Chain Link Tenders

Description: CATEGORY: STUD LINK CHAIN CABLE 27 5 MTR DIA 34MM FOR NOPV N4010 004200 , D TYPE JOINING SHCKLE DIA 34MM FOR NOPV N4030 003970 , ADAPTOR PIECE 34MM DIA FOR NOPV N4030 003972 , ANCHOR SHACKLE DIA 34MM FOR NOPV N4030 003969 , CHAIN CABLE FULL SIZE 17 5MM LENGTH 27 5M N4010 002792 , CHAIN CABLE HALF SIZE 17 5MM LENGTH 13 75M N4010 003554 , LUGLESS JOINING SHACKLE 17 5MM N4030 003555 , ANCHOR SHACKLE SIZE 17 5MM N4030 003519 , BLAKE STOPPER SIZE 17 5MM N4030 003375 , CHAIN CABLE FULL SIZE 26 MM LENGTH 27 5M N4010 002798 , SWIVEL ADAPTOR SIZE 26MM N4030 003344 , SWIVEL ADAPTOR SIZE 38MM N4030 003349 , SCREW STOPPER SIZE 38MM N4030 003493 , ANCHOR SHACKLE SIZE 48MM GR 3 N4030 003534 , SWIVEL ADAPTOR PIECE TO SUIT FS CHAIN CABLE DIA 35MM GR 2 N4030 003348

Details: U.s. Government united States Department Of Agriculture (usda) Seeks To Lease The Following Space: state: New York city: Avoca delineated Area: Delineated Area (city, State)- Steuben County / Avoca, Ny northern Boundary- Michigan Hollow Rd/hemlock Rd southern Boundary- State Route Ny-415 eastern Boundary- State Route Ny-53 western Boundary- Michigan Hollow Rd (961j) minimum Sq. Ft. (aboa): 12,000 maximum Sq. Ft. (aboa): 12,350 space Type: [office, Warehouse] parking Spaces (total): 13 parking Spaces (surface): 0 parking Spaces (structured): 0 parking Spaces (reserved): 13 full Term: 20 firm Term: 10 option Term: 0 additional Requirements: 1,500 S.f. Ware Yard. Warehouse Type Space With Heated Shop Area For Storage Of Specialized Treatment Equipment. Scientific Support Space And Specialized Room With Air Filtration System For Dust Control From Processing Soil Samples, External Soil Pit (for Soil Sample Effluent Disposal) And Drain Field Adjacent To Building That Can Handle 75,000 Gallons Of Wastewater From Soil Lab. Adjacent Property Required For A Usda Golden Nematode Program Soil Pit Area, Enclosed With 6’ Chain Link Fence With Two 12’ Gates (one On Each Side Of Pit) To Allow Periodic Excavation Of Soil Pit. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced Lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance Floodplain (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far). ). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b. expressions Of Interest Due: [february 17, 2025] market Survey (estimated): [march 17, 2025] occupancy (estimated): January 1, 2026] send Expressions Of Interest To: name/title: [gary M. Crook] email Address: Gary.m.crook@usda.gov government Contact Information lease Contracting Officer Gary M. Crook leasing Specialist Gary M. Crook

