free Design, Plug And Play, No Driver Required. • Two Sets Of 1:1 Nvme Ssd Clone Design, Working Independently Without Interfering With Each Other • Suitable For Computers, Mobile Phones, And Tablets To Read And Expand Memory Space • Abc = Php 6,000.00 F) Five (5) Pcs. Mac Hdmi Converter • Type: Mini Dp To Hdmi Adapter • Color: White • Material: Plastic Housing • Input Type: Mini Display Port(male) • Output Type: Hdmi(female) • Hdmi Highest Video Resolution: 1080p • Cable Length: 23.5cm/9.25" (approx.) • Suitable For Macbook, For Macbook / Air / Imac With Mini Displayport • Abc = Php 5,000.00 G) Fifteen (15) Pcs. Wireless Mouse • Rechargeable - Usb Type-c Charging Supported • 2.4ghz Wireless • Adjustable Resolution To 1000-1200-1600-2000 Dpi. • Sensor: Optical • Distance: 10~15 M • Report Rate: 125 Hz • Buttons: 4 • Style: Symmetric • System:windows 7/8/8.1/10/11 • Abc = Php 15,000.00 H) Fifteen (15) Pcs. Wireless Keyboard • Operating Range: 10 M • Rechargeable - Usb Type-c Charging Supported • Connection: Bluetooth / 2.4g • Multi-device: 4 Devices ( Bt*3, 2.4g*1) • Layout: Windows ｜android｜mac｜ios • Character: Silk Printing + Uv • Battery: 300mah Lithium Battery • Receiver: Nano Usb Receiver • Net Weight:485 G (w/ Battery) • Includes: Keyboard, Nano Receiver, Usb Extension Cable, Type-c Charging Cable • System Platform: Windows / Mac / Ios / Chrome / Android • Abc = Php 22,500.00 I) Two (2) Pcs. Electric Screw Driver Precision Tool Kit • Ultimate 150 In 1 Electric Screwdriver Set • Electric Screwdriver Speed Of Up To 200rpm • Rechargeable Battery That Can Operate For Up To 3.5 Hours • Including Electric/manual Handle, Extension Shaft, Spudgers, Suction Cup, (de)magnetizer, Finger Cot, Tweezer, Bruch, Screw Mat • Hex: H0.7, H0.9, H1.0, H1.3×2, H1.5×2, H2.0, H2.5, H3.0, H3.5, H4.0, H4.5, H5.0, H6.0 • Torx: T1×2, T2×2, T3×2, T4×2, T5, T6, T7, T8, T9, T10, T15, T20 • Torx Security: T5h, T6h, T7h, T8h, T9h, T10h, T15h, T20h, T25h • Flathead: 1.0×2, 1.3×2, 1.5×2, 2.0×2, 2.5×2, 3.0×2, 3.5×2, 4.0×2 • Nut Driver: 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5 • Phillips: 0000×2, 000×2, 00×2, 0×2, 1×2, 2×2 • Tri-point: Y0.6×2, Y1.5×2, Y2.0, Y2.3, Y3.0 • Pozidriv: 000×2, 00×2, 0×2, 1, 2 • Pentalobe: P0.8×2, P1.2×2, P1.5×2, P2.0×2 • Triangle: 2, 2.3, 2.7, 3 • U-type U2.3, U2.6, U8 • Square S0, S1, S2 • Gamebit: 3.8, 4.5 • Conical Needle: 0.1, 0.3 • 1/4" To 4mm Driver Adapter 1pcs • Others Standoff Bit For Iphone, Sim Card Eject Bit, Flat Scraper, Ics 2.0, Pb • Abc = Php 10,000.00 J) One (1) Pc. Wireless Microphone • Max System Capacity: 40 Channels (standard Density), 80 Channels (high Density) • Rechargeable Lithium Ion (bodypack, Boundary Transmitters), • Range: 150 Feet (50 Meters) • 2pcs Wireless Microphone • Abc = Php 10,000.00 K) Three (3) Pcs. Wireless Microphone • 24-port Gigabit (24 100/1000mbps Rj45 Ethernet Ports) • Abc = Php 45,000.00 L) One (1) Pc. Audio Interface • Instrument Inputs Xx1 • Line Inputs X 1 • Line Outputs X 2 • Connectivityusb Type-c • Simultaneous I/o4 X 2 (including Loopback Inputs) • Abc = Php 20,000.00 M) Three (3) Pcs. Flash Drive Ssd 1tb • Abc = Php 15,000.00 N) One (1) Pc. Wireless Solidcom Se • Los Range. 1,100ft (350m) • Operating Frequency. 2.4 Ghz. • Modulation Mode. Gfsk. • Transmit Power. ≤ 20dbm. • Receiver Sensitivity. < -92 Dbm. • Battery Capacity. 770 Mah (2.926wh) • Charging Time. < 3 Hours. • - 4 Pieces Single-ear Noise-canceling Headset • Abc = Php 49,000.00 O) One (1) Pc. Wlan Card Specifications For Ax201 • Wi-fi 6 Supported Operating Systems: Windows 11, 64-bit* O Windows 10, 64-bit*linux* O Antenna 2x2 O Bands 2.4, 5 Ghz (160mhz) O Max Speed 2.4 Gbps Wi-fi Certified*, • Abc = Php 2,000.00 P) Fourteen (14) Pcs. Wireless Headset 𝗧𝗘𝗖𝗛𝗡𝗜𝗖𝗔𝗟 𝗦𝗣𝗘𝗖𝗜𝗙𝗜𝗖𝗔𝗧𝗜𝗢𝗡𝗦 • Connection Mode O ① 2.4ghz Wireless ② Bluetooth V5.0 ③ 3.5mm Wired Audio O Operating Range: Up To 12m (40 Feet) O Built-in Battery: 1200mah Lithium Battery O Playback Time: 44h (light Off) / 22h (light On) • Headphone O Speaker: 50mm O Frequency: 20hz - 20khz O Impedance: 16ohm O Sensitivity: 105db • Microphone O Mic. Type: Unidirectional O Frequency: 100hz - 10khz O Sensitivity: -42db • Cable Length O Type-c Charging Cable: 80 Cm O 3.5mm Audio Cable: 150 Cm • Abc = Php 28,000.00 ***date Of Delivery: On Or Before December 13, 2024*** Qualified Bidders Should Submit Their Quotations To The Address Below On Or Before November 25, 2024 (monday), 10:00 Am. Failure To Strictly Comply With The Deadline And General Conditions Shall Automatically Disqualify The Bidder/s From The Bidding Process. Winning Bidder Will Be Required To Submit Additional Requirements As Stipulated In The Irr Of Ra 9184. Pchrd Reserves The Right To Reject Any Or All Quotations, To Waive Formality Therein And To Accept Offers That May Be Considered Most Advantageous To The Government. For Further Information, Please Refer To: Mr. Cirio D. Pangan Jr. Secretariat, Bids And Awards Committee Philippine Council For Health Research And Development Pchrd Saliksik Building, Sikap Street, Dost Main Compound, Gen. Santos Ave., Bicutan, Taguig City Email: Procurement@pchrd.dost.gov.ph Tel. No.: 8837-2931 Loc. 506 (sgd.) Maria Violeta G. Intia Chair, Bac

Details: Description 1. The Bases Conversion And Development Authority (bcda) Is A Government Corporation Mandated To Transform Former Military Bases And Properties Into Premier Centers Of Economic Growth As Stipulated In Its Mandate - Republic Act No. 7227 Otherwise Known As The “bases Conversion And Development Act Of 1992”. 2. The Bcda, Through Its End-user Delegated By The Bids And Awards Committee For Consulting Services (bac-c), Intends To Procure And Engage The Services Of A Consultant Under Section 53.9 "negotiated Procurement - Small Value Procurement" Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. 3. The Approved Budget For The Contract (abc) Through The Cy 2024 Corporate Operating Budget (cob) Is Pesos: One Million And 00/100 (php 1,000,000.00), Inclusive Of Vat And All Applicable Taxes, Fees And Incidental Expenses. 4. The Consultant Must: A. Be Registered With The Philippine Government Electronic Procurement System (https://www.philgeps.gov.ph); B. Be Any Of The Following: - Duly-licensed Filipino/sole Proprietorship - Partnerships Duly Organized Under The Laws Of The Republic Of The Philippines And Of Which At Least Sixty Percent (60%) Of The Interest Belongs To Citizens Of The Philippines - Cooperatives Duly Organized Under The Laws Of The Philippines - Persons/entities Forming Themselves Into A Joint Venture, I.e. A Group Of Two (2) Or More Persons/entities That Intend To Be Jointly And Severally Or Liable For A Particular Contract; Provided, However, That Filipino Ownership Or Interest Thereof Shall Be At Least Sixty Percent (60%). For This Purpose, Filipino Ownership Or Interest Shall Be Based On The Contributions Of Each Of The Members Of Each Joint Venture As Specified In Their Jva. C. Have At Least Two (2) Years In Business Operation. In The Case Of Joint Ventures, The Lead Consulting Firm Should Have At Least Two (2) Years Of Business Operation; D. Have Two (2) Years Of Experience In Maintaining, Troubleshooting, And Handling Technical Back-end Of Websites; E. Have Handled At Least Three (3) Projects Similar To The Project Being Bid Out; F. Have Handled At Least One (1) Website Project Equivalent To At Least Fifty (50%) Of The Abc Or Amounting To Php 500,000.00. G. Have A Team Composed Of Three (3) Key Members: Account Manager, Lead Programmer/full Stack Developer, And User Interface/user Experience (ui/ux) Designer With At Least Two (2) Years Of Experience In Web Development And Maintenance As Related To The Function In The Team. 5. The Detailed Scope Of Services And Deliverables Of The Consultant Are Indicated In The Attached Terms Of Reference (tor) For The Project. 