Chain Link Tenders

Details: 1.Providing Chain link fancing At Village Kumbefal Tq Khamgaon Dist Buldhana 2.Construction of Paver Block Road At Village Kumbefal Tq Khamgaon Dist Buldhana 3.Providing And Spreading Murum At Village Kumbefal Tq Khamgaon Dist Buldhana 4.Construction of Toilet Block for Z.P School At Village Kumbefal Tq Khamgaon Dist Buldhana 5.Construction of Compound Wall For Z.P. School At Village Kumbefal Tq Khamgaon Dist Buldhana 6.Construction of Toilet Block For Anganwadi At Village Kumbefal Tq Khamgaon Dist Buldhana 7.Construction of Drinking Water Tank for Cattle At Village Kumbefal Tq Khamgaon Dist Buldhana 8.Construction of Cement Concrete Drain At Village Kumbefal Tq Khamgaon Dist Buldhana 9.Construction of Paver Block Road At Village Kumbefal Tq Khamgaon Dist Buldhana 10.Cosntruction of Internal Cement Drain At Village Kumbefal Tq Khamgaon Dist Buldhana

Description: Proposed Procurement For Nsn 4010012079572 Link,chain,end: line 0001 Qty 1 Ui Ea Deliver To: Trident Refit Facility By: 0020 Days Ado line 0002 Qty 2 Ui Ea Deliver To: Naval Weapons Systems Support Mech By: 0020 Days Ado approved Sources Are 50194 803-6397316; 83644 82021-03001; 96169 4674716-0019. the Solicitation Is An Rfq And Will Be Available At The Link Provided In This Notice. Hard Copies Of This Solicitation Are Not Available. Specifications, Plans, Or Drawings Are Not Available. all Responsible Sources May Submit A Quote Which, If Timely Received, Shall Be Considered. quotes Must Be Submitted Electronically.

Description: CATEGORY: LOCK RING FOR HOLES, DESIGNATION N5-10-16 (ARTICLE NO. 10-299-118) TO BOFORS STD. TABLE NO N5-10 , CHAIN WITH SEMI LONG LINKS GLASS 2 DRG NO. N10-5-2.5 ART. NO 10301627 , CLEAT REAR TO ARTICLE NO. 6394152 , PLATE TO PART NO. 6298985 , HANDLE RIGHT TO PART NO. 4073014 , HANDLE LEFT TO PART NO. 4072731

Details: Construction Of Lift Irrigation Scheme To Fill Tanks In Hadya And Other Villages Under Varuna Constituency In Nanjanagudu Taluk Of Mysuru District Including Detailed Investigation & Conducting Survey, Design And Construction Of Civil Works Such As Intake Arrangement, Jack Well Cum Pump House, Watchman Room, Approach Road, Chain Link Fencing & Gate For Pump House Yard And Design, Supply And Installation Of Electro Mechanical Components Such As Required Capacity Of Pumps And Motors, Installation Of 11kv Electrical Sub-station With Express Feeder Line, And Design, Supply And Laying Of Ms Rising Main Pipeline, Gravity Mains And Delivery Chambers, Canal Crossing, Road Crossing, Railway Crossing / High Way Crossing By Pipe Jacking/horizontal Drilling Method, Road Restoration, Utility Shifting, Surge Analysis, Tanks Improvement Works & Facilitating For Land Acquisition, Crop Compensation, Obtaining Permissions From Concerned Departments And Other Statutory Clearance From The Competent Authorities For The Successful Running Of Lift Irrigation Scheme For Filling Of Water To The Designated Tanks, & Other Allied Components Including Operation & Maintenance For A Period Of Five Years After Successfully Commissioning Of The Scheme On Turnkey Basis.