Description: CATEGORY: ROUND LINK CHAIN AS PER DRG. NO. NALCO_MECH_SPP_4315- 10103000190_1_1000067503_UOM_EA , GUIDE WHEEL SHAFT WITH 2 NUTS FOR GUIDE WHEEL ASSLY AS PER DRAWING NO. NALCO_MECH_SPP_5001- 10103001000_2_1000067503_UOM_EA , Body_Guide Wheel Cover for the Guide Wheel Assy As Per Drg No NALCO_MECH_SPP_5006.- 10103901000_3_1000067503_UOM_EA , U-LINK SHACKLE WITH LOCK NUTS AS PER DRAWING NO. NALCO_MECH_MISC_4323- 10103901020_4_1000067503_UOM_EA , OUTER RING OF GUIDE WHEEL COVER As Per Drawing No. NALCO_MECH_MISC_5155- 10103910050_5_1000067503_UOM_EA , SPROCKET TEETH FOR DRIVE SHAFT AS PER ATTACHED DRAWING NO. NALCO_MECH_SPP_5721- 10103910410_6_1000067503_UOM_EA , Complete assembly of Tail pulley AS PER DRAWING NO. NALCO_MECH_MISC_4320- 10103910450_7_1000067503_UOM_EA , COMPLETE ASSEMBLY OF SUBMERGED PULLEY AS PER DRAWING NO. NALCO_SPP_MISC_4412- 10103910460_8_1000067503_UOM_EA , BEARING COVER _ BLIND FLANGE FOR GUIDE WHEEL ASSLY AS PER ITEM NO.-1 OF DRAWING NO. NALCO_SPP_MISC_4412- 10103914580_9_1000067503_UOM_EA , Scrapper Bar with both side liner as per drawing no. NALCO_MECH_SPP_2559- 10103914720_10_1000067503_UOM_EA , Bar connector with fasteners for scraper conveyor as per drawing no.NALCO_MECH_MISC_4314- 10103914890_11_1000067503_UOM_EA , ROUND LINK CHAIN AS PER DRG. NO. NALCO_MECH_SPP_4315- 10103914960_12_1000067503_UOM_EA , DRIVING SPROCKET AS PER DRG. NO. NALCO_SGP_APH_033- 14701001110_13_1000067503_UOM_EA , COMPLETE BEARING HOUSHING ASSEMBLY AS PER DRG.NO. NALCO_MECH_SGP_977 AND NALCO_SPP_MISC_4418- 14701001660_14_1000067503_UOM_ST , SPUR GEAR FITTED WITH KEY AND ALLEN SCREW AS PER DRG.NO.NALCO_MECH_SGP_947- 14701001800_15_1000067503_UOM_EA , ASSEMBLY OF DRIVING AND DRIVEN SHAFT ASSY AS PER DRAWING REF - NALCO_MECH_SGP_1318- 14701003040_16_1000067503_UOM_ST , GLAND FOLLOWER AS PER DRG.NO.NALCO_MECH_SGP_1318 - 14701005110_17_1000067503_UOM_EA , SPILT LANTERN RING AS PER DRG.NO.NALCO_MECH_SGP_1318- 14701005280_18_1000067503_UOM_EA , WEAR RING AS PER DRG.NO.NALCO_MECH_SGP_1318- 14701005350_19_1000067503_UOM_EA , SHAFT SLEEVE AS PER DRG.NO.NALCO_MECH_SGP_1318- 14701005660_20_1000067503_UOM_EA , COMPLETE ASSY OF CARRIAGE WHEEL AS PER DRG. NO.NALCO_MECH_ SGP_4000-14701011520_21_1000067503_UOM_EA

Description: P.l No.98327008.scrap Machinery Parts Consisting Of Ci Shock Absorber Cleaning Tank , Hydraulic Dimensional Lifting Table, Shaft Pinion , Gears Etc. Hydraulic Lifting Table, Allied System Consisting Hyde Gear Pump Assy, Link Chain Etc. Moulding Box & Other Foundry Components, C&w Item, Gear Pump, Assy, Dcr Valve Assly, Loco Component, M/c Parts, Turbo, M/c Parts, Tower Car, Like Compressor, Push Rod Etc. Traverse Beam, Craper, Chain Finger Plate Etc. Impeller, Sleav, Bush, Shaft Etc. Snatch Block & Hook, Ring & Hook Of Slings Etc, Gear Box, Gear, Pulley, Deep Trolley, Wheel, Hook, Brake Shoe Etc, Various Wire Plate, Chain, Eigi Compressor Turbo Part, T/beam Thrust Plate, Wear Plate, Lifting Roller, Chute Assly, Clutch Plate, Ci Slice Valve, Vibration Shaft, Lifting Roller, Expresser, Forges Smith Circular Ci Block Stand, Tamping Tools Broken, Ci Stand For Iron Bar, Balance Weight, Ci Bases And Cover Of Various Type Of Machines, Ms Slab, Ms Base Etc. Qty-57mt. Location- West Of Vm Road In Ncb-21. Nb :(1) Cutting Is Allowed For Loading Purpose Only. (2)delivery To Be Made In Actual Weighment Basis Through Lorry.