6.the Consultant Shall Be Evaluated Using The Quality-based Evaluation (qbe) Procedure. 7. The Criteria And Rating For The Selection Of The Winning Consultant Are As Follows: Evaluation Criteria - Score - Required Minimum Score Applicable Experience Of The Consultant - 45.00% - 31.50% Qualification Of Personnel Who Shall Be Assigned To The Project - 25.00% - 17.50% Plan Of Approach And Methodology - 30.00% - 21.00% T O T A L - 100.00% - 70.00% Bidders Must Pass The Required Minimum Score Of Seventy Percent (70%) On Each Criterion. 8. The Consultant Is Required To Submit The Following Documents To Be Used By Bcda As The Basis For The Bid Evaluation: Ef 1 - Eligibility Documents (philgeps Registration) Red Membership Shall Also Submit The Company’s Mayor’s Permit And The Latest Income Tax Return Tpf 1 - Statement Of All Completed Government And Private Contracts Tpf 2 - Summary Of Completed Services For The Past 2 Years (all Completed Government And Private Contracts) Tpf 3 - Summary Of Curriculum Vitae Tpf 4 (a To C) - Curriculum Vitae (cv) For Proposed Professional Staff Tpf 5 - Format Of Cv Of The Firm/entity Tpf 6 - Statement Of Consulting Services With At Least Php 500,000.00 Contract For The Past 2 Years Tpf 7 - Certificate Of Availability Of Key Personnel Tpf 8 - Plan Of Approach And Methodology Fpf 1 - Financial Proposal Submission Form Omnibus Sworn Statement (duly Notarized) Bid Securing Declaration Form (duly Notarized) 9. The Consultant Is Required To Submit Its Financial Proposal (fpf 1) In A Separate Sealed Envelope. The Financial Proposal Shall Not Exceed The Abc, And Shall Be Deemed To Include The Cost Of All Taxes, Duties, Fees, And Other Charges Imposed Under Applicable Laws. Financial Proposals Received In Excess Of The Abc Shall Be Automatically Rejected. 10. The Engagement Of This Website Maintenance, Enhancement, Web Hosting And Administration Services Shall Be For A Period Of One (1) Year As Reckoned From The Date Of Receipt Of The Notice To Proceed Issued By The Bcda. 11. Pre-bid Conference. The Bcda Will Hold A Pre-bid Conference On 25 November 2024, 11:00 A.m. At The Bcda Corporate Center, 2nd Floor Bonifacio Technology Center, 31st Street Corner 2nd Avenue, Bonifacio Global City, Taguig City And/or Through Video Conferencing Via: Zoom Link Https://bit.ly/nccpre-bidconference 12. Deadline For Submission Of Proposal. The Bid Proposal Must Be Duly Received Through Manual/physical Submission At The Bcda Corporate Center, 2nd Floor Bonifacio Technology Center, 31st Street Corner 2nd Avenue, Bonifacio Global City, Taguig City, On Or Before 28 November 2024, 12:00 Nn. Late Submission Of Bid Proposal Shall Not Be Accepted. The Bidders May Submit Their Bid Proposal Before The Deadline For Submission Of Bids To Avoid Late Submission. The Editable Bid Forms May Be Downloaded Using The Link Below: Https://bit.ly/nccwebsiteforms Please Be Reminded That The Reference Time That Will Be Followed Shall Be The Computer System Clock At The Bcda Central Receiving And Releasing Area (crra), Bcda Corporate Center, 2nd Floor Bonifacio Technology Center, 31st Street Corner 2nd Avenue, Bonifacio Global City, Taguig City. All Bidders Are Advised To Synchronize Their Timepieces Therewith. 13. Opening Of Bid Proposals. Opening Of Bid Proposals Shall Be On 28 November 2024, 1:00 Pm, At The Bcda Office, Bcda Corporate Center, 2nd Floor Bonifacio Technology Center, 31st Street Corner 2nd Avenue, Bonifacio Global City, Taguig City, And/or Through: Zoom Link Https://bit.ly/openingbidsnccwebsite The Bid Proposal Will Be Opened In The Presence Of The Bidder’s Or Its Authorized Representative Who Chooses To Attend The Activity. Attendance Of The Bidders During The Opening Of The Bid Proposal Is Not Mandatory, But Merely Discretionary Or Optional. 14. The Bcda Reserves The Right To Accept Or Reject Any And All Bids, Annul The Procurement Process Or Not Award The Contract At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder. 15. The Technical Proposal And The Financial Proposal Shall Be Submitted By Hand On The Address Below: Leilani B. Macasaet Officer-in-charge, Investment Promotions And Marketing Department Bases Conversion And Development Authority 2nd Floor, Bonifacio Technology Center 31st Street Corner 2nd Avenue Issuance Date: November 21, 2024 Leilani B. Macasaet Officer-in-charge, Investment Promotions And Marketing Department

Details: The framework agreement covers the supply of connection equipment, passive elements, tools and measuring devices, as well as associated accessories for cabling and computer networking and telecommunications intended for services falling within the scope of the Police Prefect's jurisdiction.

Details: Description Invitation To Bid For Procurement Of I.t. Equipments For Various Offices Of The City Government Of Malabon (re-bidding) 1. The City Government Of Malabon, Through The Capital Outlay Under The Annual General Fund B.y 2024 Intends To Apply The Sum Of Seven Million Nine Hundred Sixty Three Thousand Seven Hundred Thirty Pesos Only (p 7,963,730.00), Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of I.t. Equipments For Various Offices Of The City Government Of Malabon (re-bidding). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Malabon Now Invites Bids From Eligible Bidders For The Procurement Of I.t. Equipments For Various Offices Of The City Government Of Malabon (re-bidding). Delivery Of Goods Is Required Within The Period Specified Under Section Vi. Schedule Of Requirements. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act,” And Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat And Inspect The Bidding Documents At The Address Given Below From October 17, 2024 To November 04; 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee In The Amount Of Ten Thousand Pesos (p 10, 000. 00). 6. The City Government Of Malabon Will Hold A Pre-bid Conference On November 18, 2024 (monday); 2:20 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. 7. Bids Must Be Delivered To The Address Below On Or Before November 28, 2024 (thursday); 12:00 N.n. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms Set In The Amount Stated In Itb Clause 18. 