Tenders of Central Railway

Brake Head Assembly

Scrap Condemned Unserviceable Released Iron Cots With Wooden Planks And Foam Mattresses. Details- 1) Scrap Iron Cots With Wood Plank- 45 Nos. (approx. 1665 Kgs) 2) Scrap Foam Mattress- 30 Nos. (approx. 450 Kgs) Total Approx. Qty. = 75 Nos. (approx. Weight- 2115 Kg)

Finger Contact Segment Assembly

Condemned Released & Unserviceable Ferrous Parts I.e. Hub, V-ring, Disc Spring, Nut, Heads, End Ring Of Respectively Hs 15250, Tao 659, 4601az & 4303by, Armature & 6fra 6068 & 6fxa 7059 Rotor.

Set Of Ceiling Sheet Assemblies For Lhb Ac2t Coaches, As Per Drawing: Mplces2tel Version 7.

Scrap And Unserviceable Condenmed Misc Plastic Items Consisting Of Nylon Bushes, Upper And Lower Hyteral, Protective Tube ,strips,nylon Washer , Pads Of Sort And Sizes And Other Used Plastic Items Etc With Or Without Oil ,grease,dirt Etc. (qty.approx)

Aluminium Scrap Various Type Acsr Conductor, Bus Bar, Alu. Ladder In Unserviceable Condition. With Ms Attachment Approx. 30% Of Total Weight.