Description: 1: Micro Mist Lubricator Norgren L73m-3gp-etn. - 6 Ea 2: Drive Shaft 687.15 Flange 1 Din100 6x8,2 Mm, Pn; 150041043 For Kroll Recycler Unit. - 6 Ea 3: Cover Seal ظ1800 Perbunan ظ 42x18, Pn; 1300400105 For Kroll Recycler Unit. - 3 Ea 4: Hydraulic Motor Mr315c, Shaft 25mm, 2 Hole Mounting Flange. - 7 Ea 5: Clevis With Folding Spring Bolt Igubal Complete Pn;1000000251 For Kroll Recycler Unit. - 10 Ea 6: Rotating Joint For Hose Reel 1-1/2" , Part No:180000006 For Kroll Recycler Unit - 6 Ea 7: Guide Rail Rgk Cp 8 Green, For Round Steel Link Chain 8mm, Din 766 Cut To 2000mm Lg. Pn; 130150401 For Kroll Recycler Unit. - 6 Ea 8: Zd 1 H 100/55-530 Standard Cylinder With Clevis, Pn; 210030126, For Kroll Recycler Unit. - 2 Ea 9: Pneumatic Cylinder With Male Thread And Nut On Piston Rod M12 X 1.25 22 Lg. 50mm Stroke, Type; Pra/182100/450 Stat. Code;84123100, Part No;200120566 For Kroll Recycler Unit. - 1 Ea 10: Chain Wheel Sprocket, Pn;230180033 For Kroll Recycler Unit. - 1 Ea

Description: 1: [111-08625] Link Chain Nics 7205 631-10559+clip Retaining Ncss 720s 631-18037+ Connecting Pin W/nm Clip 631-10558-002 (set Of Chain 10ft)-polychem - 70 St 2: [230-01097] Collector Flights 5"x8"362" 641-20011-polychem - 37 Ea 3: [111-07658] Wear Shoe 678-01191 (urn W/lug)-polychem - 148 Ea 4: [111-07659] Wear Shoe Carrying Box Flight 678-16397 - 136 Ea 5: [111-06890] Wear Shoe Return W/lug Blue Nylon 6-6.p/n:678-01191-blu - 148 Ea 6: [111-07663] Wear Strip 3/8" X 2-5/8" X 10ft Long, Uhmw-pe P/n: 10000286-001 - 156 Ea 7: [111-07655] Sprocket Nh78,40t,5.310"b 5.625" Offst 661-10609-233 - 4 Ea 8: [111-07657] Sprocket 17t, 720, Solid, Idler Stub Shaft, 5.34? Bore , Pa6.p/n:10000200-001 - 6 Ea 9: [111-07662] Sprocket Nh78 7t Solid 661-10641-034 - 6 Ea 10: [111-07671] Shaft Circlip 316ss Mat 3/8" 659-16426-008 - 400 Ea 11: [111-08018] Bearing P/n:10000213 Chn/720/atch/ult/brg - 252 Ea 12: [111-06888] Sprocket 23t 660-10584-205-polychem - 2 Ea