8. Bid Opening Shall Be On November 28, 2024 (thursday); 2:20 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The City Government Of Malabon Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information Please Refer To: (originally Signed) Florlinda C. Ayroso Head - Bac Secretariat F. Sevilla Blvd., San Agustin, Malabon City (originally Signed) Alexander T. Rosete, Ph.d. Chairperson - Bids And Awards Committee 54 Units Desktop Computer Intel Core I3-1200 (3.3ghz Up To 4.30ghz) Alderlake/12th Gen/12mb/4cores/8threads/730 Hdgfx/10nm/lga1700 Processor, H610m-e D4 / Csm S1700 (12th Gen) /2xddr4/pcie4.0/3.0/2xm.2/usb3.2/d-sub/hdmi/dp/realtek 7.1/glan Matx Motherboard, Kingston 16gb Ddr4 3200mhz (1x16gb) Fury Beast Black (kf432c16bb1/16)/(kf432c16bb/16) Memory, 512gb Legend 710 Pcie Gen3 X4 Nvme M.2 2280 (aleg-710-512gcs) R/w 2400/1800mb/s Solid State Drive, 1 Terabyte Sata 6.0gbs (sti000dm010/14) 64mb Cache Hard Drive, V550 Power Supply (with 120mm Fans) Mid Tower Gaming Chassis, Acer 24.5 " Ka252q E0bi Ips/100hz/1920x1080/1ms/16.9/hdmi/vga/black, Nx1600 Usb Keyboard + Mouse Combo Black (11994/12203), Windows 11 Professional 64 Bit Eng International Blk/bnc (fqc-10528/29/21h2/btc-03301/20h2/23h2), Microsoft Office Home And Student 2021 Pc/mac (79g-05387), With Ecotank Printer L121, Print Speed Up To 9.0 Ipm / 4.8 Ipm, Paper Feed Method-friction Feed, Paper Hold Capacity: Input Capacity:up To 50 Sheets Of Plain Paper, Paper Sizes:a4,letter,legal, Print Margin: 3 Mm Toop, Left, Right, Bottom Via Custom Settings In Printer Driver 10 Units Laptop A315-59570z Pure Silver Intel Core I5-1235u/8gb Ddr4 3200mhz/512gb Nvme Pcie Ssd/intel Uhd Graphics/15.6 Fhd Ips/windows 11 Pro Sl 64bit/ms Ooffice Home And Student 2021/webcam/wifi/bt/lan/audio Port/usb 3.0/hdmi 1 Unit Eb-e01 Xga 3ld Projector,projection Technology: Rgb Liquid Crystal Shutter Projection System (3lcd), Native Resolution: Xga (1024 X 768),size: 0.55” (c2fine), Lightsource:type: 210w Uhe, Life (normal / Eco): 6,000 / 12,000 Hours, Aspect Ratio:4:3, Projection Lens:type: No Optical Zoom / Focus (manual),f-number: 1.44,focal Length: 16.70 Mm,throw Ratio: 1.00 – 1.35 (digital Zoom),zoom Ratio: 1.44 - 1.95 (wide To Tele), Connectivity:usb Interface:usb Type B: 1 (for Firmware Update, Copy Osd Settings),analog Input:d-sub 15pin: 1,digital Input:hdmi: 1,screen Size (projected Distance):standard Size:tele: 22” To 259” [0.87 To 10.34 M],wide: 30” To 350” [0.87 To 10.34 M],dimension Excluding Feet (w X H X D):302 X 77 X 234 Mm,weight:approx. 2.4 Kg,high Efficiency Filter,power Supply Voltage:100 - 240 V Ac ±10%, 50/60 Hz,resolution, Projectors Facets:xga,contrast Ratio, Projectors Facets:15,000:1, Brightness Range Lumens, Projectors Facets:2000, Features, Projectors Facets:quick Corner. 1 Unit Eb-685w Ultra Short Throw Wxga 3lcd Projector With 120 Inches Or Bigger Projector Screen 3 Units Starlink, Satellite Internet Kit With Starlink Cable (150 Feet), And Starlink Ethernet Adapter With One (1 ) Year Roam Subscription) 3 Units Portable Power Station 220 Volts 600 Watts With 2ac Outlets 1 Lot Ihomis Server, Front Storage 3.5 Chassis,backplane Sas/sata Backplane,rear Storage No Rear Storage,trusted Platform Module Trusted Platform Module 2.0 V3,chassis Configuration 3.5" Chassis With Up To 12 Hard Drives (sas/sata), V3,processor Intel Xeon Silver 4309y 2.8g, 8c/16t, 10.4gt/s, 12m Cache, Turbo, Ht (105w) Ddr4-2666, Processor Thermal Configuration High Performance Heatsink, Processor Thermal Configuration Cpu Blank, Memory Configuration Type Performance Optimized, Memory Dimm Type And Speed 3200mt/s Rdimms, Memory Capacity 32gb Rdimm, 3200mt/s, Dual Rank 16gb Base X8, Raid Configuration Unconfigured Raid, Raid/internal Storage Controllers Perc H755 Adapter, Low Profile, Hard Drives 4tb Hard Drive Sata 6gbps 7.2k 512n 3.5in Hot-plug, Bios And Advanced System Configuration Settings Performance Bios Settings, Advanced System Configurations No Energy Star, Fans High Performance Fan X5, Power Supply Dual, Hot-plug, Power Supply Redundant (1+1), 800w, Mixed Mode, Naf, Power Cords Power Cord - C13, 3m, 125v, 15a (north America, Guam, North Marianas, Philippines, Samoa, Vietnam), Power Cords Jumper Cord - C13/c14, 4m, 250v, 12a (north America, Guam, North Marianas, Philippines, Samoa), Pcie Riser Riser Config 4, Half Length, Low Profile, 1x16 + 1x4 Slots, 1 Cpu, Motherboard Poweredge R750xs Motherboard With Broadcom 5720 Dual Port 1gb On- Board Lom, Ethernet Mezzanine Adapters Broadcom 5720 Quad Port 1gbe Base-t Adapter, Ocp Nic 3.0, Additional Network Cards Broadcom 5719 Quad Port 1gbe Base-t Adapter, Pcie Low Profile, V2, Firmware Restrictions Apply, Poweredge 2u Standard Bezel, Bezel Dell Emc Luggage Tag R750xs, Boot Optimized Storage Cards Boss-s2 Controller Card + With 2 M.2 480gb (raid 1), Boot Optimized Storage Cards, Boss S2 Cables And Bracket For Embedded Systems Management (multi) Idrac9, Enterprise 15g, Quick Sync Quick Sync 2 (at-the-box Mgmt), Enabled, Rack Rails Cable Management Arm, 2u, Rack Rails Readyrails Sliding Rails Without Cable Management Arm, Server Accessories, Optical Mouse Ms116 - Black, Server Accessories Kb216 Wired Keyboard English, Shipping Poweredge Shipping, Apcc, Shipping Material Poweredge Shipping Material, Regulatory Poweredge 2u Ccc Marking, No Ce Marking, Apcc/tw, Cpu Configuration 1 Cpu Configuration, Internal Optical Drive No Internal Optical Drive. Software: Advanced System Configurations Uefi Bios Boot Mode With Gpt Partition, Operating System Windows Server 2022 Standard,16core,fi,no Med,no Cal, Multi Language, Os Media Kits Windows Server 2022,standard,16core,df Recovery Image, Multi Lang, (downgrade Not Included), Os Media Kits Windows Server 2022 Standard,16core,media Kit, Multi Lang, (downgrade Not Included), System Documentation No Systems Documentation, No Openmanage Dvd Kit, Services: Hardware Support Basic Next Business Day 36 Months- Acdts, Services: Extended Service Prosupport And Next Business Day Onsite Service-acdts Initial, 36, Infrastructure, Services:deployment Services Infrastructure Deployment Selected 883-17667 1 Services:gcp/oem Pm Partner Operations Support B2b 683 Deployment Svcs No Field Deployment Month(s) Infrastructure Deployment Svcs No Field Deployment, Services:deployment Services Infrastructure Deployment Selected Services:gcp/oem Pm, Partner Operations Support B2b, Windows Server Os Based Installation Deliverable, Activate Windows Server License, Activation: Once Windows Server Is Installed, You Should Activate The Product Using The Product Key, Configure Administrator Account, Ensure You’ve Set A Strong Password For The Default Administrator Account During Setup, Enable Network Configuration, Ensure Your Network Adapter Is Correctly Configured.set Static Ip Addresses For Servers That Will Host Important Services (like Dns Or Active Directory). Configure Dns Settings If Necessary. Configure Windows Firewall, Ensure The Windows Firewall Is Enabled And Configured Properly To Allow Necessary Traffic While Protecting The Server., Activate Roles And Features Using Server Manager, Server Manager: Open Server Manager And Use The Add Roles And Features Wizard To Activate The Necessary Roles And Features. Active Directory Domain Services (ad Ds) Used For Creating And Managing A Domain. Activates Services Like User Authentication, Group Policies, And Computer Management. File And Storage Services Allows For Managing File Shares, File Storage, And Ntfs Permissions On The Server. Hyper-v Activate This Role To Create And Manage Virtual Machines On Your Server. Web Server (iis) Install Internet Information Services (iis) If You Will Be Hosting Websites Or Web Applications.add Additional Features Like Php, Asp.net, And Ssl Certificates For Secure Communication. Remote Desktop Services (rds) Install Remote Desktop Services If This Server Will Host Remote Desktop Sessions For Multiple Users. Windows Defender Antivirus Ensure Windows Defender Is Enabled And Up-to-date To Protect The Server From Malware. Windows Update Check For Windows Updates And Install Any Critical Patches. Time Sync (ntp) Configuration Configure The Server To Sync Its Clock With An Ntp (networktime Protocol) Server, Especially If It Is A Domain Controller. Backup And Recovery Enable Windows Server Backup For Regular Backups. Ftp Server Activation Of Server/cal License.