Scrap Condemned Overaged Unserviceable Ms+ci Material Consisting Of: 1)location Box(full Case)-22 Nos(approx. 4510 Kgs), 2)location Box(full Case)-26 Nos(approx. 3120 Kgs) 3)relay Rack-33 Nos(approx. 1980 Kgs) 4)battery Stand-195 Nos(approx. 2925 Kgs) 5)d Bracket-10nos(approx. 80 Kgs) 6)deflector-2 Nos(approx. 20 Kgs) 7)pedstall Without Motor-6 Nos(approx. 1110 Kgs) 8)boom Lock Stand-4 Nos(approx. 112 Kgs) 9)gate Sound Speaker-2 Nos(approx. 10 Kgs) 10)signal Protection Cover(jali)-8 Nos(approx. 48 Kgs) 11)surface Base M Signal-8 Nos(approx. 560 Kgs) 12)3 Aspect Unit(ci)-5nos(approx. 275 Kgs) 13)2 Aspect Unit(ci)-7nos (approx. 315 Kgs) 14)signal Ladder Various Size-11 Nos(approx. 198 Kgs) 15)dg Set Dsl Tank 50 Ltr Capacity-7 Nos(approx. 105 Kgs) 16)dg Set Dsl Tank 100 Ltr Capacity-3 Nos (approx. 48 Kgs) 17)gate Boom Pieces-11 Nos(approx. 110 Kgs) 18)released Ci&ms Scrap-42 Nos(approx. 2212 Kgs) 19)offset Bracket 140mm-6 Nos(approx. 270 Kgs) 20)calling On Unit-2 Nos(approx. 4 Kgs) 21)location Box Lock-53 Nos(approx. 159 Kg) 22)point Junction Box-5 Nos(approx. 75 Kgs) 23)point Rodding-12 Nos(approx. 180 Kgs) 24)shunt Signal Base-11 Nos(approx. 220 Kgs) 25)main Signal Post Various Size-13 Nos(approx. 845 Kgs) 26)idf Rack With Ladder-30 Nos(approx. 360 Kgs) 27)main Signal Back Staging-8 Nos(approx. 160 Kgs) 28)emty Drum 210 Ltr-42 Nos(approx. 1176 Kgs) 29)change Over Switch 32a-5nos(approx. 5 Kgs) 30)goods Warming Board-4 Nos(approx. 60 Kgs) 31)shunt Signal Unit-6 Nos(approx. 120 Kgs) 32)quarter Location Box-4 Nos(approx. 180 Kgs) 33)crank Handle Box-6 Nos(approx. 120 Kgs) 34)arbour Mt No3-1 Nos (approx. 0.090 Kgs) 35)auger 1/2'12mm-8 Nos(approx. 3.760 Kgs) 36)auger 16mm-4nos(approx. Approx. 1.920 Kgs) 37)auger 22mm-10 Nos(approx. 4.400 Kgs) 38)aauger7/8"-10 Nos(approx. 4.500 Kgs) 39)auger 7/8"3/4-5 Nos(approx. 2.250 Kgs) 40)drill Twist 17mm-2 Nos(approx. 0.440 Kgs) 41)drill Taper Shunk 31.75 Mm-2 Nos(approx. 1.5 Kg) 42)drill Twist 11.2mm-8 Nos(approx. 0.800 Kg) 43)drill Twist 12.2mm-8 Nos(approx. 0.800 Kg) 44)drill Twist 20.75mm-9 Nos(approx. 1.800 Kgs) 45)drill Twist 17.5mm-3 Nos(approx. 0.750 Kgs) 46)drill Twist 18.5mm-4 Nos(approx. 1.200 Kgs) 47)drill Twist 24.5mm-1 Nos(approx. 0.630 Kgs) 48)drill Twist 25mm-1 Nos(approx. 0.460 Kgs) 49)drill Twist 4.8mm-14 Nos(approx. 0.700 Kgs) 50)drill Twist 9.5mm-8 Nos(approx. 0.720 Kgs) 51)drill Twist 25.5mm-1 Nos(approx. 0.380 Kgs) 52)drill Twist 6.2mm-11 Nos(approx. 0.660 Kgs) 53)drill Taper Shunk 30.25mm- 4 Nos(approx. 3.60 Kgs) 54)drill Twist 12.5mm-1 Nos(approx. 0.150 Kgs) 55)drilling Machine Without Motor-1 Nos (approx. 30 Kgs) 56)drilling Machine Chain Type-6 Nos(approx. 210 Kgs) 57)grease Gun-2 Nos(approx. 3.60) 58)hammer Hand 7lbs-1 Nos(approx. 7 Kgs) 59)hammer Hand 1/2lbs-2 Nos(approx. 1 Kg) 60)hammer Sledge 2lbs- 6 Nos(approx. 3 Kg) 61)hammer Sledge 3lbs-3 Nos(approx. 4.50 Kgs) 62)hammer Sledge 5.4lbs-1 Nos(approx. 0.50kg) 63)hammer Sledge 5lbs- 2 Nos(approx. 11.60 Kgs) 64)hammer Sledge 4lbs- 12nos(approx. 21.60 Kgs) 65)noise Plier 6"-3 Nos(approx. 0.570 Kg) 66)plier Uninsulated 200mm- 4 Nos (approx. 0.800 Kg) 67)punches Figure- 1 Nos(approx. 0.920 Kg) 68)square Mason 24x12- 1 No(approx. 1 Kg) 69)punches Later A To Z-2 Nos(approx. 0.700 Kg) 70)ratchet Forace 14"- 1 No(approx. 3.500 Kgs) 71)screw Driver 12"-4 Nos(approx. 1.720 Kgs) 72)screw Driver 150mm- 4 Nos(approx. 1.720 Kgs) 73)screw Driver 18"-8 Nos(approx. 3.520 Kgs) 74)screw Driver 200mm-9 Nos(approx. 4.050 Kgs) 75)screw Driver 300mm-6 Nos(approx. 2.700 Kgs) 76)soldering Iron Tin Man-2 Nos(approx. 0.340 Kg) 77)spanner D/e 46x50- 10 Nos(approx. 15.500 Kg) 78)spanner Fish Bolt- 1nos(approx. 3.250 Kgs) 79)spanner D/e 41x46- 5 Nos(approx. 11 Kgs) 80)spanner Pop-3 Nos(approx. 2.400 Kg) Total Approx. Qty. - 22050 Kg (m.s - 20401 Kg + Ci - 1649 Kg)

Fixed Window For Lhb Coaches, As Per Drawing: Lw54137 Alt C And Follow Design Office L.no. Md35131 Dated 26/12/2022. Material To Be Procure From Rcf Approved Sources Only. Rcf Item Id: 2400001

770802070019 fluropolymer(fluoroethylene) With Dft Of 25 +10/-0 Microns With Shade To Ral-7012(bas alt Grey) To Be Done As Per Japanese Industrial Standard Jis K 5659: 2008-class-1.( Top Coat) [ Warranty P eriod: 30 Months After The Date Of Delivery ] ] consignee Paint Shop Mtn, Cr Maharashtra 2100.00 Litre uvam Item Ref. ( Item Id :- 2300212 - Epoxy Cum Polyurethane Painting System (two Pack) for The Exterior Painting Of Railway Coaches, Diesel And Electric Locomotives and Other Industrial Applications ) inspection Details Stage Inspection Not Required