Description: CATEGORY: DUPLEX SPROCKET 48 TEETH , DUPLEX SPROCKET 38 TEETH , DUPLEX SPROCKET 32 TEETH , DUPLEX SPROCKET 28 TEETH , DUPLEX SPROCKET 24 TEETH , DUPLEX SPROCKET 22 TEETH , DUPLEX SPROCKET 18 TEETH , SPROCKET 16 TEETH 60 MM BORE , SPROCKET 18 TEETH 60 MM BORE , SPROCKET 14 TEETH 60 MM BORE , SPROCKET BUSH TYPE 8 TEETH , SPROCKET 14 TEETH 65 MM BORE , SHAFT 60X750 MM , SHAFT 60X840 MM , SHAFT 40X380 MM , SHAFT 65X750 MM , DUPLEX CHAIN , COUNTER WEIGHT SET , TEFLON E PLATE , UHMWPE STRIP 1000X40X10 MM , UHMWPE STRIP 1000X50X5 MM , UHMWPE STRIP 2500 MM , STOPPER ROLLER DIA 60 MM , DOUBLE STOPPER PERPENDICULAR 50X80 MM , DOUBLE STOPPER PIVOT 50X80 MM , DRAG CHAIN 25X35XR50 , DRAG CHAIN 25X35XR40 , CONVEYOR GASKET RUBBER , RIVET PAIN CONVEYOR CHAIN , SINGLE LINK DUPLEX CHAIN , NTN 212 PLUMMER BEARING , CAROUSAL CENTRING ARM , FILLING SCALE ADJUSTMENT BOLT , FILLING SCALE BUSH , SKF BEARING 6304 2Z , INTRODUCTION LINEAR ROD , EJECTION LINEAR ROD , LINEAR BEARING DIA 30 MM LENTH 45 MM , GD PT CLAMPING ROLLER , GD PT CLAMPING PLATE , TENSION BLOCK D30 , GD PT CENTERING BUSH , GD PT SHAFT FOR GUIDANCE , BLOC FOR GUIDANCE , GD PT YOKE PLATE , GD LOWER BELL , HAND LEVER OPTED DETENT DS255HD61 , PNEUMATIC DRILLING MACHINE 12 MM , HSS DRILL BIT SET , HAMMERING DRILL BIT SET 16 MM , HAMMERING DRILL BIT SET 12 MM , HAMMERING DRILL BIT SET 6 MM , ELBOW CONNECTOR HALF INCH THREADED , T CONNECTOR HALF INCH THREADED , 1 INCH BARREL NIPPLE 300 MM , 40 MM THREADED SOCKET GI , TEE 40X25 MM THREADED GI , TEE 40X40 MM THREADED GI , NIPPLE 50MM THREADED GI , PIPE WRENCH 24 INCH , UNION 40 MM THREADED GI , HACKSAW BLADE 300 MM , PAINT REMOVER , HOT AIR SEALING CUP , HOT AIR SEALING HOSE , METAL JAW COUPLING L90 , METAL JAW COUPLING L100 , METAL JAW COUPLING L110 , METAL JAW COUPLING L150 , STAR BUSH COUPLING L110 , STAR BUSH COUPLING L100 , STAR BUSH COUPLING L150 , STAR BUSH COUPLING L90 , ALLEN BOLT M6X30 MM , ALLEN BOLT M8X40 MM , ANCHOR BOLT 16X100 , ANCHOR BOLT 12X100 , STUD M12X100 MM , STUD M16X100 MM , HEXAGONAL BOLT M10X40 MM , HEXAGONAL BOLT M8X40 MM , HEXAGONAL BOLT M8X75 MM , HEXAGONAL BOLT M10X150 MM , HEXAGONAL BOLT M8X150 MM , HEAD BOLT HALF THREADED M16X75 MM , CSK ALLEN HEAD M6X20 MM , CSK ALLEN HEAD M8X20 MM , LOCK NUT M6 , LOCK NUT M8 , LOCK NUT M10 , HEX NUT M10 , WASHER M10 , BALL VALVE 2 INCH CLASS 150 , BALL VALVE 1 INCH CLASS 150 , BALL VALVE 3 BY 4 INCH CLASS 150 , BALL VALVE HALF INCH CLASS 150 , BENCH VICE HEAVY DUTY , CABLE TIE 150X3 MM , CABLE TIE 200X3 MM , CABLE TIE 250X3 MM , CABLE TIE 300X3 MM , WD 40 SPRAY , LOCTITE 542 50 ML , ELECTRO SPRAY

Details: CATEGORY: HAND BRAKE ASSY , DRANG LINK , CHAIN AND SPROCKET SET , CLUTCH CABLE ASSY , OIL FILTER , FAN BELT 8PK 1155 , FAN BELT , AIR FILTER ELEMENT