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Semi-expandable Ict Equipment For Various Offices " 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Semi-expandable Ict Equipment For Various Offices " With An Approved Budget For The Contract (abc) Four Hundred Fifty-eight Thousand Five Hundred Pesos Only (php 458,500.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 4 Unit All In One Printer Functions : Print, Scan, Copy Memory: 128mb Display: 1 Line Lcd Interface: Hi-speed Usb 2.0 Wired/wireless Network: Wireless Lan Print Speed (laser Comparable): Up To 17ipm (mono) And 16.5ipm (colour) Print Speed (fast Mode): Up To 30ppm (mono) And 26ppm (colour) Print Resolution: Up To 1200 X 6000 Dpi 2-sided Print: Automatic (up To A4/ltr) Direct Wireless Connection: Wi-fi Direct Maximum Copy Size: A4 Copy Speed (laser Comparable): Up To 13ipm (mono) And 10.5ipm (colour) Copy Speed (fcot): Up To 10.5 Sec (mono) And 21 Sec (colour) Copy Resolution (colour): Print Max. 1200 X 2400 Dpi; Scan Max. 1200 X 600 Dpi Maximum Scan Size: Up To A4 Scan Resolution: Optical: Up To 1200 X 2400 Dpi; Adf: Up To 1200 X 600 Dpi) Scan Speed: From 3.35 Sec/4.38 Sec (a4 Size, 100 X 100 Dpi) Paper Input (standard Type): Up To 150 Sheets (80g/m2) Paper Output: Up To 50 Sheets (up To A4) Paper Handling Sizes: A4, Ltr, Exe, A5, A6, Photo 4" X 6", Indexcard 5" X 8", C5 Envelope, Com-10, Dl Envelope, Monarch 57,600.00 2 1 Unit All-in-one Color Ink Tank Printer Function: Multi-function (print, Scan & Copy) Output Color: Color Print Technology: Inkjet Print Speed: Black - 8.8ppm; Color - 5ppm Number Of Nozzles: Total 1,472 Nozzles Resolution: 4800 X 1200dpi (max.) Paper Size: A4, A5, B5, Letter, Legal, 4 X 6 Inch, 5 X 7 Inch, 8x 10 Inch, Envelopes (dl, Com10), Square (5 X 5 Inch), Business Card. Custom: (width 55 – 215.9mm, Length 89 – 676mm) Paper Type: Plain Paper, High Resolution Paper, Photo Paper Plus Glossy Ii, Photo Paper Plus Semigloss, Matte Photo Paper, Envelope, Glossy Photo Paper, Photo Sticker Paper Weight: Plain Paper: 64 – 105g/m2, Canon Specialty Paper 275g/m2; Photo Paper Plus Glossy Ii (pp-201). Input Capacity: 100 Sheets Input Tray Output Capacity: 50 Sheets Output Tray Duplex Printing: Manual (driver Support Provided) Scanner Type: Flatbed Scanning Speed: 19s Scan Resolution: 600 X 1 200dpi Scan Paper Size: A4, Letter 10,700.00 Multiple Copy: 1 – 20 Pages Copy Speed: 3.5ppm Connectivity: 1 Hi-speed Usb 2.0, Wi-fi Display: 1.2 Inch Segment Lcd Display Wireless: Yes, Ieee 802.11n / Ieee 802.11g / Ieee 802.11b Ink Tank: Yes Power: Input Voltage: Ac 100 – 240v; 50 / 60hz; Power Consumption: 11w (1.2w Standby) Ink Bottle: Gi-790 Black (6,000) Pages, Gi-790 Cyan, Magenta, Yellow (7,000) Pages 3 3 Unit All-in-one Ink Tank Printer Printer Type: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Printer Language: Esc/p-r, Esc/p Raster Nozzle Configuration: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 5760 X 1440 Dpi Automatic 2-sided Printing: No Print Speed: Photo Default - 10 X 15 Cm / 4 X 6 " *1: Approx. 69 Sec Per Photo (border) / 90 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour): Up To 33.0 Ppm / 15.0 Ppm*2 Iso 24734, A4 Simplex (black / Colour): Up To 10.0 Ipm / 5.0 Ipm*2 First Page Out Time From Ready Mode (black / Colour): Approx. 10 Sec / 16 Sec*2 Maximum Copies From Standalone: 20 Copies Maximum Copy Resolution: 600 X 600 Dpi Maximum Copy Size: A4, Letter Iso 29183, A4 Simplex (black / Colour): Up To 7.0 Ipm / 1.7 Ipm Scanner Type: Flatbed Colour Image Scanner Sensor Type: Cis Optical Resolution: 600 X 1200 Dpi Maximum Scan Area: 216 X 297 Mm Scanner Bit Depth (colour): 48-bit Input, 24-bit Output Scanner Bit Depth (grayscale): 16-bit Input, 8-bit Output Scanner Bit Depth (black & White): 16-bit Input, 1-bit Output Flatbed (black / Colour): 200dpi: Up To 11 Sec / Up To 32 Sec Number Of Paper Trays: 1 Standard Paper Input Capacity: Up To 100 Sheets Of Plain Paper (80 G/m2); Up To 20 Sheets Of Premium Glossy Photo Paper Output Capacity: Up To 30 Sheets Of Plain Paper (80 G/m2); Up To 20 Sheets Of Premium Glossy Photo Paper Maximum Paper Size: 215.9 X 1200 Mm Paper Sizes: Legal (8.5 X 14"), Indian-legal (215 X 345 Mm), 8.5 X 13", Letter, A4, 16k (195 X 270 Mm), B5, A5, B6, A6, Hagaki (100 X 148 Mm), 5 X 7", 5 X 8", 4 X 6", Envelopes: #10, Dl, C6 Print Margin: 0 Mm Top, Left, Right, Bottom Via Custom Settings In Printer Driver*3 Operating System Compatibility: Windows Xp / Xp Professional / Vista / 7 / 8 / 8.1 / 10 Windows Server 2003 / 2008 / 2012 / 2016 / 2019 Mac Os X 10.6.8 Or Later Usb: Usb 2.0 Printer Software: Epson Scansmart 28,800.00 4 5 Unit Color Document Scanner Specifications Scanner: 249,500.00 Scanner Type: Sheet-fed, 1-pass, Duplex Color Scanner Optical Resolution:600 Dpi Maximum Resolution:1200 Dpi Interpolated Monochrome Bit Depth:1-bitoutput Resolution:50 To 1200 Dpi Effective Pixels:5100 X 9300 Light Source:3-color Rgb Led Scanning Speed:letter Size: 45 Ppm/70 Ipm: 300 Dpi Black-and-white, Color, Gray Automatic Document Feeder: Capacity:100 Sheets Document Sizes: Paper Size Minimum: 2" X 2" Paper Size Maximum: 8.5" X 240" At 200 Dpi, 8.5" X 215" At 300 Dpi Daily Duty Cycle: 5,000 Sheets Paper Weight: 27 –413 G/m2 Consumables: Roller Assembly Kit: 200,000 Pages General: Operating Systems: Windows® 10 Windows 8/8.1 Windows 7 Mac Os X® 10.9.8 – Macos® 10.12.x Software Requires Internet Connection For Download And Installation. Temperature: Operating: 41 ° To 95 °f (5 ° To 35 °c) Storage: -13 ° To 140 °f (-25 ° To 60 °c) Humidity: Operating: 10 – 80% (no Condensation) Dimensions: Product Only: 11.7" X 7.7" X 12.5" Product In Package: 14.5" X 9.9" X 11.5" Weight: Product Only: 8.1 Lb. Product In Package: 10.6 Lb. 5 4 Unit Computer Speaker Dimensions Height: 110 Mm Width: 90 Mm Depth: 88 Mm Weight: .25 Kg Technical Specifications Total Watt (rms): 1.2w 3.5 Mm Input: 1 Usb Cable For Power: 1 Controls Power And Volume Controls On Right Speaker 3,000.00 6 3 Unit Computer Web Camera Resolution: Full Hd 1080p, 1920*1080 Pixels Lens Type: Full Hd Glass Lens Viewing Angle: 70 Degrees Focus Type: Fixed Focus Focus Range: 60cm And Beyond Built-in Mic.: Digital Hd Mic. Output Format: Mjpeg Frame Rate: 30fps Usb: Usb 2.0 System Requirements Compatible With: Windows 7 /8 / 8.1 / 10 Or Later Works In Usb Video Device Class (uvc) Mode: Mac Os 10.10 Or Later 3,900.00 Linux Os 2.6 Or Later Chrome Os 6.0 Or Later Android V6.0 Or Later Compatible With Social And Video Calling Software Of The Above System 7 1 Unit Dot Matrix Printer Print Method: Impact Dot Matrix Print Direction: Bi-direction With Logic Seeking Number Of Pins In Head: 9 Pins Print Speed: High Speed Draft: (10 / 12 / 15 Cpi): 347 / 357 / 390 Cps (condensed, 17 / 20 Cpi): 383 / 298 Cps Draft: (10 / 12 / 15 Cpi): 260 / 312 / 223 Cps (condensed, 17 / 20 Cpi): 222 / 260 Cps (emphasized, 10 Cpi): 130 Cps Nlq: (10 / 12 / 15 / 17 / 20 Cpi): 65 / 78 / 55 / 47 / 56 Cps Reliability: Printhead Life: Approx. 400 Million Strokes/wire Mean Print Volume Between Failure (mvbf): Approx. 20 Million Lines (except Print Head) Mean Time Between Failure (mtbf): Approx. 10,000 Poh (25% Duty) Print Characteristics: Character Sets: Italic Table, Pc437 (us Standard Europe), Pc850 (multilingual), Pc860 (portugese), Pc861 (icelandic), Pc863 (canadian French), Pc865 (nordic), Abicomp, Brascii, Roman 8, Iso Latin 1, Pc 858, Iso 8859-15 Paper Path: Manual Insertion: Rear In, Top Out Push Tractor: Rear In, Top Out Paper Media: Cut Sheet (single Sheet): Length: 100 ~ 364mm (3.9 ~ 14.3") Width: 100 ~ 257mm (3.9 ~ 10.1") Thickness: 0.065 ~ 0.14mm (0.0025 ~ 0.0055") Cut Sheet (multi-part Forms): Length: 100 ~ 364mm (3.9 ~ 14.3") Width: 100 ~ 257mm (3.9 ~ 10.1") Thickness: 0.12 ~ 0.39mm (0.0047 ~ 0.015") (total) Continuous Paper (single Sheet / Multi-part): Length: 101.6 ~ 558.8mm (4.0 ~ 22.0") Width: 101.6 ~ 254.0mm 4.0 ~ 10.0") Thickness: 0.065 ~ 0.39mm (0.0025 ~ 0.015") (total) Envelope (no.6): 14,000.00 Page 4 Of 5 Item No. Qty Description Total Length: 92mm (3.6") Width: 165mm (6.5") Thickness: 0.16 ~ 0.52mm (0.0063 ~ 0,0205") (total) Envelope (no.10): Length: 105mm (4.1") Width: 241mm (9.5") Thickness: 0.16 ~ 0.52mm (0.0063 ~ 0.0205") (total) Roll Paper: Width: 216mm (8.5") Thickness: 0.07 ~ 0.09mm (0.0028 ~ 0.0035") Supported Os And Applications: Supported Os: Microsoft® Windows® 2000 / Xp / Vista / 7 / 8 / 8.1 / 10 8 6 Piece External Hard Drive Connection Interface: Usb 3.0 Capacity: 1tb Storage Media: 2.5" Hdd 19,200.00 9 1 Unit Monitor 34 Inches” Wqhd (3440x1440) High Resolution 21:9 Ultra Wide Display 121% Srgb 144hz High Refresh Rate Immersive 1500r Curvature 144hz Curved Monitor 20,000.00 10 14 Piece Ssd Form Factor 2.5? Capacity 1 Tb Interface Sata Iii Dimensions (l X W X H) 0.28? X 3.96? X 2.75? Sequential Read Performance 535mb/s Sequential Write Performance 450mb/s" 51,800.00 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of November 27, 2024. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Description: ****amendment #1**** This Amendment Is To Respond To Vendor Questions Located In The Attachments; All Other Information Remains Unchanged. This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Solicitation Documents Will Be Provided In Either Of The Province Of New Brunswick's Two Official Languages; English Or French Upon Request. Instructions For Bid Submission 1. Effective April 15, 2020, Service New Brunswick Is No Longer Accepting Paper Bids, And The Central Tendering Branch Is Closed To The Public. Public Tender Openings Are No Longer Taking Place; However, Results Continue To Be Posted On Nbon. 2. Bids Will Only Be Accepted By Electronic Transmission As Follows: A. By E-bidding Through Nbon (when E-bidding Is Possible); Or B. By Fax To: (506) 444-4200 (fax To Dedicated Mailbox). Note: Proposals In Response To A Request For Proposals (rfp) Will Not Be Accepted By Fax; Or C. By Email To Nbbids@snb.ca Or Soumissionsnb@snb.ca (do Not Submit Bids To Any Other Email). Click Here Instructions For Bid Submission For Important Instructions On How To Submit Bids By Email. D. Please Refrain From Submitting Your Bid Through Multiple Electronic Channels To Avoid Duplicate Bids. 3. All Bids Must Be Properly Signed By An Authorized Person. A. For Bids Submitted By Email Or Fax: Typed Signatures (in Any Font) That Are Not On The Bid Itself (i.e. In The Body Of The Email Or On The Fax Cover Sheet) Will Not Be Accepted. 4. All Bids Must Be Legible, Properly Completed And Contain The Proper Solicitation Number. 5. The Proponent Is Solely Responsible For Ensuring That The Bid Submission In Its Entirety, Including All Attachments, Is Received Before Closing Date And Time As Indicated On The Solicitation Documents. A. The Proponent Bears All Risk Associated With Delivering Its Bid By Electronic Submission, Including But Not Limited To Delays In Transmission Between The Proponent's Computer And The Province's Electronic Mail System, Nbon Or Fax. B. The Date And Time Of Official Receipt Of The Bid Will Be The Time Of Receipt Recorded In The Nbon System (for E-bids) Or The Time Of Receipt In The Province's Electronic Mail System (for Fax And Email Bid Submissions). 6. All Bids Must Be Stated In Canadian Funds. Sales Taxes Should Not Be Included In The Unit, Extended Or Total Prices. 7. All Tenders Must Be F.o.b. Destination, Freight Prepaid. 8. This Invitation Is Being Conducted Under The Provisions Of The Procurement Act And Regulation 2014-93 As Of The Date Of The Issuance Of The Invitation. Direct Deposit The Province Of New Brunswick Is Now Using Direct Deposit As The Standard Method Of Issuing Payments. Suppliers Are Required To Provide Bank Account Information And An Email Address For The Notice Of Remittance. Please Send The Completed Direct Deposit Form To Service New Brunswick (e-mail Address And Mailing Address Are Indicated On The Form). Please Click On The Link Below To View The Direct Deposit Form. Https://www2.snb.ca/content/dam/snb/procurement/directdepositvirementdirect.pdf A Bidder Must Obtain Official Solicitation Documents From A Distribution Service, Authorized By The Minister Of Service New Brunswick, In Order To Submit A Bid. The Current Authorized Distribution Services Are The New Brunswick Opportunities Network (nbon) (operated By Service New Brunswick, Province Of Nb), Bidsalert (operated By Tendering Publications Ltd.) And Merx (operated By Mediagrif Interactive Technologies). Bids Should Be Submitted On The Official Bid Documents Obtained From These Authorized Distribution Services. The Province Of New Brunswick Reserves The Right To Negotiate Pricing, Value Added And Other Savings Opportunities With The Successful Proponent At Time Of Award And Throughout The Contract. All Suppliers Engaged To Deliver Services On Behalf Of The Government Of New Brunswick Must Ensure Compliance With The Official Languages Act In The Delivery Of Those Services. For More Information, Please Refer To The Official Languages Act. The Atlantic Provinces Standard Terms & Conditions For Goods And Services Apply To This Procurement And Are Considered To Be Incorporated Into This Document. By Submitting A Bid, You Agree And Accept These Terms And Conditions. Current "atlantic Provinces Standard Terms And Conditions" Are Available On The New Brunswick Opportunities Network, The Council Of Atlantic Premiers' Website Or From An Authorized Service Provider. Covid-19 Restrictions For Workers Entering New Brunswick All Suppliers And Workers Entering The Province Of New Brunswick For Work Purposes Must Comply With The Requirements Established By Worksafe Nb And Public Health, Including Isolation Requirements Where Applicable. Click Here For More Information On These Requirements. Questions: Written Questions Relating To This Opportunity May Be Submitted To The Address Provided Below Via Email By Clicking On Questions. Please Be Sure To Include The Solicitation/tender Number In The Subject Line. Email Address: Bidquestionssoumissions@snb.ca Note: This Email Account Is Strictly For The Receipt Of Questions On Open Opportunities. This Email Is Not For The Submission Of Bids. Covid-19 Supplier Vaccination Policy Suppliers Must Comply With All Gnb Health And Safety Policies And Standards Including, Without Limitation, All Health And Safety Policies And Standards Related To Covid-19, As Applicable. Go To Www.gnb.ca/nbon To View The Full Policy And Faqs. Under Canadian Law (and International Agreements), Your Bid Must Arrive Separately And Independently, Without Conspiracy, Collusion Or Fraud; See Http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home For Further Information. Pay Equity Does Your Organization Have 50 Or More Employees? The Government Of New Brunswick Is Committed To Encouraging And Incentivizing The Adoption Of Pay Equity By Employers Doing Business With Government. Prior To The Award Of Procurements For Goods And Services Valued Over $1,000,000, Suppliers, With Fifty (50) Or More Employees Will Be Required To Complete The Pay Equity Learning Module Developed By The Women's Equality Branch. Suppliers Should Provide A Copy Of Their Certificate Of Completion With Their Bid Submission. To Complete The Online Module And Obtain Your Certificate, Please Visit Www.gnb.ca/payequity. For Questions, Please Contact The Pay Equity Bureau Toll Free: (877) 253-0266 Or By Email: Peb-bes@gnb.ca. All Discounts Quoted Will Be Considered To Be Without Limitations. Award Of Contracts: No Contract Shall Be Awarded And No Payment Shall Be Made To A Vendor Unless Authorized By The Minister Or His Delegates. The Minister May Make An Award To The Preferred Vendor Conditional On The Negotiation And Acceptance Of A Detailed Contract Between The Province And The Vendor. In Such Cases, Should The Detailed Contract Negotiations Not Be Completed In A Reasonable Period Of Time, The Province Reserves The Right To Discontinue Negotiations With The Vendor And Subsequently Enter Into Negotiations With The Second Preferred Vendor. No Right Or Duty, In Whole Or In Part, Of The Vendor Under A Contract Issued May Be Assigned Or Delegated Without The Prior Consent Of The Strategic Procurement Branch. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. All Suppliers Engaged To Deliver Goods Or Services To The Government Of New Brunswick Must Ensure Compliance With The Designated Materials Regulation In The Provision Or Delivery Of Those Goods Obligated Under That Regulation. Please Refer To Recycle Nb's Website And The Designated Materials Regulation For Specifics. Payment Of Invoices Payment Of Invoices Is The Responsibility Of The Department Or Organization To Whom The Goods Are Shipped Or Services Are Supplied. Where The Estimated Value Of The Goods Or Services To Be Procured Is Below The Lowest Applicable Threshold Value Of Any Relevant Trade Agreement, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Lowest-priced Acceptable Bid Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Highest Scoring Acceptable Bid Submission Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. Where Permissible Under The Applicable Trade Agreements And The Regulation Under The Procurement Act, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. This Procurement Is Subject To The Provisions Of The Canadian Free Trade Agreement, The Canada-european Union Comprehensive Economic And Trade Agreement, The Agreement On Government Procurement Under The World Trade Organization And The Comprehensive And Progressive Agreement For Trans-pacific Partnership. No Totals Required.