Description: Pl No. 98050126] Scrap Cond./released/unserviceable Ms Scrap Such As Cbc Coupler Bodies, Angels Channels, Signal Rods, Crow Bar, Jim Crow, Cut Pieces Of Bogie Frames, Dash Pot, Yokes, Draft Gears Sets, Ms Sheets ,lever Rods, Pull Rods, Suspension Tube, Housing Axle Bearing, Chequered Plates, Cbc Operating Handle, Rel Hook, Anti Roll Bracket, Centering Disc, Center Pivot Washer, Brake Shoe Head, Center Pivot Ring, Side Frame Key, Adopter Narrow Jaw, Anti Roll Bar, Bolts & Nuts, Wear Plate, Adopter Wide Jaw, Suspension Rods ,equalizing Stay, Chain Hook, Rotary Shield With Bearings, Sab Parts, Ls Beam, Hangers, Brake Levers, Ms Plates Of Elastomeric Pad, Adapter Broken, Center Pivot Top, Anvil, Workout Sab, Cr Reservoir And Bracket, Plate Screws, Knuckle, Gear Wheel, Anchor Link, Brake Beam Cut Parts, Axle Box Housing, Bearing Plates, Riveted, Chair Plate, Ms Bed Plate, Ms Gauge Tie Plate, Structure Bar, Ms Tie Plates, Slide Chairs, Center Pivot, Knuckle, Adopter Narrow Jaw, Chain Trough, Vacuum Developer Assembly, Cutter Bar, Engine Liner, Air Filter Housing, Wear Plates, (bcm,frm,brm), Cutter Chain Links For Bcm Brake Cylinder, Bracket Chopper, Accumulator Hook, Compressor Set, Worn Lamping Tools Distribution Conveyor, Rollers. Lhb Draw Gear Slab, Brake Shoe Head, Locking Plate, Long Pull Rod, Cbc Lock, Cbc Yoke, Lower Spring Sheet Beam, Rail Tong, Center Beams, Center Pivot Washer, Screw Couplings, Center Beams, Cut Pieces Of Pipes, Buffer Plungers, Buffer Casings, Draw Gear Hooks, Cut Off Sheets, Iron Rods, Face Plate, And Other Items Coming Under Ms Scrap On As As Where Condition Available Under The Custody 08 Ward Note: 1.pick And Choose Of The Material Are Not Permitted. Loading To Be Started From One End And To Be Ended On Other End Only. (loc:bin No 0121 At Scrap Yard

Details: Construction Of Lift Irrigation Scheme To Fill Tanks In New Agrahara And Mirle Hobli Of K R Nagara Taluk & Saligrama Taluk In Mysuru District. Including Detailed Investigation & Conducting Survey, Design And Construction Of Civil Works Such As Intake Arrangement, Jack Well Cum Pump House, Watchman Room, Approach Road, Chain Link Fencing & Gate For Pump House Yard And Design, Supply And Installation Of Electro Mechanical Components Such As Required Capacity Of Pumps And Motors, Installation Of 11kv Electrical Sub-station With Express Feeder Line, And Design, Supply And Laying Of Ms Rising Main Pipeline, Gravity Mains And Delivery Chambers, Canal Crossing, Road Crossing, Railway Crossing / High Way Crossing By Pipe Jacking/horizontal Drilling Method, Road Restoration, Utility Shifting, Surge Analysis, Tanks Improvement Works & Facilitating For Land Acquisition, Crop Compensation, Obtaining Permissions From Concerned Departments And Other Statutory Clearance From The Competent Authorities For The Successful Running Of Lift Irrigation Scheme For Filling Of Water To The Designated Tanks, & Other Allied Components Including Operation & Maintenance For A Period Of Five Years After Successfully Commissioning Of The Scheme On Turnkey Basis.