Details: The Health And Human Services Commission, For And On Behalf Ofits Health And Specialty Care System Division, Is Soliciting Competitive Sealedproposals For Selection Of A General Contractor (“contractor”) To Providegeneral Construction And Construction Administration Services To The Owner For Project No. 24-012-rsc, Sh - Building 515 Courtyard Fencing And Expansion (the“project”), In Accordance With The Terms, Conditions, And Requirements Setforth In This Solicitation. This Solicitation Is Being Issued To Select A Contractor Forthe Project As Provided By Texas Government Code, Section 2155.144 (b-2) And Chapter 2269, Subchapter D. Project Location, Summary, And Budget Project Location: Rio Grande State Center 1404 S Rangerville Rd, Building 515 Harlingen, Tx 78552 Project Summary: The Scope Of Work Includes, But Is Notlimited To, The Following: Existing Patio Anti-climb Fencing To Be Installed With 1”chain-link At 10’ High And Include Two Pedestrian Gates At Connecting Concretewalks. Courtyard Expansion To Include Perimeter Anti-climb Fencing, Plantings,shade Canopies, Concrete Walk Connections, Open Playing Field, Basketballcourt, Pedestrian Gates, And Maintenance Access Gates. For Complete Project Information, Refer To Attachments H1,project Drawings, And H2, Project Specifications, To Exhibit C. Project Estimate: The Approximate Cost For Constructionof The Project Is $548,910.00. Optional Pre-proposal Webinar And Mandatory Jobsitewalkthroughs Hhsc Will Conduct One (1) Optional Pre-proposal Webinarthat Will Be Held At The Date And Time Described Below. Attendance At Thepre-proposal Webinar Is Optional. Attendance Atone (1) Site Visit Is Mandatory. Optional Pre-proposal Webinar: May 7, 2025 At 2:00 P.m. Central Time.please Register For The Webinar At: Https://attendee.gotowebinar.com/register/3290799165916362079. After Registering, Youwill Receive A Confirmation Email Containing Information About Joining Thewebinar. Mandatory Jobsitewalkthroughs: All Respondents Arerequired To Attend One Facility Site Visit As Specified In Section 2.2(schedule Of Events). Potential Respondents Should Be Prepared To Complete Oneof The Scheduled Tours; Additional Tours Will Not Be Offered. Facility Site Visit Location Rio Grande State Center 1404 S Rangerville Rd, Building 515 Harlingen, Tx 78552 Facility Site Visit Schedule: A. Site Visit No. 1: May 8, 2025, At 1:00 P.m.central Time B. Site Visit No. 2: May 9, 2025, At 1:00 P.m.central Time Schedule Of Events · Issuance Of The Rfp: April 30, 2025 · Optional Pre-proposal Webinar: May 7, 2025, 2:00 P.m. Central Time · Mandatory Jobsite Walkthrough #1: May 8, 2025, 1:00 P.m. Central Time Or · Mandatory Jobsite Walkthrough #2: May 9, 2025, 1:00 P.m. Central Time · Deadline For Submitting Questions: May 16,2025, By 5:00 P.m. Central Time · Deadline For Courtesy Hsp Review: May 16,2025, By 5:00 P.m. Central Time · Deadline For Submission Of Proposals: June 19, 2025, By 10:30 A.m. Central Time · Deadline For Submission Of Hsp: June 20, 2025, By 10:30 A.m. Central Time · Opening Of Proposals: June 23, 2025, At 10:30 A.m. Central Time · Anticipated Notice Of Award: August 13, 2025 · Anticipated Contract Start Date: November 11, 2025

Description: 74080623 safety Chain To Be As Per Is 3076:1984 Grade T (8) Or Latest. The Specifications As Issued B y Rdso Are To Be Adhered To In Their Entirety Except That The Nominal Size (thickness) Of The Short Link Cha in Is To Be 13 Mm (?0.5mm) To 14 Mm (?0.5 Mm) And Long Links At Ends With Ring/suitable Locking Arrange ment For Padlocking Is To Be Of The Length Of 4.5 Meters. Further, The Length Of The Short Link Is To Be 60 M m (12.5 X 4 +10 Mm Tolerance) To 70 Mm (14.5 X 4+12 Mm Tolerance) And The Width Of The Short-link Cha in Shall Be 40 Mm (12.5 Mm X 3+2.5 Mm Tolerance) To 46 Mm (14.5 Min X 3+2.5 Mm Tolerance). These A re Electrically Welded Round Steel Short Link Chains, Fully Heat Treated And Tested And Comply With The Gen eral Conditions Of Acceptance Of Iso 1834 Or Latest. The Sizes Range From 5 To 45 Mm. (based On User Req uirement). The Steel Used Shall Be Produced By The Open Hearth Or Electric Process, Or By An Oxygen Blow process. It Shall Be Steel Alloy. Marking Shall Be Done As Per Is 3076:1984 Grade T(8) Or Latest. Supplier S hall Supply A Certificate Of Test And Examination Carried Out By The Government Owned Lab Or Nabl Approv ed Labs With Every Supply Of Chain. There Should Be Name Of The Chain Maker, Grade Of Material, Size Of Ch ain, Identification Marking, Proof Force Applied To The Whole Chain. No. Of Test Sample Taken, Breaking Forc e Of Each Sample, Total Ultimate Elongation At Fracture, During Manufacture The Heat Treated Chain Shall B e Subjected To Force Of 60% Of The Minimum Breaking Force. [ Warranty Period: 30 Months After The Dat e Of Delivery ] ] consignee All Sm On Aii Div., Nwr Rajasthan 350.00 Numbers inspection Details Stage Inspection Not Required