Details: Description Invitation To Bid For The Procurement Of Various Ict Equipment 1. The Department Of Agriculture-regional Field Office 7, Will Conduct A Public Bidding Through Early Procurement Activities (epa) Of National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) And Intends To Apply The Sum Of Nine Hundred Ninety Four Thousand Pesos (₱994,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Ict Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture – Rfo 7 Is Conducting This Procurement Through The Early Procurement Activity (epa) For National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services Where The Procuring Entity (pe) Is Encouraged To Start Procurement Activity Short Of Award. 3. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract, For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e., Fy 2021), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Pe Will Evaluate The Bid Proposals And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget (i.e., Short Of Award); And C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Bid Validity Accordingly (that Is, Changing The Expiration Of The Original Bid Security). In Case Of The Bidder’s Refusal To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. 4. The Department Of Agriculture-regional Field Office 7 Now Invites Bids For The Procurement Of Various Ict Equipment With The Following Details/specifications: 1) 12 Units Printer, @ 12,000.00/unit Multi-function (print, Copy, Scan) With Wireless Connectivity, All Paper Sizes, Black & Colored, Refillable Ink 2) 10 Units Desktop Computer Set @ 50,000.00/unit Specifications: Intel Core I5-14400 (6 Cores, 16 Threads, Up To 4.7 Mhz, 20mb Cache) / Integrated Uhd Graphics 730 / Intel H60 Chipset / 8gb Ddrs 4800mhz Ram / 256gb |ssd M.2 2280 Pcle Ssd + 1tb Hdd / Wlan + Bluetooth 11ax, 2x2 + Bt5.1 /21" Display Monitor 3) 7 Units Laptop @ 50,000.00/unit Specifications: Windows 11 /amd Ryzen 7 7730u (up To 4.5 Ghz Max Boost Clock, 16 Mb L3 Cache, 8 Cores, 16 Threads)/ 16gb Ddr4-3200 Sdram (2 X 8 Gb)/512 Gb Pcle Nvme M.2 Ssd/ 15.6" Diagonal Fhd (1920 X 1080), Micro-edge, Anti-glare, 250 Nits, 45% Ntsc /amd Radeon Graphics; With Back Pack Bag Deliver To: Da-rfo 7 Mandaue City, Cebu / Research Division Delivery Of The Goods Is Required Within 30 Calendar Days From The Receipt Of Approved Notice To Proceed (ntp). Bidders Should Have Completed, Within Five Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 5. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 6. Prospective Bidders May Obtain Further Information From Department Of Agriculture- Regional Field Office 7- Bac 2 Secretariat Through The Contact Details Given Below And Inspect The Bidding Documents As Posted On The Philippine Government Electronic Procurement System (philgeps). 7. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12, 2024 From The Given Address Below And Upon Payment Of Non-refundable Bid Document Fee The Amount Of One Thousand Pesos (₱1,000.00) (based On Appendix 8 - Guidelines On The Sale Of Bidding Documents Of The 2016 Revised Irr Of 9184 Updated As Of January 31, 2023. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Which Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 8. The Department Of Agriculture-regional Field Office 7, Will Hold A Pre-bid Conference On November 20, 2024 -2:00 P.m. At Da Conference Room, Da Complex, Highway Maguikay, Mandaue City, Which Shall Be Open To Prospective Bidders. Electronic Pre-bidding May Not Available For This Procurement Opportunity. 9. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 2, 2024 - 10:00 A.m. Late Bids Shall Not Be Accepted. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. Bid Opening Shall Be On December 2, 2024 - 10:00 A.m. At Da-rfo 7 Conference Room, Da Complex, Highway Maguikay, Mandaue City. Bids Will Be Opened In The Presence Of The Bidders Or Bidder’s Authorized Representatives Who Choose To Attend The Activity. Electronic Bidding May Not Available For This Procurement Opportunity. 12. The Department Of Agriculture Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. The Department Of Agriculture Regional Field Office 7 (da-rfo 7) Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Bac 2 / Procurement Section Department Of Agriculture Regional Field Office-7 Telefax No. 032-2682698 Or 032-345-3483 November 12, 2024 (sgd.) Rtd Wilberto O. Castillo, Ph.d. Bac Chairperson

Details: Description Lot Procurement Of Security Guard Services For Dar Albay Provincial Office Covering January 16, 2025 To December 31, 2025 1 952,000.00 952,000.00 3 Uniformed Security Guards **************** Technical Specifications/terms Of Reference Security Agency Minimum Requirements 1. Valid And Updated License To Operate Issued By The Philippine National Police, Civil Security Group, Supervisory Office For Security Investigation Services (pnp-csg-sosia) 2. Certification That The Servicing Agency Is Operating For Atleast Three (3) Years In The Security Business Operations 3. Certification Conforming The List And Licenses (if Applicable) Of Tools And Equipments 4. Certification Conforming The List Of Personnels And Security Guards To Be Deployed. Atleast 3 Of Them Should Be Organic To The Service Provider. 5. Provide Copy Of Its Organizational Profile Together With The Recruitment And Selection Criteria In Hiring Personnel/security Guards The Above Mentioned Requirements Shall Be Submitted Together With Its Technical And Eligibility Documents Security Guard Minimum Requirements Must Be At Least A High School Graduate Good Moral Character And Reputation, Courteous, And Competent, Efficient, Alert And Without Criminal Or Police Records "physically And Mentally Fit And Not Less Than 21 Or More Than 60 Years Of Age And Through The Agency, Must Submit The Following Valid/updated Documents 1. Neuropsychiatric Exam 2. Nbi Clearance 3. Drug Test Results 4. X-ray Results 5. High School Diploma 6. Certificate Of Training" Duly Licensed, Bonded, Properly Screened And Cleared By Competent Government Agencies Tasked To Issue Clearances For Employment Must Always Wear The Proper Uniform And Has The Competency To Carry Firearms Which Shall Always Have The Sufficient Ammunition During His Tour Of Duty Holder Of Valid Security Officer License Issued By Pnp-csg-sosia Obligation Of The Security Personnel Maintain Peace And Order At The Aforementioned Building And Premises Of Dar Albay Provincial Office; To Protect And Safeguard The Properties From Theft, Pilferage, Robbery, Loss, Destruction Or Damages, To Prevent The Commission Of Crimes And Other Unlawful Acts, To Protect And Secure The Officers, Personnel/employees Of Darpo Including Its Visitors And Guests From Assault And All Forms Of Violence, Harassment, Threat Or Intimidation; To Maintain Constant Patrol On All Points Of The Building And Its Premises And To Follow Rules, Policies And Regulations From Darpo Albay Aimed At Maintaining Security And Safety. Minimum Security Equipment Requirements Operational, Functional, And Well-maintained Firearms With Live Ammunition (9mm Pistol, Shotgun) With Valid License In The Name Of The Security Agency (plus One (1) Magazine For Each Firearm) Handheld Radio With Valid Ntc License Uniform (which Includes Handcuffs, Atleast 20ml Pepper Spray, Rechargeable Heavy Duty Flash Lights With Atleast 5 Leds, Stainless Steel Whistle, First Aid Kit, Big Umbrella, Expandable Night Sticks Made Of Steel Or Pro Baton Made Of Wood) Security Plan Security Plan Including Investigation And Reporting Procedures And Safety Health Protocols. "payment Terms And Schedule " To Ensure Payment For The Salaries And Other Benefits In Favor Of The Security Guard (based On The Computation (see Annex A) And Will Adopt Any Increase Based On Dole Mandate). The Following Documents Shall Be Submitted On A Monthly Basis: "a. Copy Or Certified True Copy Of Payroll Journal Showing The Actual Salaries Collected And Received Including Other Benefits By The Security Guards For Each Month. B. Copy Or Certified Ture Copy Of Official Receipts For Sss, Philhealth, Sif And Pag-ibig Fund Remittances. C. Copy Or Certified True Copy Of Pay Slip Of The 13th Month Pay And Certification Of 5-day Incentive Leave One (1) Year Of Service." "other Terms And Conditions " The Security Guard On Duty Shall Work Eight (8) Hours Daily Including Saturdays, Sundays And Holidays The Security Guards Must Be Properly Knowledgeable Regarding Fire Safety Awareness And Emergency Procedures. The Security Guards Assigned Shall In No Way Be Employees Of Darpo Albay As They Are For All Intents And Purposes Employees Of A Private Security Agency. They Should Not Be Connected By Affinity Or Consanguinity To Any Dar Albay Employees. The Security Guards Shall Upon A Directive From Darpo Albay Management, Written Or Unwritten, Shall Inspect And/or Conduct Bodily Search Of Any Person Entering Or Leaving The Premises Darpo Albay. When Conducting Inspection And Bodily Search, The Guards Shall Exercise Utmost Courtesy Towards Any Persons Concerned So As Not To Unduly Antagonize Or Hurt Their Feelings, And Shall Preserve The Good Public Relations Of Darpo Albay And The Private Security Agency And Its Patrons. The Private Security Agency Shall Be Responsible And Liable For Any Loss Of Or Damage To Properties Including Injury Of Any Of The Officers And Employees Of Darpo Albay When It Happens Within The Premises Of The Latter Being Guarded. If Such Damage, Loss, Injury Or Death Is Due To The Fault, Negligence, Misconduct And/or Refusal Of The Security Guard (s) To Execute And Adhere Strictly To The Usual Precaution Or To Exercise The Necessary Diligence For Safeguarding Properties And Persons Called For The Nature Of The Business Of Darpo Albay, Except When Such Damage Or Loss Is Caused By Fortuitous Events. Any Loss Or Damage To Properties Must Be Reported In Writing By The Security Guard (s) On Duty Within Twenty-four (24) Hours From Knowledge Thereof. In The Event That Any Of The Property Being Guarded Moved Elsewhere, The Item Subject Thereof Must Be Recorded And Entered Into The Logbook By The Security Guard. They Shall Not Allow Any Properties Of Darpo Albay To Be Taken Out Of The Premises Without The Written Pass Or Authorization From Darpo Albay Authorized Representatives. The Performance Of Assigned Security Guards Is Subject To The Control And Supervision Of The Private Security Agency Relative To The Stipulated Services And Not To The Means And Method Of Accomplishing The Same. Darpo