Details: Contract Is For A Small Business Set Aside, Firm Fixed Price Contract Under Naics Code 332618. Rough Magnitude Of Value Of Less Than $25,000.00. Contractor Shall Provide All Labor, Equipment, And Materials Required To Properly Install Approximately 168 Linear Feet Of Chain Link Security Fence With Top Rail, Bottom Tension Wire, And Extension Arms With Three Strands Of Barbed Wire; And One (1) 4 Foot Wide By 8 Foot + 1foot Tall Walk Gate And One (1) 12 Foot Wide By 8 Foot + 1 Foot Tall Double Walk-through Gate. Note: Sam Is Completely Free Of Charge For Both Registrants And Users. All Contractors Shall Be Registered In Sam Prior To Submitting Your Quote And Before The Due Date. The Term Bid/quote/proposal Are Used Interchangeably In Industry And Will Be Sued Interchangeably Throughout This Solicitation. Quotes Received Via Faceimile Will Not Be Considered Regardless Of What Block 13 States. All Quotes Shall Be Received Through Piee. All Days Listed Are Calendar Days Unless Otherwise Specified As Business Days. Page Numbering May Not Be In Sequence.

Details: Design, Supplying, Fabrication, Erection and Commissioning of structural staging, RCC Foundation, Roofing, SMC-GFRP Panel Tanks for 0.25 lac gallons capacity, Construction of RCC Sump 0.25 gallons capacity, operators quarter/ pump house, 4 No. surface box in trenches for 100mm dia Sluice / Gate valves, Chain link fencing around various structures for newly proposed sites, Providing, Laying / fitting of 100/80/40/25/20mm dia GI pipes Electro Mechanical Equipments including Construction of 01 No. 250mm nominal dia casing gravel packed production well for Augmentation & improvement of water supply to various areas for Water Supply Scheme Gasoo under U.T. Capex. with Trial run for 06 months after completion of the construction work along-with O&M for 3 years on TURNKEY BASIS under UT CAPEX including conducting complete necessary soil tests as required at selected site, as per the Parameters/ Specification mentioned in the tender document, Architectural aesthetics shall also be kept in consideration to make the structures appealing. incld. 03 years O&M

Description: Shading the sandbox consists of installing steel columns with a length of 4000 mm and a diameter of 102 mm, placed in a concrete bed to a depth of 800 mm, so that safe distances from the game elements and the size of the impact surfaces according to the Czech Construction Code are maintained. The surface treatment of the columns is hot-dip galvanized and will be provided with a PVC seal. Shading sheets made of woven HDPE polyethylene, sand-colored, with dimensions according to the bill of quantities will be attached to the columns with a stainless steel chain with connecting links and a sleeve.

Description: 74080623 safety Chain To Be As Per Is 3076:1984 Grade T (8) Or Latest. The Specifications As Issued B y Rdso Are To Be Adhered To In Their Entirety Except That The Nominal Size (thickness) Of The Short Link Cha in Is To Be 13 Mm (?0.5mm) To 14 Mm (?0.5 Mm) And Long Links At Ends With Ring/suitable Locking Arrange ment For Padlocking Is To Be Of The Length Of 4.5 Meters. Further, The Length Of The Short Link Chains Is To B e Kept At 50 Mm And Width At 35 Mm. These Are Electrically Welded Round Steel Short Link Chains, Fully He at Treated And Tested And Comply With The General Conditions Of Acceptance Of Iso 1834 Or Latest. The Siz es Range From 5 To 45 Mm. (based On User Requirement). The Steel Used Shall Be Produced By The Open He arth Or Electric Process, Or By An Oxygen Blow Process. It Shall Be Steel Alloy. Marking Shall Be Done As Per is 3076:1984 Grade T(8) Or Latest. Supplier Shall Supply A Certificate Of Test And Examination Carried Out B y The Government Owned Lab Or Nabl Approved Labs With Every Supply Of Chain. There Should Be Name Of the Chain Maker, Grade Of Material, Size Of Chain, Identification Marking, Proof Force Applied To The Whole chain. No. Of Test Sample Taken, Breaking Force Of Each Sample, Total Ultimate Elongation At Fracture, Duri ng Manufacture The Heat Treated Chain Shall Be Subjected To Force Of 60% Of The Minimum Breaking Force. ] consignee All Sm On Aii Div., Nwr Rajasthan 173.00 Numbers