Albay May Require Replacement Of Any Security Guard Whose Conduct Is Unsatisfactory Or Prejudicial To The Interest As Determined By The Former. Security Guards Must Show Respect At All Times By Extending Courtesy Greetings To All Dar Officials, Personnel And Clientele. All Visitors Must Be Required To Sign In The Visitors Logbook And If Applicable, Be Directly Referred To Pacu. In No Way Should Visitors Be Allowed To Directly Proceed To The Office W/o Appropriate Identification In The Logbook. "security Guard Assigned Shall At All Times Require 1.) All Drivers Of Out-going Darpo Albay Vehicle - The Approved Trip Ticket And Vehicle Gate Pass As Applicable 2.) All Personnel Going Out The Office -the Employee Gate Pass. For Trip Ticket And Vehicle Gate Pass The Same Shall Bear The Approval By Any Of The Following: A.) Provincial Agrarian Reform Program Officer Ii B.) Chief Administrative Officer C.) Chief General Services Personnel Gate Pass Shall Be Approved By The Chief Of The Division Concerned, And By The Parpo As The Case May Be." After Office Hours, Office Building Including The Rooms Must Be Inspected By The Security Guard On Duty. All Doors Should Be Locked And All Lights, Air Conditioners And Computer Units Must Be Turned-off. Entry And Exit Of Personnel In The Office Premises Should Be Duly Recorded By The Security Guard On Duty. This Is To Ensure Proper Documentation If Ever Any Untoward Incident And/or Investigation Happens. Employee/s Coming To The Office During Saturdays And Sundays And Holidays Should Be Required To Present Authority As To Its Purpose Duly Approved By The Division Chief Concerned, Except On Emergency Cases Where The Purpose Is To Get Belongings Left By The Employees Concerned But Should Be Accompanied By The Guard On Duty. "attachment - Computation Schedule " Annex "a"

Details: Updated Attachment To Reflect A Change To Page 40, Removing The Incorrect Hrpo And To Highlight The Email Address For Submissions,ai2c_baa_submissions@army.mil Throughout The Attachment. updated Attachment To Reflect Title Change From W52p1j-23-b-ai2c To W519tc-24-s-ai2c. see Attached Baa For Full Details. this Broad Agency Announcement (baa), For The Army Artificial Intelligence Integration Center (ai2c), Is Issued Under The Provisions Of Paragraph 6.102(d)(2) And 35.016 Of The Federal Acquisition Regulation (far), Which Provides For The Acquisition Of Basic, Applied, And Advanced Research And That Part Of Development Not Related To The Development Of A Specific System Or Hardware Procurement. This Will Be Done Through The Competitive Selection Of Proposals, And 10 U.s.c. 4001, 10 U.s.c. 4021, And 10 U.s.c. 4022, Which Provide The Authorities For Issuing Awards Under This Announcement For Basic, Applied, And Advanced Research. Proposals Submitted In Response To This Baa And Selected For Award Are Considered To Be The Result Of Full And Open Competition And In Full Compliance With The Provisions Of Public Law 98-369, "the Competition In Contracting Act Of 1984" And Subsequent Amendments. the Army Artificial Intelligence Integration Center (ai2c) Is Seeking Artificial Intelligence Research And Development Whitepapers And Proposals In Support Of New Technologies And Translational Research-based Approaches That Support The Identification, Alignment, And Exploitation Of Basic, Applied, And Advanced Research. this Baa May Be Used To Award Far Based Instruments (e.g., Procurement Agreements) Or Instruments Not Subject To The Far (e.g., Grants, Cooperative Agreements, Technology Investment Agreements, And Other Transactions). Those Instruments Not Subject To The Far May Be Referred To As Assistance Agreements In This Baa. Ai2c Will Consider A Wide Range Of Funding Constructs Which Might Include, But Are Not Limited To, Government Funding, Cost Sharing, In-kind Labor Or Facility Sharing By All Parties, Or Any Other Allowable Mechanism. Applicants May Propose Cost Sharing Approaches, But They Are Not Required. Ai2c Envisions Opportunities To Engage In Other Types Of Collaboration Agreements Where No Funds Are Exchanged, Such As Cooperative Research And Development Agreements (cradas) Which Are Negotiated Separately From This Baa. to Be Eligible For An Award Under This Announcement, A Prospective Awardee Must Meet Certain Minimum Standards Pertaining To Financial Resources And Responsibility, Ability To Comply With The Performance Schedule, Past Performance, Integrity, Experience, Technical Capabilities, Operational Controls, And Facilities. In Accordance With Federal Statutes, Regulations, And Department Of Defense (dod) And Army Policies, No Person On Grounds Of Race, Color, Age, Sex, National Origin, Or Disability Shall Be Excluded From Participation In, Be Denied The Benefits Of, Or Be Subjected To Discrimination Under Any Program Or Activity Receiving Financial Assistance From The Army. Areas Of Interest 1. Autonomous Platforms the Army Is Interested In Research In Autonomous Ground And Air Vehicles, Which Must Operate In Open, Urban, And Cluttered Environments. Robotics And Autonomous Systems Regardless Of Their Missions Require Similar Concepts And Technologies Including: ability To Move In Cluttered, Irregular, Urban, And Underground Environments. ability To Move Effectively In Contested Environments And Survive Attacks. technologies To Enable Low Electromagnetic And Physical Profiles. architectures To Enable Autonomous Learning And Adaptation Under Dynamic Conditions. sensing Methods To Detect Obscured And Small Targets And To Characterize Terrain Obstacles. autonomous Ground And Air Structures, Propulsion, And Mobility Components. technologies To Significantly Reduce Logistical Burdens And/or Make Them Autonomous. ability To Have Multiple Land And Air-based Platforms Collaborate To Accomplish Complex Goals Autonomously. 2. Artificial Intelligence And Machine Learning Algorithms (ai/ml) the Army Is Interested In Core Algorithmic Improvements Such As: scaling Machine Learning Methods To Operate On Larger Data Sets In Shorter Periods Of Time And/or With Reduced Computation, Memory, And/or Power Requirements. improving The Data Efficiency Of Learning Algorithms (e.g., Low-shot, Zero- Shot Learning). developing Foundation Models Across Multiple Modalities Such As Language, Vision, And Segmentation. adapting Existing Foundation Models To Novel Tasks. improving Methods For Collecting, Labeling, Managing, And Tracking Data And The Models Learned From Them. 3. Ai/ml Decision Support the Army Is Interested In Research On Ai Algorithms And Systems To Improve Decision Making Across All Echelons Including: core Reinforcement Learning, Game Theoretic, Optimal Control Algorithms. algorithms For Improved Online, Operational Decision Making. algorithms For Improved Offline Strategic Planning Including Tactics And Portfolio Optimization Of Assets. algorithms For Increased Autonomy And Speed In Decision Making. 4. Human-ai Integration the Army Is Interested In Ai/ml Research In Areas Which Can Reduce The Cognitive Burden On Humans And Improve Overall Performance Through Human-machine Integration. Ai/ml Research Is Needed In Areas Such As: speech And Language Algorithms That Support More Efficient Human-machine Integration. algorithms That Raise The Level Of Autonomy In Systems (i.e., Increase The Number And Size Of Tasks That Can Be Accomplished Without Human Input And/or Reduce The Level Of Details Required In Human Commands To Machines). methods To Process And Summarize Large Amounts Of Data For Human Analysis. robust And Rigorous Methods For Evaluating The Outputs Of Complex Ai Systems. methods For Understanding And Explaining Ai/ml Results And The Uncertainty Of Those Results. understanding The Impacts Of Ai/ml On Human Decision Making. ethical Considerations For Human-machine Integrated Formations In High Risk And Complex Environments. quantitative Approaches To Measure Ethical Compliance Of Ai Systems. methods To Train Users And Developers At Various Technical Skill-levels To Interact And Use Ai And Ml More Effectively. techniques To Investigate Human And Non-human Behavior And Interactions In Various Online Social Settings. 5. Synthetic Environments the Army Is Interested In Research That Enables Improved Situational Awareness And The Visualization And Navigation Of Large Data Sets To Enhance Operational Activities And Training And Readiness. Research Is Needed In The Visualization Of Data In Following Areas: novel Visualization And Synthetic Environment Approaches To Enable Improved Training synthetic Environments And Networked Instrumentation Approaches For Virtual-live Validation Of Concepts And Prototypes 6. Distributed Ai the Army Is Interested In Effectively Leveraging Modern Ai And Ml Techniques For Both Enterprise And Tactical Applications. Research Is Needed In The Areas Related To The Following: methods For Governing A Large Portfolio Of Distributed Ml Models. algorithms For Efficiently Leveraging Hardware Across A Large, Heterogeneous Network Of Enterprise And Tactical Computer Systems For Various Ai And Ml Tasks. methods For Effective Multi-agent Collaboration And Multi-agent Systems. techniques To Attack And Compromise Ai And Ml Systems. techniques And Best Practices For Defending Ai And Ml Models And Infrastructure From Attacks. improve Ml Performance Of Inference And Training On Small, Rugged Edge Devices. cyber Protection Technologies, Methodologies, And Concepts To Protect Army Systems, Especially In The Context Of Distributed Systems. 7. Underpinning Methodologies the Army Is Interested In Methodologies, Frameworks, Tools, Facilities, Techniques, And Experimentation Concepts, Which Underpin And Enable Advanced Research And Development, Including Those Which Enhance The Following: collection, Standardization, Transformation, And Maintenance Of Data To Focus Research And Validate Concepts. rapid Modeling, Development, And Assessment Of Technologies Across Widely Distributed Research Teams. integrate Innovative Technology Applications Into Current Or Future Warfighting Systems, Applications, And Analysis Systems To Assess The Potential Operational Effectiveness Of Novel New Technology Elements. frameworks That Integrate Testing And Evaluation Into The Artificial Intelligence Workflow. 8. Special Topics as A Part Of This Baa, Ai2c Will Post Specific Areas With Strong Potential For Funding As An Amendment To This Baa On Sam.gov. These Topics Will Generally Have Clear Deadlines For Submission And May Have Other Specific Preparation Guidelines.

Details: Description Clip, Backfold, All Metal, Clamping 25mm 1 Piece ₱31.00 Clip, Backfold, All Metal, Clamping 32mm 1 Piece ₱43.00 Correction Fluid, Water Based With Metal Tip, Aaa Brand 5 Pieces ₱230.00 Correction Tape 1 Piece ₱55.00 Fastener, Plastic Coated, 8 1/2 Long 100's 1 Piece ₱150.00 Folder, Expanding, For Legal Documents, Green 5 Pieces ₱155.00 Folder, Tagboard, Ordinary, Long 1 Pieces ₱508.00 Index Card-market 30 Pieces ₱420.00 Ink, Permanent Marker, Black, Pilot Brand, Or Equal Brand 1 Bottle ₱141.00 Ink, Stamp Pad, With Applicator, Black 1 Bottle ₱160.00 Marker, Florescent, 3 Asstd. Color 9stabilooe Equal Brand 1 Set ₱88.00 Marking Pen, Permanent, Black Fine Pilot Or Equal Brand 3 Pieces ₱234.00 Marking Pen, Whiteboard, Black, Fine Pilot Or Equal Brand 2 Pieces ₱192.00 Note Pad, 2x2" Stick On, 72gsm, Long Size, 100 Sheets 2 Pieces ₱128.00 Paper, Multi Copy, 70gsm, Long Size, 500 Sheets 6 Reams ₱2,166.00 Paper, Multi Copy, 70gsm, A4 Size, 500 Sheets 9 Reams ₱2,772.00 Paper, Multi Copy, 80gsm, Short 500 Sheets 3 Reams ₱1,011.00 Pen, Ballpoint, Ordinary, Black 40 Pieces ₱360.00 Pen, Ballpoint, Ordinary, Blue 1 Piece ₱9.00 Pen, Ballpoint, Fine Point, Pilot, Equal Brand Black 6 Pieces ₱246.00 Pen, Ballpoint, Fine Point, Pilot, Equal Brand Brand, Black 9 Pieces ₱189.00 Pencil, Lead With Eraser, Wood Case, #1 12"s 1 Boxes ₱133.00 Record Book, 100 Pages, 214mmx278mm 1 Book ₱102.00 Record Book, 200 Pages, 214mmx278mm 1 Book ₱128.00 Record Book, 300 Pages, 214mmx278mm 1 Book ₱143.00 Record Book 500 Pages 1 Book ₱165.00 Ruler, Plastic, 12" 1 Piece ₱17.00 Scissor 1 Piece ₱120.00 Signpen, Black, 1.0 Pilot Or Equal Brand 3 Pieces ₱336.00 Signpen, V-5 Extra Fine, Pilot Or Equal Brand, Black 3 Pieces ₱288.00 Signpen, H-tech, V10 Grip, Black, Pilot Or Equal Brand 1 Piece ₱120.00 Signpen, Black, 0.3, (pilot G-tech Or Equal Brand) 1 Piece ₱109.00 Stamp Pad, Felt Pad 100mmx140mm 1 Piece ₱66.00 Staple Wire #35, 5000pcs. 2 Pieces ₱162.00 Staple Wire Remover, Plier Type, Stainless 1 Pieces ₱124.00 Staple No. 25, Heavy Duty, With Remover 1 Piece ₱502.00 Tape, Double Sided, 1", 50mm 2 Rolls ₱152.00 Tape, Transparent, 1/2, 50mm 2 Rolls ₱114.00 Tape, Transparent, 2'50mm 2 Rolls ₱220.00 Bluetooth Mouse With Scroll 1 Piece ₱500.00 Computer Keyboard Usb Type 1 Piece ₱536.00 Flashdrive, 64gb Capacity, 1 Piece In Individual Blister Pack 1 Piece ₱576.00 Mousepad 1 Piece ₱165.00 Print All You Can 1 Package ₱9,600.00 Battery Size C 2's 1 Pack ₱149.00 Battery, Dry Cell, Aa, 2pc./pack 3 Packs ₱300.00 Battery, Dry Cell Aaa 2's 1 Pack ₱130.00 Battery, Drycell D, 1.5 Volts 1 Pack ₱129.00 Battery, Rechargeable Aa's 2 Pieces ₱2,424.00 Circuit Breaker 30 Amp 1 Piece ₱1,212.00 Flashlight, Rechargeable 1 Piece ₱763.00 Flourescent, Lightning Fixture 20 Watts, 220v With Ballast And 2 Pieces ₱910.00 Flourescent, Lightning Fixture 40 Watts, 220v With Ballast And 1 Piece ₱484.00 Padlock, 40mm, Hd 1 Piece ₱461.00 Padlock, Heavy Duty, Medium 1 Piece ₱299.00 Tape, Electrical, 50/ Roll, Big 3 Pieces ₱144.00 Airfreshner, Automatic Refill 269ml (lavander) 1 Piece ₱364.00 Anti-bacterial Liquidhand Soap Refreshing Moisturishing 2 Pieces ₱242.00 Bathroom Soap, Hand Soap, Liquid 1 Ltr. 1 Pieces ₱551.00 Bathroom Soap, Liquid Dispenser, 221ml 1 Pieces ₱204.00 Broom, Soft Tambo 1 Piece ₱242.00 Broom, Stick, Tingting, Irok 30 Pieces ₱4,800.00 Chlorox (zonrox), 1892ml Original 2 Gallons ₱330.00 Detergent Bar 380g/bar 1 Bar ₱44.00 Dipper With Handle 2 Piece ₱110.00 Dishwashing Liquid, 250ml 1 Bottle ₱112.00 Dishwashing Liquid, 750ml 1 Bottle ₱176.00 Disinfectant Spray Lusol Or Equal Brand 170ml Red 3 Bottle ₱1,197.00 Disinfectant Spray Lusol Or Equal Brand 170ml White 3 Bottle ₱1,197.00 Disposable Masks 3 Boxes ₱471.00 Doormat, Cloth, Lala, Square 1 Piece ₱77.00 Dustpan, Plastic, Pansize: 23cmx24cm Approx., Handle Lenght 1 Piece ₱61.00 Empty Sack, Big 46 Pieces ₱920.00 Furniture Cleaner, Aerol Type, 300ml 1 Cans ₱204.00 Garbage Bag Xl (green), 50's 3 Packs ₱645.00 Garbage Bag Xl (yellow), 50's 5 Packs ₱1,075.00 Glass Cleaner 500ml With Spray 1 Bottle ₱260.00 Glove, Cotton And Rubber Palm 60 Pairs ₱4,380.00 Gloves, Rubber, Black 15 Pairs ₱3,165.00 Gloves, Disposable S7 50's 2 Boxes ₱558.00 Hand Sanitizer, 500ml 1 Bottle ₱345.00 Insecticide Spray ( Baygon Or Equal Brand) 1 Cans ₱362.00 Rags, Round, All Cotton 1 Bundle ₱66.00 Rainboot, Assorted Size 3 Pairs ₱2,661.00 Raincoat Assorted Size 3 Pieces ₱2,163.00 Scouring Pad 3's (scotch Brite Or Equal Brand) 1 Packs ₱179.00 Tape, Duct Tape 2' 2 Pieces ₱474.00 Toilet Deodorant Cake, 3's 1 Pack ₱213.00 Toilet Tissue, 12 Rolls, 2ply 2 Pack ₱552.00 Trash Can With Cover Large Plastic 1 Piece ₱532.00